该页无缩略图
锂电分切刀产品 Lithium battery cutter blank
GB103
牌号介绍Grade Introduction
| 牌号Grade | Co% | HRA | $\underset { \mathrm { g / c m } ^ { 3 } } { \mathsf { D } }$ | $\overset { \top } { \operatorname { N } } / \overset { \kappa \varsigma } { m } 2$ | Grain Size |
| GB121 | 12.0-13.0 | 92.2-93.0 | 14.00-14.20 | 4200 | Ultra Fine |
| GB103 | 10.0-11.0 | 91.3-92.1 | 14.30-14.50 | 3500 | Submicron |
锂电池极片分切刀规格表 Lithium battery electrode cutter specification
| 规格Spec. | 外径(φD) mm | 内孔(φd) mm | 厚度(h) mm |
| Φ80*Φ30*0.3 | 80 | 30 | 0.3 |
| 上刀Upper cutterΦ98*Φ66*0.7 | 98 | 66 | 0.7 |
| 上刀Upper cutterΦ100*Φ65*0.7 | 100 | 65 | 0.7 |
| 下刀Lower cutterφ100*Φ65*2.0 | 100 | 65 | 2.0 |
| 上刀Upper cutterφ100*Φ65*1.0 | 100 | 65 | 1.0 |
| 下刀Lower cutterΦ100*Φ65*3.0 | 100 | 65 | 3.0 |
| 上刀Upper cutterΦ130*Φ88*1.0 | 130 | 88 | 1.0 |
| 下刀Lower cutterφ130*Φ70*3.0 | 130 | 70 | 3.0 |
| 上刀Upper cutterΦ130*Φ97*0.8 | 130 | 97 | 0.8 |
| 下刀Lower cutterΦ130*Φ95*4.0 | 130 | 95 | 4.0 |
Note: The above specifications are finished sizes, blank size is customized according to requirement.
高品质保证 Quality Assurance
先进的生产技术和国际一流的生产线。
Equipped with advanced production technology and world-leading production lines.
合金耐磨性、耐热性及耐腐蚀性好，广泛应用于锂电分切刀领域。
The cemented carbide has good wear resistance, heat resistance and corrosion resistance. It is used wildly in lithium battery cutter.
金鹭公司已获得由DNVGL认证的ISO9001:2015质量管理体系认证证书及CQC认证的ISO14001环境管理体系认证证书。 GESAC has obtained the ISO9001:2015 quality management system certified by DNVGL and ISO14001 environmental management system by CQC.
YYXTC
厦门金鹭特种合金有限公司
地址：中国厦门市湖里区兴隆路69号
工厂地址：中国福建省厦门市集美北部工业区天阳路52-60号
电话：+86-592-6023661
传真：+86-592-6106023
邮编：361021
电邮：gesac@cxtc.com
网址://www.gesac.com.cn
XIAMEN GOLDEN EGRET SPECIAL ALLOY CO.,LTD.
Add.:No.69 Xinglong Road Huli Xiamen China
Factory Add.: No.52-60,Tianyang Road,Jimei,
Xiamen,Fujian,China.
Tel:+86-592-6023661
Fax：+86-592-6106023
P.C.:361021
Email: gesac@cxtc.com
Http://www.gesac.com.cn
BSC202206a
