AMPLIFIERSAF300

SAF600P

Rated power model

Peak constant power model

Key Parameters

Two channel output class D amplifier IC

IC power supply voltage:

≤± 60V (without radiator)

Overcurrent/over temperature/undervoltage protection

automatic recovery function after protection

Output power:

single end output 120W/4 Ω/THD+N ≤ 1%

Bridge output 250W/8 Ω/THD+N ≤ 1%

THD+N:

≤ 0.03%/1KHZ/1W/4 Ω

IC power supply voltage:

≤± 40V

Single channel output class AB amplifier IC

Output power:

45W/8 Ω/THD+N ≤ 1%

THD+N:

≤ 0.02%/1KHZ/1W/8 Ω

Short circuit/over temperature protection

Residual noise

250uVrms

Wide voltage

100-240V

Amplifier module size

200 X 100 X 45MM

Supply voltage

± 15V, 3.3V

Speaker Control Panel Power Amplifier Module

The SAF300/SAF600P is a fully integrated audio amplifier, including a universal power supply ± 15V,+3.3V output. TDA7294 is

used for treble power amplification, which has a maximum distortion of 45W less than 1% under 8Ω load. MA533A's latest

amplifier chip is used for bass amplifier, and the distortion is less than 1% when the bridge output power is 280W/8Ω. In addition

to excellent audio performance and power, it also has temperature, voltage, and current output monitoring and protection, It is

very suitable for 2-way speaker. Two modules can be used to form a 2-way stereo speaker.

Security certification

Innovation

Applicable speaker type

Self powered PA speaker

2-way column speakers

Stereo amplifier

(two pieces are required to be used at the same time)

Applicable transducer specifications

Power of non pressurized limiter of single amplifier

Treble: 45W/8Ω / THD+N ≤ 1%

Bass: 250W/8Ω / THD+N ≤ 1%

The output power after the lower

voltage limit of the speaker size

(the voltage limit is adjustable)

Treble

34 core 8Ω: 40W

44 core 8Ω: 40W

44 core 8Ω: 40W

44 core 8Ω: 40W

Bass

8 inch 8Ω: 100W

10 inch 8Ω: 115W

12 inch 8Ω: 120W

15 inch 8Ω: 125W

Front panel function

Two channel balanced/unbalanced input

Independent limited volume adjustment for each channel

Built in FULL RANGE, FLAT, MONITOR, MONITOR HPF

kinds of EQ curve limits

Built in independent voltage limit adjustment

Built in 4 kinds of music modes

Adopt ADI DSP processing chip

Amplifier module+pre-processor

AMPLIFIERSAF250

SAF500P

The SAF250/SAF500P is a fully integrated audio

amplifier, including ± 15V and 5V outputs of the

general power supply. The high and low frequency

amplifier is amplified by the latest MA533A

amplifier chip. The distortion of the bridge output

power is less than 1% when the output power is

280W/8Ω . In addition to excellent audio

performance and power, it also has temperature,

voltage, and current output monitoring and

protection, which is very suitable for the 2-way

speaker. Two modules can be used to form a

2-way stereo speaker.

Key Parameters

Rated power model

Peak constant power model

Two channel output class D amplifier IC

THD+N:

≤ 0.03%/1KHZ/1W/4 Ω

Overcurrent/over temperature/undervoltage protection

automatic recovery function after protection

Output power:

Single end output 120W/4 Ω/THD+N ≤ 1%

Bridge output 250W/8 Ω/THD+N ≤ 1%

Supply voltage of pre part:

± 15V, 5V

Residual noise

250uVrms

Wide voltage

100-240V

Amplifier module size

185 X 105 X 42MM

Supply voltage of pre part

± 15V, 5V

Innovation

Speaker Control Panel Power Amplifier Module

Security certification

Two channel balanced/unbalanced input

Independent limited/MIC volume adjustment for each channel

3Limited or MIC input switch

2 * RCA stereo input

RCA independent volume control

Bluetooth on switch

Stereo Bluetooth link support

EQ treble volume adjustment

EQ bass volume adjustment

Total volume adjustment

Power supply and voltage limit indicator

Applicable speaker type

Self powered PA speaker 2-way column speakers Stereo amplifier

(two pieces are required to be used at the same time)

Applicable transducer specifications

Power of non pressurized limiter of single amplifier

Treble: 120W/4Ω / THD+N ≤ 1%

Bass: 120W/4Ω / THD+N ≤ 1%

The output power after the lower voltage limit of the speaker size

(the voltage limit is adjustable)

Treble: 2.5 inch*6 4Ω / 58W Power

Bass: 8 inch 8Ω / 90W Power

Front panel function

Amplifier module+pre-processor

AMPLIFIERThe SAF120/SAF240P is a fully integrated audio amplifier, including ± 15V,+5V,+48V outputs of general power supply. The

amplifier chip uses TDA8920, and the power can reach 125W/6 Ω with less than 1% distortion. In addition to excellent

audio performance and power, it also has temperature, voltage, and current output monitoring and protection, which is

very suitable for single speaker design.

Innovation

SAF120

SAF240P

Rated power model

Peak constant power model

Speaker Control Panel Power Amplifier Module

Applicable speaker type

Multimedia speaker

Radiator has a variety of sizes and specifications

Key Parameters

Amplifier power:

125W (THD+N ≤ 1%)

Applicable to global wide voltage power supply:

AC100-240V/50-60Hz

Input sensitivity:

+0dBu

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

253mm X 75.8mm X 55mm

Local protection:

DC protection

short circuit protection

overheating protection

input overload protection

output overload protection

Security certification

Monitor speaker

Applicable transducer specifications

The output power after the lower voltage limit of the speaker size

(the voltage limit is adjustable)

5 inch 6Ω Full-range speaker/ 120W

Independent 3-band EQ high, medium and low adjustment, Adjustment range: ±15dB

Level adjustment of independent CD IN and AUX IN input signals

Configure independent CD IN and AUX IN input interfaces

Independent two-way MIC or limited input interfaces

Have two independent MIC or limited input level adjustment potentiometers

The delay time of the built-in delay device can be adjusted

Configure the delay on/off switch

Configure the INSTRUMENT key to optimize the unbalanced instrument signal input at the MIC/LINE terminal

Support the capacitive microphone, Independent phantom power switch and phantom power indicator

Total volume adjustment

Power and voltage limit indicator

Front panel function

Amplifier module+pre-processor

SAF1000

SAF2000P

Rated power model

Peak constant power model

AMPLIFIERThe SAF1000/SAF2000P is designed with discrete driver chip and discrete amplifier tube, including ± 15V and 5V output of

general power supply. The amplifier driver chip uses stable IR20957, and the amplifier tube uses IRFB4227. The distortion of this

machine is less than 1% when the bridge output power is 1200W/8Ω. In addition to excellent audio performance and power, it also

has temperature, voltage and current output monitoring and protection, which is very suitable for design as a subwoofer. It can be

designed as a stereo speaker through non bridge mode.

Innovation

Speaker Control Panel Power Amplifier Module

Key Parameters

Amplifier output:

1200W/8Ω

Input voltage:

AC230V/50-60Hz or AC115V/50-60Hz

Input sensitivity:

+0dBu

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

236mm X 131mm X 68mm

Security certification

Independent two channel volume adjustment

Support LINE/MIC selection

One high impedance 6.35 socket input

DSP setting and adjustment parameters

Independent RCA stereo input

Support MIX mixed output

Independent subwoofer adjustment

Two independent LINE LINK signal output

Two independent balanced unbalanced signal input

Support LCD display

Power supply and voltage limit indicator

Applicable speaker type

Self powered PA speaker

Linear array speaker

Front panel function

Applicable transducer specifications

The output power after the lower voltage limit of the speaker size

(the voltage limit is adjustable)

Treble: 8 inch * 3 4Ω / 500W

Bass: 15 inch 4Ω / 500W

Amplifier module+pre-processor

AMPLIFIERThe SAF310/SAF620P is a fully integrated audio amplifier, including ± 15V and 5V outputs from the general power supply.

TDA7294 is used for the treble power amplification, which has a maximum distortion of 70W less than 1% when the load is 8 Ω.

The bass amplifier uses the latest MA533A amplifier chip, and the distortion of this machine is less than 1% when the bridge

output power is 280W/8 Ω. In addition to the excellent audio performance and power, it also has the monitoring and protection

of the output temperature, voltage, and current, It is very suitable for 2-way speaker. Two modules can be used to form a 2-way

stereo speaker.

SAF310

Rated power model

SAF620P

Peak constant power model

Speaker Control Panel + Power Amplifier Module

Innovation

Security certification

Radiator has a variety of sizes and specifications

Key Parameters

Treble channel output:

≥ 50W/8 Ω (THD+N ≤ 1%)

Applicable to global wide voltage power supply:

AC100-240V/50-60Hz

Bass channel output (BTL):

≥ 250W/8 Ω bass output (THD+N ≤ 1%)

Frequency response:

20~20KHz ± 3dB

Switch mute:

no annoying click

Supply voltage of pre part:

± 15V, 5V

Amplifier module size (excluding radiator):

180mm X 90mm X 50mm

Height:

≥ 50mm

Applicable speaker type

Self powered PA speaker

2-way column speakers

Stereo amplifier

(two pieces are required to be used at the same time)

Applicable transducer specifications

Radiator has a variety of sizes and specifications

Treble: 53W/8Ω / THD+N ≤ 1%

Bass: 260W/8Ω / THD+N ≤ 1%

The output power after the lower voltage limit of the speaker size

(the voltage limit is adjustable)

Treble: 34 core,8Ω / 17W Output power configuration

Bass: 12 inch,8Ω / 105W Power

Two channel balanced/unbalanced input

Independent limited/MIC volume adjustment for each channel

3Limited or MIC input switch

2 * RCA stereo input

RCA independent volume control

Bluetooth on switch

Stereo Bluetooth link support

EQ treble volume adjustment

EQ bass volume adjustment

Total volume adjustment

Power supply and voltage limit indicator

Front panel function

Amplifier module+pre-processor

SAF320

Rated power model

SAF650P

Peak constant power model

The SAF320/SAF650P is a fully integrated audio amplifier, including ± 15V and 5V outputs from the general power supply.

TDA7294 is used for treble power amplification, which has a maximum distortion of 70W less than 1% under an 8Ω load.

MA533A is used as the latest amplifier chip for bass power amplification. The distortion is less than 1% when the bridge

output power is 280W/8Ω. In addition to excellent audio performance and power, it also has temperature, voltage and current

output monitoring and protection, It is very suitable for 2-way speaker. Two modules can be used to form a 2-way stereo

speaker.

Innovation

Speaker Control Panel + Power Amplifier Module

AMPLIFIER

Radiator has a variety of sizes and specifications

Key Parameters

Treble channel output:

≥ 50W/8 Ω (THD+N ≤ 1%)

Applicable to global wide voltage power supply:

AC100-240V/50-60Hz

Bass channel output (BTL):

≥ 250W/8 Ω bass output (THD+N ≤ 1%)

Frequency response:

20~20KHz ± 3dB

Switch mute:

no annoying click

Supply voltage of pre part:

± 15V, 5V

Amplifier module size (excluding radiator):

180mm X 90mm X 50mm

Height:

≥ 50mm

Security certification

Applicable speaker type

Self powered PA speaker

2-way column speakers

Stereo amplifier

(two pieces are required to be used at the same time)

Applicable transducer specifications

Power of non pressurized limiter of single amplifier

Treble: 120W/4Ω / THD+N ≤ 1%

Bass: 120W/4Ω / THD+N ≤ 1%

The output power after the lower voltage limit of the speaker size

(the voltage limit is adjustable)

Treble: 34 core, 8Ω / 12.5W Output power configuration

Bass: 15 inch 8Ω / 128W Power

Two channel balanced/unbalanced input

Independent limited/MIC volume adjustment for each channel

3Limited or MIC input switch

2 * RCA stereo input

RCA independent volume control

Bluetooth on switch

Stereo Bluetooth link support

EQ treble volume adjustment

EQ bass volume adjustment

Total volume adjustment

Power supply and voltage limit indicator

Front panel function

Amplifier module+pre-processor

The SAF400/SAF800P is designed with discrete driver chip and discrete amplifier tube, including ± 15V and 5V output of

general power supply. The amplifier driver chip uses stable IR20957, and the amplifier tube uses IRFB5615PBF. The distortion

of the bridge output power is less than 1% at 380W/8Ω. In addition to excellent audio performance and power, it also has

temperature, voltage and current output monitoring and protection, which is very suitable for design as a subwoofer. It can be

designed as a stereo speaker through non bridge mode.

SAF400

Rated power model

SAF800P

Peak constant power model

Innovation

Speaker Control Panel + Power Amplifier Module

AMPLIFIER

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

230mm X 124mm X 60mm

Local protection:

DC protection

short circuit protection

overheating protection

input overload protection

output overload protection

soft start protection

Key Parameters

Amplifier power:

380W (THD+N ≤ 1%)

Applicable to global wide voltage power supply:

AC100-240V/50-60Hz

Input sensitivity:

+8dBu

Applicable speaker type

Professional subwoofer amplifier up to 36Hz

LCD display

2 direct output signals

Independent volume adjustment encoder knob can also adjust menu

Main volume, DSP preset, two channel input level and other parameters can be adjusted

2 independent balanced, unbalanced inputs (mixed internally as a single channel) of the main

menu can be adjusted at the same time

Front panel function

Applicable transducer specifications

Bass: 15 \"8Ω / 380W Power

Security certification Amplifier module+pre-processor

The SAF550/SAF1100P is a fully integrated audio amplifier, including ± 15V and 5V outputs of the general power supply.

TDA8954 is used for power amplification. It has a maximum output of 400W * 2 under 8Ω load. In addition to excellent

audio performance and power, it also has temperature, voltage and current output monitoring and protection, which is

very suitable for stereo speaker.

Innovation

AMPLIFIERSpeaker Control Panel + Power Amplifier Module

SAF500 Rated power model

SAF1100P Peak constant power model

Key Parameters

Bass channel output:

400W/8Ω * 2

Applicable to global wide voltage power supply:

C100-240V/50-60Hz

Input sensitivity:

+0dBu

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

185mm X 106.7mm X 55mm

LCD display

1 balanced limited circuit input

Independent volume adjustment control

One direct balanced signal output

Support network cable interface control and serial parallel output of other equipment

Power input interface is standard speaker self-locking interface

Power output interface is standard speaker self-locking interface, convenient for power supply of other speakers

Built in 24bit DSP processing module, with gain, crossover, equalization, delay, voltage limit, program memory and

other functions

Applicable speaker type

Self powered PA speaker

Linear array speaker

Front panel function

Applicable transducer specifications

Power of non pressurized limiter of single amplifier :

Treble: 150W/4 Ω/THD+N ≤ 1%

Bass: 400W/8 Ω/THD+N ≤ 1%

The output power after the lower

voltage limit of the speaker size

(the voltage limit is adjustable):

Security certification

Treble: 8 * 25.4 core tweeter 4Ω / 100W Output power configuration

Bass: 2 * 6.5 inch speaker 4Ω / 250W Output power configuration

Amplifier module+pre-processor

The SAF1500/SAF3000P is designed with discrete driver chip and discrete amplifier tube, including ± 15V and 12V output of

general power supply. The amplifier driver chip uses stable IR2092, and the amplifier tube uses IRFB4227. The distortion of this

machine is less than 1% when the bridge output power is 1500W/8Ω. In addition to excellent audio performance and power, it

also has temperature, voltage and current output monitoring and protection, which is very suitable for design as a subwoofer. It

can be designed as a stereo speaker through non bridge mode.

Innovation

AMPLIFIERSAF1500 Rated power model

SAF3000P Peak constant power model

Speaker Control Panel + Power Amplifier Module

Key Parameters

Bass channel output:

1500W/8Ω

Input voltage:

AC230V/50-60Hz or AC115V/50-60Hz

Input sensitivity:

+0dBu

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

208mm X 138mm X 58mm

LCD display

1 balanced limited circuit input

Independent volume adjustment control

One direct balanced signal output

Support network cable interface control and serial parallel output of other equipment

Power input interface is standard speaker self-locking interface

Power output interface is standard speaker self-locking interface, convenient for power supply of other speakers

Built in 24bit DSP processing module, with gain, crossover, equalization, delay, voltage limit, program memory and

other functions

Front panel function

Linear array speaker

Subwoofer

Applicable transducer specifications Applicable speaker type

18 inch 8 Ω, 1500W

Security certification

Amplifier module+pre-processor

The SAF500/SAF1000P is a fully integrated audio amplifier, including ± 15V and 5V outputs from a universal power supply. The

maximum power of the treble amplifier is 100W. The Bass amplifier uses TDA8954, which has a maximum output of 400W

under an 8Ω load. In addition to excellent audio performance and power, it also has temperature, voltage, and current output

monitoring and protection, which is very suitable for the design of a 2-way single speaker or stereo speaker.

Innovation

AMPLIFIERSAF500 Rated power model

SAF1000P Peak constant power model

Speaker Control Panel + Power Amplifier Module

Key Parameters

Treble channel output:

100W/8Ω

Input voltage:

AC230V/50-60Hz or AC115V/50-60Hz

Bass channel output:

400W/8Ω

Frequency response:

20~20KHz

Interface output voltage:

± 15V, 5V

Amplifier module size (including radiator):

185mm X 105mm X 55mm

LCD display

1 balanced limited circuit input

Independent volume adjustment control

One direct balanced signal output

Support network cable interface control and serial parallel output of other equipment

Power input interface is standard speaker self-locking interface

Power output interface is standard speaker self-locking interface, convenient for power supply of other speakers

Built in 24bit DSP processing module, with gain, crossover, equalization, delay, voltage limit, program memory and other functions

Front panel function

Security certification

Amplifier module+pre-processor

Applicable transducer specifications

Treble: 2 * 34.4 core 8Ω, 100W

Bass: 2 * 10 inch 16Ω, 400W

Applicable speaker type

Self powered PA speaker

Linear array speaker

AMPLIFIERThe SA25/SA50P is a fully integrated audio amplifier. The amplifier chip uses TPA3116D2, which has a maximum distortion of

20W 2 less than 10% under a 4Ω load. It is suitable for making MINI small speakers and bookshelf speakers on the desktop.

Innovation

SAF25 Rated power model

SAF50P Peak constant power model

Speaker Control Panel + Power Amplifier Module

4Ω load output power

20W*2@THD +N ≤ 10% (A-weighted)

8Ω load output power

11W*2@THD +N ≤ 1% (A-weighted)

Key Parameters

Frequency response:

20~20KHz ≤ 1dB

Power input of amplifier module:

DC15V/4A

Signal to noise ratio:

≥ 75dB

Amplifier module size (excluding radiator):

135mm X 75mm X 28mm

Functions and Interfaces:

INPUTS input RCA/3.5 stereo socket switching

MP3 playback function

With volume adjustment knob

With stereo limit socket output interface

Built in power on/off mute, short circuit and overheating protection

Applicable speaker type

Desktop MINI small speaker bookcase speaker

Applicable transducer specifications

Connected to full-range speaker:

4Ω, ≤ 15W

8Ω, ≤ 10W

Finished amplifier

CROSSOVER component

Crossover

component

Housing

White with black printing

Material

Alumina ceramics

Operation temperature range

-55℃ to +150℃

Cement resistor

Housing

Yellow with black printing

Operation temperature range

-40℃ to +85℃

Capacitor

Sounder capacitor

E/C BENNIC capacitor

Mylar capacitor

Ester film capacitor

CROSSOVER component

HORNSKH25-155

Can be used for 10\"/12\" speakers

Horns-1inches

Throat Diameter：25 mm (1.0 in)

Nominal Coverage Horizontal：90 °

Nominal Coverage Vertical：40 °

Cutoff Frequency：2 kHz

Material：PA+30%GF

Dimensions：155x155x91mm

SPECIFICATIONS:

Baffle Cutout Dimension：134x121 mm

Net Weight：0.28 kg

Other Details:

3x 5.5 mm holes 360° on 57 mm;

4x 5.5 mm holes 360° on 72.5 mm;

2x 6.5 mm holes 360° on 76.2 mm

MOUNTING AND SHIPPING INFO:

SKH25-220

Can be used for 12\"/15\" speakers

Horns-1inches

Throat Diameter：25 mm (1.0 in)

Nominal Coverage Horizontal：90 °

Nominal Coverage Vertical：40 °

Cutoff Frequency：2 kHz

Material：PA+30%GF

Dimensions：220x220x119.8mm

SPECIFICATIONS

Baffle Cutout Dimension：187x187 mm

Net Weight：0.56 kg

Other Details:

4x 6.5 mm holes 360° on 101.5 mm;

4x 7.5 mm holes 360° on 75 mm

MOUNTING AND SHIPPING INFO

Specification Sound transmittance

T1.5*5*5*1.8 width

T1.5*13*13*3 width

T1.5*8*8*3.5 width

53%

57%

60%

T1.5*6.9*6.9*2.2 width

T1.5*11*11*3 width

T1.5*4*4*1.5 width

T1.5*5*5*1.5 width

57%

57%

57%

57%

Q235

(Cold rolled plate)

Material

1.2/1.5

Thickness

(mm) (optional)

Spray

(Paint)

Finish

Square

hole

mesh

Hexagonal

hole

mesh

STENCIL

Q235

(Cold rolled plate)

Material

1.2/1.5

Thickness

(mm) (optional)

Spray

(Paint)

Finish

Specification Sound transmittance

T1.5*16*16*2.2 width

T1.5*12*5*2 width

T1.5*9.5*4*1.5 width

57%

57%

58%

T1.5*φ8*2 width

T1.5*φ5*1.5 width

T1.5*φ4*1.5 width

56%

54%

54%

Diamond

hole

mesh

Elliptical

hole

mesh

Circular

hole

mesh

Material Thickness Finish (mm) (optional)

SPEAKER back panel

Thickness

J115X001

FM007Q5

FR208X003

H15X004

FF0000X082

FF0000X023

FV10

Dimension

T3*99*138*23.5

T3*99*138*23.5

T2.5*99*138*53.5

T2*130*90

T1*178*152*60

T1*178*152*60

170*140*55

3

3

2.5

2

1

1

1

Color

Injection Black

Injection Black

Injection Black

Spray black matte

Spray black matte

Spray black matte

Spray black matte

Available

connector

2*speakON XLR port

2*6.35 Jack

2*speakON XLR port

2*Terminal

1*6.35 Jack

2*speakON XLR port

1*Potentiometer knob

2*speakON XLR port

2*speakON XLR port

2*speakON XLR port

Material ABS

ABS

ABS

Cold rolled sheet

Stretch sheet

Stretch sheet

Stretch sheet

with switch hole

(mm) (mm)

Dimension Thickness Color Available

connector

Material

L218SX013

TS-66X026

FT8X006

FM007X003

FP205X012

FK040X01

SP8.1PX003

T2.5*152*92

T2*165.1*139.7

T2.5*160*70

T3*99.5*138.5

T2*65*55

95*83*49

T2*120*140*7.5

2.5

2

2.5

3

2

2

2

Spray black anti-UV

Spray black matte

Spray white matte

Injection black

Painted black matt

Injection black

Spray black matte

2*Waterfroof connector

2*Waterproof port

2*speakON XLR port

2*speakON XLR port

2*speakON XLR port

1*Plug-in terminal block

1*speakON XLR port

2*black & red terminals

1*Plug-in terminal block

2*speakON XLR port

Aluminum

Cold rolled sheet

Cold rolled sheet

ABS

Cold rolled sheet

ABS

Cold rolled sheet

(mm) (mm)

SPEAKER handle

Material

FK042

FK043

JH133

JH121

G12X026

G08X014

Dimension

T1.2*280*160*60

T1.2*220*160*60

197*172*63

215*175*65

clod rolled sheet

clod rolled sheet

ABS

ABS

ABS/Al crossbar

Aluminum alloy

Color

Black

Black

Black

Black

Black

Matte black

Surface Spray

Spray

Injection

Injection

Spray

Painted

(mm) 160*153*25

T1*170*155

190*164

T1*207.5*162.5*26

Dimension Surface Material Color

S3-12X002

BL-901

BL-910

JH118

JH7101

BL-908

210*164.5*65

172.5*169*134

T1.2*275*163*62

161*162.6*116.1

Die-cast aluminum

ABS

ABS

ABS

Clod rolled sheet

Clod rolled sheet

Matte grey silver

Black

Black

Black

Black

Black

Painted

Injection

Injection

Injection

Spray

Spray

T40*148*198

T10*170*122.6

228*190*65

190*83.3*20

(mm)

SPEAKER stand accessories

SPEAKER stand accessories

WALL mount for speaker

SB605 Mounting size Connecting plate size

Size Load Net weight Inner box Master carton

55x115x105mm 15kg 0.65kg 65x125x125mm 345x395x280mm

(30 PCS)

SB606 Mounting size Connecting plate size

Size Load Net weight Inner box Master carton

90x160x108mm 20kg 1.05kg 170x100x125mm 360x320x280mm

(18 PCS)

SB607 Mounting size Connecting plate size

Size Load Net weight Inner box Master carton

120x220x108mm 30kg 1.35kg 230x130x125mm 480x410x280mm

(12 PCS)

Speaker wall mount uses independent locking connection to

achieve wall fixing of the speaker. The back panel of the

speaker stand can be customized according to the fixed holes

of different speakers. Three models are available.

LINE array speaker stand

H-TYPE LINE array speaker stand

Packaging

Size （W×D×H）:1×1.8×1.2cm

Pins (6/pcs)

Optional accessory (load cart):

DNA020C

DNA020

This stand is suitable for 8 \", 12\", 15\"line array speakers, using high strength aluminum alloy material, high stability, high

load capacity, can carry up to 3 tons, without any concerns.

This product structure uses a combination of detachable and foldable, which is convenient to install, minimizes

packaging volume and facilitates transportation. It is the best choice for various performance venues.

Material: steel

Height: 8m

L x W: 1.8X1.8m

Area for four supporting feet: 4X4m

Finish: painted sliver

Load capacity: 800kg

Test data 3200kg withstands

4 times the safety factor

Specification

DNA021

Material: steel

Height: 6m

L x W: 1.5X1.5m

Area for four supporting feet: 4X4m

Finish: painted sliver

Load capacity: 600kg

Test data 2400kg withstands

4 times the safety factor

Specification

ADJUSTABLE Ceiling mount hanger

Adjustable

Ceiling mount hanger

The hanger is made of

lightweight aluminium alloy and

is designed with adjustable

length to meet the requirements

of height matching for hoisting

and installation equipment.

Depending on the room height, three

types with different scaling lengths

are designed, which are DB097-1

200-300 (mm), DB097-2 300-500

(mm) and DB097-3 500-900 (mm),

respectively, to meet the current high

demand of most room height. A

detachable rotating self-locking

device is used between the adjusting

lever and the device to facilitate the

reliability of the customer's

This series of products can

withstand 25KG and less

equipment, safe and reliable. The

product is fixed in the ceiling and

has a decorative cover. It is also

designed with a rotating self-lock to

make the overall effect more

beautiful and coordinated after

installation.

Feature

▲ Lightweight aluminium profile ▲ Adjustable length

▲ Suitable options for different room heights ▲ Fixed cover with self-locking

▲ Bottom equipment connection swivel self-locking and removable