该页无缩略图
How To Choose An Oil Charging Pump
Following points should be considered when you choose a refrigeration oil charging pump
1, System's back pressure
When the system is under back pressure,the greater of back pressure that the oil pump can overcome, the more time and effort will be saved when charging.Therefore,the maximum back pressure that can be overcome must be considered when selecting an oil charging pump.
2,FlowRate
Theflow rateofaoilcharging pump is usuallyexpressed in liters/hour,so the time to charge is directly related to the flow rate.Therefore,it is necessary to select a suitable pump according to the amount of oil marked on the compressor and how many units need to charge.
3, Viscosity
Viscosity is a main performance index of refrigeration oil.Diferent refrigerantshave different requirements for viscosity.At thesame time,the viscosity of the refrigerating oil changes greatly with the temperature.The lower the temperature,the greater the viscosity.Therefore,the characteristics of the added refrigeration oil and the ambient temperature must be fully considered when selecting the oil charging pump.
Oil Charging Pump Selection Guide
| Model | MaxOvercome | FlowRate | Viscosity |
| R1 | 10bar(145psi) | 50ml/stoke | 68 |
| R2 | 15bar(218psi) | 75ml/stoke | 68 |
| R4 | 16bar(232psi) | 150L/h | 100 |
| R6 | 25bar(362psi) | 350L/h | 100 |
| R6 PRO | 20bar(290psi) | 300L/h | 100 |
| Unit Label | |||||||
| Model | xXXXXXXXX | ||||||
| Cooling capacity | 454kW | Voltage | 3PHASE,380V,50Hz | ||||
| Power Input | 84.9kW | Running current | 154A | ||||
| Power factor | 87% | Comp output | 2X45kW | ||||
| Refrigerant | R134a /140kg | Design press(Hi/Lo) | H1.59,L0.87Mpa | ||||
| Ref oil | FVC68D/22L | Air tight test press(Hi/Lo) | H1,59,L0.87Mpa | ||||
| MFG No. Production license No. | XXXX | Unit weight XXXXXXXXX | 3650kg | ||||
Remarks:If itisanewunit oranoverhauled unit,theoil filing amount isindicatedon theunit nameplate.If it is just change oil,follow the principle of chargingas muchas it isreleased.
Refrigeration Oil's Selection (For reference only)
| Viscosity | Domestic circonditioning unit | Comrg | ||||
| Piston | Rotary | Centrifugal | Piston | Screw | Scroll | |
| 32 | √ | √ | √ | √ | ||
| 46 | √ | √ | √ | √ | ||
| 68 | √ | √ | √ | √ | √ | |
| 100 | √ | √ | √ | |||
| PAGE/099-100 |
R1 Manual Refrigeration Oil Charging Pump
TheR1manualrefrigerationoilchargingpumpisusedtoaddorremoverefrigerationoil whenmaintainingairconditioningor refrigerationsystems.
Thepumpcanbeusedwhiletheequipmentisruningwithoutshutingdownthesystemforcharging.Itmatches12.5and 5galloncontainersandeachstrokecharges1.7 floz (50ml) of refrigerationoilat145 psi (10bar).
R1 Manual Refrigeration Oil Charging Pump
Pressurized Charging,Reliable& Durable
Stainlesssteel material,reliableanddurable.
田
Anti-backflow structure,ensuring system safety during charging
0
Special design for connecting oil bottles of different sizes.
1
Pumps oil into the system without shuting down for charging
10 bar 0 Per stroke 50mL 1 Max overcoming back pressure
Technical Data
Accessories
| Model | R1 |
| Max.Pump to Against Pressure | 10 bar (145 psi) |
| Max. Pump Rate per Stroke | 50 mL |
| Applicable Oil Bottle Size | All sizes |
| Hose Connect | 1/4" SAE |
| Outlet Hose | 1.5 m Charging Hose |
| Dimension(mm) | 85*70*410 |
| Weight | 1.4 kg |
| Packing | Carton: 10 pcs |
R2 Manual Refrigeration Oil Charging Pump
TheR2refrigerationoilcharging pumpisdesignedandbuiltoallowtechnicianstochargetheoilintotheHVACsystem withoutshutingofftherunningunit.Meanwhile,itsspecialpedalstructuregivesbeteruserexperience.
Itcomeswithsuctiontransferhoseandfitingsandisfitedwithauniversalstopperthatcanautomaticalladjusttomatch allstandardopeningsofoilcontainersof1，2.5and5gallon.Itallowsyoutopumpoilintothecompressoronthe downstrokewhilethesystemisunderpressure,whichmakesiteasiertotransfertheoilonthepositivestroke.
R2 Manual Refrigeration Oil Charging Pump
Pressurized Charging,Reliable& Durable
Stainless steel materials,reliable and durable.
田
Anti-backflow structure,ensuring system safety during charging
Special pedal design,betteruse experience.
Pumps oil into the system without shutting down for charging.
0
75mL Perstroke
0
IU UdI Max overcoming back pressure
Technical Data
Accessories
| Model | R2 |
| Max.Pump to Against Pressure | 15bar (218psi) |
| Max. Pump Rate per Stroke | 75ml |
| Applicable Oil Bottle Size | All sizes |
| Hose Connect | 1/4"&3/8"SAE |
| Outlet Hose | 1.5 m HP Charging Hose |
| Dimension(mm) | 120*125*550 |
| Weight | 2.5kg |
| Packing | Carton: 6 pcs |
R4 Electric Refrigeration Oil Charging Pump
TheR4isaportablerefrigerationoiltansferpumpwhichisidealforchargingcompressoroilintolarge HVACsystems.Witha 1/3HPelectricmotordirectlycoupledtoafixed-displacementrotorpump,theoilcanbepumpedintothesystemevenwhile inoperation.
Athermal-overloadprotectorforeffectivelypreventingoverloadedandabal-typecheckvalvearefitedinsideofthepump topreventoilorrefrigerantfromflowingbackincaseofapowerfailureorbreakdown,thustokeepthesysteminsafety status.
R4 Electric Refrigeration Oil Charging Pump
Portable&Powerful
Strong power,easy charging under large system's back pressure.
田
Built-in boost valve can make the instant pressurization.
High precision rotor pump with self-priming, ensures easy charging.
0
Built-in thermal protection device,effectively prevent overloading.
16 bar 0 15axL/w ↑ Max percoming
TechnicalData
Accessories
| Model | R4 |
| Voltage | 230V~/ 50-60Hz or 100-120 V~/50-60Hz |
| Motor Power | 1/3 HP |
| Pump to Against Pressure(Max.) | 16 bar (232 psi) |
| FlowRate(Max.) | 150 L/h |
| Hose Connect | 1/4"&3/8" SAE |
| Dimension(mm) | 230*144*216 |
| Weight | 5.8 kg |
| Packing | Carton: 2 pcs |
R6 Electric Refrigeration Oil Charging Pump
TheR6isaheavy-dutyrefrigerationoiltransferpump，idealforinjectingcompressoroilintolargeHVACsystems.Itis equippedwitha3/4HPmotoranddirectlycoupledtoahigh-displacementgearpump,whichcanpumpoilsofdifrent viscosities (evenlow-temperature high-viscosityoils)intothe HVACsystemeveninoperation.
Itsbuilt-inthermaloverloadprotectorcaneffectivelypreventthepumpfromoverheatinganditsballcheckvalvefitedinside thepumppreventstheoilortherefrigerantbackflowincaseofpowerfailureormalfunction,thustoensurethesystemsafe.
Inaddition，anoverheadpressuregaugefittdonthepumpiseasytoreadtheexactworkingpressure.Therefore，theR6is theultimatesolution forrefrigerationoilcharging.
R6 Electric Refrigeration Oil Charging Pump
Strong Power, Easy Charging
Strong power,easy charging under large system's back pressure.
O
Overhead pressure gauge,easy to read the exact operation pressure.
High precision and high displacement gear pump,ensuring easy charging.
0
Built-in thermal protection device, effectively prevent overloading.
0 350 L/h Max flow
↑
25bar Max overcoming back pressure
TechnicalData
Accessories
| Model | R6 |
| Voltage | 230V~/ 50-60Hz or 100-120V~/50-60Hz |
| Motor Power | 3/4 HP |
| Pump to Against Pressure(Max.) | 25 bar (362 psi) |
| FlowRate(Max.) | 350L/h |
| Hose Connect | 1/4"& 3/8" SAE |
| Dimension(mm) | 308*175*263.5 |
| Weight | 11.0 kg |
| Packing | Carton: 1 pc |
PAGE/107-108
R6 PRO Electric Refrigeration Oil Charging Pump
TheR6PROisanext-generation，high-performanceelectricpumpengineeredfortherapidandeficientchargingof efrigerationoilintolarge-capacityrefrigerationsystems.
BuildingupontheprovenstrengthsoftheR6model，itineritsaihackpressurecapabilityof20adaowfuflow rateof3ooL/h,ensuringswiftoilchangesfor largechillersandindustrialunits.
AkeyadancementistheintegrationfabrushlessDCmotor.Tistechnologyreplacesonventionalulkyiductiootors achievingadramaticallymorecompact fotprintatequivalent poweroutput.Thisinnovationresultsinaremarkably lightweightunitwithanetweightofjust3.5kg，representingasignificantimprovementovertheprevious10.6kg.
Forenhancedoperationanddurablity,thepumpfeaturesarobustanti-collsionpressuregaugeforreal-timemonitoringof chargingpressure.Furthermore,itsspark-freedesignensuressafeuseinenvironmentswithA2Lclassrefrigerants,meeting modernsafetystandardsforflammablerefrigerantsystems.
R6PRO Electric Refrigeration Oil Charging Pump
Portable&Powerful
Strong power,easy charging under large system's back pressure.
High precision rotor pump with self-priming, ensures easy charging.
回
Overhead pressure gauge,easy to read the exact operation pressure.
Lightweight design,net weight of only 3 . 5 ~ \mathsf {kg } for superior portability.
20bar 0 M LI/hw ↑ Macx prsoming
Technical Data
Accessories
| Model | R6Pro |
| Voltage | 100-230 V~/50-60Hz |
| Motor Power | 3/4 HP |
| Pump to Against Pressure(Max.) | 20 bar (290 psi) |
| Flow Rate(Max.) | 300 L/h |
| Hose Connect | 1/4"&3/8"SAE |
| Dimension(mm) | 230*144*216 |
| Weight | 3.5 kg |
| Packing | Carton: 2 pcs |
PAGE/109-110
HVAC/R Tools & Equipment
Due to years of deep technical accumulation of refrigeration tools & equipment and unceasing exploration of high technologies，and the initial intention of " helping HAVC service technicians to complete air-conditioning service work efficiently，WIPCOOL has launchedhighlydifferentiationproducts.
Our products covered recovery & vacuum machines， refrigeration tools， tubing tools, measuring& testing tools.
Recovery&Vacuum
Recovery and vacuum are two important methods in the maintenance process of HVAC systems.
HVAC vacuum pumps remove gases, vapors,and other impurities from the refrigeration system. Before refiling the refrigerant, It is necessary to maintain ultimate vacuum to ensure that the air conditioning systemisfreeofpollutants.
Refrigerantrecoverymachinesrecoverrefrigerant inthe form of liquid or vapor fromresidential, commercial,and industrialairconditioningunitsandrefrigerationsystems.
In WIPCOOL， we have developed a fullrange of vacuum and recovery tools and equipment to surpass the best in the market. We have brought new innovations and features to our products to ensure that you have the tools and equipment you need every day, help you complete your work more easily，safer &moreefficiently.
Single Piston Refrigerant Recovery Machine
The MRM55isa lightweight,eficientandreliable refrigerant recovery machine.Itscompactand sturdy casing providesan ideal solution for quick and easy refrigerant recovery.
Differentfrommostbrandsofrefrigerantrecoverymachines,itadoptsanintegratedvertical structure design with a top-mounted control knob and two pressure gauges.
Inaddition,thereisamaintenanceportonthebackofthemachinetofacilitatethereplacementof piston ringsandairvalvecores,bringingmoreuser-friendlyexperience.
Atthesame time,thisrecoverymachinemeets forA2L-levelrefrigerantsandisbackwardcompatiblewith theseolderones(suchasR12,R22andR410A).
MRM55 Refrigerant Recovery Machine
Lightweight,Efficient&Reliable
Overhead pressure gauge for easyreadingtheexactdata
| Model | MRM55/MRM550S | ||||
| Refrigerant | IIl: R12, R134A,R401C,R406A,R500,R1234yf IV:R22R0C,R | Automatic Safety Shut-off | 38.5 bar /3850 kpa (558 psi) | ||
| Vapor | 0.22 kg/min.25kg/mi2g/i | ||||
| Voltage | V: R402A, R404A,R407A,R407B,R410A,R507, R32 100-120 V~/ 50-60 Hz 230V~/50-60 Hz | Recovery Rate | Liquid | 1.8 kg/min 2.0 kg/min 2.2 kg/min | |
| Motor Power | 3/4 HP | Push/Pull5.0 kg/min6.0 kg/min 6.5 kg/min | |||
| Motor Speed | 2300RPM | Operating Temperature | 0°℃-40° | ||
| Current(Max.) | 8A | Dimensions Weight | 259mm(L)*235mm(W)*390mm(H) | ||
| Compressor | Oil-less,Ar-cooled,Pstontyle | Packing | Carton: 1 pc | 9.5 kg | |
Accessories
Dual Pistons Refrigerant Recovery Machine
The MRM75 is an efficient and reliable refrigerant recovery machine with a compact and sturdy casing.Its dual-piston design providesan ideal solution for fast and efficient refrigerant recovery.
Different from most brands of refrigerant recovery machines,it adopts the design of mounting control knob and pressure gauges on the top.Inadition,there is a maintenance port on the back of the machine tofacilitate thereplacementof pistonringsand gas valvecores,bringingamoreuser-friendlyexperience.
Atthe same time,the recovery machinemeets for A2L-level refrigerantsand is backward compatible with theseolderones(suchasR12, R22and R410A).
MRM75 Refrigerant Recovery Machine
FastRecovery,Efficient&Reliable
| Model | MRM75/MRM750S | ||||
| Refrigerant | III: R12, R134A,R401C,R406A,R500,R1234yf | Automatic Safety Shut-off | 38.5 bar/3850 kpa (558 psi) | ||
| Voltage | 100-120V~/50-60 Hz | Recovery Rate 230 V~/ 50-60 Hz | Liquir | ||
| MotorPower | 1.3HP | Operating Temperature | Push/Pull 8.2 kg/min9.3 kg/min10.5 kg/min | ||
| Motor Speed | 3000RPM | 386mm(L)*255mm(W)*276mm(H) | 0°℃-40°℃ | ||
| Current(Max.) | 13A 6.5A | Dimensions Weight | 11.6 kg | ||
| Compressor | Packing | ||||
| Oil-less,Air-cooled,Piston-style | Carton:1 pc | ||||
Accessories
S Series Vacuum pump
If price is your primary consideration,the SSeriesvacuum pump is the idealchoice.Witha wide pumping capacity whose flow rate covers 2-4CFM (57-113LPM)，it's ideal for split systems，automotive light applications,andsmallcommercialapplications.
Fitted witha fulytransparent oiltank that ismade of customized specialengineering plasticABS,you can timely understand the status of the pump oil and its running system.
And the pump is not only durable,but also allows for quick troubleshooting and it is easy to repair or replace parts.
S Series Vacuum pump
Compact&Portable
Product Features
| Model | S1 | S1.5 | S2 |
| Voltage | 230V~/50-60 Hz or100-120V~/50-60 Hz | ||
| UltimateVacuum | 150 microns | ||
| Input Power | 1/4 HP | 1/4 HP | 1/3 HP |
| FlowRate (Max.) | 2CFM 57 L/min | 3CFM 85L/min | 4CFM 113 L/min |
| Oil Capacity | 230mL | 210mL | 200mL |
| Weight | 4.0 kg | 4.3 kg | 4.5 kg |
| Dimension | 266*121*194 | ||
| Inlet Port | 1/4" SAE | ||
| Packing | Carton:3 pcs | ||
| PAGE/119-120 |
F Series R410A Vacuum Pump
TheR410Aisanewtypeofecofriendlyrefrigerantthatdoesnotdamagetheozonelayer，soitiswidelyusedinhousehold andcommercialairconditioners.
SinceR410AisdiffrentfromthepreviouslyusedrefrigerantssuchasR12andR22,itiseasytobeaffectedbyimpuris suchasmoistureoxidelayergreaseetc.Therefore,fullattentionshouldbepaidduringconstructionandoperationand cleanhosesshouldbeusedtopreventthemixingofwaterandothersubstances.Atthesametime,deeppumpingfor ultimatevacuumshouldbecarredouttopreventtheairinthesystemfromreactingwiththerefrigerationoilandaffecting itsperformance.Inadition,asolenoidvalveshouldbeusedtopreventtherefrigerantinthevacuumpumpfromflowing back into thesystem.
Asordinaryvacuumpumpsareliabletooillakagewhenplacedonthesideduringworkortransportation，ifyoucaremuch onagooduserexperiencethentheFseriesvacuumpumpwhichisequippedwithabuilt-insolenoidvalveasstandardand avoidstheriskofoilleakage,isyouridealchoice.Atthesametime,thedesignofthetop-mountedvacuumgaugealso bringsyounewexperiencetoreadaccuratevacuumdatawithoutbendingover.
Inadition,theFseriesvacuumpumpadoptsareinforcedaluminumalloiltankwithgoodheatdissipationandcemical corosionresistance;theextra-largesightglassmakesiteasytochecktheoilcolorandoillevel;thepowerfulbut lightweightDCmotorprovidesstrongtorqueforeasystartupandmaintainsperfectoperationevenatlowerambient temperature.
F Series R410A Vacuum Pump
Vacuuming Quickly
Product Features
| Model | F1 | F1.5 | 2F0 | 2F1 | |
| Voltage | 230 V~/ 50-60 Hzor 100-120 V~/ 50-60Hz | ||||
| Ultimate Vacuum | 150microns | ||||
| InputPower | 1/4 HP | 1/4 HP | 1/4 HP | 1/4 HP | |
| FlowRate (Max.) | 1.5 CFM 42 L/min | 3CFM 85L/min | 1.5 CFM 42 L/min | 2.5 CFM 71 L/min | |
| Oil Capacity | 200 mL | 330mL | 280mL | 280 mL | |
| Weight | 4.5kg | 5.0kg | 5.0 kg | 5.0kg | |
| Dimension | 289*113*198 | ||||
| Inlet Port | 309*113*198 1/4" SAE | ||||
| Packing | Carton: 3 pcs | ||||
F Series A2L Vacuum Pump
R-32isanewgenerationrefrigerantwithhighheatconductioneficiencyandlessenvironmentalimpact.Airconditioners usingR-32refrigerantcansaveuptoabout10%ofelectricityconsumptioncomparedtoR22.Inadition,R-32featuresa 1/3lower global warmingpotential(GWP)，whichbringsasignificantfriendlyimpacttotheenvironmentcomparedto curentrefrigerantswidelyusedlikeR-22andR-410A.Therefore,allmajormanufacturersarestronglypromotingitasanew refrigerantinthemarket.
DuetotheflammabilityofR32andhighworkingpressure,compatibilityofexistingequipment(suchasmanifoldspreure gauges,vacuumpumps,recoveryunits)mustbechecked toeliminateanypotential ignitionsource.
TheFseriesR32vacuumpumpdesignedforthenewgenerationofrefrigerantscanbeusedwithflammable refrigerants(A2&A2levels)，andisackwardcompatiblewithcommonones(suchasR122andR410Aetc.).Ifitd withabuilt-insolenoidvalveandoverheadvacuumgaugeanditsreinforcedaluminumallyoiltankbenefitsefficientheat disipationandchemicalcorosionresistance.Meanwhile，theoilcolorandoillevelcanbeeasilyseenthroughtheextralargesightglass.ThepowerfulandlightweightbrushlessDCmotorprovidesstrongstartuptorque，highworkingefficiency longservice lifeandcanmaintainstablerunningeveninlowambienttemperature.
F Series A2L Vacuum Pump
Light Weight, Fast Vacuumization
Product Features
TechnicalData
| Model | 2F0R | 2F1R | 2F1.5R | F2R | 2F2R | F3R | 2F3R | F4R | 2F4R | F5R | 2F5R |
| Voltage | 230V~/50-60 Hz or 100-120V~/50-60 Hz | ||||||||||
| Ultimate Vacuum | 15microns | 150microns 15microns 150microns 15microns 150microns15microns 150microns15microns | |||||||||
| Input Power | 1/4 HP | 1/4 HP | 1/3 HP | 1/3 HP | 1/2 HP | 1/2 HP | 3/4 HP | 3/4 HP | 1 HP | 1 HP | 1 HP |
| Flow Rate (Max.) | 1.5 L/mM | 2.5CFM | 3 LFmn | 152 LFmin | 15 LFmin | 17 L/min | 17 L/min | 255/min255Lmin31minn | |||
| Oil Capacity | 280mL | 280 mL | 480 mL | 580mL | 450 mL | 560 mL | 520 mL | 690mL | 500mL | 670 mL | 480 mL |
| Weight | 4.5 kg | 4.5kg | 7.5kg | 6.5kg | 8.0 kg | 7.5kg | 10.0 kg | 9.0 kg | 10.5kg | 9.5kg | 11.0 kg |
| Dimension | 309*113*198 | 339*130*225 | 365*147*242 | ||||||||
| Inlet Port | 1/4" SAE | 1/4"& 3/8"SAE | 1/4"& 3/8"SAE | ||||||||
| Packing | Carton: 3 pcs | Carton: 3 pcs | Carton: 2 pcs | ||||||||
F Series Cordless Vacuum Pump
TheFSeriescordless vacuum pumpsare free fromthe constraints of power cords,providing instant power and quick vacuumization.Powered byan18Vlithium battery，multiple taskscanbecompleted ona'single charge. Each charge (4.0Ah) can run for up to 45-60 minutes.
There're three options for flow rate (1.5/2.5/5 CFM)and the pump iscompatible with new Gen of refrigerants (A2L level).It's fitted withabuilt-insolenoid valve and top-mounted vacuum gaugeand its reinforcedaluminumalloyoiltank benefitseficientheatdissipationandchemicalcorrosionresistance. Meanwhile the extra-large oil sight glass makes it easy to check the oil color and oil level.
Inaddition,inorder to maximize theuseof existing lithium bateriesof users forcostsaving,we have speciallydeveloped10mainstreambrand_batteryadapters (Bosch，Makita，Panasonic，Dewalt，Vorx, Milwaukee,Devon,Dongcheng,Hiltiand Hikoki)，whichmakes the batery holdermatchablewith theabove brandbatteries.
F Series Cordless Vacuum Pump
Li-ion Battery Power, Portable Evacuation
| Model | F1B | 2F0B | 2FOBR | 2F1B | 2F1BR | F2BR | 2F2BR | |
| Voltage | DC18V (AEG/RIDGID interface) | |||||||
| Ultimate Vacuum | 150 microns | 15 microns | 15 microns | 15microns | 15 microns | 150 microns | 15 microns | |
| Input Power | 1/4 HP | 1/4 HP | 1/4 HP | 1/4 HP | 1/4 HP | 1/3 HP | 1/2 HP | |
| Flow Rate (Max.) | 1.5LCFM | 41.5 L/mm | 1.5 L/mm | 2.5L/Fm | 2.5L/mM | 145 LF/min | 1.52 LFmin | |
| Oil Capacity | 200 mL | 280 mL | 280 mL | 280 mL | 280mL | 580mL | 450mL | |
| Weight | 4.5kg | 5.0 kg | 4.5 kg | 5.0kg | 4.5kg | 6.5 kg | 7.5 kg | |
| Dimension | 289*113*198 | 309*113*198 | 339x130x225 | |||||
| Reference running time | 45 mins (4.0AhLi-ion battery) | 40mins (4.0AhLi-ion battery) | ||||||
| Reference charging time | 210 mins (4.0AhLi-ion battery) | 210 mins (4.0AhLi-ion battery) | ||||||
| Remarks your local batteries. | Duetothestricttransportationterms,wecannotincludeanyLi-ionbattry,youcanchooseourbatteryadaptersforuse | |||||||
| Packing Carton: 3 pcs | ||||||||
F Series Dual Powered Vacuum Pump (Li-ion & AC powered)
Dual Powered,Freely Switch
白
Neversuffer from low battery anxiety
Freely switch between AC power and battery power
Avoidingany downtime on the jobsite
Product Description
TheFseriesdual powervacuumpumpis basedonthecordless vacuumpump.Itcanswitch freely between18Vlithium batteryand20VACandrunfor45-60minutesunderbatterymode,solvingtheproblemofACpowersourcingforoutdoor jobs.However,ifconnectedtoACpowerthatiseasyforsourcing,thenthepumpcanrunforalongtimewithoutworryof lithium battery running out in a short time.
There'rethreeoptionsforflowrate(1.5/2.5/5CFM)andthepumpiscompatiblewithnewGenofrefrigerants(A2Llevel).It's fittedwithabuilt-insolenoidvalveandtop-mountedvacuumgaugeanditsreinforcedaluminumaloyoiltankbenfits fficientheatdisipationandchemicalcorosionresistance.Meanwhiletheextra-largeoilsight glassmakesiteasytocheck theoilcolorandoil level.
Inadition,inordertomaximizetheuseofexistinglitumbateriesofusersforostsavingweavespeciallydeveloped10 mainstreambanderydapters(BoshMakitaPanasoic,ewalt,VorxaukeDevonDongcheng,Hitidkoki, which makes the battery holder matchable with the above brand batteries.
| Model | F1BK | 2F1BRK | F2BRK | 2F2BRK |
| Voltage | 220-240V(G/5- | |||
| Flow Rate(Max.) | 1.5 CFM 42 L/min | 2.5CFM 71 L/min | 5CFM 142 L/min | 5 CFM 142 L/min |
| Ultimate Vacuum | 150 microns | 15 microns | 150 microns | 15 microns |
| Include: | Tool box, Vacuum pump,Battery adapter(2 free from the 10 adapters), Battery converter | |||
| Reference Running Time | 45 mins (4.0AhLi-ion battery) | 40 mins (4.0AhLi-ion battery) | ||
| Reference Charging Time | 210 mins (4.0AhLi-ion battery) | 210 mins (4.0AhLi-ion battery) | ||
| Remarks | ||||
AC Power Supply Plugs
| Model | Description |
| W01 | Israel plug |
| W02 | China plug |
| W03 | Australia plug |
| W04 | South africa plug |
| W05 | Europe plug |
| W06 | America plug |
| W07 | Britain plug |
| W08 | Japan plug |
| W09 | Italy plug |
| W10 | Argentina plug |
| W11 | Brazil plug |
| W12 | South Korea Plug |
Product Diemension
F series
S series
Size Table
| Model | A | B | c | D | E | F | G | H | - | J |
| S1 S1.5 S2 | 145 | 36 | 107 | 266 | 73 | 138 | 70 | 69 | 194 | 121 |
| F1.52F0(R) 2F1(R) | 175 | 45 | 250 | 309 | 90 | 162 | 60 | 73 | 200 | 115 |
| F2RF3R2F1.5R2F2R | 195 | 45 | 280 | 339 | 110 | 165 | 70 | 87 | 225 | 130 |
| F4RF5R2F3R2F4R2F5R | 211 | 50 | 300 | 365 | 115 | 190 | 70 | 97 | 242 | 147 |
| PAGE/127-128 |
Industrial Vacuum Pump
The2F10isa high-performancetwo-stagerotaryvane vacuum pumpdesigned fordemanding industrial applications.Its two-stage structure achieves a higher ultimate vacuum level and faster pumping speed. Equipped witha standard gas ballast valve,it eficiently handles moisture and refrigerant vapor，preventing oil emulsification.Theunique 5 independent inlet valve ports enable synchronized multi-channel operation, significantlyimprovingworkefficiency.
Featuring enhanced cooling anda durable design，this pumpensures stable long-term operation.Itis particularly wel-suited for the instalationand maintenance of large HVAC systems (including ammoniabased systems)，vacuum requirements inscientific laboratories,and industrial vacuum processes insectors suchaselectrical powerandcompositematerials.
With itsreliable performance，flexible operation,and powerful pumping capability，the 2F10 isan ideal choiceforprofessional-gradevacuumsolutions.
2F10 Industrial Vacuum Pump
High Ultimate Vacuum Reliable&Stable
Product Features
Easytomaintain Sight glass makes visual inspectionof the oil level and conditions simple
Technical Data
Gas ballast valve Used when pumping vapour
Fast evacuation 5wayconnectionswith 3\*3/8"SAE&2\*1/4"SAE
Reliable performance
Overheating protection is provided viaa thermal overloaddevicewhich is fittedinthemotor
| Model | 2F10 | |
| Voltage | 100-120 V~/50-60 Hzor 230 V~/50-60Hz | |
| Peak Pumping Speed | 50Hz | 20 CFM |
| 60Hz | 24 CFM | |
| Ultimate Pressurew/o Gas Ballast | 4 microns | |
| Ultimate Pressure with Gas Ballast | 8 microns | |
| MotorPower | 1.5 HP | |
| Rotate Speed(rmp) | 1420@50Hz/1700@60Hz | |
| OperatingAmbientTemperature | 8°℃-40°℃ | |
| Weight | ×40kgs | |
| Accessories | Trolley | |
Rolling Tool Box Storage System
Theroling toolbox storage system ismade from impact-resistant polymersand metal-reinforced parts to meethardconditionsofthejobsite
This tool storage solution connectswith 3independent tool boxes via integrated locking cleatsand has 110L loading capacity in total.It allows to individualize your storage system for easy arranging HVAC tools& equipmentaswellas foreasycarry.
AnIP65-rated weather seal protectstoolsandaccessories fromrainandother jobsitedebris.The interior traykeeps your equipment organized tofityourneeds，thereforeitis themost durableand universal storagesystemintheindustry.
Rolling Tool Box Storage System
| Model | TBR-1M | TBR-2K | TBR-3K |
| Weight Capacity(kg) | 45 | 150 | 195 |
| External Dimensions(mm) | 554(L)*335(W)*305(H) | 560(L)*475(W)*540(H) | 560(L)*475(W)*845(H) |
| Internal Capacity(L) | 38 | 72 | 110 |
| Net Weight(kg) | 4.5 | 13.5 | 17.0 |
Tool Case Storage System
Keep your HvAC tools organized and protected with WIPCOOL tool storage solutions.
Built fordurabilityand convenience,these productsaredesigned to handle thedemands of professionals, ensuringyourtoolsaresecureandeasytoaccess.
Whether you need compact cases for portability or larger storage solutionsfor extensive toolkits,WIPCOOL offers reliable options to suit your needs.Stay efficient and prepared on the job withWIPCOOL
TC-12 Open Tote Tool Bag With Plastic Base
Portable&Durable
TC-18 Open Tote Tool Bag With Removable Flap
Versatile&Durable
Technical Data
| Model | TC-18 |
| Material | 1680D polyester fabric |
| Weight Capacity(kg) | 15.00 kg |
| Net Weight(kg) | 2.51 kg |
| External Dimensions(mm) | 460(L)*210(W)*350(H) |
| Packing | Carton:2 pcs |
TC-35 Tool Bag Backpack
Comfortable&Durable
Technical Data
| Model | TC-35 |
| Material | 600D polyester fabric |
| Weight Capacity(kg) | 15.00 kg |
| NetWeight(kg) | 2.03 kg |
| External Dimensions(mm) | 330(L)*230(W)*470(H) |
| Packing | Carton: 4 pcs |
TC-7 Magnetic Wristband
Portable&Comfortable
TC-15 Tool Belt Set
Comfortable&Durable
Technical Data
| Model | TC-15 |
| Material | 1680D polyester fabric |
| Net Weight(kg) | 0.85kg |
| External Dimensions(mm) | 1230(L)*140(W)*260(H) |
| Packing | Carton: 10 pcs |
TC-51 Suspension Tool Rig
Professional & Heavy-duty
Technical Data
| Model | TC-51 |
| Material | 1680D polyester fabric |
| NetWeight(kg) | 2.11 kg |
| External Dimensions(mm) | 1310(L)*250(W)*750(H) |
| Packing | Carton: 4 pcs |
| PAGE/135-136 |
TB-1 TB-2 Tool Box
Professional & Heavy duty
| Model | TB-1 | TB-2 |
| Material | PP | PP |
| Interior dimensions | L450*W250*H220mm | L500*W320*H270mm |
| Thickness | 3.5mm | 3.5mm |
| Weight(empty) | 2.2 kg | 3.0kg |
| Waterproof | Yes | Yes |
| Dustproof | Yes | Yes |
| Packing | Carton: 6 pcs | Carton: 4 pcs |
Vacuum Pump Oil
Perfect Maintenance
| Model | WPO-1 | WPO-2 | WPO-3(For2F10 Only) |
| Kinematic Viscosity(40C) | 41.4-50.6mm²/s | 41.4-50.6mm²/s | 90-110mm2/s |
| Viscosity Index | 100 | 100 | 105 |
| Flash Point | 225°℃ | 225℃ | 268℃ |
| Pour Point | -10°C | -10°C | -16°℃ |
| Oil Type | Mineral Oil | Mineral Oil | Mineral Oil |
| Capacity | 500mL | 1L | 1L |
| Packing | Carton: 18 pcs | Carton: 16 pcs | Carton: 16 pcs |
BC-18 Series Corded Battery Converter
Corded Power, Unlimited Running
BA-1\~BA-11 Battery Adapter
Multiple Choice, Convenient Usage
MRS60/120 Programmable Charging Scale
Large Capacity, High Accuracy
| Model | MRS60 | MRS120 |
| Capacity | 60kg | 120 kg |
| Resolution | 4 g/0.2 oz/ 0.01lb | 8 g/0.4 oz/0.02 lb |
| Accuracy | 0.05% | |
| Display Units | kg/oz/lb | |
| Operating Temperature | 0°℃-50℃ (32°F-122F) | |
| Storage Temperature | -10°℃-60°C (14F-140°F) | |
| Power Supply | 3*3.7V Li-ion battery(18650,2400mAh)-Main body,2*1.5V AAA-Wireless Controller | |
| Working Time | 60 hours(full charge) | |
| Remark | Dutothuytritraouportationterms,wecannoticludeayLi-ionbatteyad charger, | |
| Accessories | M10 thread valve for refrigerant bottles | |
| Weight | 4.3 kgs | |
| Packing | Tool bag / Carton:3 pcs | |
MRS10 Hydrocarbon Programmable Charging Scale
Professional Design, Accurate Charging
Technical Data
| Model | MRS10 | MRS10K |
| Capacity | 10kg | |
| Resolution | 1g/ 0.1oz/ 0.002 b | |
| Accuracy | 0.05% | |
| Display Units | kg/oz/ lb | |
| Operating Temperature | 0℃-50℃ (32°F-122°F) | |
| Storage Temperature | -10℃-60℃C(14F-140F) | |
| Power Supply | 3*3.7VLi-ion battery (18650,2400mAh) | |
| Battery Life | 60hours (full charge) | |
| Remark | Duetaraed | |
| Accessories | (7/16-2Uale) | |
| Weight | SingleValve Manfold,2CimrseLocking Plir(HL-) | |
| Packing | 1.9 kg Tool bag / Carton: 5 pcs | 4.3 kg Tool box / Cartons: 3 pcs |
MDG-1 Single Digital Manifold Gauge
High Pressure Resistance Reliable&Durable
| Model | MDG-1 |
| Refrigerant Type | R22、R32、234y4,、R290、R4040、R4075、R407C、R410A、R427A、R434A、R442A、 |
| Battery | Built-in Li-ion Battery(3.7V/1500mAh) |
| Pressure Range | 0-800 psi (55 bar) |
| Interface | 1/4" SAE |
| Vacuum Range | -29.5-0 inHg |
| Accessories | Type-Cchargingcable |
| Packing | Tool bag/Carton: 5pcs |
MDG-2K Digital Manifold Gauge Kits
Anti-drop Design Accurate Detection
| Model | MDG-2K |
| RefrigerantType | R1234fy,R1234ze,R134a,R152a,R236fa,R245fa，R290,R32,,R404A,R407A,R407C,R407D,R407F,R407H, R410A,R417A,R422A,R422B,R422D,R424A,R426A,R427A,R428A,R434A,R437A,R438A,R442A,R448A, R449A,R450A,R452A,R452B,R453A,R454B,R454C,R455A,R502,R507A,R508A,R513A,R600a |
| Battery | 2*1.5V AAA batteries, Battery life:20oH (display with screen backlight off) |
| Interface | 3 * 1/4" SAE |
| Pressure Range | -14-800 psi (55 bar) |
| Units | Pressure: psi,kg/cm2,.kP,Mpa,bar,inhg |
| Accessories | Setof 3 RYB refrigeration hoses,2XAdapters (5/16"- 1/4") |
| Packing | Tool bag/ Carton: 6 pcs |
MG68-2 Manifold Gauge Kits
(Suit forR22,R32/R410a,R404A,R407C)
Integrated Design, Shockproof
Dual Valve Manifold Gauge Kits
LED Lighting, Shockproof
A calibration hole at the back
Adapters (5/16"MFL-1/4 "FFL)
Technical Data
| Model | MG68-3K | MG68-4K |
| Battery | Built-in Li-ion battery (3.7V/120mAh) | |
| Gauge Scale | R290，R32/R410A,R600a R22,R32/R410A | |
| Interface | 3 * 1/4" SAE | |
| Diameter | Φ60 | |
| Pressure | -30inHg-500psi,-30inHg-800psi | |
| Accessories | Set of 3 RYB refrigeration hoses,2*Adapters (5/16"-1/4") | |
| Packing | Tool bag/ Carton: 6 pcs | |
Single Valve Manifold Gauge
(Suit for R22,R410A,R32)
LED Lighting,Shockproof
MVG-1 Digital Vacuum Gauge
Large Display, High Accuracy
Technical Data
| Model | MVG-1 | |
| Measuring Range | 0-19000 microns | |
| Operating Temperature | -4°F~140°F(-20 °C~60°C) | |
| Interface | 1/4" SAE | |
| Accuracy | 1~10,000 microns:±10% of readings±10 microns 10,000~19.000microns:±20%of readings | |
| Resolution | 1-400microns 1micron 400-3000microns 10microns 3000-10000microns 100 microns | |
| Vacuum Units | 10000-19000microns 250 microns microns,mTorr, in/hg,Pa, Torr, KPa,mbarand psi | |
| Battery | Rechargeable lithium battery (1,0o0 mAh) | |
| Overload | 27.5 bar | |
| Packing | Carton: 24 pcs | |
| PAGE/147-148 |
MRT-1 Recovery Tool
MYF-1/2 Y-Fittings
Fast Recovery or Evacuation
