LINE ARRAY

BLA-SUB218A MAX DUAL 18" POWERED SUBWOOFER Active - DSP - Easy configuration - RS485

TheBLA-SBisactiotroldal18subwooferspowredfomanebwoeommeddfoee touringsystemsdusubsanstisDassopliouleitprovdeexteddoudpreee lowfreiii section for a quick setup of your complete system.

TheBLA-SUB218A MAX featurestwo customized 18"LF ferrite drivers ( 4 ^ { \prime \prime } voicecoil) developed for long termusewith high power.The reinforced plywoodenclosureisfitedwithstackingfeettoenablestable groundstacks,andheavydutywheelsforeasytransportation. This BLA active Subwoofer is the perfect match with allthe BLA line Array series.

BLA-SUB218AMAX

System type PowerRatingRMS PowerRatingMAX Frequency response(-10dB) MAXSPL LF Driver Amplifier type Input connectors Output connectors Phase Functions Power Voltage Enclosure Dimensions(WxDxH) Netweight typercontainer 2 0 ^ { \prime } / 4 0 ^ { \prime } / 4 0 ^ { \prime } mathsf { H C }

Dual 18"activesubwoofer
4000W
8000W
32Hz - 150Hz
136dB/142dB(Peak)
2x 18"woofer,4" VC
Class-D
XLR
XLR
Phase select switch
DSP Processor,RS485 Network
AC100V-AC240V
Plywood
1220x720x545mm
83Kg
46/95/112

LINEARRAY

BLA-SUB318AMKII TRIPLE18" POWERED SUBWOOFER High Power-3000W D-Class amplifierwith DSP control - RS485

The BLA-SUB318A MKIl is an active DSP-controlled 3 x 1 8 ^ { \prime \prime } subwoofer.This powered high-performancesubwooferisrecommended for high level touringsystemsand music-clubs. Thanks to its high-power D-class 30ooW amplifier module,it can provide extended and high sound pressure level low frequencies. The DSP control allows for ful control of the operating parameters : Input sensitivity， Low pass filter, Phase switch and built-in delay section for a quick setup of your complete system.

The BLA-SUB318A MKIlfeatures three customized 18"LF ferrite drivers ( 4 ^ { \prime \prime } voice coil) developed for long termusewith high power.Thereinforced plywood enclosureisfitted with stacking feettoenablestable ground stacks,and heavy dutywheelsforeasy transportation This BLAactive Subwoofer is the perfect match with allthe BLA line Array series.

BLA-SUB318AMKII

Cabinet LF Driver Amplifier FreqResp(-3dB) Freq Resp(-10dB) Low-pass filter Phase Audio Processing Line Input Line Output RMS Power MaxPower Power Voltage Max SPL Dimensions(WxDxH) Net Weight(Kg) Qtypercontainer20'/40'/40'HC

Plywood - Paint Box
3 ×18″,4"VC
1000W+1000W+1000WClassDRS485
40Hz-120Hz
35Hz-120Hz
70Hz-120Hz Low-pass filter select switch
Phase switch 0-180°
DSP - 48KHz - 56bits
XLR
XLR
3000W
6000W
AC115V&AC230V
134dB/140dB(Peak)
1400x820x550mm
105.5
30/70/85

CLS SERIES Arrayable Active2 way 12" constant curvature loudspeaker

The CLS12Aisa medium throwloudspeaker designed by the BLG R&D team to provide exceptional performances with flexibility and easy use.
The CLS series isrecognized by itsadaptive dispersion waveguide which can be setup from 7 0 ^ { \circ } to 1 0 0 ^ { \circ } to adapt directivity to the audience geometry.
Designed asa line source system,the CLS12A can also be used individually as a point source system.Finished ina highly durable semi matt black paint, the trapezoidal cabinet is constructed from18mm plywood witha steel mesh grille.
Now available in active version, this new version of CLS Series is powered by a 80oW class-D high-efficiency amplifier controlled by DSP for CLS12A,and 2000W class-D for the CLS-SUB18A. Designed to provide exceptional performance, this new CLS12Aincorporatesa high eficiency12" neodymium customized woofer and a3" compression driver for the HF section.

CLS-12A

CLS-SUB18A

Subwoofer

CLS-SUB18A isa singleactive subwoofer equipped witha high performance 18" ferritedriverhoused inabassreflex enclosure perfectlytuned forultra low frequency response.

Specifications

-1 xHF3"VC driver
-1xadaptive dispersion BLG developed
wave guide
-1 x customized 1 2 ^ { \prime \prime } LF driver
-1x80oWRMSBi-amplifieroperation

Features and Benefits

- 2 way full range
Constant curvature
Combine versatility of a point source with line array
configuration ofup to fourelements
Adaptive waveguide dispersionangle from35° to 1 0 0 ^ { \circ }
- Integral suspension hardware for line arraysetup

System control

The Pro Speaker Management System has been adapted for thisnew CLSsystem.
Thanksto the integrated RS485interface，sound engineercancontrolandadjust CLSsystemperforms beforeand in live during the performance.
Twousingmodesavailable:UsermodeandExpert modewhichallows internal DSP parametersadjustments.
EQ,LIMITER，OUNHECK，ROSSOVER,HASE,a SYSTEM MONITORINGare some of the numerous software functions.

ADAPTIVEHORNDISPERSION

Exceptional deployment flexibility thanks to this new multi-directivity wavequide

Adjust the dispersion angle in a symmetrical or an asymmetrical way.
From 7 0 ^ { \circ } to 1 0 0 ^ { \circ } dispersion setup,with up to 16 possibilities.

Waveguide directivity adjustment (16 possible settings)

100° symmetrical set up

85° asymmetrical set up

70° asymmetrical set up

Ratio vs Angle for 7 0 ^ { \circ } symmetrical seting

CLS-12A

Systemtype PowerRatingRMS PowerRatingMAX Frequency response(-10dB) MAXSPL HFDriver Woofer Amplifier type Inputconnectors Output connectors Functions Power Voltage Enclosure Dimensions(WxDxH) Netweight typercontainer20'/40'/40'HC

12" 2-way with active filter
800W
1600W
65Hz - 18KHz
127dB/133dB(Peak)
4.5" Neodymium,3" VC
1 2 ^ { n } Neodymium,3"VC
Class-D Bi-amp
XLR or1/4Jack
XLR Balanced
DSP Processor,RS485 Network
AC100V-AC240V
plywood
750x405x350mm
26Kg
180/370/440

CLS-SUB18A

System type PowerRatingRMS PowerRatingMAX Frequency response(-10dB) MAXSPL LF Driver Amplifier type Input connectors Outputconnectors Phase Functions Power Voltage Enclosure Dimensions(WxDxH) Netweight typercontainer20'/40'/40'HC

18"activesubwoofer
2000W
4000W
35Hz- 150Hz
130dB/136dB(Peak)
18"woofer,4"VC
Class-D
XLR
XLR
Phaseselectswitch
DSPProcessor,RS485Network
AC100V-AC240V
Plywood
750x590x520mm
45Kg
105/220/260

ULTRA-PORTABLE ACTIVE SPEAKER

Built-in media player - Bluetooth - Tone Adjust

The Aero x isacompact,high-performanceportableloudspeakerdesignedforprofessionalswhoneed power，flexiblityand autonomy in a lightweight format. Built around a 1 0 ^ { \prime \prime } low-frequency driver and an efficient Class-D amplificationsystem,Aero X deliversclearpunchysoundwhetherit'susedforliveperformance,mobileDJsetups,presentations,orsmallevents. Poweredbyadetachablelithium-ionbattryAeroXoferstruemobility.Thebatterycanbeeasilyremovedforreplacementor exteralchargingensuringunnterruptedoperationandlong-terreliabilityinthefield.TismodularapproachmakeseroXideal forrental companiesand touring professionalswho demand fast turnaroundand minimal downtime. TheintegratedDSPprocessorprovidesprecise control over sound performance, including EQ and reverb,while multiple input optionsallowmicroones,instrumentsndline-levesourcestoeconecteditase.Buetoothonctivitddexteibil ityforplayback.Housedinarobustyetcompactenclosure,AeroXcombinesportabilitywithprofessonalaudioperformance makingitaversatilesolutionforanymobilesoundapplication

Type Woofer Mic Micor Instrument Input Line In Aux In Line out Amplifier Frequency Response(-10dB) RMS Power MAXPower MAXSPL Battery Play time Voltage Dimensions(WxDxH) Netweight(kg) Qtypercontainer20'/40'/40'HC

Aero X

ULTRA-PORTABLEACTVE SPEAKER

Built-in media player - Bluetooth - Tone Adjust

Bring your speaker everywhere!- You are a DJ, a guitarist, a singer, this ultra portable speaker will be your best partner ever. Easy to carry,lightweight, the T1Max isa rechargeable lithium-ion battery speaker which keeps you going for up to 9 hours.The Tone Preset adjusts automatically for best sound you need.Thanks to its multi-angle cabinet, you can place it in any position: on the ground,angled as a stage monitor or on a pole.With a built-in 3 channels mixer，reverb, Bluetooth streaming,and tone adjust function, the T1 Max is the ultimate all-in-one PA speaker.

Type LF HF Micor Instrument Input EQ Line In Aux In Line out Amplifier Frequency Range(-10dB) RMS Power MAXPower MAX SPL Battery Power Voltage Dimensions(WxDxH) Netweight(kg) Qtypercontainer20'/40'/40'HC

T1Max-MKII

2-way Configuration WithActive Filter
10"x1，1.5"VC
3"x4NeodymiumFull RangeSpeaker
XLR or 1/4" TRS (2-Way)
80Hz，12kHz
XLR or 1/4" TRS
1/8" TRS
1/4" TRS
ClassD,pocesor,verb
Bluetooth, USB input, USB charging
55Hz-20KHz
150W
300W
116dB/122dB(Peak)
18.5V/5.2AH (Lithium - ion)
AC100V-AC240V
344x363x473mm
12.5
290/620/720

ULTRA-PORTABLEACTIVE SPEAKER

Built-in media player - Bluetooth - Tone Adjust

Bring your speaker everywhere!- You are a DJ,a guitarist, a singer, this ultra portable speaker will be your best partner ever. Easy to carry,lightweight, the T1 Mini isa rechargeable lithium-ion battery speaker which keeps you going for up to 9 hours. The Tone Preset adjusts automatically for best sound you need.Thanks to its multi-angle cabinet, you can place it inany position: on the ground,angled as a stage monitor oron a pole.With a built-in 3 channels mixer，reverb, Bluetooth streaming,and tone adjust function, the T1 Mini is the ultimate all-in-one PA speaker.

T1Mini-MKIl

Type Woofer Mic or Instrument Input Line In Aux In Line Out Amplifier

2-way Configuration With Active Filter
6.5" Coaxial Speaker
XLR or 1/4" TRS (2-Way)
XLR or 1/4" TRS
1/8" TRS
1/4" TRS
ClassD, processor,erb
stereo Bluetooth, USB input, USB charging
55Hz-20KHz
100W
200W
114dB/120dB(Peak)
14.4V/5.2AH (Lithium - ion)
AC100V-AC240V
248x284x332mm
6.25
730/1455/1700

Frequency Range(-10dB) RMSPower MAX Power MAX SPL Battery Power Voltage Dimensions(WxDxH) Net weight(kg) Qtypercontainer20'/40'/40'HC

10" WIRELESS PA SYSTEM

High Capacity Battery-Double UHF wireless

BR-10 mixes professonal acoustic performance with the most versatility of a complete portable PA equipped with a 2 channels UHF wireless microphone system,a media playerwith stereo Bluetooth, USB portand complete mixer including echo,talk-over, EQ functions and much more. The system is equipped with one 1 0 ^ { 1 1 } woofer and a 1.35" voice coil Titanium driver.Its sturdy and compact cabinet isequipped with wheels and retractable handle.Professional acoustic performance on the move!Up to5 hours of

with2UHF microphones

BR-10

2-way Configuration With Active Filter
3.5",1.35"VC
10″,1.5"VC
2 WAY UHFWIRELESS
(Infrared automaticallyto frequency)
XLR or 1/4"Jack (2-way)
RCA,XLR, 1/4"Jack or 3.5mm Jack
2band EQ with echo processor talk over
RCA
CLASS D BI-AMPLIFIER USB,MP3,
Stereo Bluetooth
50Hz-20KHz
100W
200W
116dB/122dB(Peak)
AC100V-AC240V
12V/7.5AH
360x345x560mm
16
atleast5 hoursatmaximal volume
260/545/640

BR-10L

2-way Configuration With Active Filter
3.2",1" VC
10″,1.5"VC
2 WAYUHF WIRELESS
(Infraredautomaticallytofrequency)
XLR or 1/4"Jack (2-way)
RCA or3.5mm Jack
2band EQ with echo processor talk over
RCA
CLASSDBI-AMPLIFIERUSB,MP3
Stereo Bluetooth
50Hz-20KHz
100W
200W
116dB/122dB(Peak)
AC100V-AC240V
12V/7.5AH
360x345x560mm
16
at least 5 hoursat maximal volume
260/545/640

M-FIVE,M-FIVE+,M-SIX,M-SIX+ andM-SUB1OWITHDSP

Self-Powered - DSP controlled -Digital EQ

The newM-series studiomonitor is designed for useasa near-field loudspeaker. Engineered to thehighest sonicstandards,M-series monitors addressthe needs of professional usersin recording,broadcast,miing,masteringandpost-production.Thedrivers,alldevelopedbyBG,have beenadaptedtooneotherusingacousticsimulationandalargeseriesofmeasurements.Thanks toitsnewwaveguide design,and totheacousticscontrolsfor bass,low-midand high frequencies, the M-series bring a new bench-mark in audio reproduction quality.Two versions are available:M5and M6 with wide range of bass,midand trebleacoustic switch controlsand M5+ / M6+ carrying built-in DSP with large LCD display. Both versions are developed to be used in diverse acoustical conditions,withany source equipment.

10"activesubwooferavailable

Anincrediblyversatile monitor DSPsoftware.DSP-driven Graphic EQwith25settingshelp fora transparent reproduc tion witha wide usable listening area.

Digital volume control，graphic EQ，parametric EQwith H-SHELF, H-PEQ are allfor your mixing taste. Backlight, \angle C D display contrast,standbymodeare also controlled with this new DSP interface. Thisnew M-seriesis equipped with distortion-free highefficiencyclass-Damplifiers.Exclusively developedby BLG engineering team for thisnew M-series, thisnewdigitalamplificationcombinedwithanadvanced electronic processing bring tothisnewM-seriesagreater dynamic rangeand low-frequency extensionand a perfect advantage of the drivers capabilities.

Alsoavailable in this M-series, the M-SUB10. Perfectly designed to complement ourextensive range of monitors, thisnew active subwoofer equipped with a robust 1 0 ^ { \prime \prime } driverbringsanaccurateand distortion-free low frequency reproduction.

M-6 frequency response

VOLUME
-11dB PRESSBUTTONFORMENU
BACK EQ SETUP
HIGH EQ 1- H-SHELF -2dB 10KHz
2-H-SHELF-1dB 10KHz H-PEQ -1dB3.5KHz 3- H-SHELF +1dB 10KHz H-PEQ +1dB 3.5KHz 4- H-SHELF +2dB 10KHz 5-FLAT

M-FIVE

M-SUB10

HF LF Frequency Range Line Input Line Output LED AMP Treble Boost Low-Mid Boost Low Boost LCD EQ X-OVER Phase RMS Power Power Voltage Dimensions(WxDxH) Net Weight(Kg)

M-FIVE+ M-SIX
1" Neodymium Soft Dome 1" Neodymium Soft Dome
5" Paper Cone Rubber Edge 6.5" Paper Cone Rubber Edge
48Hz -20kHz 45Hz - 20kHz
XLR&1/4"TRS XLR&1/4" TRS ---
Front LED Control Front LED Control
Built-in efficient Class Dpower amp Built-inefficient Class Dpoweramp -2dB,-1dB,0dB,1dB @Hz -2dB,-1dB,dB,dB@H -2dB,-1dB,0dB,1dB @60Hz
Onboard LCD visual DSP-driven EQ ==
25 visual Graphic EQsettings --
fordifferent environments --
80W 120W
AC100V-AC240V AC100V-AC240V
185x250x300mm 225x287x360mm
4.65 6.25
1" Neodymium Soft Dome
5" Paper Cone Rubber Edge
48Hz- 20kHz
XLR&1/4"" TRS
---
Front LED Control
Built-in efficient ClassDpoweramp
-2dB，-1dB，dB，dB@Hz
-2dB，-1dB,dB，dB@H
-2dB，-1dB，dB，dB@6H
=
---
---
---
80W
AC100V-AC240V
185x248x300mm
4.65
M-SIX+
1" Neodymium Soft Dome
6.5" Paper Cone Rubber Edge
45Hz - 20kHz
XLR&1/4" TRS
---
Front LED Control
Built-in efficient Class D power amp
---
--
Onboard LCD visual DSP-driven EQ
25 visual Graphic EQ settings
fordifferentenvironments
--
---
120W
AC100V-AC240V
225x289x360mmmm
6.25
1 0 ^ { \dprime } Paper Cone Rubber Edge
40Hz - 150Hz
XLR&1/4" TRS
XLR
-
Built-in efficient ClassDpoweramp
---
.-
70Hz,80Hz,90Hz,100Hz
0/180°
250W
AC120V&AC230V
350x390x372mm
14

BLE5A / BLE6A Active Bluetooth Installation Speakers

TheBLE5Aand6Aaecompactactiveallmountspeakersdesignedfofixdinstalltionsrequingearsoundsimpeupnd wirelessflexibility.Eachmodelfeaturesa built-in Class-DamplifierwithBluetoothconnectivityandauxiliarynput. AsingleBluetoothmasterspeakercanwireleslycontrolanddriveuptounlimitedBluetoothslavespeakers,makingmulti-speakerin stall-tionsfstandfetitoutomplexablingithidfrequencyresposeigpeformanceandiversalpowpl the BLE5Aand BLE6A are ideal for retail spaces,restaurants,bars,and commercial environments.

Wireless Multi-connection Unlimited slave speakers Up to 20m distance betweenspeakers

BLE5A

Type Power(RMS) Power (Max) Frequency Response(-10dB) MaxSPL(Peak) Amplifier:ClassD,Bluetooth Function Aux Input Voltage (foractive version Dimensions(with Bracket) Weight(kg) Qty per container20'/40'/40'HC

5.25" active Wall-mount Installation Speaker
40W
80W
80Hz-20KHz
112dB
Class D, Bluetooth
multiplespeaker interconnections
(in Bluetoothand Auxiliary input state)
3.5mmJack
100-240V AC50/60Hz
170x282x365mm
3
1040/2120/2520

BLE6A

6.5" active Wall-mount Installation Speakel
60W
120W
65Hz-20KHz
116dB
Class D, Bluetooth
multiplespeaker interconnections
(in Bluetooth and Auxiliary input state)
3.5mm Jack
100-240V AC50/60Hz
196x300x330mm
4.2
940/1940/2280

INSTALLATION

Activeversionwithbuilt-in Bluetooth receiver. Thisactive speaker canalso powera passive speaker.

CSP CEILING SPEAKERS

Elegant -Active & Bluetooth

CSP series includes three size ceiling speakers equipped with 4 ^ { \prime \prime } , 5 ^ { \prime \prime } and 6.5" woofer and rotation high definition tweeter.Withanelegant designanda wide dispersion angle,the new CSP series has been designed and developed for commercial audio and back ground musicapplications. They can be used with constant voltage line 70v or100v but the complete CSP seriesisalsoavailable in low impedance version (8 ohms)with and without rear enclosure,and powered version with built-in Bluetooth receiver.Molded in high resistant ABS plasticandavailable inwhiteand black colors, the CSP series features a quick lock system with a rotating screw clamps hidden behind the grille for an easy and quick mounting.

Type Power(RMS) Power (Max.) Freq. Response Max SPL(PEAK) Amplifier Input connector
Voltage (foractiveversion) Dimensions(with Bracket) Mountingdiameter Weight(Kg)
typercontainer20'/40'/40'HC
CSP-4AL
Active 2-way
20W+20W
40W+40W
90Hz-18KHz
112dB
Class D, Bluetooth
RCA/Euroblock
Poweradapt.AC/DC20V
175x175x105mm
145mm
1.2
5200/10720/12480
CSP-5AL
Active 2-way
25W+25W
50W+50W
80Hz-18KHz
114dB
Class D, Bluetooth
RCA/Euroblock
Poweradapt.AC/DC24V
214x214x113mm
178mm
1.5
3190/6390/7455
CSP-6AL
Active 2-way
40W+40W
80W+80W
70Hz-18KHz
117dB
Class D, Bluetooth
RCA/Euroblock
Poweradapt.AC/DC28V
245x245x130mm
211mm
2
2400/4960/5760

Pivoting tweeter

CSP CEILING SPEAKERS Elegant-Transformer

CSP series includes three size ceiling speakers equipped with 4 ^ { \prime \prime } , 5 ^ { \prime \prime } and 6.5" woofer and rotation high definition tweeter.Withanelegant designanda wide dispersion angle,the new CSP series has been designed and developed for commercial audio and back ground musicapplications.They can be used with constant voltage line 70v or100v but the complete CSP series isalsoavailable in low impedance version (8 ohms)withand without rear enclosure,and powered versionwithbuilt-in Bluetooth receiver.Molded in high resistant ABS plasticand available inwhiteand black colors, the CSP series features a quick lock system with a rotating screw clamps hidden behind the grille for an easy and quick mounting.

Optional70Vor100V linetranstormer

Optional70Vor100V linetransformer

CSP-4TL
70-100V line
7.5W/15W
15W/30W
90Hz-18KHz
111dB
Push connector
175x175x105mm
145mm
1.5
5200/10720/12480

Type Power(70V) Power(100V) Freq.Response MaxSPL(PEAK) Inputconnector Dimensions(with Bracket) Mountingdiameter Weight(Kg) Qtypercontainer20'/40'/40'HC

CSP-5TL
70-100Vline
7.5W/15W
15W/30W
80Hz-18KHz
112dB
Push connector
214x214x113mm
178mm
1.8
3190/6390/7455
CSP-6TL
70-100Vline
10W/20W
20W/40W
70Hz-18KHz
114dB
Push connector
245x245x130mm
211mm
2.3
2400/4960/5760

Optional70Vor100V linetransformer

Pivoting tweeter

WSP WALL-MOUNT INSTALLATION SPEAKERS Elegant design - Active Not only forhigh performance background music,but also asa main music system, from 4 ^ { \prime \prime } woofer to 8 ^ { \prime \prime } woofer，thisnewWSPserieswil WSP-4AL WSP-6AL surprise you!Veryelegantdesign,high sound definitionandwide WSP-5AL WSP-8AL dispersion, the WSP series is the speaker series for all your installation applications.Bar,club,itness center,shop,boutique,café&rest terrace,black orwhite,passive,active orIP54 version,you willins WSPseriesspeakerseverywhere.All the featuresexpected fc level installation speakersare included: Euroblock connectors,lowand 面 high impedance inputs, Stand-by mode,input level adjustment,strong designed bracket and much more. WSP-4AL WSP-5AL WSP-6AL WSP-8AL Type Active Active Active Active Power (RMS) 40W 40W 60W 60W Power (Max.) 80W 80W 120W 120W COA \*Awhitvailable Freq. Response 90Hz-20KHz 80Hz-20KHz 65Hz-20KHz 60Hz-20KHz Max SPL(PEAK) 112dB 113dB 116dB 117dB Amplifier Class D Class D Class D Class D Input connector Euroblock/ RCA Euroblock/ RCA Euroblock/ RCA Euroblock/RCA Voltage (for active version) 100-240VAC/50-60Hz 100-240VAC/50-60Hz 100-240VAC/50-60Hz 100-240VA0 100-240VAC/50-60Hz
Poweredversionwith
standby function,low Dimensions (with Bracket) 145x247x295mm 170x282x365mm 196x300x330mm 240x335x390mm
and high impedance Weight(kg) 2.5 3 4.2 4.8
inputs. Qty per container 2 0 ^ { \prime } / 4 0 ^ { \prime } / 4 0 ^ { \prime } / / \mathsf { I C } 号 1600/3280/3840 1040/2120/2520 940/1940/2280 640/1345/1560

can link out to passive speaker

CEILING-MOUNTMINIARRAY

Unique Design - No visible cable - Compact

Innovativeinvisibleconnexion No visiblecable

This new ceiling speaker are designed to provide high sound performanceinadiscreteanduniguedesign.Not just for background music, this mini array system can be used and installed as main sound system. Special metal top holder hiding the signal connectors,and special sides connectors givea very elegant design to this speaker system.Each LSP-4A module featuresa high performance 4 ^ { \prime \prime } wooferand twoangled1"silktweetersforextrawidesounddispersion and clarity. Built-in Class-D amplifier,and Bluetooth function.

LSP-4A

Type HF Driver LFDriver Frequency Range Line In Line out Link out Amplifier Rated Power MaxPower Sensitivity MAX SPL lominalimpendance Connectors

Ceiling installationMiniarrayactivespeaker
8x1" DRIVER,0.8"VC
4 ×4",1"VC
80Hz-20KHz
RCA or Euroblock
RCA
Can Link out to passive speaker
Amplifier: ClassD,Bluetooth
2x120W
2x240W
93dB(1W/1m)
120dB/126dB (Peak)
4OHM
AC100V-AC240V
210x170x553mm
6.5
620/1300/1520
LSP-4
Ceiling installation Miniarray passivespeake
8x1" DRIVER,0.8"VC
4x4",1"V
80Hz-20KHz
--
---
---
120W
240W
93dB(1W/1m)
114dB/120dB (Peak)
4OHM
Side connectors(+push connectors
inthe top holdermodule)
---
210x170x553mm
6
620/1300/1520

Innovativesidesconnectors.

Power Voltage Dimensions(WxDxH) Net Weight(Kg) Qtypercontainer20'/40'/40'HC

INSTALLATIONWALL-MOUNT ACTIVESUBWOOFER

Compact -Descrete-Self powered

TheSUB-8A hasbeen designedand developed foranyapplication needing low frequencyreinforcement. Idealcomplement to CSP, WSPand LSP series,theSUB-8ASUB featuresa8"Woofer together witha built-in powerful amplifier for reachanddeepbass.All the featuresexpected forsuch installationspeakerareavailable:X-over frequency， Phase switch，Auto Power( Stand-by)，Lineinput, balanced inputwith Euroblock connector or XLR connector. Thanks to 2 metal brackets, the SUB-8A can be directly positioned on the wall or fixed on ceiling.

SUB-8A

LF Driver Amplifier FREQ RESP Low-pass filter Functions/Controls Line In Amp.Power MaxPower MAX SPL Power Voltage Dimensions(WxDxH) Netweight Qtypercontainer20'/40'/40'HC

8" woofer,1.4" VC
CLASS D
50Hz-120Hz
Low-pass filter selectswitch
Phase select switch,input level,Low-pass,Stand-by(Auto power)
XLR or 1/4"Jack, RCA, Euroblock BALANCED INPUT
120WRMS
240W
113dB/119dB (Peak)
AC100V-AC240V
445x160x400mm
8kg
460/960/1120

INSTALLATIONWALL-MOUNTMULTI-CHANNELSZONEAMPLIFIER

Bluetooth - USB - FM radio - 4 Zones -5inputsMic/Line-AB-classamplifier

One more unique design from the BLG engineer team. This elegant design wall-mountamplifieris1oo%dedicated to installationapplications.Restaurant,bar,fitnesscenter,boutique.

This isthe perfectamplifierdesired fromallintegratorsand installers.All in oneamplifier. ThisM-Four amplifier features four powerful AB-classamplifiersable to handle 4 zones separately，abuilt-in mixerwith5 channels independentvolume control,anda USB/BluetoothandFMradio player. Speciallydesignedtobeeasily integrated intoanycommercial installation, thisM-Four features intuitive controls for daily use,and more inside audio controlsonlyaccessible by professional installer.

M-FOUR

Installationmulti channelsamplifier
4x AB-Class80W RMS @4Ω
35dB/2KΩ
3dB/20KΩ
+3dB
Low&High :+/- 12dB
Level per channel/ Low&High for each output/USB/FM/Bluetooth player
AC115VorAC230V
180W
384x95x474mm
8
620/1260/1500

Mic Input Line Input Line Output EQ Functions/controls Power Voltage Powerconsumption Dimensions(WxDxH) Net weight(kg) Qtypercontainer20'/40'/40'HC

AMPLIFIER

MULT-CHANNELSZONEAMPLIFIER

Bluetooth - USB - AB- classamplifier

The BZ mixing amplifier is designed specifically for fixed audio installations.The BZ-1060 comes with one output channel,while the BZ-2060 is equipped withtwo outputs. Each output channel supports 4audio inputs,and allinputsare fitted with independent gain controls, compatible with both low-impedance and 70v/100V constant-voltage output modes.Additionally, the amplifier allows for remote volume adjustment viatheREM-Vcontrol module

BZ-1060

Output power Numberof input channels Number of output channels Tone Control Input sensitivity Frequency Response

60Wx1
4
1
Bass+/-12dB@100Hz Treble+/-12dB@10KHz
Lineinput1.1vRCAinput250mv
4OHMOutput20Hz-20KHz,+/-3dB
70V/100VOutput50Hz-15KHz,+/-3dB
0.5%,20Hz-20KHz
77dB
110V or220V AC50/60Hz
4Ω
80Ω,40Ω,20Ω
160Ω,80Ω,40Ω
225x378x50mm
4.6
1800/3700/4400

Toal Harmonic Distortion(THD1W) Signal-to-noise ratio Voltage Operating Impedance LOW impedance Output 70Voutput 100V output Dimensions (WxHxD) Weight(kg) Qtypercontainer20'/40'/40'HC

BZ-1060

BZ-2060

BZ-2060

REM-V control module.

60Wx2
4
2
Bass + 1 - 1 2dB@100Hz Treble+/-12dB@10KHz
Lineinput1.1vRCAinput250mv
4OHM Output20Hz-20KHz,+/-3dB
70V/100VOutput50Hz-15KHz,+/-3dB
0.5%，20Hz-20KHz
77dB
110Vor220V AC50/60Hz
4Ω
80Ω,40Ω,20Ω
160Ω,80Ω,4Ω
225x378x50mm
6.4
1800/3700/4400

Output power Number of inputchannels Number of output channels Tone Control Input sensitivity Frequency Response Toal Harmonic Distortion(THD1W) Signal-to-noiseratio Voltage Operating Impedance LOW impedance Output 70V output 100Voutput Dimensions (WxHxD) Weight(kg) Qtypercontainer20'/40'/40'HC

BD \mathsf { D } -CLASS P \bigcirc WERAMPLIFIER

1.Small size,light weight, wide supply voltage, can be adapted to power around the world.
2.Input modeof Stereo,parallel and bridge canbe selected tomeet different needs 3.With dynamicmulti-stage LED signal display,the amplitude ofthe signal output is clear to see.
4.Set3OHz/5oHz low-pass filter, select different filter according to the needs, filter out unwanted infrasonic and reduce useless power consumption to protect the speaker effectively.
5. The output signal crescendo control can avoid the audio signal sudden come out to create unpleasant feeling to the ear when output volume becomes after the unit be turned onand worknormally
6.When detect output signal to clip, the linear limiter of input signal willcontrol input signal to reduce the damage on the speaker by the distortion caused by clipping the signal,reducing the heat on amplifier, so you can enjoya safe use.
7.The output amplitude can be controlled automatically by temperature limiter and limiting technique,when theunitwiththehigh temperatureafterlong overload continuousoperationand overasubstantialcontinuoussinewave input.
8.Perfect protection functions,including DC protection, output short circuit protection, thermal protection,power-on soft start protection.
9.Fourcolorsfor option:silver,gold,blackand red
BD-1600D
2x280W
2x500W
2x800W
1000W
1600W
≥102dB
20Hz-20KHz(±1.5dB)
≥65dB
AC100V-240V 50/60Hz
200
44x483x280(mm)
4.5kg
1280/2600/3040

8ΩStereoPower 4ΩStereo Power 2ΩStereo Power 8Ω Bridged Mono Power 4ΩBridgedMonoPower S/N Ratio(A weighted) Frequency Range Input CMRR (1kHz) StandardPower Supply Damping Factor Dimensions NetWeight Qtypercontainer20'/40'/40'HC

BD-2200D
2x400W
2x700W
2x1200W
1400W
2200W
≥105dB
20Hz-20KHz(±1.5dB)
≥65dB
AC100V-240V50/60Hz
200
44x483x280(mm)
4.5kg
1280/2600/3040
BD-2800D
2x800W
2 x 1400W
2 x 1400W
2800W
2800W
≥105dB
20Hz-20KHz(±1.5dB)
≥65dB
AC 100V-240V 50/60Hz
250
44x483x280(mm)
5kg
1280/2600/3040

BPH-CLASS P \bigcirc WERAMPLIFIER

1.Integrated steel structure,multi-function input interface to facilitate mating,strong powerful output and drive capability.
2. Multi-function output selection mode, two-channel stereo mode,and parallel mode and bridge mode,which help to meet different use.
3. 41 step signal gaincontrol matching four LEDsignal dynamic display,you can easilysee theamplitude of the signal output.
4.30 Hz/5O Hz low pass filter can protect speaker effectively by select different filter according to need and filter useless sub-sonic to reduce useless power consumption.
5. Unique two-channel 100 Hz high frequency/ low frequency-selective filter (-24dB/octave) can drivetheseparate ultra wooferconvenientlyand directly,or drivesound reinforcement system that needsultra-lowspeakerandall rangespeaker.
6.Thelinearlimiter of the input signal,when detect output signal start to clip,the limiter controls input signal to reduce the distortion caused by the clipped signal and the damage to the speaker effectively, reducing the heat on amplifier,so you can enjoy a safe use.
7.Perfect protection functions,including direct-current protection, output short circuit protection, radiator and transformers overheating protection, power-on soft start protection,allprotection are displayed on LED panel.
8.Stepless speed control systemcan detect the working temperature automaticaly. It canadjust the fan speed accordinq to the temperature,and the ducted coolinq system let the air flow throuqh the

radiator enhance the cooling effect,avoiding malfunction caused by the smoke and dust pollution dropped on the board and keeping the unit working long hours under normal temperature.

8ΩStereoPower 4ΩStereoPower 2Ω Stereo Power 8ΩBridgedMonoPower 4ΩBridgedMono Power Frequency Range Damping Factor(1KHz/8Ω) Input CMRR(1kHz) S/N Ratio(A weighted) Dimensions Net Weight Qtypercontainer 2 0 ^ { \prime } / 4 0 ^ { \prime } / 4 0 ^ { \prime } mathsf { H C }

BP1000
2x350W
2x500W
2x700W
1000W
1400W
20Hz-20KHz(+0/-0.3dB)
>200
>60dB
≥102dB
89x483×386(mm)
16kg
540/1080/1280
BP1600
2x500W
2x800W
2x1000W
1600W
2000W
20Hz-20KHz(+0/-0.3dB)
>300
>60dB
≥105dB
89x483x419(mm)
20kg
500/1000/1200

? BLG

Connect with us www.blgaudio.com blgaudio_official