该页无缩略图
R &D department
Ourresearch and development work is thecolective wisdomof allemployees,focusing on thecustomer's suggestionsand needs,andconstantlydevelopingtheproductswithcientificandtechnologicalcontent.TheR&Dteamisjoinedbymacinetool designtalents withmanyyears experiences,coupled with innovative young engineersand engineers withyears manufacturing experiences.Wehave independent intellectual propertyrights forallnewproducts.Everyproductmustbe introduced tothe market after very rigorous testing.
Production and quality control
Althe important partsof turretare manufactured byourself.Qualitycontrolruns through theproduction process from the beginning totheend.Eachfinishedturetmustbetestedinaccordancewiththequalitycontrolprocedures beforeleaving the factory.
Sales and after sales service
Our sales are guided by needs of customers.The sales department constantly summarizes the suggestions of customers, promotes theconstructionofthesales network tomeettheneedsofeachcustomer,keepagoodrelationshipwithcustomers, tounderstandthecurrentand future needs ofcustomers,andto become their expected partner.We provide professional educationandtechnicaltrainingtoafter-salesserviceengineertoensure thattheycanbecome theexpertinthefieldandmeet customers’ service needs.
Focus on scientific and technological innovation and progress
CONTENTS
| 01 | Y-AXIS POWERD TURRET | ||
| TCSY16.140.50-12 | TCSYL16.140.50-12 | TCSY16H165.50-12 | |
| TCSY20.185.75-12 | TCSYL20.185.75-12 | TCSY20H195.75-12 | |
08 POWEREDTURRET TCSD80B-12 TCSD100B-12 TCSD125B-12
12 HYDRAULIC SERVO TURRET TCS-50 TCS-63B TCS-80B TCS-100B TCS-125 TCS-160
Y-AXISPOWERD TURRET
Outstanding Features
The compact Y-axis adopt built-in power-turret structure ，with wide sliding guide-ways, small volume,less interference and strong rigidity.Can be assembled and integrated on any size of standard turning machines,flat or slant bed
Adopt larger diameter double-end Support Precision ball Screw (ISO3,C30)， Positioning accuracy up to 0.01mm
± 50 nominal stroke ,combined with BMT tooling system， with wide processing range and flexible & convenient use
Double hydraulic locking system that allow either hard milling or turning operations
| MODEL | TCSDY16H165 | TCSDY20H195 | ||
| Width of opposite edge of cutter head | mm | 330/350 | 400 | |
| Tooling size | BMT | 45/55 | 55/65 | |
| Number of tools | N | 12T | 12T | |
| Maximum carrying inertia | Kgm2 | 2.5 | 10 | |
| Power output interface | DIN1809 | DIN1809 | ||
| Tool gear speed ratio | 1:1 | 1:1 | ||
| Powered motor max speed | rpm | 5000 | 5000 | |
| Powered motor max output torque | NM | 25 | 40 | |
| Gear speed ratio | 48:1 | 80:1 | ||
| Servo motor speed | rpm | 3000 | 3000 | |
| Servo motor power | Kw | 0.75 | 0.75 | |
| Servo motor minimum acceleration and deceleration time | s | 0.5 | 0.5 | |
| Tool selection direction | cW/cCW | cW/cCW | ||
| * Simplex indexing time (release - Transposition - clamp) | s | 0.8 | 1.0 | |
| Turn 90 time | s | 0.5 | 0.6 | |
| Indexing frequency (90 inversion) | min1 | 18 | 15 | |
| Hydraulic working pressure | MPa | 3.5 | 3.5 | |
| Flow rate | L/min | 18 | 24 | |
| Indexing accuracy | s | +4 | +4 | |
| Repeatibility accuracy | s | 1.6 | 1.6 | |
| Ambient temperature | 5~40 | 5~40 | ||
| Cutting fluid pressure (filtration accuracy) 100m | Disconnect during transposition | MPa | 2 | 2 |
| Keep on opening while transposing | MPa | 0.7 | 0.7 | |
| Protection class | IP65 | IP65 | ||
| Y" axis | ||||
| Type1 motor torque | NM | 4 | 8 | |
| Type1 motor Gear speed ratio | 1:2 | 1:2 | ||
| Type2 motor torque (optional) | NM | 8 | 16 | |
| Type2 motor Gear speed ratio(optional) | 1:1 | 1:1 | ||
| Max speed in Y direction | m/min | 10 | 10 | |
| Nominal stroke | mm | +45 | 70 | |
| Limit stroke | mm | 50 | 75 | |
| Screw diameter | mm | 32 | 40 | |
| Lead screw pitch | mm | 5 | 5 | |
| Lead screw accuracy | Iso | 3 | 3 | |
| Max feed force in Y direction | KN | 10 | 18 | |
| Hydraulic brake max oil pressure (YC1) | Mpa | 4.5 | 4.5 | |
| Hydraulic brake max oil pressure (YC2) | Mpa | 3.5 | 3.5 | |
| Dorsal space | um | 20 | 20 | |
| position accuracy | um | 20 | 20 | |
| N.W. (With cutter plate opposite side 350) | Kg | 235 | 350 | |
Y-AXISPOWERDTURRET
Outstanding Features
Newproduct, integrated Y-axis power turret
With hard, high rigidity guideway. Turret combined with Y axis. Can
be used on flat or slant bed CNC lathe
Patented locking mechanism can guarantee best rigidity for turning
andmilling， either with normal or power tool holders
Long stroke, BMT tooling system, allow turning at front and back
The Y axis unit enhances the ability of turning and milling, can do
turning，milling，drilling, tapping， keyway
| MODEL | TCSY16/TCSYL16.140.50 | TCSY20/TCSYL20.185.75 | |
| Center height | mm | 140 | 185 |
| Width of opposite edge of cutter head | mm | 295/330 | 330 |
| Number of tools | N | 12T | 12T |
| Tooling size | BMT | 45/55 | 55 |
| Tool gear speed ratioe | 1:1 | 1:1 | |
| Powered motor max speed | rpm | 5000 | 5000 |
| Rated torque output of power motor | NM | 10 | 15 |
| Powered motor max output torque | NM | 25 | 40 |
| Gear speed ratio | 45:1 | 63:1 | |
| Servo motor speede | rpm | 3000 | 3000 |
| Servo motor power. | Kw | 0.75 | 0.75 |
| Repeatibility accuracye | s | 1.6 | +1.6 |
| Indexing accuracy | s | +4 | +4 |
| Type1 motor torque | NM | 4 | 8 |
| Type1 motor Gear speed ratio | 1:2 | 1:2 | |
| Type2 motor torque (optional) | NM | 8 | 16 |
| Type2 motor Gear speed ratio(optional) | 1:1 | 1:1 | |
| Ball screw diameter x pitche | mm | 32x5 | 40x5 |
| Max speed in Y direction. | m/min | 10 | 10 |
| Nominal stroke | mm | 50 | +75 |
| Max feed force in Y direction | KN | 10 | 18 |
| Hydraulic brake max oil pressure | MPa | 5 | 5 |
| Dorsal space | um | 20 | 20 |
| position accuracy | um | 20 | s 20 |
| Protection class | IP65 | IP65 | |
| N.W. | Kg | 190 | 310 |
POWERED TURRET
Outstanding Features
With two pcs curvic coupling and hydraulic locking system guarantee the high rigidity, suitable for heavy machining Max. speed of power tool holder is 5000/6000 rpm BMT toolingsystem DIN1809
TCSD80B-12
TCSD100B-12
TCSD125B-12
| MODEL | TCSD70P/TCSD70PL | TCSD80B | TCSD100B | TCSD125B | ||
| Center height | mm | 70 | 80 | 100 | 125 | |
| Width of opposite edge of cutter head | mm | 248 | 295 | 295/330/350 | 330/380 | 400/440 |
| Number of tools | N | 12T | 12T | 12T | 12T | |
| Tooling size | BMT | 40 | 45 | 45/55 | 55/65 | 65/75 |
| Tool gear speed ratio | 1:1 | 1:1 | 1:1 | 1:1 | ||
| Powered motor max speed | rpm | 5000 | 5000 | 5000 | 5000 | |
| Rated torque output of power motor | NM | 10 | 10 | 15 | 23 | |
| Powered motor max output torque | NM | 25 | 25 | 40 | 70 | |
| Gear speed ratio | 42:1 | 48:1 | 64:1 | 80:1 | ||
| Servo motor speed | rpm | 3000 | 3000 | 3000 | 3000 | |
| Servo motor power | Kw | 0.75 | 0.75 | 0.75 | 0.75 | |
| Servo motor minimum acceleration and deceleration time | s | 0.5 | 0.5 | 0.5 | 0.5 | |
| Tool selection direction | cW/cCW | cW/cCW | cW/cCW | cW/ccw | ||
| Rotating time (tool to tool) | s | 0.45 | 0.5 | 0.5 | 0.65 | |
| Rotating time (including locking) | s | 0.55 | 0.6 | 0.6 | 0.8 | |
| Total indexing time for 180 | s | 0.65 | 0.7 | 0.7 | 0.85 | |
| Total indexing time for 180 | s | 0.75 | 0.8 | 0.8 | 1.0 | |
| Curvic couplings type | 3 Piece | 2 Piece | 3 Piece | 3 Piece | ||
| Indexing frequency (90 inversion) | min' | 20 | 18 | 15 | 15 | |
| Hydraulic working pressure | MPa | 3.5 | 3.5 | 3.5 | 3.5 | |
| Flow rate | L/min | 16 | 18 | 20 | 30 | |
| Indexing accuracy | s | +4 | +4 | +4 | +4 | |
| Repeatibility accuracy | s | 1.6 | 1.6 | 1.6 | 1.6 | |
| Ambient temperature | c | 5~40 | 5~40 | 5~40 | 5~40 | |
| Cutting fluid pressure (filtration accuracy) 100m | Discopnect uing | MPa | 2 | 2 | 2 | 2 |
| Keep onopening | MPa | 0.7 | 0.7 | 0.7 | 0.7 | |
| Protection class | IP65 | IP65 | IP65 | IP65 | ||
| N.W. | Kg | 90 | 102 | 145 | 230 | |
HYDRAULIC SERVOTURRET
Outstanding Features
Very highrotatespeedwithmin. indexingtime
High rigidity, durability and low noise
Bi-direction rotate, double sensor for locking and unlocking status
Tool disc of 6T, 8T,10T, 12T is optional
AcceptOEM/ODMorder
TCS50-8
TCS63B-8
| MODEL | TCS50 | TCS63B | TCS80B | TCS100B | TCS125 | TCS160 | ||
| Center height mm | 50 | 63 | 80 | 100 | 125 | 160 | ||
| Number of tools | N | 8T | 8T/12T | 8T/10T/12T | 8T/10T/12T | 8T/12T | 8T/12T | |
| Gear speed ratio | 6:1 | 24:1 | 36:1 | 48:1 | 36:1 | 57:1 | ||
| Servo motor speed | rpm | 3000 | 3000 | 3000 | 3000 | 2000 | 2000 | |
| Servo motor power | Kw | 0.4 | 0.75 | 0.75 | 0.75 | 1 | 1 | |
| Tool selection direction | cW/cCW | cW/cCW | cW/cCW | cW/cCW | cW/CCW | cW/ccW | ||
| Rotating time (tool to tool). | 0.4 | 0.4 | 0.45 | 0.45 | 0.6 | 0.7 | ||
| Rotating time (including locking). | s 0.5 s | 0.5 | 0.55 | 0.55 | 0.75 | 0.9 | ||
| Total indexing time for 180 | 0.6 | 0.6 | 0.65 | 0.65 | 0.8 | 0.9 | ||
| Total indexing time for 180 (including locking) | 0.7 | 0.7 | 0.75 | 0.75 | 0.95 | 1.15 | ||
| Curvic couplings type | 2piece | 3piece | 3piece | 3piece | 3piece | 3piece | ||
| Indexing frequency (90 inversion) | min1 25 | 20 | 18 15 | 15 | 15 | |||
| Hydraulic working pressure. | MPa | 3.5 | 3.5 | 3.5 | 3.5 3.5 | 3.5 | ||
| Flow rate | L/min | 18 | 20 | 20 | 20 30 | 30 | ||
| Thrusting force of hyd.cyl. | kgf | 560 | 1800 | 3100 | 4100 7500 | 11000 | ||
| Accuracy of repeatability | mm 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | 0.003 | ||
| Ambient temperature | oC | 5~40 | 5~40 | 5~40 | 5~40 | 5~40 | 5~40 | |
| Cutting fluid pressure (filtration accuracy) 100m | Disconect uringng | MPa | 2 | 2 | 2 | 2 | 2 | 2 |
| Kelp on opening | MPa | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | |
| Protection class | IP65 | IP65 | IP65 | IP65 | IP65 | IP65 | ||
| N.W. | Kg | 40 | 65 | 105 | 135 | 220 | 395 | |
Turret Disc Size And Accessories
| 8T | mm | 178 | 228/248 | 280/300 | 330/350 | 380/420 | 480 |
| 10T | mm | 330 | 420 | ||||
| 12T | mm | 290 | 330 | 380/420 | 440 | 540 | |
| O.D.Tool | mm | 16 | 20 | 25 | 25 | 32 | 32 |
| Facing Tool | mm | 16 | 20 | 25 | 25 | 32 | 32 |
| Boring Tool | mm | $20 | $25 | $32 | $40 | $50 | $50 |
BMT45-330
BMT55-330
CUSTOMIZABLECUTTERHEADOPTIONS
Tool Discs
In view of our rich manufacturing experience, CHEN-SHIN Technology isable to designand manufacture various cutter heads to bettermeet the needs of customers. Starting with the well-known cutter heads that are compatible with DlN69880,many other solutions are available, such as special versions of slot, BMT,VDl for different types of quick tool change systems.
Rotating Toolholders
As a pioneer in power tool holder design, CHEN-SHINTechnology is able to offer a range of VDl and BMT models that combine high energy, precision and silence for optimal results in tool tower systems.
We can offer a wide range of products from DIN 69880(VDl) tool holder to BMT tool holder， different clamping units (ER spring chuck system, tapping chuck， miling chuck and Capto chuck system)， as well as DlN5480,1809 and other standard or special powerdriveinterfaces
CHEN-SHIN Intelligent Manufacturing Technology Co., Ltd.
Add：Xinnan Industrial Park,Yaoguan Town,Economic
Development Zone, Changzhou City,Jiangsu Province
Tel:0519-89857951
Fax：0519-89857952
chenshin.index@gmail.com
Web：www.chenshin-turret.cn The company reserves the right to modify or discontinue specifications and equipment.
The specifications in the illustration may not match the actual equipment; the actual equipment shall prevail.
