汤屋暖杯垫
ZAY-N07
参数说明：
产品图示： 使用说明：
使用说明：
注意事项：
使用前请仔细阅读本说明书。
严格按照说明书要求正确使用，并妥善保存说明书。
本说明书的内容及产品的规格技术说明如有变更，恕不另行通知。
Intelligent Thermostatic Coaster
ZAY-N07
Please read this instruction manual carefully before use
Use it correctly in strict accordance with the instructions, and keep the instructions properly
The contents of this specification and the product specifications are subject to change without prior notice
产品名称: 汤屋暖杯垫 产品型号: ZAY-N��
额定电压：���V 额定频率：��Hz
产品尺寸：���*���*��mm 额定功率：��W
执行标准：GB����.�-����/GB����.��-����
产 地：中国深圳
使用前请仔细阅读本说明书，严格按照说明书要求正确使用，并妥善保存说明书以
备后续使用。
产品在工作时严禁触摸加热区，防止高温烫伤，请特别注意儿童。
如果电源线损坏，为了避免危险，必须由制造商专业人员进行更换。
清洁保养：
�：清洁保养时，先拔掉电源插头，等机体冷却后方可进行。
�：产品长期不用，请清洁干净，置于通风和干燥的地方，避免受潮。
不得用湿手操作产品开关或拔电源线，以防止触电。
本产品不适用于身体，感官或智力上有缺陷的人士或缺乏经验和常识的人士使用，
除非有他人能确保其安全，对其进行监管。
本产品必须放置在平坦的桌面使用。
不得随意分解机体，不得对本产品进行任何形式的改装，以免发生危险。
如表面破裂，不得使用该产品。
使用完毕，外出或长时间不使用时，请拔下电源插头。
�：第一次单击按键开启暖杯垫��℃，同时打开按键灯光，显示屏显示��℃。
�：第二次单击按键开启暖杯垫��℃，同时按键灯光保持不变，显示屏显示
当前温度��。
�：第三次单击按键开启暖杯垫��℃，同时按键灯光保持不变，显示屏显示
当前温度��℃。
�：第四次单击按键开启暖杯垫��℃，同时按键灯光保持不变，显示屏显示
当前温度��℃。
�：第五次单击按键关闭暖杯垫，同时关闭按键灯光及显示屏。
�：当暖杯垫工作时，自动定时�小时，�小时后自动关闭暖杯垫所有功能。
加热区
加热按键
数码显示屏
Product Description：
Product View：
Product name: Intelligent Thermostatic Coaster
Product model: ZAY-N�� Rated voltage: ���V
Rated frequency: ��Hz Rated power: ��W
Product size: ��� * ��� * ��mm
Execution standard: GB����.�-����;GB����.��-����
Origin：Shenzhen, China
Heating area
Switch buttons
Display screen
Direction For Use：
Timed function：
Caution：
Please read this instruction manual carefully before use ，Use it correctly in strict
accordance with the instructions, and keep the instructions properly
Do not touch the heating area when the product is working to avoid scalding,
Please take special attention to children.
If the power cord is damaged, it must be replaced by the manufacturer's
professional to avoid danger.
Do not operate the product switch or pull power cord with wet hands to prevent
electric shock.
This product is not suitable for use by people with physical, sensory or intellectual
disabilities unless someone else can ensure its safety and supervise it.
The product must be placed on a flat desktop for use.
Do not attempt to take apart the heater to perform maintenance.This type of
maintenance repair should only be done by a professional.
Do not use the product function if the product is damaged.
Always turn off and unplug the heater when not in use.
1.Press the button for the first time to open the product for 45℃, and turn on the
button light at the same time. The display screen shows 45℃.
2.Press the button for the second time to open the product for 55℃, and the button
light remains unchanged. The display screen shows 55℃.
3.Press the button for the third time to open the product for 65℃, and the button
light remains unchanged. The display screen shows 65℃.
4.Press the button for the fourth time to open the product for 75℃, and the button
light remains unchanged. The display screen shows 75℃.
5.Press the button for the fifth time to close the product, and close the light and
display screen.
When the product is turned on, it is automatically scheduled for 8 hours, and after
8 hours, all functions will be automatically turned off.
产品保修卡
（本卡仅适用于中国地区）
产品名称： 联系电话：
产品型号： 购买渠道：
用户姓名：
退换货理由：
Cleaning and maintenance：
1.During cleaning and maintenance, unplug the power plug first, and wait
until the product temperature is cooled.
2.If the product is not used for a long time, please clean and place it in a
ventilated and dry place to avoid damp. ~
~
