丝锥

综合目录

注：

* 本样册中的产品图片及内容仅作示意，实物产品效果（包括但不限于外观、颜色、尺寸）可能略有差异，请以实物为准。

* 本样册中的数据为理论值，均来源于不二越内部实验，于特定测试环境下所得（请见各项具体说明），实际使用中可能因产品个体差异、使用条件

和环境因素不同略有不同，请以实际使用的情况为准。

* 本样册中的“某通用***（各刀具类产品）”、“某***（各刀具类产品）”、“某产品”、“其他***（各刀具类产品）”、“其他产品”等相同或

类似描述均指的是一般意义上的通用性刀具类产品，不特指任何厂商所生产的刀具类产品。

* 本样册中的“旧款产品”、“旧产品”、“以往品”、“以往材料”等相同或类似描述指的是本公司以往生产、销售的旧型号产品，或用于制造本公

司旧型号产品的材料。

* 本样册中中所涉及的“超硬”、“超微粒硬质合金”等均属于一般意义上的行业名词或者材料名词的表达方式，不涉及对本样册中产品的性能描述。

* The pictures and contents of the products in this sample book are only for illustration. The effects of the physical products (including but

not limited to appearance, color and size) may vary slightly. Please refer to the physical products.

* The data in this sample book are theoretical values, which are derived from the internal experiments in NACHI. The data obtained under

the specific test environment (see the specific instructions). The actual use may vary slightly according to the individual differences of the

products, the use conditions and environmental factors. Please take the actual use as the criterion.

* The same or similar descriptions as “a general *** (various tool products)”, “a ***(various tool products)”, “a product”, “other ***

(various tool products)”, “other products” refer to general-purpose tool products in general, and do not specifically refer to tool products

produced by any manufacturer in this catalogue.

* The same or similar descriptions as “old model product”, “old product”, “previous product” and “previous material” in this catalog refer to

the old model products produced and sold by our company in the past, or the materials used to manufacture our old model products.

* The “superhard”, “ultra-fine cemented carbide”, etc. involved in this catalogue are all expressions of industry terms or material terms in

the general sense, and do not involve the performance description of the products in this catalogue.

■ 新的ZT涂层，兼具更好的耐磨损性、耐热性和低摩擦性

■ 新的油槽ZT刃形(PAT.P)、卧式M/C加工也能发挥高润滑性

■ 新的挤压丝锥专用材料同时兼顾韧性和硬度

■ 适合多种常见的被削材、有效提升长寿命和低扭矩

Overwhelmingly long tool life and low torque forming tap

■ Excellent wear resistance, heat resistance and low friction are achieved by the newly developed ZT coating

■ Newly developed oil groove ZT flute (PAT.P) demonstrates high lubrication performance even in horizontal machining center

■ Newly developed material for forming tap that has both toughness and hardness

■ Compatible with a wide range of work materials, achieving overwhelming long tool life and low torque

有效提升长寿命和低扭矩的挤压丝锥

■ 挤压部分牙形采用无同心圆设计

■ 由于接触面积变小、摩擦阻力也减小，实现加工

扭矩降低和抑制磨损

■ ZT涂层通过提高韧性的AlTi系膜和平滑化处理的组合，优化发挥膜性能

■ 平滑化处理使表面粗糙度变小、抑制施加到涂层上的负载和摩擦阻力。

■ ZT coating maximizes film performance by combining AlTi-based film that improved toughness, and Super smooth surface treatment

■ Super smooth surface treatment reduces surface roughness and suppresses coating load and frictional resistance

■ Marginless is adopted for forming parts of the thread

■ Wear resistance is suppressed by reducing the contact area,

　 reducing machining torque and suppressing wear progress

■ The newly developed oil groove shape ZT Flutes (PAT.P) widens the oil groove

　 deeply and greatly to improve the flow rate of cutting fluid

■ Demonstrates high lubrication performance

　 even in horizontal machining center where cutting fluid is difficult to reach

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

无同心圆

Marginless

有同心圆

Having margin

形状

Shape

涂层

Coating

ZT Forming Tap NEW ZTF Product Info

Zenith

Toughness

同心圆部

Margin part

以往品

Conventional

ZT刃形（PAT.P）

ZT Flutes

硬度 Hardness

韧性Toughness

■ 挤压丝锥专用组织颗粒细化的新含钴高速钢材料开发

■ 高度钢母材兼顾韧性和高硬度化

■ Developed a new cobalt HSS with a finer structure exclusively for forming tap

■ Achieves high hardness while maintaining the toughness

　 of the high speed steel base material

材料

Material

低扭矩

Low torque

组织颗粒粗

高硬度材

High hardness

material

The texture of

the material

is coarse

组织颗粒细化

ZT Forming Tap

The texture of

the material is fine

以往材料

Conventional

material

有平滑化处理

ZT挤压丝锥

Having Super smooth surface treatment

ZT Forming Tap

无平滑化处理

Not having

Super smooth surface treatment

表面凹凸小

Surface roughness is

extremely small

表面凹凸大

Surface roughness is large

平滑化处理的有无

Having or not having

Super smooth surface treatment

ZT涂层

（AlTi系） TiCN系涂层

TiCN coating ZT coating (AlTi)

磨损小

Wear is small

磨损大

Wear is big

定数加工后的磨损比较

Wear comparison after constant machining

高硬度含钴高速钢

AlCrTi系膜

AlCrTi based film

AlTi系膜

AlTi based film

High hardness cobalt HSS

Wear resistance

Reinforced membrane

耐磨损性强化膜

Adhesion and toughness

Reinforced membrane

密着性・韧性 强化膜

平滑化处理

Super smooth surface treatment

■ 通过无同心圆•油槽形状和平滑化处理、抑制摩擦阻力

■ 即使是主轴扭矩问题或钢系材料，也能降低20%的加工扭矩

■ Friction resistance is suppressed by marginless,

　 oil groove shape and Super smooth surface treatment

■ 20% reduction in machining torque even for steel-based materials

　 where spindle torque is a problem

螺纹尺寸：M12x1.75

被削材：SCM440H（35HRC）

切削速度：10m/min

螺纹有效长：1.5D（18mm）

底孔径：φ11.2

切削油：水溶性切削油剂

使用机械：立式M/C（BT50）

Size

Workpiece

Processing Speed

Effective thread length

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine: Vertical machining center

-1,000

0

3,000

2,000

4,000

1,000

-2,000

扭矩Torque (Ncm)

加工扭矩比较 Comparison of processing torque

丝锥正转

Tap normal rotation

丝锥反转

Tap reverse rotation

降低约20%

Approximately

20% reduction

时间 (s)

Time

ーＺＴ挤压丝锥

ー以往品

1 2 3 4 5

油槽

Oil groove

外径

Major diameter

内螺纹内径

Minor diameter

油槽加深加大

Deep and wide oil groove

以往品

Conventional

卧式M/C冷却液流量的比较 Comparison of coolant flow rate in horizontal machining center

约1.3倍的流量

Approximately 1.3 times the flow rate

75mℓ 100mℓ

冷却液

Coolant 工件 Workpiece 螺纹尺寸：M12×1.75

切削速度：5m/min

切削油: 水溶性切削油剂

供油方式: 直通供油

一孔加工

Size

Processing Speed

Cutting Fluid: Water-soluble

Refueling method: Collet through

1 hole processing

ZT Forming Tap

Conventional

■ 新的油槽形状ZT刃形（PAT.P），油槽加深加大，

提升了切削油剂的流量

■ 切削油剂难冷却的卧式M/C，也能发挥高润滑性

ZT

挤压丝锥

ZT挤压丝锥

ZT Forming Tap

挤压丝锥

1

■ 新的ZT涂层，兼具更好的耐磨损性、耐热性和低摩擦性

■ 新的油槽ZT刃形(PAT.P)、卧式M/C加工也能发挥高润滑性

■ 新的挤压丝锥专用材料同时兼顾韧性和硬度

■ 适合多种常见的被削材、有效提升长寿命和低扭矩

Overwhelmingly long tool life and low torque forming tap

■ Excellent wear resistance, heat resistance and low friction are achieved by the newly developed ZT coating

■ Newly developed oil groove ZT flute (PAT.P) demonstrates high lubrication performance even in horizontal machining center

■ Newly developed material for forming tap that has both toughness and hardness

■ Compatible with a wide range of work materials, achieving overwhelming long tool life and low torque

有效提升长寿命和低扭矩的挤压丝锥

■ 挤压部分牙形采用无同心圆设计

■ 由于接触面积变小、摩擦阻力也减小，实现加工

扭矩降低和抑制磨损

■ ZT涂层通过提高韧性的AlTi系膜和平滑化处理的组合，优化发挥膜性能

■ 平滑化处理使表面粗糙度变小、抑制施加到涂层上的负载和摩擦阻力。

■ ZT coating maximizes film performance by combining AlTi-based film that improved toughness, and Super smooth surface treatment

■ Super smooth surface treatment reduces surface roughness and suppresses coating load and frictional resistance

■ Marginless is adopted for forming parts of the thread

■ Wear resistance is suppressed by reducing the contact area,

　 reducing machining torque and suppressing wear progress

■ The newly developed oil groove shape ZT Flutes (PAT.P) widens the oil groove

　 deeply and greatly to improve the flow rate of cutting fluid

■ Demonstrates high lubrication performance

　 even in horizontal machining center where cutting fluid is difficult to reach

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

无同心圆

Marginless

有同心圆

Having margin

形状

Shape

涂层

Coating

ZT Forming Tap

NEW ZTF Product Info

Zenith

Toughness

同心圆部

Margin part

以往品

Conventional

ZT刃形（PAT.P）

ZT Flutes

硬度 Hardness

韧性Toughness

■ 挤压丝锥专用组织颗粒细化的新含钴高速钢材料开发

■ 高度钢母材兼顾韧性和高硬度化

■ Developed a new cobalt HSS with a finer structure exclusively for forming tap

■ Achieves high hardness while maintaining the toughness

　 of the high speed steel base material

材料

Material

低扭矩

Low torque

组织颗粒粗

高硬度材

High hardness

material

The texture of

the material

is coarse

组织颗粒细化

ZT Forming Tap

The texture of

the material is fine

以往材料

Conventional

material

有平滑化处理

ZT挤压丝锥

Having Super smooth surface treatment

ZT Forming Tap

无平滑化处理

Not having

Super smooth surface treatment

表面凹凸小

Surface roughness is

extremely small

表面凹凸大

Surface roughness is large

平滑化处理的有无

Having or not having

Super smooth surface treatment

ZT涂层

（AlTi系） TiCN系涂层

TiCN coating ZT coating (AlTi)

磨损小

Wear is small

磨损大

Wear is big

定数加工后的磨损比较

Wear comparison after constant machining

高硬度含钴高速钢

AlCrTi系膜

AlCrTi based film

AlTi系膜

AlTi based film

High hardness cobalt HSS

Wear resistance

Reinforced membrane

耐磨损性强化膜

Adhesion and toughness

Reinforced membrane

密着性・韧性 强化膜

平滑化处理

Super smooth surface treatment

■ 通过无同心圆•油槽形状和平滑化处理、抑制摩擦阻力

■ 即使是主轴扭矩问题或钢系材料，也能降低20%的加工扭矩

■ Friction resistance is suppressed by marginless,

　 oil groove shape and Super smooth surface treatment

■ 20% reduction in machining torque even for steel-based materials

　 where spindle torque is a problem

螺纹尺寸：M12x1.75

被削材：SCM440H（35HRC）

切削速度：10m/min

螺纹有效长：1.5D（18mm）

底孔径：φ11.2

切削油：水溶性切削油剂

使用机械：立式M/C（BT50）

Size

Workpiece

Processing Speed

Effective thread length

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine: Vertical machining center

-1,000

0

3,000

2,000

4,000

1,000

-2,000

扭矩Torque (Ncm)

加工扭矩比较 Comparison of processing torque

丝锥正转

Tap normal rotation

丝锥反转

Tap reverse rotation

降低约20%

Approximately

20% reduction

时间 (s)

Time

ーＺＴ挤压丝锥

ー以往品

1 2 3 4 5

油槽

Oil groove

外径

Major diameter

内螺纹内径

Minor diameter

油槽加深加大

Deep and wide oil groove

以往品

Conventional

卧式M/C冷却液流量的比较 Comparison of coolant flow rate in horizontal machining center

约1.3倍的流量

Approximately 1.3 times the flow rate

75mℓ 100mℓ

冷却液

Coolant 工件 Workpiece 螺纹尺寸：M12×1.75

切削速度：5m/min

切削油: 水溶性切削油剂

供油方式: 直通供油

一孔加工

Size

Processing Speed

Cutting Fluid: Water-soluble

Refueling method: Collet through

1 hole processing

ZT Forming Tap

Conventional

■ 新的油槽形状ZT刃形（PAT.P），油槽加深加大，

提升了切削油剂的流量

■ 切削油剂难冷却的卧式M/C，也能发挥高润滑性

ZT

挤压丝锥

ZT挤压丝锥

ZT Forming Tap

挤压丝锥 ZTF

ZT Forming Tap

规格1 2

3

单位（Unit）： mm

Code No.

3M0.5R

3M0.5R

4M0.7R

4M0.7R

5M0.8R

5M0.8R

6M1R

6M1R

8M1.25R

8M1.25R

8M1R

8M1R

10M1.5R

10M1.5R

10M1.25R

10M1.25R

10M1R

10M1R

12M1.75R

12M1.75R

12M1.5R

12M1.5R

12M1.25R

12M1.25R

12M1R

12M1R

14M2R

14M2R

14M1.5R

14M1.5R

16M2R

16M2R

16M1.5R

16M1.5R

编码

Thread Size

M3X0.5

M3X0.5

M4X0.7

M4X0.7

M5X0.8

M5X0.8

M6X1

M6X1

M8X1.25

M8X1.25

M8X1

M8X1

M10X1.5

M10X1.5

M10X1.25

M10X1.25

M10X1

M10X1

M12X1.75

M12X1.75

M12X1.5

M12X1.5

M12X1.25

M12X1.25

M12X1

M12X1

M14X2

M14X2

M14X1.5

M14X1.5

M16X2

M16X2

M16X1.5

M16X1.5

螺纹尺寸

Lc

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

切削锥部

LF

46

46

52

52

60

60

62

62

70

70

70

70

75

75

75

75

75

75

82

82

82

82

82

82

82

82

88

88

88

88

95

95

95

95

全长

THLGTH

5.6

5.6

8.1

8.1

9.4

9.4

9.0

9.0

11.6

11.6

9.3

9.3

14.2

14.2

11.8

11.8

9.3

9.3

16.8

16.8

15.7

15.7

12.9

12.9

10.1

10.1

19.4

19.4

15.7

15.7

19.4

19.4

15.7

15.7

螺纹长度

Lobes

5

5

5

5

5

5

5

5

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

沟槽数

DCON

4.0

4.0

5.0

5.0

5.5

5.5

6.0

6.0

6.2

6.2

6.2

6.2

7.0

7.0

7.0

7.0

7.0

7.0

8.5

8.5

8.5

8.5

8.5

8.5

8.5

8.5

10.5

10.5

10.5

10.5

12.5

12.5

12.5

12.5

柄径

DN

2.35

2.35

3.15

3.15

4.05

4.05

4.75

4.75

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

钻身直径

LU

18

18

20

20

22

22

24

24

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

钻颈长

Type

1

2

1

2

1

2

1

2

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

规格

Stock

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

库存

TAP Limit

等级

R5

R5

R6

R6

R6

R6

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R8

R8

R7

R7

R7

R7

R7

R7

R10

R10

R9

R9

R10

R10

R9

R9

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

●： 标准库存品 Stocked items

SS400

◎

10～50

◎

10～50

◎

10～40

◎

10～30

○

5～20

○

3～15

－

－

－

－

◎

10～50

一般

结构用钢

S15C

低碳素钢

S50C

高碳素钢

SCM、SCr

合金钢 调质钢

30～40HRC

推荐切削油剂

Cutting Fluids

水溶性油剂

Warter soluble Oil

水溶性油剂

Warter soluble Oil

高润滑水溶性

油剂或油性

Highly lubricated

water-soluble oil

or Oily

被削材选定基准表和切削速度

Selection Chart according to Work Materials and Standard Processing Condition

FCD

球墨铸铁

FC

铸铁

AC、ADC

铝合金

SUS

不锈钢

Structural

Steel

Low Carbon

Steel

◎

10～50

S40C

中碳素钢

Medium

Carbon Steel

High Carbon

Steel Alloy Steel

Heat treated

Steel

Ductile

Cast Iron Cast Iron

Aluminum

Alloy

Stainless

Steel

根据加工方式寿命比较 Comparison of tool life by processing direction

螺纹尺寸：M12x1.75

被削材：S50Ｃ

Size

Workpiece

切削速度：30m/min

螺纹有效长：1.5D（18mm）

Processing Speed

Effective thread length

底孔径：Φ11.2

切削油 ：水溶性切削油剂

Diameter of prepared hole

Cutting Fluid: Water-soluble

螺纹尺寸：M6x1

螺纹有效长：12mm（2D）

底孔径：φ5.55

切削油 ：水溶性切削油剂

使用机械 ：立式M/C

Size

Effective thread length

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine:Vertical machining center

1,540

2,685

ZT挤压丝锥

ZT Forming Tap

ZT挤压丝锥

ZT Forming Tap

3,000

6,000

12,000

9,000

0

加工孔数

No. of cutting holes

卧式M/C

Horizontal machining center

ZT挤压丝锥 ZT Forming Tap

无论加工方式，均有效提升长寿命

Overwhelmingly long tool life regardless

of the processing direction

立式M/C

Vertical machining center

8,911 9,290

长寿命

Long tool life

■ 与以往品相比，寿命是3倍以上

■ 切削油剂很难冷却的卧式M/C加工，

实现5倍以上的长寿命

■ Tool life is more than 3 times Conventional

■ Achieves a long tool life of 5 times or more

　 with horizontal machining center,

　 which is difficult for cutting fluid to reach

　 and whose tool life is likely to short

3.4倍

Times 5.7倍

Times

实现多种常见被削材长寿命

Achieves overwhelming long tool life with a wide range of work materials

多用途

Multipurpose

4,000

8,000

16,000

12,000

0

以往品

Conventional

加工孔数

No. of cutting holes

ADC12

Aluminum Alloy

切削速度 Processing Speed 70m/min

Lc

LF

THLGTH LU DN

DCON

DRVS

Lk

工具材料

HSS

Co涂层

ZT

LIST8800 订货方式 Order ZTF 编码 Code 切削锥部 Lc

选定表

Selection chart

切削速度(m/min)

Processing Speed

ZT挤压丝锥

ZT Forming Tap

◎：推荐 Excellent　○：适合 Good -：不推荐 Not recommended

以往品

卧式M/C加工寿命低 Conventional

In the case of a horizontal machining center,

the tool life is reduced

以往品 Conventional

以往品

Conventional

被削材

Work Material

1,000

2,000

5,000

4,000

3,000

0

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

加工孔数

No. of cutting holes

切削速度 Processing Speed 10m/min

Heat treated Steel

SCM440H 35HRC

1,181

4,376

4,500

14,400

4,000

16,000

12,000

8,000

0

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

加工孔数

No. of cutting holes

S50C

Carbon Steel

切削速度 Processing Speed 30m/min

2.694

12,050

高精度

High precision

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

螺纹尺寸：M6x1

底孔径：φ5.55

切削油 ：水溶性切削油剂

使用机械：立式M/C（BT30）

Size

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine: Vertical machining center

通过低扭矩设计、降低加工阻力、

抑制毛刺。实现内螺纹稳定加工。

Low torque specifications suppress

machining resistance and burrs.

It can be stable internal threads processing

内螺纹毛刺比较 Comparison of internal threads burr

SCM440H

（35HRC）

NAK55

(40HRC）

入口毛刺Burr at the entrance

良好

Good

良好

Good

内径毛刺

Burr at part of inner diameter

4.4倍

Times

3.7倍

Times

3.2倍

Times

切削锥部B形=2P、P形=4P Lc：B=2P、P=4P

1. 表中的数值是一般的基准，切削条件会根据使用状态不同而变化。

2. 表中的数值为攻丝深度2Dc（攻丝深度是直径的2D）的基准。

1.These are general cutting condition and may be altered by your condition. 2.These condition are for Thread depth of 2×D.

注）

※工具寿命由通规（GPII）判定

※Tool life is determined by the go thread plug gauge (GPII).

ZT挤压丝锥

ZT Forming Tap

挤压丝锥

2

■ 新的ZT涂层，兼具更好的耐磨损性、耐热性和低摩擦性

■ 新的油槽ZT刃形(PAT.P)、卧式M/C加工也能发挥高润滑性

■ 新的挤压丝锥专用材料同时兼顾韧性和硬度

■ 适合多种常见的被削材、有效提升长寿命和低扭矩

Overwhelmingly long tool life and low torque forming tap

■ Excellent wear resistance, heat resistance and low friction are achieved by the newly developed ZT coating

■ Newly developed oil groove ZT flute (PAT.P) demonstrates high lubrication performance even in horizontal machining center

■ Newly developed material for forming tap that has both toughness and hardness

■ Compatible with a wide range of work materials, achieving overwhelming long tool life and low torque

有效提升长寿命和低扭矩的挤压丝锥

■ 挤压部分牙形采用无同心圆设计

■ 由于接触面积变小、摩擦阻力也减小，实现加工

扭矩降低和抑制磨损

■ ZT涂层通过提高韧性的AlTi系膜和平滑化处理的组合，优化发挥膜性能

■ 平滑化处理使表面粗糙度变小、抑制施加到涂层上的负载和摩擦阻力。

■ ZT coating maximizes film performance by combining AlTi-based film that improved toughness, and Super smooth surface treatment

■ Super smooth surface treatment reduces surface roughness and suppresses coating load and frictional resistance

■ Marginless is adopted for forming parts of the thread

■ Wear resistance is suppressed by reducing the contact area,

　 reducing machining torque and suppressing wear progress

■ The newly developed oil groove shape ZT Flutes (PAT.P) widens the oil groove

　 deeply and greatly to improve the flow rate of cutting fluid

■ Demonstrates high lubrication performance

　 even in horizontal machining center where cutting fluid is difficult to reach

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

无同心圆

Marginless

有同心圆

Having margin

形状

Shape

涂层

Coating

ZT Forming Tap

NEW ZTF Product Info

Zenith

Toughness

同心圆部

Margin part

以往品

Conventional

ZT刃形（PAT.P）

ZT Flutes

硬度 Hardness

韧性Toughness

■ 挤压丝锥专用组织颗粒细化的新含钴高速钢材料开发

■ 高度钢母材兼顾韧性和高硬度化

■ Developed a new cobalt HSS with a finer structure exclusively for forming tap

■ Achieves high hardness while maintaining the toughness

　 of the high speed steel base material

材料

Material

低扭矩

Low torque

组织颗粒粗

高硬度材

High hardness

material

The texture of

the material

is coarse

组织颗粒细化

ZT Forming Tap

The texture of

the material is fine

以往材料

Conventional

material

有平滑化处理

ZT挤压丝锥

Having Super smooth surface treatment

ZT Forming Tap

无平滑化处理

Not having

Super smooth surface treatment

表面凹凸小

Surface roughness is

extremely small

表面凹凸大

Surface roughness is large

平滑化处理的有无

Having or not having

Super smooth surface treatment

ZT涂层

（AlTi系） TiCN系涂层

TiCN coating ZT coating (AlTi)

磨损小

Wear is small

磨损大

Wear is big

定数加工后的磨损比较

Wear comparison after constant machining

高硬度含钴高速钢

AlCrTi系膜

AlCrTi based film

AlTi系膜

AlTi based film

High hardness cobalt HSS

Wear resistance

Reinforced membrane

耐磨损性强化膜

Adhesion and toughness

Reinforced membrane

密着性・韧性 强化膜

平滑化处理

Super smooth surface treatment

■ 通过无同心圆•油槽形状和平滑化处理、抑制摩擦阻力

■ 即使是主轴扭矩问题或钢系材料，也能降低20%的加工扭矩

■ Friction resistance is suppressed by marginless,

　 oil groove shape and Super smooth surface treatment

■ 20% reduction in machining torque even for steel-based materials

　 where spindle torque is a problem

螺纹尺寸：M12x1.75

被削材：SCM440H（35HRC）

切削速度：10m/min

螺纹有效长：1.5D（18mm）

底孔径：φ11.2

切削油：水溶性切削油剂

使用机械：立式M/C（BT50）

Size

Workpiece

Processing Speed

Effective thread length

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine: Vertical machining center

-1,000

0

3,000

2,000

4,000

1,000

-2,000

扭矩Torque (Ncm)

加工扭矩比较 Comparison of processing torque

丝锥正转

Tap normal rotation

丝锥反转

Tap reverse rotation

降低约20%

Approximately

20% reduction

时间 (s)

Time

ーＺＴ挤压丝锥

ー以往品

1 2 3 4 5

油槽

Oil groove

外径

Major diameter

内螺纹内径

Minor diameter

油槽加深加大

Deep and wide oil groove

以往品

Conventional

卧式M/C冷却液流量的比较 Comparison of coolant flow rate in horizontal machining center

约1.3倍的流量

Approximately 1.3 times the flow rate

75mℓ 100mℓ

冷却液

Coolant 工件 Workpiece 螺纹尺寸：M12×1.75

切削速度：5m/min

切削油: 水溶性切削油剂

供油方式: 直通供油

一孔加工

Size

Processing Speed

Cutting Fluid: Water-soluble

Refueling method: Collet through

1 hole processing

ZT Forming Tap

Conventional

■ 新的油槽形状ZT刃形（PAT.P），油槽加深加大，

提升了切削油剂的流量

■ 切削油剂难冷却的卧式M/C，也能发挥高润滑性

ZT

挤压丝锥

ZT挤压丝锥

ZT Forming Tap

挤压丝锥 ZTF

ZT Forming Tap

规格1 2

3

单位（Unit）： mm

Code No.

3M0.5R

3M0.5R

4M0.7R

4M0.7R

5M0.8R

5M0.8R

6M1R

6M1R

8M1.25R

8M1.25R

8M1R

8M1R

10M1.5R

10M1.5R

10M1.25R

10M1.25R

10M1R

10M1R

12M1.75R

12M1.75R

12M1.5R

12M1.5R

12M1.25R

12M1.25R

12M1R

12M1R

14M2R

14M2R

14M1.5R

14M1.5R

16M2R

16M2R

16M1.5R

16M1.5R

编码

Thread Size

M3X0.5

M3X0.5

M4X0.7

M4X0.7

M5X0.8

M5X0.8

M6X1

M6X1

M8X1.25

M8X1.25

M8X1

M8X1

M10X1.5

M10X1.5

M10X1.25

M10X1.25

M10X1

M10X1

M12X1.75

M12X1.75

M12X1.5

M12X1.5

M12X1.25

M12X1.25

M12X1

M12X1

M14X2

M14X2

M14X1.5

M14X1.5

M16X2

M16X2

M16X1.5

M16X1.5

螺纹尺寸

Lc

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

P

B

切削锥部

LF

46

46

52

52

60

60

62

62

70

70

70

70

75

75

75

75

75

75

82

82

82

82

82

82

82

82

88

88

88

88

95

95

95

95

全长

THLGTH

5.6

5.6

8.1

8.1

9.4

9.4

9.0

9.0

11.6

11.6

9.3

9.3

14.2

14.2

11.8

11.8

9.3

9.3

16.8

16.8

15.7

15.7

12.9

12.9

10.1

10.1

19.4

19.4

15.7

15.7

19.4

19.4

15.7

15.7

螺纹长度

Lobes

5

5

5

5

5

5

5

5

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

沟槽数

DCON

4.0

4.0

5.0

5.0

5.5

5.5

6.0

6.0

6.2

6.2

6.2

6.2

7.0

7.0

7.0

7.0

7.0

7.0

8.5

8.5

8.5

8.5

8.5

8.5

8.5

8.5

10.5

10.5

10.5

10.5

12.5

12.5

12.5

12.5

柄径

DN

2.35

2.35

3.15

3.15

4.05

4.05

4.75

4.75

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

钻身直径

LU

18

18

20

20

22

22

24

24

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

钻颈长

Type

1

2

1

2

1

2

1

2

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

规格

Stock

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

库存

TAP Limit

等级

R5

R5

R6

R6

R6

R6

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R7

R8

R8

R7

R7

R7

R7

R7

R7

R10

R10

R9

R9

R10

R10

R9

R9

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

REG

●： 标准库存品 Stocked items

SS400

◎

10～50

◎

10～50

◎

10～40

◎

10～30

○

5～20

○

3～15

－

－

－

－

◎

10～50

一般

结构用钢

S15C

低碳素钢

S50C

高碳素钢

SCM、SCr

合金钢 调质钢

30～40HRC

推荐切削油剂

Cutting Fluids

水溶性油剂

Warter soluble Oil

水溶性油剂

Warter soluble Oil

高润滑水溶性

油剂或油性

Highly lubricated

water-soluble oil

or Oily

被削材选定基准表和切削速度

Selection Chart according to Work Materials and Standard Processing Condition

FCD

球墨铸铁

FC

铸铁

AC、ADC

铝合金

SUS

不锈钢

Structural

Steel

Low Carbon

Steel

◎

10～50

S40C

中碳素钢

Medium

Carbon Steel

High Carbon

Steel Alloy Steel

Heat treated

Steel

Ductile

Cast Iron Cast Iron

Aluminum

Alloy

Stainless

Steel

根据加工方式寿命比较 Comparison of tool life by processing direction

螺纹尺寸：M12x1.75

被削材：S50Ｃ

Size

Workpiece

切削速度：30m/min

螺纹有效长：1.5D（18mm）

Processing Speed

Effective thread length

底孔径：Φ11.2

切削油 ：水溶性切削油剂

Diameter of prepared hole

Cutting Fluid: Water-soluble

螺纹尺寸：M6x1

螺纹有效长：12mm（2D）

底孔径：φ5.55

切削油 ：水溶性切削油剂

使用机械 ：立式M/C

Size

Effective thread length

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine:Vertical machining center

1,540

2,685

ZT挤压丝锥

ZT Forming Tap

ZT挤压丝锥

ZT Forming Tap

3,000

6,000

12,000

9,000

0

加工孔数

No. of cutting holes

卧式M/C

Horizontal machining center

ZT挤压丝锥 ZT Forming Tap

无论加工方式，均有效提升长寿命

Overwhelmingly long tool life regardless

of the processing direction

立式M/C

Vertical machining center

8,911 9,290

长寿命

Long tool life

■ 与以往品相比，寿命是3倍以上

■ 切削油剂很难冷却的卧式M/C加工，

实现5倍以上的长寿命

■ Tool life is more than 3 times Conventional

■ Achieves a long tool life of 5 times or more

　 with horizontal machining center,

　 which is difficult for cutting fluid to reach

　 and whose tool life is likely to short

3.4倍

Times 5.7倍

Times

实现多种常见被削材长寿命

Achieves overwhelming long tool life with a wide range of work materials

多用途

Multipurpose

4,000

8,000

16,000

12,000

0

以往品

Conventional

加工孔数

No. of cutting holes

ADC12

Aluminum Alloy

切削速度 Processing Speed 70m/min

Lc

LF

THLGTH LU DN

DCON

DRVS

Lk

工具材料

HSS

Co涂层

ZT

LIST8800 订货方式 Order ZTF 编码 Code 切削锥部 Lc

选定表

Selection chart

切削速度(m/min)

Processing Speed

ZT挤压丝锥

ZT Forming Tap

◎：推荐 Excellent　○：适合 Good -：不推荐 Not recommended

以往品

卧式M/C加工寿命低 Conventional

In the case of a horizontal machining center,

the tool life is reduced

以往品 Conventional

以往品

Conventional

被削材

Work Material

1,000

2,000

5,000

4,000

3,000

0

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

加工孔数

No. of cutting holes

切削速度 Processing Speed 10m/min

Heat treated Steel

SCM440H 35HRC

1,181

4,376

4,500

14,400

4,000

16,000

12,000

8,000

0

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

加工孔数

No. of cutting holes

S50C

Carbon Steel

切削速度 Processing Speed 30m/min

2.694

12,050

高精度

High precision

以往品

Conventional

ZT挤压丝锥

ZT Forming Tap

螺纹尺寸：M6x1

底孔径：φ5.55

切削油 ：水溶性切削油剂

使用机械：立式M/C（BT30）

Size

Diameter of prepared hole

Cutting Fluid: Water-soluble

Machine: Vertical machining center

通过低扭矩设计、降低加工阻力、

抑制毛刺。实现内螺纹稳定加工。

Low torque specifications suppress

machining resistance and burrs.

It can be stable internal threads processing

内螺纹毛刺比较 Comparison of internal threads burr

SCM440H

（35HRC）

NAK55

(40HRC）

入口毛刺Burr at the entrance

良好

Good

良好

Good

内径毛刺

Burr at part of inner diameter

4.4倍

Times

3.7倍

Times

3.2倍

Times

切削锥部B形=2P、P形=4P Lc：B=2P、P=4P

1. 表中的数值是一般的基准，切削条件会根据使用状态不同而变化。

2. 表中的数值为攻丝深度2Dc（攻丝深度是直径的2D）的基准。

1.These are general cutting condition and may be altered by your condition. 2.These condition are for Thread depth of 2×D.

注）

※工具寿命由通规（GPII）判定

※Tool life is determined by the go thread plug gauge (GPII).

ZT挤压丝锥

ZT Forming Tap

挤压丝锥

3

500

1000

1500

2000

M3×0.5 M6×1

加工孔数

Cutting

holes

0

■SGSP-1.5P　■以往品 Old products 以往品 Old products 以往品 Old products

Cutting performance of short chamfer

短切削锥的切削性能

Optimization shape of chamfer can make tool life longer

SGSP-1.5P

SG 螺旋槽丝锥短切削锥型

合适的工具形状，实现长寿命

1600 1584

平均Average

1592

平均Average

2081

2164 1998

平均Average

815

830 799

平均Average

1297

1123 1470

切削条件

Cutting

condition

M3×0.5

M6×1

Thread size

螺纹尺寸

Water-soluble cutting fluid

(External coolant)

水溶性（外部给油）

Cutting Fluid

切削油剂

Vertical Machining Center

Vertical Machining Center

立形M/C BT30

立形M/C HSK63

Machine

使用机械

S50C（180HB）

Work Material

被削材

30m/min

Cutting speed

切削速度

3180min-1

1591min-1

Rotation

转速

1590mm/min

1591mm/min

Feed

进给速度

6mm

12mm

Thread depth

螺纹深度

（Blind holes）

（Blind holes）

φ2.6钻头 盲孔

φ5.1钻头 盲孔

Drill Hole Dia.

下穴径

SGSP-1.5P SGSP-1.5P

M3×0.5 1600孔加工后 磨损状态

M3×0.5 Wear After 1600 holes

M6×1 630孔加工后 磨损状态

M6×1 Wear After 630 holes

In combination with Flat drill, more shallow drill hole depth and deeper the effective thread length can be processed

与平头钻组合使用，可实现底孔深度更浅、有效螺纹长度更长的加工

产品样本

介绍

无毛刺加工、倾斜面加工一次完成的钻头

AQUA Drill EX FLAT

产品样本No. 2237-11

Catalogue

AQDEXZ ＋

SGSP-1.5P

传统加工

钻头+丝锥

Usual　Drill + Tap

AQDEXZ ＋

SGSP-1.5P

AQDEXZ SGSP-1.5P

切削锥

长度

1.5P

有效螺纹长度

Effective screw length

有效螺纹长度

Effective screw length

底孔深度

Drill hole depth

底孔深度

Drill hole depth

可使底孔深度

比传统加工更浅

It can shallower than

the conventional drill hole depth

可使螺纹深度

比传统加工更深

It can deeply than

the conventional screw depth

300

600

900

1200

Vc15 Vc30 Vc50 Vc75

加工孔数

Cutting holes

破坏扭矩

The breaking torsion torque

切削速度(m/min)

Cutting speeds

0

■SGSP

■以往品 Old products

不同切削速度时的加工状态与切削碎屑形状

可实现没有切削碎屑形状及加工状态变化的稳定加工

Cutting scenes and chips by every cutting speeds

Chips, cutting scenes does not have a change, and stable cutting screw threads is possible

加工状态

Cutting scene

切削碎屑形状Chips

SGSP

Vc5 Vc15 Vc30 Vc50 Vc75

S50C

Comparison of cutting holes by cutting speeds

不同切削速度时的加工孔数比较

Comparison of wear after cutting 210 holes by cutting speed Vc30

切削速度Vc30、加工210个孔后的磨耗比较

SG-coating

SG涂层

切削条件 Cutting condition

螺纹尺寸

被削材

Thread size

Work Material

M6×1

S50C（180HB）

螺纹深度

螺纹底孔直径

Thread depth

Drill Hole Dia.

12mm

φ5.1

螺纹底孔深度

进给

Drill Hole depth

Feed

（Blind holes）

Synchronized feed

20mm（盲孔）

同步进给

夹头

切削油剂 水溶性（外部冷却）

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Collet chuck

筒夹 使用设备

Machine Vertical Machining Center

立式M/C HSK63

以往品 SGSP

Old products

产生碎屑，使用寿命不稳定

Chipping occurs, and life is not stable

可使用智能手机

及手机观看

加工视频。

W E B VI D E O

TiCN类微细多层膜

TiCN base multi-layer

高级粉末高速钢基材

High grade

powder HSS base layer

以往品 SGSP Old products

SG 丝锥系列

No matter what cutting speeds, stable cutting screw threads and long tool life

SGSP

螺旋丝锥

多样化的切削速度选择，可实现稳定的螺纹加工和长寿命

■采用高级粉末高速钢与SG涂层，实现长的丝锥使用寿命

通过优化刃尖、沟槽形状，提高刚性及切削碎屑处理性，实现稳定的螺纹加工

通用性高，无被削材、加工机械、切削条件限制，可发挥更好的性能

■

■

■ The longest tool life by high grade powder HSS and SG coat.

■ Stable cutting screw threads improve rigidity and chips ejecti on by optimizing the edge and flute shape.

■ High performance without choosing work material, machine, cutting condition with high flexibility.

破坏扭矩比以往品高

30％，不易折断

The breaking torque of SGSP is

30% bigger than old products, SGSP hardly breaks

基材

在多层膜的边界部分

抑制疲劳裂纹扩展

To control fatigue crack propagation

in border parts of the multi-layer

SG Tap series

Please scan QR

code by smart

phones or mobile

phones.

You can watch

videos of SG tap.

为了拍照，采用干式加工。

In dry process to take pictures

丝锥系列

从一般钢到不锈钢、铝合金，可确保稳定的切削碎屑形状与加工状态

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP S50C SS400

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP SUS304 A5052

切削条件 Tapping Condition

夹头

切削油剂

使用设备

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Machine

筒夹

水溶性（外部冷却）

立式M/C BT30

Collet chuck

Vertical Machining Center

公称直径

被削材

螺纹深度

切削速度

Thread size

Work Material

Thread depth

Cutting speed

M6X1

SUS304

12mm

8m/min

螺纹底孔直径

螺纹底孔深度

进给速度 425mm/min（同步进给）

Drill Hole Dia.

Drill Hole depth

Feed(Synchronized feed)

转速 425min-1

Rotation

φ5.1

19mm（通孔） （Through holes）

Stable chips and cutting scene from Structural Steels to Stainless Steels, Aluminum Alloys

Corresponding to every work materials

SGSP

ＳＧ螺旋丝锥

可满足多种被削材的要求

加工孔数

Cutting holes

平均 209个孔 Average

Long tool life with Stainless Steels

即使切削不锈钢，也可实现长寿命。

SGSP

577

314

419

以往品

Old products

46

246

335

切削碎屑搅在

一起 导致折断

平均 437个孔 Average

AQUAEX平头钻

500

1000

1500

2000

M3×0.5 M6×1

加工孔数

Cutting

holes

0

■SGSP-1.5P　■以往品 Old products 以往品 Old products 以往品 Old products

Cutting performance of short chamfer

短切削锥的切削性能

Optimization shape of chamfer can make tool life longer

SGSP-1.5P

SG 螺旋槽丝锥短切削锥型

合适的工具形状，实现长寿命

1600 1584

平均Average

1592

平均Average

2081

2164 1998

平均Average

815

830 799

平均Average

1297

1123 1470

切削条件

Cutting

condition

M3×0.5

M6×1

Thread size

螺纹尺寸

Water-soluble cutting fluid

(External coolant)

水溶性（外部给油）

Cutting Fluid

切削油剂

Vertical Machining Center

Vertical Machining Center

立形M/C BT30

立形M/C HSK63

Machine

使用机械

S50C（180HB）

Work Material

被削材

30m/min

Cutting speed

切削速度

3180min-1

1591min-1

Rotation

转速

1590mm/min

1591mm/min

Feed

进给速度

6mm

12mm

Thread depth

螺纹深度

（Blind holes）

（Blind holes）

φ2.6钻头 盲孔

φ5.1钻头 盲孔

Drill Hole Dia.

下穴径

SGSP-1.5P SGSP-1.5P

M3×0.5 1600孔加工后 磨损状态

M3×0.5 Wear After 1600 holes

M6×1 630孔加工后 磨损状态

M6×1 Wear After 630 holes

In combination with Flat drill, more shallow drill hole depth and deeper the effective thread length can be processed

与平头钻组合使用，可实现底孔深度更浅、有效螺纹长度更长的加工

产品样本

介绍

无毛刺加工、倾斜面加工一次完成的钻头

AQUA Drill EX FLAT

产品样本No. 2237-11

Catalogue

AQDEXZ ＋

SGSP-1.5P

传统加工

钻头+丝锥

Usual　Drill + Tap

AQDEXZ ＋

SGSP-1.5P

AQDEXZ SGSP-1.5P

切削锥

长度

1.5P

有效螺纹长度

Effective screw length

有效螺纹长度

Effective screw length

底孔深度

Drill hole depth

底孔深度

Drill hole depth

可使底孔深度

比传统加工更浅

It can shallower than

the conventional drill hole depth

可使螺纹深度

比传统加工更深

It can deeply than

the conventional screw depth

300

600

900

1200

Vc15 Vc30 Vc50 Vc75

加工孔数

Cutting holes

破坏扭矩

The breaking torsion torque

切削速度(m/min)

Cutting speeds

0

■SGSP

■以往品 Old products

不同切削速度时的加工状态与切削碎屑形状

可实现没有切削碎屑形状及加工状态变化的稳定加工

Cutting scenes and chips by every cutting speeds

Chips, cutting scenes does not have a change, and stable cutting screw threads is possible

加工状态

Cutting scene

切削碎屑形状Chips

SGSP

Vc5 Vc15 Vc30 Vc50 Vc75

S50C

Comparison of cutting holes by cutting speeds

不同切削速度时的加工孔数比较

Comparison of wear after cutting 210 holes by cutting speed Vc30

切削速度Vc30、加工210个孔后的磨耗比较

SG-coating

SG涂层

切削条件 Cutting condition

螺纹尺寸

被削材

Thread size

Work Material

M6×1

S50C（180HB）

螺纹深度

螺纹底孔直径

Thread depth

Drill Hole Dia.

12mm

φ5.1

螺纹底孔深度

进给

Drill Hole depth

Feed

（Blind holes）

Synchronized feed

20mm（盲孔）

同步进给

夹头

切削油剂 水溶性（外部冷却）

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Collet chuck

筒夹 使用设备

Machine Vertical Machining Center

立式M/C HSK63

以往品 SGSP

Old products

产生碎屑，使用寿命不稳定

Chipping occurs, and life is not stable

可使用智能手机

及手机观看

加工视频。

W E B VI D E O

TiCN类微细多层膜

TiCN base multi-layer

高级粉末高速钢基材

High grade

powder HSS base layer

以往品 SGSP Old products

SG 丝锥系列

No matter what cutting speeds, stable cutting screw threads and long tool life

SGSP

螺旋丝锥

多样化的切削速度选择，可实现稳定的螺纹加工和长寿命

■采用高级粉末高速钢与SG涂层，实现长的丝锥使用寿命

通过优化刃尖、沟槽形状，提高刚性及切削碎屑处理性，实现稳定的螺纹加工

通用性高，无被削材、加工机械、切削条件限制，可发挥更好的性能

■

■

■ The longest tool life by high grade powder HSS and SG coat.

■ Stable cutting screw threads improve rigidity and chips ejecti on by optimizing the edge and flute shape.

■ High performance without choosing work material, machine, cutting condition with high flexibility.

破坏扭矩比以往品高

30％，不易折断

The breaking torque of SGSP is

30% bigger than old products, SGSP hardly breaks

基材

在多层膜的边界部分

抑制疲劳裂纹扩展

To control fatigue crack propagation

in border parts of the multi-layer

SG Tap series

Please scan QR

code by smart

phones or mobile

phones.

You can watch

videos of SG tap.

为了拍照，采用干式加工。

In dry process to take pictures

丝锥系列

从一般钢到不锈钢、铝合金，可确保稳定的切削碎屑形状与加工状态

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP S50C SS400

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP SUS304 A5052

切削条件 Tapping Condition

夹头

切削油剂

使用设备

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Machine

筒夹

水溶性（外部冷却）

立式M/C BT30

Collet chuck

Vertical Machining Center

公称直径

被削材

螺纹深度

切削速度

Thread size

Work Material

Thread depth

Cutting speed

M6X1

SUS304

12mm

8m/min

螺纹底孔直径

螺纹底孔深度

进给速度 425mm/min（同步进给）

Drill Hole Dia.

Drill Hole depth

Feed(Synchronized feed)

转速 425min-1

Rotation

φ5.1

19mm（通孔） （Through holes）

Stable chips and cutting scene from Structural Steels to Stainless Steels, Aluminum Alloys

Corresponding to every work materials

SGSP

ＳＧ螺旋丝锥

可满足多种被削材的要求

加工孔数

Cutting holes

平均 209个孔 Average

Long tool life with Stainless Steels

即使切削不锈钢，也可实现长寿命。

SGSP

577

314

419

以往品

Old products

46

246

335

切削碎屑搅在

一起 导致折断

平均 437个孔 Average

AQUAEX平头钻

4

500

1000

1500

2000

M3×0.5 M6×1

加工孔数

Cutting

holes

0

■SGSP-1.5P　■以往品 Old products 以往品 Old products 以往品 Old products

Cutting performance of short chamfer

短切削锥的切削性能

Optimization shape of chamfer can make tool life longer

SGSP-1.5P

SG 螺旋槽丝锥短切削锥型

合适的工具形状，实现长寿命

1600 1584

平均Average

1592

平均Average

2081

2164 1998

平均Average

815

830 799

平均Average

1297

1123 1470

切削条件

Cutting

condition

M3×0.5

M6×1

Thread size

螺纹尺寸

Water-soluble cutting fluid

(External coolant)

水溶性（外部给油）

Cutting Fluid

切削油剂

Vertical Machining Center

Vertical Machining Center

立形M/C BT30

立形M/C HSK63

Machine

使用机械

S50C（180HB）

Work Material

被削材

30m/min

Cutting speed

切削速度

3180min-1

1591min-1

Rotation

转速

1590mm/min

1591mm/min

Feed

进给速度

6mm

12mm

Thread depth

螺纹深度

（Blind holes）

（Blind holes）

φ2.6钻头 盲孔

φ5.1钻头 盲孔

Drill Hole Dia.

下穴径

SGSP-1.5P SGSP-1.5P

M3×0.5 1600孔加工后 磨损状态

M3×0.5 Wear After 1600 holes

M6×1 630孔加工后 磨损状态

M6×1 Wear After 630 holes

In combination with Flat drill, more shallow drill hole depth and deeper the effective thread length can be processed

与平头钻组合使用，可实现底孔深度更浅、有效螺纹长度更长的加工

产品样本

介绍

无毛刺加工、倾斜面加工一次完成的钻头

AQUA Drill EX FLAT

产品样本No. 2237-11

Catalogue

AQDEXZ ＋

SGSP-1.5P

传统加工

钻头+丝锥

Usual　Drill + Tap

AQDEXZ ＋

SGSP-1.5P

AQDEXZ SGSP-1.5P

切削锥

长度

1.5P

有效螺纹长度

Effective screw length

有效螺纹长度

Effective screw length

底孔深度

Drill hole depth

底孔深度

Drill hole depth

可使底孔深度

比传统加工更浅

It can shallower than

the conventional drill hole depth

可使螺纹深度

比传统加工更深

It can deeply than

the conventional screw depth

300

600

900

1200

Vc15 Vc30 Vc50 Vc75

加工孔数

Cutting holes

破坏扭矩

The breaking torsion torque

切削速度(m/min)

Cutting speeds

0

■SGSP

■以往品 Old products

不同切削速度时的加工状态与切削碎屑形状

可实现没有切削碎屑形状及加工状态变化的稳定加工

Cutting scenes and chips by every cutting speeds

Chips, cutting scenes does not have a change, and stable cutting screw threads is possible

加工状态

Cutting scene

切削碎屑形状Chips

SGSP

Vc5 Vc15 Vc30 Vc50 Vc75

S50C

Comparison of cutting holes by cutting speeds

不同切削速度时的加工孔数比较

Comparison of wear after cutting 210 holes by cutting speed Vc30

切削速度Vc30、加工210个孔后的磨耗比较

SG-coating

SG涂层

切削条件 Cutting condition

螺纹尺寸

被削材

Thread size

Work Material

M6×1

S50C（180HB）

螺纹深度

螺纹底孔直径

Thread depth

Drill Hole Dia.

12mm

φ5.1

螺纹底孔深度

进给

Drill Hole depth

Feed

（Blind holes）

Synchronized feed

20mm（盲孔）

同步进给

夹头

切削油剂 水溶性（外部冷却）

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Collet chuck

筒夹 使用设备

Machine Vertical Machining Center

立式M/C HSK63

以往品 SGSP

Old products

产生碎屑，使用寿命不稳定

Chipping occurs, and life is not stable

可使用智能手机

及手机观看

加工视频。

W E B VI D E O

TiCN类微细多层膜

TiCN base multi-layer

高级粉末高速钢基材

High grade

powder HSS base layer

以往品 SGSP Old products

SG 丝锥系列

No matter what cutting speeds, stable cutting screw threads and long tool life

SGSP

螺旋丝锥

多样化的切削速度选择，可实现稳定的螺纹加工和长寿命

■采用高级粉末高速钢与SG涂层，实现长的丝锥使用寿命

通过优化刃尖、沟槽形状，提高刚性及切削碎屑处理性，实现稳定的螺纹加工

通用性高，无被削材、加工机械、切削条件限制，可发挥更好的性能

■

■

■ The longest tool life by high grade powder HSS and SG coat.

■ Stable cutting screw threads improve rigidity and chips ejecti on by optimizing the edge and flute shape.

■ High performance without choosing work material, machine, cutting condition with high flexibility.

破坏扭矩比以往品高

30％，不易折断

The breaking torque of SGSP is

30% bigger than old products, SGSP hardly breaks

基材

在多层膜的边界部分

抑制疲劳裂纹扩展

To control fatigue crack propagation

in border parts of the multi-layer

SG Tap series

Please scan QR

code by smart

phones or mobile

phones.

You can watch

videos of SG tap.

为了拍照，采用干式加工。

In dry process to take pictures

丝锥系列

从一般钢到不锈钢、铝合金，可确保稳定的切削碎屑形状与加工状态

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP S50C SS400

加工状态

Cutting scene

切削碎屑形状

Chips

SGSP SUS304 A5052

切削条件 Tapping Condition

夹头

切削油剂

使用设备

Holder

Cutting Fluid/Water-soluble cutting fluid（External coolant）

Machine

筒夹

水溶性（外部冷却）

立式M/C BT30

Collet chuck

Vertical Machining Center

公称直径

被削材

螺纹深度

切削速度

Thread size

Work Material

Thread depth

Cutting speed

M6X1

SUS304

12mm

8m/min

螺纹底孔直径

螺纹底孔深度

进给速度 425mm/min（同步进给）

Drill Hole Dia.

Drill Hole depth

Feed(Synchronized feed)

转速 425min-1

Rotation

φ5.1

19mm（通孔） （Through holes）

Stable chips and cutting scene from Structural Steels to Stainless Steels, Aluminum Alloys

Corresponding to every work materials

SGSP

ＳＧ螺旋丝锥

可满足多种被削材的要求

加工孔数

Cutting holes

平均 209个孔 Average

Long tool life with Stainless Steels

即使切削不锈钢，也可实现长寿命。

SGSP

577

314

419

以往品

Old products

46

246

335

切削碎屑搅在

一起 导致折断

平均 437个孔 Average

AQUAEX平头钻

5

螺旋槽丝锥

0

2000

1000

3000

4000

0

2000

1000

3000

4000

3352

4377

0

1000

2000

3000

560 New style of innovative taps crystallized of the best NACHI technology

■ Using the NACHI owned material development technology, heat treatment, grinding technology

■ According the mechanical processing principle and wear analysis of the gear cutting tool and broach processing technology,

using the best shape design, small fluctuations in life to achieve stable processing

■ Played a superior and efficient performance in the field of low-medium speed, 2x～3x life than non-coated taps. Its long processing life also surpasses the coating taps

800孔加工后

After 800 holes

1800孔加工后

After 1800 holes

切削速度

Cutting speed

某TiCN涂层螺旋槽丝锥

old A TiCN coated Spiral Tap

某TiCN涂层

螺旋槽丝锥

1800

old A TiCN coated Spiral Tap

20m/min

Hyper Z Spiral Tap

2343

Hyper Z Spiral Tap

涂层品相同条件

20m/min

The same conditions with the coating tap

某无表面处理螺旋槽丝锥

old A non-coated Spiral Tap

某无表面处理

螺旋槽丝锥

old A non-coated Spiral Tap

800

普通条件

General conditions

10m/min

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

切削速度：25m/min

加工深度：24ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：10m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：20m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝刀柄

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Blind hole)

Machining centers/Auto tapper

Water-soluble cutting oil

加工孔数

Number of holes

加工孔数

Number of holes

加工孔数

Number of holes

寿命比较

Compare machining life

某无表面处理丝锥比较

Compare other non-coated taps

某涂层丝锥比较

Compare other coating taps

寿命比较

Compare machining life

切削速度

Comparison of wear

某TiCN涂层螺尖丝锥

A TiCN coated Point Tap Hyper Z Point Tap

某无表面处理螺尖丝锥

A non-coated Point Tap Hyper Z Point Tap

某TiN涂层螺旋槽丝锥

old A TiN coated Spiral Tap Hyper Z Spiral Tap

集NACHI技术之大成

新一代革新丝锥诞生

■ 集结了NACHI从材料开发、热处理、研磨、到表面处理等

切削评估多种技术，运用齿轮刀具及拉刀的切削技术

■ 根据加工机械性与磨耗分析采用优良设计，寿命波动少实现稳定加工

■ 低速～中速领域高性能发挥，

寿命是无涂层丝锥的２～３倍，对比涂层丝锥也兼具了长寿命

Abnormal wear

异常磨损

Chipping

崩刃

Wear large

磨损大

Wear small,

can continue processing

磨损小，可继续加工

通孔用的螺尖丝锥对比某无表面处理品也能实现2倍以上的工具寿命，与某涂层品相比同样有出色的表现 The life of point taps is 2x as high as that of the non-coated taps, and is longer the that of the coating taps

通孔用螺尖丝锥也能在低速~中速领域发挥更长的工具寿命

Point taps for through-holes also have excellent tool life performance in medium - and low - speed field

对比某TiN涂层螺旋槽丝锥，实现无崩刃和异常磨损具有出色的长寿命

Compared with other brand coated tap, no chipping, no abnormal wear, and to achieve an overwhelming long processing life

有效的提升稳定性和长寿命

Compared to other brands of coated taps have high stability and overwhelming the long processing life

切削速度是某无表面处理丝锥的2倍、丝锥寿命为2.5倍以上，对比某涂层丝锥也有更长的长寿命发挥 In 2 times cutting speed of the general non-coated tap, there are more than 2.5 times tool life. There are long tools life of the coating taps over other brands

低速～中速领域加工实现出色的稳定性和长寿命

In the low to medium speed field with outstanding high stability and long life

2195

4488

加工孔数

Number of holes

560孔加工后

After 560 holes

某TiN涂层螺旋槽丝锥 other A TiN coated Spiral Tap Hyper Z Spiral Tap

磨损比较

Comparison of wear

Wear small,

can continue processing

磨损小，可继续加工

Abnormal wear

异常磨损

Chipping

崩刃

1000

500

1500

2000

2500

0

2837

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

加工深度：２４ｍｍ（通孔）

刀柄：自动攻丝刀柄

使用机械：加工中心

水溶性切削油剂

Thread size

Workpiece material

Depth(Blind hole)

Holder:Auto tapper

Machine:Machining centers

Water-soluble cutting oil

螺尖丝锥

螺尖丝锥

丝锥系列

螺旋槽丝锥

螺旋槽丝锥

螺旋槽丝锥

螺旋槽丝锥

0

2000

1000

3000

4000

0

2000

1000

3000

4000

3352

4377

0

1000

2000

3000

560 New style of innovative taps crystallized of the best NACHI technology

■ Using the NACHI owned material development technology, heat treatment, grinding technology

■ According the mechanical processing principle and wear analysis of the gear cutting tool and broach processing technology,

using the best shape design, small fluctuations in life to achieve stable processing

■ Played a superior and efficient performance in the field of low-medium speed, 2x～3x life than non-coated taps. Its long processing life also surpasses the coating taps

800孔加工后

After 800 holes

1800孔加工后

After 1800 holes

切削速度

Cutting speed

某TiCN涂层螺旋槽丝锥

old A TiCN coated Spiral Tap

某TiCN涂层

螺旋槽丝锥

1800

old A TiCN coated Spiral Tap

20m/min

Hyper Z Spiral Tap

2343

Hyper Z Spiral Tap

涂层品相同条件

20m/min

The same conditions with the coating tap

某无表面处理螺旋槽丝锥

old A non-coated Spiral Tap

某无表面处理

螺旋槽丝锥

old A non-coated Spiral Tap

800

普通条件

General conditions

10m/min

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

切削速度：25m/min

加工深度：24ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：10m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：20m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝刀柄

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Blind hole)

Machining centers/Auto tapper

Water-soluble cutting oil

加工孔数

Number of holes

加工孔数

Number of holes

加工孔数

Number of holes

寿命比较

Compare machining life

某无表面处理丝锥比较

Compare other non-coated taps

某涂层丝锥比较

Compare other coating taps

寿命比较

Compare machining life

切削速度

Comparison of wear

某TiCN涂层螺尖丝锥

A TiCN coated Point Tap Hyper Z Point Tap

某无表面处理螺尖丝锥

A non-coated Point Tap Hyper Z Point Tap

某TiN涂层螺旋槽丝锥

old A TiN coated Spiral Tap Hyper Z Spiral Tap

集NACHI技术之大成

新一代革新丝锥诞生

■ 集结了NACHI从材料开发、热处理、研磨、到表面处理等

切削评估多种技术，运用齿轮刀具及拉刀的切削技术

■ 根据加工机械性与磨耗分析采用优良设计，寿命波动少实现稳定加工

■ 低速～中速领域高性能发挥，

寿命是无涂层丝锥的２～３倍，对比涂层丝锥也兼具了长寿命

Abnormal wear

异常磨损

Chipping

崩刃

Wear large

磨损大

Wear small,

can continue processing

磨损小，可继续加工

通孔用的螺尖丝锥对比某无表面处理品也能实现2倍以上的工具寿命，与某涂层品相比同样有出色的表现 The life of point taps is 2x as high as that of the non-coated taps, and is longer the that of the coating taps

通孔用螺尖丝锥也能在低速~中速领域发挥更长的工具寿命

Point taps for through-holes also have excellent tool life performance in medium - and low - speed field

对比某TiN涂层螺旋槽丝锥，实现无崩刃和异常磨损具有出色的长寿命

Compared with other brand coated tap, no chipping, no abnormal wear, and to achieve an overwhelming long processing life

有效的提升稳定性和长寿命

Compared to other brands of coated taps have high stability and overwhelming the long processing life

切削速度是某无表面处理丝锥的2倍、丝锥寿命为2.5倍以上，对比某涂层丝锥也有更长的长寿命发挥 In 2 times cutting speed of the general non-coated tap, there are more than 2.5 times tool life. There are long tools life of the coating taps over other brands

低速～中速领域加工实现出色的稳定性和长寿命

In the low to medium speed field with outstanding high stability and long life

2195

4488

加工孔数

Number of holes

560孔加工后

After 560 holes

某TiN涂层螺旋槽丝锥 other A TiN coated Spiral Tap Hyper Z Spiral Tap

磨损比较

Comparison of wear

Wear small,

can continue processing

磨损小，可继续加工

Abnormal wear

异常磨损

Chipping

崩刃

1000

500

1500

2000

2500

0

2837

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

加工深度：２４ｍｍ（通孔）

刀柄：自动攻丝刀柄

使用机械：加工中心

水溶性切削油剂

Thread size

Workpiece material

Depth(Blind hole)

Holder:Auto tapper

Machine:Machining centers

Water-soluble cutting oil

螺尖丝锥

螺尖丝锥

丝锥系列

螺旋槽丝锥

螺旋槽丝锥

螺旋槽丝锥

6

螺旋槽丝锥

0

2000

1000

3000

4000

0

2000

1000

3000

4000

3352

4377

0

1000

2000

3000

560 New style of innovative taps crystallized of the best NACHI technology

■ Using the NACHI owned material development technology, heat treatment, grinding technology

■ According the mechanical processing principle and wear analysis of the gear cutting tool and broach processing technology,

using the best shape design, small fluctuations in life to achieve stable processing

■ Played a superior and efficient performance in the field of low-medium speed, 2x～3x life than non-coated taps. Its long processing life also surpasses the coating taps

800孔加工后

After 800 holes

1800孔加工后

After 1800 holes

切削速度

Cutting speed

某TiCN涂层螺旋槽丝锥

old A TiCN coated Spiral Tap

某TiCN涂层

螺旋槽丝锥

1800

old A TiCN coated Spiral Tap

20m/min

Hyper Z Spiral Tap

2343

Hyper Z Spiral Tap

涂层品相同条件

20m/min

The same conditions with the coating tap

某无表面处理螺旋槽丝锥

old A non-coated Spiral Tap

某无表面处理

螺旋槽丝锥

old A non-coated Spiral Tap

800

普通条件

General conditions

10m/min

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

切削速度：25m/min

加工深度：24ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：10m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝机

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Through hole)

Machining centers/Auto tapper

Water-soluble cutting oil

切削条件 Cutting condition

螺纹尺寸：Ｍ３×０．５

被削材：Ｓ５０Ｃ

切削速度：20m/min

加工深度：６ｍｍ（通孔）

加工中心/自动攻丝刀柄

水溶性切削油剂

Thread size

Workpiece material

Cutting speed

Depth(Blind hole)

Machining centers/Auto tapper

Water-soluble cutting oil

加工孔数

Number of holes

加工孔数

Number of holes

加工孔数

Number of holes

寿命比较

Compare machining life

某无表面处理丝锥比较

Compare other non-coated taps

某涂层丝锥比较

Compare other coating taps

寿命比较

Compare machining life

切削速度

Comparison of wear

某TiCN涂层螺尖丝锥

A TiCN coated Point Tap Hyper Z Point Tap

某无表面处理螺尖丝锥

A non-coated Point Tap Hyper Z Point Tap

某TiN涂层螺旋槽丝锥

old A TiN coated Spiral Tap Hyper Z Spiral Tap

集NACHI技术之大成

新一代革新丝锥诞生

■ 集结了NACHI从材料开发、热处理、研磨、到表面处理等

切削评估多种技术，运用齿轮刀具及拉刀的切削技术

■ 根据加工机械性与磨耗分析采用优良设计，寿命波动少实现稳定加工

■ 低速～中速领域高性能发挥，

寿命是无涂层丝锥的２～３倍，对比涂层丝锥也兼具了长寿命

Abnormal wear

异常磨损

Chipping

崩刃

Wear large

磨损大

Wear small,

can continue processing

磨损小，可继续加工

通孔用的螺尖丝锥对比某无表面处理品也能实现2倍以上的工具寿命，与某涂层品相比同样有出色的表现 The life of point taps is 2x as high as that of the non-coated taps, and is longer the that of the coating taps

通孔用螺尖丝锥也能在低速~中速领域发挥更长的工具寿命

Point taps for through-holes also have excellent tool life performance in medium - and low - speed field

对比某TiN涂层螺旋槽丝锥，实现无崩刃和异常磨损具有出色的长寿命

Compared with other brand coated tap, no chipping, no abnormal wear, and to achieve an overwhelming long processing life

有效的提升稳定性和长寿命

Compared to other brands of coated taps have high stability and overwhelming the long processing life

切削速度是某无表面处理丝锥的2倍、丝锥寿命为2.5倍以上，对比某涂层丝锥也有更长的长寿命发挥 In 2 times cutting speed of the general non-coated tap, there are more than 2.5 times tool life. There are long tools life of the coating taps over other brands

低速～中速领域加工实现出色的稳定性和长寿命

In the low to medium speed field with outstanding high stability and long life

2195

4488

加工孔数

Number of holes

560孔加工后

After 560 holes

某TiN涂层螺旋槽丝锥 other A TiN coated Spiral Tap Hyper Z Spiral Tap

磨损比较

Comparison of wear

Wear small,

can continue processing

磨损小，可继续加工

Abnormal wear

异常磨损

Chipping

崩刃

1000

500

1500

2000

2500

0

2837

切削条件 Cutting condition

螺纹尺寸：Ｍ１２×１．７５

被削材：Ｓ５０Ｃ

加工深度：２４ｍｍ（通孔）

刀柄：自动攻丝刀柄

使用机械：加工中心

水溶性切削油剂

Thread size

Workpiece material

Depth(Blind hole)

Holder:Auto tapper

Machine:Machining centers

Water-soluble cutting oil

螺尖丝锥

螺尖丝锥

丝锥系列

螺旋槽丝锥

螺旋槽丝锥

螺旋槽丝锥

7

NSP

N螺旋丝锥

N 丝锥系列

N series

■By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads can have long tool life

■Stable cutting screw threads by high rigidity design

■采用适合丝锥的加工特性的高钒高速钢，虽然是通用丝锥，也可实现长寿命

■采用高刚性设计，可实现稳定的螺纹加工

旧款产品

Old products

NSP

我司旧款A

Old products A

我司旧款B

Old products B

NSP

加工孔数

Cutting holes

Comparison of tool life

寿命比较

The breaking torsion torque

破坏扭矩

平均156孔Average

平均230孔Average

平均330孔Average

我司旧款B

Old products B

破坏扭矩

The breaking torsion torque

我司旧款A NSP

Old products A

強

破坏扭矩比通用产品高出20%，刚性大、不易折断，

可实现稳定的加工

The breaking torsion torque of NSP is 20% bigger than competitor

Rigidity of NSP is high and hardly breaks, so NSP is stable cutting screw threads

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

加工深度

使用机械

刀柄

切削油剂

Thread size

Work Material

Cutting speed

Depth of Cutting

Machine

Holder

Cutting Fluid

M12X1.75

S50C

10m/min

18mm（盲孔）

立形M/C

自动攻丝刀柄

水溶性切削油剂

Auto tapper

Water-soluble cutting fluid

Vertical M/C

STSP

螺旋槽丝锥

ST丝锥系列

ST series

■From materials to heat treatment and manufacturing, our SG tap, Hyper Z tap technology was inherited

■Optimized design for multipurpose usage

■从材料的热处理到制造，是现系列SG丝锥、

Hyper Z丝锥技术力量的继承

■重视通用性采用适合的形状设计 EHT

直槽丝锥

EXCEL 丝锥系列

EXCEL series

TAFLET 丝锥系列

TAFLET series

超硬丝锥适合铸铁、非铁金属及树脂等加工。 Carbide tap is the most suitable for cast iron, nonferrous metal and resin

TFL

TAFLET-L

■Taflet series cuts internal threads by forming the threads by a plastic flow of the work material

■Internal threads are cut by Taflet series has good points

■TAFLET系列通过被削材的塑性流动挤压出螺纹，形成内螺纹。

■使用TAFLET系列加工出来的内螺纹具备更好的特性。

切削条件

Cutting

condition

加工个数

The number

of cutting car part

以往品A

Other products A

以往品B

Other products B

以往品C

Other products C

EHT

Cutting example of car part

汽车零部件的切削案例

0

10,000

20,000

30,000

40,000

切削条件

Cutting

condition

加工个数

The number

of cutting car part

0

20,000

40,000

60,000

EHT

(VC30)

以往品HSS直槽丝锥HSS hand tap(VC7)

切削速度

进给速度

转数

Cutting speed

Feed

Rotation

7m/min

370mm/min

740min-1

Work Material

Cutting Fluid/Air blow

被削材

切削油剂

螺纹直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M3×0.5

6mm

φ2.6

FRP（含玻璃纤维）

气冷

切削速度

进给速度

转数

Cutting speed

Feed

Rotation

7m/min

370mm/min

370min-1

Work Material

Cutting Fluid/Air blow

被削材

切削油剂

ADC12

气冷

螺纹直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M6×1

15mm

φ5.1

挤压丝锥 Taflet

径向部分

Radial part

使用TAFLET

加工的内螺纹 缓降部分

Relief drop part

提高内螺纹强度！

纤维流线不会被切断

Higher thread strength!

Fiber flow is not cut

Internal threads are cut

by Taflet

Cutting tap

使用切削丝锥

加工的内螺纹

Internal threads are cut

by cutting tap

Cutting Fiber flow

切削丝锥

沟槽

Flute

钻腹

Web

刃背

Land

纤维流线被破坏

Item

项目

丝锥折断

切屑导致的故障

内螺纹的精度

内螺纹的表面粗糙度

攻丝扭矩

内螺纹的强度

被加工材

Breakage

Chips trouble

Precision of internal threads

Surface roughness of internal threads

Tapping torque

Strength of internal threads

Work material

TAFLET的特性Characteristic of Taflet

没有沟槽，不易折断。

不产生切屑，不会引起故障。

挤压加工，偏差小。

沿丝锥表面形成螺纹，螺纹表面状态好。

切削丝锥的1.5~2.5倍

塑性加工，纤维流线连续不断裂，强度好。

只限延展性较好的材料。

Hardly breaking because there is no flute

Free from troubles because no chips are produced

Dispersion is small because forming threads

Extremely good quality because of sliding on the tap face

1.5 to 2.5 times higher than the cutting tap

Strong because fiber flow is not being cut by plastic cutting

Limited to high-ductility materials

切削丝锥

Cutting tap

×

×

×

×

○

×

○

公称直径 M10×1.25

Thread size

TAFLET

Taflet

ADC12

145

切削丝锥

Cutting tap

ADC12

98

S10C

640

S10C

破损负荷（k 410 g f） Breaking load

内螺纹强度提高Strength of

internal threads up

強

TAFLET

Taflet

○

○

○

○

×

◎

×

0

200

400

600

加工孔数（个）

No. of thread holes

寿命比較

Compare machining life

430

STSP

280

我司旧款无表面处理通用丝锥other’s without surface treatment multipurpose tap

我司旧款无表面处理通用丝锥 STSP other’s without surface treatment multipurpose tap

280孔加工后

After 280 machining

磨损比较

Comparison of wear

1.5倍

Times

发生崩刃

Chipping

切削条件

Cutting

condition

公称直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M6×1

12mm

φ5.1

螺纹底孔深度

切削速度

进给速度

Drill Hole depth (Blind holes)

Cutting speed

Feed(Synchronized feed)

20mm（盲孔）

10m/min

530mm/min（同步进给）

切削油

使用设备

Cutting Fluid　Water-soluble(External coolant)

Machine Vertical Machining Center

水溶性（外部冷却）

立式M/C HSK63

转数

被削材

夹头

Rotation

Work Material

Holder

530min-1

S50C（180HB）

筒夹

Collet chuck

8

NSP

N螺旋丝锥

N 丝锥系列

N series

■By using high vanadium HSS, which is suitable for cutting screw threads, even flexibility screw threads can have long tool life

■Stable cutting screw threads by high rigidity design

■采用适合丝锥的加工特性的高钒高速钢，虽然是通用丝锥，也可实现长寿命

■采用高刚性设计，可实现稳定的螺纹加工

旧款产品

Old products

NSP

我司旧款A

Old products A

我司旧款B

Old products B

NSP

加工孔数

Cutting holes

Comparison of tool life

寿命比较

The breaking torsion torque

破坏扭矩

平均156孔Average

平均230孔Average

平均330孔Average

我司旧款B

Old products B

破坏扭矩

The breaking torsion torque

我司旧款A NSP

Old products A

強

破坏扭矩比通用产品高出20%，刚性大、不易折断，

可实现稳定的加工

The breaking torsion torque of NSP is 20% bigger than competitor

Rigidity of NSP is high and hardly breaks, so NSP is stable cutting screw threads

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

加工深度

使用机械

刀柄

切削油剂

Thread size

Work Material

Cutting speed

Depth of Cutting

Machine

Holder

Cutting Fluid

M12X1.75

S50C

10m/min

18mm（盲孔）

立形M/C

自动攻丝刀柄

水溶性切削油剂

Auto tapper

Water-soluble cutting fluid

Vertical M/C

STSP

螺旋槽丝锥

ST丝锥系列

ST series

■From materials to heat treatment and manufacturing, our SG tap, Hyper Z tap technology was inherited

■Optimized design for multipurpose usage

■从材料的热处理到制造，是现系列SG丝锥、

Hyper Z丝锥技术力量的继承

■重视通用性采用适合的形状设计 EHT

直槽丝锥

EXCEL 丝锥系列

EXCEL series

TAFLET 丝锥系列

TAFLET series

超硬丝锥适合铸铁、非铁金属及树脂等加工。 Carbide tap is the most suitable for cast iron, nonferrous metal and resin

TFL

TAFLET-L

■Taflet series cuts internal threads by forming the threads by a plastic flow of the work material

■Internal threads are cut by Taflet series has good points

■TAFLET系列通过被削材的塑性流动挤压出螺纹，形成内螺纹。

■使用TAFLET系列加工出来的内螺纹具备更好的特性。

切削条件

Cutting

condition

加工个数

The number

of cutting car part

以往品A

Other products A

以往品B

Other products B

以往品C

Other products C

EHT

Cutting example of car part

汽车零部件的切削案例

0

10,000

20,000

30,000

40,000

切削条件

Cutting

condition

加工个数

The number

of cutting car part

0

20,000

40,000

60,000

EHT

(VC30)

以往品HSS直槽丝锥HSS hand tap(VC7)

切削速度

进给速度

转数

Cutting speed

Feed

Rotation

7m/min

370mm/min

740min-1

Work Material

Cutting Fluid/Air blow

被削材

切削油剂

螺纹直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M3×0.5

6mm

φ2.6

FRP（含玻璃纤维）

气冷

切削速度

进给速度

转数

Cutting speed

Feed

Rotation

7m/min

370mm/min

370min-1

Work Material

Cutting Fluid/Air blow

被削材

切削油剂

ADC12

气冷

螺纹直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M6×1

15mm

φ5.1

挤压丝锥 Taflet

径向部分

Radial part

使用TAFLET

加工的内螺纹 缓降部分

Relief drop part

提高内螺纹强度！

纤维流线不会被切断

Higher thread strength!

Fiber flow is not cut

Internal threads are cut

by Taflet

Cutting tap

使用切削丝锥

加工的内螺纹

Internal threads are cut

by cutting tap

Cutting Fiber flow

切削丝锥

沟槽

Flute

钻腹

Web

刃背

Land

纤维流线被破坏

Item

项目

丝锥折断

切屑导致的故障

内螺纹的精度

内螺纹的表面粗糙度

攻丝扭矩

内螺纹的强度

被加工材

Breakage

Chips trouble

Precision of internal threads

Surface roughness of internal threads

Tapping torque

Strength of internal threads

Work material

TAFLET的特性Characteristic of Taflet

没有沟槽，不易折断。

不产生切屑，不会引起故障。

挤压加工，偏差小。

沿丝锥表面形成螺纹，螺纹表面状态好。

切削丝锥的1.5~2.5倍

塑性加工，纤维流线连续不断裂，强度好。

只限延展性较好的材料。

Hardly breaking because there is no flute

Free from troubles because no chips are produced

Dispersion is small because forming threads

Extremely good quality because of sliding on the tap face

1.5 to 2.5 times higher than the cutting tap

Strong because fiber flow is not being cut by plastic cutting

Limited to high-ductility materials

切削丝锥

Cutting tap

×

×

×

×

○

×

○

公称直径 M10×1.25

Thread size

TAFLET

Taflet

ADC12

145

切削丝锥

Cutting tap

ADC12

98

S10C

640

S10C

破损负荷（k 410 g f） Breaking load

内螺纹强度提高Strength of

internal threads up

強

TAFLET

Taflet

○

○

○

○

×

◎

×

0

200

400

600

加工孔数（个）

No. of thread holes

寿命比較

Compare machining life

430

STSP

280

我司旧款无表面处理通用丝锥other’s without surface treatment multipurpose tap

我司旧款无表面处理通用丝锥 STSP other’s without surface treatment multipurpose tap

280孔加工后

After 280 machining

磨损比较

Comparison of wear

1.5倍

Times

发生崩刃

Chipping

切削条件

Cutting

condition

公称直径

螺纹深度

螺纹底孔直径

Thread size

Thread depth

Drill Hole Dia.

M6×1

12mm

φ5.1

螺纹底孔深度

切削速度

进给速度

Drill Hole depth (Blind holes)

Cutting speed

Feed(Synchronized feed)

20mm（盲孔）

10m/min

530mm/min（同步进给）

切削油

使用设备

Cutting Fluid　Water-soluble(External coolant)

Machine Vertical Machining Center

水溶性（外部冷却）

立式M/C HSK63

转数

被削材

夹头

Rotation

Work Material

Holder

530min-1

S50C（180HB）

筒夹

Collet chuck

9

Types and selection of taps

丝锥的种类和选型

切削丝锥

挤压丝锥

Cut thread tap

Thread forming tap

丝锥的种类特 特征 用途 成形工艺Types of taps Characteristics Applications Forming process

螺尖丝锥（枪式丝锥）

直槽丝锥

TAFLET

■咬合性高，锋利度良好

■切屑从加工面上方排出，不残留在沟槽里

■呈线圈状连续排出

■请注意因切屑搅在一起导致的故障

■内螺纹有效直径容易扩大

■刀头强度低

■切屑压出方向与丝锥加工方向相同

■不会因切屑搅在一起而出现故障

■内螺纹精度稳定

■丝锥折断强度高

■可有效进行高速攻丝

■不能用于盲孔加工

■刃尖强度高，不易出现碎屑

■切屑容易被搅碎，排出性不好

■容易研磨

■切屑积累在沟槽内，容易出现堵塞

■不会产生切屑

■内螺纹精度稳定

■丝锥折断强度高

■可实现高速攻丝

■螺纹底孔管理较难

■不能研磨

■盲孔

■用于切屑呈线圈状排出的被削材

■通孔

■用于切屑呈线圈状排出的被削材

■盲孔、通孔

■用于切屑容易被搅碎的被削材及高硬度材

■盲孔、通孔

■用于延展性较好的被削材

内螺纹侧

咬合部

第3刀

3 7

第4刀

4

8

第1刀

1 5 9

第2刀

2 6 10

1

2

3

4

5

6

7

8

9

10

丝锥

第4螺纹槽、螺纹牙距2.5的示例

螺纹底孔

直径

螺旋丝锥

Point Tap (Gun Tap)

Hand Tap

Taflet

Spiral Tap

■Good bite and a fine edge

■Chips are ejected towards the work surface so are not left in groove

■Coils of chips are ejected continuously

■Be careful of coils of chips getting tangled and causing trouble

■Easy to enlarge nominal diameter of female thread

■Cutting edge strength is low

■Blind holes

■Work materials whose chips are ejected in coils

■Through holes

■Work materials whose chips are ejected in coils

■Blind holes/through holes

■Hard materials and materials whose chips break up easily

■Blind holes/through holes

■Material that has good malleability

■Chips are pushed out in the direction of the taps advancement

■Coils of chips do not get tangled and cause trouble

■Accuracy of female threads is consistent

■Taps have high breakage strength

■Effective for high-speed tapping

■Cannot be used for blind holes

■Chips are not ejected

■Accuracy of female threads is consistent

■Taps have high breakage strength

■High-speed tapping is possible

■Difficult to manage thread holes

■Regrinding is not possible

■Very strong cutting edge, hard to chip

■Easily breaks up chips, but ejectability is low

■Re-sharpening is easy

■Chips tend to get stuck in grooves

咬合部

1

2

3

丝锥

挤压部

螺纹底孔

直径

内螺纹侧

1 2

3

10

Types and selection of taps

丝锥的种类和选型

切削丝锥

挤压丝锥

Cut thread tap

Thread forming tap

丝锥的种类特 特征 用途 成形工艺Types of taps Characteristics Applications Forming process

螺尖丝锥（枪式丝锥）

直槽丝锥

TAFLET

■咬合性高，锋利度良好

■切屑从加工面上方排出，不残留在沟槽里

■呈线圈状连续排出

■请注意因切屑搅在一起导致的故障

■内螺纹有效直径容易扩大

■刀头强度低

■切屑压出方向与丝锥加工方向相同

■不会因切屑搅在一起而出现故障

■内螺纹精度稳定

■丝锥折断强度高

■可有效进行高速攻丝

■不能用于盲孔加工

■刃尖强度高，不易出现碎屑

■切屑容易被搅碎，排出性不好

■容易研磨

■切屑积累在沟槽内，容易出现堵塞

■不会产生切屑

■内螺纹精度稳定

■丝锥折断强度高

■可实现高速攻丝

■螺纹底孔管理较难

■不能研磨

■盲孔

■用于切屑呈线圈状排出的被削材

■通孔

■用于切屑呈线圈状排出的被削材

■盲孔、通孔

■用于切屑容易被搅碎的被削材及高硬度材

■盲孔、通孔

■用于延展性较好的被削材

内螺纹侧

咬合部

第3刀

3 7

第4刀

4

8

第1刀

1 5 9

第2刀

2 6 10

1

2

3

4

5

6

7

8

9

10

丝锥

第4螺纹槽、螺纹牙距2.5的示例

螺纹底孔

直径

螺旋丝锥

Point Tap (Gun Tap)

Hand Tap

Taflet

Spiral Tap

■Good bite and a fine edge

■Chips are ejected towards the work surface so are not left in groove

■Coils of chips are ejected continuously

■Be careful of coils of chips getting tangled and causing trouble

■Easy to enlarge nominal diameter of female thread

■Cutting edge strength is low

■Blind holes

■Work materials whose chips are ejected in coils

■Through holes

■Work materials whose chips are ejected in coils

■Blind holes/through holes

■Hard materials and materials whose chips break up easily

■Blind holes/through holes

■Material that has good malleability

■Chips are pushed out in the direction of the taps advancement

■Coils of chips do not get tangled and cause trouble

■Accuracy of female threads is consistent

■Taps have high breakage strength

■Effective for high-speed tapping

■Cannot be used for blind holes

■Chips are not ejected

■Accuracy of female threads is consistent

■Taps have high breakage strength

■High-speed tapping is possible

■Difficult to manage thread holes

■Regrinding is not possible

■Very strong cutting edge, hard to chip

■Easily breaks up chips, but ejectability is low

■Re-sharpening is easy

■Chips tend to get stuck in grooves

咬合部

1

2

3

丝锥

挤压部

螺纹底孔

直径

内螺纹侧

1 2

3

11

各类被削材选型基准表

Selection Chart according to work Material

0 1.4 6 12 24 36

◀ MIN　MAX ▶

系列

Series

商品编码Code

商品名Product Name

Page

刊载页数 尺寸范围

Stocked Size

Tool

母材

Material

Coating

表面处理

外观照片

Appearance

SG

系列

SG Series

SGSP SG 螺旋槽丝锥

SG Spiral Tap 16

M2 M24

FAX SG

SGSP-1.5P SG 短切刃螺旋槽丝锥

SG Spiral Tap Short Chamfer 18

M2 M24

FAX SG

SGSPL SG 长柄螺旋槽丝锥

SG Spiral Tap Long Shank 19

M3 M24

FAX SG

SGSP-T SG 旋槽丝锥 难削材、钛合金专用

SG Spiral Tap for difficult-to-cut material & Titanium Alloy 21

M3 M12

FAX SG

SGPO SG 螺尖丝锥

SG Point Tap 22

M1.4 M24

FAX SG

SGPOL SG 长柄螺尖丝锥

SG Point Tap Long Shank 24

M3 M24

FAX SG

Hyper Z

系列

Hyper Z

Series

ZSP Hyper Z 螺旋槽丝锥

Hyper Z Spiral Tap 26

M3 M24

HSS-E 特殊

Special

ZSPL Hyper Z 长柄螺旋槽丝锥

Hyper Z Spiral Tap Long Shank 28

M3 M24

HSS-E 特殊

Special

ZSP-SUS Hyper Z 螺旋槽丝锥 不锈钢用

Hyper Z Spiral Tap for Stainless Steel 30

M3 M24

HSS-E 特殊

Special

ZSP-LS Hyper Z 小螺旋角丝锥

Hyper Z Low Spiral Tap 31

M3 M12

FAX 特殊

Special

ZSP-T HyperZ合金用螺旋槽丝锥

Hyper Z Spiral Tap for Titanium Alloy

32

M2.5 M16

FAX 特殊

Special

ZSP-T-HL HyperZ合金航空航天用螺旋槽丝锥

Hyper Z Spiral Tap for Titanium Alloy for helisert 33

M2.5 M16

FAX 特殊

Special

ZPO Hyper Z 螺尖丝锥

Hyper Z Point Tap 34

M3 M24

HSS-E 特殊

Special

ZPOL Hyper Z 长柄螺尖丝锥

Hyper Z Point Tap Long Shank 36

M3 M24

HSS-E 特殊

Special

ZPO-SUS Hyper Z 螺尖丝锥 不锈钢用

Hyper Z Point Tap for Stainless Steel 38

M3 M24

HSS-E 特殊

Special

ST

系列

ST Series

STSP ST螺旋槽丝锥

ST Spiral Tap 39

M2 M24

HSS-E −

STPO ST螺尖丝锥

ST Point Tap 40

M2 M24

HSS-E −

N

系列

N Series

NSP N螺旋槽丝锥

N Spiral Tap 41

M2 M36

HSS-E −

NSPL N长柄螺旋槽丝锥

N Spiral Tap Long Shank 43

M3 M24

HSS-E −

NPO N螺尖丝锥

N Point Tap 44

M1.4 M36

HSS-E −

12

加工形状Hole Condition 被削材 Work Material

盲孔 Blind Hole 通孔 Through Hole

Structural

一般结构用钢

Steel

Low

低炭素钢

Carbon Steel

Medium

中炭素钢

Carbon Steel

High

高炭素钢

Carbon Steel

Alloy

合金钢

Steel

Hardened

高硬度钢

Steel

Stainless

不锈钢

Steel

Cast

铸铁

Iron

Ductile

球墨铸铁

Cast Iron

Aluminum

铝合金

Alloy

Copper

铜合金

Alloy

Titanium

钛合金

Alloy

＜ 2D ≧ 2D

Deep

深孔

Hole

＜ 2D ≧ 2D

Deep

深孔

Hole

SS400 S15C S40C S50C SCM

SCR

30 〜

40HRC SUS FC FCD Al,AC

ADC Cu Ti

◎ ○ − ○ ○ − ○ ○ ◎ ◎ ○ ○ ○ − ○ ○ ○ −

◎ ○ − ○ ○ − ○ ○ ◎ ◎ ○ ○ ○ − ○ ○ ○ −

○ ○ ◎ ○ ○ ○ ○ ○ ◎ ◎ ○ ○ ○ − ○ ○ ○ −

○ ○ − ○ ○ − − − − ○ ○ ○ − − − − − ◎

不适用

No Use ◎ ○ − ○ ○ ◎ ◎ ◎ ○ ◎ ○ ○ ○ ○ −

不适用

No Use ○ ○ ◎ ○ ○ ◎ ◎ ◎ ○ ○ ○ ○ ○ ○ −

◎ ○ − ○ ○ − ◎ ◎ ◎ ○ ○ − − − ○ ○ − −

○ ○ ◎ ○ ○ ○ ◎ ◎ ◎ ○ ○ − − − ○ ○ − −

◎ ○ − ○ ○ − ○ ○ ○ ○ − − ◎ − − ○ − −

◎ − − ○ − − − − − ○ − ◎ − ○ ○ − − −

◎ − − ○ − − − − − − − − − ○ ○ ○ ○ ◎

◎ − − ○ − − − − − − − − − ○ ○ ○ ○ ◎

不适用

No Use ◎ ○ − ◎ ◎ ◎ ○ ○ − − ○ ○ ○ − −

不适用

No Use ○ ○ ◎ ◎ ◎ ◎ ○ ○ − − ○ ○ ○ − −

不适用

No Use ◎ ○ − ○ ○ ○ ○ − − ◎ − − ○ − −

◎ ○ − ○ ○ − ○ ○ ◎ ○ ○ ○ − − − ○ ○ −

不适用

No Use ◎ ○ − ○ ○ ◎ ○ ○ ○ − − − ○ ○ −

◎ ○ − ○ ○ − ○ ○ ○ ○ ○ − − − ○ ○ ○ −

○ ○ ◎ ○ ○ ○ ○ ○ ○ ○ ○ − − − ○ ○ ○ −

不适用

No Use ◎ ○ − ○ ○ ○ ○ ○ − − − ○ ○ ○ −

　　　　　◎：优选Excellent　○：适用Good　−：不推荐Not recommended

13

0 1.4 6 12 24 36

◀ MIN　MAX ▶

系列

Series

商品编码Code

商品名Product Name

Page

刊载页数 尺寸范围

Stocked Size

Tool

母材

Material

Coating

表面处理

外观照片

Appearance

N

系列

N Series

NPOL N长柄螺尖丝锥

N Point Tap Long Shank 46

M3 M24

HSS-E −

EXCEL

系列 EXCEL Series

ESP EXCEL螺旋槽丝锥

EXCEL Spiral Tap 47

M4 M12

超硬 TICN

EHT EXCEL直槽丝锥

EXCEL Hand Tap 47

M3 M12

超硬 TICN

挤压丝锥

系列

TAFLET

Series

ZTF ZT挤压丝锥

ZT Forming Tap 48

M3 M16

HSS-Co ZT

TFS 挤压丝锥-S

TAFLET-S 49

M1.4 M6

HSS-E −

TFL 挤压丝锥-L

TAFLET-L 49

M1.4 M10

HSS-E −

TFLL 挤压丝锥-L 长柄

TAFLET-L Long Shank 50

M3 M10

HSS-E −

TFST 挤压丝锥 钢用

TAFLET for Steel 50

M1.4 M10

HSS-E −

TFSTL 挤压丝锥 钢用长柄

TAFLET Long Shank for Steel 51

M3 M10

HSS-E −

各类被削材选型基准表

Selection Chart according to work Material

14

加工形状Hole Condition 被削材 Work Material

盲孔 Blind Hole 通孔 Through Hole

Structural

一般结构用钢

Steel

Low

低炭素钢

Carbon Steel

Medium

中炭素钢

Carbon Steel

High

高炭素钢

Carbon Steel

Alloy

合金钢

Steel

Hardened

高硬度钢

Steel

Stainless

不锈钢

Steel

Cast

铸铁

Iron

Ductile

球墨铸铁

Cast Iron

Aluminum

铝合金

Alloy

Copper

铜合金

Alloy

Titanium

钛合金

Alloy

＜ 2D ≧ 2D

Deep

深孔

Hole

＜ 2D ≧ 2D

Deep

深孔

Hole

SS400 S15C S40C S50C SCM

SCR

30 〜

40HRC SUS FC FCD Al,AC

ADC Cu Ti

不适用

No Use ○ ○ ◎ ○ ○ ○ ○ ○ − − − ○ ○ ○ −

◎ ○ − ○ ○ − − − − − − − − ◎ ◎ ◎ ◎ −

○ ○ − ◎ ○ − − − − − − − − ◎ ◎ ◎ ◎ −

◎ ◎ − ◎ ◎ − ◎ ◎ ◎ ◎ ◎ ○ ○ − − ◎ − −

◎ ○ − ◎ ○ − − − − 不适用

No Use ◎ ○ −

◎ ◎ − ◎ ○ − − − − 不适用

No Use ◎ ○ −

○ ○ ◎ ○ ○ ◎ − − − 不适用

No Use ◎ ○ −

◎ ○ − ◎ ○ − ◎ ◎ ◎ ○ ○ − ○ − − − − −

○ ○ ◎ ○ ○ ◎ ◎ ◎ ◎ ○ ○ − ○ − − − − −

　　　　　◎：优选Excellent　○：适用Good　−：不推荐Not recommended

15

LIST 7946 单位(Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

2M0.4R M2 × 0.4 REG P1.5 2.5 40 8.0 3 3.0 15.0 2.1＊ 1 ● 2M0.4ZR 2

2M0.25R M2 × 0.25 REG P1 2.5 40 8.0 3 3.0 15.0 2.1＊ 1 ● 2M0.25ZR 2

2.2M0.45R M2.2 × 0.45 REG P2 2.5 42 9.5 3 3.0 15.0 2.3＊ 1 ● 2.2M0.45ZR 2

2.2M0.25R M2.2 × 0.25 REG P1 2.5 42 9.5 3 3.0 15.0 2.3＊ 1 ● 2.2M0.25ZR 2

2.3M0.4R M2.3 × 0.4 REG P1.5 2.5 42 9.5 3 3.0 15.0 2.4＊ 1 ● 2.3M0.4ZR 2

2.5M0.45R M2.5 × 0.45 REG P2 2.5 44 9.5 3 3.0 16.0 2.6＊ 1 ● 2.5M0.45ZR 2

2.5M0.35R M2.5 × 0.35 REG P1.5 2.5 44 9.5 3 3.0 16.0 2.6＊ 1 ● 2.5M0.35ZR 2

2.6M0.45R M2.6 × 0.45 REG P2 2.5 44 9.5 3 3.0 16.0 2.7＊ 1 ● 2.6M0.45ZR 2

3M0.5R

M3 × 0.5

REG P2

2.5 46 3.5 3 4.0 18.0 2.35 3 ● 3M0.5R+1 REG+1 P3

3M0.5R+2 REG+2 P4

3M0.5ZR REG P2 4

3M0.35R

M3 × 0.35

REG P2

2.5 46 3.5 3 4.0 18.0 2.55 3 3M0.35R+1 REG+1 P3 ●

3M0.35ZR REG P2 4

3.5M0.6R M3.5 × 0.6 REG P2 2.5 48 4.2 3 4.0 18.0 2.75 3 ●

3.5M0.35R M3.5 × 0.35 REG P2 2.5 48 4.2 3 4.0 18.0 2.95 3 ●

4M0.7R

M4 × 0.7

REG P3

2.5 52 4.9 3 5.0 20.0 3.15 3 ● 4M0.7R+1 REG+1 P4

4M0.7R+2 REG+2 P5

4M0.7ZR REG P3 4

4M0.5R

M4 × 0.5

REG P2

2.5 52 4.9 3 5.0 20.0 3.35 3 4M0.5R+1 REG+1 P3 ●

4M0.5ZR REG P2 4

4.5M0.75R M4.5 × 0.75 REG P2 2.5 55 5.3 3 5.0 20.0 3.55 3 ●

4.5M0.5R M4.5 × 0.5 REG P2 2.5 55 5.3 3 5.0 20.0 3.85 3 ●

5M0.8R

M5 × 0.8

REG P3

2.5 60 5.6 3 5.5 22.0 4.05 3 ● 5M0.8R+1 REG+1 P4

5M0.8R+2 REG+2 P5

5M0.8ZR REG P3 4

5M0.5R

M5 × 0.5

REG P2

2.5 60 5.6 3 5.5 22.0 4.35 3 5M0.5R+1 REG+1 P3 ●

5M0.5ZR REG P2 4

5.5M0.5R M5.5 × 0.5 REG P2 2.5 60 6.3 3 5.5 23.0 4.85 3 ●

6M1R

M6 × 1

REG P3

2.5 62 7.0 3 6.0 24.0 4.75 3 ● 6M1R+1 REG+1 P4

6M1R+2 REG+2 P5

6M1ZR REG P3 4

6M0.75R

M6 × 0.75

REG P2

2.5 62 7.0 3 6.0 24.0 5.05 3 6M0.75R+1 REG+1 P3 ●

6M0.75ZR REG P2 4

6M0.5R

M6 × 0.5

REG P2

2.5 62 7.0 3 6.0 24.0 5.35 3 6M0.5R+1 REG+1 P3 ●

6M0.5ZR REG P2 4

7M1R M7 × 1 REG P3 2.5 65 7.0 3 6.2 26.0 5.75 5 ●

7M0.75R M7 × 0.75 REG P2 2.5 65 7.0 3 6.2 26.0 6.05 5 ●

8M1.25R

M8 × 1.25

REG P3

8M1.25R+1 REG+1 P4 2.5 70 8.8 3 6.2 29.8 6.55 6 ●

8M1.25R+2 REG+2 P5

8M1R M8 × 1 REG P3 2.5 70 8.8 3 6.2 29.8 6.75 6 ● 8M1R+1 REG+1 P4

8M0.75R M8 × 0.75 REG P3 2.5 70 8.8 3 6.2 29.8 7.05 6 ● 8M0.75R+1 REG+1 P4

M6 以下有带凸顶尖和不带凸顶尖（平头型）2 种。不带凸顶尖（平头型）时编号 R 的前面带有“Z”。

Taps of M6 or less have 2 types, which are external center and Flat type.

In the case of Flat type (no external center), the code No. has \"Z\" in front of \"R\".

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size ＜ Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage. DN

L2

TCL

DCONMS

L1

DRVL DRVS

切削丝锥 THL

5 6

规格1 2

3 4

SGSP

SG Spiral Tap

SGSP

SG 螺旋槽丝锥

可用于多种被削材、加工机械，在多种切削条件下发挥出色性能。

Superior performance can exert on cutting various materials, machines,

and wide range of cutting condition.

订货方式 编码

FAX 45

16

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

9M1.25R M9 × 1.25 REG P3 2.5 72 8.8 3 7.0 29.8 7.55 6 ●

9M1R M9 × 1 REG P3 2.5 72 8.8 3 7.0 29.8 7.75 6 ●

9M0.75R M9 × 0.75 REG P3 2.5 72 8.8 3 7.0 29.8 8.05 6 ●

10M1.5R

M10 × 1.5

REG P3

10M1.5R+1 REG+1 P4 2.5 75 10.5 3 7.0 31.4 8.25 6 ●

10M1.5R+2 REG+2 P5

10M1.25R M10 × 1.25 REG P3 2.5 75 10.5 3 7.0 31.4 8.55 6 ● 10M1.25R+1 REG+1 P4

10M1R M10 × 1 REG P3 2.5 75 10.5 3 7.0 31.4 8.75 6 ● 10M1R+1 REG+1 P4

10M0.75R M10 × 0.75 REG P3 2.5 75 10.5 3 7.0 31.4 9.05 6 ● 10M0.75R+1 REG+1 P4

11M1.5R M11 × 1.5 REG P3 2.5 80 10.5 3 8.0 31.4 9.25 6 ●

11M1R M11 × 1 REG P3 2.5 80 10.5 3 8.0 31.4 9.75 6 ●

11M0.75R M11 × 0.75 REG P3 2.5 80 10.5 3 8.0 31.4 10.05 6 ●

12M1.75R

M12 × 1.75

REG P4

12M1.75R+1 REG+1 P5 2.5 82 12.3 3 8.5 36.2 9.95 6 ●

12M1.75R+2 REG+2 P6

12M1.5R M12 × 1.5 REG P3 2.5 82 12.3 3 8.5 36.2 10.25 6 ● 12M1.5R+1 REG+1 P4

12M1.25R M12 × 1.25 REG P3 2.5 82 12.3 3 8.5 36.2 10.55 6 ● 12M1.25R+1 REG+1 P4

12M1R M12 × 1 REG P3 2.5 82 12.3 3 8.5 36.2 10.75 6 ● 12M1R+1 REG+1 P4

14M2R M14 × 2 REG P4 2.5 88 14.0 3 10.5 42.4 11.65 6 ●

14M1.5R M14 × 1.5 REG P3 2.5 88 14.0 3 10.5 42.4 12.25 6 ●

14M1.25R M14 × 1.25 REG P3 2.5 88 14.0 3 10.5 42.4 12.55 6 ●

14M1R M14 × 1 REG P3 2.5 88 14.0 3 10.5 42.4 12.75 6 ●

15M1.5R M15 × 1.5 REG P3 2.5 90 10.5 3 10.5 42.4 13.25 6 ●

15M1R M15 × 1 REG P3 2.5 90 10.5 3 10.5 42.4 13.75 6 ●

16M2R M16 × 2 REG P4 2.5 95 14.0 3 12.5 44.4 13.65 6 ●

16M1.5R M16 × 1.5 REG P3 2.5 95 14.0 3 12.5 44.4 14.25 6 ●

16M1R M16 × 1 REG P3 2.5 95 14.0 3 12.5 44.4 14.75 6 ●

17M1.5R M17 × 1.5 REG P3 2.5 95 10.5 3 13.0 44.4 15.25 6 ●

17M1R M17 × 1 REG P3 2.5 95 10.5 3 13.0 44.4 15.75 6 ●

18M2.5R M18 × 2.5 REG P5 2.5 100 17.5 3 14.0 49.2 15.15 6 ●

18M2R M18 × 2 REG P4 2.5 100 17.5 3 14.0 49.2 15.65 6 ●

18M1.5R M18 × 1.5 REG P4 2.5 100 17.5 3 14.0 49.2 16.25 6 ●

18M1R M18 × 1 REG P3 2.5 100 17.5 3 14.0 49.2 16.75 6 ●

20M2.5R M20 × 2.5 REG P5 2.5 105 17.5 4 15.0 50.7 17.15 6 ●

20M2R M20 × 2 REG P4 2.5 105 17.5 4 15.0 50.7 17.65 6 ●

20M1.5R M20 × 1.5 REG P4 2.5 105 17.5 4 15.0 50.7 18.25 6 ●

20M1R M20 × 1 REG P3 2.5 105 17.5 4 15.0 50.7 18.75 6 ●

22M2.5R M22 × 2.5 REG P5 2.5 115 17.5 4 17.0 54.0 19.15 6 ●

22M2R M22 × 2 REG P4 2.5 115 17.5 4 17.0 54.0 19.65 6 ●

22M1.5R M22 × 1.5 REG P4 2.5 115 17.5 4 17.0 54.0 20.25 6 ●

22M1R M22 × 1 REG P3 2.5 115 17.5 4 17.0 54.0 20.75 6 ●

24M3R M24 × 3 REG P5 2.5 120 21.0 4 19.0 59.0 20.65 6 ●

24M2R M24 × 2 REG P4 2.5 120 21.0 4 19.0 59.0 21.65 6 ●

24M1.5R M24 × 1.5 REG P4 2.5 120 21.0 4 19.0 59.0 22.25 6 ●

24M1R M24 × 1 REG P3 2.5 120 21.0 4 19.0 59.0 22.75 6 ●

单位(Unit)：㎜

SGSP

SG 螺旋槽丝锥

17

LIST 7954 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

2M0.4R M2 × 0.4 REG P1.5 1.5 40 8.0 3 3.0 15.0 2.1＊ 1 ●

3M0.5R M3 × 0.5 REG P2 1.5 46 3.5 3 4.0 18.0 2.35 2 ●

3.5M0.6R M3.5 × 0.6 REG P2 1.5 48 4.2 3 4.0 18.0 2.75 2 ●

4M0.7R M4 × 0.7 REG P3 1.5 52 4.9 3 5.0 20.0 3.15 2 ●

5M0.8R M5 × 0.8 REG P3 1.5 60 5.6 3 5.5 22.0 4.05 2 ●

6M1R M6 × 1 REG P3 1.5 62 7.0 3 6.0 24.0 4.75 2 ●

8M1.25R M8 × 1.25 REG P3 1.5 70 8.8 3 6.2 29.8 6.55 3 ●

8M1R M8 × 1 REG P3 1.5 70 8.8 3 6.2 29.8 6.75 3 ●

10M1.5R M10 × 1.5 REG P3 1.5 75 10.5 3 7.0 31.4 8.25 3 ●

10M1.25R M10 × 1.25 REG P3 1.5 75 10.5 3 7.0 31.4 8.55 3 ●

10M1R M10 × 1 REG P3 1.5 75 10.5 3 7.0 31.4 8.75 3 ●

12M1.75R M12 × 1.75 REG P4 1.5 82 12.3 3 8.5 36.2 9.95 3 ●

12M1.5R M12 × 1.5 REG P3 1.5 82 12.3 3 8.5 36.2 10.25 3 ●

12M1.25R M12 × 1.25 REG P3 1.5 82 12.3 3 8.5 36.2 10.55 3 ●

14M2R M14 × 2 REG P4 1.5 88 14.0 3 10.5 42.4 11.65 3 ●

14M1.5R M14 × 1.5 REG P3 1.5 88 14.0 3 10.5 42.4 12.25 3 ●

16M2R M16 × 2 REG P4 1.5 95 14.0 3 12.5 44.4 13.65 3 ●

16M1.5R M16 × 1.5 REG P3 1.5 95 14.0 3 12.5 44.4 14.25 3 ●

18M2.5R M18 × 2.5 REG P5 1.5 100 17.5 3 14.0 49.2 15.15 3 ●

18M1.5R M18 × 1.5 REG P4 1.5 100 17.5 3 14.0 49.2 16.25 3 ●

20M2.5R M20 × 2.5 REG P5 1.5 105 17.5 4 15.0 50.7 17.15 3 ●

20M1.5R M20 × 1.5 REG P4 1.5 105 17.5 4 15.0 50.7 18.25 3 ●

22M2.5R M22 × 2.5 REG P5 1.5 115 17.5 4 17.0 54.0 19.15 3 ●

22M1.5R M22 × 1.5 REG P4 1.5 115 17.5 4 17.0 54.0 20.25 3 ●

24M3R M24 × 3 REG P5 1.5 120 21.0 4 19.0 59.0 20.65 3 ●

24M1.5R M24 × 1.5 REG P4 1.5 120 21.0 4 19.0 59.0 22.25 3 ●

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size ＜ Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage. DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

3

切削丝锥

SGSP-1.5P

SG Spiral Tap Short Chamfer

SGSP

SG 短切刃螺旋槽丝锥

刀具几何形状的优化方案，实现长寿命

Optimization shape of chamfer can make tool life longer

编码 × 1.5P

工具材料 涂 层 螺旋角

订货方式

FAX 45

18

LIST 7948 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

3M0.5R

100 M3×0.5

REG P2

3M0.5R+1 REG+1 P3 2.5 5.8 3 4.0 13.0 1 ●

3M0.5R+2 REG+2 P4

3M0.35R 100 M3×0.35 REG P2 2.5 4.9 3 4.0 13.0 1 ● 3M0.35R+1 REG+1 P3

3.5M0.6R 100 M3.5×0.6 REG P2 2.5 6.5 3 4.0 15.0 1 ●

3.5M0.35R 100 M3.5×0.35 REG P2 2.5 4.9 3 4.0 15.0 1 ●

4M0.7R

100 M4×0.7

REG P3

4M0.7R+1 REG+1 P4 2.5 7.8 3 5.0 17.0 1 ●

4M0.7R+2 REG+2 P5

4M0.5R 100 M4×0.5 REG P2 2.5 5.8 3 5.0 17.0 1 ● 4M0.5R+1 REG+1 P3

4.5M0.75R 100 M4.5×0.75 REG P2 2.5 8.6 3 5.0 19.0 1 ●

4.5M0.5R 100 M4.5×0.5 REG P2 2.5 5.8 3 5.0 19.0 1 ●

5M0.8R

100 M5×0.8

REG P3

5M0.8R+1 REG+1 P4 2.5 9.5 3 5.5 21.0 1 ●

5M0.8R+2 REG+2 P5

5M0.5R 100 M5×0.5 REG P2 2.5 5.8 3 5.5 21.0 1 ● 5M0.5R+1 REG+1 P3

5.5M0.5R 100 M5.5×0.5 REG P2 2.5 5.8 3 5.5 23.0 1 ●

6M1R 100

M6×1

REG P3

2.5 11.5 3 6.0 25.0 1 ●

6M1R 150

6M1R+1 100 REG+1 P4 6M1R+1 150

6M1R+2 100 REG+2 P5 6M1R+2 150

6M0.75R 100

M6×0.75

REG P2

2.5 9.0 3 6.0 25.0 1 ● 6M0.75R 150

6M0.75R+1 100 REG+1 P3 6M0.75R+1 150

7M1R 100 M7×1 REG P3 2.5 11.5 3 6.2 25.3 2 ● 7M1R 150

7M0.75R 100 M7×0.75 REG P2 2.5 9.0 3 6.2 25.3 2 ● 7M0.75R 150

8M1.25R 100

M8×1.25

REG P3

2.5 15.1 3 6.2 28.0 3 ●

8M1.25R 150

8M1.25R+1 100 REG+1 P4 8M1.25R+1 150

8M1.25R+2 100 REG+2 P5 8M1.25R+2 150

8M1R 100

M8×1

REG P3

2.5 11.5 3 6.2 28.0 3 ● 8M1R 150

8M1R+1 100 REG+1 P4 8M1R+1 150

8M0.75R 100

M8×0.75

REG P3

2.5 9.0 3 6.2 28.0 3 ● 8M0.75R 150

8M0.75R+1 100 REG+1 P4 8M0.75R+1 150

9M1.25R 100 M9×1.25 REG P3 2.5 15.1 3 7.0 28.6 3 ● 9M1.25R 150

9M1R 100 M9×1 REG P3 2.5 11.5 3 7.0 28.6 3 ● 9M1R 150

9M0.75R 100 M9×0.75 REG P3 2.5 9.0 3 7.0 28.6 3 ● 9M0.75R 150

L2

TCL

DCONMS

L1

DRVL DRVS

切削丝锥 THL

规格1 2

3

SGSPL

SG Spiral Tap Long Shank

SGSPL

SG 长柄螺旋槽丝锥

当标准尺寸丝锥长度不够时，请使用本丝锥。

This tap is used when a standard SG Spiral Tap is too short.

编码 × 全长

工具材料 涂 层 螺旋角

订货方式

FAX 45

19

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

10M1.5R 100

M10×1.5

REG P3

2.5 18.8

3 7.0 31.9

3

●

10M1.5R 150

10M1.5R+1 100 REG+1 P4 10M1.5R+1 150

10M1.5R+2 100 REG+2 P5 10M1.5R+2 150

10M1.25R 100

M10×1.25

REG P3

2.5 15.1

3 7.0 31.9

3

● 10M1.25R 150

10M1.25R+1 100 REG+1 P4 10M1.25R+1 150

10M1R 100

M10×1

REG P3

2.5 11.5

3 7.0 31.9

3

● 10M1R 150

10M1R+1 100 REG+1 P4 10M1R+1 150

10M0.75R 100

M10×0.75

REG P3

2.5 9.0

3 7.0 31.9

3

● 10M0.75R 150

10M0.75R+1 100 REG+1 P4 10M0.75R+1 150

11M1.5R 100 M11×1.5 REG P3 2.5 18.8

3 8.0 32.9

3

● 11M1.5R 150

11M1R 100 M11×1 REG P3 2.5 11.5

3 8.0 32.9

3

● 11M1R 150

12M1.75R 100

M12×1.75

REG P4

2.5 22.4

3 8.5 35.2

3

●

12M1.75R 150

12M1.75R+1 100 REG+1 P5 12M1.75R+1 150

12M1.75R+2 100 REG+2 P6 12M1.75R+2 150

12M1.5R 100

M12×1.5

REG P3

2.5 19.8

3 8.5 35.2

3

● 12M1.5R 150

12M1.5R+1 100 REG+1 P4 12M1.5R+1 150

12M1.25R 100

M12×1.25

REG P3

2.5 16.1

3 8.5 35.2

3

● 12M1.25R 150

12M1.25R+1 100 REG+1 P4 12M1.25R+1 150

12M1R 100

M12×1

REG P3

2.5 13.5

3 8.5 35.2

3

● 12M1R 150

12M1R+1 100 REG+1 P4 12M1R+1 150

14M2R 150 M14×2 REG P4 2.5 26.0

3 10.5 44.9

3

●

14M1.5R 150 M14×1.5 REG P3 2.5 19.8

3 10.5 44.9

3

●

14M1.25R 150 M14×1.25 REG P3 2.5 16.1

3 10.5 44.9

3

●

14M1R 150 M14×1 REG P3 2.5 13.5

3 10.5 44.9

3

●

15M1.5R 150 M15×1.5 REG P3 2.5 19.8

3 10.5 48.2

3

●

15M1R 150 M15×1 REG P3 2.5 13.5

3 10.5 48.2

3

●

16M2R 150 M16×2 REG P4 2.5 26.0

3 12.5 47.4

3

● 16M2R 200

16M1.5R 150 M16×1.5 REG P3 2.5 19.8

3 12.5 47.4

3

●

16M1R 150 M16×1 REG P3 2.5 13.5

3 12.5 47.4

3

●

17M1.5R 150 M17×1.5 REG P3 2.5 19.8

3 13.0 50.4

3

●

17M1R 150 M17×1 REG P3 2.5 13.5

3 13.0 50.4

3

●

18M2.5R 150 M18×2.5 REG P5 2.5 32.5

3 14.0 48.7

3

●

18M2R 150 M18×2 REG P4 2.5 29.0

3 14.0 48.7

3

●

18M1.5R 150 M18×1.5 REG P4 2.5 19.8

3 14.0 48.7

3

●

18M1R 150 M18×1 REG P3 2.5 13.5

3 14.0 48.7

3

●

20M2.5R 150 M20×2.5 REG P5 2.5 32.5

4 15.0 53.7

3

● 20M2.5R 200

20M2R 150 M20×2 REG P4 2.5 29.0

4 15.0 53.7

3

●

20M1.5R 150 M20×1.5 REG P4 2.5 19.8

4 15.0 53.7

3

●

20M1R 150 M20×1 REG P3 2.5 13.5

4 15.0 53.7

3

●

22M2.5R 150 M22×2.5 REG P5 2.5 32.5

4 17.0 54.0

3

●

22M2R 150 M22×2 REG P4 2.5 29.0

4 17.0 54.0

3

●

22M1.5R 150 M22×1.5 REG P4 2.5 19.8

4 17.0 54.0

3

●

22M1R 150 M22×1 REG P3 2.5 13.5

4 17.0 54.0

3

●

24M3R 150 M24×3 REG P5 2.5 39.0

4 19.0 59.0

3

● 24M3R 200

24M2R 150 M24×2 REG P4 2.5 30.0

4 19.0 59.0

3

●

24M1.5R 150 M24×1.5 REG P4 2.5 22.8

4 19.0 59.0

3

●

24M1R 150 M24×1 REG P3 2.5 14.5

4 19.0 59.0

3

●

SGSPL

SG 长柄螺旋槽丝锥

20

LIST 7958 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R M3 × 0.5 REG P3 2.5 46 5.6 3 4.0 20.0 2.35 1 ●

3M0.35R M3 × 0.35 REG P2 2.5 46 4.4 3 4.0 20.0 2.55 1 ●

4M0.7R M4 × 0.7 REG P3 2.5 52 8.1 3 5.0 22.5 3.15 1 ●

4M0.5R M4 × 0.5 REG P3 2.5 52 6.1 3 5.0 22.5 3.35 1 ●

5M0.8R M5 × 0.8 REG P3 2.5 60 9.4 3 5.5 26.0 4.05 1 ●

5M0.5R M5 × 0.5 REG P3 2.5 60 6.1 3 5.5 26.0 4.35 1 ●

6M1R M6 × 1 REG P3 2.5 62 12.0 3 6.0 29.0 4.75 1 ●

6M0.75R M6 × 0.75 REG P3 2.5 62 9.2 3 6.0 29.0 5.05 1 ●

6M0.5R M6 × 0.5 REG P3 2.5 62 6.1 3 6.0 29.0 5.35 1 ●

8M1.25R M8 × 1.25 REG P3 2.5 70 15.4 3 6.2 33.0 6.55 2 ●

8M1R M8 × 1 REG P3 2.5 70 12.4 3 6.2 27.0 6.75 2 ●

8M0.75R M8 × 0.75 REG P3 2.5 70 9.2 3 6.2 24.5 7.05 2 ●

10M1.5R M10 × 1.5 REG P3 2.5 75 18.9 3 7.0 36.5 8.25 2 ●

10M1.25R M10 × 1.25 REG P3 2.5 75 15.7 3 7.0 33.0 8.55 2 ●

10M1R M10 × 1 REG P3 2.5 75 12.4 3 7.0 27.0 8.75 2 ●

10M0.75R M10 × 0.75 REG P3 2.5 75 9.2 3 7.0 24.5 9.05 2 ●

12M1.75R M12 × 1.75 REG P4 2.5 82 22.4 3 8.5 41.5 9.95 2 ●

12M1.5R M12 × 1.5 REG P3 2.5 82 20.9 3 8.5 40.0 10.25 2 ●

12M1.25R M12 × 1.25 REG P3 2.5 82 17.2 3 8.5 34.5 10.55 2 ●

12M1R M12 × 1 REG P3 2.5 82 13.5 3 8.5 32.5 10.75 2 ●

・加工钛合金时推荐的切削速度为 5 ～ 7m/min。　Recommended cutting speed is 5 ～ 7m/min for Titanium Alloy.

50

100

150

200

SGSP-T

150

161

fi损

62

ffffl锥

ffifl

50

钛专

丝锥

Spiral Tap

for Titanium Alloy



Cutting

holes

0

Comparison of cutting for Titanium Alloy

钛合金的加工比较

ffffl

Cutting

condition

螺纹尺寸

被削材

螺纹深度

切削速度

Thread size

Work Material

Thread depth

Cutting speed

M3×0.5

Ti-6Al-4V

6mm

5m/min

转速

切削油剂

使用机械

Rotation

Cutting Fluid/Water-soluble

Machine/Vertical Machining Center

530min-1

M/C

切削条件

Cutting

condition

螺纹尺寸

被削材

螺纹深度

Thread size

Work Material

Thread depth

M6×1

Ti-6Al-4V

12mm

切削速度

转速

切削油剂

Cutting speed

Rotation

Cutting Fluid/Water-soluble

5m/min

265min-1

使用机械

Machine/Vertical Machining Center

M/C

Stable tapping without biting of cutting chips

-T

S G 螺 旋 槽 丝 锥 难 削 材 、钛 合 金 专 用

铁屑分断优良、稳定加工

3长

N Thrust

扭Ncm Torque

SGSP-T

1500

1000

500

0

-500

-1500

-1000

300

200

100

0

-100

-300

-200

2 4 6

时间S Time

8 10

N Thrust

扭Ncm Torque

普通钢用螺旋槽丝锥

Spiral Tap for Steel

1500

1000

500

0

-500

-1500

-1000

300

200

100

0

-100

-300

-200

2 4 6

时间S Time

8 10

DN

L2

TCL

DCONMS

L1

DRVL DRVS

切削丝锥 THL

规格1 2

SGSP-T

SG Spiral Tap for difficult-to-cut material & Titanium Alloy

SGSP-T

SG 螺旋丝锥 难削材、钛合金专用

难削材、钛合金的盲孔用丝锥。防止切屑的凝结及嵌入，可实现长寿命、稳定的加工。

Excellent taps for blind holes on difficult-to-cut material & Titanium Alloy. Long tool life and stable tapping by less chip welding and jamming.

订货方式 编码

工具材料 涂 层 螺旋角

FAX 10o

21

LIST 7950 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

1.4M0.3R M1.4 × 0.3 REG P1 5 34 7.0 2 3.0 11 1.5＊ 1 ●

1.6M0.35R M1.6 × 0.35 REG P1.5 5 36 8.0 2 3.0 13 1.7＊ 1 ●

1.7M0.35R M1.7 × 0.35 REG P1.5 5 36 8.0 2 3.0 13 1.8＊ 1 ●

2M0.4R M2 × 0.4 REG P1.5 5 40 8.0 2 3.0 15 2.1＊ 1 ●

2M0.25R M2 × 0.25 REG P1 5 40 8.0 2 3.0 15 2.1＊ 1 ●

2.2M0.45R M2.2 × 0.45 REG P2 5 42 9.5 2 3.0 15 2.3＊ 1 ●

2.2M0.25R M2.2 × 0.25 REG P1 5 42 9.5 2 3.0 15 2.3＊ 1 ●

2.3M0.4R M2.3 × 0.4 REG P1.5 5 42 9.5 2 3.0 15 2.4＊ 1 ●

2.5M0.45R M2.5 × 0.45 REG P2 5 44 9.5 2 3.0 16 2.6＊ 1 ●

2.5M0.35R M2.5 × 0.35 REG P2 5 44 9.5 2 3.0 16 2.6＊ 1 ●

2.6M0.45R M2.6 × 0.45 REG P2 5 44 9.5 2 3.0 16 2.7＊ 1 ●

3M0.5R

M3 × 0.5

REG P3

3M0.5R+1 REG+1 P4 5 46 11.0 3 4.0 18 2.3 2 ●

3M0.5R+2 REG+2 P5

3M0.35R M3 × 0.35 REG P2 5 46 11.0 3 4.0 18 2.3 2 ● 3M0.35R+1 REG+1 P3

3.5M0.6R M3.5 × 0.6 REG P2 5 48 13.0 3 4.0 19 2.8 2 ●

3.5M0.35R M3.5 × 0.35 REG P2 5 48 13.0 3 4.0 19 2.8 2 ●

4M0.7R

M4 × 0.7

REG P3

4M0.7R+1 REG+1 P4 5 52 13.0 3 5.0 21 3.1 2 ●

4M0.7R+2 REG+2 P5

4M0.5R M4 × 0.5 REG P3 5 52 13.0 3 5.0 21 3.1 2 ● 4M0.5R+1 REG+1 P4

4.5M0.75R M4.5 × 0.75 REG P3 5 55 13.0 3 5.0 21 3.5 2 ●

4.5M0.5R M4.5 × 0.5 REG P3 5 55 13.0 3 5.0 21 3.5 2 ●

5M0.8R

M5 × 0.8

REG P3

5M0.8R+1 REG+1 P4 5 60 16.0 3 5.5 25 3.9 2 ●

5M0.8R+2 REG+2 P5

5M0.5R M5 × 0.5 REG P3 5 60 16.0 3 5.5 25 3.9 2 ● 5M0.5R+1 REG+1 P4

5.5M0.5R M5.5 × 0.5 REG P3 5 60 16.0 3 5.5 25 4.4 2 ●

6M1R

M6 × 1

REG P3

6M1R+1 REG+1 P4 5 62 19.0 3 6.0 30 4.7 2 ●

6M1R+2 REG+2 P5

6M0.75R M6 × 0.75 REG P3 5 62 19.0 3 6.0 30 4.7 2 ● 6M0.75R+1 REG+1 P4

6M0.5R M6 × 0.5 REG P3 5 62 19.0 3 6.0 30 4.7 2 ● 6M0.5R+1 REG+1 P4

7M1R M7 × 1 REG P3 5 65 19.0 3 6.2 － － 3 ●

7M0.75R M7 × 0.75 REG P3 5 65 19.0 3 6.2 － － 3 ●

8M1.25R

M8 × 1.25

REG P3

8M1.25R+1 REG+1 P4 5 70 22.0 3 6.2 － － 3 ●

8M1.25R+2 REG+2 P5

8M1R M8 × 1 REG P3 5 70 22.0 3 6.2 － － 3 ● 8M1R+1 REG+1 P4

8M0.75R M8 × 0.75 REG P3 5 70 22.0 3 6.2 － － 3 ● 8M0.75R+1 REG+1 P4

9M1.25R M9 × 1.25 REG P3 5 72 22.0 3 7.0 － － 3 ●

9M1R M9 × 1 REG P3 5 72 22.0 3 7.0 － － 3 ●

9M0.75R M9 × 0.75 REG P3 5 72 22.0 3 7.0 － － 3 ●

10M1.5R

M10 × 1.5

REG P4

10M1.5R+1 REG+1 P5 5 75 24.0 3 7.0 － － 3 ●

10M1.5R+2 REG+2 P6

10M1.25R M10 × 1.25 REG P3 5 75 24.0 3 7.0 － － 3 ● 10M1.25R+1 REG+1 P4

10M1R M10 × 1 REG P3 5 75 24.0 3 7.0 － － 3 ● 10M1R+1 REG+1 P4

10M0.75R M10 × 0.75 REG P3 5 75 24.0 3 7.0 － － 3 ● 10M0.75R+1 REG+1 P4

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size ＜ Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage.

切削丝锥

DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

3

SGPO

SG Point Tap

SGPO

SG 螺尖丝锥

可满足多种切削速度、加工机械、被削材要求的通孔用丝锥。

This tap is used for through holes and corresponding to tapping speed, machines, work materials.

订货方式 编码

工具材料 涂 层

FAX

22

SGPO

SG 螺尖丝锥

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

11M1.5R M11 × 1.5 REG P4 5 80 25.0 3 8.0 － － 3 ●

11M1R M11 × 1 REG P3 5 80 25.0 3 8.0 － － 3 ●

11M0.75R M11 × 0.75 REG P3 5 80 25.0 3 8.0 － － 3 ●

12M1.75R

M12 × 1.75

REG P4

12M1.75R+1 REG+1 P5 5 82 29.0 3 8.5 － － 3 ●

12M1.75R+2 REG+2 P6

12M1.5R M12 × 1.5 REG P4 5 82 29.0 3 8.5 － － 3 ● 12M1.5R+1 REG+1 P5

12M1.25R M12 × 1.25 REG P4 5 82 29.0 3 8.5 － － 3 ● 12M1.25R+1 REG+1 P5

12M1R M12 × 1 REG P3 5 82 29.0 3 8.5 － － 3 ● 12M1R+1 REG+1 P4

14M2R M14 × 2 REG P4 5 88 30.0 3 10.5 － － 3 ●

14M1.5R M14 × 1.5 REG P4 5 88 30.0 3 10.5 － － 3 ●

14M1.25R M14 × 1.25 REG P4 5 88 30.0 3 10.5 － － 3 ●

14M1R M14 × 1 REG P3 5 88 30.0 3 10.5 － － 3 ●

15M1.5R M15 × 1.5 REG P4 5 90 30.0 3 10.5 － － 3 ●

15M1R M15 × 1 REG P3 5 90 30.0 3 10.5 － － 3 ●

16M2R M16 × 2 REG P4 5 95 32.0 3 12.5 － － 3 ●

16M1.5R M16 × 1.5 REG P4 5 95 32.0 3 12.5 － － 3 ●

16M1R M16 × 1 REG P3 5 95 32.0 3 12.5 － － 3 ●

17M1.5R M17 × 1.5 REG P4 5 95 32.0 3 13.0 － － 3 ●

17M1R M17 × 1 REG P3 5 95 32.0 3 13.0 － － 3 ●

18M2.5R M18 × 2.5 REG P5 5 100 37.0 3 14.0 － － 3 ●

18M2R M18 × 2 REG P4 5 100 37.0 3 14.0 － － 3 ●

18M1.5R M18 × 1.5 REG P4 5 100 37.0 3 14.0 － － 3 ●

18M1R M18 × 1 REG P3 5 100 37.0 3 14.0 － － 3 ●

20M2.5R M20 × 2.5 REG P5 5 105 37.0 3 15.0 － － 3 ●

20M2R M20 × 2 REG P4 5 105 37.0 3 15.0 － － 3 ●

20M1.5R M20 × 1.5 REG P4 5 105 37.0 3 15.0 － － 3 ●

20M1R M20 × 1 REG P3 5 105 37.0 3 15.0 － － 3 ●

22M2.5R M22 × 2.5 REG P5 5 115 38.0 3 17.0 － － 3 ●

22M2R M22 × 2 REG P4 5 115 38.0 3 17.0 － － 3 ●

22M1.5R M22 × 1.5 REG P4 5 115 38.0 3 17.0 － － 3 ●

22M1R M22 × 1 REG P3 5 115 38.0 3 17.0 － － 3 ●

24M3R M24 × 3 REG P5 5 120 45.0 3 19.0 － － 3 ●

24M2R M24 × 2 REG P4 5 120 45.0 3 19.0 － － 3 ●

24M1.5R M24 × 1.5 REG P4 5 120 45.0 3 19.0 － － 3 ●

24M1R M24 × 1 REG P3 5 120 45.0 3 19.0 － － 3 ●

单位 (Unit)：㎜

23

LIST 7952 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

3M0.5R

100 M3×0.5

REG P3

3M0.5R+1 REG+1 P4 5 11.0 3 4.0 18 1 ●

3M0.5R+2 REG+2 P5

3M0.35R 100 M3×0.35 REG P2 5 7.8 3 4.0 18 1 ● 3M0.35R+1 REG+1 P3

3.5M0.6R 100 M3.5×0.6 REG P2 5 13.0 3 4.0 19 1 ●

3.5M0.35R 100 M3.5×0.35 REG P2 5 7.8 3 4.0 19 1 ●

4M0.7R

100 M4×0.7

REG P3

4M0.7R+1 REG+1 P4 5 13.0 3 5.0 21 1 ●

4M0.7R+2 REG+2 P5

4M0.5R 100 M4×0.5 REG P3 5 10.0 3 5.0 21 1 ● 4M0.5R+1 REG+1 P4

4.5M0.75R 100 M4.5×0.75 REG P3 5 13.0 3 5.0 21 1 ●

4.5M0.5R 100 M4.5×0.5 REG P3 5 10.0 3 5.0 21 1 ●

5M0.8R

100 M5×0.8

REG P3

5M0.8R+1 REG+1 P4 5 16.0 3 5.5 25 1 ●

5M0.8R+2 REG+2 P5

5M0.5R 100 M5×0.5 REG P3 5 10.0 3 5.5 25 1 ● 5M0.5R+1 REG+1 P4

5.5M0.5R 100 M5.5×0.5 REG P3 5 10.0 3 5.5 25 1 ●

6M1R 100

M6×1

REG P3

5 19.0 3 6.0 30 1 ●

6M1R 150

6M1R+1 100 REG+1 P4 6M1R+1 150

6M1R+2 100 REG+2 P5 6M1R+2 150

6M0.75R 100

M6×0.75

REG P3

5 13.9 3 6.0 30 1 ● 6M0.75R 150

6M0.75R+1 100 REG+1 P4 6M0.75R+1 150

7M1R 100 M7×1 REG P3 5 19.0 3 6.2 － 2 ● 7M1R 150

7M0.75R 100 M7×0.75 REG P3 5 13.9 3 6.2 － 2 ● 7M0.75R 150

8M1.25R 100

M8×1.25

REG P3

5 22.0 3 6.2 － 2 ●

8M1.25R 150

8M1.25R+1 100 REG+1 P4 8M1.25R+1 150

8M1.25R+2 100 REG+2 P5 8M1.25R+2 150

8M1R 100

M8×1

REG P3

5 17.0 3 6.2 － 2 ● 8M1R 150

8M1R+1 100 REG+1 P4 8M1R+1 150

8M0.75R 100

M8×0.75

REG P3

5 13.9 3 6.2 － 2 ● 8M0.75R 150

8M0.75R+1 100 REG+1 P4 8M0.75R+1 150

9M1.25R 100 M9×1.25 REG P3 5 22.0 3 7.0 － 2 ● 9M1.25R 150

9M1R 100 M9×1 REG P3 5 17.0 3 7.0 － 2 ● 9M1R 150

9M0.75R 100 M9×0.75 REG P3 5 13.9 3 7.0 － 2 ● 9M0.75R 150

L2

TCL

DCONMS

L1

DRVL DRVS

THL 切削丝锥

规格1 2

SGPOL

SG Point Tap Long Shank

SGPOL

SG 长柄螺尖丝锥

当标准尺寸丝锥长度不够时，请使用本丝锥。

This tap is used when a standard SG Point Tap is too short.

订货方式 编码 × 全长

工具材料 涂 层

FAX

24

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

10M1.5R 100

M10×1.5

REG P4

5 24.0 3 7.0 － 2 ●

10M1.5R 150

10M1.5R+1 100 REG+1 P5 10M1.5R+1 150

10M1.5R+2 100 REG+2 P6 10M1.5R+2 150

10M1.25R 100

M10×1.25

REG P3

5 22.0 3 7.0 － 2 ● 10M1.25R 150

10M1.25R+1 100 REG+1 P4 10M1.25R+1 150

10M1R 100

M10×1

REG P3

5 17.0 3 7.0 － 2 ● 10M1R 150

10M1R+1 100 REG+1 P4 10M1R+1 150

10M0.75R 100

M10×0.75

REG P3

5 13.9 3 7.0 － 2 ● 10M0.75R 150

10M0.75R+1 100 REG+1 P4 10M0.75R+1 150

11M1.5R 100 M11×1.5 REG P4 5 25.0 3 8.0 － 2 ● 11M1.5R 150

11M1R 100 M11×1 REG P3 5 17.0 3 8.0 － 2 ● 11M1R 150

12M1.75R 100

M12×1.75

REG P4

5 29.0 3 8.5 － 2 ●

12M1.75R 150

12M1.75R+1 100 REG+1 P5 12M1.75R+1 150

12M1.75R+2 100 REG+2 P6 12M1.75R+2 150

12M1.5R 100

M12×1.5

REG P4

5 28.0 3 8.5 － 2 ● 12M1.5R 150

12M1.5R+1 100 REG+1 P5 12M1.5R+1 150

12M1.25R 100

M12×1.25

REG P4

5 23.0 3 8.5 － 2 ● 12M1.25R 150

12M1.25R+1 100 REG+1 P5 12M1.25R+1 150

12M1R 100

M12×1

REG P3

5 19.0 3 8.5 － 2 ● 12M1R 150

12M1R+1 100 REG+1 P4 12M1R+1 150

14M2R 150 M14×2 REG P4 5 30.0 3 10.5 － 2 ●

14M1.5R 150 M14×1.5 REG P4 5 28.0 3 10.5 － 2 ●

14M1.25R 150 M14×1.25 REG P4 5 23.0 3 10.5 － 2 ●

14M1R 150 M14×1 REG P3 5 19.0 3 10.5 － 2 ●

15M1.5R 150 M15×1.5 REG P4 5 28.0 3 10.5 － 2 ●

15M1R 150 M15×1 REG P3 5 19.0 3 10.5 － 2 ●

16M2R 150 M16×2 REG P4 5 32.0 3 12.5 － 2 ● 16M2R 200

16M1.5R 150 M16×1.5 REG P4 5 28.0 3 12.5 － 2 ●

16M1R 150 M16×1 REG P3 5 19.0 3 12.5 － 2 ●

17M1.5R 150 M17×1.5 REG P4 5 28.0 3 13.0 － 2 ●

17M1R 150 M17×1 REG P3 5 19.0 3 13.0 － 2 ●

18M2.5R 150 M18×2.5 REG P5 5 37.0 3 14.0 － 2 ●

18M2R 150 M18×2 REG P4 5 37.0 3 14.0 － 2 ●

18M1.5R 150 M18×1.5 REG P4 5 28.0 3 14.0 － 2 ●

18M1R 150 M18×1 REG P3 5 19.0 3 14.0 － 2 ●

20M2.5R 150 M20×2.5 REG P5 5 37.0 3 15.0 － 2 ● 20M2.5R 200

20M2R 150 M20×2 REG P4 5 37.0 3 15.0 － 2 ●

20M1.5R 150 M20×1.5 REG P4 5 28.0 3 15.0 － 2 ●

20M1R 150 M20×1 REG P3 5 19.0 3 15.0 － 2 ●

22M2.5R 150 M22×2.5 REG P5 5 38.0 3 17.0 － 2 ●

22M2R 150 M22×2 REG P4 5 38.0 3 17.0 － 2 ●

22M1.5R 150 M22×1.5 REG P4 5 28.0 3 17.0 － 2 ●

22M1R 150 M22×1 REG P3 5 19.0 3 17.0 － 2 ●

24M3R 150 M24×3 REG P5 5 45.0 3 19.0 － 2 ● 24M3R 200

24M2R 150 M24×2 REG P4 5 41.0 3 19.0 － 2 ●

24M1.5R 150 M24×1.5 REG P4 5 31.0 3 19.0 － 2 ●

24M1R 150 M24×1 REG P3 5 20.0 3 19.0 － 2 ●

单位(Unit)：㎜

SGPOL

SG 长柄螺尖丝锥

25

LIST 6850 单位(Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R

M3 × 0.5

REG P1

3M0.5R+1 REG+1 P2 2.5 46 5.6 3 4.0 20.0 2.35 1 ●

3M0.5R+2 REG+2 P3

3M0.35R M3 × 0.35 REG P1 2.5 46 4.4 3 4.0 20.0 2.55 1 ● 3M0.35R+1 REG+1 P2

3.5M0.6R M3.5 × 0.6 REG P1 2.5 48 6.8 3 4.0 20.0 2.75 1 ● 3.5M0.6R+1 REG+1 P2

3.5M0.35R M3.5 × 0.35 REG P1 2.5 48 4.4 3 4.0 20.0 2.95 1 ● 3.5M0.35R+1 REG+1 P2

4M0.7R

M4 × 0.7

REG P2

4M0.7R+1 REG+1 P3 2.5 52 8.1 3 5.0 23.0 3.15 1 ●

4M0.7R+2 REG+2 P4

4M0.5R M4 × 0.5 REG P1 2.5 52 6.1 3 5.0 23.0 3.35 1 ● 4M0.5R+1 REG+1 P2

4.5M0.75R M4.5 × 0.75 REG P2 2.5 55 8.7 3 5.0 24.0 3.55 1 ● 4.5M0.75R+1 REG+1 P3

4.5M0.5R M4.5 × 0.5 REG P1 2.5 55 6.1 3 5.0 24.0 3.85 1 ● 4.5M0.5R+1 REG+1 P2

5M0.8R

M5 × 0.8

REG P2

5M0.8R+1 REG+1 P3 2.5 60 9.4 3 5.5 26.0 4.05 1 ●

5M0.8R+2 REG+2 P4

5M0.5R M5 × 0.5 REG P1 2.5 60 6.1 3 5.5 26.0 4.35 1 ● 5M0.5R+1 REG+1 P2

5.5M0.5R M5.5 × 0.5 REG P1 2.5 60 6.1 3 5.5 27.0 4.85 1 ● 5.5M0.5R+1 REG+1 P2

6M1R

M6 × 1

REG P2

6M1R+1 REG+1 P3 2.5 62 12.0 3 6.0 29.0 4.75 1 ●

6M1R+2 REG+2 P4

6M0.75R M6 × 0.75 REG P2 2.5 62 9.2 3 6.0 29.0 5.05 1 ● 6M0.75R+1 REG+1 P3

6M0.5R M6 × 0.5 REG P1 2.5 62 6.1 3 6.0 29.0 5.35 1 ● 6M0.5R+1 REG+1 P2

7M1R M7 × 1 REG P2 2.5 65 12.0 3 6.2 29.0 5.75 2 ● 7M1R+1 REG+1 P3

7M0.75R M7 × 0.75 REG P2 2.5 65 9.2 3 6.2 29.0 6.05 2 ● 7M0.75R+1 REG+1 P3

8M1.25R

M8 × 1.25

REG P2

8M1.25R+1 REG+1 P3 2.5 70 15.4 3 6.2 33.0 6.55 3 ●

8M1.25R+2 REG+2 P4

8M1R M8 × 1 REG P2 2.5 70 12.4 3 6.2 27.0 6.75 3 ● 8M1R+1 REG+1 P3

8M0.75R M8 × 0.75 REG P2 2.5 70 9.2 3 6.2 24.5 7.05 3 ● 8M0.75R+1 REG+1 P3

9M1.25R M9 × 1.25 REG P2 2.5 72 15.4 3 7.0 33.0 7.55 3 ● 9M1.25R+1 REG+1 P3

9M1R M9 × 1 REG P2 2.5 72 12.4 3 7.0 27.0 7.75 3 ● 9M1R+1 REG+1 P3

9M0.75R M9 × 0.75 REG P2 2.5 72 9.2 3 7.0 24.5 8.05 3 ● 9M0.75R+1 REG+1 P3

10M1.5R

M10 × 1.5

REG P2

10M1.5R+1 REG+1 P3 2.5 75 18.9 3 7.0 37.0 8.25 3 ●

10M1.5R+2 REG+2 P4

10M1.25R M10 × 1.25 REG P2 2.5 75 15.7 3 7.0 33.0 8.55 3 ● 10M1.25R+1 REG+1 P3

10M1R M10 × 1 REG P2 2.5 75 12.4 3 7.0 27.0 8.75 3 ● 10M1R+1 REG+1 P3

10M0.75R M10 × 0.75 REG P2 2.5 75 9.2 3 7.0 25.0 9.05 3 ● 10M0.75R+1 REG+1 P3

11M1.5R M11 × 1.5 REG P2 2.5 80 18.9 3 8.0 37.0 9.25 3 ● 11M1.5R+1 REG+1 P3

11M1R M11 × 1 REG P2 2.5 80 12.4 3 8.0 27.0 9.75 3 ● 11M1R+1 REG+1 P3

11M0.75R M11 × 0.75 REG P2 2.5 80 9.2 3 8.0 25.0 10.05 3 ● 11M0.75R+1 REG+1 P3 DN

L2

TCL

DCONMS

L1

DRVL

DRVS

THL

3

2

切削丝锥

规格1

ZSP

Hyper Z Spiral Tap

ZSP

螺旋槽丝锥

是一种加工领域广且长寿命、偏差较小、高性能的新式泛用型丝锥。

High performance taps which have long tool life and stable tapping in various cutting condition.

New general-purpose tap series for blind holes.

订货方式 编码

工具材料 表面处理 螺旋角

43o

HSS-E 特殊

26

单位(Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

12M1.75R

M12 × 1.75

REG P3

12M1.75R+1 REG+1 P4 2.5 82 22.4 3 8.5 42.0 9.95 3 ●

12M1.75R+2 REG+2 P5

12M1.5R M12 × 1.5 REG P2 2.5 82 20.9 3 8.5 40.0 10.25 3 ● 12M1.5R+1 REG+1 P3

12M1.25R M12 × 1.25 REG P2 2.5 82 17.2 3 8.5 35.0 10.55 3 ● 12M1.25R+1 REG+1 P3

12M1R M12 × 1 REG P2 2.5 82 13.5 3 8.5 33.0 10.75 3 ● 12M1R+1 REG+1 P3

14M2R M14 × 2 REG P3 2.5 88 25.9 3 10.5 46.0 11.65 3 ● 14M2R+1 REG+1 P4

14M1.5R M14 × 1.5 REG P2 2.5 88 20.9 3 10.5 40.0 12.25 3 ● 14M1.5R+1 REG+1 P3

14M1.25R M14 × 1.25 REG P2 2.5 88 17.2 3 10.5 35.0 12.55 3 ●

14M1R M14 × 1 REG P2 2.5 88 13.5 3 10.5 33.0 12.75 3 ●

16M2R M16 × 2 REG P3 2.5 95 25.9 3 12.5 49.0 13.65 3 ● 16M2R+1 REG+1 P4

16M1.5R M16 × 1.5 REG P2 2.5 95 20.9 3 12.5 40.0 14.25 3 ● 16M1.5R+1 REG+1 P3

16M1R M16 × 1 REG P2 2.5 95 13.5 3 12.5 33.0 14.75 3 ●

18M2.5R M18 × 2.5 REG P3 2.5 100 32.6 4 14.0 55.0 15.15 3 ● 18M2.5R+1 REG+1 P4

18M2R M18 × 2 REG P3 2.5 100 29.0 4 14.0 49.0 15.65 3 ●

18M1.5R M18 × 1.5 REG P2 2.5 100 20.9 4 14.0 40.0 16.25 3 ● 18M1.5R+1 REG+1 P3

18M1R M18 × 1 REG P2 2.5 100 13.5 4 14.0 33.0 16.75 3 ●

20M2.5R M20 × 2.5 REG P3 2.5 105 32.6 4 15.0 55.0 17. 1 5 3 ● 20M2.5R+1 REG+1 P4

20M2R M20 × 2 REG P3 2.5 105 29.0 4 15.0 49.0 17.65 3 ●

20M1.5R M20 × 1.5 REG P2 2.5 105 20.9 4 15.0 40.0 18.25 3 ● 20M1.5R+1 REG+1 P3

20M1R M20 × 1 REG P2 2.5 105 13.5 4 15.0 33.0 18.75 3 ●

22M2.5R M22 × 2.5 REG P3 2.5 115 32.6 4 17.0 55.0 19.1 5 3 ● 22M2.5R+1 REG+1 P4

22M2R M22 × 2 REG P3 2.5 115 29.0 4 17.0 49.0 19.65 3 ●

22M1.5R M22 × 1.5 REG P2 2.5 115 20.9 4 17.0 40.0 20.25 3 ● 22M1.5R+1 REG+1 P3

22M1R M22 × 1 REG P2 2.5 115 13.5 4 17.0 33.0 20.75 3 ●

24M3R M24 × 3 REG P3 2.5 120 38.8 4 19.0 63.0 20.65 3 ● 24M3R+1 REG+1 P4

24M2R M24 × 2 REG P3 2.5 120 30.8 4 19.0 53.0 21.65 3 ●

24M1.5R M24 × 1.5 REG P2 2.5 120 22.4 4 19.0 50.0 22.25 3 ● 24M1.5R+1 REG+1 P3

24M1R M24 × 1 REG P2 2.5 120 14.7 4 19.0 37.0 22.75 3 ●

ZSP

螺旋槽丝锥

27

LIST 6854 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 DN Type Stock

3M0.5R 100

M3 × 0.5

REG P1

3M0.5R+1 100 REG+1 P2 2.5 5.6 3 4.0 20.0 2.35 1 ●

3M0.5R+2 100 REG+2 P3

3M0.35R 100 M3 × 0.35 REG P1 2.5 4.4 3 4.0 20.0 2.55 1 ● 3M0.35R+1 100 REG+1 P2

4M0.7R 100

M4 × 0.7

REG P2

4M0.7R+1 100 REG+1 P3 2.5 8.1 3 5.0 23.0 3.15 1 ●

4M0.7R+2 100 REG+2 P4

4M0.5R 100 M4 × 0.5 REG P1 2.5 6.1 3 5.0 23.0 3.35 1 ● 4M0.5R+1 100 REG+1 P2

5M0.8R 100

M5 × 0.8

REG P2

5M0.8R+1 100 REG+1 P3 2.5 9.4 3 5.5 26.0 4.05 1 ●

5M0.8R+2 100 REG+2 P4

5M0.5R 100 M5 × 0.5 REG P1 2.5 6.1 3 5.5 26.0 4.35 1 ● 5M0.5R+1 100 REG+1 P2

6M1R 100

M6 × 1

REG P2

2.5 12.0 3 6.0 29.0 4.75 1 ●

6M1R 150

6M1R+1 100 REG+1 P3 6M1R+1 150

6M1R+2 100 REG+2 P4 6M1R+2 150

6M0.75R 100

M6 × 0.75

REG P2

2.5 9.2 3 6.0 29.0 5.05 1 ● 6M0.75R 150

6M0.75R+1 100 REG+1 P3 6M0.75R+1 150

8M1.25R 100

M8 × 1.25

REG P2

2.5 15.4 3 6.2 33.0 6.55 2 ●

8M1.25R 150

8M1.25R+1 100 REG+1 P3 8M1.25R+1 150

8M1.25R+2 100 REG+2 P4 8M1.25R+2 150

8M1R 100

M8 × 1

REG P2

2.5 12.4 3 6.2 27.0 6.75 2 ● 8M1R 150

8M1R+1 100 REG+1 P3 8M1R+1 150

8M0.75R 100

M8 × 0.75

REG P2

2.5 9.2 3 6.2 24.5 7.05 2 ● 8M0.75R 150

8M0.75R+1 100 REG+1 P3 8M0.75R+1 150

10M1.5R 100

M10 × 1.5

REG P2

2.5 18.9 3 7.0 36.5 8.25 2 ●

10M1.5R 150

10M1.5R+1 100 REG+1 P3 10M1.5R+1 150

10M1.5R+2 100 REG+2 P4 10M1.5R+2 150

10M1.25R 100

M10 × 1.25

REG P2

2.5 15.7 3 7.0 33.0 8.55 2 ● 10M1.25R 150

10M1.25R+1 100 REG+1 P3 10M1.25R+1 150

10M1R 100

M10 × 1

REG P2

2.5 12.4 3 7.0 27.0 8.75 2 ● 10M1R 150

10M1R+1 100 REG+1 P3 10M1R+1 150

10M0.75R 100

M10 × 0.75

REG P2

2.5 9.2 3 7.0 24.5 9.05 2 ● 10M0.75R 150

10M0.75R+1 100 REG+1 P3 10M0.75R+1 150

DN

L2

TCL

DCONMS

L1

DRVL

DRVS

THL

规格1 2

切削丝锥

ZSPL

Hyper Z Spiral Tap Long Shank

ZSPL

长柄螺旋槽丝锥

当标准尺寸丝锥长度不够时，请使用本丝锥。

This tap is used when a standard Hyper Z Spiral Tap is too short.

订货方式

工具材料 表面处理 螺旋角

43o

HSS-E 特殊

编码 × 全长

28

单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 DN Type Stock

12M1.75R 100

M12 × 1.75

REG P3

2.5 22.4 3 8.5 41.5 9.95 2 ●

12M1.75R 150

12M1.75R+1 100 REG+1 P4 12M1.75R+1 150

12M1.75R+2 100 REG+2 P5 12M1.75R+2 150

12M1.5R 100

M12 × 1.5

REG P2

2.5 20.9 3 8.5 40.0 10.25 2 ● 12M1.5R 150

12M1.5R+1 100 REG+1 P3 12M1.5R+1 150

12M1.25R 100

M12 × 1.25

REG P2

2.5 17.2 3 8.5 34.5 10.55 2 ● 12M1.25R 150

12M1.25R+1 100 REG+1 P3 12M1.25R+1 150

12M1R 100

M12 × 1

REG P2

2.5 13.5 3 8.5 32.5 10.75 2 ● 12M1R 150

12M1R+1 100 REG+1 P3 12M1R+1 150

14M2R 150 M14 × 2 REG P3 2.5 25.9 3 10.5 45.5 11.65 2 ●

14M1.5R 150 M14 × 1.5 REG P2 2.5 20.9 3 10.5 40.0 12.25 2 ●

14M1.25R 150 M14 × 1.25 REG P2 2.5 17.2 3 10.5 34.5 12.55 2 ●

14M1R 150 M14 × 1 REG P2 2.5 13.5 3 10.5 32.5 12.75 2 ●

16M2R 150 M16 × 2 REG P3 2.5 25.9 3 12.5 48.5 13.65 2 ● 16M2R 200

16M1.5R 150 M16 × 1.5 REG P2 2.5 20.9 3 12.5 40.0 14.25 2 ●

16M1R 150 M16 × 1 REG P2 2.5 13.5 3 12.5 32.5 14.75 2 ●

18M2.5R 150 M18 × 2.5 REG P3 2.5 32.6 4 14.0 55.0 15. 1 5 2 ●

18M2R 150 M18 × 2 REG P3 2.5 29.0 4 14.0 48.5 15.65 2 ●

18M1.5R 150 M18 × 1.5 REG P2 2.5 20.9 4 14.0 40.0 16.25 2 ●

18M1R 150 M18 × 1 REG P2 2.5 13.5 4 14.0 32.5 16.75 2 ●

20M2.5R 150 M20 × 2.5 REG P3 2.5 32.6 4 15.0 55.0 17. 1 5 2 ● 20M2.5R 200

20M2R 150 M20 × 2 REG P3 2.5 29.0 4 15.0 48.5 17.65 2 ●

20M1.5R 150 M20 × 1.5 REG P2 2.5 20.9 4 15.0 40.0 18.25 2 ●

20M1R 150 M20 × 1 REG P2 2.5 13.5 4 15.0 32.5 18.75 2 ●

22M2.5R 150 M22 × 2.5 REG P3 2.5 32.6 4 17.0 55.0 19. 1 5 2 ●

22M2R 150 M22 × 2 REG P3 2.5 29.0 4 17.0 48.5 19.65 2 ●

22M1.5R 150 M22 × 1.5 REG P2 2.5 20.9 4 17.0 40.0 20.25 2 ●

22M1R 150 M22 × 1 REG P2 2.5 13.5 4 17.0 32.5 20.75 2 ●

24M3R 150 M24 × 3 REG P3 2.5 38.8 4 19.0 63.0 20.65 2 ● 24M3R 200

24M2R 150 M24 × 2 REG P3 2.5 30.8 4 19.0 53.0 21.65 2 ●

24M1.5R 150 M24 × 1.5 REG P2 2.5 22.4 4 19.0 49.5 22.25 2 ●

24M1R 150 M24 × 1 REG P2 2.5 14.7 4 19.0 36.5 22.75 2 ●

ZSPL

长柄螺旋槽丝锥

29

LIST 6858 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R M3 × 0.5 REG P2 2.5 46 5.6 3 4.0 20 2.35 1 ●

3M0.35R M3 × 0.35 REG P2 2.5 46 4.4 3 4.0 20 2.55 1 ●

4M0.7R M4 × 0.7 REG P3 2.5 52 8.1 3 5.0 23 3.15 1 ●

4M0.5R M4 × 0.5 REG P2 2.5 52 6.1 3 5.0 23 3.35 1 ●

5M0.8R M5 × 0.8 REG P3 2.5 60 9.4 3 5.5 26 4.05 1 ●

5M0.5R M5 × 0.5 REG P2 2.5 60 6.1 3 5.5 26 4.35 1 ●

6M1R M6 × 1 REG P3 2.5 62 12.0 3 6.0 29 4.75 1 ●

6M0.75R M6 × 0.75 REG P3 2.5 62 9.2 3 6.0 29 5.05 1 ●

6M0.5R M6 × 0.5 REG P2 2.5 62 6.1 3 6.0 29 5.35 1 ●

8M1.25R M8 × 1.25 REG P3 2.5 70 15.4 3 6.2 33 6.55 2 ●

8M1R M8 × 1 REG P3 2.5 70 12.4 3 6.2 27 6.75 2 ●

8M0.75R M8 × 0.75 REG P3 2.5 70 9.2 3 6.2 25 7.05 2 ●

10M1.5R M10 × 1.5 REG P3 2.5 75 18.9 3 7.0 37 8.25 2 ●

10M1.25R M10 × 1.25 REG P3 2.5 75 15.7 3 7.0 33 8.55 2 ●

10M1R M10 × 1 REG P3 2.5 75 12.4 3 7.0 27 8.75 2 ●

10M0.75R M10 × 0.75 REG P3 2.5 75 9.2 3 7.0 25 9.05 2 ●

12M1.75R M12 × 1.75 REG P4 2.5 82 22.4 3 8.5 42 9.95 2 ●

12M1.5R M12 × 1.5 REG P3 2.5 82 20.9 3 8.5 40 10.25 2 ●

12M1.25R M12 × 1.25 REG P3 2.5 82 17.2 3 8.5 35 10.55 2 ●

12M1R M12 × 1 REG P3 2.5 82 13.5 3 8.5 33 10.75 2 ●

14M2R M14 × 2 REG P4 2.5 88 25.9 3 10.5 46 11.65 2 ●

14M1.5R M14 × 1.5 REG P3 2.5 88 20.9 3 10.5 40 12.25 2 ●

16M2R M16 × 2 REG P4 2.5 95 25.9 3 12.5 49 13.65 2 ●

16M1.5R M16 × 1.5 REG P3 2.5 95 20.9 3 12.5 40 14.25 2 ●

18M2.5R M18 × 2.5 REG P4 2.5 100 32.6 4 14.0 55 15.15 2 ●

18M1.5R M18 × 1.5 REG P3 2.5 100 20.9 4 14.0 40 16.25 2 ●

20M2.5R M20 × 2.5 REG P4 2.5 105 32.6 4 15.0 55 17.15 2 ●

20M1.5R M20 × 1.5 REG P3 2.5 105 20.9 4 15.0 40 18.25 2 ●

22M2.5R M22 × 2.5 REG P4 2.5 115 32.6 4 17.0 55 19.15 2 ●

22M1.5R M22 × 1.5 REG P3 2.5 115 20.9 4 17.0 40 20.25 2 ●

24M3R M24 × 3 REG P4 2.5 120 38.8 4 19.0 63 20.65 2 ●

24M1.5R M24 × 1.5 REG P3 2.5 120 22.4 4 19.0 50 22.25 2 ●

寿命和铁屑的比较

Compare machining life and chip

161

280 253

某螺旋槽丝锥

不锈钢专用

Spiral tap

for stainless steel

73

加工孔数

Number of holes

200

100

300

400

500

600

0

约2.3倍

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

Thread size

Workpiece material

Cutting speed

M3×0.5

SUS304

5m/min

螺纹深度

使用机械

水溶性切削油剂

Depth

Machine Vertical Machining center

Water-soluble cutting oil

6mm

立式加工中心

某螺旋槽丝锥

不锈钢专用

Spiral tap

for stainless steel

某螺旋槽丝锥 不锈钢专用

Spiral tap for stainless steel

加工孔数

Number of holes

0

约3.3倍

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

Thread size

Workpiece material

Cutting speed

M12×1.75

SUS304

10m/min

螺纹深度

使用机械

水溶性切削油剂

Depth

Machine Vertical Machining center

Water-soluble cutting oil

18mm

立式加工中心

Entwining and winding are caused by uneven stretch of chips at end of hole

当孔端伸出的铁屑不均匀，是发生铁屑缠绕、卷曲的要因

Stable cutting by discharging constant chips

均匀的铁屑排出、稳定加工

ZSP-SUS ZSP-SUS

ZSP-SUS 140 160

520 480

200

100

300

400

500

600

切削丝锥

规格1 2

TCL

DN

L2 THL

DCONMS

L1

DRVL

DRVS

ZSP-SUS

Hyper Z Spiral Tap for Stainless Steel

ZSP-SUS

不锈钢用螺旋丝锥（PAT.P）

是一种在不锈钢加工领域中长寿命、偏差较小、高性能的丝锥。

In stainless steel processing, high performance tap which have long tool life with small fluctuations.

订货方式

工具材料 表面处理 螺旋角

51o

HSS-E 特殊

编码

30

LIST 7962 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R M3 × 0.5 REG P3 3 46 5.6 3 4.0 20.0 2.35 1 ●

4M0.7R M4 × 0.7 REG P3 3 52 8.1 3 5.0 23.0 3.15 1 ●

5M0.8R M5 × 0.8 REG P3 3 60 9.4 3 5.5 26.0 4.05 1 ●

6M1R M6 × 1 REG P3 3 62 12.0 3 6.0 29.0 4.75 1 ●

8M1.25R M8 × 1.25 REG P3 3 70 15.4 3 6.2 33.0 6.55 2 ●

10M1.5R M10 × 1.5 REG P3 3 75 18.9 3 7.0 37.0 8.25 2 ●

10M1.25R M10 × 1.25 REG P3 3 75 15.7 3 7.0 33.0 8.55 2 ●

12M1.75R M12 × 1.75 REG P3 3 82 22.4 3 8.5 42.0 9.95 2 ●

12M1.5R M12 × 1.5 REG P3 3 82 20.9 3 8.5 40.0 10.25 2 ●

12M1.25R M12 × 1.25 REG P4 3 82 17.2 3 8.5 35.0 10.55 2 ●

规格1 2

切削丝锥

DN

DCONMS

L2

TCL

L1

DRVL DRVS

THL

ZSP-LS

Hyper Z Low Spiral Tap

ZSP-LS

小螺旋角丝锥

高硬度钢、卧式加工中心均能实现稳定加工

Achieves stable screw threads cutting even hardened steel, even horizontal machining center

订货方式

工具材料 涂层 螺旋角

12o

FAX 特殊

编码

31

编码

Code

螺纹尺寸

Thread Size

等级

TAP Limit

切削锥部 (P)

TCL (P)

全长

L1

螺纹长度

THL

沟槽数

NOF

柄径

DCONMS

颈长

L2

颈径

DN

规格

Type

库存

Stock

ZSP-T2.5M0.45 M2.5×0.45 REG P2 2.5 44 9.5 3 3.0 16 2.55* 1 □

ZSP-T2.6M0.45 M2.6×0.45 REG P2 2.5 44 9.5 3 3.0 16 2.65* 1 □

ZSP-T3M0.5 M3×0.5 REG P3 2.5 46 5.6 3 4.0 20 2.35 2 □

ZSP-T4M0.7 M4×0.7 REG P3 2.5 52 8.1 3 5.0 23 3.15 2 □

ZSP-T5M0.8 M5×0.8 REG P3 2.5 60 9.4 3 5.5 26 4.05 2 □

ZSP-T6M1 M6×1 REG P3 2.5 62 12.0 3 6.0 29 4.75 2 □

ZSP-T8M1.25 M8×1.25 REG P3 2.5 70 15.4 3 6.2 33 6.55 4 □

ZSP-T10M1.5 M10×1.5 REG P3 2.5 75 18.9 3 7.0 37 8.25 4 □

ZSP-T10M1.25 M10×1.25 REG P3 2.5 75 15.7 3 7.0 33 8.55 4 □

ZSP-T12M1.75 M12×1.75 REG P4 2.5 82 22.4 3 8.5 42 9.95 4 □

ZSP-T12M1.5 M12×1.5 REG P3 2.5 82 20.9 3 8.5 40 10.25 4 □

ZSP-T12M1.25 M12×1.25 REG P3 2.5 82 17.2 3 8.5 35 10.55 4 □

ZSP-T14M2 M14×2 REG P4 2.5 88 25.9 3 10.5 46 11.65 4 □

ZSP-T14M1.5 M14×1.5 REG P3 2.5 88 20.9 3 10.5 40 12.25 4 □

ZSP-T16M2 M16×2 REG P4 2.5 95 25.9 3 12.5 49 13.65 4 □

ZSP-T16M1.5 M16×1.5 REG P3 2.5 95 20.9 3 12.5 40 14.25 4 □

＊ ：螺纹直径 < 颈径，内螺纹加工深度较深时，如攻丝深度超过螺纹长度，则会有折断的危险。

＊ ：Thread Size ＜ Neck diameter (DN) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage.

单位 (Unit)：㎜

编码

Code

螺纹尺寸

Thread Size

等级

TAP Limit

切削锥部 (P)

TCL (P)

全长

L1

螺纹长度

THL

沟槽数

NOF

柄径

DCONMS

颈长

L2

颈径

DN

规格

Type

库存

Stock

ZSP-T4-40 No. 4-40UNC REG P3 2.5 44 6.9 3 3.0 16.0 2.05 2 □

ZSP-T5-40 No. 5-40UNC REG P3 2.5 46 6.9 3 4.0 17.5 2.35 2 □

ZSP-T6-32 No. 6-32UNC REG P3 2.5 48 9.5 3 4.0 21.0 2.55 2 □

ZSP-T6-40 No. 6-40UNF REG P3 2.5 48 6.9 3 4.0 21.0 2.75 2 □

ZSP-T8-32 No. 8-32UNC REG P3 2.5 52 9.5 3 5.0 21.0 3.15 2 □

ZSP-T8-36 No. 8-36UNF REG P3 2.5 52 7.9 3 5.0 21.0 3.25 2 □

ZSP-T10-24 No.10-24UNC REG P3 2.5 60 12.6 3 5.5 26.0 3.55 2 □

ZSP-T10-32 No.10-32UNF REG P3 2.5 60 9.5 3 5.5 26.0 3.85 2 □

ZSP-T12-24 No.12-24UNC REG P3 2.5 60 12.6 3 5.5 26.0 4.25 2 □

ZSP-T1/4-20 1/4-20UNC REG P3 2.5 62 15.4 3 6.0 32.0 4.85 2 □

ZSP-T1/4-28 1/4-28UNF REG P3 2.5 62 10.5 3 6.0 32.0 5.25 2 □

ZSP-T5/16-18 5/16-18UNC REG P3 2.5 70 17.7 3 6.1 31.5 6.25 4 □

ZSP-T5/16-24 5/16-24UNF REG P3 2.5 70 12.2 3 6.1 27.5 6.65 4 □

ZSP-T3/8-16 3/8-16UNC REG P3 2.5 75 19.9 3 7.0 33.5 7.65 4 □

ZSP-T3/8-24 3/8-24UNF REG P3 2.5 75 12.2 3 7.0 27.5 8.25 4 □

ZSP-T7/16-14 7/16-14UNC REG P4 2.5 80 22.7 3 8.0 36.0 9.05 4 □

ZSP-T7/16-20 7/16-20UNF REG P3 2.5 80 15.9 3 8.0 30.0 9.65 4 □

ZSP-T1/2-13 1/2-13UNC REG P4 2.5 85 26.0 3 9.0 44.5 10.45 4 □

ZSP-T1/2-20 1/2-20UNF REG P3 2.5 85 16.4 3 9.0 35.5 11.15 4 □

ZSP-T5/8-11 5/8-11UNC REG P4 2.5 95 30.1 3 12.0 48.5 13.25 4 □

ZSP-T5/8-18 5/8-18UNF REG P3 2.5 95 18.6 3 12.0 37.5 14.25 4 □

●美制螺纹用

●公制螺纹用 单位 (Unit)：㎜

15o

FAX

切削丝锥

DN

L2

TCL

DCONMS

L1

THL

规格1 2

3 4

DRVL

Hyper Z Hyper Z Spiral Tap for Titanium Alloy

ZSP-T

实现铁屑形状管理，使铁屑排出性稳定。降低丝锥反转时铁屑咬入。

Achieves stable chip evacuation by controlling the chip shape.Reduces chip biting when the tap is reversed.

订货方式 编码

合金用螺旋槽丝锥 (PAT)

ZSP-T 51o

32

编码

Code

螺纹尺寸

Thread Size

等级

TAP Limit

切削锥部 (P)

TCL (P)

全长

L1

螺纹长度

THL

沟槽数

NOF

柄径

DCONMS

颈长

L2

颈径

DN

规格

Type

库存

Stock

ZSP-T-HL2.5M0.45 M2.5×0.45 1b 2.5 44 5.0 3 4.0 17.0 2.45 2 □

ZSP-T-HL2.6M0.45 M2.6×0.45 1b 2.5 44 5.0 3 4.0 17.0 2.55 2 □

ZSP-T-HL3M0.5 M3×0.5 1b 2.5 46 5.6 3 4.0 20.0 2.95 2 □

ZSP-T-HL4M0.7 M4×0.7 1b 2.5 52 8.1 3 5.5 23.0 4.05 2 □

ZSP-T-HL5M0.8 M5×0.8 1b 2.5 60 9.4 3 6.0 26.0 5.05 2 □

ZSP-T-HL6M1 M6×1 1b 2.5 62 12.0 3 6.2 29.0 6.05 3 □

ZSP-T-HL8M1.25 M8×1.25 1b 2.5 70 15.4 3 7.0 33.0 8.15 4 □

ZSP-T-HL10M1.5 M10×1.5 1b 2.5 75 18.9 3 8.5 36.5 10.15 4 □

ZSP-T-HL10M1.25 M10×1.25 1b 2.5 75 15.7 3 8.5 33.0 10.15 4 □

ZSP-T-HL12M1.75 M12×1.75 1b 2.5 82 22.4 3 10.5 41.5 12.25 4 □

ZSP-T-HL12M1.5 M12×1.5 1b 2.5 82 20.9 3 10.5 40.0 12.15 4 □

ZSP-T-HL12M1.25 M12×1.25 1b 2.5 82 17.2 3 10.5 34.5 12.15 4 □

ZSP-T-HL14M2 M14×2 1b 2.5 88 25.9 3 13.0 46.0 14.25 4 □

ZSP-T-HL14M1.5 M14×1.5 1b 2.5 88 20.9 3 12.5 40.0 14.15 4 □

ZSP-T-HL16M2 M16×2 1b 2.5 95 25.9 3 14.0 49.0 16.25 4 □

ZSP-T-HL16M1.5 M16×1.5 1b 2.5 95 20.9 3 14.0 40.0 16.15 4 □

●公制航空航天螺纹用 单位 (Unit)：㎜

单位 (Unit)：㎜

编码

Code

螺纹尺寸

Thread Size

等级

TAP Limit

切削锥部 (P)

TCL (P)

全长

L1

螺纹长度

THL

沟槽数

NOF

柄径

DCONMS

颈长

L2

颈径

DN

规格

Type

库存

Stock

ZSP-T-HL4-40 No. 4-40UNC 1b 2.5 44 6.9 3 4.0 16.0 2.85 2 □

ZSP-T-HL5-40 No. 5-40UNC 1b 2.5 46 6.9 3 5.0 17.5 3.15 2 □

ZSP-T-HL6-32 No. 6-32UNC 1b 2.5 48 9.5 3 5.0 21.0 3.55 2 □

ZSP-T-HL6-40 No. 6-40UNF 1b 2.5 48 6.9 3 5.0 21.0 3.55 2 □

ZSP-T-HL8-32 No. 8-32UNC 1b 2.5 52 9.5 3 5.5 21.0 4.25 2 □

ZSP-T-HL8-36 No. 8-36UNF 1b 2.5 52 7.9 3 5.5 21.0 4.15 2 □

ZSP-T-HL10-24 No.10-24UNC 1b 2.5 60 12.6 3 6.0 26.0 4.95 2 □

ZSP-T-HL10-32 No.10-32UNF 1b 2.5 60 9.5 3 6.0 26.0 4.85 2 □

ZSP-T-HL12-24 No.12-24UNC 1b 2.5 60 12.6 3 6.2 26.0 5.55 3 □

ZSP-T-HL1/4-20 1/4-20UNC 1b 2.5 62 15.4 3 6.2 30.0 6.45 4 □

ZSP-T-HL1/4-28 1/4-28UNF 1b 2.5 62 10.5 3 6.2 25.0 6.45 4 □

ZSP-T-HL5/16-18 5/16-18UNC 1b 2.5 70 17.7 3 7.0 31.5 8.15 4 □

ZSP-T-HL5/16-24 5/16-24UNF 1b 2.5 70 12.2 3 7.0 27.5 8.05 4 □

ZSP-T-HL3/8-16 3/8-16UNC 1b 2.5 75 19.9 3 8.5 33.5 9.75 4 □

ZSP-T-HL3/8-24 3/8-24UNF 1b 2.5 75 12.2 3 8.0 27.5 9.65 4 □

ZSP-T-HL7/16-14 7/16-14UNC 1b 2.5 80 22.7 3 10.5 36.0 11.35 4 □

ZSP-T-HL7/16-20 7/16-20UNF 1b 2.5 80 15.9 3 9.0 30.0 11.25 4 □

ZSP-T-HL1/2-13 1/2-13UNC 1b 2.5 85 26.0 3 12.0 44.5 12.95 4 □

ZSP-T-HL1/2-20 1/2-20UNF 1b 2.5 85 16.4 3 10.5 35.5 12.85 4 □

ZSP-T-HL5/8-11 5/8-11UNC 1b 2.5 95 30.1 3 14.0 48.5 16.25 4 □

ZSP-T-HL5/8-18 5/8-18UNF 1b 2.5 95 18.6 3 14.0 37.5 16.05 4 □

●美制航空航天螺纹用

15o

FAX

切削丝锥

DN

L2

TCL

DCONMS

L1

THL

规格1 2

3 4

DRVL

ZSP-T-HL

Spiral Tap for Titanium Alloy for helisert

ZSP-T-HL

实现铁屑形状管理，使铁屑排出性稳定。降低丝锥反转时铁屑咬入。

Achieves stable chip evacuation by controlling the chip shape. Reduces chip biting when the tap is reversed.

订货方式 编码

钛合金航空航天用螺旋槽

33

工具材料

HSS-E

表面处理

特殊

LIST 6852 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R

M3 × 0.5

REG P2

3M0.5R+1 REG+1 P3 5 46 10.0 3 4.0 18 2.4 1 ●

3M0.5R+2 REG+2 P4

3M0.35R M3 × 0.35 REG P1 5 46 8.0 3 4.0 18 2.4 1 ● 3M0.35R+1 REG+1 P2

3.5M0.6R M3.5 × 0.6 REG P2

5 48 11.0 3 4.0 18 2.8 1 ● 3.5M0.6R+1 REG+ 1 P3

3.5M0.35R M3.5 × 0.35 REG P1 5 48 8.0 3 4.0 18 2.8 1 ● 3.5M0.35R+1 REG+ 1 P2

4M0.7R

M4 × 0.7

REG P2

4M0.7R+1 REG+ 1 P3 5 52 12.5 3 5.0 18 3.1 1 ●

4M0.7R+2 REG+ 2 P4

4M0.5R M4 × 0.5 REG P2

5 52 10.0 3 5.0 18 3.1 1 ● 4M0.5R+1 REG+1 P3

4.5M0.75R M4.5 × 0.75 REG P2

5 55 13.5 3 5.0 20 3.6 1 ● 4.5M0.75R+1 REG+ 1 P3

4.5M0.5R M4.5 × 0.5 REG P2

5 55 10.0 3 5.0 20 3.6 1 ● 4.5M0.5R+1 REG+ 1 P3

5M0.8R

M5 × 0.8

REG P2

5M0.8R+1 REG+1 P3 5 60 14.5 3 5.5 25 4.0 1 ●

5M0.8R+2 REG+2 P4

5M0.5R M5 × 0.5 REG P2

5 60 10.0 3 5.5 25 4.0 1 ● 5M0.5R+1 REG+ 1 P3

5.5M0.5R M5.5 × 0.5 REG P2

5 60 10.0 3 5.5 26 4.4 1 ● 5.5M0.5R+1 REG+ 1 P3

6M1R

M6 × 1

REG P2

6M1R+1 REG+ 1 P3 5 62 17.0 3 6.0 28 4.8 1 ●

6M1R+2 REG+ 2 P4

6M0.75R M6 × 0.75 REG P2

5 62 14.0 3 6.0 28 4.8 1 ● 6M0.75R+1 REG+1 P3

6M0.5R M6 × 0.5 REG P2

5 62 10.0 3 6.0 28 4.8 1 ● 6M0.5R+1 REG+1 P3

7M1R M7 × 1 REG P2

5 65 17.0 3 6.2 － － 2 ● 7M1R+1 REG+ 1 P3

7M0.75R M7 × 0.75 REG P2

5 65 14.0 3 6.2 － － 2 ● 7M0.75R+1 REG+ 1 P3

8M1.25R

M8 × 1.25

REG P3

8M1.25R+1 REG+ 1 P4 5 70 22.0 3 6.2 － － 2 ●

8M1.25R+2 REG+ 2 P5

8M1R M8 × 1 REG P2

5 70 17.0 3 6.2 － － 2 ● 8M1R+1 REG+1 P3

8M0.75R M8 × 0.75 REG P2

5 70 14.0 3 6.2 － － 2 ● 8M0.75R+1 REG+1 P3

9M1.25R M9 × 1.25 REG P3 5 72 22.0 3 7.0 － － 2 ● 9M1.25R+1 REG+ 1 P4

9M1R M9 × 1 REG P2

5 72 17.0 3 7.0 － － 2 ● 9M1R+1 REG+ 1 P3

9M0.75R M9 × 0.75 REG P2

5 72 14.0 3 7.0 － － 2 ● 9M0.75R+1 REG+ 1 P3

10M1.5R

M10 × 1.5

REG P3

10M1.5R+1 REG+1 P4 5 75 27.0 3 7.0 － － 2 ●

10M1.5R+2 REG+2 P5

10M1.25R M10 × 1.25 REG P3 5 75 22.0 3 7.0 － － 2 ● 10M1.25R+1 REG+ 1 P4

10M1R M10 × 1 REG P2

5 75 17.0 3 7.0 － － 2 ● 10M1R+1 REG+ 1 P3

10M0.75R M10 × 0.75 REG P2

5 75 14.0 3 7.0 － － 2 ● 10M0.75R+1 REG+1 P3

11M1.5R M11 × 1.5 REG P3 5 80 27.0 3 8.0 － － 2 ● 11M1.5R+1 REG+ 1 P4

11M1R M11 × 1 REG P2

5 80 17.0 3 8.0 － － 2 ● 11M1R+1 REG+ 1 P3

切削丝锥

DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

Hyper Z Point Tap

ZPO

是一种加工领域广且长寿命、偏差较小、高性能的通孔用新式通用型丝锥。

High performance taps which have long tool life and stable tapping in various cutting conditions.

New general-purpose tap series for through holes.

订货方式 编码

螺尖丝锥

ZPO

34

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

11M0.75R M11 × 0.75 REG P2

5 80 14.0 3 8.0 － － 2 ● 11M0.75R+1 REG+ 1 P3

12M1.75R

M12 × 1.75

REG P4

12M1.75R+1 REG+1 P5 5 82 32.0 3 8.5 － － 2 ●

12M1.75R+2 REG+2 P6

12M1.5R M12 × 1.5 REG P3 5 82 28.0 3 8.5 － － 2 ● 12M1.5R+1 REG+1 P4

12M1.25R M12 × 1.25 REG P3 5 82 23.0 3 8.5 － － 2 ● 12M1.25R+1 REG+ 1 P4

12M1R M12 × 1 REG P2

5 82 19.0 3 8.5 － － 2 ● 12M1R+1 REG+ 1 P3

14M2R M14 × 2 REG P4 5 88 32.0 3 10.5 － － 2 ● 14M2R+1 REG+1 P5

14M1.5R M14 × 1.5 REG P3 5 88 28.0 3 10.5 － － 2 ● 14M1.5R+1 REG+1 P4

14M1.25R M14 × 1.25 REG P3 5 88 23.0 3 10.5 － － 2 ●

14M1R M14 × 1 REG P2 5 88 19.0 3 10.5 － － 2 ●

16M2R M16 × 2 REG P4 5 95 32.0 3 12.5 － － 2 ● 16M2R+1 REG+1 P5

16M1.5R M16 × 1.5 REG P3 5 95 28.0 3 12.5 － － 2 ● 16M1.5R+1 REG+1 P4

16M1R M16 × 1 REG P2 5 95 19.0 3 12.5 － － 2 ●

18M2.5R M18 × 2.5 REG P4 5 100 37.5 3 14.0 － － 2 ● 18M2.5R+1 REG+1 P5

18M2R M18 × 2 REG P4 5 100 32.0 3 14.0 － － 2 ●

18M1.5R M18 × 1.5 REG P3 5 100 28.0 3 14.0 － － 2 ● 18M1.5R+1 REG+1 P4

18M1R M18 × 1 REG P2 5 100 19.0 3 14.0 － － 2 ●

20M2.5R M20 × 2.5 REG P4 5 105 37.5 3 15.0 － － 2 ● 20M2.5R+1 REG+1 P5

20M2R M20 × 2 REG P4 5 105 32.0 3 15.0 － － 2 ●

20M1.5R M20 × 1.5 REG P3 5 105 28.0 3 15.0 － － 2 ● 20M1.5R+1 REG+1 P4

20M1R M20 × 1 REG P2 5 105 19.0 3 15.0 － － 2 ●

22M2.5R M22 × 2.5 REG P4 5 115 37.5 3 17.0 － － 2 ● 22M2.5R+1 REG+1 P5

22M2R M22 × 2 REG P4 5 115 32.0 3 17.0 － － 2 ●

22M1.5R M22 × 1.5 REG P3 5 115 28.0 3 17.0 － － 2 ● 22M1.5R+1 REG+1 P4

22M1R M22 × 1 REG P2 5 115 19.0 3 17.0 － － 2 ●

24M3R M24 × 3 REG P4 5 120 45.0 3 19.0 － － 2 ● 24M3R+1 REG+1 P5

24M2R M24 × 2 REG P4 5 120 33.0 3 19.0 － － 2 ●

24M1.5R M24 × 1.5 REG P3 5 120 31.0 3 19.0 － － 2 ● 24M1.5R+1 REG+1 P4

24M1R M24 × 1 REG P2 5 120 20.0 3 19.0 － － 2 ●

单位 (Unit)：㎜

螺尖丝锥

ZPO

35

LIST 6856 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 DN Type Stock

3M0.5R 100

M3 × 0.5

REG P2

3M0.5R+1 100 REG+ 1 P3 5 10.0 3 4.0 18 2.4 1 ●

3M0.5R+2 100 REG+ 2 P4

3M0.35R 100 M3 × 0.35 REG P1 5 8.0 3 4.0 18 2.4 1 ● 3M0.35R+1 100 REG+ 1 P2

4M0.7R 100

M4 × 0.7

REG P2

4M0.7R+1 100 REG+ 1 P3 5 12.5 3 5.0 18 3.1 1 ●

4M0.7R+2 100 REG+ 2 P4

4M0.5R 100 M4 × 0.5 REG P2

5 10.0 3 5.0 18 3.1 1 ● 4M0.5R+1 100 REG+ 1 P3

5M0.8R 100

M5 × 0.8

REG P2

5M0.8R+1 100 REG+ 1 P3 5 14.5 3 5.5 25 4.0 1 ●

5M0.8R+2 100 REG+ 2 P4

5M0.5R 100 M5 × 0.5 REG P2

5 10.0 3 5.5 25 4.0 1 ● 5M0.5R+1 100 REG+ 1 P3

6M1R 100

M6 × 1

REG P2

5 17.0 3 6.0 28 4.8 1 ●

6M1R 150

6M1R+1 100 REG+ 1 P3 6M1R+1 150

6M1R+2 100 REG+ 2 P4 6M1R+2 150

6M0.75R 100

M6 × 0.75

REG P2

5 14.0 3 6.0 28 4.8 1 ● 6M0.75R 150

6M0.75R+1 100 REG+ 1 P3 6M0.75R+1 150

8M1.25R 100

M8 × 1.25

REG P3

5 22.0 3 6.2 － － 2 ●

8M1.25R 150

8M1.25R+1 100 REG+ 1 P4 8M1.25R+1 150

8M1.25R+2 100 REG+ 2 P5 8M1.25R+2 150

8M1R 100

M8 × 1

REG P2

5 17.0 3 6.2 － － 2 ● 8M1R 150

8M1R+1 100 REG+ 1 P3 8M1R+1 150

8M0.75R 100

M8 × 0.75

REG P2

5 14.0 3 6.2 － － 2 ● 8M0.75R 150

8M0.75R+1 100 REG+ 1 P3 8M0.75R+1 150

10M1.5R 100

M10 × 1.5

REG P3

5 27.0 3 7.0 － － 2 ●

10M1.5R 150

10M1.5R+1 100 REG+ 1 P4 10M1.5R+1 150

10M1.5R+2 100 REG+ 2 P5 10M1.5R+2 150

10M1.25R 100

M10 × 1.25

REG P3

5 22.0 3 7.0 － － 2 ● 10M1.25R 150

10M1.25R+1 100 REG+ 1 P4 10M1.25R+1 150

10M1R 100

M10 × 1

REG P2

5 17.0 3 7.0 － － 2 ● 10M1R 150

10M1R+1 100 REG+ 1 P3 10M1R+1 150

切削丝锥

DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

工具材料

HSS-E

表面处理

特殊

Hyper Z Point Tap Long Shank

当标准尺寸丝锥长度不够时，请使用本丝锥。

This tap is used when a standard Hyper Z Point Tap is too short.

长柄螺尖丝锥

ZPOL

订货方式 ZPOL 编码 × 全长

36

单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. L1 Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 DN Type Stock

10M0.75R 100

M10 × 0.75

REG P2

5 14.0 3 7.0 － － 2 ● 10M0.75R 150

10M0.75R+1 100 REG+ 1 P3 10M0.75R+1 150

12M1.75R 100

M12 × 1.75

REG P4

5 32.0 3 8.5 － － 2 ●

12M1.75R 150

12M1.75R+1 100 REG+ 1 P5 12M1.75R+1 150

12M1.75R+2 100 REG+ 2 P6 12M1.75R+2 150

12M1.5R 100

M12 × 1.5

REG P3

5 28.0 3 8.5 － － 2 ● 12M1.5R 150

12M1.5R+1 100 REG+ 1 P4 12M1.5R+1 150

12M1.25R 100

M12 × 1.25

REG P3

5 23.0 3 8.5 － － 2 ● 12M1.25R 150

12M1.25R+1 100 REG+ 1 P4 12M1.25R+1 150

12M1R 100

M12 × 1

REG P2

5 19.0 3 8.5 － － 2 ● 12M1R 150

12M1R+1 100 REG+ 1 P3 12M1R+1 150

14M2R 150 M14 × 2 REG P4

5

32.0

3 10.5 － － 2

●

14M1.5R 150 M14 × 1.5 REG P3 28.0 ●

14M1.25R 150 M14 × 1.25 REG P3 23.0 ●

14M1R 150 M14 × 1 REG P2 19.0 ●

16M2R 150 M16 × 2 REG P4

5

32.0

3 12.5 － － 2

● 16M2R 200

16M1.5R 150 M16 × 1.5 REG P3 28.0 ●

16M1R 150 M16 × 1 REG P2 19.0 ●

18M2.5R 150 M18 × 2.5 REG P4

5

37.5

3 14.0 － － 2

●

18M2R 150 M18 × 2 REG P4 32.0 ●

18M1.5R 150 M18 × 1.5 REG P3 28.0 ●

18M1R 150 M18 × 1 REG P2 19.0 ●

20M2.5R 150 M20 × 2.5 REG P4

5

37.5

3 15.0 － － 2

● 20M2.5R 200

20M2R 150 M20 × 2 REG P4 32.0 ●

20M1.5R 150 M20 × 1.5 REG P3 28.0 ●

20M1R 150 M20 × 1 REG P2 19.0 ●

22M2.5R 150 M22 × 2.5 REG P4

5

37.5

3 17.0 － － 2

●

22M2R 150 M22 × 2 REG P4 32.0 ●

22M1.5R 150 M22 × 1.5 REG P3 28.0 ●

22M1R 150 M22 × 1 REG P2 19.0 ●

24M3R 150 M24 × 3 REG P4

5

45.0

3 19.0 － － 2

● 24M3R 200

24M2R 150 M24 × 2 REG P4 33.0 ●

24M1.5R 150 M24 × 1.5 REG P3 31.0 ●

24M1R 150 M24 × 1 REG P2 20.0 ●

长柄螺尖丝锥

ZPOL

37

寿命比较

Compare machining life

972

1059

1211

某螺尖丝锥

不锈钢专用

Point tap

for stainless steel

290

加工孔数

Number of holes

400

200

600

800

1000

1200

1400

0

约1.7倍

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

Thread size

Workpiece material

Cutting speed

M3×0.5

SUS304

10m/min

螺纹深度

使用机械

水溶性切削油剂

Depth

Machine Vertical Machining center

Water-soluble cutting oil

7mm

立式加工中心

某螺尖丝锥

不锈钢专用

Point tap

for stainless steel

加工孔数

Number of holes

0

约3.1倍

切削条件

Cutting

condition

螺纹尺寸

被削材

切削速度

Thread size

Workpiece material

Cutting speed

M12×1.75

SUS304

10m/min

螺纹深度

使用机械

水溶性切削油剂

Depth

Machine Vertical Machining center

Water-soluble cutting oil

25mm

立式加工中心

To achieve an overwheliming long processing life

出色地长寿命

Stable processing with small fluctuations of tool life

寿命波动小、加工稳定

ZPO-SUS ZPO-SUS

722 694

2380

2100

1000

500

1500

2000

2500

可继续加工 Continue processing

LIST 6860 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

3M0.5R M3 × 0.5 REG P2 5 46 10.0 3 4.0 18 2.4 1 ●

3M0.35R M3 × 0.35 REG P2 5 46 8.0 3 4.0 18 2.4 1 ●

4M0.7R M4 × 0.7 REG P3 5 52 12.5 3 5.0 18 3.1 1 ●

4M0.5R M4 × 0.5 REG P2 5 52 10.0 3 5.0 18 3.1 1 ●

5M0.8R M5 × 0.8 REG P3 5 60 14.5 3 5.5 25 4.0 1 ●

5M0.5R M5 × 0.5 REG P2 5 60 10.0 3 5.5 25 4.0 1 ●

6M1R M6 × 1 REG P3 5 62 17.0 3 6.0 28 4.8 1 ●

6M0.75R M6 × 0.75 REG P3 5 62 14.0 3 6.0 28 4.8 1 ●

6M0.5R M6 × 0.5 REG P2 5 62 10.0 3 6.0 28 4.8 1 ●

8M1.25R M8 × 1.25 REG P3 5 70 22.0 3 6.2 － － 2 ●

8M1R M8 × 1 REG P3 5 70 17.0 3 6.2 － － 2 ●

8M0.75R M8 × 0.75 REG P3 5 70 14.0 3 6.2 － － 2 ●

10M1.5R M10 × 1.5 REG P3 5 75 27.0 3 7.0 － － 2 ●

10M1.25R M10 × 1.25 REG P3 5 75 22.0 3 7.0 － － 2 ●

10M1R M10 × 1 REG P3 5 75 17.0 3 7.0 － － 2 ●

10M0.75R M10 × 0.75 REG P3 5 75 14.0 3 7.0 － － 2 ●

12M1.75R M12 × 1.75 REG P4 5 82 32.0 3 8.5 － － 2 ●

12M1.5R M12 × 1.5 REG P3 5 82 28.0 3 8.5 － － 2 ●

12M1.25R M12 × 1.25 REG P3 5 82 23.0 3 8.5 － － 2 ●

12M1R M12 × 1 REG P3 5 82 19.0 3 8.5 － － 2 ●

14M2R M14 × 2 REG P4 5 88 32.0 3 10.5 － － 2 ●

14M1.5R M14 × 1.5 REG P3 5 88 28.0 3 10.5 － － 2 ●

16M2R M16 × 2 REG P4 5 95 32.0 3 12.5 － － 2 ●

16M1.5R M16 × 1.5 REG P3 5 95 28.0 3 12.5 － － 2 ●

18M2.5R M18 × 2.5 REG P4 5 100 37.5 3 14.0 － － 2 ●

18M1.5R M18 × 1.5 REG P3 5 100 28.0 3 14.0 － － 2 ●

20M2.5R M20 × 2.5 REG P4 5 105 37.5 3 15.0 － － 2 ●

20M1.5R M20 × 1.5 REG P3 5 105 28.0 3 15.0 － － 2 ●

22M2.5R M22 × 2.5 REG P4 5 115 37.5 3 17.0 － － 2 ●

22M1.5R M22 × 1.5 REG P3 5 115 28.0 3 17.0 － － 2 ●

24M3R M24 × 3 REG P4 5 120 45.0 3 19.0 － － 2 ●

24M1.5R M24 × 1.5 REG P3 5 120 31.0 3 19.0 － － 2 ●

切削丝锥

DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

工具材料

HSS-E

表面处理

特殊

Hyper Z Point Tap for Stainless Steel

是一种在不锈钢加工领域中长寿命、偏差较小、高性能的通孔用丝锥。

In stainless steel processing, high performance tap for through holes which have long tool life with small fluctuations

不锈钢用螺尖丝锥

ZPOL-SUS

订货方式 ZPO-SUS 编码

38

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size < Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage.

● ：规格 1 ～ 2 为凸顶尖 ● ：Type 1 ～ 2 with External Centre

LIST 6866 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

2M0.4R M2×0.4 REG P1 2.5 40 9.0 3 3.0 15 2.1＊ 1 ● 2M0.4R+1 REG+1 P2

2.5M0.45R M2.5×0.45 REG P1 2.5 44 10.0 3 3.0 16 2.7＊ 1 ● 2.5M0.45R+1 REG+1 P2

2.6M0.45R M2.6×0.45 REG P1 2.5 44 10.0 3 3.0 16 2.7＊ 1 ● 2.6M0.45R+1 REG+1 P2

3M0.5R M3×0.5 REG P2 2.5 46 5.0 3 4.0 18 2.4 2 ● 3M0.5R+1 REG+1 P3

3.5M0.6R M3.5×0.6 REG P2 2.5 48 6.0 3 4.0 18 2.8 2 ● 3.5M0.6R+1 REG+1 P3

4M0.7R M4×0.7 REG P2 2.5 52 7.0 3 5.0 20 3.1 2 ● 4M0.7R+1 REG+1 P3

5M0.8R M5×0.8 REG P2 2.5 60 8.0 3 5.5 22 4.0 2 ● 5M0.8R+1 REG+1 P3

6M1R M6×1 REG P2 2.5 62 12.0 3 6.0 29 4.75 2 ● 6M1R+1 REG+1 P3

6M0.75R M6×0.75 REG P2 2.5 62 9.2 3 6.0 29 5.05 2 ● 6M0.75R+1 REG+1 P3

7M1R M7×1 REG P2 2.5 65 12.0 3 6.2 29 5.75 3 ● 7M1R+1 REG+1 P3

8M1.25R M8×1.25 REG P3 2.5 70 15.4 3 6.2 33 6.55 4 ● 8M1.25R+1 REG+1 P4

8M1R

M8×1

REG P2

8M1R+1 REG+1 P3 2.5 70 12.4 3 6.2 27 6.75 4 ●

8M1R+2 REG+2 P4

10M1.5R M10×1.5 REG P3 2.5 75 18.9 3 7.0 37 8.25 4 ● 10M1.5R+1 REG+1 P4

10M1.25R M10×1.25 REG P3 2.5 75 15.7 3 7.0 33 8.55 4 ● 10M1.25R+1 REG+1 P4

10M1R

M10×1

REG P2

10M1R+1 REG+1 P3 2.5 75 12.4 3 7.0 27 8.75 4 ●

10M1R+2 REG+2 P4

12M1.75R M12×1.75 REG P3 2.5 82 22.4 3 8.5 42 9.95 4 ● 12M1.75R+1 REG+1 P4

12M1.5R M12×1.5 REG P3 2.5 82 20.9 3 8.5 40 10.25 4 ● 12M1.5R+1 REG+1 P4

12M1.25R M12×1.25 REG P3 2.5 82 17.2 3 8.5 35 10.55 4 ● 12M1.25R+1 REG+1 P4

14M2R M14×2 REG P2 2.5 88 25.9 3 10.5 46 11.65 4 ● 14M2R+2 REG+2 P4

14M1.5R M14×1.5 REG P2 2.5 88 20.9 3 10.5 40 12.25 4 ● 14M1.5R+2 REG+2 P4

16M2R M16×2 REG P2 2.5 95 25.9 3 12.5 49 13.65 4 ● 16M2R+2 REG+2 P4

16M1.5R M16×1.5 REG P2 2.5 95 20.9 3 12.5 40 14.25 4 ● 16M1.5R+2 REG+2 P4

18M2.5R M18×2.5 REG P3 2.5 100 32.6 4 14.0 55 15.15 4 ● 18M2.5R+2 REG+2 P5

18M1.5R M18×1.5 REG P2 2.5 100 20.9 4 14.0 40 16.25 4 ● 18M1.5R+2 REG+2 P4

20M2.5R M20×2.5 REG P3 2.5 105 32.6 4 15.0 55 17.15 4 ● 20M2.5R+2 REG+2 P5

20M1.5R M20×1.5 REG P2 2.5 105 20.9 4 15.0 40 18.25 4 ● 20M1.5R+2 REG+2 P4

22M2.5R M22×2.5 REG P3 2.5 115 32.6 4 17.0 55 19.15 4 ● 22M2.5R+2 REG+2 P5

22M1.5R M22×1.5 REG P2 2.5 115 20.9 4 17.0 40 20.25 4 ● 22M1.5R+2 REG+2 P4

24M3R M24×3 REG P3 2.5 120 38.8 4 19.0 63 20.65 4 ● 24M3R+2 REG+2 P5

24M1.5R M24×1.5 REG P2 2.5 120 22.4 4 19.0 50 22.25 4 ● 24M1.5R+2 REG+2 P4 DN

L2

TCL

DCONMS

L1

DRVL

DRVS

切削丝锥 THL

规格1 2

3 4

工具材料

HSS-E

螺旋角

ST Spiral Tap

螺旋丝锥

STSP

订货方式 STSP 编码

40o

39

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size < Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage.

● ：规格 1 ～ 2 为凸顶尖 ● ：Type 1 ～ 2 with External Centre

LIST 6868 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

2M0.4R M2×0.4 REG P1 5 40 9.0 2 3.0 15 2.1＊ 1 ● 2M0.4R+1 REG+1 P2

2.5M0.45R M2.5×0.45 REG P2

5 44 10.0 2 3.0 16 2.7＊ 1 ● 2.5M0.45R+1 REG+1 P3

2.6M0.45R M2.6×0.45 REG P2

5 44 10.0 2 3.0 16 2.7＊ 1 ● 2.6M0.45R+1 REG+1 P3

3M0.5R M3×0.5 REG P2

5 46 11.0 3 4.0 18 2.4 2 ● 3M0.5R+1 REG+1 P3

3.5M0.6R M3.5×0.6 REG P2

5 48 13.0 3 4.0 18 2.8 2 ● 3.5M0.6R+1 REG+1 P3

4M0.7R M4×0.7 REG P2

5 52 13.0 3 5.0 20 3.1 2 ● 4M0.7R+1 REG+1 P3

5M0.8R M5×0.8 REG P2

5 60 16.0 3 5.5 22 4.0 2 ● 5M0.8R+1 REG+1 P3

6M1R M6×1 REG P2

5 62 17.0 3 6.0 28 4.8 2 ● 6M1R+1 REG+1 P3

6M0.75R M6×0.75 REG P2

5 62 14.0 3 6.0 28 4.8 2 ● 6M0.75R+1 REG+1 P3

7M1R M7×1 REG P2

5 65 17.0 3 6.2 － － 3 ● 7M1R+1 REG+1 P3

8M1.25R M8×1.25 REG P3 5 70 22.0 3 6.2 － － 3 ● 8M1.25R+1 REG+1 P4

8M1R

M8×1

REG P2

8M1R+1 REG+1 P3 5 70 17.0 3 6.2 － － 3 ●

8M1R+2 REG+2 P4

10M1.5R M10×1.5 REG P3 5 75 27.0 3 7.0 － － 3 ● 10M1.5R+1 REG+1 P4

10M1.25R M10×1.25 REG P3 5 75 22.0 3 7.0 － － 3 ● 10M1.25R+1 REG+1 P4

10M1R

M10×1

REG P2

10M1R+1 REG+1 P3 5 75 17.0 3 7.0 － － 3 ●

10M1R+2 REG+2 P4

12M1.75R M12×1.75 REG P4 5 82 32.0 3 8.5 － － 3 ● 12M1.75R+1 REG+1 P5

12M1.5R M12×1.5 REG P3 5 82 28.0 3 8.5 － － 3 ● 12M1.5R+1 REG+1 P4

12M1.25R M12×1.25 REG P4 5 82 23.0 3 8.5 － － 3 ● 12M1.25R+1 REG+1 P5

14M2R M14×2 REG P4 5 88 32.0 3 10.5 － － 3 ● 14M2R+1 REG+1 P5

14M1.5R M14×1.5 REG P3 5 88 28.0 3 10.5 － － 3 ● 14M1.5R+1 REG+1 P4

16M2R M16×2 REG P4 5 95 32.0 3 12.5 － － 3 ● 16M2R+1 REG+1 P5

16M1.5R M16×1.5 REG P3 5 95 28.0 3 12.5 － － 3 ● 16M1.5R+1 REG+1 P4

18M2.5R M18×2.5 REG P4 5 100 37.5 3 14.0 － － 3 ● 18M2.5R+1 REG+1 P5

18M1.5R M18×1.5 REG P4 5 100 28.0 3 14.0 － － 3 ● 18M1.5R+1 REG+1 P5

20M2.5R M20×2.5 REG P4 5 105 37.5 3 15.0 － － 3 ● 20M2.5R+1 REG+1 P5

20M1.5R M20×1.5 REG P4 5 105 28.0 3 15.0 － － 3 ● 20M1.5R+1 REG+1 P5

22M2.5R M22×2.5 REG P4 5 115 37.5 3 17.0 － － 3 ● 22M2.5R+1 REG+1 P5

22M1.5R M22×1.5 REG P4 5 115 28.0 3 17.0 － － 3 ● 22M1.5R+1 REG+1 P5

24M3R M24×3 REG P4 5 120 45.0 3 19.0 － － 3 ● 24M3R+1 REG+1 P5

24M1.5R M24×1.5 REG P4 5 120 31.0 3 19.0 － － 3 ● 24M1.5R+1 REG+1 P5

切削丝锥

DN

L2

TCL

L1

DRVL

规格1 2

3

THL

DCONMS

DRVS

工具材料

HSS-E

ST Point Tap

螺尖丝锥

STPO

订货方式 STPO 编码

40

LIST 6900 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

2M0.4R

M2 × 0.4

REG P1

2.5 40 9.0 3 3.0 15 2.1＊ 2M0.4R+1 REG+1 P2 1 ●

2M0.4R+2 REG+2 P3

2.2M0.45R M2.2 × 0.45 REG P1 2.5 42 9.5 3 3.0 15 2.3＊ 1 ●

2.3M0.4R M2.3 × 0.4 REG P1 2.5 42 9.5 3 3.0 15 2.4＊ 1 ●

2.5M0.45R

M2.5 × 0.45

REG P1

2.5 44 10.0 3 3.0 16 2.7＊ 2.5M0.45R+1 REG+1 P2 1 ●

2.5M0.45R+2 REG+2 P3

2.5M0.35R M2.5 × 0.35 REG P1 2.5 44 10.0 3 3.0 16 2.7＊ 1 ●

2.6M0.45R

M2.6 × 0.45

REG P1

2.5 44 10.0 3 3.0 16 2.7＊ 2.6M0.45R+1 REG+1 P2 1 ●

2.6M0.45R+2 REG+2 P3

3M0.5R

M3 × 0.5

REG P2

3M0.5R+1 REG+1 P3 2.5 46 5.0 3 4.0 18 2.4 2 ●

3M0.5R+2 REG+2 P4

3M0.35R M3 × 0.35 REG P1 2.5 46 5.0 3 4.0 18 2.4 2 ●

3.5M0.6R

M3.5 × 0.6

REG P1

3.5M0.6R+1 REG+1 P2 2.5 48 6.0 3 4.0 18 2.8 2 ●

3.5M0.6R+2 REG+2 P3

4M0.7R

M4 × 0.7

REG P2

4M0.7R+1 REG+1 P3 2.5 52 7.0 3 5.0 20 3.1 2 ●

4M0.7R+2 REG+2 P4

4M0.5R M4 × 0.5 REG P2 2.5 52 7.0 3 5.0 20 3.1 2 ●

5M0.8R

M5 × 0.8

REG P2

5M0.8R+1 REG+1 P3 2.5 60 8.0 3 5.5 22 4.0 2 ●

5M0.8R+2 REG+2 P4

5M0.5R M5 × 0.5 REG P2 2.5 60 8.0 3 5.5 22 4.0 2 ●

6M1R

M6 × 1

REG P2

6M1R+1 REG+1 P3 2.5 62 10.0 3 6.0 25 4.8 2 ●

6M1R+2 REG+2 P4

6M0.75R

M6 × 0.75

REG P2

6M0.75R+1 REG+1 P3 2.5 62 10.0 3 6.0 25 4.8 2 ●

6M0.75R+2 REG+2 P4

6M0.5R M6 × 0.5 REG P2 2.5 62 10.0 3 6.0 25 4.8 2 ●

7M1R M7 × 1 REG P2 2.5 65 10.0 3 6.2 26 5.8 3 ●

7M0.75R M7 × 0.75 REG P2 2.5 65 10.0 3 6.2 26 5.8 3 ●

8M1.25R

M8 × 1.25

REG P3

8M1.25R+1 REG+1 P4 2.5 70 12.0 3 6.2 34 6.0 3 ●

8M1.25R+2 REG+2 P5

8M1R

M8 × 1

REG P2

8M1R+1 REG+1 P3 2.5 70 12.0 3 6.2 34 6.0 3 ●

8M1R+2 REG+2 P4

8M0.75R M8 × 0.75 REG P2 2.5 70 12.0 3 6.2 34 6.0 3 ●

8M0.5R M8 × 0.5 REG P2 2.5 70 12.0 3 6.2 34 6.0 3 ●

9M1.25R M9 × 1.25 REG P3 2.5 72 12.0 3 7.0 38 6.9 3 ●

9M1R M9 × 1 REG P2 2.5 72 12.0 3 7.0 38 6.9 3 ●

10M1.5R

M10 × 1.5

REG P3

10M1.5R+1 REG+1 P4 2.5 75 15.0 3 7.0 39 6.8 3 ●

10M1.5R+2 REG+2 P5

10M1.25R

M10 × 1.25

REG P3

10M1.25R+1 REG+1 P4 2.5 75 15.0 3 7.0 39 6.8 3 ●

10M1.25R+2 REG+2 P5

10M1R

M10 × 1

REG P2

10M1R+1 REG+1 P3 2.5 75 15.0 3 7.0 39 6.8 3 ●

10M1R+2 REG+2 P4

10M0.75R M10 × 0.75 REG P2 2.5 75 15.0 3 7.0 39 6.8 3 ●

12M1.75R

M12 × 1.75

REG P3

12M1.75R+1 REG+1 P4 2.5 82 17.0 3 8.5 43 8.3 3 ●

12M1.75R+2 REG+2 P5

12M1.5R

M12 × 1.5

REG P3

12M1.5R+1 REG+1 P4 2.5 82 17.0 3 8.5 43 8.3 3 ●

12M1.5R+2 REG+2 P5

12M1.25R

M12 × 1.25

REG P3

12M1.25R+1 REG+1 P4 2.5 82 17.0 3 8.5 43 8.3 3 ●

12M1.25R+2 REG+2 P5

12M1R M12 × 1 REG P2 2.5 82 17.0 3 8.5 43 8.3 3 ●

12M0.75R M12 × 0.75 REG P2 2.5 82 17.0 3 8.5 43 8.3 3 △

12M0.5R M12 × 0.5 REG P2 2.5 82 17.0 3 8.5 43 8.3 3 △

13M1.75R M13 × 1.75 REG P2 2.5 88 17.0 3 9.5 43 9.3 3 △ DN

L2

TCL

DCONMS

L1

DRVL DRVS

切削丝锥 THL

规格1 2

3

N Spiral Tap

表面未经处理的通用型丝锥。

N 螺旋槽丝锥

NSP

订货方式 NSP 编码

工具材料

HSS-E

螺旋角

40o

41

● ：标准在库品 Stocked items

△ ：受注生产品 Manufactured upon request

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size ＜ Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage.

单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

14M2R M14 × 2 REG P2 2.5 88 20.0 3 10.5 44 10.3 3 ●

14M1.5R M14 × 1.5 REG P2 2.5 88 20.0 3 10.5 44 10.3 3 ●

14M1.25R M14 × 1.25 REG P2 2.5 88 20.0 3 10.5 44 10.3 3 ●

14M1R M14 × 1 REG P2 2.5 88 20.0 3 10.5 44 10.3 3 ●

15M2R M15 × 2 REG P2 2.5 90 20.0 3 10.5 47 10.3 3 △

15M1.5R M15 × 1.5 REG P2 2.5 90 20.0 3 10.5 47 10.3 3 ●

16M2R M16 × 2 REG P2 2.5 95 20.0 3 12.5 50 12.3 3 ●

16M1.5R M16 × 1.5 REG P2 2.5 95 20.0 3 12.5 50 12.3 3 ●

16M1R M16 × 1 REG P2 2.5 95 20.0 3 12.5 50 12.3 3 ●

18M2.5R M18 × 2.5 REG P3 2.5 100 25.0 3 14.0 56 13.8 3 ●

18M2R M18 × 2 REG P3 2.5 100 25.0 3 14.0 56 13.8 3 ●

18M1.5R M18 × 1.5 REG P2 2.5 100 25.0 3 14.0 56 13.8 3 ●

19M2.5R M19 × 2.5 REG P3 2.5 105 25.0 3 14.0 56 13.8 3 △

19M1.5R M19 × 1.5 REG P2 2.5 105 25.0 3 14.0 56 13.8 3 △

19M1R M19 × 1 REG P2 2.5 105 25.0 3 14.0 56 13.8 3 △

20M2.5R M20 × 2.5 REG P3 2.5 105 25.0 4 15.0 57 14.8 3 ●

20M2R M20 × 2 REG P3 2.5 105 25.0 4 15.0 57 14.8 3 ●

20M1.5R M20 × 1.5 REG P2 2.5 105 25.0 4 15.0 57 14.8 3 ●

22M2.5R M22 × 2.5 REG P3 2.5 115 25.0 4 17.0 62 16.8 3 ●

22M2R M22 × 2 REG P3 2.5 115 25.0 4 17.0 62 16.8 3 ●

22M1.5R M22 × 1.5 REG P2 2.5 115 25.0 4 17.0 62 16.8 3 ●

22M1R M22 × 1 REG P2 2.5 115 25.0 4 17.0 62 16.8 3 ●

23M2.5R M23 × 2.5 REG P3 2.5 120 25.0 4 18.0 67 17.8 3 △

23M2R M23 × 2 REG P3 2.5 120 25.0 4 18.0 67 17.8 3 △

24M3R M24 × 3 REG P3 2.5 120 30.0 4 19.0 67 18.8 3 ●

24M2R M24 × 2 REG P3 2.5 120 30.0 4 19.0 67 18.8 3 ●

24M1.5R M24 × 1.5 REG P2 2.5 120 30.0 4 19.0 67 18.8 3 ●

24M1R M24 × 1 REG P2 2.5 120 30.0 4 19.0 67 18.8 3 ●

25M3R M25 × 3 REG P3 2.5 125 30.0 4 19.0 67 18.8 3 △

25M1.5R M25 × 1.5 REG P2 2.5 125 30.0 4 19.0 67 18.8 3 ●

26M3R M26 × 3 REG P3 2.5 125 30.0 4 20.0 67 19.7 3 △

26M1.5R M26 × 1.5 REG P2 2.5 125 30.0 4 20.0 67 19.7 3 ●

27M3R M27 × 3 REG P3 2.5 130 30.0 4 20.0 67 19.7 3 ●

27M2R M27 × 2 REG P3 2.5 130 30.0 4 20.0 67 19.7 3 ●

27M1.5R M27 × 1.5 REG P2 2.5 130 30.0 4 20.0 67 19.7 3 ●

28M3R M28 × 3 REG P3 2.5 130 30.0 4 21.0 67 20.7 3 △

28M2R M28 × 2 REG P3 2.5 130 30.0 4 21.0 67 20.7 3 ●

28M1.5R M28 × 1.5 REG P2 2.5 130 30.0 4 21.0 67 20.7 3 ●

30M3.5R M30 × 3.5 REG P3 2.5 135 35.0 4 23.0 72 22.7 3 ●

30M3R M30 × 3 REG P3 2.5 135 30.0 4 23.0 72 22.7 3 ●

30M2R M30 × 2 REG P3 2.5 135 30.0 4 23.0 72 22.7 3 ●

30M1.5R M30 × 1.5 REG P2 2.5 135 30.0 4 23.0 72 22.7 3 ●

32M1.5R M32 × 1.5 REG P3 2.5 145 30.0 4 24.0 72 23.7 3 ●

33M3.5R M33 × 3.5 REG P3 2.5 145 35.0 4 25.0 77 24.7 3 ●

33M2R M33 × 2 REG P3 2.5 145 30.0 4 25.0 77 24.7 3 ●

33M1.5R M33 × 1.5 REG P3 2.5 145 30.0 4 25.0 77 24.7 3 ●

35M1.5R M35 × 1.5 REG P3 2.5 155 30.0 4 26.0 77 25.7 3 ●

36M4R M36 × 4 REG P4 2.5 155 40.0 4 28.0 82 27.7 3 ●

36M3R M36 × 3 REG P4 2.5 155 30.0 4 28.0 82 27.7 3 ●

36M2R M36 × 2 REG P3 2.5 155 30.0 4 28.0 82 27.7 3 ●

36M1.5R M36 × 1.5 REG P3 2.5 155 30.0 4 28.0 82 27.7 3 ●

N 螺旋槽丝锥

NSP

42

LIST 6902 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

3M0.5R 100

3M0.5R 120 M3 × 0.5 REG P2 2.5 5.0 3 4.0 18.0 1 ●

3M0.5R 150

4M0.7R 100

4M0.7R 120 M4 × 0.7 REG P2 2.5 7.0 3 5.0 20.0 1 ●

4M0.7R 150

5M0.8R 100

5M0.8R 120 M5 × 0.8 REG P2 2.5 8.0 3 5.5 22.0 1 ●

5M0.8R 150

6M1R 100

6M1R 120 M6 × 1 REG P2 2.5 7.0 3 6.0 31.0 1 ●

6M1R 150

8M1.25R 100

8M1.25R 120 M8 × 1.25 REG P3 2.5 8.8 3 6.2 30.0 2 ●

8M1.25R 150

10M1.5R 100

10M1.5R 120 M10 × 1.5 REG P3 2.5 10.5 3 7.0 31.4 2 ●

10M1.5R 150

10M1.25R 100

10M1.25R 120 M10 × 1.25 REG P3 2.5 10.5 3 7.0 31.4 2 ●

10M1.25R 150

12M1.75R 150 M12 × 1.75 REG P3 2.5 12.3 3 8.5 38.0 2 ● 12M1.75R 200

12M1.5R 150 M12 × 1.5 REG P3 2.5 12.3 3 8.5 38.0 2 ●

12M1.25R 150 M12 × 1.25 REG P3 2.5 12.3 3 8.5 38.0 2 ●

14M2R 150 M14 × 2 REG P2 2.5 14.0 3 10.5 42.0 2 ● 14M2R 200

14M1.5R 150 M14 × 1.5 REG P2 2.5 14.0 3 10.5 42.0 2 ●

16M2R 150 M16 × 2 REG P2 2.5 14.0 3 12.5 45.0 2 ● 16M2R 200

16M1.5R 150 M16 × 1.5 REG P2 2.5 14.0 3 12.5 45.0 2 ● 16M1.5R 200

18M2.5R 150 M18 × 2.5 REG P3 2.5 17.5 3 14.0 48.0 2 ● 18M2.5R 200

18M1.5R 150 M18 × 1.5 REG P2 2.5 17.5 3 14.0 48.0 2 ● 18M1.5R 200

20M2.5R 150 M20 × 2.5 REG P3 2.5 17.5 4 15.0 50.0 2 ● 20M2.5R 200

20M1.5R 150 M20 × 1.5 REG P2 2.5 17.5 4 15.0 50.0 2 ● 20M1.5R 200

22M2.5R 200 M22 × 2.5 REG P3 2.5 17.5 4 17.0 55.0 2 ●

22M1.5R 150 M22 × 1.5 REG P2 2.5 17.5 4 17.0 55.0 2 ● 22M1.5R 200

24M3R 150 M24 × 3 REG P3 2.5 21.0 4 19.0 58.0 2 ● 24M3R 200

24M1.5R 150 M24 × 1.5 REG P2 2.5 21.0 4 19.0 58.0 2 ● 24M1.5R 200

L2

TCL

DCONMS

L1

DRVL DRVS

THL

2

切削丝锥

规格1

N Spiral Tap Long Shank

当标准尺寸丝锥长度不够时，请使用本丝锥。

N 长柄螺旋槽丝锥

NSPL

订货方式 NSPL 编码 × 全长

工具材料

HSS-E

螺旋角

40o

This tap is used when a standard N Spiral Tap is too short.

43

LIST 6906 单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

1.4M0.3R

M1.4 × 0.3

REG P1

5 34 7.0 2 3.0 11 1.5＊ 1.4M0.3R+1 REG+1 P2 1 ●

1.4M0.3R+2 REG+2 P3

1.6M0.35R

M1.6 × 0.35

REG P1

5 36 8.0 2 3.0 13 1.7＊ 1.6M0.35R+1 REG+1 P2 1 ●

1.6M0.35R+2 REG+2 P3

1.7M0.35R

M1.7 × 0.35

REG P1

5 36 8.0 2 3.0 13 1.8＊ 1.7M0.35R+1 REG+1 P2 1 ●

1.7M0.35R+2 REG+2 P3

2M0.4R

M2 × 0.4

REG P1

5 40 9.0 2 3.0 15 2.1＊ 2M0.4R+1 REG+1 P2 1 ●

2M0.4R+2 REG+2 P3

2.2M0.45R M2.2 × 0.45 REG P2 5 42 9.5 2 3.0 15 2.3＊ 1 ●

2.3M0.4R

M2.3 × 0.4

REG P1

5 42 9.5 2 3.0 15 2.4＊ 2.3M0.4R+1 REG+1 P2 1 ●

2.3M0.4R+2 REG+2 P3

2.5M0.45R

M2.5 × 0.45

REG P2

5 44 10.0 2 3.0 16 2.7＊ 2.5M0.45R+1 REG+1 P3 1 ●

2.5M0.45R+2 REG+2 P4

2.6M0.45R

M2.6 × 0.45

REG P2

5 44 10.0 2 3.0 16 2.7＊ 2.6M0.45R+1 REG+1 P3 1 ●

2.6M0.45R+2 REG+2 P4

3M0.5R

M3 × 0.5

REG P2

3M0.5R+1 REG+1 P3 5 46 11.0 3 4.0 18 2.4 2 ●

3M0.5R+2 REG+2 P4

3.5M0.6R

M3.5 × 0.6

REG P2

3.5M0.6R+1 REG+1 P3 5 48 13.0 3 4.0 18 2.8 2 ●

3.5M0.6R+2 REG+2 P4

4M0.7R

M4 × 0.7

REG P2

4M0.7R+1 REG+1 P3 5 52 13.0 3 5.0 20 3.1 2 ●

4M0.7R+2 REG+2 P4

4M0.5R M4 × 0.5 REG P2 5 52 13.0 3 5.0 20 3.1 2 ●

5M0.8R

M5 × 0.8

REG P2

5M0.8R+1 REG+1 P3 5 60 16.0 3 5.5 22 4.0 2 ●

5M0.8R+2 REG+2 P4

6M1R

M6 × 1

REG P2

6M1R+1 REG+1 P3 5 62 19.0 3 6.0 27 4.8 ２ ●

6M1R+2 REG+2 P4

6M0.75R

M6 × 0.75

REG P2

6M0.75R+1 REG+1 P3 5 62 19.0 3 6.0 27 4.8 ２ ●

6M0.75R+2 REG+2 P4

8M1.25R

M8 × 1.25

REG P3

8M1.25R+1 REG+1 P4 5 70 22.0 3 6.2 34 6.0 ３ ●

8M1.25R+2 REG+2 P5

8M1R

M8 × 1

REG P2

8M1R+1 REG+1 P3 5 70 22.0 3 6.2 34 6.0 ３ ●

8M1R+2 REG+2 P4

10M1.5R

M10 × 1.5

REG P3

10M1.5R+1 REG+1 P4 5 75 24.0 3 7.0 39 6.8 ３ ●

10M1.5R+2 REG+2 P5

10M1.25R

M10 × 1.25

REG P3

10M1.25R+1 REG+1 P4 5 75 24.0 3 7.0 39 6.8 ３ ●

10M1.25R+2 REG+2 P5

10M1R

M10 × 1

REG P3

10M1R+1 REG+1 P4 5 75 24.0 3 7.0 39 6.8 ３ ●

10M1R+2 REG+2 P5

＊：螺纹直径 ＜ 颈径。内螺纹加工深度较深时，如插入的长度超过螺纹长度，则会有折断的危险。

＊：Thread Size < Neck diameter (dn) When depth of cutting a female thread is deep, if putting the screw length or more in length, there is a risk of breakage. DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

2

3 4

切削丝锥

规格1

N Point Tap

表面未经处理的通用型丝锥。

N 螺尖丝锥

NPO

订货方式 NPO 编码

工具材料

HSS-E

This non-coarted point tap is used universally.

44

单位 (Unit)：㎜

编码 螺纹尺寸 等级 切削锥部（P） 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TAP Limit TCL (P) L1 THL NOF DCONMS L2 DN Type Stock

12M1.75R

M12 × 1.75

REG P4

12M1.75R+1 REG+1 P5 5 82 29.0 3 8.5 43 8.3 4 ●

12M1.75R+2 REG+2 P6

12M1.5R

M12 × 1.5

REG P3

12M1.5R+1 REG+1 P4 5 82 29.0 3 8.5 43 8.3 4 ●

12M1.5R+2 REG+2 P5

12M1.25R

M12 × 1.25

REG P4

12M1.25R+1 REG+1 P5 5 82 29.0 3 8.5 43 8.3 4 ●

12M1.25R+2 REG+2 P6

12M1R

M12 × 1

REG P3

12M1R+1 REG+1 P4 5 82 29.0 3 8.5 43 8.3 4 ●

12M1R+2 REG+2 P5

14M2R M14 × 2 REG P4 5 88 30.0 3 10.5 49 10.3 4 ●

14M1.5R M14 × 1.5 REG P3 5 88 30.0 3 10.5 49 10.3 4 ●

14M1R M14 × 1 REG P3 5 88 30.0 3 10.5 49 10.3 4 ●

16M2R M16 × 2 REG P4 5 95 32.0 3 12.5 52 12.3 4 ●

16M1.5R M16 × 1.5 REG P3 5 95 32.0 3 12.5 52 12.3 4 ●

18M2.5R M18 × 2.5 REG P4 5 100 37.0 3 14.0 56 13.8 4 ●

18M1.5R M18 × 1.5 REG P4 5 100 37.0 3 14.0 56 13.8 4 ●

18M1R M18 × 1 REG P3 5 100 37.0 3 14.0 56 13.8 4 ●

20M2.5R M20 × 2.5 REG P4 5 105 37.0 3 15.0 57 14.8 4 ●

20M1.5R M20 × 1.5 REG P4 5 105 37.0 3 15.0 57 14.8 4 ●

20M1R M20 × 1 REG P3 5 105 37.0 3 15.0 57 14.8 4 ●

22M2.5R M22 × 2.5 REG P4 5 115 38.0 3 17.0 62 16.8 4 ●

22M1.5R M22 × 1.5 REG P4 5 115 38.0 3 17.0 62 16.8 4 ●

24M3R M24 × 3 REG P4 5 120 45.0 3 19.0 67 18.8 4 ●

24M2R M24 × 2 REG P4 5 120 45.0 3 19.0 67 18.8 4 ●

24M1.5R M24 × 1.5 REG P4 5 120 45.0 3 19.0 67 18.8 4 ●

25M1.5R M25 × 1.5 REG P4 5 125 45.0 3 19.0 67 18.8 4 ●

26M1.5R M26 × 1.5 REG P4 5 125 45.0 4 20.0 67 19.7 4 ●

27M3R M27 × 3 REG P4 5 130 45.0 4 20.0 67 19.7 4 ●

27M1.5R M27 × 1.5 REG P4 5 130 45.0 4 20.0 67 19.7 4 ●

30M3.5R M30 × 3.5 REG P5 5 135 48.0 4 23.0 72 22.7 4 ●

30M3R M30 × 3 REG P4 5 135 48.0 4 23.0 72 22.7 4 ●

30M2R M30 × 2 REG P4 5 135 48.0 4 23.0 72 22.7 4 ●

30M1.5R M30 × 1.5 REG P4 5 135 48.0 4 23.0 72 22.7 4 ●

30M1R M30 × 1 REG P2 5 135 48.0 4 23.0 72 22.7 4 ●

32M1.5R M32 × 1.5 REG P4 5 145 51.0 4 24.0 72 23.7 4 ●

33M3.5R M33 × 3.5 REG P5 5 145 51.0 4 25.0 77 24.7 4 ●

33M2R M33 × 2 REG P3 5 145 51.0 4 25.0 77 24.7 4 ●

33M1.5R M33 × 1.5 REG P4 5 145 51.0 4 25.0 77 24.7 4 ●

35M1.5R M35 × 1.5 REG P4 5 155 51.0 4 26.0 77 25.7 4 ●

36M4R M36 × 4 REG P5 5 155 57.0 4 28.0 82 27.7 4 ●

36M3R M36 × 3 REG P4 5 155 57.0 4 28.0 82 27.7 4 ●

36M2R M36 × 2 REG P3 5 155 57.0 4 28.0 82 27.7 4 ●

36M1.5R M36 × 1.5 REG P4 5 155 57.0 4 28.0 82 27.7 4 ●

N 螺尖丝锥

NPO

45

N Point Tap Long Shank

LIST 6908 单位 (Unit)：㎜

编码 全长 螺纹尺寸 等级 切削锥部（P） 螺纹长度 沟槽数 柄径 颈长 规格 库存

Code No. L Thread Size TAP Limit TCL (P) THL NOF DCONMS L2 Type Stock

3M0.5R 100

3M0.5R 120 M3 × 0.5 REG P2 5 11 3 4.0 18 1 ●

3M0.5R 150

4M0.7R 100

4M0.7R 120 M4 × 0.7 REG P2 5 13 3 5.0 20 1 ●

4M0.7R 150

5M0.8R 100

5M0.8R 120 M5 × 0.8 REG P2 5 16 3 5.5 22 1 ●

5M0.8R 150

6M1R 100

6M1R 120 M6 × 1 REG P2 5 19 3 6.0 27 1 ●

6M1R 150

8M1.25R 100

8M1.25R 120 M8 × 1.25 REG P3 5 22 3 6.2 34 2 ●

8M1.25R 150

10M1.5R 100

10M1.5R 120 M10 × 1.5 REG P3 5 24 3 7.0 39 2 ●

10M1.5R 150

10M1.25R 100

10M1.25R 120 M10 × 1.25 REG P3 5 24 3 7.0 39 2 ●

10M1.25R 150

12M1.75R 150 M12 × 1.75 REG P3 5 29 3 8.5 45 3 ● 12M1.75R 200

12M1.5R 150 M12 × 1.5 REG P3 5 29 3 8.5 45 3 ●

12M1.25R 150 M12 × 1.25 REG P3 5 29 3 8.5 45 3 ●

14M2R 150 M14 × 2 REG P2 5 30 3 10.5 49 3 ● 14M2R 200

14M1.5R 150 M14 × 1.5 REG P2 5 30 3 10.5 49 3 ●

16M2R 150 M16 × 2 REG P2 5 32 3 12.5 52 3 ● 16M2R 200

16M1.5R 150 M16 × 1.5 REG P2 5 32 3 12.5 52 3 ● 16M1.5R 200

18M2.5R 150 M18 × 2.5 REG P3 5 37 3 14.0 56 3 ● 18M2.5R 200

18M1.5R 150 M18 × 1.5 REG P2 5 37 3 14.0 56 3 ● 18M1.5R 200

20M2.5R 150 M20 × 2.5 REG P3 5 37 3 15.0 57 3 ● 20M2.5R 200

20M1.5R 150 M20 × 1.5 REG P2 5 37 3 15.0 57 3 ● 20M1.5R 200

22M2.5R 200 M22 × 2.5 REG P3 5 38 3 17.0 62 3 ●

22M1.5R 150 M22 × 1.5 REG P2 5 38 3 17.0 62 3 ● 22M1.5R 200

24M3R 150 M24 × 3 REG P3 5 45 3 19.0 67 3 ● 24M3R 200

24M1.5R 150 M24 × 1.5 REG P2 5 45 3 19.0 67 3 ● 24M1.5R 200

L2

TCL

DCONMS

L1

DRVL DRVS

THL

规格1 2

3

当标准尺寸丝锥长度不够时，请使用本丝锥。 切削丝锥

N 长柄螺尖丝锥

NPOL

订货方式 NPOL 编码 × 全长

工具材料

HSS-E

This tap is used when a standard N Point Tap is too short.

46

切削丝锥

带油孔

ESP

EXCEL 螺旋丝锥

本品选用超硬型母材在铝、铸铁等材料螺丝时可实现其长寿命。

This tap made of carbide is suitable for long life tapping of Alminum, Cast Iron.

ESP

EXCEL Spiral Tap

规格1 2

φ dn

Ln

Lc

φ Ds

L

Lk K

ℓ

涂 层

TICN工具材料

超硬螺旋角

15

订货方式 编码

LIST 9238 单位 (Unit)：㎜

编码 螺纹尺寸 切削锥部（P） 等级 全长 螺纹长度 沟槽数 柄径 颈长 颈径 规格 库存

Code No. Thread Size TCL (P) TAP Limit L1 THL NOF DCONMS L2 DN Type Stock

4M0.7 M4 × 0.7 2.5 GT5 52 7 3 5.0 20 3.1 1 ●

5M0.8 M5 × 0.8 2.5 GT5 60 8 3 5.5 22 3.9 1 ●

6M1 M6 × 1 2.5 GT5 62 10 3 6.0 25 4.7 1 ●

8M1.25 M8 × 1.25 2.5 GT6 70 13 3 6.2 － － 2 ●

10M1.5 M10 × 1.5 2.5 GT6 75 15 3 7.0 － － 2 ●

12M1.75 M12 × 1.75 2.5 GT7 82 18 3 8.5 － － 2 ●

LIST 9236 单位 (Unit)：㎜

编码 切削锥部（P） 螺纹尺寸 等级 全长 螺纹长度 沟槽数 柄径 规格 库存

Code No. TCL (P) Thread Size TAP Limit L1 THL NOF DCONMS Type Stock

3M0.5 3 M3 × 0.5 GT5 46 11 3 4.0 1 ● 3M0.5 1.5

4M0.7 3 M4 × 0.7 GT5 52 13 3 5.0 1 ● 4M0.7 1.5

5M0.8 3 M5 × 0.8 GT5 60 16 3 5.5 1 ● 5M0.8 1.5

6M1 3 M6 × 1 GT5 62 19 3 6.0 2 ● 6M1 1.5

8M1.25 3 M8 × 1.25 GT6 70 22 3 6.2 3 ● 8M1.25 1.5

10M1.5 3 M10 × 1.5 GT6 75 24 3 7.0 3 ● 10M1.5 1.5

12M1.75 3 M12 × 1.75 GT7 82 29 4 8.5 3 ● 12M1.75 1.5

切削丝锥

带油孔

规格1 2 DN

L2

TCL

DCONMS

L1

DRVL DRVS

THL

切削丝锥

规格1 2

3

TCL

DCONMS

L1

DRVL DRVS

THL

DN

L2

涂层