LEVELe-105 Elevator Interior: Minimal panels in Bonded Bronze, Dark Patina, Rain pattern; custom wood veneer; and Fused Nickel Silver, LEVELe-105

Sandstone finish. Round handrail. The Wyatt, Portland, Oregon.

The back wall of the LEVELe-105 is comprised of

six panels; side walls are comprised of four. Two

frame extrusion designs – Minimal and Capture

– allow for a variety of materials and thicknesses,

including glass.

F+S recommendation: for the wall panels (A, B,

C, & D), combine a maximum of two materials

in a variety of layouts. Handrail panel and base

materials, and extrusion and corner reveal colors,

can also be specified.

left to right: Capture panels in ViviGraphix Spectra glass, custom graphic interlayer, Sta

Capture panels in ViviStone Honey Onyx glass, Standard finish; Fused Graphite, Sandston

ABCD

andard finish; ViviChrome Chromis glass, custom color interlayer, Standard finish; and Stainless Steel, Satin finish |

ne finish, Dallas pattern; and Fused Graphite, Seastone finish | Capture panels in ViviChrome Chromis glass, White

interlayer, Opalex finish; and Fused Graphite, Sandstone finish

51 | FORMS+SURFACES

LEVELe-106

Each wall of the LEVELe-106 consists of six panels

of varied sizes. Two frame extrusion designs

– Minimal and Capture – allow for a variety of

materials and thicknesses, including glass.

F+S recommendation: use a maximum of three

materials for the walls – one for each panel type

(A, B & C). Base material, as well as extrusion and

corner reveal colors, can also be specified.

left to right: Capture panels in Bonded Quartz, White, Carbon pattern; and Stainless Steel, Seastone finish | Captur

Fused Bronze, Satin finish | LightPlane Panels in ViviGraphix Elements glass, Chevron interlayer, Pearlex finish; Cap

FORMS+SURFACES | 52

ABC

re panels in custom wood veneer; ViviChrome Chromis glass, custom color interlayer, Standard finish; and

pture panels in ViviChrome Chromis glass, Taupe interlayer, Pearlex finish; and Stainless Steel, Seastone finish.

LEVELe-106 Elevator Interior: LightPlane Panels in ViviStone Pearl Onyx glass, Pearlex finish; Capture panels in ViviChrome Chromis glass,

Slate Blue interlayer, Pearlex finish; and Stainless Steel, Seastone finish. Quadrant handrails. 1100 Louisiana Street, Houston, Texas.

53 | FORMS+SURFACES

FORMS+SURFACES | 54

LEVELe-107 Elevator Interior: Capture panels in Wenge wood veneer; and Stainless Steel, Linen finish; LightPlane Panels in ViviGraphix Elements glass, LEVELe-107

Yucca interlayer, Pearlex finish. Compass handrails. Representative location.

The back wall of the LEVELe-107 features a

series of horizontal panels and a central vertical

accent panel. Side walls have horizontal panels

bordered by a vertical accent panel at the front of

the cab. Two frame extrusion designs – Minimal

and Capture – allow for a variety of materials and

thicknesses, including glass.

F+S recommendation: use a maximum of three

materials for the walls – one for each panel type

(A, B & C). Base material, and extrusion and

corner reveal colors, can also be specified.

left to right: Capture panels in ViviChrome Chromis glass, White interlayer, Opalex finish; and Stainles

ViviChrome Chromis glass, White interlayer, Opalex finish; LightPlane Panel in ViviStone Abalone Onyx g

ABC

ss Steel, Linen finish; LightPlane Panel in ViviStone Abalone Onyx glass, Pearlex finish | Detail of Capture panels in

glass, Pearlex finish | Capture panels in Wenge wood veneer; and Stainless Steel, Linen finish; LightPlane Panel in

ViviGraphix Elements glass, Yucca interlayer, Pearlex finish

55 | FORMS+SURFACES

LEVELe-108

Each wall of the LEVELe-108 is comprised of upper

and lower panels in a stepped gradation of sizes.

Two frame extrusion designs – Minimal and Capture

– allow for a variety of materials and thicknesses,

including glass.

F+S recommendation: use a maximum of two

materials for the walls – one for each panel type

(A & B). Base materials, as well as extrusion and

corner reveal colors, can also be specified.

left to right: Capture panels in Stainless Steel, Mirror finish, City Lights Eco-Etch pattern; and Stainless Steel, Seasto

Steel, Seastone finish | Capture panels in ViviGraphix Spectra glass, Skylight interlayer, Standard finish; and Stainle

FORMS+SURFACES | 56

AB

one finish | Detail of Capture panels in Stainless Steel, Mirror finish, City Lights Eco-Etch pattern; and Stainless

ess Steel, Seastone finish

LEVELe-108 Elevator Interior: Capture panels in Stainless Steel, Mirror finish, City Lights Eco-Etch pattern; and Stainless Steel, Seastone finish.

Rectangular handrails. Representative location.

57 | FORMS+SURFACES

FORMS+SURFACES | 58

CabForms 1000-A Elevator Interior: panels in Stainless Steel, Seastone finish. Round handrails used at handrail and bumper heights. CABFORMS ELEVATOR INTERIORS

The Mother Baby Center at Abbott Northwestern and Children's Hospital, Minneapolis, Minnesota.

CabForms Elevator Interiors expand the range design

and performance options with configurable layouts

that can be tailored to project-specific material

themes and architectural styles.

CabForms 2000 features a stile, rail and inset

design that accommodates a wide variety of material

and finish combinations. Options draw from our

extensive Surfaces line-up and include VividGlass.

CabForms 1000 is a rugged stainless steel

full-panel system optimized for airports, parking

structures and other public spaces where durability

and potential abuse are concerns. Select models

incorporate contrasting accent areas for additional

visual interest.

All standard CabForms packages include wall

panels, trim pieces and installation hardware.

Ceilings and handrails are optional.

CabForms Elevator Interiors can be configured using

our Elevator Design Studio. Learn more about this

interactive design tool on page 150.

CabForms 2000-N Elevator Interior: in

in Stainless Steel, Seastone finish. Ro

nsets in Mirror glass; ViviStone Honey Onyx glass, Pearlex finish; and Stainless Steel, Linen finish. Stiles and rails

ound Handrails. Woolworth Building, Eugene, Oregon.

59 | FORMS+SURFACES

CABFORMS 2000-N

Each wall of the CabForms 2000-N is

comprised of panels featuring a stile, rail

and inset design. Panel elements in a variety

of materials and finishes, including glass,

may be selected to coordinate or contrast

with one another.

F+S recommendation: use a maximum of

two materials for the wall panel insets – one

for the upper insets (A) and one for the

lower insets (B). Stiles and rails (C) can be

specified in complementary stainless steel

and Fused Metal finishes.

left to right: insets in ViviGraphix Graphica glass, Silkworm interlayer in White, Standard

wood veneer; and Stainless Steel, Seastone finish, Cinch Fusion pattern; stiles and rails in St

FORMS+SURFACES | 60

ABC CabForms 2000-N Elevator Interiors: insets in ViviGraphix Graphica glass, Seagrass interlayer in White, Standard finish; and Stainless Steel,

Marquisette finish; stiles and rails in Stainless Steel, Sandstone finish. Quadrant handrails. Walgreens Corporate Headquarters, Deerfield, Illinois.

finish; and Stainless Steel, Sandstone finish; stiles and rails in Stainless Steel, Seastone finish | insets in Bamboo

tainless Steel, Seastone finish | insets in American Cherry wood veneer; and Fused Bronze, Seastone finish, Dallas

Impression pattern; stiles and rails in Fused Bronze, Seastone finish

61 | FORMS+SURFACES

FORMS+SURFACES | 62

CABFORMS 1000 - A, B, C

CabForms 1000-A Elevator Interior: panels in Stainless Steel, Marquisette finish, Dallas Impression pattern. Round handrails. CabForms 1000 wall panels consist of a 1000-A B

Roosevelt University - Student Living, Academic and Recreation Center, Chicago, Illinois. decorative metal face bonded to a fire-rated A

structural substrate. For CabForms 1000-A,

the main panel face (A) is a single piece of

stainless steel. For CabForms 1000-B and

1000-C, main panel faces (A) of stainless

steel are enhanced by accent areas (B) of

stainless steel or Fused Metal.

F+S recommendation: use two materials for

CabForms 1000-B and 1000-C interiors –

stainless steel for the main panels (A) and

Fused Metal for the accent panels (B).

left to right: 1000-A in Stainless Steel, Seastone finish | 1000-B in Stainless Steel, Diamond finish, with accent ar

areas in Stainless Steel, Seastone finish, Stripe Eco-Etch pattern

1000-B 1000-C

reas in Fused Nickel Silver, Sandstone finish | 1000-C in Stainless Steel, Seastone finish, with accent

63 | FORMS+SURFACES

ELEVATOR CEILINGS left to right\/top to bo

Stainless Steel, Seaston

Based on a framework of interlocking extrusions, our

Elevator Ceilings are lightweight, easy to install and LED downlights an

include many of the same stainless steel and Fused

Metal options as our Elevator Interiors. The standard

ceiling is a six-panel suspended island design with six

low-voltage high-efficiency LED downlights and\/or

LED perimeter lighting.

Ceilings use a side-mount installation system that

provides a generous range of adjustment to align

the ceiling with the wall panels. Standard packages

include ceiling with light fixture and emergency

lighting power source.

Elevator Ceilings can be specified with our LEVELe

or CabForms Elevator Interiors or incorporated into

an existing or custom elevator interior.

FORMS+SURFACES | 64

ottom: ceiling in Fused White Gold, Mirror finish, with LED downlights and LED perimeter accent lighting | ceiling in

ne finish, with LED downlights and LED perimeter accent lighting | ceiling in Fused Nickel Silver, Mirror finish, with

nd LED perimeter accent lighting | ceiling in Stainless Steel, Satin finish, with LED downlights | ceiling in Stainless

Steel, Seastone finish with high-output LED perimeter lighting

Elevator ceiling in Stainless Steel, Sandstone finish, with LED downlights. 1000 Broadway, Portland, Oregon.

65 | FORMS+SURFACES

FORMS+SURFACES | 66

elevator HANDRAILS left to right\/top to bottom: Round han

aluminum standoff | Compass hand

Elevator Handrails are optional and can be Polished Stainless Steel | Sextant ha

specified for elevator back walls and\/or side

Rectangular handrail in Satin Stainless Steel. 1600 Market Street, Philadelphia, Pennsylvania. walls. While designed specifically for LEVELe and

CabForms Elevator Interiors, they can be used in

other elevator interiors as well.

Six different series provide a range of stylistic

possibilities. Material options include stainless steel

and bronze, each in a variety of finishes selected

to complement other materials featured in the

elevator interior.

For continuity throughout a space, our Elevator

Handrails have been designed to coordinate with

our Door Pull designs.

ndrail in Satin Stainless Steel with radius bend ends | Modular handrail in Satin Stainless Steel with clear anodized

drail with Ring standoff in Satin Stainless Steel | Quadrant handrail in Satin Stainless Steel with Vise standoff in

andrail in Santoprene and Satin Stainless Steel

67 | FORMS+SURFACES

ELEVATOR INTERIOR applications

LEVELe-103 Elevator Interior: Minimal panels in Fused White Gold, Sandstone finish; and custom laminate. Ceiling i

Edward Hines, Jr. VA Hospital, Hines, Illinois. | LEVELe-102 Elevator Interior: Capture panels in ViviGraphix Graphica

Opalex finish; and American Cherry with Dark Mahogany Stain wood veneer. Round handrail. Sallie Mae, Newark, D

FORMS+SURFACES | 68

in Fused White Gold, Mirror finish, with LED downlights and LED perimeter accent lighting.

a glass, Cairo interlayer in White, Standard finish; ViviChrome Chromis glass, White interlayer,

Delaware.

LEVELe-103 Elevator Interior: Capture panels in Bonded Quartz, White, Kalahari pattern; and Stainless Steel, Seasto

The Mother Baby Center at Abbott Northwestern and Children's Hospital, Minneapolis, Minnesota. | LEVELe-105 El

Natural Patina, Grass pattern; and Stainless Steel, Sandstone finish. Round handrail. Roanoke Building, Minneapolis

one finish. Ceiling in Stainless Steel, Seastone finish, with high-output LED perimeter lighting. Round handrail.

levator Interiors: Capture panels in ViviChrome Chromis glass, Taupe interlayer, Opalex finish; Bonded Bronze,

s, Minnesota.

69 | FORMS+SURFACES

ELEVATOR INTERIOR applications

LEVELe Wall Cladding System: Blind panels in ViviChrome Chromis glass, custom color interlayer, Opalex finish. LEVE

Opalex finish; Fused Graphite, Sandstone finish; and Stainless Steel, Satin finish. Rectangular handrail. Mission City C

Graphica glass, Seagrass interlayer in White, Pearlex finish; Stainless Steel, Seastone finish, Seagrass Eco-Etch patte

FORMS+SURFACES | 70

ELe-105 Elevator Interior: Capture panels in ViviChrome Chromis glass, custom color interlayer,

Corporate Center, San Diego, California. | LEVELe-105 Elevator Interior: Capture panels in ViviGraphix

ern; and Stainless Steel, Seastone finish. Round handrail. LAX Terminal 4, Los Angeles, California.

LEVELe-105 Elevator Interior: Capture panels in ViviGraphix Spectra glass, custom graphic interlayer, Standard finis

Satin finish. Round handrail. Cottage Hospital, Santa Barbara, California. | LEVELe-105 Elevator Interior: Capture pa

Seastone finish. Rectangular handrail. Hilton Miami Airport Hotel, Miami, Florida.

sh; ViviChrome Chromis glass, custom color interlayer, Standard finish; and Stainless Steel,

anels in custom laminate; Bonded Bronze, Dark Patina, Charleston pattern; and Fused Bronze,

71 | FORMS+SURFACES

FORMS+SURFACES | 72

Stainless Steel Elevator Doors in Stainless Steel, Mirror finish, ECO205H Eco-Etch pattern. Lila Cockrell Theatre, San Antonio, Texas. elevator

doors

Elevator doors are the perfect way to carry a

design theme across a property, from elevator

interior to elevator lobby and beyond. Included

within this group are door skins for elevator

car doors and hoistway doors in a variety of

materials, finishes and patterns.

73 | FORMS+SURFACES

STAINLESS STEEL & FUSED METAL

Elevator Door Skins in stainless steel and five L-Shaped Return

Fused Metal colors – Fused Bronze, Fused

Graphite, Fused Nickel Bronze, Fused Nickel

Silver and Fused White Gold – create a striking

design statement. Finishes include High-Durability

and standard options. Patterns draw from our

Impression and Eco-Etch palettes and add visual

interest while helping conceal the occasional

surface blemish.

Door skins typically serve as both door face and

edge detail and can be specified with an “L”

shaped return or a “J” shape that returns around

the back side of the door.

left to right: Stainless Steel, Mirror finish, custom Eco-Etch pattern | Sta

FORMS+SURFACES | 74

J-Shaped Return

ainless Steel, Sandstone finish, Dallas Impression pattern | Fused Bronze, Mirror finish, ECO205H Eco-Etch pattern

Stainless Steel Elevator Doors in Stainless Steel, Mirror finish, custom Eco-Etch pattern. Renaissance Schaumburg Hotel & Convention Center, Schaumburg, Illinois.

75 | FORMS+SURFACES