GAS STOVE

MODEL NO.: FC GLAZZO G2713

Gas Stove

INSTRUCTION MANUAL

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THIS PRODUCT

Special caution:If the cookeris built with advanced flame out protection device, please adjust

the air plate until the flame, lift eliminated,the thermo couple beside the brass lid well heated

and electric current produced, so that the solenoid valve can work properly. Ensure a continuous

combustionformed before releasing your handfrom the knob.

Caution for safety

Make suregas used is identical to the type asspecifiedon the brand plate. Other type is prohibited

to be used.

Prior to installation,ensurethat the local distribution conditions (nature of the gasand gaspressure)

and the adjustment of the applianceare compatible.

Theadjustment conditions for this applianceare stated on the label (or data plate).

This appliance is not connected to a combustion products evacuation device. It shall be installed

and connected in accordance with current installation regulations. Particular attention shall be

given to the relevantrequirementsregarding ventilation.

The gas cooker is designed for cooking and water boiling purpose.To avoid accident,do not allow

for towel or clothes to be dried on the gas cooker.

Keepthe kitchen well ventilated and don

’t put the gas cooker under strong blowing.

Avoid rubber gas tube from touching the surfaceof the gas cooker.

Thetype of gas tube should be oil, proof, heat and corrosion resistant,suchasNBR.

Replacethe aged gas tub timely to prevent from accident causedby gas leakage.

Ensurethe gas cooker is looked after when in use,turn it off when going out or going to bed.

When gas leakagefound. Immediately turn off the gas supply and open the doors and windows to

ventilate the room, Don

’t turn on or turn off any electric switches before the gas completely

dispersedout of the room.

Keep hands off while gas cooker is in use or at the moment of unexpected flame out, since the

burner, lid and pan support are still hot.

In casecooking stuff overflow over burner, lid or water collector, cleanthem in time so that the gas

cooker can work properly.

Take special care: when artificial gas applied, clean the lids, flame holes, switch nozzles and gas

passageregularly(usuallyonce a month) to remove the sediment of carbon and contamination,

which will make asway through and combustion steady.

Qualified gas regulator must be used.

Features and characteristic

Japan made thickened stainless steel panel.

Teflon coated steel panel with shiny, corrosion resistant and anti-abrading surface.

With fashioned profile design, luxury, elegant and decent.

Big diamenter burner and lengthened gas passage,together makes sufficient gas mixing and

efficient combustion.

Burner designed with leading domestic technologyand special processing for fine gas combustibility

and anti-rusting.

Gas Stove

Gas Stove

Trade mark:

Mode l:

Year of manufacture :

Gas Category :

Gas type :

Gas pressure :

Serial No:

:

Manufacturer :

Destination countries :

FABER

FC GLAZZO G2713

2023

But ane (G30), propane (G31) or their mixtures

28-30 mbar

NIL

Heat Input Total: 7.2kW =3.6kW +3.6kW

China

Malaysia (MY)

This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated

space. Read the instructions before installing or using this appliance.

I3B/P(30)

Made in China

Advanced design and process introduced in producing the lid and as a result,it enables sufficient

combustion,strong flame,but at the same time reducing hazardous gas (carbon monoxide,nitrogen

oxide,etc.)

Ignition with piezoelectric ceramic, ensures its durable application.

Some gas cooker with flame out protection device,which guarantees the safety in use.

Platformdesign, more convenient to use.

Profile, structure and parts description.

Technical parameter Gas Stove

The gas cooker should be put horizontally on the platform.

Procedures:

1. Take out thegas cooker from its package and check if any accessories missing.

2. Put the accessories such as pan support on the gas cooker.

3. Turnthe gas inlet (at the rear side of the gas cooker)to a proper angle, connect to thegas tube

and fasten with tube clamp(tube and clamp to be prepared by user).

4. Turn on the gas regulator and check the connection with detergent foam.

Requirement:

1. Surface of the installation platform must be made of concrete stuff or other flame retardant materials.

2. Ample space of at least 150mm must be left between the wall and the body of the gas cooker.

and a minimum 800mm clearance above the gas cooker.

3. Gas tube should be 1~1.5 meter in length and should not touch the cooker body.

4. The gas cooler should be located no less than 1 meter away from gas tank.

Ignition

Turn on thegas supply,push down and turn the switch knob counter clockwise till a sound of click heard.

The electro spark will then ignite the gas from the ignition device. Meanwhile the burner lit.Then release

the switch knob.

In event of the burner flames being accidentally extinguished, turn off the burner control and do not

attempt to re-ignite the burner for at least 1min.

Flame adjustment

Turn the switch knob to the position according to the fig illustrated below for the desired flame size.

Airadjustment

To obtain optimum combustion, gas should be mixed with proper proportion of air. Air plate for air

incoming control is at the air inlet of burner.When flame shows an abnormal combustion, turn the

air plate to adjust the amount of air letting in until the flame color becomes blue.(see fig below)

Warning

The size of vessel for these appliance is from 180mm to 240mm.Do not use the cooking vessels

in the hotplate that overlap its edges.

Installation method and requirement

Usage Gas Stove

Dibuat untuk dan diedarkan oleh:

FIMACO SDN. BHD.

8-2, Wisma Fiamma,

No.20, Jalan 7A/62A,

Bandar Manjalara,

52200 Kuala Lumpur, Malaysia

CUSTOMER CARE CENTRE: 0362798888

Prolonged intensive use of the appliance may call for additional ventilation,for example opening

of the window,or more effective ventilation, for example increasing the level of mechanical ventilation

where present.

Caution: this appliance is for cooking purposes only. It must not be used for other purposes, for

example room heating.

Caution: in case of hotplate glass breakage:

Shut immediately off all burners and any electrical heating element and isolate the appliance from

the power supply.

Do not touch the appliance surface.

Do not use the appliance.

Caution: the use of a gas cooking appliance result in the production of heat,moisture and products

of combustion.

Keep natural ventilation holes open or install a mechanical ventilation device(mechanical extractor

hood)

Do not use the appliance for

igniting the charcoal.

Do not hang up the clothes or towels

for drying with the appliance.

Do not use the appliance as

a barbecue.

If there are any leakage, turn o ffthe

appliance and the gas supply.

Gas Stove