该页无缩略图
Paint color油漆色系
Paint effect油漆效果
Material application
Performance characteristics性能特点
最节省场时空间的喷涂线配置，立体干燥房往空间高度方向发展，不占用场地的长度，适用于需要长时间干燥的油漆。
兼顾油漆的最佳流平性能，流水式出来后达到全干状态，即可包装。
The most saving time and space spraying line configuration, three-dimensional drying room to the direction of space height, does not take up the length of the field,take into account the best leveling performance of paint. For a long time dry paint, water come out to dry state, you can package.
B1 Mito
单臂自动喷涂室 Single-arm automatic spraying room
适用于小批量生产，频繁更换油漆喷涂作业。
For small batch production, frequent replacement of paint spraying operations.
B2 Facile B3 Easy
标准双臂自动喷涂室 Standard arms automatic spraying room
适用于中等批量生产，自动化连续喷涂作业。
For medium-volume production, automated continuous spraying operations.
B5 Roctre
宽体双臂自动喷涂室 Wide-body arms automatic spraying room
适用于高质量、高端效果的自动化喷涂作业。
For high-quality, high-end effects of automated spraying operations.
07
1300mm
Automatic spraying Line
自动喷漆线
产能：1500m²
总功率：143kw
用气量: 2.5 m²/min
机器尺寸：46m×9.5m×5.4m
承重要求：800kg/m²
替代人工喷涂：12人
1 Paint effect油漆效果
Paint color油漆色系
I Material application
Performance characteristics性能特点
最节省场时空间的喷涂线配置，立体干燥房往空间高度方向发展，不占用场地的长度，适用于需要长时间干燥的油漆。
兼顾油漆的最佳流平性能，流水式出来后达到全干状态，即可包装。
The most saving time and space spraying line configuration, three-dimensional drying room to the direction of space height, does not take up the length of the field,take into account the best leveling performance of paint. For a long time dry paint, water come out to dry state, you can package.
B1 Mito
单臂自动喷涂室 Single-arm automatic spraying room
适用于小批量生产，频繁更换油漆喷涂作业。
For small batch production, frequent replacement of paint spraying operations.
B2 Facile B3 Easy
标准双臂自动喷涂室 Standard arms automatic spraying room
适用于中等批量生产，自动化连续喷涂作业。
For medium-volume production, automated continuous spraying operations.
B5 Roctre
宽体双臂自动喷涂室 Wide-body arms automatic spraying room
适用于高质量、高端效果的自动化喷涂作业。
For high-quality, high-end effects of automated spraying operations.
08
2500mm
Automatic spray paint line for wooden door 木门自动喷漆线
Paint effect油漆效果
Paint color油漆色系
Automatic spraying line - door自动喷漆线 - 木门
Material application材质应用
Performance characteristics
性能特点
配置两台喷漆机和一台自动翻面机，双面一次完成喷涂，可以喷涂PU漆、NC漆和水性漆，是目前自动化程度最高、产量最大、应用最稳定的设备。
Set up two spraying machines and an automatic turner,accomplished spraying boon sides once time ,PU,NC and water-based paint can be sprayed. The machines, are the highest automatism. The largest output. The most stable application equipment at present
采用往覆式喷涂模式，可以实现每分钟2张门扇的高速生产。
配置带框架、悬空式的门扇支撑和翻转。
Equipped wih hang-type supporting and turnning for door.
Adopted with reciprocating spraying mode and completed high-speed production that finished 2 doors every minute.
300mm
Automatic spraying line-linear
线条自动喷漆线
产能：2600pcs/8h
总功率：63kw
用气量：1 m²/min
机器尺寸：12m×9m×2.3.5m
承重要求：400kg/m²
替代人工喷涂：20人
Capacity:2600pcs/8h
total power:63kw
gas consumption:1m²/min
machine size:12m ×9m× 2.35m
bearing:400kg/m²
instead of staff:20 people
Paint color油漆色系
I Paint effect油漆效果
Automatic spraying line - Linear 自动喷漆线-线条
Material application材质应用
Performance characteristics
性能特点
适用于门框线、画框、舍槽企口板、门窗配件、家具配件、踢脚线、地板、塑钢型材和木塑线条等条型工件的三个表面，针对UV和水性油漆等各种油漆进行连续自动喷漆。
Suitable for all kinds of paint such as door frame, frame, tongue slot, door and window accessories, furniture accessories, baseboard, floor, steel profile and wood-plastic line for uv and water-based paint continuous automatic painting.
横向流平干燥隧道 Horizontal flash-off drying tunnel
自动喷枪标准配置采用原装进口日本岩田自动空气喷枪，喷漆室辊涂采用单边悬挂结构，配刮刀。
Automatic spray gun equipped with standard imported Japanese Iwata automatic air spray gun, spray booth roller coating with unilateral suspension structure, with scraper.
通过横向平移转接，能够实现3分钟以上的长时间流平。
by horizontal shift and change over, reached more than 3 minute long time flash-off.
Equipment applications设备应用
Spraying equipment 喷漆设备
Drying equipment 干燥设备
Dust removal equipment 除尘设备
Automation equipment 自动化设备
B1 Mito
1300mm Automatic spraying machine-Reciprocating, single arm
1300mm自动喷漆机-往覆、单臂
型号Model:MF7413×1/DMF7413×1/DS
Performance characteristics
性能特点
适用于实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品、装饰板、硅酸钙板、玻镁板等板式工件的平面（侧边少量涂到），针对UV、PU、AC、NC、水性漆和氟碳漆等，进行高质量效果连续自动喷漆，实现节能、环保和减少人工，提高产品质量和生产效率。
Suitable for plate workpiece's surface of solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware,decorative board,calcium silicate board,glass magnesium board etc.with high quality effect to spray paint continuously and automatically on UV,PU,AC,NC,WB and fluorocarbon paint,to realized saving energy,pro-environment,saving labour and improving products quality and production efficiency
单臂自动喷涂室
Single-arm automatic spraying room
适用于水性漆、PU漆小批量生产，频繁更换油漆喷涂作业。
For water-based paint, PU paint small batch production, frequent replacement paint spraying operations.
I Technical parameters
常规参数
加工速度:1-4m/min
Processing speed: 1-4m/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：12kw
Total power: 12kw
B2 Facile B3 Easy
1300mm Automatic spraying machine-Reciprocating, Chain rod or belt feeding, dry style
1300mm自动喷漆机-往覆、皮带输送、干式
型号:MH7413×2/D MH7413×2/D/K
Performance characteristics
性能特点
适用于实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品等板式家具工件的平面和四个侧边，针对UV、PU、AC、NC和水性漆等，进行高质量效果连续自动喷漆，实现节能、环保和减少人工，提高产品质量和生产效率。
Suitable for surface and four sides of solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware etc.with high quality effect to spray paint continuously and automatically on UV,PU,AC,NC and water based paint,to realized saving energy,proenvironment,savinglabour and improving products quality and production efficiency.
标准双臂自动喷涂室 Standard arms automatic spraying room
适用于中等批量生产，自动化连续喷涂作业。
For medium-volume production, automated continuous spraying operations.
I Technical parameters
常规参数
加工速度：1-6m/min
Processing speed: 1-6m/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：15kw
Total power: 15kw
B2 Facile B3 Easy
1300mm Automatic spraying machine-Reciprocating, belt feeding, water style
1300mm自动喷漆机-往覆、皮带输送、水式
Performance characteristics
性能特点
适用于实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品等板式家具工件的平面和四个侧边，针对UV、PU、AC、NC和水性漆等，进行高质量效果连续自动喷漆，实现节能、环保和减少人工，提高产品质量和生产效率。
Suitable for surface and four sides of solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware etc.with high quality effect to spray paint continuously and automatically on UV,PU,AC,NC and water based paint,to realized saving energy,proenvironment,savinglabour and improving products quality and production efficiency.
标准双臂自动喷涂室 Standard arms automatic spraying room
适用于中等批量生产，自动化连续喷涂作业。
For medium-volume production, automated continuous spraying operations.
采用先进自主研发的油漆高效回收系统，油漆回收效率高达99.8%，将节省成本做到极致！
Using advanced self-developed paint efficient recovery system, paint recycling efficiency of up to 99.8%, will be the ultimate cost savings!
I Technical parameters常规参数
加工速度：1-6m/min
Processing speed: 1-6m/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：22kw
Total power: 22kw
B5 Roctre
1300mm Automatic spraying machine-reciprocating,blelt feeding,wide-body
1300mm自动喷漆机-往覆、皮带输送、宽体
Performance characteristics
性能特点
适用于实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品等板式家具工件的平面和四个侧边，针对UV、PU、AC、NC和水性漆等，以更高质量、更细腻的表面效果进行连续自动喷漆，实现节能、环保和减少人工，提高产品质量和生产效率。
Suitable for surface and four sides of solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware etc.with the higher quality and the more delicate effect to spray paint continuously and automatically on UV,PU,AC,NC and water based paint,to realized saving energy,pro-environment,saving labour and improving products quality and production efficiency.
宽体双臂自动喷涂室 Wide-body arms automatic spraying room
油漆回收系统 Paint recycling system
适用于大批量生产，自动化高效率喷涂作业。
For high-volume production, high-efficiency automated spraying operations.
采用先进自主研发的油漆高效回收系统，油漆回收效率高达99.8%， 将节省成本做到极致!
Using advanced self-developed paint efficient recovery system, paint recycling efficiency of up to 99.8%, will be the ultimate cost savings!
I Technical parameters
常规参数
加工速度:2-9m/min
Processing speed: 2-9m/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure:0.6mpa
总功率：18kw
Total power: 18kw
300mm Automatic spraying machine-linear 自动喷漆机- 线条
Performance characteristics
性能特点
适用于门框线、画框、舌槽企口板、门窗配件、家具配件、踢脚线、地板、塑钢型材和木塑线条等条型工件的三个表面，针对PU、NC、PVC、UV和水性油漆等各种油漆进行连续自动喷漆。
Suitable for door frame, picture frame, floor board, flooring angular line,WPC etc. It can cover 3 sides of workpieces wish PU,NC,PVC,UV & Water base by auto spraying.
辊筒式输送 Roller feeding
自动喷枪标准配置采用原装进口日本岩田自动空气喷枪，喷漆室辊辊涂采用单边悬挂结构，配刮刀。
Automatic spray gun equipped with standard imported Japanese Iwata automatic air spray gun, spray booth roller coating with unilateral suspension structure, with scraper.
I Technical parameters
常规参数
加工速度:5-20m/min
Processing speed: 5-20m/min
加工宽度：200mm
Processing width: 200mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：5kw
Total power: 5kw
UV dryer-linear,vertical linear
UV固化机- 立体、线条
Performance characteristics
性能特点
适用于门框、门线、画框、窗帘架、舌槽企口板、门窗配件、家具配件、地角线、地板等条状异形工件进行UV油漆喷涂后四个表面的油漆固化。
Machines designed for the application of UV paint's drying for door frame,linear door workpiece,fruniture linear workpiece,skirting board,floor board and so on.
立体式UV固化系统
Vertical UV drying system
采用大灯UV灯箱结构，并配大抽风机，有温度控制和显示；采用高能量混合元素灯，反射罩采用聚焦式铝合金灯罩。
The use of headlight UV light box structure, and with a large exhausted fan, temperature control and display; the use of high-energy mixed-element lamps, reflectors using focus aluminum shade.
I Technical parameters
常规参数
加工速度:5-20m/min
Processing speed: 5-20m/min
加工宽度：200mm
Processing width: 200mm
加工厚度：5-80mm
Processing thickness: 5-80mm
总功率：36kw
Total power: 36kw
UV dryer-verticalUV固化机 - 立体
Performance characteristics
性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘等工件进行UV立体涂装后的六个表面的油漆固化，包括背面。
Machines designed for the application of UV paint's drying for panel furniture,door,solid wood composite floor board,cabinet side board,artwork, bamboo window curtain and so on.It can drying 6 sides of workpiece.
立体式UV固化系统 Vertical UV drying system
采用大灯UV灯箱结构，并配大抽风机，有温度控制和显示；采用高能量混合元素灯，反射罩采用聚焦式铝合金灯罩，特殊的UV干燥系统，能使油漆从内到外的氧阻分层固化，使油漆固化后达到高效砂光、容易砂光的临界效果。
UV固化机 UV dryer
The use of headlight uv light box structure, and with a large exhausted fan, temperature control and display; the use of high-energy mixed-element lamps, reflectors using focus aluminum shade,special uv drying system, the paint can be cured from the inside out of the oxygen barrier layer curing, paint curing to achieve efficient sanding, easy to sanding the critical effect.
能量方式：电子电源，LED，变压器；
电子电源：容易实现光能的瞬时转换，在生产线上实现弱功率等待，节能；
LED：紫外线成份高，产生多余热能少，也称为冷光源，总耗电量少，节能；
变压器：通用易控制，更换维修简单，配件成本低。
I Technical parameters
Energy method: electronic power, LED, transformer.
Electronic power: it is fast to change the luminous energy, so that it can shorten the weak power time, saving energy .
LED : because of higher ultraviolet ray and less heat, it is called cold light source, with consuming less power and saving energy .
Transformer : common use, easy control and maintenance and low spare part cost
常规参数
加工速度:2-10m/min
加工宽度：1300mm
加工厚度：5-80mm
总功率：75kw
Processing speed: 2-10m/min Processing width: 1300mm Processing thickness: 5-80mm Total power: 75kw
300mm
Flash-off drying tunnel-linear
流平干燥隧道-线条
型号Model:MF6203×60/H MF6203×90/H MF6203×120/H
Performance characteristics
性能特点
适用于门框线、画框、舌槽企口板、门窗配件、家具配件、踢脚线、地板、塑钢型材和木塑线条等长条型且规格统一工件的三个表面，针对PU、NC、UV和水性漆自动喷漆后的油漆流平和干燥。
Machines designed for the application of UV paint's flash-off or solvent paint's drying for door frame,window's parts,family fruniture,flooring angular line,floor board,WPC line and so on.
加热恒温恒湿系统
Heating constant temperature and humidity system
加热的方式可选择：红外灯管、空气能、热水和蒸气；可选配加湿和除湿系统，组成可以干燥各种油漆的干燥系统。
Heating methods are available: infrared lamp, air, hot water and steam; optional humidification and dehumidification system, composed of drying system can paint a variety of drying.
I Technical parameters
常规参数
加工速度:5-20m/min
Processing speed:5-20m/min
加工宽度：200mm
Processing width:200mm
加工厚度：5-50mm
Processingthickness:5-50mm
加热能耗：5万大卡
Heating consumption:50 thousand Kcal
压缩空气：0.2m3/min
Compressed air:0.2m3/min
机器尺寸：6-12m×3.5m×2.3m
Machine size:6-12m× 3.5m×2.3m
总功率：7kw
Total power:7kw
1300mm
Hot air drying tunnel
Performance characteristics
性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、铍镁板、水泥纤维板等工件，进行自干型油漆涂装后的快速干燥。通用色漆和水性底面漆。
It is suitable for the fast drying after the dry-type paint coating on the slab furniture, plane door, parquet, cabinet side board, crafts, bamboo curtain, calcium silicate board, beryllium magnesium board, cement fiber board and other workpieces. Universal paint and water-based primer.
热风干燥系统Hot air drying system
高速风风刀 Scraper with high speed wind
可以选择空气能、热水和蒸汽三种不同的加热方式，通过风刀、喷嘴将高温气流喷射到工件的漆膜表面，快速带走水份达到高效干燥。
You can choose air, hot water and steam three different heating methods, through the air knife, nozzle high temperature air jet to the surface of the workpiece paint, quickly take away the water to achieve efficient drying.
提高隧道内风速，加速干燥，尤其适合水性涂料干燥 Increase the wind speed in the tunnel,accelerate drying especially for water based paint.
I Technical parameters
常规参数
加工速度：4-16m/min
Processing speed:4-16m/min
加工宽度：1250mm
Processing width:1250mm
加工厚度：5-80mm
Processing thickness:5-80mm
加热能耗：8万大卡
Heating consumption:80 thousand Kcal
压缩空气：0.1m3/min
Compressed air:0.1m3/min
机器尺寸：12m×2.35m×3m
Machine size:12m ×2.35m×3m
总功率：17.5kw
Total power:17.5kw
1300mm
Cold infrared drying tunnel
冷红外干燥隧道
型号:MF6213×120/CIR/LC
Performance characteristics
性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、镀镁板、水泥纤维板等平面工件进行水性漆涂装后，高质量的漆面流平，达到油水分离的作用。
Machines designed for Plane workpiece for water-based paint, high-quality paint flow leveling, oil and water to achieve the role of separation for panel furniture,door,solid wood composite floor board,cabinet side board,artwork,bamboo window curtain,calcium silicate board,glassmagnersium board,fiber cement board and so on.
冷红外干燥系统Hot air drying system
自动加温系统Automatic heating system
采用冷红外辐射加热系统，将热量隔离，使水性漆中的水份在短时间内吸热膨胀提升，达到油水分离的漆面效果。
确保在流平过程中，漆膜表面不会风干结皮 Make sure the surface of paint film not air-dry during flash-off.
The use of cold infrared radiation heating system, the heat insulation, water-based paint in a short period of time to absorb heat expansion to enhance oil and water to achieve the effect of paint separation.
I Technical parameters
常规参数
加工速度:2-10m/min
Processing speed:2-10m/min
加工宽度：1250mm
Processing width:1250mm
加工厚度：5-80mm
Processing thickness:5-80mm
机器尺寸：12m×1.76m×2.2m
Machine size:12m×1.76m×2.2m
总功率：25kw
Total power:25kw
1300mmFlash - off drying tunnel流平干燥隧道
1 Performance characteristics性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、铍镁板、水泥纤维板等平面工件进行UV涂装后表面流平和溶剂型涂料的表干。
Machines designed for the application of UV paint's flash-off or solvent paint's drying for panel furniture,door,solid wood composite floor board,cabinet side board,artwork,bamboo window curtain,calcium silicate board,glassmagnersium board,fiber cement board and so on.
I Technical parameters常规参数
加工速度：2-10m/min
加工宽度：1250mm
加工厚度：5-80mm
机器尺寸：12m×1.8m×2m
总功率：20kw
Processing speed:2-10m/min Processing width:1250mm Processing thickness:5-80mm Machine size:12m ×1.8m ×2m Total power:20kw
型号:MF6213×60/D/IR MF6213×120/D/IR MF6213×60/L/IR MF6213×120/L/IRMF6213×60/D MF6213×120/D
I Performance characteristics性能特点
适用于板式家具、平面门、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、镀镁板、水泥纤维板等平面工件进行水性漆涂装后快速脱水和油漆干燥。
Machines designed for the application of water basedpaint's water evaporation and paint drying ,which is suitable for panel furniture, door, kitchen cabinet, artwork, baboo window curtain, calcium silicate board, glassmagnesium board,fiber cement board etc.
加工宽度：1250mm
1250mm
加工厚度：5-80mm
5-80mm
机器尺寸：12m×1.8m×2.6m
24m×1.8m×2.6m
总功率：65kw
90kw
Processing speed:2-10m/min 2-10m/min Processing width:1250mm 1250mm Processing thickness:5-80mm5-80mm Machine size:12m×1.8m×2.6m 12m×1.8m×2.6m Total power:65kw 90kw
型号:MF6213×120/D/WB MF6213×240/D/WB
1300mm Vertical drying oven-6 layers 立体式干燥房-六层
1 Performance characteristics
性能特点
利用机器上部空间，采用立体式结构，适用于规格较为统一的实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品、装饰板、等板式工件，进行自动化喷漆后3-6分钟的立体流平，减少流水式干燥隧道的长度占用，节少地场。
Suitable for uniform specification solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware decorative board etc.which will be flash-off for 3-6 min after has been automatic sprayed paint.saving the length of venue greatly.
立体干燥系统Vertical drying room
可选配电加热、空气能、蒸汽、热水和导热油集中加热。
Selecting one of ways from electric, air energy, steam ,hot water and conduction oil heating .
I Technical parameters
常规参数
加工速度：1-6m/min
Processing speed:1-6m/min
加工宽度：1250mm
Processing width:1250mm
加工厚度：50mm
Processingthickness:50mm
立体层数：4-6层
Number oflayers:4-6layers
加热能耗：6万大卡
Heating consumption:60 thousand Kcal
压缩空气：0.1m³/min
Compressed air:0.1m³/min
机器尺寸：7.9m×2.42m×3.3m
Machine size:7.9m ×2.42m×3.3m
总功率：13kw
Total power:13kw
1300mm
Vertical drying oven
立体式干燥房
型号:MF6213×2/35×36/LTMF6213×4/35×68/LTMF6213×2/55×36/LT MF6213×2/55×36/LT/DMF6213×4/55×68/LT MF6213×4/55×68/LT/D MF6213×4/55×88/LT MF6213×4/55×120/LT
I Performance characteristics
性能特点
利用机器上部空间，采用立体式结构，适用于规格较为统一的实木家具、实木复合门、美式橱柜、套房家具、卫浴柜、展示柜、工艺品、装饰板、硅酸钙板、玻镁板等板式工件，进行自动喷漆后的超长时间（30-120分钟）待干，实现在线连续干燥作业。喷漆后的长时间待干能够兼顾流平性、光滑性和漆膜干燥的最优性能。
Suitable for uniform specification solid wood furniture,solid wood composite door,America-type cabinet,suite furniture,bathroom cabinet,display case,artware,decorative board,calcium silicate board,glass magnesium board etc.which will take a long time(30-120min) to dry off after has been automatic sprayed paint,realized the continuous drying on line.it takes the superior performance of levelling property,gliding property and paint film drying to dry off for a long time.
立体干燥系统
Vertical drying room
可选配电加热、空气能、蒸汽、热水和导热油集中加热。
Selecting one of ways from electric,air energy,steam ,hot water and conduction oil heating .
I Technical parameters
常规参数
加工速度：1-6m/min
1-6m/min
加工宽度：1250mm
1250mm
加工厚度：50-80mm
50-80mm
立体层数：36层
加热能耗：20万大卡
68层
压缩空气：0.2m3/min
机器尺寸：6.7m×4.4m×5.4m
总功率：21kw
35万大卡
0.4m3/min
6.72m×8.3m×5.3m
40kw
Processing speed:1-6m/min
Processing width:1250mm
Processing thickness:50-80mm
Number of layers:36layers
Heating consumption:20 thousand Kcal
Compressed air:0.2m³/min
Machine size:6.7m×4.4m ×5.4m
Total power:21kw
1-6m/min
1250mm
50-80mm
68layers
35thousand Kcal
0.4m³/min
6.72m×8.3m×5.3m
40kw
1300mmDust cleaner粉尘清除机
Performance characteristics性能特点
适用于装饰板、硅酸钙板、玻镁板、水泥纤维板、玻璃等大规格板式工件的平面部份，针对PU、水性多彩漆和氟碳漆进行连续自动喷漆，提高产品质量和生产效率，同时减少油漆的损耗，节省成本。
Machines designed for connect different processing machine and cleaning workpiece.It suitale for panel furniture, door,solid woodcomposite floor board cabinet side board,artwork,bamboo window curtain,fiber cement board/calcium silicate board, glass magnisium board etc.
I Technical parameters常规参数
加工速度:2-10m/min加工宽度：1300mm加工厚度：5-80mm总功率：1.5kw
型号:MF9213×1
Processing speed: 2-10m/min Processing width: 1300mm Processing thickness: 5-80mm Total power: 1.5kw
300mmDust cleaner粉尘清除机
I Performance characteristics性能特点
适用于装饰板、硅酸钙板、玻镁板、水泥纤维板、玻璃等大规格板式工件的平面部份，针对PU、水性多彩漆和氟碳漆进行连续自动喷漆，提高产品质量和生产效率，同时减少油漆的损耗，节省成本。
Machines designed for connect different processing machine and cleaning workpiece.It suitale for panel furniture, door,solidwood composite floor board cabinet side board,artwork,bamboo window curtain,fiber cement board/calcium silicate board, glass magnisium board etc.
I Technical parameters常规参数
加工速度:5-20m/min加工宽度：300mm加工厚度：5-80mm总功率：0.64kw
型号：MF9203×1
Processing speed: 5-20m/min Processing width: 300mm Processing thickness: 5-80mm Total power: 0.64kw
1300mmDust cleaner粉尘清除机
Performance characteristics
性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、玻镁板、水泥纤维板等板式工件，配套连线作业时进行砂光后粉尘清除或油漆涂装前除尘。
Machines designed for cleaning dust after sanding or before next coating.It suitable for panel furniture ,door,solid wood composite floor board cabinet side board,artwork,bamboo window curtain,fiber cement board/calcium silicate board,glass magnisium board,etc.
毛刷除尘结构Brush dust structure
两组毛刷采用植物纤维棕刷，毛刷高低调节采用手动蜗轮箱调节。
Two groups of brushes with plant fiber brown brush, brush height adjustment using a manual worm gear box adjustment.
I Technical parameters
常规参数
加工速度:2-6m/min
Processing speed: 2-6m/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processing thickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：1.5kw
Total power:1.5kw
1300mm
Auto loading&unloading machine
自动上下料机
型号:MF7313×2MF7313A×2 MF7313×3MF7313A×3
Performance characteristics
性能特点
适用于板式家具、平面门、实木复合地板、橱柜侧板、工艺品、竹木窗帘、硅酸钙板、玻镁板、水泥纤维板等板式工件，配套连线作业时进行自动上料或下料。
Machines designed for loading workpiece for processing or unload it after processing.It suitable for panel furniture ,door,solid wood composite floor board cabinet side board,artwork,bamboo window curtain,fiber cement board/calcium silicate board,glass magnisium board,etc.
真空吸盘系统
Vacuum suction system
采用德国SCHMALE吸盘机真空发生器；升降和移动采用宽为100mm同步带结构，为减速电机驱动，变频调节。
Germany SCHMALE sucker vacuum generator; lifting and moving the width of 100mm with a belt structure for the motor drive, frequency control.
I Technical parameters
常规参数
加工速度：4-6pic/min
Processing speed: 4-6pic/min
加工宽度：1300mm
Processing width: 1300mm
加工厚度：5-80mm
Processingthickness: 5-80mm
空气压力：0.6mpa
Air pressure: 0.6mpa
总功率：9kw
Total power: 9kw
1300mmAuto turner自动翻面机
