Solar street light installation drawings - wind-solar hybrid street light installation instructions

Wind-powered hybrid street light installation diagram and system wiring instructions

1.Connect the light fixture wire and solar panel wire to the male and female plugs respectively.

2. Connect the male and female plugs of the light fixture wire to the solar output terminal of the battery.Wait about one minute for the light to turn on.

3.Then connect the solar panel wire to the solar panel input terminal of the battery.Wait about one minute for the light to turn off.The system is now on positive and negative.

4.Connect thefan to thefan terminal of the battery, paying attention to the positive and negative terminals.

5.Finally, connect the output terminal of the AC/DC power supply switch to the input terminal of the high-voltage battery, and then connect it to the AC power supply.

Solar panel and main pole fixing screws

1. Connect the male and female plugs of the light fixture to the battery's light output terminal. The light should turn on approximately every minute.

2. Then plug the solar panel cable into the battery's solar panel input terminal. After about one minute,the light should turn off, indicating the system is working properly.

3.The solar panel should face 5-15 degrees west of south.

4. There should be no obstructions on top of the solar panel.

First: Thread the main power line inside the light pole (from the end of the upper support arm to the junction box).

Second: Connect the light fixture power cord to the main power line.

Third: Install the light fixture and tighten the screws.
Fourth: Install the upper support onto the light pole,adjust its position and orientation, and tighten the screws.

Fifth: Check all parts of the light fixture and install it securely.

Sixth:Adjust the light fixture's direction and position, and lock the flange.

Seventh: Connect the power cord and ground wire at the junction box and lock the door.

3.2V Lithium Battery Installation Diagram

1.The battery controller inside the light fixture is already wired.
2.Connect thelight fixture's wires to the solar panel's wires, cover the panel, and the light will turn on.
3.The solar panel should face 5-15 degrees west of south.
4.There should be no obstructions on top of the solar panel. First: Thread the main power line inside the light pole (from the end of the upper support arm to the wiring gate).
Second: Connect the light fixture power cord to the main power line.
Third: Install the light fixture and tighten the screws.
Fourth: Install the upper support onto the light pole, adjust its position and orientation, and tighten the screws.
Fifth: Check all parts of the light fixture and install it securely.
Sixth:Adjust the direction and position of the light fixture and lock the flange.

1 Load does not work (Lamp fails to light up)

(1) The controller adopts light control mode in daytime.
(2) Insufficient remaining power of the battery.
(3) Check whether the wiring is correct.
(4) Disconnect all wires, repeat the above installation steps and let the controller re-identify the devices.

2

Works normally for the firstfew days then stops working (1) Incorrect wiring of the solar panel. (2) Poor connection of the solar panel

3

Light control function invalid (1) Incorrect wiring of the solar panel. (2) This function is not enabled, please reconfigure the settings

4

Load runs immediately afterpoweron; neither light controlnor time control takes effect

(1) This function is not enabled, please reconfigure the settings.
(2) Ambient light received by the solar panel is too strong.

5

Operation indicator light keepsflashing non-stop (1) Short-circuit of the load or overload

After signing the supply contract, our company will maintain reserves according to the contracted batch quantities,rationally allocate inventory,and prioritize the supply of goods required for this project. We will also deliver the goods to the user's designated location on time and safely,according to the buyer's requirements and delivery schedule.Regardless of the transportation method used，we guarantee the supply volume according to the procurement plan and ensure the necessary peak-shaving transportation capacity to meet the user's needs. Upon delivery, we will provide relevant quality certification documents for the contracted goods (such as certificates of conformity， inspection reports，etc.） to ensure delivery quality. Our company is responsible for handling the necessary transportation procedures for shipping the contracted goods and the transportation before delivery. We assume the risk of damage or loss of the contracted goods before they arrive at and are unloaded at the agreed delivery location. We are responsible for promptly replenishing, repairing, or replacing any contracted goods lost or damaged due to risk, ensuring that the customer can use the best products in a timely manner.

Upon arrival of the goods at your designated location， our company will arrange technical personnel to provide on-site technical services. These personnel will guide the installation and assist with pre-production equipment handover testing and commissioning. At the time of delivery, our company willprovide corresponding spare parts, supporting tools, product certificates， product instruction manuals， warranty cards， and other relevant supporting documents. All supplied goods and accessories will have a certificate of conformity label affixed， indicating the product model， specifications， material, manufacturing date, and inspection report.

Our company strictly adheres to the requirements of the ISO900l quality assurance system and consistently upholds the principle of "Quality First， Service First." From contract review，equipment procurement,and equipment acceptance,we implement rigorous quality control at every stage, with meticulous record-keeping at each level.This ensures the traceability of quality control records and guarantees that no substandard products will be delivered to our clients. Every product is 1 0 0 % qualified. In future cooperation, our company will provide high-quality and comprehensive pre-sales,sales,and after-sales services to ensure our clients receive excellent value for their money.

Our quality commitment to the products and equipment provided to our clients is as follows:

1) Our company provides a two-year warranty on the supplied goods. During the warranty period, we provide free support including troubleshooting,performance optimization,and technical consultation.We also provide professional training to system administrators and relevant personnel to handle common unexpected failures. No additional fees will be charged during the warranty period.

2) Our company guarantees that the goods we supply are brand new,unused,and genuine products that fully comply with current national, industry,and regional regulations and standards.We guarantee that the goods will performsatisfactorily under correct installation,normal use,and maintenance conditions throughout theirlifespan. Our company is responsible for any product usage problems arising from product quality defects or our own reasons, and all costs will be borne by our company.

3) The products and equipment that our company intends to provide to the user are high-quality products certifiedby national authoritative institutions,with qualified factory certificates,and are permited for market distribution. Our company willstrictly adhere to the service commitments made during the bidding process. Upon delivery,our company will provide product certificates, instruction manuals, warranty cards, and other relevant supporting documents.

4) If a product has a quality issue within the warranty period, our company promises to strictly fulfillte obligations stipulated in the contract.For products beyond the warranty period,if the user requires repair,our company guarantees to provide repair services and will meet the user's requirements for spare parts at any time.

千吉QIANJI

Factory Address: FO9, No. 16, Zhongxing Fourth Road, Pengjiang District, Jiangmen City Marketing Center: 7th Floor, Building D, China Lighing Capital E-commerce City, No.368, Haizhou East BankNorth Road,Guzhen Town, Zhongshan City, Guangdong Province.5