SUPCON

INSTRUMENT

Comprehensive Product Brochure

Company Profile

Sales Network

Honor

I

Company Introduction

Pressure Transmitter

Temperature Meter

Flowmeter

Valve Positioner

Gas Detector

Level Gauge

ⅡField Measuring Instrument

07

16

17

21

22

25

01

03

05

Barrier/Isolator/SPD

Intelligent Secondary Instrument

ⅢSignal & Data Acquisition (DAQ)

Interactive Smart Calibrator

HART Handheld Communicator

Calibrator

ⅣPortable and Handheld Test Instruments

Solution for Automated Loading and Unloading Control Industry

SUPCON IIOT Solution

Ⅴ

Solution

43

45

46

47

53

29

37

DCS SUPPLIER IN CHINA

NO.1

* Data from ARC

19.2 %

4,300

11,000

30,000

/ MARKET SHARE

/ EMPLOYEES

/ GLOBAL CUSTOMERS

/ INSTALLED BASES

01

02

Zhejiang SUPCON Instrument Co., Ltd. (hereinafter referred to as \"SUPCON Instrument\") is a holding subsidiary of Zhejiang SUPCON

Technology Co., Ltd. and a high-tech enterprise in Zhejiang Province. SUPCON Instrument is an excellent R&D and production enterprise of

industrial instruments in China.

Since its establishment, SUPCON Instrument has continuously enriched its product line, and established two major product systems: field

instruments and intelligent instruments. Its products include pressure instrument, temperature instrument, flowmeter, level instrument, gas

detection instrument, valve positioner, recording instrument, control instrument, signal instrument, tool instrument, intelligent gateway, etc.

The products have been granted by the international authorities the SIL, classification society, CE and ATEX certifications. The SUPCON

pressure transmitter and safety barrier have been successfully shortlisted in the procurement framework of PetroChina and Sinopec. In

addition to providing high-quality instrument products, depending on its more than 20 years of deep understanding and experience of

automation in process industry, the Company also provides users with \"one-stop automatic

loading and unloading\", \"smart energy monitoring management\", \"wireless data acquisition and edge computing\" and a series of excellent

automation solutions.

SUPCON pressure transmitters and safety barrier products have successfully entered the procurement framework of PetroChina and

Sinopec. In addition to providing high-quality instrument products, the company has more than 20 years of deep understanding and

experience accumulation in process industry automation, and can provide users with \" A series of outstanding automated overall solutions

such as \"One-card automated loading and unloading trucks\", \"Smart Energy Monitoring and Management\", \"Wireless Data Collection and

Edge Computing\".

About Us

Zhejiang Supcon Technology Co., Ltd. (abbreviated as \"Supcon Technology\" or \"Company\", 688777.SH) was established in 1999 and

is a high-tech enterprise and a national technological innovation demonstration enterprise. Always adhering to the mission of \"making

work and life easier\", we are committed to providing intelligent manufacturing products and solutions with automation control systems

as the core, covering industrial software, instrumentation, and operation and maintenance services for industrial enterprises dominated

by process industries. Empower users to improve the level of automation, digitization, and intelligence, and realize industrial production

automation, digitization, and intelligent management.

About the Group

COMPANY 01 PROFILE

03

Sales 02 network

SUPCON is using its profound knowledge of local support and

service to deliver highly qualified technical resources to its global

customers. We have set up subsidiaries in Hong Kong and India,

and overseas offices in South Asia, Southeast Asia and the Middle

East to offer fast and reliable service for customers in local and

surrounding areas. We work hard with customers to maintain and

evolve existing installations, thereby maximizing customer value

and ensuring safe plant operation.

G lobal Strategic Partners

04

honor 03 certificate

05

06

07

CXT series high-precision smart pressure transmitter is provided with high-performance monocrystalline silicon composite sensor chip,

with unique sensor packaging technology, to ensure the product excellent performance and long-term stability. Various corrosion-resistant

isolation diaphragms can be provided to meet the demands of users in different sectors. Through special process structure design, it is

capable of reliably operating and running under severe operating conditions such as high temperature and high vacuum. CXT series of

high-precision smart pressure transmitters are widely applied in measuring pressure, flow and liquid level in petroleum, electric power,

chemical, metallurgical, pharmaceutical, light industry and other sectors, and are compatible with HART and FF protocols.

Overview

Features

Maximum accuracy ± 0.035%

Monocrystalline silicon composite pressure sensor

Range: 100Pa ~ 40MPa

Long-term stability up to ± 0.1% /10 years

Range ratio up to 100:1, up to 10 times compression accuracy

lossless

Optional HART, FF protocol, Zigbee/GPRS wireless

communication

Process interface, remote transmission device, flange

specification, filling liquid and diaphragm type can be customized

Degree of protection: IEC IP67

Gold-plated to effectively inhibit hydrogen permeation

Integrated overload diaphragm protection design

Applicable to high temperature and high vacuum operating

condition

Customization: exclusive customization according to process

difficulties to meet customer requirements

National electrical explosion-proof and dust-proof certification

(intrinsically safe/flameproof/intrinsically safe + flameproof)

Petroleum Electricity Chemical Metallurgy Pharmaceuticals Light Industry

CXT Series Smart 04 Pressure Transmitter

08

09

Range: 40kPa ~ 40MPa

Maximum accuracy ± 0.1%

Optional diaphragm materials: 316L,

HaC, gold-plated, tantalum, etc.

SKQ/SKR Flanged Pressure Transmitter

Range: 1kPa ~ 3MPa

Maximum accuracy ± 0.05%

Maximum static pressure 42MPa

Optional diaphragm materials: 316L,

HaC, gold-plated, tantalum, etc.

SKC Differential Pressure (Flow) Transmitter

10

Range: 40kPa ~ 40MPa

Maximum accuracy ± 0.05%

Optional diaphragm materials: 316L, HaC, gold-plated, tantalum,

etc.

SKG/SKA Pressure Transmitter

Range: 40kPa ~ 40MPa

Maximum accuracy ± 0.05%

Optional diaphragm materials: 316L, HaC, gold-plated, tantalum,

etc.

SKP/SKH In-Line Pressure/Absolute Pressure

Transmitter

11

SKD/SKX Double Flange Remote Differential Pressure (Flow) Transmitter

Range: 40kPa ~ 40MPa

Maximum accuracy ± 0.05%

Range: 6kPa ~ 3MPa

Maximum accuracy ± 0.1%

Optional diaphragm materials: 316L, HaC, tantalum, titanium, nickel, Monel, gold-plated, etc.

Multiple filling fluids available

Optional diaphragm materials: 316L, HaC, tantalum, titanium, nickel, monel, gold-plated, etc.

Multiple filling fluids available

SKB/SKW Single Flange Remote Pressure Transmitter

12

Range: 6kPa ~ 3MPa

Maximum Accuracy ± 0.1%

Optional diaphragm materials: 316L, HaC, tantalum, titanium,

nickel, Monel, gold-plated, etc.

Multiple filling fluids available

SKE/SKY Level Transmitter

Special Customization

450mm insertion barrel Sprained PFA for Structural All

Titanium Insert Bushed

Special Small Flanges Zigbee/GPRS Transmission

Gold-plated Diaphragm Small-bore Insertion Cylinder Pressure Transmitter for Hightemperature Vacuum

13

CJT series smart pressure transmitter is a smart pressure (differential pressure) instrument with HART communication function,

developed using the micro displacement capacitive sensor technology. The microprocessor serves as the core of the electronic circuit,

and digital compensation technology is applied for compensation to ensure the accuracy of the whole product up to 0.1 level. Through

the hand-held communicator or other HART protocol, the product can be deployed in the control room, transmitter field, for query,

configuration or adjustment, easy to use.

CJT series smart transmitter is applicable to the pressure, flow and liquid level measurement in petroleum, electric power, chemical

industry, metallurgy, pharmacy, light industry and other sectors.

Overview

Features

Modularized design

Accuracy: ± 0.1%

Range ratio: 40: 1

Degree of protection: IEC IP67

Stability: ± 0.1% FS/year

Flameproof: Ex d IIC T4 ~ T6 Gb

Intrinsically safe: Ex ia IIC T4 ~ T6 Ga

Compatible with HART protocol

Built-in parameter debugging menu

Strong resistance to unidirectional

overload

Self-diagnostic

Fully digital signal conditioning

technology

Applicable in various corrosive media

CJT Series Smart 05 Pressure Transmitter

14

External adjustment of zero position, full, if LCD meter is available,

it can be configured locally

Explosion-proof: intrinsically safe and explosion-proof

Transmitter function configurable: linear, square root, free

programming

Communication protocol: HART

General Specifications

Double Flange Remote Transmitter

Accuracy: ± 0.2%

Range ratio: 40: 1

Measured medium: gas, steam and liquid

Static pressure: does not exceed the

maximum operating pressure of the flange

Plug-in Flange Level Transmitter

Accuracy: ± 0.2%

Range ratio: 40: 1

Measured medium: gas, steam and liquid

Static pressure: does not exceed the

maximum operating pressure of the flange

Plug-in Flange Level Transmitter

Accuracy: ± 0.2%

Range ratio: 40: 1

Measured medium: gas, steam and liquid

Static pressure: does not exceed the

maximum operating pressure of the flange

Differential Pressure/Pressure/Absolute Pressure Transmitter

Accuracy: ± 0.1%

Range ratio: 40: 1

Measured medium: gas, steam and liquid

Overvoltage limit: maximum 60Mpa

15

Technical Parameters

Nominal Diameter Φ40 Φ50 Φ60 Φ75 Φ100 Φ150

Joint Thread M10×1 M14×1.5 M20×1.5

Accuracy Class 2.5 1.6

Installation Type

(MPa)

Vacuum:(-0.1~0)

Pressure vacuum: (-0.1~0.06); (-0.1~0.15); (-0.1~0.3); (-0.1~0.5); (-0.1~0.9);

(-0.1~1.5); (-0.1~2.4)

Pressure: (0~0.1); (0~0.16); (0~0.25); (0~0.4); (0~0.6); (0~1); (0~1.6); (0~2.5);

(0~4); (0~6); (0~10); (0~16); (0~25); (0~40); (0~60)

Nominal diameters of φ60 and φ100 include (0~100)MPa; Φ150 include (0~100)MPa, (0~160)MPa

Environmental

Conditions for Use Temperature: (-5~55)℃ ; (-25~55)℃

Installation Type Radial edge-free; Radial back edge (T); Axial front-edge (ZQ); Axial edge-free (Z)

Other Types Optional diaphragm, shock-resistant, stainless steel, electrical contact, magnetic contact, explosionproof induction, etc.

SP10 Series 06 Pressure Gauge

16

Product Introduction

Thermal resistance (RTD) is divided into three categories: platinum thermal resistance, copper and nickel thermal resistance, which

temperature measurement is based on that the resistance value of metal conductor increases with the increase of temperature

Thermal resistance, thermocouple, integral temperature transmitter and bimetallic thermometer are used to measure the surface

temperature of liquid, vapor and gas medium and solid in the temperature range of( -200~1600) ℃ . It is generally used with display

instrument, recorder, regulator, PLC and DCS system.

Thermocouple (TC) is composed of two ends of conductors with different components connected into a loop. When the temperatures

of the two junction points are different, electromotive force will be generated in the loop. This electromotive force is called

thermoelectric potential, the magnitude of the thermoelectric potential is only related to the nature of the material of the conductor and

the temperature difference at the points at its two ends.

The integrated temperature transmitter is composed of temperature transmitter and thermal resistance or thermocouple, which

directly converts the temperature signal into two-wire (4~20)mA signal and is compatible with HART communication, LCD and LED

display.

In the bimetallic thermometer, the bimetallic sheet is applied as the temperature sensing element, one end of the bimetallic sheet is

fixed, and the other end is the free end connected with the indicator needle. The connection point generates displacement with the

change of temperature, and drives the pointer to rotate to indicate the temperature. The bimetallic thermometer is applicable to the

field of medium and low temperature measurement, and can directly measure the temperature of liquid, steam and gas medium within

the range of (-80~+600) ℃ in various production processes.

W Series Temperature 07 Transmitter

17

Main Features

Good adaptability to highly corrosive and abrasive media

Minor flows can be measured as low as 2L/h GPRS and Bluetooth wireless transmission available

Positive/negative flow measurement

No flow blocking piece, no pressure loss, and it is not easy to

block.

Compatible with multiple power supply modes such as battery

and solar power supply

Compatible with ModBus, HART and other Communication

protocols

Stable performance, good repeatability and high accuracy (up

to level 0.2)

Applicable to flow measurement of various conductive liquids

(conductivity> 1 μs/cm)

With non-linear correction of instrument coefficient, the

parameters can be modified online

Stainless steel mesh technology to be used under negative

pressure

Bluetooth and infrared remote control of mobile phone are

supported to operate without opening the cover.

EMF Series Smart 08 Electromagnetic Flowmeter

18

Overview

Vortex flowmeter is a velocity flowmeter, with a wide range of applications. It is applicable to the flow metering, measurement and control

of liquids, steam and most gases. It is designed as a new structure with resistance to mechanical vibration, impact and dirt. No moving

parts, wear and mechanical maintenance are required.

Low pressure loss, high accuracy, easy to install and use, stable performance.

The sensor and signal converter can be matched as customized.

LUGB Vortex 09 Flowmeter

19

Main Features

Various types of indicator

Geomagnetic compensation function Self-damping indicator

Powerful software capabilities

Unique measuring tube and magnetic coupling structure

Dual indicator System

Easily connected opto-isolated output

Scientific Lead Interface

Superior anti-interference performance Multiple installation and power supply modes are available

SF20 Smart Metal Tube 10 Float Flowmeter

20

Overview

The turbine meter is based on the principle of torque balance, as a velocity type flowmeter. The utility model has the advantages of high

accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is applied in measuring the volume

flow of low viscosity liquid in sealed pipes. It can be widely applied in the petroleum, chemical, metallurgy, water supply, paper and other

sectors.

The turbine flowmeter is applicable to the measurement of the liquid with stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3 and

cemented carbide in the closed pipeline, which is anti-corrosive and is free of impurities such as fibers and particles, it can also be used to

measure conventional gases and vapors.

YHLW Turbine 11 Flowmeter

21

CVP2000 smart valve positioner is a new generation valve positioner with remote configuration and communication functions, which

is installed on the actuator of pneumatic straight stroke or angular stroke. This product integrates the advanced technology and

characteristics of similar products at home and abroad, and can be widely used in petroleum, chemical industry, chemical fiber, light textile,

metallurgy, electric power and other sectors. The product is compliant with the explosion-proof standards of GB3836.1-2010, GB3836.4-

2010 and GB3836.20-2010. The explosion-proof mark of the product is Ex ia II C T4/T5/T6 Ga.

Overview

21

Main Features

Intrinsically safe, explosion-proof, safe and reliable Two-wire (4-20)mA standard signal

Less mechanical parts and good seismic performance Parameters can be set locally or remotely

Adjustment accuracy up to 0.5% FS Low power, low gas consumption, low operating cost

The display is made of OLED and can operate at lower

temperature.

CVP2000 Smart 12 valve positioner

22

Gas detector with LED display is a gas detection instrument, which is widely used in petrochemical, metallurgical, coal mine, medicine,

electricity and city gas sectors.

Flameproof design is adopted for the product, and standardized digital interface is adopted between the modules, which can flexibly realize

hot-plug replacement of the sensor in the field.

Overview

Main Features

LED super highlight

Modularized design Plug and play and replaceable sensor

Left and right double inlets, external audible and visual alarm Smart I-sensor technology

Infrared remote control operation, non - open - cover

configuration and calibration

Multiple status indicator

Zero drift automatic compensation Programmable alarm relay output

Smart sensor technology, self-identifying sensor

characteristics

DMD Series Point 13 Gas Detector

23

DMC Series Combustible Gas

Alarm Controller

DMC3000 combustible gas

alarm controller

DMC6000 combustible gas

alarm controller

32-way isolated (4~20) mA output signal

64-way 2/3-wire (4-20)mA current signal gas detector

TFT color 7 \"high resolution display (800x 480 pixels, 65K)

Built-in 32-bit processor with CAN bus connection inside the module

Audible and visual alarm, with sound ≥ 85dBA, divided into low-limit alarm, high-limit alarm and fault alarm

256-channel RS485 bus signal gas detector system with 3 sets of high-power programmable relay contact outputs

The system has 8 slots, any of the following 4 types of plug-in modules: current loop input module, current loop output

module, bus module, relay module

TFT color 5 \"high resolution display

4 sets of high-power programmable relay contact outputs

Compatible with 6-way 2/3-line (4-20) mA current signals and 64-way RS485 bus signal gas detectors

Users are allowed to select real-time gas concentration histogram monitoring interface or tabular display interface

according to their needs

The external control equipment can be automatically controlled, and the action delay time (0~30) seconds

can be selected

24

GDS Combustible Gas and Toxic

Gas Detection System

Main Features

Multiple LED status indicators

TFT color 5 \"high resolution display

It can monitor the connection line, sensor fault and alarm

status of the detector and display the gas concentration value

of each detector in real time

The most recent 1000 alarms, 1000 faults, switch on/off and

other event history and query functions

Adjustable points for audible and visual alarm and two-level

alarm

All interfaces have lightning protection design and EMC

protection

25

Main Features

Non-contact radar, no wear, no pollution

Small antenna size for easy installation

Shorter wavelength for better reflection on inclined solid

surfaces

The measuring blind area is smaller, and good results can be

obtained for the measurement of small tanks.

The beam angle is small, the energy is concentrated, the Echo

capability is enhanced, and the disturbance is avoided

Not affected by corrosion and foam

Unaffected by changes in water vapor, temperature and

pressure in the atmosphere

Severe dust environment will not affect electromagnetic wave

operation

High signal-to-noise ratio, excellent performance even in

fluctuating conditions

High frequency, suitable for the measurement of solids and low

dielectric constant media

SL90 Radar 14 Level Gauge

26

Main Features

Non-contact and never worn

The sensor does not require repeated calibration or regular

maintenance

The output signal provides multiple position and temperature

outputs

Multiple output modes including voltage, current, and RS485 High resolution, high accuracy, stable and reliable, fast response

Product Application

Tank level measurement TDam water level monitoring

Liquid level control in chemical process Tank level control

Potable water and sewage treatment Food and beverage liquid tank control

Inspection and control of guide vane opening of water turbine

Industrial field level measurement and control Inspection and control of the opening of the air-lock valve of

the steam turbine

SL80 Magnetostrictive Level 15 Gauge/Level Transmitter

Overview

The float level gauge is divided into a float level transmitter and a float level controller.

Float liquid level transmitter can be locally displayed, also on an on-site basis, it is capable of measuring liquid level change and converting

(4~20)mA standard signal output, at a conventional operating power supply of DC 24V, with a two-wire system; the transmitter can be used

for on-line measurement and control in petroleum, chemical, metallurgy, environmental protection and other sectors.

Float level controller, also known as float level switch, is the simplest and the most practical level control switch. It can be divided into sidemounted type (horizontal side-mounted) and top-mounted type (vertical top-mounted) by its installation form; or it can be divided into

common type, explosion-proof type and marine type by its application; or it can be divided into the common type and self-test type by its

detection method.

SL20 Float 16 Level Gauge

27

Main Features

Corrosion-resistant, explosion-proof, intuitive display, variable direction

Simple structure, convenient installation and easy maintenance

Optional field display, remote transmitter, level controller

The display component is completely isolated from the measured medium, and the sealing is reliable.

Applicable to liquid level measurement of liquid medium in container

SL10 Magnetic Level 17 Gauge

28

29

HD5500 Series 18 Safety Barrier

30

High conversion accuracy Design of Triple Redundancy Circuit

hot-swappable, each terminal can be hot-swapped, easy to

install and maintain

Complete line fault indication to facilitate rapid location and

search of fault points on site

No grounding is required to eliminate the interference caused by

the grounding loop.

It can significantly reduce the quantity of wires in the cabinet and

is available in the power supply function of guide rail

Various configuration schemes: dedicated communication cable,

wireless Bluetooth configuration

Three-port isolation of input/output signal and power supply

constitutes a fully floating system, greatly simplifying the

handling of field problems

Isolate the fault point to avoid the impact of one point fault

on the whole system, even in the event of lightning strike, the

system can be prevented to the greatest extent

[Ex ia Ga]IIC explosion-proof grade, applicable to the most dangerous zone 0 dangerous places and the most dangerous medium. With

[Ex iaDa] flammable dust safety and explosion-proof Mark, can be used in each group of explosive dust explosion-proof sites

Low power consumption and effective heat dissipation

structure design effectively reduce the temperature rise of

the cabinet under intensive installation conditions, improve

product reliability and prolong service life

12.5mm ultra-thin design, compliant with the modern control

of intensive installation requirements, space-saving, further

integrated

Functional serialization to meet the widest range of functional

requirements in process control such as signal isolation,

power distribution, and signal transformation

Main Features

HD5500 series safety barrier isolates power supply, input terminal signal and output terminal signal through optical, electrical and

magnetic isolation technology, so as to realize the isolated transmission of digital/analog signals between the field intrinsically safe

equipment and the control room equipment, therefore it is an ideal isolation interface unit between the field intrinsically safe equipment

and the control room equipment. HD5500 series isolated safety barrier shall be designed in accordance with national standards (GB3836.1-

2010, GB3836.4-2010, GB3836.20-2010, GB12476.1-2013 and GB12476.4-2010), meet intrinsically safe and explosion-proof requirements,

and have strict isolation and energy limitation capabilities, the intrinsically safe explosion-proof system can be formed together with

intrinsically safe explosion-proof equipment installed in dangerous places, and the electric energy flowing to the dangerous area can be

limited through the internal comprehensive pressure-limiting and current-limiting design, so as to ensure the safety of electrical equipment

and personnel in dangerous places.

HD5500 series isolated safety barrier is labeled with [Ex ia Ga] combustible gas, [Ex ia Da] combustible dust intrinsically safe and explosionproof mark, and has been granted National

Explosion-proof Certificate (Certificate No: GYB18.1862 ~ 1872/GYB19.1195), International Explosion Protection Certificate (Certificate No.:

CN/NEP/QAR19.0011/00), European Union Explosion Protection Certificate (Certificate No: baseefa19ATEX0105 ~ 0109) and CE Certificate

(Mode B + Mode C); it can be used in explosive gas and dust explosion-proof places of various groups.

HD5500 full series isolated safety barrier covers the following equipment functions: thermal resistance temperature signal transmitter,

thermocouple temperature signal transmitter, millivolt signal transmitter, distributor, signal distributor, intermediate drive relay, etc.

Overview

3131

3232

33

Main Features

Compatible with DIN35 rail, baseplate mounted

Triple redundancy protection

Compatible with wide voltage and non-polarity input of

control power supply

The terminals \"plug and play\" can be hot-swappable with

electricity for easy installation and maintenance

The housing is thin and small, minimizing the space for

installation

Protection design for channel limitation of relay output switch

Compatible with upper port and supporting backplane input

control power supply

Safety relay is the main component of safety control loop, which receives safety control signal input, outputs relay switch signal and is

connected to the control loop of equipment.

It is capable of receiving wide voltage (16~35)VDC control switch signal; it can achieve safe and reliable isolation circuit through triple

redundancy technology, automatic protection technology, contact fusion bond protection technology and other technologies.it allows

single-circuit or double-circuit operation and is compatible with rail and baseplate mounting. The product is in compliance with the

requirements of IEC61508 standards, and the safety function integrity reaches SIL3 level.

Overview

HD2000 Series 19 Safety Relay

33

34

HD1000 series barriers isolate power supply, input terminal signal and output terminal signal using optical, electrical and magnetic isolation

technology, so as to realize isolated signal transmission between field equipment and control system, it is an isolation interface unit

between the field equipment and the control room equipment; The isolation technology completely isolates the input and output signals

electrically, greatly improving the anti-interference and reliability of the electronic system, at present, more and more interfaces between

industrial control systems and field devices are equipped with isolated interface units to replace the original non-isolated units.

HD1000 full series barrier covers the following equipment functions: thermal resistance temperature signal transmitter, thermocouple

temperature signal transmitter, millivolt signal transmitter, distributor, signal distributor, intermediate drive relay, etc.

Overview

Main Features

No grounding required High density installation Provide one-in and two-out functions

DIN rail independently mounted Isolate the fault point Serialization of modules

Three-port isolation of input/output signal and power supply

High isolation voltage Hot-swappable High conversion accuracy

HD1000 Series 20 Barrier

35

H series signal type SPD is mainly used to protect field devices such as transmitters, switches, frequency signals, communication

equipment, thermal resistance, thermocouples, etc. connected in two-wire and three-wire systems, as well as control indoor safety barriers,

I/O, DCS, PLC and other equipment to protect it from lightning, surge, impulse voltage or operating overvoltage damage.

Overview

Explosion-proof parameters

Explosion-proof mark: Ex ia C T4 T6 Ga

Explosion-proof certificate number: GYB20.1413X

Standards compliant:

GB 3836.1 Explosive atmosphere Part 1: General requirements for

equipment

GB 3836.4 Explosive atmosphere Part 4: Equipment protected by

intrinsically safe \"i\"

GB 3836.20 Explosive atmosphere Part 20: Equipment with equipment

protection level (EPL) of Ga level

Main Features

Hot-swappable, uninterrupted after dialing out

Lightweight design, save space

The rail is directly grounded

High bandwidth, low insertion loss, suitable for all kinds of

signals

Surge protection 21 Device (SPD )

Ⅰ

H Series Signal SPD

36

S series signal SPD is mainly used to protect field equipment such

as transformers, switches, frequency signals, communication

equipment, thermal resistance, thermocouple, etc. which can be

connected in two-wire and three-wire modes, as well as safety

barrier in control room and I/O, DCS, PLC and other equipment,

and can protect it from lightning surge impingement to electrical

voltage or operating overvoltage.

Overview

P series DC power SPD is designed according to IEC, GB and

other standards, which can connect the protected line into the

equipotential system at the moment of surge generation, and limit

the voltage to a certain level, thereby protecting the consumer's

electrical equipment properly.

Overview

Main Features

Operating status indication

Remote signaling function (specified when ordering)

Hot-plug compatible with easy maintenance

Main Features

Intrinsically safe and explosion-proof certification

7.6mm ultra-thin, space-saving

Grounded via the earthing terminal or directly via the guide rail

High bandwidth, low insertion loss, suitable for all kinds of

signals

ⅡS Series Signal SPD ⅢP Series DC power SPD

37

1994, China's first paperless recorder was born in the SUPCON. Over the past 25 years, more than 200000 control room instruments have

been applied in 6000 companies around the world. With its excellent design, reliable quality and wide adaptability, the SUPCON products

have been highly praised by the industry.

The products are complete in series, rich in models, with open software and hardware platform, realizing the functions of data collection,

recording, analysis and operation, and having complex control functions. Through the powerful host computer software, the field data can

be remotely monitored and managed, and the data can be transmitted in an abundant manner.

Overview

Main Features

Event recording/trigger recording Operation function: 60

Universal signal point isolation input PID parameter self-tuning

Data acquisition manual automatic start/stop Minimum sampling and control period: 125ms

Analog/switching/time proportional output Timer/program/PID/ON_OFF control optional

Smart Secondary 22 Instrument

38

AR7000 Touch Screen Paperless Recorder

C3900 Process Controller F1000 Flow Totalizer

4-way PID control

3-way program control

6-way ON/OFF control

PID parameter self-tuning

Operational expression function

S y n c h r o n o u s /a s y n c h r o n o u s

program control mode

Flow accumulation

Printing function

Information sheet

RS232/RS485 communication

Flow calculation and temperature

compensation

AR7100 Touch Screen Batch Recorder

Analog input: 24 ways

Analog output AO:6 ways

Switching input DI:3 ways

7 'Touchscreen Interface

3-way DI +16-way DO

6 - w a y A I + 2 - w a y A O

(extensible)

Switch output DO:16 ways

Pulse input PI:3 ways

Way time proportional output

PWM:8 ways

Operational expression function

Ethernet +485 interface

Full compliant with FDA 21 CFR

PART11

39

R1000 F1000 AR3000/AR4000

CPU Type 32-bit ARM 32-bit ARM 32-bit ARM

Type of LCD STN Monochrome STN Monochrome 5.6 “TFT True Color/Blue Screen

Backlight Type LED LED LED

Screen Resolution 128*64 128*64 320*234

Maximum Number of AI Ways 3 3 12

Input Signal Type

Type II/III standard signal,

millivolt signal, thermocouple,

thermal resistance signal

Frequency signal, Type II/

III standard signal, millivolt

signal, thermocouple, thermal

resistance signal

Frequency signal, Type II/III

standard signal, millivolt signal,

thermocouple, thermal resistance

signal

Minimum Sampling Period 1s 1s 1s

Display Refresh Velocity 1s 1s 1s

Maximum Accuracy ± 0.05% ± 0.05% ± 0.05%

Maximum Number of DO Ways 4-way 4-way 12-way

Power Distribution Output

24VDC,30mA/60mA/100mA

Optional

24VDC,30mA/60mA/100mA

Optional

24VDC,30mA/60mA/100mA

Optional

Flow Accumulation/Temperature

Compensation

Yes Yes Yes

Flow/Heat Report ------ ------ Yes

Operation Function ------ ------ ------

Switching Value Recording

Function ------ ------ ------

Communication Interface RS232/RS485 RS232/RS485 RS232/RS485/Ethernet

Communication Protocol Modbus Modbus Modbus

Internal Storage Media 3MB FLASH 3MB FLASH 32MB NAND FLASH

External Storage Media ------ ------ USB drive

Protection Class of Front Panel IP54 IP54 IP54

Safety Standards IEC61010-1:2001 IEC61010-1:2001 IEC61010-1:2001

EMC Standard IEC61000 IEC61000 IEC61000

Dimensions of Openings (mm) 152*76 152*76 138*138

Power Supply (100~240)VAC or 24VDC (100~240)VAC or 24VDC (100~240)VAC or 24VDC

Paperless Recorder

40

AR3100/AR4100 R5000 AR7000

CPU Type 32-bit ARM 32-bit ARM 32-bit ARM

Type of LCD 5.6 “TFT True Color/Blue Screen 10.4 “TFT True Color

7 inch TFT True Color Touch

Screen

Backlight Type LED LED LED

Screen Resolution 320*234 640*480 800*480

Maximum Number of AI Ways 12 32 24

Input Signal Type

Frequency signal, Type II/

III standard signal, millivolt

signal, thermocouple, thermal

resistance signal

Type II/III standard signal,

millivolt signal, thermocouple,

thermal resistance signal

Frequency signal, Type II/

III standard signal, millivolt

signal, thermocouple, thermal

resistance signal

Minimum Sampling Period 0.125s 1s 0.5s

Display Refresh Velocity 1s 1s 1s

Maximum Accuracy ± 0.05% ± 0.05% ± 0.05%

Maximum Number of DO Ways 12-way 32-way 16-way

Power Distribution Output 24VDC,30mA/60mA/100mA

optional

24VDC,30mA/60mA/100mA

optional 24VDC,150mA

Flow Accumulation/Temperature

Compensation

Yes Yes Yes

Flow/Heat Report Yes Yes Yes

Operation Function Yes ------ Yes

Switching Value Recording

Function

Yes ------ Yes

Communication Interface RS232/RS485/Ethernet RS232/RS485 RS232/RS485/Ethernet

Communication Protocol Modbus Modbus Modbus

Internal Storage Media Maximum 128MB NAND FLASH Maximum 128MB NAND FLASH 1GB NAND FLASH

External Storage Media USB drive USB drive USB drive

Protection Class of Front Panel IP54 IP54 IP65

Safety Standards IEC61010-1:2001 IEC61010-1:2001 IEC61010-1:2001

EMC Standard IEC61000 IEC61000 IEC61000

Dimensions of Openings (mm) 138*138 282*282 138*138

Power Supply (100~240)VAC or 24VDC (100~240)VAC (100~240)VAC

41

C1000 C3900

CPU Type 32-bit ARM 32-bit ARM

Type of LCD STN Monochrome 5.6 “TFT True Color

Backlight Type LED LED

Screen Resolution 128 × 64 320*234

Maximum Number of AI Ways 3 12

Input Signal Type

Frequency signal, Type II/III standard signal, millivolt signal, thermocouple, thermal

resistance signal

Frequency signal, Type II/III standard signal, millivolt signal, thermocouple, thermal

resistance signal

Minimum Sampling Period 1s 0.125s

Display Refresh Velocity 1s 1s

Maximum Accuracy ± 0.05% ± 0.05%

Number of PID Control Loops 1 4

Maximum Number of DO Ways 4-way 12-way

Power Distribution Output 24VDC,30mA/60mA/100mA optional 24VDC,30mA/60mA/100mA optional

Flow Accumulation/Temperature Compensation ------ Yes

Operation Function ------ Yes

Switching Value Recording Function ------ Yes

Communication Interface RS232/RS485 RS232/RS485/Ethernet

Communication Protocol Modbus Modbus

Internal Storage Media 3MB FLASH 128MB FLASH

External Storage Media ------ USB drive

Protection Class of Front Panel IP54 IP54

Safety Standards IEC61010-1:2001 IEC61010-1:2001

EMC Standard IEC61000 IEC61000

Dimensions of Openings (mm) 152*76 138*138

Power Supply (100~240)VAC or 24VDC (100~240)VAC or 24VDC

Process Controller

42

E6500 C7000

CPU Type 32-bit ARM 32-bit ARM

Type of LCD 5.6 “TFT True Color 7 inch TFT True Color Touch Screen

Backlight Type LED LED

Screen Resolution 320*234 800*480

Maximum Number of AI Ways 12 24

Input Signal Type

Frequency signal, Type II/III standard signal, millivolt signal, thermocouple, thermal

resistance signal

Frequency signal, Type II/III standard signal, millivolt signal, thermocouple, thermal

resistance signal

Minimum Sampling Period 0.125s 0.5s

Display Refresh Velocity 1s 1s

Maximum Accuracy ± 0.05% ± 0.05%

Number of PID Control Loops 4 8

Maximum Number of DO Ways 12-way 16-way

Power Distribution Output 24VDC,30mA/60mA/100mA optional 24VDC,150mA

Flow Accumulation/Temperature Compensation Yes Yes

Operation Function Yes Yes

Switching Value Recording Function Yes Yes

Communication Interface RS232/RS485/Ethernet RS232/RS485/Ethernet

Communication Protocol Modbus Modbus

Internal Storage Media 128MB FLASH 1GB FLASH

External Storage Media USB drive USB drive

Protection Class of Front Panel IP54 IP65

Safety Standards IEC61010-1:2001 IEC61010-1:2001

EMC Standard IEC61000 IEC61000

Dimensions of Openings (mm) 138*138 138*138

Power Supply (100~240)VAC or 24VDC (100~240)VAC

4343

SUPX600 Interactive 23 Smart Calibrator

44

Ⅰ

Integrating Process Calibrator/HART Handheld

Communicator as a whole

Compatible with HART communication

The accuracy of process calibrator can be up to 0.01

Ⅱ

Allowing separate operation, as a site engineer's

best solution

Operator module and signal measurement module can be used separately

It is easy in signal spot check or commissioning for equipment within 10 m range

ⅢIndustrial aesthetic design, friendly humancomputer interaction

Wiring Method of Dynamic Prompt

Multiple means are optional to set the output

5.5 \"HD full-color display, icon-touched

Its output may be set by step value \\fast \

ectangular wave, triangular wave,

stepped wave, etc.

ⅣBuilt-in rich value-added

functionality

Built-in signal recording function to record signal changes over time

Built-in process calibration function for rapid calibration of safety barriers,

temperature transmitters, etc.

Built-in thermocouple and thermal resistance conversion tool for fast calculation

45

X207 HART Handheld Communicator is a portable device that communicates with a HART protocol smart pressure transmitter, which is

fully compliant with the HART protocol second master device specification, it is a necessary tool for testing and parameter adjustment

of transmitter in industrial field. X207 which not only supports basic commands such as reading device type, reading master variable,

modifying tag number, modifying range, etc., and also supports reading various process variables, modifying the output mode and other

general commands and special commands such as sensor adjustment and output adjustment.

Overview

Main Features

24V power distribution output

Accuracy: 0.02%

Chinese operation interface

Voltage/current measurement

Miniaturized design for hand-held

portability

4.2Ah lithium battery

Battery level indication

3.5-inch white LED-backlit LCD

Compatible with HART protocol

Coexistence of function keys and

numeric keys

Universal micro-usb charging interface

with mobile phone

Integrated two-color casing, strong

and durable and non-staining

X207 HART Handheld 24 Communicator

46

The X Series Process Calibrator is a high-precision handheld signal measurement/output instrument, which is capable of simultaneously

measuring and output voltage, current, resistance, frequency, thermocouple, thermal resistance, pulse and other industrial process signals,

with the highest accuracy of ± 0.01% FS.

X series process calibrator can replace current signal source, voltage signal source, resistance box, electronic potentiometer, frequency

meter and other measuring and calibration instruments, independent dual-way design, can be measured and output at the same time.

Built-in 90 International Temperature Scale, thermal resistance, thermocouple two-way look-up table operation.

Overview

Main Features

Signal measurement/output reset

Pulse count

Calibration function

Frequency measurement/output

Voltage measurement/output

Current measurement/output

Switching of Celsius and Fahrenheit

scales

Analog two-wire transmitter signal

2/3/4-wire system thermal resistance

measurement

Synchronous display of temperature

value and signal value

Two-way indexing of 90 International

Temperature Scale

24V DC power supply with overcurrent

protection

46

X Series Process 25 Calibrator

47

The centralized supQFS smart loading system is a part of the smart storage and transportation management system in the tank farm. The

system takes loading and unloading control as the core, and the whole process of sales, planning, production and other links will be opened

up, on the basis of ensuring safe loading and unloading operation. The whole process of loading and unloading business can be controlled,

scheduled and managed on a “smart” basis.

The system is modularized and integrates electronic, network, explosion-proof, radio frequency identification, quantitative control and

other technologies to realize functional information interaction, business data sharing and management. The system can solve the

enterprise security, function, information and other applications of pain points, difficulties, optimize the business experience of customers.

The SUPCON smart loading system is provided with two kinds of architecture, the distributed control system based on SQI series batch

controller and the centralized control system based on DCS and field operator. The system includes controller, operator, flowmeter,

electro-hydraulic valve/pneumatic two-stage Ball Valve, electrostatic oil spill protector, vehicle key manager, fuel delivery pump and other

equipment and instrument terminals, integrated SQS loading integrated management software, therefore the control of loading and

unloading of liquid materials is safer, more precise and more efficient.

Overview

supQFS Smart Ration Loading 26 & Unloading System