BONADA/ 07 BONADA/ 08 由于不断改善及研发功能，机器外观、性能特点及技术参数如有更改，恕不另行通知。
Because of the non-stop improving of machine and development of new functions,appearance and specification is subject to change without notice.
由于不断改善及研发功能，机器外观、性能特点及技术参数如有更改，恕不另行通知。
Because of the non-stop improving of machine and development of new functions,appearance and specification is subject to change without notice.
Http://www.bonada-machine.com E-mail: info@bonada-machine.com
主要技术参数 Main Technical Parameters
SJ45×2-700
Ф45+45
28：1
15-100r/min
15kw
45kg/h
Ф70
0.01-0.10mm
600mm
34kw
3000×2500×4200mm
2.4T
SJ50×2-900
Ф50+50
28：1
15-100r/min
18.5kw
55kg/h
Ф100
0.01-0.10mm
800mm
38kw
3500×3000×4500mm
3.0T
型号
螺杆直径
螺杆长径比
螺杆转速
主电机功率
单挤出机产量
模口规格
薄膜厚度单面
薄膜最大折径
电器总容量
外形尺寸
机器重量
Model
Screw Diameter
Screw Ratio L/D
Screw Speed
Main Motor Power
Extrusion Output(Single)
Range of Die-tip
Single Layer Thickness of Film
Max Layflat Width of Film
Installation Capactity
Overall Dimension
Weight of Machine
NO.09
SJ45×2, SJ50×2 PE 双色彩条吹膜机
SJ45×2, SJ50×2 PE Double Color Strip Film Blowing
Machine Set
用途：
我厂生产的双模头彩条吹膜机组是由两条螺杆料筒和一只模头组合而成,采用两种母料配置,
吹制种规格的彩条背心袋(采购袋)不需要印刷就能够达到彩色化,具有色彩鲜艳、线条均匀、
结构合理、工艺先进、收卷平整、生产量高等特点。
1、整机由一套传动主机、两条料筒和一只模头组成，通过两面三刀条料筒送料，一个模头
同时挤出，牵引卷取装置，可以有效提高彩条薄膜的产量。
2、螺杆、料筒采用38CrMoAl,经过氮化处理和精密加工而成，硬度高，耐度高，耐腐蚀性
强，经久耐用。
3、模头镀硬铬，其结构为螺旋芯轴式，挤出的熔融料均匀，吹制的薄膜光洁度好，风冷装
置结构为迷宫型，出风量均匀。
4、卷取装置采用压力摩擦收卷或中心收卷，采用力矩电机调节，收卷平整，换卷方便。
选择性配件：
Option Equipments:
自动吸料机
Auto Loaders
Use:
Our factory PE Double Color Strip Film Blowing
Machine Set consist of two sets screw and barrel,
one die-head, use two types raw material with
different color masterbatch. It’s used for blowing
kinds of size T-shirt bags(carry shopping bags)
film. It can produce colorful plastic film without printing,
it can make the plastic film in bright color uniform
lines, reasonable structure, advanced technology,
even rewinding roll, high output etc. characters
1.The whole machine consist of one set main driving
system,two sets extruder, and one die-head. Two
sided article mitoya barrel, and one die head for
extrusion same time. Take-up andrewinding device,
it can increase the film quality.
2.Screw and barrel use 38CrMoAli/ SACM-645,
produced by nitrogen treatment and precision
processing. High hardness, resistance and high
corrosion resistance, and durability.
3.Die head hard chromium plating, owns the mandral
spiral structure, melt extrusion material uniform,
good surface finish, air cooling device adopts the
maze type, owns the stable normalairflow rate.
4.The rewinding system adopts the friction type or
center type rewinder. The tension is controlled by
torque motor, it can rewind the film evenly, and eacy
for roller changing.
SJ60-FM600, SJ65-FM700, SJ70-FM900 Double
Die-head Film Blowing Machine Set
型号 Model
Screw Diameter
Max. Layflat of Film
Roller Width
Max. Extrusion Output
Main Motor Power
Max. Outpu
SJ60-FM600
500mm
600mm
28:1
60Kg/h
Φ65mm
SJ65-FM700
600mm
700mm
28:1
70Kg/h
SJ70-FM900
800mm
900mm
28:1
100Kg/h
主要技术参数 Main Technical Parameters
薄膜最大直径
辊筒宽度
螺杆长径比
主电机功率
最大产量
螺杆直径 Φ60mm
18.5KW 22KW
Φ70mm
30KW
Die-head Size(mm)
Total Power Required
Power Source
Film Thickness(Single layer)
Overall Dimension(L*W*H)
44KW
0.008-0.10mm
Φ80*2 sets
Φ120*2 sets
52KW
0.008-0.10mm
70KW
0.008-0.10mm
总功率
电源
模头尺寸 Φ60*2 sets
Φ100*2 sets
4000×3500×4000mm 4500×4000×4200mm
Φ100*2 sets
Φ150*2 sets
5000×4500×4500mm
薄膜厚度
外形尺寸
380V, 3Phases, 50HZ or According to customer’s requirement.
SJ60-FM600, SJ65-FM700, SJ70-FM900 双模头吹膜机组
NO.10
特点：
挤出机的机筒、螺杆采用优质合金钢经氮化和精密加工，具有最佳硬度和
耐腐蚀性，本机组经科学设计一套挤出两付机头，提高生产量节省能源、劳
动力、生产厂房等优点。
用途：
用于吹制低密度聚乙烯（LDPE）高密度聚乙烯（HDPE）塑料薄膜。
可制成各种背心袋、平品袋、广泛就用于食品服装、纺织、工业等包装。
Use:
This machine set is used for blowing Low-density Polyethylene
(LDPE) and high-density Polyethylene (HDPE) plastic film
to make various and flat-rimbags which have been widely
used for packing in the food industry, garment industry
and textile industry,etc.
1. The full set machine is made of two sets main motors,
two cylinders and one layer die head, feeding by two
cylinders. Extruding with one die head one traction
and rewinding device , it can improve the quality of
striped film by adopting with one traction and one
rewinding device.
2. The screw stem and cylinder ate made of 38CrMoAl
high quality alloy steel after fine finishing and nitrided
treatment, which has high hardness, strong resistance
to corrosion, durable service.
3. The die head is plated with hard chrome ,of screw man
drel type structure with even and smooth discharging,
the blown plastic film has fine finishing ,the blower is
of labyrinth structure with even air output.
4. The coiling unit adopts pressure friction rewinding or
center rewinding , which is driven by torque motor ,
with even and smooth rewinding and easy roll changing.
Feature:
RUIAN BONADA I/E INDUSTRIAL CO., LTD.
