该页无缩略图
HSK50E-SR热胀刀柄(厚壁型)HSK50E-SR Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK50E-SR03-80 | 3 | 10 | 17 | 80 | 1 | 1 | 4.5° | |
| HSK50E-SR04-60 | 4 | 15 | 20 | 60 | 1 | 1 | 4.5° | |
| HSK50E-SR04-80 | 4 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK50E-SR04-120 | 4 | 15 | 20 | 120 | 1 | 1 | 4.5° | |
| HSK50E-SR04-160 | 4 | 15 | 25 | 160 | 1 | 1 | 4.5° | |
| HSK50E-SR05-80 | 5 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK50E-SR05-120 | 5 | 15 | 20 | 120 | 1 | 1 | 4.5° | |
| HSK50E-SR05-160 | 5 | 15 | 25 | 160 | 1 | 1 | 4.5° | |
| HSK50E-SR06-80 | 6 | 21 | 27 | 80 | 1 | 1 | 4.5° | |
| HSK50E-SR06-120 | 6 | 21 | 27 | 120 | 1 | 1 | 4.5° | |
| HSK50E-SR06-160 | 6 | 21 | 32 | 160 | 1 | 1 | 4.5° | |
| HSK50E-SR08-80 | 8 | 21 | 27 | 80 | 45 | 18 | 4.5° | |
| HSK50E-SR08-120 | 8 | 21 | 27 | 120 | 45 | 18 | 4.5° | |
| HSK50E-SR08-160 | 8 | 21 | 32 | 160 | 45 | 18 | 4.5° | |
| HSK50E-SR10-85 | 10 | 24 | 32 | 85 | 52 | 20 | 4.5° | |
| HSK50E-SR10-120 | 10 | 24 | 32 | 120 | 52 | 20 | 4.5° | |
| HSK50E-SR10-160 | 10 | 24 | 34 | 160 | 52 | 20 | 4.5° | |
| HSK50E-SR12-90 | 12 | 24 | 32 | 90 | 60 | 28 | 4.5° | |
| HSK50E-SR12-120 | 12 | 24 | 32 | 120 | 60 | 28 | 4.5° | |
| HSK50E-SR12-160 | 12 | 24 | 34 | 160 | 60 | 28 | 4.5° | |
| HSK50E-SR14-90 | 14 | 27 | 34 | 90 | 60 | 24 | 4.5° | |
| HSK50E-SR14-120 | 14 | 27 | 34 | 120 | 60 | 24 | 4.5° | |
| HSK50E-SR14-160 | 14 | 27 | 34 | 160 | 60 | 24 | 4.5° | |
| HSK50E-SR16-95 | 16 | 27 | 34 | 95 | 65 | 25 | 4.5° | |
| HSK50E-SR16-120 | 16 | 27 | 34 | 120 | 65 | 25 | 4.5° | |
| HSK50E-SR16-160 | 16 | 27 | 34 | 160 | 65 | 25 | 4.5° | |
| HSK50E-SR18-95 | 18 | 33 | 42 | 95 | 65 | 25 | 4.5° | |
| HSK50E-SR20-100 | 20 | 33 | 42 | 100 | 65 | 25 | 4.5° |
HSK50E-SRS热胀刀柄(薄壁型)HSK50E-SRS Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK50E-SRS03-70 | 3 | 8 | 11 | 70 | 1 | 1 | 3° | |
| HSK50E-SRS03-100 | 3 | 8 | 15 | 100 | 1 | 1 | 3° | |
| HSK50E-SRS04-60 | 4 | 10 | 13 | 60 | 1 | 1 | 3° | |
| HSK50E-SRS04-80 | 4 | 10 | 15 | 80 | 1 | 1 | 3° | |
| HSK50E-SRS04-120 | 4 | 10 | 19 | 120 | 1 | 1 | 3° | |
| HSK50E-SRS04-160 | 4 | 10 | 23 | 160 | 1 | 1 | 3° | |
| HSK50E-SRS06-80 | 6 | 12 | 17 | 80 | 1 | 1 | 3° | |
| HSK50E-SRS06-120 | 6 | 12 | 21 | 120 | 1 | 1 | 3° | |
| HSK50E-SRS06-160 | 6 | 12 | 25 | 160 | 1 | 1 | 3° | |
| HSK50E-SRS08-80 | 8 | 14 | 19 | 80 | 45 | 18 | 3° | |
| HSK50E-SRS08-120 | 8 | 14 | 23 | 120 | 45 | 18 | 3° | |
| HSK50E-SRS08-160 | 8 | 14 | 27 | 160 | 45 | 18 | 3° | |
| HSK50E-SRS10-85 | 10 | 16 | 22 | 85 | 52 | 20 | 3° | |
| HSK50E-SRS10-120 | 10 | 16 | 25 | 120 | 52 | 20 | 3° | |
| HSK50E-SRS10-160 | 10 | 16 | 29 | 160 | 52 | 20 | 3° | |
| HSK50E-SRS12-90 | 12 | 18 | 24 | 90 | 60 | 28 | 3° | |
| HSK50E-SRS12-120 | 12 | 18 | 27 | 120 | 60 | 28 | 3° | |
| HSK50E-SRS12-160 | 12 | 18 | 31 | 160 | 60 | 28 | 3° |
HSK50A-SR热胀刀柄(厚壁型)HSK50A-SR Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK50A-SR03-80 | 3 | 10 | 17 | 80 | 1 | 1 | 4.5° | |
| HSK50A-SR04-80 | 4 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK50A-SR04-120 | 4 | 15 | 20 | 120 | 1 | 1 | 4.5° | |
| HSK50A-SR05-80 | 5 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK50A-SR06-80 | 6 | 21 | 27 | 80 | 1 | 1 | 4.5° | |
| HSK50A-SR06-120 | 6 | 21 | 27 | 120 | 1 | 1 | 4.5° | |
| HSK50A-SR08-80 | 8 | 21 | 27 | 80 | 45 | 18 | 4.5° | |
| HSK50A-SR08-120 | 8 | 21 | 27 | 120 | 45 | 18 | 4.5° | |
| HSK50A-SR10-85 | 10 | 24 | 32 | 85 | 52 | 20 | 4.5° | |
| HSK50A-SR10-120 | 10 | 24 | 32 | 120 | 52 | 20 | 4.5° | |
| HSK50A-SR12-90 | 12 | 24 | 32 | 90 | 60 | 28 | 4.5° | |
| HSK50A-SR12-120 | 12 | 24 | 32 | 120 | 60 | 28 | 4.5° | |
| HSK50A-SR14-90 | 14 | 27 | 34 | 90 | 60 | 24 | 4.5° | |
| HSK50A-SR14-120 | 14 | 27 | 34 | 120 | 60 | 24 | 4.5° | |
| HSK50A-SR16-95 | 16 | 27 | 34 | 95 | 65 | 25 | 4.5° | |
| HSK50A-SR16-120 | 16 | 27 | 34 | 120 | 65 | 25 | 4.5° | |
| HSK50A-SR18-95 | 18 | 33 | 42 | 95 | 65 | 25 | 4.5° | |
| HSK50A-SR20-100 | 20 | 33 | 42 | 100 | 65 | 25 | 4.5° |
HSK50A-SRS热胀刀柄(薄壁型)HSK50A-Hot ToolHandle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK50A-SRS04-80 | 4 | 10 | 15 | 80 | 1 | 1 | 3° | |
| HSK50A-SRS04-120 | 4 | 10 | 19 | 120 | 1 | 1 | 3° | |
| HSK50A-SRS04-160 | 4 | 10 | 23 | 160 | 1 | 1 | 3° | |
| HSK50A-SRS06-80 | 6 | 12 | 17 | 80 | 1 | 1 | 3° | |
| HSK50A-SRS06-120 | 6 | 12 | 21 | 120 | 1 | 1 | 3° | |
| HSK50A-SRS06-160 | 6 | 12 | 25 | 160 | 1 | 1 | 3° | |
| HSK50A-SRS08-80 | 8 | 14 | 19 | 80 | 45 | 18 | 3° | |
| HSK50A-SRS08-120 | 8 | 6 | 23 | 120 | 45 | 18 | 3° | |
| HSK50A-SRS08-160 | 8 | 6 | 27 | 160 | 45 | 18 | 3° | |
| HSK50A-SRS10-85 | 10 | 16 | 22 | 85 | 52 | 20 | 3° | |
| HSK50A-SRS10-120 | 10 | 16 | 25 | 120 | 52 | 20 | 3° | |
| HSK50A-SRS10-160 | 10 | 16 | 29 | 160 | 52 | 20 | 3° | |
| HSK50A-SRS12-90 | 12 | 18 | 24 | 90 | 60 | 28 | 3° | |
| HSK50A-SRS12-120 | 12 | 18 | 27 | 120 | 60 | 28 | 3° | |
| HSK50A-SRS12-160 | 12 | 18 | 31 | 160 | 60 | 28 | 3° |
HSK63A-SR热胀刀柄(厚壁型)HSK63A-SR Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK63A-SR03-80 | 3 | 10 | 17 | 80 | 1 | 1 | 4.5° | |
| HSK63A-SR04-80 | 4 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK63A-SR04-120 | 4 | 15 | 20 | 120 | 1 | 1 | 4.5° | |
| HSK63A-SR04-160 | 4 | 15 | 25 | 160 | 1 | 1 | 4.5° | |
| HSK63A-SR05-80 | 5 | 15 | 20 | 80 | 1 | 1 | 4.5° | |
| HSK63A-SR06-80 | 6 | 21 | 27 | 80 | 1 | 1 | 4.5° | |
| HSK63A-SR06-120 | 6 | 21 | 27 | 120 | 1 | 1 | 4.5° | |
| HSK63A-SR06-160 | 6 | 21 | 32 | 160 | 1 | 1 | 4.5° | |
| HSK63A-SR08-80 | 8 | 21 | 27 | 80 | 45 | 18 | 4.5° | |
| HSK63A-SR08-120 | 8 | 21 | 27 | 120 | 45 | 18 | 4.5° | |
| HSK63A-SR08-160 | 8 | 21 | 32 | 160 | 45 | 18 | 4.5° | |
| HSK63A-SR10-85 | 10 | 24 | 32 | 85 | 52 | 20 | 4.5° | |
| HSK63A-SR10-120 | 10 | 24 | 32 | 120 | 52 | 20 | 4.5° | |
| HSK63A-SR10-160 | 10 | 24 | 34 | 160 | 52 | 20 | 4.5° | |
| HSK63A-SR12-90 | 12 | 24 | 32 | 90 | 60 | 28 | 4.5° | |
| HSK63A-SR12-120 | 12 | 24 | 32 | 120 | 60 | 28 | 4.5° | |
| HSK63A-SR12-160 | 12 | 24 | 34 | 160 | 60 | 28 | 4.5° | |
| HSK63A-SR14-90 | 14 | 27 | 34 | 90 | 60 | 24 | 4.5° | |
| HSK63A-SR14-120 | 14 | 27 | 34 | 120 | 60 | 24 | 4.5° | |
| HSK63A-SR14-160 | 14 | 27 | 42 | 160 | 60 | 24 | 4.5° | |
| HSK63A-SR16-95 | 16 | 27 | 34 | 95 | 65 | 25 | 4.5° | |
| HSK63A-SR16-120 | 16 | 27 | 34 | 120 | 65 | 25 | 4.5° | |
| HSK63A-SR16-160 | 16 | 27 | 42 | 160 | 65 | 25 | 4.5° | |
| HSK63A-SR18-95 | 18 | 33 | 42 | 95 | 65 | 25 | 4.5° | |
| HSK63A-SR18-120 | 18 | 33 | 42 | 120 | 65 | 25 | 4.5° | |
| HSK63A-SR18-160 | 18 | 33 | 51 | 160 | 65 | 25 | 4.5° | |
| HSK63A-SR20-100 | 20 | 33 | 42 | 100 | 65 | 25 | 4.5° | |
| HSK63A-SR20-120 | 20 | 33 | 42 | 120 | 65 | 25 | 4.5° | |
| HSK63A-SR20-160 | 20 | 33 | 51 | 160 | 65 | 25 | 4.5° |
HSK63A-SRS热胀刀柄(薄壁型)HSK63A-SRS Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK63A-SRS03-70 | 3 | 8 | 11 | 70 | 1 | 1 | 3° | |
| HSK63A-SRS03-100 | 3 | 8 | 15 | 100 | 1 | 1 | 3° | |
| HSK63A-SRS03-130 | 3 | 8 | 18 | 130 | 1 | 1 | 3° | |
| HSK63A-SRS04-80 | 4 | 10 | 15 | 80 | 1 | 1 | 3° | |
| HSK63A-SRS04-120 | 4 | 10 | 19 | 120 | 1 | 1 | 3° | |
| HSK63A-SRS04-160 | 4 | 10 | 24 | 160 | 1 | 1 | 3° | |
| HSK63A-SRS06-80 | 6 | 12 | 17 | 80 | 1 | 1 | 3° | |
| HSK63A-SRS06-120 | 6 | 12 | 21 | 120 | 1 | 1 | 3° | |
| HSK63A-SRS06-160 | 6 | 12 | 26 | 160 | 1 | 1 | 3° | |
| HSK63A-SRS08-80 | 8 | 14 | 19 | 80 | 45 | 18 | 3° | |
| HSK63A-SRS08-120 | 8 | 14 | 23 | 120 | 45 | 18 | 3° | |
| HSK63A-SRS08-160 | 8 | 14 | 28 | 160 | 45 | 18 | 3° | |
| HSK63A-SRS10-85 | 10 | 16 | 22 | 85 | 52 | 20 | 3° | |
| HSK63A-SRS10-120 | 10 | 16 | 25 | 120 | 52 | 20 | 3° | |
| HSK63A-SRS10-160 | 10 | 16 | 30 | 160 | 52 | 20 | 3° | |
| HSK63A-SRS12-90 | 12 | 18 | 24 | 90 | 60 | 28 | 3° | |
| HSK63A-SRS12-120 | 12 | 18 | 27 | 120 | 60 | 28 | 3° | |
| HSK63A-SRS12-160 | 12 | 18 | 32 | 160 | 60 | 28 | 3° |
HSK100A-SR热胀刀柄(厚壁型)HSK100A-SR Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | N | A | 备注Note |
| HSK100A-SR06-85 | 6 | 21 | 27 | 85 | 1 | 1 | 4.5° | |
| HSK100A-SR06-120 | 6 | 21 | 27 | 120 | 1 | 1 | 4.5° | |
| HSK100A-SR06-160 | 6 | 21 | 32 | 160 | 1 | 1 | 4.5° | |
| HSK100A-SR08-85 | 8 | 21 | 27 | 85 | 45 | 18 | 4.5° | |
| HSK100A-SR08-120 | 8 | 21 | 27 | 120 | 45 | 18 | 4.5° | |
| HSK100A-SR08-160 | 8 | 21 | 32 | 160 | 45 | 18 | 4.5° | |
| HSK100A-SR10-90 | 10 | 24 | 32 | 90 | 52 | 20 | 4.5° | |
| HSK100A-SR10-120 | 10 | 24 | 32 | 120 | 52 | 20 | 4.5° | |
| HSK100A-SR10-160 | 10 | 24 | 34 | 160 | 52 | 20 | 4.5° | |
| HSK100A-SR12-95 | 12 | 24 | 32 | 95 | 60 | 28 | 4.5° | |
| HSK100A-SR12-120 | 12 | 24 | 32 | 120 | 60 | 28 | 4.5° | |
| HSK100A-SR12-160 | 12 | 24 | 34 | 160 | 60 | 28 | 4.5° | |
| HSK100A-SR14-95 | 14 | 27 | 34 | 95 | 60 | 24 | 4.5° | |
| HSK100A-SR14-120 | 14 | 27 | 34 | 120 | 60 | 24 | 4.5° | |
| HSK100A-SR14-160 | 14 | 27 | 42 | 160 | 60 | 24 | 4.5° | |
| HSK100A-SR16-100 | 16 | 27 | 34 | 100 | 65 | 25 | 4.5° | |
| HSK100A-SR16-120 | 16 | 27 | 34 | 120 | 65 | 25 | 4.5° | |
| HSK100A-SR16-160 | 16 | 27 | 42 | 160 | 65 | 25 | 4.5° | |
| HSK100A-SR18-100 | 18 | 33 | 42 | 100 | 65 | 25 | 4.5° | |
| HSK100A-SR18-120 | 18 | 33 | 42 | 120 | 65 | 25 | 4.5° | |
| HSK100A-SR18-160 | 18 | 33 | 51 | 160 | 65 | 25 | 4.5° | |
| HSK100A-SR20-105 | 20 | 33 | 42 | 105 | 65 | 25 | 4.5° | |
| HSK100A-SR20-120 | 20 | 33 | 42 | 120 | 65 | 25 | 4.5° | |
| HSK100A-SR20-160 | 20 | 33 | 51 | 160 | 65 | 25 | 4.5° |
BBT40-SRV 热胀刀柄(增强型)BBT40-SRV Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | N | A | 备注Note |
| BBT40-SRV04-150 | 4 | 12 | 53 | 150 | 67 | 1 | 1 | 5° | |
| BBT40-SRV04-180 | 4 | 12 | 53 | 180 | 67 | 1 | 1 | 5° | |
| BBT40-SRV04-210 | 4 | 12 | 53 | 210 | 67 | 1 | 1 | 5° | |
| BBT40-SRV06-150 | 6 | 14 | 53 | 150 | 67 | 1 | 1 | 5° | |
| BBT40-SRV06-180 | 6 | 14 | 53 | 180 | 67 | 1 | 1 | 5° | |
| BBT40-SRV06-210 | 6 | 14 | 53 | 210 | 67 | 1 | 1 | 5° | |
| BBT40-SRV08-150 | 8 | 16 | 53 | 150 | 67 | 45 | 18 | 5° | |
| BBT40-SRV08-180 | 8 | 16 | 53 | 180 | 67 | 45 | 18 | 5° | |
| BBT40-SRV08-210 | 8 | 16 | 53 | 210 | 67 | 45 | 18 | 5° | |
| BBT40-SRV10-150 | 10 | 18 | 53 | 150 | 67 | 52 | 20 | 5° | |
| BBT40-SRV10-180 | 10 | 18 | 53 | 180 | 67 | 52 | 20 | 5° | |
| BBT40-SRV10-210 | 10 | 18 | 53 | 210 | 67 | 52 | 20 | 5° | |
| BBT40-SRV12-150 | 12 | 20 | 53 | 150 | 67 | 60 | 28 | 5° | |
| BBT40-SRV12-180 | 12 | 20 | 53 | 180 | 67 | 60 | 28 | 5° | |
| BBT40-SRV12-210 | 12 | 20 | 53 | 210 | 67 | 60 | 28 | 5° |
HSK63A-SRV热胀刀柄(增强型)HSK63A-SRV Hot Tool Handle
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | N | A | 备注Note |
| HSK63A-SRV04-150 | 4 | 12 | 53 | 150 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV04-180 | 4 | 12 | 53 | 180 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV04-210 | 4 | 12 | 53 | 210 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV06-150 | 6 | 14 | 53 | 150 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV06-180 | 6 | 14 | 53 | 180 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV06-210 | 6 | 14 | 53 | 210 | 67 | 1 | 1 | 5° | |
| HSK63A-SRV08-150 | 8 | 16 | 53 | 150 | 67 | 45 | 18 | 5° | |
| HSK63A-SRV08-180 | 8 | 16 | 53 | 180 | 67 | 45 | 18 | 5° | |
| HSK63A-SRV08-210 | 8 | 16 | 53 | 210 | 67 | 45 | 18 | 5° | |
| HSK63A-SRV10-150 | 10 | 18 | 53 | 150 | 67 | 52 | 20 | 5° | |
| HSK63A-SRV10-180 | 10 | 18 | 53 | 180 | 67 | 52 | 20 | 5° | |
| HSK63A-SRV10-210 | 10 | 18 | 53 | 210 | 67 | 52 | 20 | 5° | |
| HSK63A-SRV12-150 | 12 | 20 | 53 | 150 | 67 | 60 | 28 | 5° | |
| HSK63A-SRV12-180 | 12 | 20 | 53 | 180 | 67 | 60 | 28 | 5° | |
| HSK63A-SRV12-210 | 12 | 20 | 53 | 210 | 67 | 60 | 28 | 5° |
分体式-本体刀柄Split type - Body Handle
| 型号Designation | 图 | D1 | D2 | D3 | L | L1 | L2 | L3 | L4 | L5 |
| BT30-SLK12-45 | 1 | 38 | 一 | 一 | 45 | 23 | 一 | 一 | 一 | 一 |
| BT40-SLK12-45 | 1 | 38 | 一 | - | 45 | 18 | – | - | - | 一 |
| BT40-SLK12-75 | 1 | 38 | - | - | 75 | 48 | 一 | - | - | 一 |
| BT40-SLK12-135 | 1 | 38 | 47 | - | 135 | 108 | 86 | - | - | - |
| BT40-SLK12-225 | 1 | 38 | 47 | 52 | 225 | 198 | 86 | 140 | 5 | - |
| BT50-SLK12-75 | 1 | 38 | 65 | - | 75 | 37 | 25 | - | - | 12 |
| BT50-SLK12-105 | 1 | 38 | 65 | - | 105 | 67 | 55 | - | - | 12 |
| BT50-SLK12-135 | 1 | 38 | 65 | 一 | 135 | 97 | 85 | - | - | 12 |
| BT50-SLK12-225 | 1 | 38 | 65 | - | 225 | 187 | 150 | - | - | 37 |
| BBT30-SLK12-45 | 1 | 38 | 一 | 一 | 45 | 23 | 一 | - | - | - |
| BBT40-SLK12-45 | 1 | 38 | 一 | 一 | 45 | 18 | 一 | 一 | - | - |
| BBT40-SLK12-75 | 1 | 38 | 一 | - | 75 | 48 | 一 | - | - | - |
| BBT40-SLK12-135 | 1 | 38 | 47 | - | 135 | 108 | 86 | - | - | 一 |
| BBT40-SLK12-225 | 1 | 38 | 47 | 52 | 225 | 198 | 86 | 140 | 5 | - |
| BBT50-SLK12-75 | 1 | 38 | 65 | 一 | 75 | 37 | 25 | 一 | - | 12 |
| BBT50-SLK12-105 | 1 | 38 | 65 | 一 | 105 | 67 | 55 | 一 | - | 12 |
| BBT50-SLK12-135 | 1 | 38 | 65 | 一 | 135 | 97 | 85 | - | - | 12 |
| BBT50-SLK12-225 | 1 | 38 | 65 | 一 | 225 | 187 | 150 | 一 | - | 37 |
| HSK A63-SLK12-75 | 2 | 38 | - | 一 | 75 | 49 | 一 | - | - | 一 |
| HSK A63-SLK12-135 | 2 | 38 | 47 | 一 | 135 | 109 | 86 | – | - | 一 |
| HSK A63-SLK12-165 | 2 | 38 | 47 | 一 | 165 | 139 | 86 | – | - | 一 |
| HSK A63-SLK12-200 | 2 | 38 | 47 | 52 | 200 | 174 | 86 | 140 | 5 | 一 |
| HSK A63-SLK12-225 | 2 | 38 | 47 | 52 | 225 | 199 | 86 | 140 | 5 | 一 |
| HSK A100-SLK12-105 | 3 | 38 | 65 | 一 | 105 | 76 | 43 | - | - | 33 |
| HSKA100-SLK12-135 | 3 | 38 | 65 | - | 135 | 106 | 73 | - | - | 33 |
| HSK A100-SLK12-225 | 3 | 38 | 83 | - | 225 | 196 | 163 | - | - | 33 |
| HSK E50-SLK12-75 | 2 | 38 | - | - | 75 | 49 | - | - | - | - |
| HSK E50-SLK12-120 | 2 | 38 | - | - | 120 | 94 | - | - | - | 一 |
CR12(标准型)CR12(Standard)
CS12(薄壁型)CS12(Thin wall)
| 型号Designation | 图 | d | D1 | D2 | 壁厚(t) | L | L1 | L2 | L3 | L4 | H |
| CR12-4-55 | 1 | 4 | 10 | - | 3 | 55 | 9.5 | 3.5 | 42 | - | 13 |
| CR12-4-80 | 1 | 4 | 10 | - | 3 | 80 | 9.5 | 3.5 | 67 | - | 13 |
| CR12-4-110 | 1 | 4 | 10 | - | 3 | 110 | 9.5 | 3.5 | 97 | - | 13 |
| CR12-6-55 | 1 | 6 | 12 | - | 3 | 55 | 9.5 | 3.5 | 42 | - | 20 |
| CR12-6-80 | 1 | 6 | 12 | - | 3 | 80 | 9.5 | 3.5 | 67 | 一 | 20 |
| CR12-6-110 | 1 | 6 | 12 | 一 | 3 | 110 | 9.5 | 3.5 | 97 | - | 20 |
| CR12-8-55 | 1 | 8 | 14 | 一 | 3 | 55 | 9.5 | 3.5 | 42 | - | 25 |
| CR12-8-80 | 1 | 8 | 14 | 一 | 3 | 80 | 9.5 | 3.5 | 67 | - | 25 |
| CR12-8-110 | 1 | 8 | 14 | 一 | 3 | 110 | 9.5 | 3.5 | 97 | - | 25 |
| CR12-10-55 | 1 | 10 | 16 | - | 3 | 55 | 9.5 | 3.5 | 42 | 55 | 30 |
| CR12-10-80 | 1 | 10 | 16 | - | 3 | 80 | 9.5 | 3.5 | 67 | 55 | 30 |
| CR12-10-110 | 2 | 10 | 16 | 25 | 3 | 110 | 9.5 | 3.5 | 97 | 55 | 30 |
| CR12-12-55 | 1 | 12 | 20 | - | 4 | 55 | 9.5 | 3.5 | 42 | 55 | 30 |
| CR12-12-80 | 2 | 12 | 20 | 25.5 | 4 | 80 | - | 3.5 | - | 55 | 30 |
| CR12-12-110 | 2 | 12 | 20 | 25.5 | 4 | 110 | - | 3.5 | - | 55 | 30 |
| 型号Designation | 图 | d | D1 | D2 | 壁厚(t) | L | L1 | L2 | L3 | L4 | H |
| CS12-4-55 | 1 | 4 | 7 | – | 1.5 | 55 | 9.5 | 3.5 | 42 | - | 13 |
| CS12-4-80 | 1 | 4 | 7 | - | 1.5 | 80 | 9.5 | 3.5 | 67 | - | 13 |
| CS12-4-110 | 1 | 4 | 7 | 一 | 1.5 | 110 | 9.5 | 3.5 | 97 | - | 13 |
| CS12-6-55 | 1 | 6 | 9 | - | 1.5 | 55 | 9.5 | 3.5 | 42 | - | 20 |
| CS12-6-80 | 1 | 6 | 9 | - | 1.5 | 80 | 9.5 | 3.5 | 67 | - | 20 |
| CS12-6-110 | 1 | 6 | 9 | - | 1.5 | 110 | 9.5 | 3.5 | 97 | - | 20 |
| CS12-8-55 | 1 | 8 | 11 | - | 1.5 | 55 | 9.5 | 3.5 | 42 | - | 25 |
| CS12-8-80 | 1 | 8 | 11 | - | 1.5 | 80 | 9.5 | 3.5 | 67 | - | 25 |
| CS12-8-110 | 1 | 8 | 11 | - | 1.5 | 110 | 9.5 | 3.5 | 97 | - | 25 |
| CS12-10-55 | 1 | 10 | 13 | - | 1.5 | 55 | 9.5 | 3.5 | 42 | 55 | 30 |
| CS12-10-80 | 1 | 10 | 13 | - | 1.5 | 80 | 9.5 | 3.5 | 67 | 55 | 30 |
| CS12-10-110 | 1 | 10 | 13 | – | 1.5 | 110 | 9.5 | 3.5 | 97 | 55 | 30 |
| CS12-12-55 | 1 | 12 | 15 | 一 | 1.5 | 55 | 9.5 | 3.5 | 42 | 55 | 30 |
| CS12-12-80 | 1 | 12 | 15 | 一 | 1.5 | 80 | 9.5 | 3.5 | 67 | 55 | 30 |
| CS12-12-110 | 2 | 12 | 15 | 25 | 1.5 | 110 | – | 3.5 | 一 | 55 | 30 |
SW12/16/20/25-SRS 钨钢抗震热胀延长杆(薄壁型)SW12/16/20/25-SRS Hot Handle Extension Tool
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | L4 | 备注Note |
| SW12-SRS04-150 | 12 | 4 | 10 | 150 | 19 | 12 | 35 | |
| SW12-SRS04-200 | 12 | 4 | 10 | 200 | 19 | 12 | 35 | |
| SW12-SRS04-250 | 12 | 4 | 10 | 250 | 19 | 12 | 35 | |
| SW16-SRS04-150 | 16 | 4 | 10 | 150 | 57 | 12 | 47 | |
| SW16-SRS04-200 | 16 | 4 | 10 | 200 | 57 | 12 | 47 | |
| SW16-SRS04-250 | 16 | 4 | 10 | 250 | 57 | 12 | 47 | |
| SW16-SRS04-300 | 16 | 4 | 10 | 300 | 57 | 12 | 47 | |
| SW16-SRS06-150 | 16 | 6 | 12 | 150 | 38 | 18 | 35 | |
| SW16-SRS06-200 | 16 | 6 | 12 | 200 | 38 | 18 | 35 | |
| SW16-SRS06-250 | 16 | 6 | 12 | 250 | 38 | 18 | 35 | |
| SW16-SRS06-300 | 16 | 6 | 12 | 300 | 38 | 18 | 35 | |
| SW16-SRS08-150 | 16 | 8 | 14 | 150 | 19 | 24 | 40 | |
| SW16-SRS08-200 | 16 | 8 | 14 | 200 | 19 | 24 | 40 | |
| SW16-SRS08-250 | 16 | 8 | 14 | 250 | 19 | 24 | 40 | |
| SW16-SRS08-300 | 16 | 8 | 14 | 300 | 19 | 24 | 40 | |
| SW20-SRS08-150 | 20 | 8 | 14 | 150 | 57 | 24 | 45 | |
| SW20-SRS08-200 | 20 | 8 | 14 | 200 | 57 | 24 | 45 | |
| SW20-SRS08-250 | 20 | 8 | 14 | 250 | 57 | 24 | 45 | |
| SW20-SRS08-300 | 20 | 8 | 14 | 300 | 57 | 24 | 45 | |
| SW20-SRS10-150 | 20 | 10 | 16 | 150 | 38 | 30 | 45 | |
| SW20-SRS10-200 | 20 | 10 | 16 | 200 | 38 | 30 | 45 | |
| SW20-SRS10-250 | 20 | 10 | 16 | 250 | 38 | 30 | 45 | |
| SW20-SRS10-300 | 20 | 10 | 16 | 300 | 38 | 30 | 45 | |
| SW20-SRS12-150 | 20 | 12 | 18 | 150 | 19 | 32 | 50 | |
| SW20-SRS12-200 | 20 | 12 | 18 | 200 | 19 | 32 | 50 | |
| SW20-SRS12-250 | 20 | 12 | 18 | 250 | 19 | 32 | 50 | |
| SW20-SRS12-300 | 20 | 12 | 18 | 300 | 19 | 32 | 50 | |
| SW25-SRS12-150 | 25 | 12 | 18 | 150 | 67 | 32 | 54 | |
| SW25-SRS12-200 | 25 | 12 | 18 | 200 | 67 | 32 | 54 | |
| SW25-SRS12-250 | 25 | 12 | 18 | 250 | 67 | 32 | 54 | |
| SW25-SRS12-300 | 25 | 12 | 18 | 300 | 67 | 32 | 54 |
ST12-SRS热胀延长杆(薄壁型)ST12-SRS Hot Handle Extension Tool
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | L4 | N | FIG | 备注Note |
| ST12-SRS03-110 | 12 | 3 | 8 | 110 | 38 | 9 | 1 | 1 | FIG2 | |
| ST12-SRS03-150 | 12 | 3 | 8 | 150 | 38 | 9 | 1 | 1 | FIG2 | |
| ST12-SRS3.175-110 | 12 | 3.175 | 8 | 110 | 38 | 10 | 1 | 1 | FIG2 | |
| ST12-SRS3.175-150 | 12 | 3.175 | 8 | 150 | 38 | 10 | 1 | 1 | FIG2 | |
| ST12-SRS04-110 | 12 | 4 | 10 | 110 | 19 | 12 | 1 | 1 | FIG2 | |
| ST12-SRS04-150 | 12 | 4 | 10 | 150 | 19 | 12 | 1 | 1 | FIG2 |
ST16-SRS 热胀延长杆(薄壁型)ST16-SRS Hot Handle Extension Tool
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | L4 | N | FIG | 备注Note |
| ST16-SRS03-110 | 16 | 3 | 8 | 110 | 50 | 9 | 1 | 1 | FIG1 | |
| ST16-SRS03-150 | 16 | 3 | 8 | 150 | 76 | 9 | 1 | 1 | FIG2 | |
| ST16-SRS03-200 | 16 | 3 | 8 | 200 | 76 | 9 | 1 | 1 | FIG2 | |
| ST16-SRS3.175-110 | 16 | 3.175 | 8 | 110 | 50 | 10 | 1 | 1 | FIG1 | |
| ST16-SRS3.175-150 | 16 | 3.175 | 8 | 150 | 76 | 10 | 1 | 1 | FIG2 | |
| ST16-SRS3.175-200 | 16 | 3.175 | 8 | 200 | 76 | 10 | 1 | 1 | FIG2 | |
| ST16-SRS04-110 | 16 | 4 | 10 | 110 | 57 | 12 | 1 | 1 | FIG2 | |
| ST16-SRS04-150 | 16 | 4 | 10 | 150 | 57 | 12 | 1 | 1 | FIG2 | |
| ST16-SRS04-200 | 16 | 4 | 10 | 200 | 57 | 12 | 1 | 1 | FIG2 | |
| ST16-SRS06-110 | 16 | 6 | 12 | 110 | 38 | 18 | 1 | 1 | FIG2 | |
| ST16-SRS06-150 | 16 | 6 | 12 | 150 | 38 | 18 | 1 | 1 | FIG2 | |
| ST16-SRS06-200 | 16 | 6 | 12 | 200 | 38 | 18 | 1 | 1 | FIG2 | |
| ST16-SRS08-110 | 16 | 8 | 14 | 110 | 19 | 24 | 45 | 18 | FIG2 | |
| ST16-SRS08-150 | 16 | 8 | 14 | 150 | 19 | 24 | 45 | 18 | FIG2 | |
| ST16-SRS08-200 | 16 | 8 | 14 | 200 | 19 | 24 | 45 | 18 | FIG2 |
ST20-SRS热胀延长杆(薄壁型)ST20-SRS Hot Handle Extension Tool
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | L4 | N | FIG | 备注Note |
| ST20-SRS03-110 | 20 | 3 | 8 | 110 | 50 | 9 | 1 | 1 | FIG1 | |
| ST20-SRS03-150 | 20 | 3 | 8 | 150 | 90 | 9 | 1 | 1 | FIG1 | |
| ST20-SRS03-200 | 20 | 3 | 8 | 200 | 114 | 9 | 1 | 1 | FIG2 | |
| ST20-SRS03-250 | 20 | 3 | 8 | 250 | 114 | 9 | 1 | 1 | FIG2 | |
| ST20-SRS3.175-110 | 20 | 3.175 | 8 | 110 | 50 | 10 | 1 | 1 | FIG1 | |
| ST20-SRS3.175-150 | 20 | 3.175 | 8 | 150 | 90 | 10 | 1 | 1 | FIG1 | |
| ST20-SRS3.175-200 | 20 | 3.175 | 8 | 200 | 114 | 10 | 1 | 1 | FIG2 | |
| ST20-SRS3.175-250 | 20 | 3.175 | 8 | 250 | 114 | 10 | 1 | 1 | FIG2 | |
| ST20-SRS04-110 | 20 | 4 | 10 | 110 | 50 | 12 | 1 | 1 | FIG1 | |
| ST20-SRS04-150 | 20 | 4 | 10 | 150 | 95 | 12 | 1 | 1 | FIG2 | |
| ST20-SRS04-200 | 20 | 4 | 10 | 200 | 95 | 12 | 1 | 1 | FIG2 | |
| ST20-SRS04-250 | 20 | 4 | 10 | 250 | 95 | 12 | 1 | 1 | FIG2 | |
| ST20-SRS06-110 | 20 | 6 | 12 | 110 | 50 | 18 | 1 | 1 | FIG1 | |
| ST20-SRS06-150 | 20 | 6 | 12 | 150 | 76 | 18 | 1 | 1 | FIG2 | |
| ST20-SRS06-200 | 20 | 6 | 12 | 200 | 76 | 18 | 1 | 1 | FIG2 | |
| ST20-SRS06-250 | 20 | 6 | 12 | 250 | 76 | 18 | 1 | 1 | FIG2 | |
| ST20-SRS08-110 | 20 | 8 | 14 | 110 | 57 | 24 | 45 | 18 | FIG2 | |
| ST20-SRS08-150 | 20 | 8 | 14 | 150 | 57 | 24 | 45 | 18 | FIG2 | |
| ST20-SRS08-200 | 20 | 8 | 14 | 200 | 57 | 24 | 45 | 18 | FIG2 | |
| ST20-SRS08-250 | 20 | 8 | 14 | 250 | 57 | 24 | 45 | 18 | FIG2 | |
| ST20-SRS10-110 | 20 | 10 | 16 | 110 | 38 | 30 | 52 | 20 | FIG2 | |
| ST20-SRS10-150 | 20 | 10 | 16 | 150 | 38 | 30 | 52 | 20 | FIG2 | |
| ST20-SRS10-200 | 20 | 10 | 16 | 200 | 38 | 30 | 52 | 20 | FIG2 | |
| ST20-SRS10-250 | 20 | 10 | 16 | 250 | 38 | 30 | 52 | 20 | FIG2 | |
| ST20-SRS12-110 | 20 | 12 | 18 | 110 | 19 | 32 | 60 | 28 | FIG3 | |
| ST20-SRS12-150 | 20 | 12 | 18 | 150 | 19 | 32 | 60 | 28 | FIG3 | |
| ST20-SRS12-200 | 20 | 12 | 18 | 200 | 19 | 32 | 60 | 28 | FIG3 | |
| ST20-SRS12-250 | 20 | 12 | 18 | 250 | 19 | 32 | 60 | 28 | FIG3 |
ST25-SRS热胀延长杆(薄壁型)ST25-SRS Hot Handle Extension Tool
| 型号Designation | D1 | D2 | D3 | L1 | L2 | L3 | L4 | N | FIG | 备注Note |
| ST25-SRS06-110 | 25 | 6 | 12 | 110 | 50 | 18 | 1 | 1 | FIG1 | |
| ST25-SRS06-150 | 25 | 6 | 12 | 150 | 90 | 18 | 1 | 1 | FIG1 | |
| ST25-SRS06-200 | 25 | 6 | 12 | 200 | 124 | 18 | 1 | 1 | FIG2 | |
| ST25-SRS06-250 | 25 | 6 | 12 | 250 | 124 | 18 | 1 | 1 | FIG2 | |
| ST25-SRS08-110 | 25 | 8 | 14 | 110 | 50 | 24 | 45 | 18 | FIG1 | |
| ST25-SRS08-150 | 25 | 8 | 14 | 150 | 90 | 24 | 45 | 18 | FIG1 | |
| ST25-SRS08-200 | 25 | 8 | 14 | 200 | 105 | 24 | 45 | 18 | FIG2 | |
| ST25-SRS08-250 | 25 | 8 | 14 | 250 | 105 | 24 | 45 | 18 | FIG2 | |
| ST25-SRS10-110 | 25 | 10 | 16 | 110 | 50 | 30 | 52 | 20 | FIG1 | |
| ST25-SRS10-150 | 25 | 10 | 16 | 150 | 85 | 30 | 52 | 20 | FIG2 | |
| ST25-SRS10-200 | 25 | 10 | 16 | 200 | 85 | 30 | 52 | 20 | FIG2 | |
| ST25-SRS10-250 | 25 | 10 | 16 | 250 | 85 | 30 | 52 | 20 | FIG2 | |
| ST25-SRS12-110 | 25 | 12 | 18 | 110 | 50 | 32 | 60 | 28 | FIG1 | |
| ST25-SRS12-150 | 25 | 12 | 18 | 150 | 67 | 32 | 60 | 28 | FIG2 | |
| ST25-SRS12-200 | 25 | 12 | 18 | 200 | 67 | 32 | 60 | 28 | FIG2 | |
| ST25-SRS12-250 | 25 | 12 | 18 | 250 | 67 | 32 | 60 | 28 | FIG2 |
小径刀柄系列Small Tool Handle Series
BBT30-ME小径刀柄BBT30-MEsmall tool handle
| 型号Designation | d夹持直径 | D1 | L | L1 | 对应筒夹Corresponding collet | 对应螺母Corresponding nut |
| BBT30-MEGA4S-60 | 0.45-4.05 | 12 | 60 | 30 | NBC4S | MGN4S |
| BBT30-MEGA4S-90 | 0.45-4.05 | 12 | 90 | 60 | NBC4S | MGN4S |
| BBT30-MEGA4S-120 | 0.45-4.05 | 12 | 120 | 90 | NBC4S | MGN4S |
| BBT30-MEGA6S-60 | 0.45-6.05 | 14 | 60 | 30 | NBC6S | MGN6S |
| BBT30-MEGA6S-90 | 0.45-6.05 | 14 | 90 | 60 | NBC6S | MGN6S |
| BBT30-MEGA6S-120 | 0.45-6.05 | 14 | 120 | 90 | NBC6S | MGN6S |
| BBT30-MEGA8S-60 | 2.95-8.05 | 18 | 60 | 30 | NBC8S | MGN8S |
| BBT30-MEGA8S-90 | 2.95-8.05 | 18 | 90 | 60 | NBC8S | MGN8S |
| BBT30-MEGA8S-120 | 2.95-8.05 | 18 | 120 | 90 | NBC8S | MGN8S |
BBT40-ME小径刀柄BBT40-ME small tool handle
| 型号Designation | d夹持直径 | D1 | L | L1 | 对应筒夹Corresponding collet | 对应螺母Corresponding nut |
| BBT40-MEGA4S-60 | 0.45-4.05 | 12 | 60 | 30 | NBC4S | MGN4S |
| BBT40-MEGA4S-90 | 0.45-4.05 | 12 | 90 | 60 | NBC4S | MGN4S |
| BBT40-MEGA4S-120 | 0.45-4.05 | 12 | 120 | 90 | NBC4S | MGN4S |
| BBT40-MEGA6S-60 | 0.45-6.05 | 14 | 60 | 30 | NBC6S | MGN6S |
| BBT40-MEGA6S-90 | 0.45-6.05 | 14 | 90 | 60 | NBC6S | MGN6S |
| BBT40-MEGA6S-120 | 0.45-6.05 | 14 | 120 | 90 | NBC6S | MGN6S |
| BBT40-MEGA8S-60 | 2.95-8.05 | 18 | 60 | 30 | NBC8S | MGN8S |
| BBT40-MEGA8S-90 | 2.95-8.05 | 18 | 90 | 60 | NBC8S | MGN8S |
| BBT40-MEGA8S-120 | 2.95-8.05 | 18 | 120 | 90 | NBC8S | MGN8S |
HSK63A-ME小径刀柄HSK63A-ME Small tool handle
相应配件Accessories
| 型号Designation | d夹持直径 | D1 | L | L1 | 对应筒夹Corresponding collet | 对应螺母Corresponding nut |
| HSK63A-MEGA4S-60 | 0.45-4.05 | 12 | 60 | 30 | NBC4S | MGN4S |
| HSK63A-MEGA4S-90 | 0.45-4.05 | 12 | 90 | 60 | NBC4S | MGN4S |
| HSK63A-MEGA4S-120 | 0.45-4.05 | 12 | 120 | 90 | NBC4S | MGN4S |
| HSK63A-MEGA6S-60 | 0.45-6.05 | 14 | 60 | 30 | NBC6S | MGN6S |
| HSK63A-MEGA6S-90 | 0.45-6.05 | 14 | 90 | 60 | NBC6S | MGN6S |
| HSK63A-MEGA6S-120 | 0.45-6.05 | 14 | 120 | 90 | NBC6S | MGN6S |
| HSK63A-MEGA8S-60 | 2.95-8.05 | 18 | 60 | 30 | NBC8S | MGN8S |
| HSK63A-MEGA8S-90 | 2.95-8.05 | 18 | 90 | 60 | NBC8S | MGN8S |
| HSK63A-MEGA8S-120 | 2.95-8.05 | 18 | 120 | 90 | NBC8S | MGN8S |
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| MEGA4S | NBC4S | MGN4S | MGN4F | MGR12TL |
| MEGA6S | NBC6S | MGN6S | MGN6F | MGR14TL |
| MEGA8S | NBC8S | MGN8S | MGN8F | MGR18TL |
螺纹连接刀柄系列Threaded Handle Series
命名规则
Naming Rule
螺纹连接刀柄系统
Threaded Handle System
主要特点
Main Features
拆换刀具便捷/刚性强、震动小/加工效率快
Easy To Assemble And Disassemble Cutting Tools/Hight Rigidity,Low Vibration/ High Effciency Machining.
BBT30-M螺纹连接刀柄(斜柄)BBT30-M Threaded Handle (Taper shank)
BBT40-M螺纹连接刀柄(斜柄)BBT40-M Threaded Handle (Taper shank)
| 型号Designation | L1 | L2 | D1 | D2 | D3 | M | α | R | 备注Note |
| BBT30-M08-45 | 45 | 12 | 15.4 | 8.5 | 17 | M08 | 5° | 4 | |
| BBT30-M08-60 | 60 | 12 | 15.4 | 8.5 | 25 | M08 | 5° | 4 | |
| BBT30-M10-45 | 45 | 12 | 19 | 10.5 | 20 | M10 | 4° | 4 | |
| BBT30-M10-60 | 60 | 12 | 19 | 10.5 | 27 | M10 | 4° | 4 | |
| BBT30-M12-45 | 45 | 12 | 24 | 12.5 | 25 | M12 | 4° | 4 | |
| BBT30-M12-60 | 60 | 12 | 24 | 12.5 | 32 | M12 | 4° | 2 | |
| BBT30-M16-45 | 45 | 12 | 29 | 17 | 30 | M16 | 4° | 2 | |
| BBT30-M16-60 | 60 | 12 | 29 | 17 | 37 | M16 | 4° | 2 |
| 型号Designation | L1 | L2 | D1 | D2 | D3 | M | α | R | 备注Note |
| BBT40-M08-60 | 60 | 12 | 15.4 | 8.5 | 19 | M08 | 5° | 5 | |
| BBT40-M10-60 | 60 | 12 | 19 | 10.5 | 22 | M10 | 4° | 5 | |
| BBT40-M10-90 | 90 | 12 | 19 | 10.5 | 26 | M10 | 4° | 5 | |
| BBT40-M12-60 | 60 | 12 | 23 | 12.5 | 26 | M12 | 4° | 5 | |
| BBT40-M12-90 | 90 | 12 | 23 | 12.5 | 30 | M12 | 4° | 5 | |
| BBT40-M16-60 | 60 | 12 | 28.8 | 17 | 32 | M16 | 4° | 5 | |
| BBT40-M16-90 | 90 | 12 | 28.8 | 17 | 36 | M16 | 4° | 5 |
BBT50-M螺纹连接刀柄(斜柄)BBT50-M Threaded Handle(Taper shank)
| 型号Designation | L1 | L2 | D1 | D2 | D3 | M | α | R | 备注Note |
| BBT50-M08-90 | 90 | 12 | 15.4 | 8.5 | 22 | M08 | $5 ^ { \circ }$ | 10 | |
| BBT50-M10-90 | 90 | 12 | 19 | 10.5 | 25 | M10 | $4 ^ { \circ }$ | 10 | |
| BBT50-M12-90 | 90 | 12 | 24 | 12.5 | 30 | M12 | $4 ^ { \circ }$ | 10 | |
| BBT50-M12-135 | 135 | 12 | 24 | 12.5 | 36 | M12 | 4° | 10 | |
| BBT50-M16-90 | 90 | 12 | 29 | 17 | 35 | M16 | 4° | 10 | |
| BBT50-M16-135 | 135 | 12 | 29 | 17 | 41 | M16 | 4° | 10 |
HSK63A-M螺纹连接刀柄(斜柄)HSK63A-M Threaded Handle(Taper shank)
| 型号Designation | L1 | L2 | D1 | D2 | D3 | M | α | R | 备注Note |
| HSK63A-M08-60 | 60 | 12 | 15.4 | 8.5 | 19 | M08 | $5 ^ { \circ }$ | 5 | |
| HSK63A-M10-60 | 60 | 12 | 19 | 10.5 | 22 | M10 | $4 ^ { \circ }$ | 5 | |
| HSK63A-M10-90 | 90 | 12 | 19 | 10.5 | 26 | M10 | $4 ^ { \circ }$ | 5 | |
| HSK63A-M12-60 | 60 | 12 | 24 | 12.5 | 27 | M12 | $4 ^ { \circ }$ | 5 | |
| HSK63A-M12-90 | 90 | 12 | 24 | 12.5 | 31 | M12 | $4 ^ { \circ }$ | 5 | |
| HSK63A-M16-60 | 60 | 12 | 29 | 17 | 32 | M16 | $4 ^ { \circ }$ | 5 | |
| HSK63A-M16-90 | 90 | 12 | 29 | 17 | 36 | M16 | $4 ^ { \circ }$ | 5 |
BBT30-M螺纹连接刀柄(直柄) BBT30-M Threaded Handle (Straight handle)
| 型号Designation | L1 | L2 | D1 | D2 | D3 | M | α | R | 备注Note |
| BBT30-M08-45 | 45 | 12 | 15.4 | 8.5 | 17 | M08 | 5° | 4 | |
| BBT30-M08-60 | 60 | 12 | 15.4 | 8.5 | 25 | M08 | 5° | 4 | |
| BBT30-M10-45 | 45 | 12 | 19 | 10.5 | 20 | M10 | 4° | 4 | |
| BBT30-M10-60 | 60 | 12 | 19 | 10.5 | 27 | M10 | 4° | 4 | |
| BBT30-M12-45 | 45 | 12 | 24 | 12.5 | 25 | M12 | 4° | 4 | |
| BBT30-M12-60 | 60 | 12 | 24 | 12.5 | 32 | M12 | 4° | 2 | |
| BBT30-M16-45 | 45 | 12 | 29 | 17 | 30 | M16 | 4° | 2 | |
| BBT30-M16-60 | 60 | 12 | 29 | 17 | 37 | M16 | 4° | 2 |
BBT40-MC螺纹连接刀柄(直柄)BBT40-MC Threaded Handle(Straight handle)
| 型号Designation | L1 | L2 | D1 | D2 | M | R | 备注Note |
| BBT40-MC08-60 | 60 | 33 | 15.4 | 8.5 | M08 | 5 | |
| BBT40-MC10-60 | 60 | 33 | 19 | 10.5 | M10 | 5 | |
| BBT40-MC10-90 | 90 | 63 | 19 | 10.5 | M10 | 5 | |
| BBT40-MC12-60 | 60 | 33 | 24 | 12.5 | M12 | 5 | |
| BBT40-MC12-90 | 90 | 63 | 24 | 12.5 | M12 | 5 | |
| BBT40-MC16-60 | 60 | 33 | 29 | 17 | M16 | 5 | |
| BBT40-MC16-90 | 90 | 63 | 29 | 17 | M16 | 5 |
BBT50-M螺纹连接刀柄(斜柄)BBT50-M Threaded Handle(Taper shank)
| 型号Designation | L1 | L2 | D1 | D2 | M | R | 备注Note |
| BBT50-MC08-90 | 90 | 52 | 15.4 | 8.5 | M08 | 10 | |
| BBT50-MC10-90 | 90 | 52 | 19 | 10.5 | M10 | 10 | |
| BBT50-MC12-90 | 90 | 52 | 24 | 12.5 | M12 | 10 | |
| BBT50-MC16-90 | 90 | 52 | 29 | 17 | M16 | 10 |
HSK63A-MC螺纹连接刀柄(直柄)HSK63A-MC Threaded Handle (Straight handle)
| 型号Designation | L1 | L2 | D1 | D2 | M | 备注Note |
| HSK63A-MC08-60 | 60 | 34 | 15.4 | 8.5 | M8 | |
| HSK63A-MC10-60 | 60 | 34 | 19 | 10.5 | M10 | |
| HSK63A-MC10-90 | 90 | 64 | 19 | 10.5 | M10 | |
| HSK63A-MC12-60 | 60 | 34 | 24 | 12.5 | M12 | |
| HSK63A-MC12-90 | 90 | 64 | 24 | 12.5 | M12 | |
| HSK63A-MC16-60 | 60 | 34 | 29 | 17 | M16 | |
| HSK63A-MC16-90 | 90 | 64 | 29 | 17 | M16 |
BBT30-MX后拉刀柄BBT30-MX Pull Back Handle
相应配件 Accessories
| 型号Designation | d把握直径 | D1 | D2 | D3 | L | A | FIG | 拉杆Screw | 扭力值Torque | 备注Note |
| BBT30-MX06-60 | 2.0-6.0 | 14 | 16 | 21.5 | 60 | 28 | 2 | M5*30 | 5NM | |
| BBT30-MX06-90 | 2.0-6.0 | 14 | 18 | 29 | 90 | 52 | 2 | M5*60 | 5NM | |
| BBT30-MX06-120 | 2.0-6.0 | 14 | 20.5 | 38 | 120 | 62 | 2 | M5*90 | 5NM | |
| BBT30-MX06-150 | 2.0-6.0 | 14 | 31 | 1 | 150 | 125 | 2 | M5*120 | 5NM | |
| BBT30-MX10-60 | 2.0-10.0 | 22 | 26 | 1 | 60 | 36 | 2 | M6*30 | 7NM | |
| BBT30-MX10-90 | 2.0-10.0 | 22 | 29 | 1 | 90 | 66 | 2 | M6*60 | 7NM | |
| BBT30-MX10-130 | 2.0-10.0 | 22 | 33 | 1 | 130 | 106 | 1 | M6*100 | 7NM | |
| BBT30-MX12-80 | 3.0-12.0 | 34 | 34 | 1 | 80 | 55 | 1 | M10*30 | 15NM | |
| BBT30-MX12-120 | 3.0-12.0 | 32 | 35 | 1 | 120 | 95 | 1 | M10*60 | 15NM |
| 型号Designation | 筒夹Collet | 扳手Spanner |
| MX06 | MX06 | HS-T4 |
| MX10 | MX10 | HS-T5 |
| MX12 | MX12 | HS-T8 |
BBT40-MX后拉刀柄BBT40-MX Pull Back Handle
相应配件Accessories
| 型号Designation | d把握直径 | D1 | D2 | D3 | L | A | FIG | 拉杆Screw | 扭力值Torque | 备注Note |
| BBT40-MX06-90 | 2.0-6.0 | 14 | 18 | 25 | 90 | 47 | 1 | M5*70 | 5NM | |
| BBT40-MX06-120 | 2.0-6.0 | 14 | 19.5 | 35 | 120 | 63 | 1 | M5*100 | 5NM | |
| BBT40-MX06-150 | 2.0-6.0 | 14 | 21 | 48 | 150 | 79 | 1 | M5*130 | 5NM | |
| BBT40-MX06-200 | 2.0-6.0 | 14 | 44 | 1 | 200 | 170 | 1 | M5*180 | 5NM | |
| BBT40-MX10-90 | 2.0-10.0 | 22 | 27.5 | 32 | 90 | 55 | 1 | M6*60 | 7NM | |
| BBT40-MX10-120 | 2.0-10.0 | 22 | 29 | 44 | 120 | 71 | 1 | M6*90 | 7NM | |
| BBT40-MX10-150 | 2.0-10.0 | 22 | 31 | 55 | 150 | 90 | 1 | M6*120 | 7NM | |
| BBT40-MX10-200 | 2.0-10.0 | 22 | 36.5 | 53 | 200 | 141 | 1 | M6*170 | 7NM | |
| BBT40-MX12-90 | 3.0-12.0 | 34 | 34 | 1 | 90 | 58 | 2 | M10*30 | 15NM | |
| BBT40-MX12-120 | 3.0-12.0 | 34 | 43.5 | 1 | 120 | 90 | 2 | M10*60 | 15NM | |
| BBT40-MX12-150 | 3.0-12.0 | 34 | 46.5 | 1 | 150 | 119 | 2 | M10*90 | 15NM | |
| BBT40-MX12-200 | 3.0-12.0 | 34 | 56 | 1 | 200 | 171 | 2 | M10*140 | 15NM |
T型扳手
| 型号Designation | 筒夹Collet | 扳手Spanner |
| MX06 | MX06 | HS-T4 |
| MX10 | MX10 | HS-T5 |
| MX12 | MX12 | HS-T8 |
BBT50-MX后拉刀柄BBT50-MX Pull Back Handle
| 型号Designation | d把握直径 | D1 | D2 | D3 | L | A | FIG | 拉杆Screw | 扭力值Torque | 备注Note |
| BBT50-MX06-90 | 2.0-6.0 | 14 | 18 | 25 | 90 | 47 | 1 | M5*70 | 5NM | |
| BBT50-MX06-120 | 2.0-6.0 | 14 | 19.5 | 35 | 120 | 63 | 1 | M5*100 | 5NM | |
| BBT50-MX06-150 | 2.0-6.0 | 14 | 21 | 48 | 150 | 79 | 1 | M5*130 | 5NM | |
| BBT50-MX06-200 | 2.0-6.0 | 14 | 44 | 1 | 200 | 170 | 1 | M5*180 | 5NM | |
| BBT50-MX10-90 | 2.0-10.0 | 22 | 27.5 | 32 | 90 | 55 | 1 | M6*60 | 7NM | |
| BBT50-MX10-120 | 2.0-10.0 | 22 | 29 | 44 | 120 | 71 | 1 | M6*90 | 7NM | |
| BBT50-MX10-150 | 2.0-10.0 | 22 | 31 | 55 | 150 | 90 | 1 | M6*120 | 7NM | |
| BBT50-MX10-200 | 2.0-10.0 | 22 | 36.5 | 53 | 200 | 141 | 1 | M6*170 | 7NM | |
| BBT50-MX12-90 | 3.0-12.0 | 34 | 34 | 1 | 90 | 58 | 2 | M10*30 | 15NM | |
| BBT50-MX12-120 | 3.0-12.0 | 34 | 43.5 | 1 | 120 | 90 | 2 | M10*60 | 15NM | |
| BBT50-MX12-150 | 3.0-12.0 | 34 | 46.5 | 1 | 150 | 119 | 2 | M10*90 | 15NM | |
| BBT50-MX12-200 | 3.0-12.0 | 34 | 56 | 1 | 200 | 171 | 2 | M10*140 | 15NM |
HSK63A-MX后拉刀柄HSK63A-MX Pull Back Handle
相应配件Accessories
| 型号Designation | d把握直径 | D1 | D2 | D3 | L | A | FIG | 拉杆Screw | 扭力值Torque | 备注Note |
| HSK63A-MX06-90 | 2.0-6.0 | 14 | 19 | 28 | 90 | 46 | 1 | M5*30 | 5NM | |
| HSK63A-MX06-120 | 2.0-6.0 | 14 | 20 | 38 | 120 | 60 | 1 | M5*60 | 5NM | |
| HSK63A-MX06-150 | 2.0-6.0 | 14 | 23 | 42 | 150 | 85 | 1 | M5*90 | 5NM | |
| HSK63A-MX06-200 | 2.0-6.0 | 14 | 29 | 55 | 200 | 144 | 1 | M5*140 | 5NM | |
| HSK63A-MX10-90 | 2.0-10.0 | 22 | 28 | 48 | 90 | 55 | 1 | M6*25 | 7NM | |
| HSK63A-MX10-120 | 2.0-10.0 | 22 | 30 | 50 | 120 | 76 | 1 | M6*50 | 7NM | |
| HSK63A-MX10-150 | 2.0-10.0 | 22 | 32 | 54 | 150 | 96 | 1 | M6*80 | 7NM | |
| HSK63A-MX10-200 | 2.0-10.0 | 22 | 37 | 56 | 200 | 140 | 1 | M6*130 | 7NM | |
| HSK63A-MX12-105 | 3.0-12.0 | 34 | 1 | 1 | 90 | 74 | 1 | M10*30 | 15NM |
T型扳手
| 型号Designation | 筒夹Collet | 扳手Spanner |
| MX06 | MX06 | HS-T4 |
| MX10 | MX10 | HS-T5 |
| MX12 | MX12 | HS-T8 |
C10/12/16/20/25/32-MX后拉延长杆C10/12/16/20/25/32-MXPullBackExtension Rod
| 型号Designation | d把握直径 | D1 | D2 | L | A | 拉杆Screw | 扭力值Torque | 备注Note |
| C10-MX06-120 | 2.0-6.0 | 10 | 13 | 120 | 93 | M5*95 | 5NM | |
| C10-MX06-150 | 2.0-6.0 | 10 | 13 | 150 | 28 | M5*125 | 5NM | |
| C12-MX06-120 | 2.0-6.0 | 12 | 13 | 120 | 62 | M5*80 | 5NM | |
| C12-MX06-150 | 2.0-6.0 | 12 | 13 | 150 | 125 | M5*110 | 5NM | |
| C12-MX06-200 | 2.0-6.0 | 12 | 13 | 200 | 36 | M5*160 | 5NM | |
| C16-MX06-150 | 2.0-6.0 | 16 | 13 | 150 | 66 | M5*100 | 5NM | |
| C16-MX06-200 | 2.0-6.0 | 16 | 13 | 200 | 106 | M5*150 | 5NM | |
| C16-MX06-250 | 2.0-6.0 | 16 | 13 | 250 | 55 | M5*200 | 5NM | |
| C16-MX10-150 | 2.0-10.0 | 16 | 20 | 150 | 58 | M6*90 | 7NM | |
| C20-MX06-150 | 2.0-6.0 | 20 | 13 | 150 | 47 | M5*100 | 5NM | |
| C20-MX06-200 | 2.0-6.0 | 20 | 13 | 200 | 63 | M5*150 | 5NM | |
| C20-MX10-150 | 2.0-10.0 | 20 | 20 | 150 | 79 | M6*90 | 7NM | |
| C20-MX10-200 | 2.0-10.0 | 20 | 20 | 200 | 170 | M6*140 | 7NM | |
| C20-MX10-250 | 2.0-10.0 | 20 | 20 | 250 | 55 | M6*190 | 7NM | |
| C25-MX06-150 | 2.0-6.0 | 25 | 13 | 150 | 71 | M5*100 | 5NM | |
| C25-MX10-150 | 2.0-10.0 | 25 | 20 | 150 | 90 | M6*90 | 7NM | |
| C25-MX10-200 | 2.0-10.0 | 25 | 20 | 200 | 141 | M6*140 | 7NM | |
| C32-MX12-200 | 3.0-12.0 | 32 | 32 | 200 | 58 | M10*120 | 15NM | |
| C32-MX12-250 | 3.0-12.0 | 32 | 32 | 250 | 90 | M10*170 | 15NM | |
| C32-MX12-300 | 3.0-12.0 | 32 | 32 | 300 | 119 | M10*220 | 15NM |
HGER刀柄系列HGER High Speed Handle Series
BBT30-HGER 高速刀柄BBT30-HGER High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT30-HGER16-60 | 3.0-10.0 | 30 | 30.5 | 38 | 60 | TR22*1.5 | |
| BBT30-HGER16-75 | 3.0-10.0 | 30 | 30.5 | 53 | 75 | TR22*1.5 | |
| BBT30-HGER16-90 | 3.0-10.0 | 30 | 30.5 | 68 | 90 | TR22*1.5 | |
| BBT30-HGER16-120 | 3.0-10.0 | 30 | 30.5 | 98 | 120 | TR22*1.5 | |
| BBT30-HGER20-60 | 3.0-13.0 | 32 | 32.5 | 38 | 60 | TR26*1.5 | |
| BBT30-HGER20-75 | 3.0-13.0 | 32 | 32.5 | 53 | 75 | TR26*1.5 | |
| BBT30-HGER20-90 | 3.0-13.0 | 32 | 32.5 | 68 | 90 | TR26*1.5 | |
| BBT30-HGER20-120 | 3.0-13.0 | 32 | 32.5 | 98 | 120 | TR26*1.5 | |
| BBT30-HGER25-60 | 3.0-16.0 | 40 | 40.5 | 38 | 60 | TR32*1.5 | |
| BBT30-HGER25-75 | 3.0-16.0 | 40 | 40.5 | 53 | 75 | TR32*1.5 | |
| BBT30-HGER25-90 | 3.0-16.0 | 40 | 40.5 | 68 | 90 | TR32*1.5 | |
| BBT30-HGER25-120 | 3.0-16.0 | 40 | 40.5 | 98 | 120 | TR32*1.5 | |
| BBT30-HGER32-75 | 3.0-20.0 | 50 | 45 | 53 | 75 | TR40*1.5 | |
| BBT30-HGER32-90 | 3.0-20.0 | 50 | 45 | 68 | 90 | TR40*1.5 | |
| BBT30-HGER32-120 | 3.0-20.0 | 50 | 45 | 98 | 120 | TR40*1.5 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| HGER16 | HN-HGER16 | ER16 | ER16-OP | GH30 |
| HGER20 | HN-HGER20 | ER20 | ER20-OP | GH32 |
| HGER25 | HN-HGER25 | ER25 | ER25-OP | GH40 |
| HGER32 | HN-HGER32 | ER32 | ER32-OP | GH50 |
BBT30-HGER 高速刀柄BBT30-HGER High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT30-HGER16-60 | 3.0-10.0 | 30 | 30.5 | 38 | 60 | TR22*1.5 | |
| BBT30-HGER16-75 | 3.0-10.0 | 30 | 30.5 | 53 | 75 | TR22*1.5 | |
| BBT30-HGER16-90 | 3.0-10.0 | 30 | 30.5 | 68 | 90 | TR22*1.5 | |
| BBT30-HGER16-120 | 3.0-10.0 | 30 | 30.5 | 98 | 120 | TR22*1.5 | |
| BBT30-HGER20-60 | 3.0-13.0 | 32 | 32.5 | 38 | 60 | TR26*1.5 | |
| BBT30-HGER20-75 | 3.0-13.0 | 32 | 32.5 | 53 | 75 | TR26*1.5 | |
| BBT30-HGER20-90 | 3.0-13.0 | 32 | 32.5 | 68 | 90 | TR26*1.5 | |
| BBT30-HGER20-120 | 3.0-13.0 | 32 | 32.5 | 98 | 120 | TR26*1.5 | |
| BBT30-HGER25-60 | 3.0-16.0 | 40 | 40.5 | 38 | 60 | TR32*1.5 | |
| BBT30-HGER25-75 | 3.0-16.0 | 40 | 40.5 | 53 | 75 | TR32*1.5 | |
| BBT30-HGER25-90 | 3.0-16.0 | 40 | 40.5 | 68 | 90 | TR32*1.5 | |
| BBT30-HGER25-120 | 3.0-16.0 | 40 | 40.5 | 98 | 120 | TR32*1.5 | |
| BBT30-HGER32-75 | 3.0-20.0 | 50 | 45 | 53 | 75 | TR40*1.5 | |
| BBT30-HGER32-90 | 3.0-20.0 | 50 | 45 | 68 | 90 | TR40*1.5 | |
| BBT30-HGER32-120 | 3.0-20.0 | 50 | 45 | 98 | 120 | TR40*1.5 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| HGER16 | HN-HGER16 | ER16 | ER16-OP | GH30 |
| HGER20 | HN-HGER20 | ER20 | ER20-OP | GH32 |
| HGER25 | HN-HGER25 | ER25 | ER25-OP | GH40 |
| HGER32 | HN-HGER32 | ER32 | ER32-OP | GH50 |
BBT40-HGER 高速刀柄BBT40-HGER High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT40-HGER16-75 | 3.0-10.0 | 30 | 30.5 | 48 | 75 | TR22*1.5 | |
| BBT40-HGER16-90 | 3.0-10.0 | 30 | 30.5 | 63 | 90 | TR22*1.5 | |
| BBT40-HGER16-120 | 3.0-10.0 | 30 | 30.5 | 93 | 120 | TR22*1.5 | |
| BBT40-HGER16-150 | 3.0-10.0 | 30 | 30.5 | 123 | 150 | TR22*1.5 | |
| BBT40-HGER20-75 | 3.0-13.0 | 32 | 32.5 | 48 | 75 | TR26*1.5 | |
| BBT40-HGER20-90 | 3.0-13.0 | 32 | 32.5 | 63 | 90 | TR26*1.5 | |
| BBT40-HGER20-120 | 3.0-13.0 | 32 | 32.5 | 93 | 120 | TR26*1.5 | |
| BBT40-HGER20-150 | 3.0-13.0 | 32 | 32.5 | 123 | 150 | TR26*1.5 | |
| BBT40-HGER25-75 | 3.0-16.0 | 40 | 40.5 | 48 | 75 | TR32*1.5 | |
| BBT40-HGER25-90 | 3.0-16.0 | 40 | 40.5 | 63 | 90 | TR32*1.5 | |
| BBT40-HGER25-120 | 3.0-16.0 | 40 | 40.5 | 93 | 120 | TR32*1.5 | |
| BBT40-HGER25-150 | 3.0-16.0 | 40 | 40.5 | 123 | 150 | TR32*1.5 | |
| BBT40-HGER32-75 | 3.0-20.0 | 50 | 50.5 | 48 | 75 | TR40*1.5 | |
| BBT40-HGER32-90 | 3.0-20.0 | 50 | 50.5 | 63 | 90 | TR40*1.5 | |
| BBT40-HGER32-120 | 3.0-20.0 | 50 | 50.5 | 93 | 120 | TR40*1.5 | |
| BBT40-HGER32-150 | 3.0-20.0 | 50 | 50.5 | 123 | 150 | TR40*1.5 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| HGER16 | HN-HGER16 | ER16 | ER16-OP | GH30 |
| HGER20 | HN-HGER20 | ER20 | ER20-OP | GH32 |
| HGER25 | HN-HGER25 | ER25 | ER25-OP | GH40 |
| HGER32 | HN-HGER32 | ER32 | ER32-OP | GH50 |
BBT50-HGER 高速刀柄BBT50-HGER High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT50-HGER16-105 | 3.0-10.0 | 30 | 30.5 | 67 | 105 | TR22*1.5 | |
| BBT50-HGER16-135 | 3.0-10.0 | 30 | 30.5 | 97 | 135 | TR22*1.5 | |
| BBT50-HGER16-165 | 3.0-10.0 | 30 | 30.5 | 127 | 165 | TR22*1.5 | |
| BBT50-HGER20-105 | 3.0-13.0 | 32 | 32.5 | 67 | 105 | TR26*1.5 | |
| BBT50-HGER20-135 | 3.0-13.0 | 32 | 32.5 | 97 | 135 | TR26*1.5 | |
| BBT50-HGER20-165 | 3.0-13.0 | 32 | 32.5 | 127 | 165 | TR26*1.5 | |
| BBT50-HGER25-105 | 3.0-16.0 | 40 | 40.5 | 67 | 105 | TR32*1.5 | |
| BBT50-HGER25-135 | 3.0-16.0 | 40 | 40.5 | 97 | 135 | TR32*1.5 | |
| BBT50-HGER25-165 | 3.0-16.0 | 40 | 40.5 | 127 | 165 | TR32*1.5 | |
| BBT50-HGER25-200 | 3.0-16.0 | 40 | 40.5 | 162 | 200 | TR32*1.5 | |
| BBT50-HGER32-105 | 3.0-20.0 | 50 | 50.5 | 67 | 105 | TR40*1.5 | |
| BBT50-HGER32-135 | 3.0-20.0 | 50 | 50.5 | 97 | 135 | TR40*1.5 | |
| BBT50-HGER32-165 | 3.0-20.0 | 50 | 50.5 | 127 | 165 | TR40*1.5 | |
| BBT50-HGER32-200 | 3.0-20.0 | 50 | 50.5 | 162 | 200 | TR40*1.5 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| HGER16 | HN-HGER16 | ER16 | ER16-OP | GH30 |
| HGER20 | HN-HGER20 | ER20 | ER20-OP | GH32 |
| HGER25 | HN-HGER25 | ER25 | ER25-OP | GH40 |
| HGER32 | HN-HGER32 | ER32 | ER32-OP | GH50 |
HSK63A-HGER 高速刀柄HSK63A-HGER High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| HSK63A-HGER16-70 | 3.0-10.0 | 30 | 30.5 | 44 | 70 | TR22*1.5 | |
| HSK63A-HGER16-100 | 3.0-10.0 | 30 | 30.5 | 74 | 100 | TR22*1.5 | |
| HSK63A-HGER16-150 | 3.0-10.0 | 30 | 30.5 | 124 | 150 | TR22*1.5 | |
| HSK63A-HGER20-70 | 3.0-13.0 | 32 | 32.5 | 44 | 70 | TR26*1.5 | |
| HSK63A-HGER20-100 | 3.0-13.0 | 32 | 32.5 | 74 | 100 | TR26*1.5 | |
| HSK63A-HGER20-150 | 3.0-13.0 | 32 | 32.5 | 124 | 150 | TR26*1.5 | |
| HSK63A-HGER25-70 | 3.0-16.0 | 40 | 40.5 | 44 | 70 | TR32*1.5 | |
| HSK63A-HGER25-100 | 3.0-16.0 | 40 | 40.5 | 74 | 100 | TR32*1.5 | |
| HSK63A-HGER25-150 | 3.0-16.0 | 40 | 40.5 | 124 | 150 | TR32*1.5 | |
| HSK63A-HGER32-70 | 3.0-20.0 | 50 | 50.5 | 44 | 70 | TR40*1.5 | |
| HSK63A-HGER32-100 | 3.0-20.0 | 50 | 50.5 | 74 | 100 | TR40*1.5 | |
| HSK63A-HGER32-150 | 3.0-20.0 | 50 | 50.5 | 124 | 150 | TR40*1.5 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 止水筒夹CoolantType Collet | 扳手Spanner |
| HGER16 | HN-HGER16 | ER16 | ER16-OP | GH30 |
| HGER20 | HN-HGER20 | ER20 | ER20-OP | GH32 |
| HGER25 | HN-HGER25 | ER25 | ER25-OP | GH40 |
| HGER32 | HN-HGER32 | ER32 | ER32-OP | GH50 |
GSK刀柄系列 GSK High Speed Handle Series
命名规则
Naming Rule
GSK 高速刀柄
GSK High Speed Handle
主要特点
Main Features
配备单边4°筒夹,夹持面加长,增强夹持力,重复装夹精度高/跳动精度:0.003mm Equipped with single side 4° collet, clamping surface lengthen, enhance clamping force, high repeat clamping accuracy/jump accuracy :0.003mm
BBT30-GSK高速刀柄BBT30-GSK High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT30-GSK10-60 | 3.0-10.0 | 27.1 | 27.6 | 60 | 38 | M21.5*1.0 | |
| BBT30-GSK10-75 | 3.0-10.0 | 27.1 | 27.6 | 75 | 53 | M21.5*1.0 | |
| BBT30-GSK10-90 | 3.0-10.0 | 27.1 | 27.6 | 90 | 68 | M21.5*1.0 | |
| BBT30-GSK10-120 | 3.0-10.0 | 27.1 | 27.6 | 120 | 98 | M21.5*1.0 | |
| BBT30-GSK13-60 | 3.0-13.0 | 33 | 33.5 | 60 | 38 | M27.0*1.0 | |
| BBT30-GSK13-75 | 3.0-13.0 | 33 | 33.5 | 75 | 53 | M27.0*1.0 | |
| BBT30-GSK13-90 | 3.0-13.0 | 33 | 33.5 | 90 | 68 | M27.0*1.0 | |
| BBT30-GSK13-120 | 3.0-13.0 | 33 | 33.5 | 120 | 98 | M27.0*1.0 | |
| BBT30-GSK16-60 | 3.0-16.0 | 40 | 40.5 | 60 | 38 | M32.0*1.0 | |
| BBT30-GSK16-75 | 3.0-16.0 | 40 | 40.5 | 75 | 53 | M32.0*1.0 | |
| BBT30-GSK16-90 | 3.0-16.0 | 40 | 40.5 | 90 | 68 | M32.0*1.0 | |
| BBT30-GSK16-120 | 3.0-16.0 | 40 | 40.5 | 120 | 98 | M32.0*1.0 | |
| BBT30-GSK20-60 | 4.0-20.0 | 48 | 48.5 | 60 | 38 | M40.0*1.0 | |
| BBT30-GSK20-75 | 4.0-20.0 | 48 | 48.5 | 75 | 53 | M40.0*1.0 | |
| BBT30-GSK20-90 | 4.0-20.0 | 48 | 48.5 | 90 | 68 | M40.0*1.0 | |
| BBT30-GSK20-120 | 4.0-20.0 | 48 | 48.5 | 120 | 98 | M40.0*1.0 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner | 拆卸器Stripper |
| GSK10 | HN-GSK10 | SK10 | GH27 | CX10 |
| GSK13 | HN-GSK13 | SK13 | GH33 | CX13 |
| GSK16 | HN-GSK16 | SK16 | GH40 | CX16 |
| GSK20 | HN-GSK20 | SK20 | GH48 | CX20 |
BBT40-GSK高速刀柄BBT40-GSK High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT40-GSK10-60 | 3.0-10.0 | 27.1 | 27.6 | 60 | 33 | M21.5*1.0 | |
| BBT40-GSK10-75 | 3.0-10.0 | 27.1 | 27.6 | 75 | 48 | M21.5*1.0 | |
| BBT40-GSK10-90 | 3.0-10.0 | 27.1 | 27.6 | 90 | 63 | M21.5*1.0 | |
| BBT40-GSK10-120 | 3.0-10.0 | 27.1 | 27.6 | 120 | 93 | M21.5*1.0 | |
| BBT40-GSK10-150 | 3.0-10.0 | 27.1 | 27.6 | 150 | 123 | M21.5*1.0 | |
| BBT40-GSK13-60 | 3.0-13.0 | 33 | 33.5 | 60 | 33 | M27.0*1.0 | |
| BBT40-GSK13-75 | 3.0-13.0 | 33 | 33.5 | 75 | 48 | M27.0*1.0 | |
| BBT40-GSK13-90 | 3.0-13.0 | 33 | 33.5 | 90 | 63 | M27.0*1.0 | |
| BBT40-GSK13-120 | 3.0-13.0 | 33 | 33.5 | 120 | 93 | M27.0*1.0 | |
| BBT40-GSK13-150 | 3.0-13.0 | 33 | 33.5 | 150 | 123 | M27.0*1.0 | |
| BBT40-GSK16-60 | 3.0-16.0 | 40 | 40.5 | 60 | 33 | M32.0*1.0 | |
| BBT40-GSK16-75 | 3.0-16.0 | 40 | 40.5 | 75 | 48 | M32.0*1.0 | |
| BBT40-GSK16-90 | 3.0-16.0 | 40 | 40.5 | 90 | 63 | M32.0*1.0 | |
| BBT40-GSK16-120 | 3.0-16.0 | 40 | 40.5 | 120 | 93 | M32.0*1.0 | |
| BBT40-GSK16-150 | 3.0-16.0 | 40 | 40.5 | 150 | 123 | M32.0*1.0 | |
| BBT40-GSK20-60 | 4.0-20.0 | 48 | 48.5 | 60 | 33 | M40.0*1.0 | |
| BBT40-GSK20-75 | 4.0-20.0 | 48 | 48.5 | 75 | 48 | M40.0*1.0 | |
| BBT40-GSK20-90 | 4.0-20.0 | 48 | 48.5 | 90 | 63 | M40.0*1.0 | |
| BBT40-GSK20-120 | 4.0-20.0 | 48 | 48.5 | 120 | 93 | M40.0*1.0 | |
| BBT40-GSK20-150 | 4.0-20.0 | 48 | 48.5 | 150 | 123 | M40.0*1.0 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner | 拆卸器Stripper |
| GSK10 | HN-GSK10 | SK10 | GH27 | CX10 |
| GSK13 | HN-GSK13 | SK13 | GH33 | CX13 |
| GSK16 | HN-GSK16 | SK16 | GH40 | CX16 |
| GSK20 | HN-GSK20 | SK20 | GH48 | CX20 |
BBT50-GSK高速刀柄BBT50-GSK High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | M | 备注Note |
| BBT50-GSK10-105 | 3.0-10.0 | 27.1 | 27.6 | 67 | 33 | M21.5*1.0 | |
| BBT50-GSK10-135 | 3.0-10.0 | 27.1 | 27.6 | 97 | 48 | M21.5*1.0 | |
| BBT50-GSK10-165 | 3.0-10.0 | 27.1 | 27.6 | 127 | 63 | M21.5*1.0 | |
| BBT50-GSK13-105 | 3.0-13.0 | 33 | 33.5 | 67 | 93 | M27.0*1.0 | |
| BBT50-GSK13-135 | 3.0-13.0 | 33 | 33.5 | 97 | 123 | M27.0*1.0 | |
| BBT50-GSK13-165 | 3.0-13.0 | 33 | 33.5 | 127 | 33 | M27.0*1.0 | |
| BBT50-GSK16-105 | 3.0-16.0 | 40 | 40.5 | 67 | 48 | M32.0*1.0 | |
| BBT50-GSK16-135 | 3.0-16.0 | 40 | 40.5 | 97 | 63 | M32.0*1.0 | |
| BBT50-GSK16-165 | 3.0-16.0 | 40 | 40.5 | 127 | 93 | M32.0*1.0 | |
| BBT50-GSK16-200 | 3.0-16.0 | 40 | 40.5 | 162 | 123 | M32.0*1.0 | |
| BBT50-GSK20-105 | 4.0-20.0 | 48 | 48.5 | 67 | 33 | M40.0*1.0 | |
| BBT50-GSK20-135 | 4.0-20.0 | 48 | 48.5 | 97 | 48 | M40.0*1.0 | |
| BBT50-GSK20-165 | 4.0-20.0 | 48 | 48.5 | 127 | 63 | M40.0*1.0 | |
| BBT50-GSK20-200 | 4.0-20.0 | 48 | 48.5 | 162 | 93 | M40.0*1.0 | |
| BBT50-GSK25-105 | 6.0-25.0 | 55 | 55.5 | 67 | 63 | M45.0*1.0 | |
| BBT50-GSK25-135 | 6.0-25.0 | 55 | 55.5 | 97 | 93 | M45.0*1.0 | |
| BBT50-GSK25-165 | 6.0-25.0 | 55 | 55.5 | 127 | 93 | M45.0*1.0 | |
| BBT50-GSK25-200 | 6.0-25.0 | 55 | 55.5 | 162 | 93 | M45.0*1.0 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner | 拆卸器Stripper |
| GSK10 | HN-GSK10 | SK10 | GH27 | CX10 |
| GSK13 | HN-GSK13 | SK13 | GH33 | CX13 |
| GSK16 | HN-GSK16 | SK16 | GH40 | CX16 |
| GSK20 | HN-GSK20 | SK20 | GH48 | CX20 |
HSK63A-GSK高速刀柄HSK63A-GSK High Speed Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | 备注Note |
| HSK63A-GSK10-70 | 3.0-10.0 | 27.1 | 27.6 | 44 | 70 | |
| HSK63A-GSK10-100 | 3.0-10.0 | 27.1 | 27.6 | 74 | 100 | |
| HSK63A-GSK10-150 | 3.0-10.0 | 27.1 | 27.6 | 124 | 150 | |
| HSK63A-GSK13-70 | 3.0-13.0 | 33 | 33.5 | 44 | 70 | |
| HSK63A-GSK13-100 | 3.0-13.0 | 33 | 33.5 | 74 | 100 | |
| HSK63A-GSK13-150 | 3.0-13.0 | 33 | 33.5 | 124 | 150 | |
| HSK63A-GSK16-75 | 3.0-16.0 | 40 | 40.5 | 44 | 70 | |
| HSK63A-GSK16-100 | 3.0-16.0 | 40 | 40.5 | 74 | 100 | |
| HSK63A-GSK16-150 | 3.0-16.0 | 40 | 40.5 | 124 | 150 | |
| HSK63A-GSK20-100 | 4.0-20.0 | 48 | 48.5 | 74 | 100 | |
| HSK63A-GSK20-150 | 4.0-20.0 | 48 | 48.5 | 124 | 150 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner | 拆卸器Stripper |
| GSK10 | HN-GSK10 | SK10 | GH27 | CX10 |
| GSK13 | HN-GSK13 | SK13 | GH33 | CX13 |
| GSK16 | HN-GSK16 | SK16 | GH40 | CX16 |
| GSK20 | HN-GSK20 | SK20 | GH48 | CX20 |
ER弹性刀柄系列ER Elasticity Handle Series
刀柄预设动平衡 G6.3 15000RPM
BBT50-M螺纹连接刀柄(斜柄) BBT50-M Threaded Handle(Taper shank)
命名规则
Naming Rule
30
16
主轴形式
主轴大小
弹性刀柄系统
ER Elasticity Handle System
主要特点
Main Features
主要用于套式平面铣刀盘的装夹，采用中间心轴和两边定位键定位，端面内六角螺丝锁紧。
Using Central Screw And Side Positioning Keys To Fastening Cutting,hexagon
Screw Is Used For Fixing Chuck And Cutter
BBT30-ER弹性刀柄BBT30-ER Elasticity Handle
相应配件Accessories
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | 备注Note |
| BBT30-ER16-70 | 3.0-10.0 | 28 | 28 | 70 | 48 | |
| BBT30-ER16-100 | 3.0-10.0 | 28 | 28 | 100 | 78 | |
| BBT30-ER20-70 | 3.0-13.0 | 34 | 34 | 70 | 48 | |
| BBT30-ER20-100 | 3.0-13.0 | 34 | 34 | 100 | 78 | |
| BBT30-ER25-70 | 3.0-16.0 | 42 | 42 | 70 | 48 | |
| BBT30-ER25-100 | 3.0-16.0 | 42 | 42 | 100 | 78 | |
| BBT30-ER32-70 | 3.0-20.0 | 50 | 50 | 70 | 48 | |
| BBT30-ER32-100 | 3.0-20.0 | 50 | 50 | 100 | 78 |
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner |
| ER16 | HN-ER16A | ER16 | HS-ER16A |
| ER20 | HN-ER20A | ER20 | HS-ER20A |
| ER25 | HN-ER25UM | ER25 | HS-ER25UM |
| ER32 | HN-ER32UM | ER32 | HS-ER32UM |
BBT40-ER 弹性刀柄BBT40-ER Elasticity Handle
相应配件Accessories
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | 备注Note |
| BBT40-ER16-70 | 3.0-10.0 | 28 | 28 | 70 | 43 | |
| BBT40-ER16-100 | 3.0-10.0 | 28 | 28 | 100 | 73 | |
| BBT40-ER16-150 | 3.0-10.0 | 28 | 28 | 150 | 123 | |
| BBT40-ER20-70 | 3.0-13.0 | 34 | 34 | 70 | 43 | |
| BBT40-ER20-100 | 3.0-13.0 | 34 | 34 | 100 | 73 | |
| BBT40-ER20-150 | 3.0-13.0 | 34 | 34 | 150 | 123 | |
| BBT40-ER25-70 | 3.0-16.0 | 42 | 42 | 70 | 43 | |
| BBT40-ER25-100 | 3.0-16.0 | 42 | 42 | 100 | 73 | |
| BBT40-ER25-150 | 3.0-16.0 | 42 | 42 | 150 | 123 | |
| BBT40-ER32-70 | 3.0-20.0 | 50 | 50 | 70 | 43 | |
| BBT40-ER32-100 | 3.0-20.0 | 50 | 50 | 100 | 73 | |
| BBT40-ER32-150 | 3.0-20.0 | 50 | 50 | 150 | 123 |
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner |
| ER16 | HN-ER16A | ER16 | HS-ER16A |
| ER20 | HN-ER20A | ER20 | HS-ER20A |
| ER25 | HN-ER25UM | ER25 | HS-ER25UM |
| ER32 | HN-ER32UM | ER32 | HS-ER32UM |
BBT50-ER弹性刀柄BBT50-ER Elasticity Handle
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | 备注Note |
| BBT50-ER16-100 | 3.0-10.0 | 28 | 28 | 100 | 62 | |
| BBT50-ER16-150 | 3.0-10.0 | 28 | 28 | 150 | 112 | |
| BBT50-ER20-100 | 3.0-13.0 | 34 | 34 | 100 | 62 | |
| BBT50-ER20-150 | 3.0-13.0 | 34 | 34 | 150 | 112 | |
| BBT50-ER25-100 | 3.0-16.0 | 42 | 42 | 100 | 62 | |
| BBT50-ER25-150 | 3.0-16.0 | 42 | 42 | 150 | 112 | |
| BBT50-ER32-100 | 3.0-20.0 | 50 | 50 | 100 | 62 | |
| BBT50-ER32-150 | 3.0-20.0 | 50 | 50 | 150 | 112 |
相应配件Accessories
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner |
| ER16 | HN-ER16A | ER16 | HS-ER16A |
| ER20 | HN-ER20A | ER20 | HS-ER20A |
| ER25 | HN-ER25UM | ER25 | HS-ER25UM |
| ER32 | HN-ER32UM | ER32 | HS-ER32UM |
HSK63A-ER弹性刀柄HSK63A-ER Elasticity Handle
相应配件Accessories
| 型号Designation | 把握直径ClampingRange | D1 | D2 | L1 | L2 | 备注Note |
| HSK63A-ER16-70 | 3.0-10.0 | 28 | 28 | 70 | 44 | |
| HSK63A-ER16-100 | 3.0010.0 | 28 | 28 | 100 | 74 | |
| HSK63A-ER16-150 | 3.0010.0 | 28 | 28 | 150 | 124 | |
| HSK63A-ER20-70 | 3.0013.0 | 34 | 34 | 70 | 44 | |
| HSK63A-ER20-100 | 3.0013.0 | 34 | 34 | 100 | 74 | |
| HSK63A-ER20-150 | 3.0-13.0 | 34 | 34 | 150 | 124 | |
| HSK63A-ER25-70 | 3.0-16.0 | 42 | 42 | 70 | 44 | |
| HSK63A-ER25-100 | 3.0-16.0 | 42 | 42 | 100 | 74 | |
| HSK63A-ER25-150 | 3.0-16.0 | 42 | 42 | 150 | 124 | |
| HSK63A-ER32-70 | 3.0-20.0 | 50 | 50 | 70 | 44 | |
| HSK63A-ER32-100 | 3.0-20.0 | 50 | 50 | 100 | 74 | |
| HSK63A-ER32-150 | 3.0-20.0 | 50 | 50 | 150 | 124 |
| 型号Designation | 螺帽Nut | 筒夹Collet | 扳手Spanner |
| ER16 | HN-ER16A | ER16 | HS-ER16A |
| ER20 | HN-ER20A | ER20 | HS-ER20A |
| ER25 | HN-ER25UM | ER25 | HS-ER25UM |
| ER32 | HN-ER32UM | ER32 | HS-ER32UM |
强力刀柄系列Powerful Handle Series
多排滚针紧密排列，增强把握力
强力刀柄 Powerful Handle
命名规则
Naming Rule
C 强力刀柄
C Powerful Handle
主要特点
Main Features
内设开油槽，配合直身筒夹增强抗震性/-196°超深冷处理，防止变形/重切削兼顾半精加工 With Internal Oil Groove And Straight Shank Collet,higher Shock Resistance/Cryogenic Treatment Under-196° c, Avoid Deformation/ Suitable For Heavy Cutting And Semiprecision Machining
BBT30/40/50-C强力刀柄 BBT30/40/50-CPowerfulHandle
| 型号Designation | D1 | D2 | L1 | L2 | 备注Note |
| BBT30-C20-90 | 20 | 55 | 90 | 70 | |
| BBT30-C25-90 | 25 | 58 | 90 | 70 | |
| BBT30-C32-105 | 32 | 68 | 105 | 85 |
| 型号Designation | D1 | D2 | L1 | L2 | 备注Note |
| BBT40-C20-90 | 20 | 55 | 90 | 65 | |
| BBT40-C25-90 | 25 | 58 | 90 | 65 | |
| BBT40-C32-105 | 32 | 68 | 105 | 85 | |
| BBT40-C32-135 | 32 | 68 | 135 | 110 | |
| BBT40-C32-150 | 32 | 68 | 150 | 125 |
| 型号Designation | D1 | D2 | L1 | L2 | 备注Note |
| BBT50-C20-90 | 20 | 55 | 90 | 55 | |
| BBT50-C25-90 | 25 | 58 | 90 | 55 | |
| BBT50-C32-105 | 32 | 68 | 105 | 70 | |
| BBT50-C32-135 | 32 | 68 | 135 | 100 | |
| BBT50-C32-165 | 32 | 68 | 150 | 130 |
HSK63A-C强力刀柄HSK63A-C Powerful Handle
| 型号Designation | D1 | D2 | L1 | L2 | 备注Note |
| HSK63A-C20-100 | 20 | 55 | 100 | 48 | |
| HSK63A-C25-100 | 25 | 58 | 100 | 48 | |
| HSK63A-C32-110 | 32 | 68 | 110 | 58 |
相应配件Accessories
| 型号Designation | 筒夹Collet | 扳手Spanner |
| C20 | C20 | HS-C20 |
| C25 | C25 | HS-C25 |
| C32 | C32 | HS-C32 |
平面刀柄系列Face Milling Handle Series
多排滚针紧密排列，增强把握力
