For more details visit www.marinemegastore.com or call 0871 8732404 FUEL 89

FUEL VENTS 66031 66032

Enhanced 316 Stainless Steel Alloy Flush-Mount Aftermarket 66004

Packaging* 66023

On the exterior, they have a smooth edge over the competition. Unlike some others, there 66031-3 1615

is no protruding cap to cause damage — or be damaged by — hull bumps and scrapes. 66032-3

Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of

entire fuel system. These vents now include two silicone gaskets. *Skin Pack

Description Hose Maximum Installation Bulk

Straight Vent Size Hull Thickness Hole Size Packaging

90° Vent

5\/8\" I.D. 7\/8\" 13\/8\" 66031-1

5\/8\" I.D. 7\/8\" 13\/8\" 66032-1

Enhanced 316 Stainless Steel Alloy

Stainless steel vents with spark-proof screen holes.

Description Hose Maximum Installation Bulk Aftermarket

Size Hull Thickness Hole Size Packaging Packaging*

Straight Vent 5\/8\" I.D. 1\/2\" 7\/8\" 66004-1 66004-3

90° Vent 5\/8\" I.D. 1\/2\" 7\/8\" 66023-1 —

*Skin Pack

Chrome-Plated Zinc

Chrome-plated zinc vents with spark-proof holes.

Description Hose Maximum Installation Bulk Aftermarket

Size Hull Thickness Hole Size Packaging Packaging*

Straight Vent 5\/8\" I.D. 7\/8\" 3\/4\" 1615-1 —

*Skin Pack

Polypropylene

Patented splash-resistant, corrosion-resistant polypropylene.

Description Hose Maximum Installation Bulk Aftermarket 1607

Color Size Hull Thickness Hole Size Packaging Packaging* 1607A1

Straight Vent Black 5\/8\" I.D. 7\/8\" 3\/4\" 1607-1 1607-3

White 5\/8\" I.D. 7\/8\" 3\/4\" 1607A1 —

*Skin Pack

For more details visit www.marinemegastore.com or call 0871 8732404 65

90 FUEL For more details visit www.marinemegastore.com or call 0871 8732404

P-Trap Fuel Surge Protector

Eliminates the need to install a fuel line vent and a surge protector—now one product helps avoid fuel spills, provides fuel

tank venting, and resists water intrusion into the fuel system. Meets ABYC Standards.

• Operates in any orientation within 45° of vertical

• Withstands oil, gas, alcohol-blended and ethanol blended fuels

• Constructed of glass-filled polypropylene

Surge Protection

• Inertia of surging fuel drives the surge ball up against the upper seat, closing the large vent opening. Passage is limited to

the smaller openings, which reduces fuel flow and minimizes spillage. When the vent line becomes full it helps the

automatic fuel nozzles to shut off.

• Venting

• Without fuel inertia, the surge ball remains at rest, allowing unrestricted venting through all openings.

• Water Intrusion Protection

• Baffles resist water from entering vent line and fuel tank during normal sea conditions and washdowns.

Standard Mount Flush Mount

1680

1684

1684

1680 Dimensions

Description A B C D E FG H I

Standard Mount

Flush Mount Standard 27\/8\" 31\/4\" 21\/16\" 11\/4\" 5\/8\" 1\" 21\/4\" 31\/8\" 9\/16\"

Flush 27\/8\" 31\/4\" 21\/16\" 11\/4\" 5\/8\" 1\/4\" 21\/4\" 31\/8\" 1\/4\"

Hose I.D. Maximum Installation Vent Head Bulk Aftermarket

5\/8\" Hull Thickness Hole Size Black plastic Packaging Packaging*

Stainless steel

5\/8\" 9\/16\" 3\/4\" Stainless Steel 1680-1 —

—

1\/4\" 13\/8\" 1682-1 1684-6

1684-1 *Individual Carton

For more details visit www.marinemegastore.com or call 0871 8732404 66

For more details visit www.marinemegastore.com or call 0871 8732404 FUEL 91

Fuel Vent Line Surge Protector

Helps avoid refueling spills because the surge helps the automatic fuel nozzles to shut off as the tank fills. Meets ABYC

Standard. Glass-filled polypropylene construction and surge-ball design. Installs in-line with traditional 5\/8\" I.D. vent hose tank

systems. Withstands oil, gas, and alcohol-blended fuels. Compact size allows installation inside gunwale in any orientation

within 45° of vertical. Includes two hose clamps.

Description Description Bulk Aftermarket 1675

5\/8\" I.D. hose Black plastic vent head Packaging Packaging* 1670

1675-1 1675-6 1674

12822

*Blister Pack

90° P-Trap Fuel Tank Vents

These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and

washdowns. This eliminates the need for an anti-siphon loop in the vent hose. For 5\/8\" I.D. hose. Meets ABYC Standard.

The arrows in this cross-section show the baffled route that

water would have to travel in order to reach the fuel vent hose.

3-1\/8\"

1-1\/2\"

3-1\/4\"

Standard Mount 1\/4\"

Flush Mount

Maximum Installation

Hull Hole Bulk Aftermarket

Packaging Packaging*

Description Thickness Size Style 1670-1 1670-3

1671-1

Standard Mount - 5\/8\" I.D Hose 9\/16\" 3\/4\" Black with black vent head 66419-1 —

911347 66419-3

Black with white vent head 911526-1

911527-1 —

Black with stainless steel trim cover 911528-1 —

1674-1 —

Gasket —

911507 1674-6

Replacement covers For 1670 911508

—

For 1671 —

For 66419 *Skin Pack

Flush Mount - 5\/8\" I.D. Hose 1\/4\" 3\/4\" Black with stainless steel vent head

Spacer 1\/4\" - 1\/2\" For 1674\/1684

1\/2\" - 3\/4\" For 1674\/1684

Motor Well Boot

Motor well boot provides organized, covered pass-thru for control cables, wires, or fuel lines. Split side allows for installation

without disconnecting controls. Includes tie for secure fit. Black rubber, UV-resistant construction with polypropylene

attachment gasket ring.

Description Bulk Aftermarket

Packaging Packaging*

For 3\"-diameter opening — 12822-5

For 4\"-diameter opening — 12820-5

*Poly Bag

For more details visit www.marinemegastore.com or call 0871 8732404 67

92 FUEL For more details visit www.marinemegastore.com or call 0871 8732404

CARBON CANISTERS

In order to help the marine industry make the challenging transition to CARB and EPA compliant fuel systems

Attwood is proud to announce the launch of our first generation Marine Carbon Canister program as well as

the launch of the development of the Next Generation Marine Fuel System.

While marine fuel systems have remained relatively simple and unchanged for many years, new regulations

will require an increase in their complexity to function effectively. Attwood is working to optimize the

functionality, cost effectiveness and safety of future fuel systems to ensure that the industry is prepared to

handle this significant challenge

Attwood’s patent pending Carbon Canisters are designed and constructed using the highest grade materials including marine grade

carbon and low-permeation plastics for the housing. They are designed to withstand the harsh conditions found in the most extreme

marine environments. and are capable of withstanding severe hull torque, vibration and “shock-loads” that will last for the lifetime of

the vessel. Our robotically welded canisters are manufactured to ensure that 100% of Attwood’s Carbon Canisters are properly sealed

100% of the time and will withstand the most severe abuse.

Attwood’s Carbon Canisters are the only canisters that meet ABYC’s proposed self-draining requirement due to the unique orientation

of the canister ports. Additionally, the mounting tab allows for the canisters orientation to be reversed easing installation.

Attwood’s low-permeation canister helps your vessel reduce the diurnal emissions associate with daily temperature cycles but also

eliminates the permeation of hydrocarbons thru the shell of the canister helping to ensure that your vessel is in compliance with the

permeation limits set forth by CARB and the EPA. Attwood’s Carbon Canister is the only canister available that reduces both of these

sources of hydrocarbon pollution.

Attwood Carbon Canisters are designed using patented technology to ensure that carbon particles cannot

break down and reach your fuel system protecting the life of your engine. Our Carbon Canisters are

proudly made in the USA and are warranted for five years from the date of purchase.

A Carbon Canister Sizing Versus Fuel Tank Size

B

TRAILERABLE NON-TRAILERABLE 99520

Dimensions Canister (Liters) Tank (Gallons) Canister (Liters) Tank (Gallons)

5.05 1 < 25 1 62

3.00

1.5 37 1.5 93

2 50 2 125

3 75 3 187

4 100 4 250

Formula (Round up to the next largest size)

LitersCC = 0.04 x Fuel Tank LitersCC = 0.06 x Fuel Tank

Description Dimensions Bulk Aftermarket

AB Packaging Packaging

CARBON CANISTER 99510-1 —

99515-1 —

1.0 Liter 12.08\" 10.97\" 99520-1 —

1.5 Liter 15.0\" 13.77\" 99530-1 —

2.0 Liter 17.68\" 16.57\" 99540-1 —

3.0 Liter 23.29\" 22.18\"

4.0 Liter 28.90\" 27.79\" 99510HS1 —

99515HS1 —

HEAT SHIELD FOR CARBON CANISTER 99520HS1 —

1.0 Liter 99530HS1 —

1.5 Liter 99540HS1 —

2.0 Liter

3.0 Liter

4.0 Liter

For more details visit www.marinemegastore.com or call 0871 8732404 68

For more details visit www.marinemegastore.com or call 0871 8732404 FUEL 93

Hydro-Stabilizer Hydro-Stabilizer Ordinary Hydro-Foil 9400

Gives outboards and stern drives a Description Bulk Aftermarket 11664

performance boost, improving both For outboards and stern drives 50 Packaging Packaging* 11890

stability and handling. The Hydro- horsepower and above

Stabilizer out-performs ordinary flat For outboards under 50 horsepower — 9400-7

hydrofoils by reducing drag when the hull

goes on plane. Installs on a large variety — 9401-7

of motor styles and sizes and includes *Clamshell (9400) or Individual Carton (9401)

stainless steel bolts and lock nuts. Wings

constructed of black molded plastic. The

Hydro-Stabilizer quickly puts the boat on

plane and helps pull skiers out of the hole

faster. Even at lower RPMs, it keeps the

boat on plane. The wings provide a

smoother, more stable ride and reduces

ventilation in turns.

Outboard Motor Safety Cable

Prevents loss of small outboard engines. Description Bulk Aftermarket

Clear vinyl-coated, heavy-duty steel cable. 3\/32\" dia. x 50\" long Packaging Packaging*

Has a loop on one end, and includes a

snap hook on the other end. 3\/32\" — 11664-3

diameter, 50\" long. *Skin Pack

Oil Change Pump Description Bulk Aftermarket

Oil change pump Packaging Packaging*

Provides clean method of emptying oil

from inboards and inboard\/outboard — 11890-7

engines. Fits dipstick tube of engines. *Clam Shell

Chemical resistant plastic pump and two

removable pliable tubes. Pump can be

dis-assembled for cleaning or repairs.

Gear Lube Pump Description Bulk Aftermarket

Gear Lube Pump Packaging Packaging*

For use with 32 oz. gear lube

bottles. The pump fits any outboard — 11891D7

or sterndrive and includes one *Clam Shell

Yamaha® adapter.

Universal Motor Flusher 11891D7

16207

Quickly flushes away salt, sand, silt, and alkali to prevent

clogging and corrosion. The flusher attaches easily to an

ordinary garden hose. Reinforced polypropylene. Self-

adjusting clamping yoke fits most domestic or imported I\/O’s

and outboards. Molded cups deliver fresh water from a

garden hose to flush the cooling system through side intakes

on the lower unit. Note: Do not use full flow from hose.

9372 16205

Description Bulk Aftermarket

Round with plastic body Packaging Packaging*

Round with metal body

Rectangular motor flusher — 9372-2

— 16205-5

— 16207-2

*Hang Tag (9372, 16207) or Poly Bag (16205)

For more details visit www.marinemegastore.com or call 0871 8732404 69

For more details visit www.marinemegastore.com or call 0871 8732404

GENERAL MARINE ACCESSORIES

ANCHORING & MOORING · MARINE ROPE · ROD HOLDERS & ACCESSORIES

MARINE CLEANERS · INTERIOR & BOATING ACCESSORIES · ELECTRICAL

TRAILERING · TRANSOM SAVERS · TIE-DOWN STRAPS

For more details visit www.marinemegastore.com or call 0871 8732404 70

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 95

ANCHORING AND MOORING EQUIPMENT

Mushroom Anchors

Mushroom anchors are an economical solution for light-weight boats. The wide-area mushroom cup provides sufficient

holding power in mud and weed bottoms

• Gray cast iron

• Large, steel eye

• Available coated with aluminum-painted finish or black PVC coated finish

Description Description Bulk Aftermarket

PackagingΔ Packaging*

Aluminum - painted 8 lbs. 9941-1 9941-2

10 lbs. 9942-1 9942-2

15 lbs. 9943-1 9943-2

Black PVC-coated 8 lbs. 9941B1 9941B2 9943

10 lbs. 9942B2 9942B2

15 lbs. 9943B2 9943B2

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag

Navy Anchors

Navy anchors combine weight with flukes to dig in and hold firmly in sand and mud. The reverse action of the shank allows

quick retrieval of a fouled anchor. High-quality gray iron casting, available with aluminum-painted or black PVC-coated finish.

Description Description Bulk Aftermarket

PackagingΔ Packaging*

Aluminum - painted 10 lbs. 9933-1 9933-2

15 lbs. 9934-1 9934-2

20 lbs. 9935-1 9935-2

Black PVC-coated 10 lbs. 9933B1 9933B2

15 lbs. 9934B1 9934B2

20 lbs. 9935B1 9935B2

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag 9935

River Anchors—Cast 9948

9948B

River anchors catch and hold river bottoms where mud, rocks, stumps, and brush are present. Flukes act like a grappling

hook to snag rocks or other objects. Gray cast iron with a large, steel eye and black PVC-coated or painted finish.

Description Description Bulk Aftermarket

PackagingΔ Packaging*

Aluminum - painted 8 lbs. 9944-1 9944-2

12 lbs. 9945-1 9945-2

15 lbs. 9948-1 9948-2

18 lbs. 9946-1 9946-2

Black PVC - coated 8 lbs. 9944B1 9944B2

12 lbs. 9945B1 9945B2

15 lbs. 9948B1 9948B2

18 lbs. 9946B1 9946B2

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag

For more details visit www.marinemegastore.com or call 0871 8732404 71

GENERAL MARINE ACCESSORIES96

For more details visit www.marinemegastore.com or call 0871 8732404

PENETRATING FLUKE ANCHORS

Penetrating fluke anchors dig into mud, sand, or gravel, and stow flat. Pivoting flukes rotate downward into bottom. Excellent weight-to-holding power ratio, compared

to cast anchors. All Attwood penetrating anchors are manufactured of hot dip galvanized steel for corrosion-resistance and strength. The assembly is arc-welded steel

that maintains consistent fluke-to-shank angles, ensuring quick penetration and a firm hold.

Solid Shank Penetrating Anchors

These anchors have a solid shank for durability and strength.

Specifications A B C D

Part No. 22.25\" 18.38\" 12.20\" 10.0\"

9955-1 28.18\" 21.0\" 14.50\" 11.0\"

9956-1 32.0\" 24.0\" 16.50\" 12.0\"

9957-1

Description Description Bulk Aftermarket

PackagingΔ Packaging*

#8 8 lbs. 9955-1 9955-2

#13 13 lbs. 9956-1 9956-2

#18 18 lbs. 9957-1 9957-2 9956

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag 9960

Slip-Ring Penetrating Anchors 11964

storage

Feature a slip-ring shank for easy retrieval of a snagged anchor. case

Specifications A B C D

Part No. 13.85\" 11.50\" 8.75\" 8.0\"

9960-1 16.35\" 13.25\" 8.88\" 8.88\"

9961-1 19.85\" 14.25\" 9.50\" 10.0\"

9962-1 21.85\" 21.0\" 12.0\" 12.0\"

9963-1

Description Bulk Aftermarket

#5 PackagingΔ Packaging*

#7

#10 9960-1 9960-2

#13

9961-1 9961-2

9962-1 9962-2

9963-1 9963-2

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag

Grapnel Folding Anchors

Ideal four-fluke anchor for personal watercraft (PWC), small craft, and dinghies. Heavily galvanized, malleable iron.

Folds up easily for storage. Lockable in opened or closed position.

Description Bulk Aftermarket

PackagingΔ Packaging*

3 lbs. 11964-1 11964-2

5 lbs. 11966-1 11966-2

7 lbs. 11968-1 11968-2

ΔAll Bulk Packed anchors include ID label with UPC number\/bar code. *Hang Tag

Grapnel Anchor System

3.5 lb anchor will hold your PWC, canoe, dinghy, or float tube in sand, mud, sand, gravel, and rock.

Includes 25 feet of rope, marker bouy, giant snap hook, anchor and a durable nylon storage case

that protects your boat from scratches.

Description Bulk Aftermarket

Grapnel Anchor System PackagingΔ Packaging*

For more—details visit www.marinemeg1a1s9t6o9r-e7.com or call 0871 8732404 1196792

*Clam Shell

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 109

“2-In-1” Rod Holders

“2-In-1” Rod Holders are manufactured to rugged specifications with tough, durable polycarbonate. Each holder includes a

gear-lock mounting base. These patented, “2-In-1” rod holders feature a dual-position locking ring. The ring opens with a

snap so the rod is fingertip-ready when the fish strikes. A single up-and-out motion removes the rod and sets the hook.

Casting Rod and Reel Spinning Rod and Reel

“2-In-1” Adjustable

Features large, easy-grip lock-nut for easy adjustment. 180° vertical

adjustment range for a variety of rod tip height settings. Heavy-duty,

deep-tooth gear-lock mounts securely in base.Use with casting rods

and spinning rods, from ultra-light to heavy action. Rod throat opening

fits large rods up to 15\/8\"-diameter. Locking ring fits all sizes of spinning

reel handle shanks up to 11\/16\"-diameter.

Patented

RH-40 RH-40W

Description Color Bulk Aftermarket RH-42

Side mount Black Packaging Packaging*

White

Flush mount Black — RH-40

— RH-40W

— RH-42

*Individual Carton

“2-In-1” Non-Adjustable

Features fixed vertical angle to optimize rod positioning. Smaller size is perfect for medium and light action gear. Rod throat

opening fits most standard and ultra-light rods up to 13\/16\"-diameter. Locking ring fits spinning reel handle shanks up to

7\/16\"-diameter.

Available in single package or promotional double-pack.

Description Color Bulk Aftermarket

Packaging Packaging*

Side mount Black — RH-46

Black, pair — RH-4646

*Individual Carton

RH-46

For more details visit www.marinemegastore.com or call 0871 8732404 85

GENERAL MARINE ACCESSORIES110

For more details visit www.marinemegastore.com or call 0871 8732404

PRO-SERIES MOUNTING BASES

Convenient, interchangeable mounting bases are a hallmark of the Attwood Pro-Series,

“2-In-1”, and Mini Rigger fishing systems. These new bases come in three styles for

installation on any type of boat. They provide 360º lift-and-turn horizontal adjustment and

fail-safe retention. The locking keyway prevents removal of a rod holder or Mini Rigger

until it is turned directly inboard.

Flush Mount Locking Feature

Mounts flush to gunwale or deck. Easy open cover conceals fasteners and elastomeric liner seals water out.

When closed, low profile, smooth, contoured design avoids snagging lines.

Description Color Bulk Aftermarket 5022 Open

Packaging Packaging* 5023 Closed

Flush mount Black — 5022-7

White — 5023-7

*Clam Shell

Side Mount

Mounts to vertical surface.

Description Color Bulk Aftermarket

Side mount Black Packaging Packaging*

White

— 5020-7 5020

— 5021-7

*Clam Shell

Pedestal Mount 5021

5025

Mounts to gunwale or deck. RM-32

RM-31

Description Color Bulk Aftermarket 5024

Pedestal base Black Packaging Packaging*

White

— 5024-7

— 5025-7

*Clam Shell

Rail Mount

Attaches side mount to round or square rail,

1\"-diameter and smaller. For use with 5020

or 5021 Side Mount. Complete with two

stainless steel U-bolts, nuts, adapters, and

heavy aluminum pre-drilled backing plates.

Description Color Bulk Aftermarket

Round\/square rail mount up to 1\" Black Packaging Packaging*

White

— RM-32-7

— RM-32W-7

*Clam Shell

Square Rail Mount

Attaches side mount to large square rail,

11\/2\" and smaller. For use with 5020 or 5021

Side Mount. Complete with two stainless

steel U-bolts, nuts, and heavy aluminum

pre-drilled backing plate.

Description Bulk Aftermarket

Square rail mount up to 11\/2\" Packaging Packaging*

— RM-31 86

For more details visit www.marinemegastore.com or ca*Cllla0m87S1he8ll732404

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 111

Mini Rigger Kit

A complete package to start downrigger fishing. Ideal for the value conscious fisherman. The Mini Rigger brings

controlled-depth trolling capabilities even to small boats. It is designed to operate with one hand. Features easy grip

handle and a swivel head pulley to respond to line movements. Strong, lightweight reinforced polycarbonate. One full

turn equals one foot of line. Adjustable disc-brake-drag slip-clutch locks in line depth and slips if weight snags. Kit

includes 100' of stainless steel line, 4 pound cannonball weight, snap swivel, a side mount (5020), and line release.

Description Bulk Aftermarket

Mini rigger with harness Packaging Packaging*

— 9703-7

*Clam Shell

For more details visit www.marinemegastore.com or call 0871 8732404 87

GENERAL MARINE ACCESSORIES112

For more details visit www.marinemegastore.com or call 0871 8732404

“Sure Grip” Steel Rod Holders with Stainless Steel Stems and Wing Nuts

Attwood’s line of “Sure Grip” Steel Rod Holders are the perfect complement to our molded Pro-Series and “2-In-1” rod

holders. They are designed for drift fishing, pan fishing, crappie, and more. Make Attwood your single source for all types

of rod holders!

“Sure Grip” Steel Rod Holders

The 3\/8\" diameter coated steel rod is tough, strong, and corrosion-resistant. U.V. resistant plastic coating protects the rod butt

and handle. And the exposed stem and wing nut are stainless steel for years of corrosion-resistant use.

Description Bulk Aftermarket

Packaging Packaging*

5° Angle, 4\" S.S. Stem & Wing Nut, — 5060-3 5060

For horizontal rod position, 5061

includes 5071 mounting base 5062

5° Angle, 8\" S.S. Stem & Wing Nut, — 5061-3

For horizontal rod position with added clearance,

includes 5071 mounting base

25° Angle, 4\" S.S. Stem & Wing Nut, Includes 5071 mounting base — 5062-3

For drifting or trolling.

Includes a pair of rod holders — 5066-7

and 5071 mounting bases

45° Angle, 4\" S.S. Stem & Wing Nut, — 5063-3

For trolling, includes 5071 mounting base

10° Angle, 4\" S.S. Stem & Wing Nut, Includes 5071 mounting base — 5064-3

For long handle bait casting rods.

10° Angle, 4\" S.S. Stem & Wing Nut, — 5065-3

For bait casting rods, includes 5071 mounting base * -3 = Wire Tie; -7 = Clam Shell

5070

5063 5064 5065

“Sure Grip” Mounting Bases

Attwood “Sure Grip” mounting bases fit a variety of mounting surfaces including rails. Constructed of extruded aluminum. 5071

5072

Description Bulk Aftermarket 5074

Packaging Packaging*

Side mount base, fits gunwale or rail — 5070-3

Flush base, fits 2\" flat surfaces — 5071-3

Flat rail base, fits square rail — 5072-7

V-Round rail base, fits round rail up to 1\"-dia. — 5073-3

Clamp-On rail base, fits round rail up to 7\/8\"-dia. — 5074-3

* -3 = Skin Pack; -7 = Clam Shell

For more details visit www.marinemegastore.com or call 0871 8732404 88

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 113

Stainless Steel Flush Mount Rod Holders

Attwood stainless steel rod holders answer the need for the finest in finish, function and durability The holders are available in

30º, 15º, and 0º configurations in standard 2\" diameter or in the robust 21\/4\" diameter Big Game Series. All stainless steel rod

holders have these outstanding features, including optional custom-casting or electrolytic etching of your logo in the flange.

Contact your Attwood representative for details.

Closed End

66470

66471

End Flange Tube Bulk Aftermarket Closed End Base

Packaging* Polished end has

Description Diameter Type Shape Length Packaging drainage opening

for 14-18 NPT fitting

CLOSED END 2\" DIAMETER ROD HOLDERS

Open End

30° Stainless flush mount holder 2\" Closed Round 9\" 66470-1 —

Cap-gasket for 30° holder 1472-1 — 66363

0° Stainless flush mount holder — 66463

Cap gasket for 0° holder 2\" Closed Round 9\" 66471-1 —

1471-1 66364

66464

STANDARD SERIES 2\" DIAMETER ROD HOLDERS Drainage

Receptacle

30° Stainless flush mount holder 2\" Open Oval 71\/2\" 66362-1 66362-7Δ (Standard Series

Cap-gasket for 30° holder — 2\" diameter only)

15° Stainless flush mount holder 1478-1

Cap-gasket for 15° holder 66363-7Δ

0° Stainless flush mount holder 2\" Open Oval 71\/2\" 66363-1 —

Cap-gasket for 0° holder

Drainage receptacle for 2\" models 1477-1 66364-7Δ

—

2\" Open Oval 71\/2\" 66364-1 —

1476-1

1479-1

BIG GAME SERIES 21\/4\" DIAMETER ROD HOLDERS 66362

66462

30° Stainless flush mount holder 21\/4\" Open Oval 11\" 66462-1 —

Cap-gasket for 30° holder 1481-1 —

15° Stainless flush mount holder 21\/4\" Open Oval 11\" 66463-1 —

Cap-gasket for 15° holder 1482-1 —

0° Stainless flush mount holder 21\/4\" Open Oval 11\" 66464-1 —

Cap-gasket for 0° holder 1483-1 —

Stainless backing plate for 21\/4\" rod holders 66465-1 —

Δ= Includes Cap-Gasket *Clam Shell

For more details visit www.marinemegastore.com or call 0871 8732404 6646589

GENERAL MARINE ACCESSORIES114

For more details visit www.marinemegastore.com or call 0871 8732404

Hybrid Rod Holder

10\" long ABS plastic tube with stainless cap. Stainless look at a fraction of the price!

Description Bulk Aftermarket

ABS plastic with stainless steel cap, 30° angle Packaging Packaging*

ABS plastic with stainless steel cap, 0° angle 6450-4

— 6451-4

— *Individual Carton

6450 6451

Clamp-On Rod Holders—Stainless Steel

304 Stainless steel with black plastic liner. Can be used on vertical or horizontal rails. Adjustable for rails 7\/8\" to 1\" in diameter.

9\" Length, 13\/4\" inside diameter tube.

Description Bulk Aftermarket

Packaging Packaging*

Stainless Steel — 66970-7

*Clam Shell

66970

Rod Holders—Plastic

Durable plastic construction. No liner needed. Holder is angled at 30º for proper rod tip tension. Installation hole size:

21\/2\"-diameter. Flange has three holes for 1\/4\" screws. Accommodates standard rod grip sizes under 11\/2\"-diameter.

Description Color Bulk Aftermarket

ABS plastic White Packaging Packaging*

Black

ABS plastic, 8 piece Display White 12700-1 12700-5

12701-1 12701-5

— 12703D1**

*Poly Bag ** PDQ Display

12703D1

Rod Holders—PVC

Durable white PVC tube side mounts with polished, pre-drilled aluminum utility straps. 9\" long, holds 13\/4\"-diameter or

smaller grips.

Description Bulk Aftermarket 12708

PVC with aluminum strap Packaging Packaging*

PVC with aluminum strap, 8 pc. Display

— 12708-5

— 12708D1**

*Poly Bag ** PDQ Display

For more details visit www.marinemegastore.com or call 0871 8732404 90

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 115

Rod Rack with Knife and Plier Holder

UV-Stabilized off-white high density plastic. Easily cleaned with soap and water.

Description Bulk Aftermarket

Rod Rack Packaging Packaging*

— 11855-4

*Individual Carton 11855

12760

Boat Deck Rod Holder Set

12761

Mounts rods and reel combos to the deck of the boat. 12750

Prevents rods and reels from bouncing out of the boat while traveling.

• Holds up to 5 rods.

• Set includes: one 10\" (25 cm) strap for the handle end of the rods, one

6\" (15 cm) strap for the tips and stainless steel mounting hardware

Description Bulk Aftermarket

Rod Holder Set Packaging Packaging*

— 12760-7

*Clam Shell

Vertical Mount Rod Holder

• Holds 4 to 6 rods

• Mounts vertically in application to hold rods horizontally

• Molded rubber inserts secure rod butt and tip

• Holds rod and reels in a crisscross manner, which allows storage

of more rods in a smaller space

• Resists UV rays

Description Bulk Aftermarket

Vertical Mount Packaging Packaging*

— 12761-7

*Clam Shell

Rod Storage Holder

Holds up to 3 fishing rods. Closed-cell foam insert protects rod. Mounts vertically or horizontally. 83\/4\" L x 21\/2\" W.

Description Bulk Aftermarket

Packaging Packaging*

Black ABS frame, black foam — 12750-6

*Blister Pack, Pair

For more details visit www.marinemegastore.com or call 0871 8732404 91

GENERAL MARINE ACCESSORIES116

For more details visit www.marinemegastore.com or call 0871 8732404

Graph Mount Bulk Aftermarket 16002

Packaging Packaging* Does not include

• 12\" arm

• Rotates allowing easy visibility from all directions — 16002 depthfinder

• Mount removes quickly and easily *Individual Carton

• Durable, aluminum construction 5000

• Black powder coated

• Depthfinder shown is not included 5650

Description

Graph Mount

Trol-Lock™ Motor Mount

Unique, Trol-Lock products let you remove trolling motors in seconds

• Pre-drilled for MotorGuide trolling motors

• 51\/2\" x 201\/2\" black powder coated base with 51\/2\" diameter mounting plates.

• Perfect for fish-and-ski and pontoon boats

• Choice based on torque application

(Lbs. of thrust x shaft length = torque lb. – inches.)

Pre-Drilled Max. Torque Bulk Aftermarket

2,604 – lb.-in. Packaging Packaging*

For MotorGuide trolling motors with 07 and 16 mounts. 5000

Also retro fits 01and 15 mounts. —

Comes with glass filled plastic mounting pads and step pad covers. 5650

6,540 – lb.-in. —

For MotorGuide trolling motors with 20.5 and 21 mounts.

Also retro fits 20 and 25 mounts. Comes with aluminum mounting pads.

REPLACEMENT PARTS FOR 5000

Pad for Trol-Lock (non-locking) — SP-501**

Pad for Trol-Lock (locking) — SP-504**

Step cover — SP-503**

*Individual Carton, **Replacement Parts - Poly Bag

MARINE CLEANERS

Spider Away

• Makes spiders leave a treated area immediately

• Non-toxic - not a poison or pesticide; won't harm insects

• Perfect for use in boathouses, garages, sheds or other enclosed areas

Description Aftermarket

Packaging*

22 oz spray bottle 30120-1

*Must be ordered in standard pack quantities (6)

No Damp Moisture Absorber Dehumidifier 30120

30119

• Removes moisture (humidity) from the air that causes mildew stains, musty odors, rust and warping.

• Absorbs more moisture per ounce than flake formulas

• Pellets in basket within a cup for maximum efficiency and performance

• Use no damp year-round almost anywhere moisture or odors are a problem

Description Aftermarket

Packaging*

12 oz. 30119-1

*Must be ordered in standard pack quantities (6)

For more details visit www.marinemegastore.com or call 0871 8732404 92

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 117

MARINE CLEANERS

Premium Marine Polish

• The ultimate protection for fiberglass, metal & painted surfaces

• Last up to 6 times longer than other marine polishes

• UV inhibitors help stop fading and oxidation

• Leaves a super smooth, non-stick coating which reduces drag and repels dirt, grime, oil and stains

• Race tested; increases hull speed

• For medium to heavy oxidation use Premium Cleaner Wax

Description Aftermarket

Packaging*

16 oz. pour bottle 30108-1

*Must be ordered in standard pack quantities (6) 30108

Premium Cleaner Wax

• Cleans, shines and protects in one step

• UV inhibitors help stop fading and oxidation

• Removes oxidation and chalk while leaving a durable coat of protection

• Specially formulated for fiberglass, metal & painted surfaces

Description Aftermarket

Packaging*

16 oz. pour bottle 30100-1

*Must be ordered in standard pack quantities (6) 30100

30115

Vinyl Cleaner & Polish 30105

• Cleans and restores all vinyl surfaces

• Provides UV protection

• Long lasting shine

• Removes stains and yellowing and prevents drying out and cracking

• Restores original color and protects from fading

Description Aftermarket

Packaging*

16 oz. pour bottle 30115-1

*Must be ordered in standard pack quantities (6)

Fiberglass Color Restore

• Brings back original color & luster

• Removes heavy oxidation, chalking and fading

• Will not harm or scratch gelcoat

• Excellent for all dark or brilliant colored boats

• Seals surface to protect against future fading due to weathering

Description Aftermarket

Packaging*

16 oz. pour bottle 30105-1

*Must be ordered in standard pack quantities (6)

Aluminum Cleaner Aftermarket

Packaging*

• Specifically formulated to clean aluminum surfaces

• Easy to use, removes even tough waterline stains fast 30118-1

Description

32 oz. pour bottle

*Must be ordered in standard pack quantities (6)

For more details visit www.marinemegastore.com or call 0871 8732404 93 30118

GENERAL MARINE ACCESSORIES118

For more details visit www.marinemegastore.com or call 0871 8732404

Instant Hull Cleaner Aftermarket

Packaging*

• Environmentally friendly, biodegradable formula

• No rubbing required 30101-1

• Does not contain harmful acids, safe and easy to use

• Removes stains from the water line

• Excellent for use on fiberglass, metal & painted surfaces

Description

32 oz. pour bottle

*Must be ordered in standard pack quantities (6) 30101

30109

Non-Skid Deck Cleaner Aftermarket 30103

Packaging* 30113

• Environmentally friendly, biodegradable formula

• Cleans away ground-in dirt and stains 30109-1

• Safe to use, contains no harsh chemicals

• Leaves a protective coating to repel dirt and stains

• No scrubbing or rubbing

• Will not remove wax or polish

Description

32 oz. pour bottle

*Must be ordered in standard pack quantities (6)

3X Concentrated Boat Wash

• Environmentally friendly, biodegradable formula

• Low sudsing formula saves water

• Powerful – 3 capfuls clean a 24 ft. boat

• Special cleaning agents remove dirt, stains and exhaust smudges

Description Aftermarket

Packaging*

32 oz. pour bottle 30103-1

*Must be ordered in standard pack quantities (6)

Boat Wash & Wax Aftermarket

Packaging*

• Environmentally friendly, biodegradable formula

• Washes, shines and protects in one easy step 30113-1

• Citrus formula whisks away dirt, grease and oil

• Leaves a long lasting polymer shine

• Concentrated for economical use

Description

32 oz. pour bottle

*Must be ordered in standard pack quantities (6)

Citrus Cleaner\/Degreaser Aftermarket

Packaging*

• Environmentally friendly, biodegradable formula

• Spray on to remove dirt, fish blood, grime and stains 30104-1

• Powerful citrus cleaning agents strip away greasy smudges

• Won't remove wax or polish

Description

22 oz. spray bottle

*Must be ordered in standard pack quantities (6)

For more details visit www.marinemegastore.com or call 0871 8732404 94 30104

GENERAL MARINE ACCESSORIESFor more details visit www.marinemegastore.com or call 0871 8732404 119

Black Streak Remover

• Environmentally friendly, biodegradable formula

• Instantly removes black streaks caused by water run off

• Safe for use on fiberglass, metal and painted surfaces

• Can be used for many other tough cleaning jobs – bathrooms, tubs, showers, etc.

• Will not remove wax or polish

Description Aftermarket

Packaging*

22 oz. spray bottle 30112-1

*Must be ordered in standard pack quantities (6)

Mildew Stain Remover 30112

30102

• Environmentally friendly, biodegradable formula

• Removes mildew stains on contact and provides amazing results in minutes 30117

• Simple spray on application

• Use on headliners, vinyl covers, cushions, etc.

• Safe for all surfaces and does not weaken fabric or thread

Description Aftermarket

22 oz. spray bottle Packaging*

30102-1

*Must be ordered in standard pack quantities (6)

Waterproofing Aftermarket

Packaging*

• Safe for all fabrics including Sunbrella®

• For bimini tops, boat covers, sail covers, clothing and tents 30117-1

• Does not change the color or feel of fabric

Description

22 oz. spray bottle

*Must be ordered in standard pack quantities (6)

Rust Stain Remover Aftermarket

Packaging*

• Easy to use spray on formula

• No rubbing or scrubbing required 30116-1

• Safe for fiberglass, metal, and painted surfaces

• Removes rust drip stains and rust sprinkler deposits

Description

22 oz. spray bottle

*Must be ordered in standard pack quantities (6)

Premium Golden Teak Oil Aftermarket 30116

Packaging* 30114

• Extra long lasting protection for teak

• Gives teak a natural warm golden color 30114-1

• Contains ultraviolet inhibitors to resist weathering

• Lasts 4 to 6 times longer than standard teak oils

• Advanced tung oil polymer formula

• #1 rated teak oil in independent testing

Description

16 oz. pour bottle

*Must be ordered in standard pack quantities (6)

For more details visit www.marinemegastore.com or call 0871 8732404 95