SIPHONS

Siphon furnance cooling tube 22mm rosette 70mm Patt No.: CDC2010101 1-1/4" × 32mm

Siphon half cased Patt No.: CDC2020101 1-1/4" × 32mm

Patt No.: 3CEA101 1-1/4" × 32mm Siphon

Patt No.: 3CEA102 1-1/2" × 42mm Siphon

Patt No.: 3CEA201 1-1/4" × 32mm Contemporary Siphon

Patt No.: 3CEA202 1-1/2" × 42mm Contemporary Siphon

Patt No.: 3CEA203 1-1/4" × 32mm Siphon side-pipe with O-ring

Patt No.: 3CEA204 1-1/4" × 32mm Siphon

P-trap, chrome plated Patt No.: CDC2030102 1-1/4" × 32mm

Pipe trap for bidet, chrome plated Patt No.: CDC2040102 1-1/4" × 32mm

Patt No.: D1147
Spring Basin Waste with Flat Plug
1-1/4" BSP × 63mm
Flange × 63mm Flat
Plug × 85mm Solid tail
Washers and Plastic Back Nut
With a Chain Hole Stopper
Patt No.: D3141
Spring Bath Waste with Flat Plug
1-1/2"BSP
73mm Flange
73mm Flat
Plug × 75mm Slotted tail
Washers and Plastic Back Nut
Patt No.: D3105
Spring Bath Waste
with Brass Dome Plug
Slotted Body
1-1/2" BSP
73mm Flange
73mm tail
Patt No.: D3106
Spring Bath Waste
with Brass Dome Plug
Solid Body
1-1/2" BSP
73mm Flange
33mm tail
Patt No.: D1801
Basin Waste
with Brass Flip Plug Solid Body
1-1/4" BSP
60mm Flange
85mm tail

Patt No.: 3CAA1 Basin Wastes Plastic 1-1/4" × 60mm

Patt No.: D1141
Spring Basin Waste with Flat Plug
1-1/4" BSP × 63mm
Flange × 63mm Flat
Plug × 85mm Slotted tail
Washers and Plastic Back Nut
With a Chain Hole Stopper
Patt No.: D1106
Spring Basin Waste
with Brass Plug
Solid Body
1-1/4" BSP
60mm Flange
65mm tail
Patt No.: D3105C
Spring Bath Waste with Brass
Flat Plug
Slotted Body
1-1/2"BSP
73mm Flange
73mm tail
Patt No.: D3109
Pull & Push Bath Waste
Solid Body
1-1/2" BSP
73mm Flange
33mm tail
Patt No.: D1802
Basin Waste with Brass Flip
Plug Slotted Body
1-1/4"BSP
60mm Flange
85mm tail
Patt No.: 3CAA2
Basin Wastes
Brass Body
BS3380
1-1/4" × 60mm, CP or PVD

ACS

Patt No.: D1100
Basin Waste with Brass Plug
1-1/4" BSP
60mm Flange
85mm tail

Patt No.: D1300 Basin Pop Up Waste

Patt No.: D3100
Bath Waste with Poly Plug
1-1/2"BSP
73mm Flange
35mm tail
Patt No.: D3102
Bath Waste with Brass Plug
1-1/2"BSP
73mm Flange
73mm tail

Patt No.: D1102 Plastic Basin Waste with Stainless Steel Flange, Poly Plug 1-1/4"BSP 60mm Flange 85mm tail

Patt No.: D1101
Basin Waste with Poly Plug
1-1/4"BSP
60mm Flange
85mm tail

Patt No.: D1302 Basin Pop Up Waste

Patt No.: D3101
Bath Waste with Brass Plug
1-1/2"BSP
73mm Flange
35mm tail
Patt No.: D3103
Bath Waste with Poly Plug
1-1/2" BSP
73mm Flange
73mm tail
Patt No.: D3801
Bath Waste with Flip Plug
Solid Body
1-1/2" BSP
70mm Flange
27mm tail

ACS

WASTES

Patt No.: D1202
Economy Basin Combination
Overflow
Stainless Steel Basin Flange
Poly Plug
ABS Overflow Face

Patt No.: 3CBA1 Basin Combined Wastes Basin Comb. Waste Plastic Body 1-1/2" × 70mm × 450mm

Patt No.: D3207A
Brass Spring Bath Combination
Overflow Brass Dome Plug Spring
Waste
Brass Overflow
Patt No.: D3208
Economy Retainer Bath Waste
Brass Bath Flange
Brass Plug
Brass Overflow Flange
Patt No.: D3330
Economy Pop Up Bath Waste
Brass Knob
Brass Bath Flange & Plug 60cm
Cable

Patt No.: 3CCA1 Sink Combined Wastes Sink Comb. Waste Plastic Body 1-1/2"×85mm × 270mm

Patt No.: D1204
Economy Basin Combination Overflow
Brass Basin Flange
Brass Plug
ABS Overflow Face
Patt No.: D3200
Economy Bath Combination
Overflow Stainless Steel Bath Flange
Poly Plug
ABS Overflow Face
Patt No.: D3207B
Brass Spring Bath Combination
Overflow Brass Flat Plug Spring Waste
Brass Overflow

Patt No.: D3209 Luxury Retainer Bath Waste All Brass Components

Patt No.: D3340
Long Cable Economy
Pop Up Bath Waste
Brass Knob
Brass Bath Flange & Plug
120cm Cable

RADIATOR VALVES

THERMOSTATIC RADIATOR VALVES

THERMOSTATIC MIXING VALVES

AIR VENTS

AIR SEPARATOR

DIRT SEPARATORS

BOILER DRAIN

SAFETY RELIEF VALVES

STATIC BALANCING VALVES

PRESSURE INDEPENDENT CONTROL VALVE(PICV)

DYNAMIC BALANCING THERMOSTATIC VALVES

INCLINED PRESSURE REDUCING VALVES

PISTON PRESSURE REDUCING VALVES

AUTOMATIC PISTON FILLING UNIT

MANIFOLDS

SENSOR PROBE BALL VALVES

AUTO BY-PASS VALVES

MANIFOLDS

90°

Patt. No.: 1RVK1

Radiator Valves, Push-Fit Inlet

Specification

Instant push-fit connection for increased ease-of-use
No soldering required. No heavy or expensive tools
Suitable for copper, CPVC or PEX pipe
Fields of applications: hot water
Maximum working pressure: 10 bar
Maximum working temperature: 95°C
Taper threads of union tailpiece comply with BS21(ISO7)
Graphite packing gland seal of stem
Handle and lockshield cap attached
CP after polished finish

Straight

CP after polished finish

Patt. No.: 1RVA1

Radiator Valves, C × Union

Specification

Fields of applications: hot water or steam

Maximum working pressure: 10 bar

Maximum working temperature: 95°C

All valves are manufactured to BS2767

Compression connections comply with EN1254-2

Taper threads of union tailpiece and reversible tailpiece comply with BS21(ISO7)

Graphite packing gland seal of stem

Handle and lockshield cap attached

Straight

90°

90°, w/Drain off

Patt. No.: 1RVD1

Radiator Valves, C × C

Specification

Fields of applications: hot water or steam Maximum working pressure: 10 bar Maximum working temperature: 95C All valves are manufactured according to BS2767 Compression connections comply with EN1254-2 Graphite packing gland seal of stem Handle and lockshield cap attached Polished CP or NP finish is available

Straight

90°

90°, w/Drain off

Patt. No.: 1DML

Lockshield valves, Iron Pipe Connection

Specification

Fields of applications: hot water
For iron pipe connection
Maximum working pressure: 10 bar
Maximum working temperature: 95°C
Male thread of tailpiece comply with ISO228(BS2779) Female thread
connections comply with ISO228(BS2779) With self-seal tailpiece
NP finish

1DML1

90° LS

Straight LS

1DML2

Material of Main Parts

Overall & Structure Dimensions

Patt. No.: 1DRB/1DRF

Manual valves, Iron Pipe Connection

Specification
Fields of applications: hot water
For iron pipe connection
Maximum working pressure: 10 bar
Maximum working temperature: 95°C
Male thread of tailpiece comply with ISO228(BS2779) Female thread
connections comply with ISO228(BS2779) With self-seal tailpiece
NP finish

1DRB

Straight LS

1DRF

Material of Main Parts

Overall & Structure Dimensions

H-valves of angular

H-valves of straight Connection fitting for valve heater with pivoting ball isolation valve

Connection fitting for valve heater with pivoting ball isolation valve

H-valves of straight Connection fitting for valve heater with pivoting ball isolation valve

By-pass H-valves of angular Connection fitting for valve heater with pivoting ball isolation valve

By-pass H-valves of straight Connection fitting for valve heater with pivoting ball isolation valve

By-pass H-valves of angular Connection fitting for valve heater with pivoting ball isolation valve

By-pass H-valves of straight Connection fitting for valve heater with pivoting ball isolation valve

Patt. No.: 1RTA1

Towel Rail Radiator Valves, Compression Inlet

Specification

Fields of applications: hot water

Maximum working pressure: 10 bar

Maximum working temperature: 95C

Taper threads of union tailpiece comply with BS21(ISO7)

Compression connections comply with EN1254-2

Non-rising stem

Various handles available

Copper olive for compression end

Double O-ring for stem seal

Polished and chrome plated body and handle

Patt. No.: 1TRA

GB Series Thermostatic Radiator Valves Wax-filled Sensor

Application

The influence of uncontrolled heat gains from cooking, lighting and sunshine etc., can lead to wasteful overheating. The EDISON TRV is designed to react to temperature fluctuations and allow you to control individual room temperature. The sensor head contains a powerful wax-filled sensor which senses temperature changes. These variations cause expansion and contraction of the thermal element which is transmitted to a valve seat which regulates the water flow to the radiator

Certification

INTERTEK & CEN certified, comply with EN215-1

Patt. No.: 1DRJ/1DRK

Thermostatic Radiator Valves Liquid Sensor

Specification

Adjustable temperature range: 7\~28°C Maximum temperature of thermic fluid: 100°C Maximum working pressure: 10 bar Maximum differential pressure: 1bar adjustment range Frost protection cut-in: 7°C

Certification CEN certified, comply with EN215-1 Lic No. DINCERTCO 6T0024

1DRJ

1DRK

Patt. No.: 1TRD

D Series Thermostatic Radiator Valves Liquid Sensor

Application

The control head contains a high precise thermostatic element, which controls the opening and closing of the valve to keep the room temperature at a constant level. The control head is provided with calibration marks, which correspond to the temperature in the following table:

Select the desired room temperature from the table above and turn the control head to align the appropriate number with the set point symbol on the fixed part of the head

Certification

INTERTEK & CEN certified, comply with EN 215-1

Lic No. DINCERTCO 6T0024

Straight

Angle

Straight

Patt. No.: 1RH

S Series Thermostatic Radiator Valves Liquid Sensor

Application

The thermostatic radiator valves with pre-setting bodies are used in two-pipe warmwater pump heating systems with normalto high temperature spread.The internallyintegrated infinite presets enable accuratehydraulic control of hot water supplied andsupplied by each cus-tomer.

The use of convertible radiator valves incombination with thermostatic control headsmakes it possible to keep the ambienttemperature automatically constant, at the setvalue, in the room where they are installedthus guaranteeing an effective energy saving.

Technical Data

THERMOSTATIC RADIATOR VALVES

Patt. No.: 1TRF

Radiator valve for one-pipe systems

Function

In one-pipe systems, radiators are connected in series with respect to the same manifold outlet. When configured for this type of system, sends only the 50% of the flow rate (30% with thermostatic control head) to the radiator, whereas the remaining medium is by-passed and conveyed to the next radiator. In this way the radiators can be shut off individually (for isolation or maintenance) while allowing radiators further downstream in the system to continue operating. Furthermore, the temperature can be regulated automatically using thermostatic control heads or thermoelectric actuators.

Specification

Max. working pressure: 10 bar

Max. differential pressure (with thermostatic control head): 1 bar Max. working temperature: 110°C

Adjustment scale temperature adjustment range frost: 7-28°C protection cut-in: 7°C

Max. ambient temperature: 50°C

Material of Main Parts

Application

The Radiator temperature control valves with integrated pre-regulation are used in two-pipe heating systems with conventional temperature or high temperature differences, and can also be used in single-pipe heating systems.

The valve balances the flow required at the heating end with an integrated pre-regulation function, enabling precise hydraulic control of the hot water required by each customer. Thermostat or electric actuator can be installed to realize automatic control of indoor temperature control.

Patt. No.: 1TMC1 TMV Scheme Type 3

Specification

Factory temperature setting: 38°C Temperature setting range: 35°C\~46°C Temperature (hot supply): 52°C\~65°℃ Temperature (cold supply): 5℃\~25°℃ Minimum hot to mix differential temperature: 10°C Temperature stability: ±2°C Working pressure, static: 16 bar max Working pressure, dynamic: low pressure 0.1-1 bar high pressure 0.5-5 bar Flow rate (1bar pressure loss): 23 l/min

DO8 APPROVED

The TMV3 has been specifically designed and manufactured to meet the rigorous requirement of current TMV3 standards. The valve has been independently tested and certified as meeting the requriements of the DO8 specifications under the TMV3scheme.The valve has been approved for use in the following designations
The valve can be installed in any orientation

Approval

BuildCert Approval Number(TMV3): BC1193/0813
WRAS Approval Number: 1305035

Patt. No.: 1AVA0

Top Vent

Specification

Forged brass body

Maximum working temperature: 110°C

Maximum working pressure: 10 bar (150psi)

The connect thead is conformed to the standard ISO228

Safety Hygroscopic Cap is optional

Patt. No.: 1AVA1 Top Vent

Specification

Forged brass body

Maximum working temperature: 110°C

Maximum working pressure: 10 bar (150psi)

The connect thead is conformed to the standard ISO228

Patt. No.: 1AVE Side Vent

Specification

Forged brass body

Maximum working temperature: 110C Maximum working pressure: 10 bar (150psi) The connect thead is conformed to the standard ISO228

Material of Main Parts

Overall & Structure Dimensions

Patt. No.: 1AVD

Top Vent

Specification

Maximum working temperature: 110°C

Maximum working pressure: 10 bar (145psi)

Maximum percentage of glycol: 30%

Connecting thead conforms to ISO228

Feature

Automatic air vents with external float are designed to remove the air that is released from the water when it is heated and which accumulates at the top of radiators, limiting the normal heat exchange process and giving rise to noise and corrosion.

The air vent has been constructed so that it can be installed on any type of heating emitters ranging from the traditional cast iron radiators to the thin steel panel radiators.

All models are equipped with a hygroscopic safety cap.

Patt. No.: 1AVA2 Top Vent

Specification

Working temperature: -20°C\~200°C Maximum working pressure: 10 bar (145psi) Maximum percentage of glycol: 50% Connecting thead conforms to ISO228 or ISO7 Other connection is available upon request

Feature

Patented design
Automatic venting
Serving closed solar heating system
Plastic free design with chromed DZR brass and stainless steel components
Endure extreme high temperature

Patt. No.: 1APA1 1APB1

Specification

Working temperature: 0°C\~120°℃ Maximum working pressure: 10 bar Maximum percentage of glycol: 50% Connecting thread conforms to ISO228 or ISO7 Solder ends conforms to EN1254-2

Feature

Automatic venting
Serving closed heating and cooling systems
Full port design

Material of Main Parts

Overall & Structure Dimensions

Patt. No.: CZF1-A

Specification

Working temperature: 0 ^ { \circ } { \mathsf { C } } ^ { ~ } 1 1 0 ^ { \circ } { \mathsf { C } }

Maximum working pressure: 10bar

Maximum Percentage of glycol: 50%

Connecting thread conforms to ANSI B1.20.1, ISO228 or ISO7

Feature

Serving closed heating and cooling system Full port design

Material of Main Parts

Patt. No.: CZF1-B

Specification

Working temperature: 0℃\~110°℃

Maximum working pressure: 10bar

Maximum Percentage of glycol: 50%

Connecting thread conforms to ANSI B1.20.1, ISO228 or ISO7

Feature

Serving closed heating and cooling system Full port design

Material of Main Parts

Patt. No.: 2DSC

Specification

Body: glass reinfored nylon canister body

Valve cover: brass

Accessory: with SS mesh guard, holds all impurites and debris of ferrous and ferrous nature inside the water Fuel consumption: reduction of fuel consumption

Max working temperature range: 0°C\~ 90°C

Magnet: 9000G

Connections: 3/4 male

Function

The magnetic dirt separator is installed on the return circuit, at the inlet to the boiler. It is intended exclusively for use in domestic heating systems and is easy to install under the boiler because of its compact size.

The magnet is easily removable for cleaning.

Connections: main body G 3/4", drain G 3/4".

Complete with ball valve and swivel fitting made of brass.

Compatible fluids: water, water + glycol 70/30.

Overall & Structure Dimensions

Patt. No.: 2DSC

Specification

Body: glass reinfored nylon canister body

Accessory: with SS mesh guard, holds all impurites and debris of ferrous and ferrous nature inside the water Fuel consumption: reduction of fuel consumption

Max working temperature range: 0°C\~90°C

Magnet: 9000G

Connections: 3 / 4 " male

Function

The dirt separator series are also equipped with a removable magnetic ring for the separation of ferrous impurities. Made using a composite material specifically designed for use in air-conditioning systems, this dirt separator is especially versatile as it can be installed on both horizontal and vertical pipes.

Patt. No.: 2DSC

Specification

Pressione max./Max pressure: 10 bar

Perdite carico/ Pressure loss: 0, 2 bar

Temp. aqua/ Water temperature: 5°C\~40°C

Temp. ambiente/ Room temperature: 5°C\~50°C

Total maximum hardness: 35°f (350 ppm CaCO₃)

Warning! Treated water can be heated to 75°C-80°C, but above this temperature the polyphosphate becomes gradually less effective.

Function

It is designed for installation directly at the point of use, under the boiler, to treat water with hardness below35°f.
A special brass head and rotary fittings allow these units to be installed either horizontally or vertically.
It is also equipped with a built-in by-pass lever that makes maintenance and refilling particularly easy.
Designed for use with potable water.

Patt. No.: 2DSC

Specification

Body: glass reinfored nylon canister body

Accessory: with SS mesh guard, holds all impurites and debris of ferrous and ferrous nature inside the water Fuel consumption: reduction of fuel consumption

Max working temperature range: 0°C\~ 90°C

Magnet: 9000G

Connections: 3/4 male

Function

The compact magnetic dirt separator ensures that the boiler stays continually protected, as it retains all impurities present in the system and prevents their circulation, consequently avoiding wear and preventing damage to other components of the system (e.g. pumps and heat exchangers).

The magnetic dirt separator is installed on the return circuit, at the inlet to the boiler.

It is intended exclusively for use in domestic heating systems and is easy to install under the boiler because of its compact size. Connections: main body G3/4", drain G 3/4".

Complete with ball valve and swivel fitting made of brass. Compatible fluids: water, water + glycol 70/30.

Patt. No.: TC-CZF1-C

Specification

Working temperature: 0 ^ { \circ } { \mathsf { C } } { \widetilde { \mathsf { \Lambda } } } 9 0 ^ { \circ } { \mathsf { C } }

Maximum working pressure: 3 bar

Dirt separator with magnet

Adjustable for horizontal and vertical pipes

Feature

Serving closed heatingsystem

Visible sediment

Be installed straight or right angle

Material of Main Parts

Overall & Structure Dimensions

Patt. No.: TC-CZF1-C

Installation

Air Vent

Open the air vent manually, purge any air that has collected at the top of the body.

Sludge Drain

1. Observe the amount of impurities inside to determine whether it needs cleaning.

2. Remove the magnets

3. Open the drainvalve, drain the impurities, even while the system is running, using the special key.

Specification

Boiler valve 1 / 2 " with stuffing box and plug with cap

Specification

Boiler valve with compression and plug with cap WRAS approved

Patt. No.: 1PRA1 Safety Valves, F × F, M × F

Specification

Working pressure: 3\~12 bar

Resistant up to 110°C

Female thread connections comply with ISO228

Manual discharge in anti-stock resin

Stainless steel spring

Diaphragm and seal in hot water proof rubber

Forged brass body

The model with pressure meter safety valves are available

CE WRAS ACS WATERREGULATIONSADMSORY SCHEME

Function

C∈ WRAS ACS WATER REGULATIONS ADMSORY SOHEME

IDC safety relief valves are used for pressure control and protection for below systems:

• Boilers in heating system

• Hot water cylinders in the domestic hot water system

• Water system

When the calibrated pressure is reached, the valve opens and discharges the excess pressure which would be dangerous for the boiler and the components in the system itself.

Installation

• Safety relief valves must be installed by qualified technical person.

• Safety relief valve must be installed in line with the flow direction indicated by the arrow on the valve body.

• The safety relief valve can be fitted vertically or horizontally, but not upside down.

Specification

Nominal pressure: PN10

Temperature range: 5\~110°C

Max. opening pressure: Pset +10% • Pset

Min. closing differential: Pset -20% • Pset

Medium: water, air

PED Category: IV

Calibrations: Series 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 10 bar

Material of Main Parts

Overall & Structure Dimensions

SAFETY RELIEF VALVES

Patt. No.: 1ARA1 Safety relief valve, \mathsf { F } x \mathsf { F }

CE WRAS WATERREGULATIONS ADVISORY SCHEME ACS

C∈WRAS ACS

Safety relief valve, Quick insert × F

Patt. No.: 1ARA1 Safety relief valve, \mathsf { F } x \mathsf { F }

CE

Patt. No.: 1ARB1 Safety relief valve, \mathsf { F } x \mathsf { F }

CE WRAS WATERREGULATIONS ADVISORY SCHEME ACS

Patt. No.: 1ARF1 CEWRAS ACS WATER REGULATIONS ADMSORY SCHEME Safety relief valve, { \mathsf { M } } x { \mathsf { F } }

Patt. No.: 1PRA3 CEWRAS ACS WATER REGULATIONS ADMISORY SOHEME Safety relief valve, { \mathsf { M } } x { \mathsf { F } }

Patt. No.: 1PRA5 CEWRAS ACS WATER REGULATIONS ADMSORY SOHEME Safety relief valve, \mathsf { F } x \mathsf { F }

Patt. No.: 1PRA6 C∈ WRAS ACS WATER REGULATIONS ADMISORY SOHEME Safety relief valve, { \mathsf { M } } x { \mathsf { F } }

SAFETY RELIEF VALVES

Patt. No.: 1PRA7 Safety relief valve, M× F

C∈WRAS WATERREGULATIONS ADVISORY SCHEME ACS

Patt. No.: 1PRA10 Safety relief valve, F × F, M × F

CE

Patt. No.: 1PRB1

Assembled instrument holder for heating systems.
Equipped with air vent, safety relief valve, pressure gauge and automatic shut-off cock for expansion vessel.
Max. working temperature: 110°C.
Up to 50 kW.

Patt. No.: 1PRB2

Combined air separator with heating system accessories.
Equipped with air vent, safety relief valve and pressure gauge.
Max. working temperature: 110°C.
Up to 50 kW.

Patt. No.: 1ARI001

Assembled instrument holder for heating systems.
Equipped with air vent, safety relief valve, pressure gauge and automatic shut-off cock for expansion vessel.
Max. working temperature: 110°C.
Up to 50 kW.
Body materials: Q235

Patt. No.: 1ARI002

Combined air separator with heating system accessories.
Equipped with air vent, safety relief valve and pressure gauge.
Max. working temperature: 110°C.
Up to 50 kW.
Body materials: Q235

SAFETY RELIEF VALVES

Patt. No.: 1PRC1

Hydraulic safety group for hot water storage heaters, with shut-off valve and controllable check valve.
Straight end
Max. working pressure: 10bar
Max. working temperature range: 120°C.
Settings: 7 bar

Patt. No.: 1PRC2

Hydraulic safety group for hot water storage heaters, with shut-off valve and controllable check valve.
Bend end
Max. working pressure: 10bar
Max. working temperature range: 120°C.
Settings: 7 bar

Patt. No.: 1PRD1

Plastic discharge tundish for safety groups

Reference standards

ACS

The safety group is in accordance with European Standard EN 1487:2000.

The construction and performance characteristics required of hydraulic safety groups are for hot water storage heaters.

Characteristic components

1. Shut-off cock/ ball valve

2. Class A check valve

3. Inspection port to check functionality of the check valve

4. Safety relief valve

5. Discharge tail pipe

6. Safety valve manual discharge

7. Plug for replacement of the check valve

Specification

Max. working temperature: \mathsf { 1 2 0 ^ { \circ } C }
Max. working pressure: 10 bar
Safety relief valve opening pressure: 7 bar
Medium: water
Max. power output of the water heater: 10KW
Discharge flow rate at 8,4 bar (+20% Po): with water: > 600 l/h with steam: > 220 kg/h

Threaded connections: inlet 3 / 4 ^ { \prime \prime } \mathsf { M } , outlet 3 / 4 ^ { \prime \prime } F

Material of Main Parts

Overall & Structure Dimensions

Patt. No.: 1STA
Thread Static Balancing Valve
Brass Body

Introduction

This series thread static balancing valve boasts the variable orifice instead of the fixed orifice to achieve valve preset and highly enhance system debugging efficiency through valve open turns and KV comparison table. The system balance will be achieved rapidly by working with professional static balancing valve adjustment equipment and adjusting accurately

Specification

Medium water or 50% glycol mixing solution

Temperature range -10 ℃\~120℃

Maximum working pressure 16 bar

Accuracy ±10%

Number of adjustment turns 8

Connections

\- main 1/2″\~2″ F (ISO 228-1)

\- valve body pressure test ports 1/4" F (ISO 228-1)

Patt. No.: 1BV1A
Thread Static Balancing Valve
Brass Body

Introduction

This series thread static balancing valve boasts the variable orifice instead of the fixed orifice to achieve valve preset and highly enhance system debugging efficiency through valve open turns and KV comparison table. The system balance will be achieved rapidly by working with professional static balancing valve adjustment equipment and adjusting accurately

Material of Main Parts

Specification

Medium

water or 50% glycol mixing solution

Temperature range

-10℃\~120℃

Maximum working pressure

16 bar

Accuracy

±10%

Number of adjustment turns 8

Connections

\- main

1 / 2 ^ { \prime \prime } { ~ } 2 ^ { \prime \prime } F (ISO 228-1)

\- valve body pressure test ports

1/4" F (ISO 228-1)

KV Schedule

CARGA TOTAL

PRESSURE INDEPENDENT CONTROL VALVE(PICV)

Patt. No.: 1FBB

Thread Dynamic Balancing Electric Constant Valve Brass Body

Feature

The pressure independent control valve is a device composed of an automatic flow rate regulator and a control valve with actuator. The device can adjust flow rate and keep it constant in the presence of changing differential pressure conditions of the circuit in which it is installed.

The pressure independent control valve (PiCV) is supplied complete with connections for upstream and downstream pressure test ports for checking of operating conditions.

The device can be used in air-conditioning systems.

Material of Main Parts

PRESSURE INDEPENDENT CONTROL VALVE(PICV)

Specification

water or 50% glycol mixing solution

Temperature range

-20 ℃\~110℃

Maximum working pressure

16 bar

Dp range

15\~150Kpa; 22\~220Kpa

Flow rates

0.06\~0.8 m³/h

Accuracy

±5%

Connections

\- main

\- pressure test ports

1/2", 3/4″F (ISO 228-1)

1/4″ F (ISO 228-1)

DYNAMIC BALANCING THERMOSTATIC VALVES

Patt. No.: 1FBC

Thread Dynamic Balancing Thermostatic Valve Brass Body

Feature

The pressure independent control valve is a device composed of an automatic flow rate regulator and a control valve with actuator. The device can adjust flow rate and keep it constant in the presence of changing differential pressure conditions of the circuit in which it is installed.

Material of Main Parts