该页无缩略图
| 产品图 Product picture | 产品型号 Product number | 最大门宽（mm） Widthof door max (mm) | 最大门重（kg） Weight ofdoormax Dooropening speed (kg) | 开门速度 | 开启角度 Opening angle | 使用寿命 Passed durability test |
| AC-75D | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| AC-800D | 1000mm | 100kg | 二段 | 116°-360° | 500,000次/Cycles | |
| MA-7135 | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles | |
| MA-7300 | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| MA-2500 | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| MA-2600 | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles | |
| AC-8300K | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| AC-533N | 1200mm | 100kg | 二段 | 116° | 500.000次/Cycles |
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center and door-nippivot coincide witheach other. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration coveronthe floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 900 |
| 最大门t(kgor max(kg) | 90 |
| 开门速pning speed | |
| 开ngngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) 宽/Width Dimension of cement box(mm) | 256 100 |
| 高/Height | |
| 使用寿命 Passed durability test 500,000次/Cycles | |
地弹簧尺寸配件图 Assembling picture offloor hinge series
Modelno:AC-818G
豪华耐用型 Luxuriousanddurable
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlines and make floor spring pivot center and door-nip pivot coincide with eachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C) Placethe floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the holefo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最id门宽(mmmax(mm) | 800-950 |
| 最大g门重(kormxkg) | |
| 开门速pning speed | 115 二段 |
| 开启gngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 宽/Width 125 |
| 高/Height | 50 |
| 使用寿命 Passed durability test | 500.000次/Cycles |
地弹簧尺寸配件图 Assemblingpicture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor springpivot center anddoor-nippivot coincide witheachother. (B)Drill holesonthefloor according totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Placethe floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 800-1100 |
| 最大门重(kg) | |
| Weight of door max(kg) | 120 二段 |
| 开门速pning speed | |
| 开启角ngle | 116° |
| 长/Length 宽/Width | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 289.4 125 |
| 高/Height | 50 |
| 使用寿命 Passed durability test | 500,000次/Cycles |
地弹簧尺寸配件图 Assemblingpicture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor springpivot center anddoor-nippivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper and lower pivotcenter coincidewith each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring (A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand makefloor spring pivot centerand door-nippivot coincide witheach other. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screws at three directions.Make them vertical and the upper and lower pivot center coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring (A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor springpivot center anddoor-nippivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatchfloor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 900-1150 |
| 最大门t(kgor max(kg) | |
| 开门速eigsped | 150 二段 |
| 开ngngle | 116° |
| 长/Length 铁壳尺寸(mm) | |
| Dimension of cement box(mm) | 宽/Width 119 |
| 高/Height 58 | |
| 使用寿命 Passed durability test | 500.000次/Cycles |
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 1000-1350 |
| 最大门重(kg) Weight of door max(kg) | |
| 开门速pning speed | 180 二段 |
| 开pengle | 116° |
| 长/Length 宽/Width | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 124 |
| 高/Height | 58 |
| 使用寿命 Passed durability test | 500,000次/Cycles |
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 1000 |
| 最大门t(kgor max(kg) | 95 . |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) 宽/Width Dimension of cement box(mm) | 250 100 |
| 高/Height | |
| 使用寿命 Passed durability test | 500.000次/Cycles |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand makefloor spring pivot centerand door-nippivot coincide with each other. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Makethem vertical and the upper andlower pivot center coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decorationcover on thefloor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 1000 |
| 最大门t dormaxkg) | 105 |
| 开门速pning speed | |
| 开ngngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 276 宽/Width 108 |
| Dimension of cement box(mm) | |
| 使用寿命 500,000次/Cycles | 高/Height 40 |
地弹簧尺寸配件图 Assembling picture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor springpivot center and door-nippivot coincide witheachother. (B)Drill holesonthefloor according totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Placethe floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F)Adjustthespeedof door closing.
(G)Put the decoration cover onthe floor spring
Modelno:AC-84D 豪华耐用型 Luxuriousanddurable
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1100 |
| Width of door max(mm) | |
| 最大门重（kg) Weight of door max(kg) | 120 |
| 开门速eigsped | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 309 108 |
| 宽/Width Dimension of cement box(mm) | |
| 使用寿命 500.000次/Cycles | 高/Height 40 |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center anddoor-nippivot coincide witheachother. (B)Drillholes ontheflooraccording totheinstructions,Thesizesof theholesmusttightlymatch floor spring.
(C)Placethe floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration coveronthe floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 1000 |
| 最大门t(kgor max(kg) | 150 |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 285 宽/Width 82 |
| 高/Height 50 | |
| 使用寿命 Passed durability test | 500,000次/Cycles |
地弹簧尺寸配件图 Assembling picture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center and door-nip pivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Placethe floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门t(kgor max(kg) | 300 |
| 开门速enigsped | |
| 开启角度 Opening angle | 116°-360° |
| 长/Length | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 340 宽/Width 82 |
| 高/Height 60 | |
| 使用寿命 Passed durability test | 500,000次/Cycles |
地弹簧尺寸配件图 Assembling picture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivotcenterand door-nip pivot coincide witheach other. (B)Drillholesonthefloor according totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincidewitheachother.
(F)Adjust thespeedofdoorclosing.
(G)Put the decoration cover on the floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) 最大门重（kg) | |
| Weight of door max(kg) | 100 |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) 宽/Width | 222 105 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 55 |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center and door-nippivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them verticalandtheupper andlower pivotcenter coincidewith each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration coveronthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) 最大门重（kg) | |
| Weight of door max(kg) | 100 |
| 开门速pning speed | |
| 开ngngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 275 125 |
| 宽/Width Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 65 |
地弹簧尺寸配件图 Assemblingpicture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand makefloor spring pivot centerand door-nippivot coincide with each other. (B)Drillholes ontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门t(kgor max(kg) | 150 . |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 282 宽/Width 130 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 64 |
地弹簧尺寸配件图 Assembling picture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor springpivot center and door-nippivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesof theholesmusttightlymatchfloor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them verticalandtheupperandlower pivotcenter coincide with each other.
(F)Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) 最大门重（kg) | |
| Weight of door max(kg) | 120 |
| 开门速penigsped | |
| 开engngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 275 125 |
| 宽/Width Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 65 |
地弹簧尺寸配件图 Assembling picture offioor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholes ontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门重（kg) Weight of door max(kg) | 120 |
| 开门速enigsped | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 290 宽/Width 133 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 50 |
地弹簧尺寸配件图 Assemblingpicture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Drawlinesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholes ontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper andlower pivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
Modelno:AC-533N
豪华耐用型 Luxuriousanddurable
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) Width of door max(mm) | 1200 |
| 最大门t(kgor max(kg) | 150 |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) Dimension of cement box(mm) | 322 宽/Width 90 |
| 高/Height | |
| 使用寿命 Passed durability test | 500,000次/Cycles |
地弹簧尺寸配件图 Assemblingpicture offloor hinge series
非标淋浴房安装图
Nonstandardshowerroom installationdiagram
说明：1.以下淋浴房最大承重为：65KG
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3．用户订购导轨时，我厂不包导轨钻孔，孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum instalation length is.1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, our factory does not pack guideway holes, and the holes need to be processed during construction. 4.the fittings of our factory are only suitablefor clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.eachsection can be installed 90 degrees double open,90 degrees single open and 180 degrees.
30×10方管带防跳杆平面安装图
30X10 installation of square pipe with jumping-proof pillar
30×10方管带防跳杆截面安装图
30X10Sectional installation of squarepipe with jumping-proof pillar
非标淋浴房安装图
Nonstandard shower roominstallationdiagram
说明：1.以下淋浴房最大承重为：65KG
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3．用户订购导轨时，我厂不包导轨钻孔孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum installation length is.1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, our factory does not pack guideway holes, and the holes need to be processed during construction. 4. the fittings of our factory are only suitable for clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.each section can be installed 90 degrees double open, 90 degrees single open and 180 degrees.
30X10方管带防跳杆平面安装图
30X10 installation of square pipe with jumping-proof pillar
30×10方管带防跳杆截面安装图
30X10Sectional installation of square pipe with jumping-proof pillar
非标淋浴房安装图
Nonstandardshowerroom installationdiagram
说明：1．以下淋浴房最大承重为：65KG
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3．用户订购导轨时，我厂不包导轨钻孔，孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum installation length is.1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, our factory does not pack guideway holes, and the holes need to be processed during construction. 4. the fittings of our factory are only suitable for clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.each section can be installed 90 degrees double open, 90 degrees single open and 180 degrees.
30×10方管带防跳杆平面安装图
30X10 installation of square pipe with jumping-proof pillar
非标淋浴房安装图
Nonstandard shower room installationdiagram
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3.用户订购导轨时，我厂不包导轨钻孔，孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
说明：1．以下淋浴房最大承重为：65KG
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum installation length is.1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, our factory does not pack guideway holes, and the holes need to be processed during construction. 4.the fittings of our factory are only suitablefor clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.eachsection can be installed 90 degrees double open, 90 degrees single open and 180 degrees.
25空心管带防跳杆平面安装图
25 hollow duct tape the jump bar plane installation drawing
非标淋浴房安装图
说明：1．以下淋浴房最大承重为：65KG
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3．用户订购导轨时，我厂不包导轨钻孔，孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
Nonstandardshowerroom installationdiagram
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum installation length is 1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, ourfactory does not pack guideway holes, and the holes need to be processed during construction. 4. the fitings of our factory are only suitable for clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.eachsection can be installed 90 degrees double open, 90 degrees single open and 180 degrees.
25空心管带防跳杆平面安装图
25 hollow duct tape thejump bar plane installation drawing
非标淋浴房安装图
说明：1．以下淋浴房最大承重为：65KG
2.180°最大安装长度为1.8米，90°双门单边最大安装长度1.0米
3．用户订购导轨时，我厂不包导轨钻孔，孔需要施工时加工
4.本厂配件只适合夹8mm-10mm玻璃
5.玻璃开孔是，要严格按照安装图中的尺寸开孔
6.每款都可以安装90°双开，90°单开和180°
Nonstandardshowerroom installationdiagram
Instructions:1.the largest load of shower room is 65KG 2.180 degree maximum installation length is 1.8 meters, 90 degree double door unilateral maximum installation length 1 meters. 3. when users order the guideway, ourfactory does not pack guideway holes, and the holes need to be processed during construction. 4.the fitings of our factory are only suitable for clamping 8mm-10mm glass. 5.glass openings are strictly perforated according to the size of the installation drawings. 6.each section can be installed 90 degrees double open, 90 degrees single open and 180 degrees.
25空心管带防跳杆平面安装图
25 hollow duct tape the jump bar plane installation drawing
Glass door hanging wheel Model no:AC-A8001
Function // Size
Necessary fitting:
Glass door hanging wheel Model no:AC-A8002 Function //Size
