Here need

epoxy resin

glue,which

prepared by

client

Here need

epoxy resin

glue,which

prepared by

Here need epoxy

resin glue,which

Here need epoxy

resin glue,which

316/304

Glass Suspending Clamp Here need

epoxy resin

glue,which

prepared by

Epoxy resin

glue is

recommended

Here need

epoxy resin

glue,which

prepared by

Epoxy resin

glue is

recommended

Tension

830

Performance Parameter

Minimum Breaking

Note: Besides the above tension cables, we also can fabricate the cable with higher strength.

Send your enquiry if in need, please.

Stainless Steel Tension Cable

316

Ordinary Tension Cable

Parameter of the Ordinary Tension Cable

Note: Besides the above mentioned tension cables, we also can fabricate the cable with higher

strength. Send your enquiry if in need.

Parameters of Locked Coil Strand

Cable Diameter

Sectional Area

Minimum Breaking

Force (kN)

Modules Elasticity

(10 N/mm )

Beside the cable strength and diameters above, our company can produce cables in higher

strength and bigger diameter. If any need, just contact us freely, please.

50

52

60

62

80

88

108

116

132

140

53

57

63

65

70

85

100

117

125

141

150

68

81

95

100

126

158

177

190

112

118

132

185

196

214

246

280

296

673

701

729

817

994

1063

1285

1413

1460

1593

1652

875

205

250

262

300

370

460

500

556

595

660

280

290

300

318

380

435

455

470

490

3

530

568

684

806

855

910

950

4

M52

M56

M60x4

M64

M72x6

M85x6

Tr100x6

Tr105x6

Tr115x6

Tr130x6

M

32

36

48

60

65

70

75

85

90

Notes: The above specifications are the corresponding sizes of ordinary cables. For the specifications of

2.The below format is the cable length that one adjusting end normally can adjust(L),if the

needed cable length is more than L of the below format ,it needs to add adjusting anchors or

consult KIN LONG company.

Tension cable common combination types as below figure

Order Instruction

Stainless steel tension cable has high strength, good corrosion resistance, and high stiffness characteristic.

Brightness appearance can maximum reflect metallic texture. It gets most of architects & clients approval.

Therefore, stainless steel tension cable gets widely application in construction cable structure. In order to

avoid abnormal appearing, we suggest paying attention to following points during the application:

1.Storage：

After the tension cable shipped to the construction site, it shall be inspected as soon as possible.

If not use immediately after the inspection qualified, the product should be still kept in the original packaging

box, and then deposits it according to the following conditions:

2. Installation:

Stainless Steel Tension Cable Application Instructions

(2) If the indoor storage conditions are not available, please pay attention to the above attentions and make

waterproof protection. besides weather enclosure or rain cover, please pad the product to prevent rainwater

from the bottom into the packages. If packages get wet, the product must be cleaned and change into new

(3)Please keep the packages for a period of time after taking out the tension cables for installation. The rest

tension cables must be stored in the original packages; Any product return or repair needs to send back to

(1) Tension cable deposit location should be indoors, storage environment should be ventilated, dry, no acid,

alkali, salt and water vapor in high temperature which bad medium could lead to stainless steel corrosion. Such

as the storage time more than one month, then half a month need to unpack to check regularly, to check if the

surface is rust. If there is any rust, need to find and eliminate the cause of the corrosion products, when the

(1) Before lifting, please check the thread engagement of the adjustable anchor, the thread engagement of

tension cable should be smoothly without stress, If can't goes smoothly, then should find the reason and

eliminate them. Common problems are like thread out of shape, thread damage, having sand & soil on the

thread. Solution refer to maintain with file, clear with steel brush, change the accessories etc. If the problems

(2) When lifting, for the small diameter tension cable, please straight the cable reverse to pay-off spool; For

the big diameter tension cable, pay-off while lifting, the lifting speed shall be same as pay-off speed to make

sure lift up the tension cable naturally. Prohibit vertical lift directly before the cable pay-off naturally. If the

cable is spiral when lifting, the lifting work must be stopped immediately. It can go on only after the cable is in a

natural state, please lift and pay-off with folk-lift or manpower if no pay-off spool is available. Two anchors on

both sides should be protected and the cable packaging should not be torn off when lifting to prevent scratching

(1) Tension cable should be handled gently on site, no throw or drop products, in order to avoid collision between

products or damaged by other hard products; During the installation, the product should also be well protected to

prevent scratches and crash, especially the thread part of the tension cable.

2) During installation,try to avoid welding. If have to, protection measures should be taken to avoid welding spark

or slag to splash down to the surface of the tension cable. Particular attention is that cable can not be used as a

welding lead.

3) If there are multi-cross operations on site, please protect the surface of tension cables away from cement

mortar, coating and other pollutants of other type of works. If the products getting pollution and corrosion, clients

①
In any case, it is forbidden to clean with chlorinated solution (such as bleaching fluid, 84 disinfectant

and etc.). When chlorinated solution be used for other purpose (e.g. disinfection), the stainless steel

should also be in a good protection.

②
Stainless steel gets rust is not only concerned with pollutants, but also with the ambient temperature,

humidity,atmospheric composition and so on. If the product get rust without any obvious pollutants,

besides timely rust cleaning, it need to find out the reason of corrosion and solution.

(2) Others:

Any product maintenance (such as prestress inspection and adjustment and etc.) doesn't mention

above, please carry on according to the current industry standard Glass Curtain Wall Engineering

Specifications

4. Maintenances：

3. Construction protection：

Please pay attention to the following points during maintenance:

)
Surface cleaning:

Stainless steel means it can have certain chemical stability around the corrosion mediums of air、water

acid、alkali、 salt or others.
But it does not mean the stainless steel will never rust. When come into

service, the dust and other pollutants on product surface may lead to stainless steel corrosion and even

rupture. Therefore, stainless steel tension cable must be regularly and daily cleaning. Regular cleaning

cycle should within one year; daily cleaning cycle depends on the pollution, if it will cause corrosion,

then cleaning or clearing. Since tension cable is multi-gap structure, liquid like water and detergent is

not allowed to spray on it, please wring the wet towel out or clean it with few detergent on the soft fabric.

(3) There is no need to use pay-off spool if the cable is short or have the enough space. Specific operations

are: keep the pay-off spool still, lift the anchor and pay-off opposite to the spool, then begin to lift.

(4) Once improper lifting operation caused cable warp, wire skip, strands loose or injured, please contact the

professional person to repair and check whether the product is available.

(5) After the cable lifting at proper position, confirm the length and dimension to make sure no dismounting any

Please pay attention to the following matters

when tensioning the cable:

Steel bar ( length

Instruction of Installation for Tension Cable by

\"Easy Pretention\" Series

Before tensioning, the thread should be checked

again and remove the attached sand, welding slag

Before tensioning, make sure the exposed thread

length is equal as picture shows.

Specified tension tools shall be use.

During tensioning, it is recommended to hand

screw or screw by inserting steel bar (L≤300mm)

into wrench hole. Normally, one hand can easily

turn the screw (no more than 5KG force). If the

above method can not easily turn the screw, it may

cause by improper tools or adjustment, please

It is forbidden to add extension bar, chain wrench,

pipe wrench or any similar tools to screw. If any

operation against above causes tension difficulty

or product damage. KIN LONG will not take any

1. We compiled this catalogue carefully, and based on

familiarity and understanding to our products currently, the

information in this catalogue is correct and reliable, but if

any inadequacy in the catalogue, welcome to contact us.

2. Please be informed and understood that some contents are a

little different from previous versions. We suggest selecting

the products from the latest version. Please contact our local

offices to check the production and storage information if

the requested products are in the previous versions.

3. After publication. KIN LONG may update some product

improvements (as applicable). which will not affect

applicaton. Subject to technical changes without further

notice. If you can't select suitable product parameters/

characteristics or any other doubt in the catalogue, please

contact our local offices directly or check our website

www.kinlong.com for further information.

Statement

Installation Tools

T: 0086-769-82166666 82136666

F: 0086-769-82955240 82955241

E: mail@kinlong.com

Guangdong Kinlong Hardware Products Co.,Ltd.