该页无缩略图
Speed Dome Camera
User Manual
1.IE Browser Login
Default IP parameters: IP add: 192.168.1.188 Subnet mask:255.255.255.0 Gateway:192.168.1.1
Step 1: User needs to check whether the IP address of the computer is the same as the camera in 192.168.1.\*\*. If yes, user can log in directly. If it is not the same network segment, user can use upgrade tool to modify the IP address of the camera and set it to be in the same network segment as the computer, as shown below
Step 2: Enter IP address of the camera in lE browser. Before you log in for the first time, you need to install the plug-in. If the installation fails, user can enter IE settings to allow ActiveX plug-ins to run, close the browser and download webmedia plugin. Exe and reinstall it, then enter the login interface, input user name and password, user name: admin (default), password: 123456 (default), select "language", and then click login to preview the real-time image.
2. Preview
Manually control horizontal and vertical rotation of P/T Manually control the camera zoom Manually control the camera focus Manually control the camera zoom aperture
Manually control the horizontal / vertical speed setting: the more the button is adjusted to the right, the faster the rotation speed is
Adjust the brightness and contrast of image
Add preset/call preset/delete preset
Alarm/screenshot/full screen/local recording
3.Configuration and Function
User can set the detailed parameters of the camera on the settings page,
User can modify the IP address and service port number of the camera, enable and disable all Netcom
Motion Detection
(Disable by default)
User can set sensitivity, detection area, starting time, linkage action, linkage sound...etc.
Human Detection
(Enable by default)
User can set the startup time, linkage action, linkage sound and detection area (the detection area is the full screen by default)
Human pixels: the range is 30-300, camera will detect human pixels greater than or equal to human pixels (red area)
Set detection area: click the area to draw a line on the channel picture by using mouse, press and hold the left mouse button to move in any direction, it will form a red area, and the size of the area is determined by the user. If it is not appropriate, the user can erase it and then reset it
3. IMS lite
IMS lite-the software can monitor and manage multiple IP cameras at the same time
IMS lite Login:
Users can manually change languages. The initial user name is admin and the initial password is 123456
Search and add devices in this interface
Preview
user can see the real-time image of the added device in this interface
5. Mobile Monitor: (MEEYE remote connection)
Note: before using MEEYE app for remote connection, please ensure that the device is connected to the network and it is "online"
Step 1. Scan the QR code on the left, download MEEYE app, register the account and log in Step 2. Add a device in the app, there is scan function on the upper left corner of APP, scan the QR code on the right as shown in the following figure, and obtain the remote access serial number of the device
6. Quick Operation Command List
| Function | Control Method | Note |
| First cruise(No.1- No.16 preset) | Call No.41 preset | |
| Second cruise(No.17- No.32 preset) | Call No.42 preset | |
| Third cruise(No.65-No.80 preset) | Call No.43 preset | |
| Fourth cruise(No.113- No.128 preset) | Call No.44 preset | |
| Fifth cruise(No.129-144 preset) | Call No.45 preset | |
| Sixth cruise(No.145-160 preset) | Call No.46 preset | |
| Seventh cruise(No.161-176 preset) | Call No.47 preset | |
| Eighth cruise(No.177-192preset) | Call No.48 preset | |
| The cruise preset stays for 4 seconds | Call No.51 preset | |
| The cruise preset stays for 6 seconds | Call No.52 preset | |
| The cruise preset stays for 8 seconds | Call No.53 preset | Default |
| The cruise preset stays for 10 seconds | Call No.54 preset | |
| The cruise preset stays for 12 seconds | Call No.55 preset | |
| Track mode: guard position preset | Call No.92 preset | |
| Track mode: enable guard positiontrack | Call No.92 preset | |
| Track mode: enable cruise track | Call No.93 preset | |
| Track mode: Disable track function | Call No.94 preset | Default OFF |
| Enable 369 degree scan | Call No.96-100 preset | |
| Enable right/left limited position scan | Call No.38 preset | |
| CIEAR right/left limited position scan | Set No.38 preset | |
| Set left limited position | Set No.35 preset | |
| Set right limited position | Set No.36 preset | |
| Set limited position scan speed | Set No.60-64 preset,speed 5 levels adjustable | |
| Proportion zoomturn | Call No.106 preset to turn on, set No.106 preset tooff | ON |
| Idle action switchturn | Call No.105 preset to turn on, set No.105 preset tooff | OFF |
| Idel action | Call No.101 preset: Guard position(No.1 preset)Call No.102 preset: 360 degree scanCall No.103 preset: two points scanCall No.104 preset: first cruise | Default 90S |
| Initialization(restore) | Set No.40 preset/Call No.115 preset | |
| Clear all presets | Call No.33 preset | 1-8 Cruises |
| Return sensor position(Zero) | Call No.34 preset | |
| IR light-Auto | Call No.81 preset | |
| IR light -ON | Call No.82 preset | |
| IR light -OFF | Call No.83 preset | |
| IR light enable sensitivity: low | Set No.81 preset | |
| IR light enable sensitivity: middle | Set No.82 preset | |
| IR light enable sensitivity: high | Set No.83 preset | |
| IR mode; far/near light switch | Call No.84 preset | |
| IR mode:far lights ON | Call No.85 preset | |
| IR mode: all lights ON | Call No.86 preset | |
| Set photosensitive start time | Set No.110 preset+No. N preset(N's value 36-100) | |
| Set speed for two points scan and 360scan | Set No. 111 preset+No. N preset(N's value1-64) | |
| Set PTZ control max speed | Set No. 113 preset+No. N preset(N's value 1-64) | |
| Set cruise dwell time | Set No. 114 preset+No. N preset(N's value 1-254) | |
| Set cruise speed | Set No. 115 preset+No. N preset(N's Value 1-64) | |
| Set idle action time | Set No. 117 preset+No. N preset(N's value 1-254) | Default 90S |
| Set zoom times for far light/near lightswitch according to zoom times | Call No.110 preset firstly, Call No. 123 presetsecondly |
