该页无缩略图
汽车应急启动;AGM铅酸电池;QC3.0及PD45W快充;LED灯；LCD显示;低温加热;电压检测；
八重安全保护;便携收纳。
Jumpstarting,AGMlead-acidbattery,QC3.0&PD45Wfastcharging,LEDlight,LCDdisplay low-temp heating,voltagedetection,8safety protections,portable&storage.
汽车应急启动 JumpStarter
1 / 100%12.0 自 220
AGM铅酸电池AGMLeadAcid Battery
LCD智能显示 LCDSmart Display
电压检测VoltageDetection
低温加热 Low-Temp Heating
适用汽油/柴油 Gasoline/Diesel
八重安全保护8SafetyProtections
手机/数码充电ChargesPhones&Devices
可选配件 Optional Accessories
PRODUCTPARAMETERS 产品参数
| 型号 Model | JSX-12.22 |
| 容量 Capacity | 22000mAh |
| 输出 Output | QC3.0;DC12V/10A;PD45W;12VJumpStarter |
| 输ut | PD45W |
| startig/peacurrent | 750A/1500A |
| Applable Displacement | Petrol |
| 产品ut size | 318X222.5X420mm |
汽车应急启动;AGM铅酸电池,28Ah大容量;QC3.0及PD45W快充;低温加热;电压检测;LCD智能显示；
八重安全保护；便携收纳。
Jumpstarting,AGMlead-acidbatterywith28Ahcapacity，QC3.0& PD45Wfastcharging,low-tempheating,voltagedetection,LCDsmart display,8safety protections,portable&storage.
宏 100 20 AGM 茶 C ? U 、
汽车应急启动 大电流启动 LCD智能显示 AGM铅酸电池 电压检测 低温加热 八重安全保护 手机/数码充电
JumpStarter HighCurrent LCDSmart AGM Lead Voltage Low-Temp 8Safety ChargesPhones Starting Display Acid Battery Detection Heating Protections &Devices
可选配件 OptionalAccessories
PRODUCTPARAMETERS 产品参数
Y
2合1USB数据线
2-in-1USBcable
Q
Type-C数据线Type-Ccable?
| 型号 Model | JSL-12.28 |
| 容量 Capacity | 28000mAh(103.6Wh) |
| 输utput | QC3.0;DC12V/10A;PD45W;12VJumpStarter |
| 输put | PD45W |
| startig/peacurrent | 900A/1800A |
| Applcable Dsplacement | Petrol10.0L(12V) |
| 包a装尺 Size | 535X415X330mm/13.9KG |
DC转Type-C线 DCtoType-CCable
汽车应急启动;12V/24V双电压;AGM铅酸电池，22Ah\*2大容量;QC3.0及PD65W快充;LED工作灯；低温加热;电压检测;适用12V/24V车辆；2000次循环；八重安全保护；宽温工作。
Jump starting,12V/24V voltage,AGMbattery,22Ah\*2 capacity, wide temp range.
B昌 100% 12.0v 二 + \* 9220V AGM 个 42 ↓二 1
汽车应急启动 LCD智能显示 AGM铅酸电池 电压检测 低温加热 适用汽油/柴油 八重安全保护 手机/数码充电
JumpStarter LCD smart AGMLetdy Dotction Low-Temp Heating Gasoline/Diesel ProSections CharDesPhones
可选配件 OptionalAccessories
PRODUCTPARAMETERS 产品参数
Y
2-in-1USBcable
Q
Type-C数据线Type-Ccable
?
DC转Type-C线 DCtoType-CCable
| 型号 Model | JSC-24.22 |
| 容量 Capacity | 44000mAh (162.8Wh) |
| output | QC3.0; DC12V/10A; PD45W;12V/24VJump Starter |
| 输ut | PD45W |
| 启动/峰值电流 Starting/Peakcurrent | 1500A/3000A(12V) 750A/1500A(24V) |
| Applcable Dsplacement | Petrol10.0L(12V)/Diesel10.0L(24V) |
| 包装g Size | 535X415X330mm/14.9KG |
LA AUTOMOTIVE JUMP STARTER
汽车应急启动；电源逆变器；150PSI气泵，可为轮胎及配件充气;LED工作灯；双USB输出；双12V电源插座；
LCD数字显示；舒适手柄；反极性保护；充满电自停。
Jumpstartingpowerinverter,5oPSlaircompressorfortiresndccessories,LEight, dual UsBoutput,dual 12Voutlets,LCDdisplaycomfortable handle,reverse polarity protection, auto shut-off when fully charged.
可选配件 OptionalAccessories
| PRODUCTPARAMETERS 产品参数 | ||
| 型号Model | JST-1250 | JST-1500 |
| 容量Capacity | 18000mAh(66.6Wh) | 22000mAh(81.4Wh) |
| 输出Output | Invterx2;Jt | InvBx22;ue |
| 输入Input | 15V/1A | 15V/1A |
| stitig/pacrrent | 625A/1250A | 750A/1500A |
| 适用排量 ApplicableDisplacement | Petrol | Petrol |
| Air Compressor | 150PSI | 150PSI |
| 包装尺/z/Weight | 345X260X333MM/8.8KG | 345X260X333MM/9.31KG |
汽车应急启动；电源逆变器；150PSI气泵，可为轮胎及配件充气；LED工作灯；双USB输出；双12V电源插座；
LCD数字显示；舒适手柄；反极性保护；充满电自停。
Jumpstarting,power inverter,5oPslaircompressorfortiresndaccessories,LDight, dual UsB output,dual12Voutlets,LCDdisplay,comfortable handle,reverse polarity protection, auto shut-off when fully charged.
日昌 宏
汽车应急启动 大电流启动
JumpStarter High Current Starting
DCAC 洗
电源逆变器 反充警报
Power Inverter Reverse Charging Alert
反极性保护 充满电自停
ReversePolarity Auto Shut-Off
Protection
气泵充气 手机/数码充电
AirCompressor Charges Phones &Devices
可选配件 OptionalAccessories
PRODUCTPARAMETERS 产品参数
| 型号Model | JSK-1250 |
| 容量Capacity | 18000mAh(66.6Wh) |
| 输出Output | DC12V1X10A; USB4X5V/2.4A; Inverter1X200W;12VJump Starter |
| 输入Input | 15V/1A |
| 电urrent | 1250A |
| plicable Displacement | Petrol |
| Air compressor | 150PSI |
| 包装尺/iz/Weight | 360x303x343mm/8.7KG |
汽车应急启动；260PSI气泵，可为轮胎及配件充气；双USB输出；12V点烟器插座；LED工作灯；反极性报警保护。
Jump starting,26oPSl aircompressor for tiresand accessories,dual USBoutput,l2V cigarette lighter socket, LED light, reverse polarityalarm protection.
可选配件 OptionalAccessories
PRODUCTPARAMETERS 产品参数
| 型号Model | JSE-600 |
| 容量Capacity | 18000mAh(66.6Wh) |
| 输出Output | DC12Vsocket;USB2X5V/2.1A;12VJumpStarter |
| 输入Input | DC12V |
| starting/peacurrent | 600A/1200A |
| Aplicable Displacement | Petrol |
| Aircompressor | 260PSI |
| 包装尺寸/重量 Package'Size/Weight | 388X298X386mm/12.75KG |
汽车应急启动(12V/24V)；强力弹簧夹持，夹紧不脱落；全绝缘加厚线缆，耐磨耐用；双USB输出；12V10A点烟器插座；彩灯电量显示；LED工作灯。
Jump starting (12v/24v),strong spring clamp with firm grip,fully insulated thick cable,dual USB output,12V10A socket,batterylevel indicator,LED work light.
汽车应急启动;100PSI气泵,30mm大缸径，可为轮胎及配件充气;强力弹簧夹;加厚绝缘线缆;双USB输出；
12V点烟器插座;LED工作灯；反极性报警保护。
Jump starting,l0oPsl air compressor with 30mm large cylinder,strong spring clamp,thick insulatedcable,dual UsBoutput,12Vsocket,LEDlight, reversepolarity alarm protection.
可选配件OptionalAccessories
| 型号Model | JSE-400 |
| 容量Capacity | 18000mAh(66.6Wh) |
| 输出Output | DC12Vsocket;USB2X5V/2.1A;12VJumpStarter |
| 输入Input | DC12V |
| ttinpeacurrent | 700A/1400A |
| 适用排量 ApplicableDisplacement | Petrol |
| Air Compressor | 100PSI |
| Pa装尺/iz/Weight | 375X234X386mm/10.35KG |
汽车应急启动；电源逆变器(200W)；150PSI气泵，可为轮胎及配件充气;强力弹簧夹;加厚绝缘线缆；双USB输出；12V电源插座；LED工作灯；舒适手柄。
Jumpstarting,20oW power inverter,15oPSl aircompressor for tires and accessories,strong spring clamp,thick insulated cable,dual UsB output,12V outlet, LED light, comfortable handle.
| PRODUCTPARAMETERS 产品参数 | |
| 型号Model | JSE-500 |
| 容量Capacity | 12000mAh(44.4Wh) |
| 输出Output | DC12V2X;USB5V/2.1A; Inverter200W;12VJumpStarter |
| 输入lnput | 5V/2.1A;15V/1A |
| 峰值urrent | 950A |
| Aplicable Displacement | Petrol |
| Air Compressor | 150PSl |
| 包装尺寸/iz/Weight | 475X365X335mm/12.35KG |
汽车应急启动;260PSI气泵，可为轮胎及配件充气;强力弹簧夹;加厚绝缘线缆;USB输出；
双12V点烟器插座;LED工作灯。
Jump starting,26oPslair compressor for tiresand accessories,strong spring clamp,thick insulated cable, USB output,dual 12Vsockets,LED work light.
可选配件 Optional Accessories
| PRODUCTPARAMETERS 产品参数 | |
| 型号Model | JSE-700 |
| 容量Capacity | 12000mAh(44.4Wh) |
| 输出Output | DC12V2X;USB5V/2.1A; Inverter200W;12VJumpStarter |
| 输入Input | 5V/2.1A; 15V/1A |
| 值电urrent | 950A |
| 适用排量 Applicable Displacement | Petrol |
| 气泵 AirCompressor | 150PSI |
| 包装尺寸/重量 PackageSize/Weight | 377X260X256mm/3.8KG |
汽车应急启动;260PSI气泵，可为轮胎及配件充气；强力弹簧夹；加厚绝缘线缆；USB输出；12V点烟器插座；
反极性报警保护。
Jumpstartingowerinverter,15oPslairompressorfortiresndccessories,light, dual UsBoutput,dual12Voutlets,LCDdisplay,comfortable handle,reverse polarity protection,auto shut-off when fully charged.
可选配件 Optional Accessories
| PRODUCTPARAMETERS 产品参数 | |
| 型号Model | JSE-450 |
| 容量Capacity | 18000mAh(66.6Wh) |
| 输出Output | DC12Vsocket;USB2X5V/2.1A;12VJumpStarter |
| 输入Input | DC12V |
| 峰urrent | 600A |
| 适用排量 ApplicableDisplacement | Petrol |
| Air Compressor | 260PSI |
| 包装尺寸/iz/Weight | 377X260X278mm/4.7KG |
AUTOMOTIVEJUMP STARTERACCESSORIES GEOSTAR
纯铜启动夹；智能安全夹(12V/1500A)，具备防火花、防短路、防反接、防过充、防反充、防过放保护;ABS铜充电夹，100A/200A/300A可选；适配澳标欧标/英标/阿根廷标等多国插头。
Pureopeii over-dischargeprotection,ABcoppercrgercmps (o0A/20A/3oA),multicountryACdapers.
铜电缆带启动夹具/CopperCablewithStarterClamps
电源适配器/ACAdapter
电源适配器/ACAdapter
电池充电器夹/BatteryChargerClamps
#kb
| Mdel | AC-115 | AC-116 | AC-117 | AC-118 |
| 详情 Details | 电池充电器夹ABS护套和铜导体100A BatteryChargerClamps Steel Cover&CopperConductor100A | 电池充电器夹ABS护套和铜导体200A BatteryChargerClamps ABSCover&Copper Conductor200A | 电池充电器夹ABS护套和铜导体300A BatteryChargerClamps Steel Cover&CopperConductor300A | 电池充电器夹ABS护套和铜导体200A BatteryChargerClamps Steel Cover&CopperConductor200A |
E 丝 W
| Mdel | AC-119 | AC-120 | AC-121 |
| 详情 Details | 电池充电器夹ABS护套和铜导体300A BatteryChargerClamps Steel Cover&CopperConductor300A | 电池充电器夹ABS护套和铜导体200A BatteryChargerClamps Steel Cover&CopperConductor200A | 电池充电器夹ABS护套和铜导体300A BatteryChargerClamps Steel Cover&Copper Conductor300A |
WELDING MACHINE
本产品是一款支持MMAPulSe+、普通MMA及LIFTTIG三种模式的逆变焊机,IGBT逆变技术、可调热起弧与推力电流，并内置VRD防触电及防粘保护能sdorce,withbuilt-in VRDanti-shockand anti-stick protection
三 88888888 Q0
MMA手工焊接 热起弧可调 电弧推力可调 防粘保护 VRD防触电 电流连续调节 多重保护 多焊条适配
MMA Stick Adjustable Adjustable Arc Anti-Stick VRD Safety Adjustable Multi Multiple Electrodes
Welding Hot-Start Force Protection Protection ContinuousCurrent Protection Compatibility
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | MMA-160G LED | MMA-200G LED |
| 输入电压/频率 Input Voltage/Freq. | 1×220V50/60Hz | 1×220V50/60Hz |
| Function | LIFT TIG/MMA | LIFT TIG / MMA |
| 最大输入电流 | 34A | 45A |
| 有效输入电流 I1eff | 18A | 25A |
| 10-160A | 10-200A | |
| 占载率 DutyCycle | 30%160A/60%113A/100%88A | 30%200A/60%141A/100%110A |
| 空载电压 | 80V | 80V |
| 焊条直径 ElectrodeO | 02.5,03.2，04.0mm | 02.5,03.2,04.0,05.0mm |
| 包装尺寸/产品净重 Size/Weight | 455X275X340mm/4KG | |
MMA INVERTERWELDER
GEOSTAR
本产品是一款支持MMAPulSe+、普通MMA及LIFTTIG三种模式的逆变焊机,IGBT逆变技术、可调热起弧与推力电流，并内置VRD防触电及防粘保护功能ispdbforce,withbuilt-in VRDanti-shock and anti-stick protection
國 888888888 VRD Q0
MMA手工焊接 热起弧可调 电弧推力可调 防粘保护 VRD防触电 电流连续调节 多重保护 多焊条适配
MMAStick Adjustable Adjustable Arc Anti-Stick VRD Safety Adjustable Multi Multiple Electrodes
Welding Hot-Start Force Protection Protection ContinuousCurrent Protection Compatibility
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
TIG焊枪 电焊钳 接地夹 TIG Welding Electrode Earth Torch Holder Clamp 焊接电缆 焊接焊帽 焊接手套 Welding Welding Welding Cable Helmet Gloves × 焊接围裙 焊渣清理刷 电焊敲渣锤 Welding Welding Wire Welding Chipping Apron Brush Hammer
| 型号 Model | MMA-160SLEDBV | MMA-200SLEDBV | ||
| 输入电压/频率 InputVoltage/Freq. | 1×110V50/60Hz | 1×220V50/60Hz | 1×110V50/60Hz | 1×220V50/60Hz |
| 功能 Function | LIFT TIG/ MMA | LIFT TIG/ MMA | LIFT TIG /MMA | LIFT TIG/ MMA |
| 最大输入电流 I1 max | 43A | 35A | 43A | 43A |
| 有效输入电流 | 33A | 19A | 33A | 24A |
| 输出电流范围 Output Range | 10-120A | 10-160A | 10-120A | 10-200A |
| DutyCyele | 60%120A/100%93A | 30% 160A/60% 113A/ | 60%120A/100%93A | 30% 200/1%6 141A/ |
| 空载电压 OCV | 80V | 80V | 80v | 80V |
| 02.5,03.2mm | 02.5,03.2,04.0,05.0mm | |||
| 包装尺寸/产品净重 Size/Weight | 455X275X340mm/4.5KG | |||
MMA INVERTERWELDER
GEOSTAR
本产品是一款支持MMAPulSe+、普通MMA及LIFTTIG三种模式的逆变焊机，IGBT逆变技术、可调热起弧与推力电流、协同MMA功能，并内置VRD防触电防粘dstartandarcforce,ynergicMAfunction,withuilt-inVanti-shockandanti-stickprotection.
山 國 Y Q0 808:88 MMA手工焊接 热起弧可调 电弧推力可调 防粘保护 VRD防触电 电流连续调节 多重保护 多焊条适配 MMA Stick Adjustable Adjustable Arc Anti-Stick VRD Safety Adjustable Multi Multiple Electrodes Welding Hot-Start Force Protection Protection ContinuousCurrent Protection Compatibility
可选配件OptionalAccessories
TIG焊枪 电焊钳 接地夹
TIG welding Electrode Earth torch Holder Clamp
9
焊接电缆 焊接焊帽 焊接手套
Welding Welding welding Cable Helmet Gloves ×
焊接围裙 焊渣清理刷 电焊敲渣锤
Welding Welding Wire Welding Chipping Apron Brush Hammer
PRODUCTPARAMETERS产品参数
| 型del | MMA-315S LED | MMA-350SLED |
| 输入电压/频率 InputVoltage/Freq. | 3X380V50/60Hz | 3X380V50/60Hz |
| 功能 Function | MMA | LIFT TIG/MMA |
| 最大输入电流 I1 max | 22A | LIFT TIG:18A MMA:25A |
| 有效输入电流 | 12A | LIFT TIG:10A MMA:14A |
| 输出电流范围 Output Range | 10-315A | 10-350A |
| 占载率 DutyCycle | 30%315A/60%223A/100%173A | 30%350A/60%247A/100%192A |
| 空载电压 | 66V | 68V |
| 焊条直径 ElectrodeO | 02.5,03.2,04.0，05.0，06.0mm | 02.5,03.2，04.0，05.0,06.0mm |
| 包装/尺寸/产品净重 | 455X275X340mm/11KG | 455X275X340mm/12.3KG |
本产品是一款支持单/双脉冲MIG、直流MIG、MMA及LIFTTIG四种工艺的多功能逆变焊机，协同/手动双控模式，适用于钢/不锈钢/铜硅/铝等多种材料焊接hispmodes,tel,es,i
W R 单/双脉冲 VRD防触电 薄板焊接 送丝可调 多焊条适配 Single/Dual Pulse Voltage Reduction Thin Metal AdjustableWireMultipleElectrodes Device Feed Compatibility
可选配件OptionalAccessories
TIG焊枪 MIG焊枪 电焊钳 TIGWelding MIG Welding Electrode Torch Torch Holder 9 家 焊接电缆 焊接焊帽 焊接手套 Welding Welding welding Cable Helmet Gloves 省 X 焊接围裙 电焊敲渣锤 welding Welding Wire Welding Chipping Apron Brush Hammer
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG-200ESLED | MIG-200ESLEDBV | |
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz | 1X110V50/60Hz | 1×220V50/60Hz |
| 功能 Function | MIG/LIFT TIG/MMA | MIG/LIFTTIG/MMA | MIG/LIFT TIG/MMA |
| 最大输入电流 I1 max | MIG:43A/TIG:32A MMA:37A | MIG:40A/TIG:30A MMA:34A | MIG:43A/TIG:32A MMA:37A |
| 有效输入电流 I1eff | MIG:19A/TIG:14A MMA:17A | MIG:22A/TIG:17A MMA:18A | MIG:19A/TIG:14A MMA:17A |
| 输出电流范围 Output Range | MIG:50-200A/TIG:10-200A MMA:10-160A | MIG:50-140A/TIG:10-140A MMA:10-110A | MIG:50-200A/TIG:10-200A MMA:10-160A |
| 占载率 DutyCycle | MIG/TIG:20%200A/60%115A/ 100%89A MMA:20%160A/60%92A/100%72A|MMA:30%110A/60%78A/100%60A|MMA:20%160A/60%92A/100%72A | MIG/TIG:30%140A/60%99A/ 100%77A | MIG/TIG:20%200A/60%115A/ 100%89A |
| 空载电压 OCV | MIG:50V/TIG:1-25V MMA:50V | MIG:50V/TIG:1-25V MMA:50V | MIG:50V/TIG:1-25V MMA:50V |
| 焊条直径 ElectrodeD | MIG:0.6-0.8-1.0mm MMA:02.5，03.2，04.0mm | MIG:0.6-0.8mm MMA:02.5,03.2mm | MIG:0.6-0.8-1.0mm MMA:02.5,03.2,04.0mm |
| 包装尺寸/产品净重 | 455X275X340mm/8.8KG | ||
本产品是一款支持单/双脉冲MIG、直流MIG、MMA及LIFTTIG四种工艺的多功能逆变焊机，配备4.3英寸彩色TFT大屏、协同/手动双控模式，适用于不锈钢/铜/soctsocserteepprtingeedprocesses, featuring a 4 . 3 ^ { * } full-colorsicreli
W 单/双脉冲 VRD防触电 薄板焊接 送丝可调 多焊条适配 Single/Dual PulseVoltage Reduction Thin Metal AdjustableWireMultipleElectrodes Device Feed Compatibility
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
?
TIG焊枪 MIG焊枪 电焊钳
TIG Welding MIGWelding Electrode Torch Torch Holder 家
单/双送丝轮 焊接焊帽 焊接手套
Single/Dual Feed Welding Welding Rollers Helmet Gloves X H
焊接围裙 电焊敲渣锤
Welding Welding Wire Welding Chipping Apron Brush Hammer
| 型号 Model | MIG-200SPLCD | MIG-200SPLCD PRO |
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz | |
| Function | MIG/LIFT TIG/MMA | |
| 最大输入电流 I1 max | MIG:40A/TIG:30A/MMA:34A | |
| 有效输入电流 I1eff | MIG:22A/TIG:17A/MMA:24A | |
| outp | MIG:30-200A/TIG:10-200A/MMA:10-200A | |
| 占载率 DutyCycle | 30%200A/60%141A/100%110A | |
| 空载电压 OCV | MIG:64V/TIG:1-25V/MMA:64V | |
| 焊条直径 Electrode@ | MIG:(STEELPULSE:0.8/0.9/1.0mmDC:0.8/0.9/1.0mm)(SSPULSE:0.8/0.9/1.0mm)(CUSIPULSE:0.8/0.9/ 1.0mm)(ALSIPULSE:0.9/1.0/1.2mm)(ALMG PULSE:0.9/1.0/1.2mm) MMA:02.5,03.2,04.0,05.0mm | |
| 包装e尺寸/产品净重 | 455X275X340mm/12.2KG | 455X275X340mm/14KG |
TIG INVERTER WELDER
GEOSTAR
本产品是一款交直流TIG逆变焊机，支持正常/混合AC/DC、高频/冷/提拉起弧TIG及MMA五种工艺，配备4.3英寸彩色大屏、MCU+IGBT技术，适用于钢/不锈钢/铜/料spctis/erterderpprtiiA/HCFdfeaturinga4.3"full-colorLCDdisplay,MCU ^ + IGBTtecoyesfel,s
W RD 单/双脉冲 VRD防触电 薄板焊接 送丝可调 多焊条适配 Single/Dual PulseVoltage Reduction Thin Metal AdjustableWireMultiple Electrodes Device Feed Compatibility
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
书 电焊钳 TIG焊枪 接地夹 Electrode TIG Welding Earth Holder Torch Clamp 9 M 焊接电缆 焊接焊帽 焊接手套 Welding Welding Welding Cable Helmet Gloves 焊接围裙 X 电焊敲渣锤 welding Welding Wire Welding Chipping Apron Brush Hammer
| 型号 Model | TIG-200SPAC/DCLCD | TIG-200SPAC/DCLCDBV | |
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz | 1×110V 50/60Hz | 1×220V50/60Hz |
| 功能 Function | TIG/MMA | TIG/MMA | TIG/MMA |
| 最大输入电流 I1 max | TIG:37A/MMA:51A | TIG:37A/MMA:43A | TIG:37A/MMA:51A |
| 有效输入电流 l1eff | TIG:20A/MMA:23A | TIG:23A/MMA:27A | TIG:20A/MMA:23A |
| 输出电流范围 Output Range | 10-200A | TIG:10-145A/MMA:10-120A | 10-200A |
| 占载率 DutyCycle | TIG:30%200A/60%141A/100%110A MMA:20%200A/60%115A/100%89A | TIG:40%145A/60%118A/100%92A MMA:40% 120A/60% 98A/100% 76A | TIG:30%200A/60%141A/100%110A MMA:20%200A/60%115A/100%89A |
| 空载电压 OCV | 68V | 68V | 68V |
| 焊条直径 ElectrodeO | 02.5,03.2，04.0,05.0mm | 02.5,03.2mm | 02.5,03.2，04.0,05.0mm |
| 包装e尺寸/产品净重 | 455X275X340mm/12.2KG | ||
INVERTER PLASMA CUTTER
本产品是一款支持等离子切割与网格切割的逆变切割机，IGBT逆变技术、非高频引弧及引导弧，适用于金属板材切割作业。
hispruci uitable formetal sheet cutting applications.
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | CUT-40LED | CUT-40 LED BV | |
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz | 1×110V50/60Hz | 1×220V50/60Hz |
| Function | cut | cut | cut |
| 最大输入电流 | 34A | 37A | 34A |
| 有效输入电流 | 19A | 20A | 19A |
| outpn | 20-40A | 20-30A | 20-40A |
| 占载率 DutyCycle | 35%40A，60%28A,100%22A | 35%30A，60%21A，100%16A | 35%40A,60%28A，100%22A |
| 空载电压 OCV | 290V | 290V | 290V |
| Cuting Thickness | |||
| 包装e尺寸/产品净重 | 455X275X340mm/6.1KG | ||
INVERTER PLASMA CUTTER
GEOSTAR
本产品是一款支持等离子切割与网格切割的多电压逆变切割机，IGBT逆变技术、非高频引弧及引导弧，最大切割厚度 4 0mm ，支持CNC连接，适用于金属板材切割作业parcignitionwithpilotarc,40mmmaxcutingthicknessandCNCconnectionreadyformetalseetcutingapplications.
配备4.3寸TFT显示屏 Equipped witha 4.3"TFTcolor display
可选配件OptionalAccessories
S ￥ 电缆快插 等离子切割枪 接地夹 Quick MIG welding Earth Connector torch Clamp 延长电缆/气管 切割面罩 耐高温手套 Extension Cable/ Face HeatProtection Hose Shield Gloves X 防护围裙 焊渣清理刷 电焊敲渣锤 welding Welding Wire Welding Chipping Apron Brush Hammer
PRODUCTPARAMETERS产品参数
| 型del | CUT-60JLEDBV | ||
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz | 3X220V50/60Hz | 3X380V50/60Hz |
| Function | cut | cut | cut |
| 最大输入电流 | 42A | 25A | 11A |
| 有效输入电流 | 23A | 14A | 6A |
| 输utputR范围 | 20-50A | 20-60A | 20-60A |
| 占载率 DutyCycle | 30%50A,60%35A,100%27A | 30%60A,60%42A,100%33A | 30%60A，60%42A,100%33A |
| 空载电压 OCV | 365V | 365V | 295V |
| Cuting Thickness | |||
| 包装尺寸/产品净重 | 455X275X340mm/13.6KG | ||
本产品是一款电容储能螺柱焊机，采用高频逆变技术，瞬时放电焊接，适用于精密工业领域的螺柱紧固焊接作业。
hisprouctiii asteningwelding inprecision industrial applications.
耿
瞬时放电
InstantCapacitive
Discharge
高频逆变技术High-FrequencyInverterTechnology
多材料兼容Multi-MaterialCompatibility
智能高效运行 IntelligentHigh-Efficiency Operation
模块化耐用设计Modular&DurableDesign
多重保护
Overheat&Overload
Protection
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
T
专用焊枪
Stud Welding
Gun
螺柱夹头 Collet Chuck
接地夹 Earth Clamp
| 型号 Model | RSR-2500 |
| 输入电压/频率 InputVoltage/Freq. | AC220V±10%50/60Hz |
| 额定储能 RatedStorage Energy | 2500J |
| 焊e接edStudDiameter | 3~8mm |
| 焊接dedPlate Thickness | 0.2~2.0mm |
| 电容量 Capacitor Capacity | 119000μF |
| 生产率 Productivity | 15~30apm |
| r电压g voltage | 30~200V |
| Proection Level | IP21S |
| 包装尺寸/产品净重 Size/Weight | 455X275X340mm/6KG |
9
焊接电缆 Welding Cable
焊接焊帽 Welding Helmet
家
焊接手套 Welding Gloves
MIG INVERTER WELDER
GEOSTAR
本产品是一款协同/手动控制MIG逆变焊机，支持MIG、MMA及LIFTTIG三种工艺，配备7英寸彩色大屏、四辊送丝系统，适用于钢/不锈钢/铜硅/铝等多种材料焊displayd4-rollerirederitableorteel,tiness,usiuminumde.
茶
双控模式Synergic/ManualMode
热起弧可调 Adjustable Hot-Start
四辊送丝4-Roller Feeder
多电压输入Multi-Voltage
三工艺合一3-in-1Processes
2T/4T模式
2T/4TMode&Adjustable
Post-Gas
VRD防触电 VoltageReductionDevice
可选配件OptionalAccessories
TIG焊枪 MIG焊枪 电焊钳 TIG Welding MIG Welding Electrode Torch Torch Holder 焊接电缆 焊接焊帽 焊接手套 Welding Welding Welding Cable Helmet Gloves ? X 焊接围裙 电焊敲渣锤 Welding Welding Wire Welding Chipping Apron Brush Hammer
配备7寸TFT彩色显示屏 Equippedwitha7"TFTcolor display
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG-300YNLCD | MIG-300YNLCDBV | |||
| 输入电压/频率 Input Voltage/Freq. | 3×380V50/60Hz | 1×220V50/60Hz | 3×220V50/60Hz | 3×380V50/60Hz | 3X440V50/60Hz |
| 功能 Function | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA |
| 最大输入电流 I1 max | MIG:22A/LIFTTIG:16A MMA:19A | MIG:58A/TIG:43A MMA:55A | MIG:31A/TIG:23A MMA:26A | MIG:25A/TIG:19A MMA:21A | MIG:23A/TIG:17A MMA:20A |
| 有效输入电流 lleff | MIG:17A/LIFTTIG:12AMIG:45A/TIG:34A MMA:15A | MMA:55A | MIG:24A/TIG:18A MMA:26A | MIG:19A/TIG:15A MMA:16A | MIG:18A/TIG:13A MMA:15A |
| 输出电流范围 Output Range | MIG:50-300A LIFTTIG:10-300A | MIG:50-250A LIFTTIG:10-250A | MIG:50-300A LITTIG10300A | MIG:50-300A LIFTTIG:10-300A | MIG:50-300A LIFTTIG:10-300A |
| DutyCycle | |||||
| 空载电压 | 55V | 55V | 55V | 78V | 88V |
| MIG:0.8-1.0-1.2mmMMA:02.5，03.2，04.0,05.0mm | |||||
| 包装尺寸/产品净重 Size/Weight | 455X275X340mm 40KG | 455X275X340mm/42KG | |||
MIG INVERTER WELDER
GEOSTAR
本产品是一款支持单/双脉冲MIG、直流MIG、MMA及LIFTTIG四种工艺的多功能逆变焊机，配备7英寸彩色大屏、协同/手动双控模式及四辊送丝系统，适用于钢/siorp
茶
双控模式Synergic/Manual Mode
热起弧可调 Adjustable Hot-Start
65
四辊送丝4-Roller Feeder
多电压输入Multi-Voltage
三工艺合一3-in-1Processes
2T/4T模式
2T/4TMode&Adjustable
Post-Gas
VRD防触电 Voltage Reduction Device
可选配件OptionalAccessories
TIG焊枪 MIG焊枪 电焊钳 TIGWelding MIG Welding Electrode Torch Torch Holder 9 焊接电缆 焊接焊帽 焊接手套 Welding welding Welding Cable Helmet Gloves 焊接围裙 X 电焊敲渣锤 Welding Welding Wire WeldingChippin! Apron Brush Hammer
配备7寸TFT彩色显示屏 Equipped witha7"TFTcolor display
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG-300PN LCD BV | |||
| 输入电压/频率 InputVoltage/Freq. | 1X220V50/60Hz | 3X220V50/60Hz | 3X380V50/60Hz | 3X440V50/60Hz |
| 功能 Function | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA |
| 最大输入电流 I1max | MIG:58A/TIG:43A MMA:55A | MIG:31A/TIG:23A MMA:26A | MIG:25A/TIG:19A MMA:21A | MIG:23A/TIG:17A MMA:20A |
| 有效输入电流 I1eff | MIG:45A/TIG:34A MMA:55A | MIG:24A/TIG:18A MMA:26A | MIG:19A/TIG:15A MMA:16A | MIG:18A/TIG:13A MMA:15A |
| utp范 | ||||
| 占载率 DutyCycle | MIG/TIG:60%250A/10 0%194A MMA:100% 220A | MIG/TIG:60%300A/10 0%232AMMA:100% 250A | MIG/TIG:60%300A/10 0%232AMMA:60% 250A/100%194A | MIG/TIG:60% 300A/10 0%232AMMA:60% 250A/100%194A |
| 空载电压 OCV | MIG/MMA:66V LIFT TIG:1-25V | MIG/MMA:66V LIFT TIG:1-25V | MIG/MMA:78V LIFT TIG:1-25V | MIG/MMA:88V LIFT TIG:1-25V |
| MIG:0.8-1.0-1.2mmMMA:02.5,03.2，04.0,05.0mm | ||||
| 包装尺寸/产品净重 Size/Weight | 455X275X340mm/42.5KG | |||
MIG INVERTER WELDER
GEOSTAR
本产品是一款支持单/双脉冲MIG、直流MIG、MMA及LIFTTIG四种工艺的多功能逆变焊机,配备7英寸彩色大屏、协同/手动双控模式及四辊送丝系统，适用于钢/铜spuctitpsteerpprtiieubee
四
单/双脉冲Pulse DoublePulse
热起弧可调 Adjustable Hot-Start
四辊送丝4-Roller Feeder
多电压输入Multi-Voltage
三工艺合一3-in-1Processes
2T/4T模式
2T/4TMode&Adjustable
Post-Gas
VRD防触电 Voltage Reduction Device
可选配件OptionalAccessories
TIG焊枪 MIG焊枪 电焊钳 TIG Welding MIG Welding Electrode Torch Torch Holder 焊接电缆 焊接焊帽 焊接手套 Welding Welding Welding Cable Helmet Gloves 省 X 焊接围裙 焊渣清理刷 电焊敲渣锤 Welding Welding Wire Welding Chipping Apron Brush Hammer
配备7寸TFT彩色显示屏 Equipped witha7"TFTcolor display
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG-350WYNLCD | MIG-350WYNLCDBV | |||
| 输入电压/频率 InputVoltage/Freq. | 3×380V50/60Hz | 1×220V50/60Hz | 3×220V50/60Hz | 3×380V50/60Hz | 3×440V50/60Hz |
| 功能 Function | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA |
| 最大输入电流 I1 max | MIG:27A/TIG:20A MMA:23A | MIG:58A/TIG:46A MMA:64A | MIG:39A/TIG:30A MMA:32A | MIG:25A/TIG:19A MMA:21A | MIG:23A/TIG:17A MMA:20A |
| 有效输入电流 I1eff | MIG:21A/TIG:15A MMA:18A | MIG:45A/TIG:36A MMA:64A | MIG:30A/TIG:23A MMA:32A | MIG:19A/TIG:15A MMA:16A | MIG:18A/TIG:13A MMA:15A |
| 输出电流范围 Output Range | MIG:50-350A LITTIG:10-350A | MIG:50-250A UITIG:10-250A | MIG:50-350A LITIG:10-350A | MIG:50-350A LIFTTIG:10-350A | MIG:50-350A LIFTTIG:10-350A |
| 占载率 DutyCycle | MIG/TIG:60%350A/ 100% 271AMA:60% | 2%194AMA:100% | 3%271AMA:100% | MIG/TIG:60%250A/10 MIG/TIG:60%350A/10|MIG/TIG:60%350A/10 30271AMM3260% | MIG/TIG:60% 350A/10 30271AMMA260% |
| 空载电压 OCV | 78V | MIG/MMA:70V LIFTTIG:1-25V | MIG/MMA:67V LIFTTIG:1-25V | MIG/MMA:76V LIFT TIG:1-25V | MIG/MMA:88V LIFTTIG:1-25V |
| 焊条直径 Electrode@ | M0.8-150-12-.6m 05.0mm | M0.8-15-1.2.04. 05.0mm | MIG:0.8-1.0-1.2-1.6mmMMA:02.5，03.2，04.0,05.0mm | ||
| 包装尺寸/产品净重 | 455X275X340mm | 455X275X340mm/47KG | |||
MIG INVERTER WELDER
GEOSTAR
本产品是一款支持单/双脉冲MIG、直流MIG、MMA及LIFTTIG四种工艺的多功能逆变焊机，配备7英寸彩色大屏、协同/手动双控模式及四辊送丝系统，适用于钢/sipreeppri
单/双脉冲Pulse Double Pulse
热起弧可调 Adjustable Hot-Start
四辊送丝4-Roller Feeder
多电压输入Multi-Voltage
三工艺合一3-in-1Processes
2T/4T模式
2T/4TMode&Adjustable
Post-Gas
VRD防触电 Voltage Reduction Device
可选配件OptionalAccessories
TIG焊枪 MIG焊枪 电焊钳 TIGWelding MIG Welding Electrode Torch Torch Holder 9 家 焊接电缆 焊接焊帽 焊接手套 Welding Welding Welding Cable Helmet Gloves 焊接围裙 X 电焊敲渣锤 welding Welding Wire Welding Chipping Apron Brush Hammer
配备7寸TFT彩色显示屏 Equipped witha7"TFTcolor display
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG-350WPN LCD | MIG-350WPNLCDBV | |||
| 输入电压/频率 InputVoltage/Freq. | 3×380V50/60Hz | 1×220V50/60Hz | 3×220V50/60Hz | 3×380V50/60Hz | 3X440V50/60Hz |
| 功能 Function | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA | MIG/TIG/MMA |
| 最大输入电流 I1 max | MIG:27A/TIG:20A MMA:23A | MIG:58A/TIG:46A MMA:64A | MIG:39A/TIG:30A MMA:32A | MIG:25A/TIG:19A MMA:21A | MIG:23A/TIG:17A MMA:20A |
| 有效输入电流 Ileff | MIG:21A/TIG:15A MMA:18A | MIG:45A/TIG:36A MMA:64A | MIG:30A/TIG:23A MMA:32A | MIG:19A/TIG:15A MMA:16A | MIG:18A/TIG:13A MMA:15A |
| 输出电流范围 Output Range | MIG:50-350A LITTIG:10-350A | MIG:50-250A LFTIG:10-250A | MIG:50-350A LFTTIG:10-350A | MIG:50-350A LITIG:10-350A | MIG:50-350A LITIG:10-350A |
| 占载率 DutyCycle | MIG/TIG:60%350A/ 100%/271A MMA:60% | MIG/TIG:60%250A/10MIG/TIG:60%350A/10MIG/TIG:60%350A/10 2%194AMA:100%0%271AMA:100% | 30271AMA:60% | MIG/TIG:60%350A/10 30271AMMA20% | |
| 空载电压 OCV | 78V | MIG/MMA:70V LIFTTIG:1-25V | MIG/MMA:67V LIFTTIG:1-25V | MIG/MMA:76V LIFT TIG:1-25V | MIG/MMA:88V LIFTTIG:1-25V |
| 焊条直径 Electrode@ | M0.82.50-1.1.4.m 05.0mm | M:0.82.51.2, 05.0mm | MIG:0.8-1.0-1.2-1.6mmMMA:02.5,03.2，04.0,05.0mm | ||
| 包装尺寸/产品净重 | 455X275X340mm | 455X275X340mm/47KG | |||
MIG/MAG INVERTER WELDER GEOSTAR
本产品是一款自动自适应送丝速度的MIG/MAG焊机，采用协同式简易操作设计，适用于钢、不锈钢、铝等多种材料焊接。
isi nd more.
茶 四辊送丝 4-RollerFeeder 双控模式 Synergic/ManualMode 热起弧可调 Adjustable Hot-Start 多电压输入 Multi-Voltage
X 三工艺合一 3-in-1Processes
2T/4T模式
2T/4TMode&Adjustable
Post-Gas
VRD防触电 Voltage Reduction Device 配备7寸LCD彩色显示屏 Equipped with a 7" LCD color display
GEOSTARN HIC MANALA 8.8 8.8 r+ 8 LS MAVJU (CAs DELATT17 ne CW F4 MDOMAL 0e FVCN /M
可选配件OptionalAccessories
众 新 MIG/MAG焊枪 导电嘴 接地夹 MIG/MAG welding Contact Earth torch Tip Clamp 家 焊接电缆 送丝轮 焊接手套 Welding WireFeeder Welding Cable Roller Gloves 焊接围裙 气体调节器/流量计 焊接焊帽 Welding Gas Regulator Welding Apron Flowmeter Helmet
PRODUCTPARAMETERS产品参数
| 型号 Model | MIG/MAG-300TYN-T3LCD |
| 输入电压/频率 InputVoltage/Freq. | 1×220V50/60Hz |
| Function | MIG/MAG |
| 输utCcurrent | 16A |
| 输出电流范围 Output Range | 15-160A |
| 占载率 Duty Cycle | 25%150A |
| 焊丝直径范围 WireDiameter | 0.6-1.0mm |
| 钢用焊丝 SteelWire | 0.6/0.8mm |
| 铝用焊丝 Alu Wire | 0.8mm |
| 包装尺寸/产品净重 | 455X275X340mm/30KG |
MIG/MAG INVERTER WELDER
GEOSTAR
本产品是一款直流MIG/MAG逆变焊机，专为0.5mm薄板焊接设计，支持CO2气保焊，配备一元化调节功能，可自动匹配焊接参数，操作简单。
Tisprductisls
unifiedadjustmentforautomatic parametermatching.
0.5mm焊接
0.5mmSheetWelding
圆
一元化调节Unified Adjustment
自动匹参数Auto Parameter Matching
焊丝回烧 Wire Burn Back
88.88 >>
大屏显示Large LED Display
VRD防触电 Voltage Reduction Device
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号del | MIGMAG-200-T1 |
| 输入电压/频率 Input Voltage/Freq. | 3X380V50/60Hz |
| 输入容量 InputCapacity | 5.1kW |
| 输入u电Current | 10A |
| 最大电流 Max Current | MAG:15-200A |
| MIG电流 MIG Current | MIG:15-200A |
| 适用焊丝直径 UsableFluxCord | 0.6-1.0mm |
| 最大爆ir载ng | 15kg |
| 却ingMethod | Fan |
| 包装e尺寸/产品净重 | 455X275X340mm/40KG |
冷轧钢板推车，固承重，动方便通用焊机/瓶。oldrolledsteeltroeyurdybilevesaloreders/rs
| 型号 Model | TROLLEYST-100 | T-200 |
| Mtrial | Cold-RolledSteelPlate | Cold-Rolled Steel Plate |
| 尺寸 size | 90x70x30CM | 98.5x79x35.5CM 48x35CM(Platform Size) |
PRODUCTPARAMETERS产品参数
| 型号 model | T-400 | T-500 |
| Material | Cold-Rolled Steel Plate | Cold-RolledSteel Plate |
| 尺寸 size | 125×105×56CM 95x40x65CM(Bottom Welder Slot) | 103.7x98.5x40CM 45.5x98.5x40CM(Bottom WelderSlot) |
焊接材料系列，含美式/欧式接地夹、实芯焊丝及碱性焊条，满足不同焊接需求。
weldingonsbioptsditrti
PRODUCTPARAMETERS 产品参数
| 型号 Model | American Clamp | European Clamp | Welding wire | Wlectrode basic |
| speifiation | 300A/500A | 300A/500A | Sizes: 0.6/0:8/10/12mm | Sizes:2.5/3.2/4.0mm |
焊接手套，外层耐热耐磨牛二层皮，棉纱衬里吸汗舒适，CE认证，焊接作业安全防护。
tua
| 型号del | GWG-3101/GWG-3102/GWG-3103 |
| 外层材质 Outer Material | Heat&Abrasion ResistantA-GradeSplitCowhide |
| Lining | CottonTwillLining,Sweat-Absorbing |
| Cetifiaionn | CE01401/06/2024 |
lectrode holderseries,multiple standards,3ooA/5ooA,brass/ABs,fitsall welders
| 型号 Model | AmericanType Clamp | American TypeClamp |
| speifieation | 300A/500A | 300A/500A |
| Mterial | Brass/ABS | Brass/ABs |
| 型号 Model | AmericanType Clamp | European TypeClamp |
| speifieation | 300A/500A | 300A/500A |
| 材质 Material | Brass/ABs | brass/Abs |
| 型号del | Netherlands Type Clamp | Japan TypeClamp |
| speifieation | 300A/500A | 300A/500A |
| Material | Brass/Abs | Brass/ABS |
| 型号 Model | GermanyTypeClamp | GermanyTypeClamp |
| specifiation | 300A/500A | 300A/500A |
| Material | brass/Abs | brass/Abs |
| model 型号 | ItalyType Clamp | ItalyType Clamp |
| 规格 Specification | 300A/500A | 300A/500A |
| 材质 Material | Brass/Abs | Brass/Abs |
WELDING ACCESSORIES
GEOSTAR
焊枪系列，涵盖MMA、MIG/MAG、TIG、等离子切割及螺柱焊等多种工艺，适配各品牌焊机接口，满足不同焊接作业需求。
welig diverse welding applications.
v0 0
| 型号 model | MMA-1 | MIG-1 |
| 工艺sType | MMA Arc Welding | MIG/MAG Gas Shielded Welding |
| 适用场景 App.Scen. | Electrodewelding,on-sitemaintenance | Sheet metal,heavy plate,aluminum welding |
| 型号 Model | MIG-2 | HQ-200 |
| 工艺类型 ProcessType | MIG/MAG Gas Shielded Welding | Stud Welding |
| 适用场景 App.Scen. | Sheetmetal,heavyplate,aluminumwelding | Stud fastening welding (forRS-2500) |
9 19
| 型号 Model | cuT-1 | TIG-1 |
| 工艺类SType | Plasma Cutting | TIG Welding |
| 适用场景 App.Scen. | Metal plate cutting | Stainlesssteel,auminumalloyprecisionwelding |
焊接配件系列，涵盖送丝焊枪、钨针、CO2加热器、导电嘴及C型夹钳等，满足焊接作业中送丝、气体加热、夹持紧固等多种需求。
velding needs in wire feeding,gas heating, and clamping during welding operations.
PRODUCTPARAMETERS产品参数
| 型号 Model | PA-1(Pneumatic/AirlessWire Drawing WeldingGun) | HT-1(CO2Gas Heater) |
| 工艺类型 ProcessType | MIG/MAG | MIG/MAG |
| 适用场景 App.Scen. | Electrode welding,on-sitemaintenance | CO2welding,preventsgascylinder freezing |
| 型号 Model | TN-1(Welding Tungsten Needle) | NW-1(Conductive Nozzle& Wrench) |
| 工艺Type | TIG | MIG/MAG |
| 适用场景 App.Scen. | TIGwelding | MIG/MAG torch contact tip replacement |
| 型号 Model | CP-1(C-Type Clamp) | CP-2(C-Type Clamp) |
| 工艺类型 ProcessType | Universal | Universal |
| 适用场景 App.Scen. | Workpiececlampingand fixing | Workpiececlampingandfixing |
WELDING ACCESSORIES
角度磁铁用于焊接工件多角度固定与定位，带开关设计，适用于钢板拼接、管材定位及钣金夹持作业。
Anglemagi alignment, and sheet metal clamping.
| 型号 Model | JT-1000(Angle Magnet with Switch) | JT-2000(Angle Magnet) | JT-3000(Angle Magnet) |
| 规格 Specifications | 44×74mm | 64×95mm | 85×120mm |
| 角度 Angles | 45°/90° | 30°/45°/60°/75°/90° | 45°/80° |
| HoldingForce | 22kg | 22kg | 22kg |
焊接防护屏与防护毯用于阻隔焊接弧光、高温熔渣及火花飞溅，分别提供刚性隔离与柔性覆盖防护，适用于焊接区域人员与设备的安全保护。
linsei rpersonnel and equipmentsafety inwelding areas.
| 型号del | WS-1000 | WS-2000 |
| Material | 0.4mm thick special vinyl | Toughened fiberglass |
| 颜色r | Darkgreen/Red/Goldenyellow (varying transparency) | 1 |
| Temp Rsistance | 1 | 126°C (continuous use) |
| Melting point | 一 | 1649℃ |
| 表u面处ceTreatment | 1 | Enhancedwear,chemical,oil&moistureresistance |
| 尺 | 174×174cm/174×234cm | Customizable upon request |
WELDING ACCESSORIES
且燃棉围裙、牛皮围裙与焊接工具背包，分别提供轻便防护、重型防护与装备收纳携带，满足焊接作业中从身体防护到工具管理的完整需求。
Flaetad carryingrespectivelyoveringtheompleteeedsfrompersonalsafetytotoolmanagementinweldingorations.
| 名称 Name | Welding Apron | Leather Welding Apron |
| Material | Flame retardantcotton | Splitcowhide leather |
| 防护性能 Protection | Sparks&spatter | Heat&flameresistant |
| 缝线 Thread | Standard stitching | Heat-resistantUSKevlarthread |
| 防护范围 Coverage | Standard length | Extra-long toknee |
| 适用场景 App.Scen. | Lightwelding,maintenance,dailytasks | Heavy-duty welding,metalworking,forging |
| 名称 Name | Welding Tool Backpack |
| Material | 600DPolyester,weatherrsistant |
| 功能 Features | Business card slot,sidezipped pocket,velcro loop fortall tools,insidezipped pocketforiPad |
| 背负 Carrying | Comfortableshoulderfit,easytocarry |
| Caacity | Holdsweldinghelmet,tools,andwork gear |
| 尺 Size | 18.9×15.8X12.5 inches (with helmetcatch) |
皮革混纺焊接夹克用于通用焊接防护， 9 0 % 皮革耐磨耐热，按扣与魔术贴设计穿脱便捷，适用于车间日常焊接与维修作业。
Leather blend welding jacket provides general welding protection, 90 % leather for durability and heat resistance,snap closures and velcro for easy on/off,suitable for daily workshopwelding and maintenance.
M心
| 名称 Name | GRAINLEATHERSLEEVEDWELDING JACKET | LEATHER WELDING JACKET | LEATHER WELDING JACKET |
| 材质 Material | Graincowhide sleeves+FRcotton body | Graincowhide sleeves+FRcotton body | 90%Cowsplitleather/10%Cotton |
| 防护性能 Protection | Sparks,spatter,heat | Spatter,sparks,highheat | Thermal&burnresistant |
| deetesin | Standard grain leather | Two-partarmpitformobility | Standard leather |
| 前襟闭合 FrontClosure | 3-layer fabric + velcro | 3-layerleather+fabric+velcro | Snap closures + nylon tape |
| 适用场tons | Lightwelding,maintenance | Highamperage,out-of-position | Workshop,dailywelding,fabrication |
HIGH FREQUENCY
兴
□
快速加热 Rapid Heating
TFT彩色屏幕 TFT Display
四
感应加热技术 Induction Heating Technology
数字温控 Digital Temp Control
A
高效节能 High Efficiency Energy Saving
多重保护功能ComprehensiveProtection
HIGHFREQUENCYCARBODYDENTREPAIRMACHINE
GEOSTAR
本产品是一款钢车身免漆凹陷修复仪，通过快速加热板金进行小面积精细修复，配备液晶屏显示与一键式操作，适用于汽车免漆凹陷修复作业。
Tisproutitst LCDdisplayand one-buttonoperation,suitableforautomotivepaint-lessdentrepair.
快速加热修复 Rapid Heating Repair
TFT彩色屏幕 TFT Display
B
一键操作One-ButtonOperation
记忆功能 MemoryFunction
时间/功率可调AdjustableTimePower
多重保护功能ComprehensiveProtection
功能特点FunctionIntroduction
1.采用TFT屏直观方便显示工作时间及功率。机器无保护情况下按下工作键，动态显示加热状态画面。
2.时间+、-用于单次按工作开关后调整工作时间。机器内置记忆功能，即每次调整后，按一下工作开关，时间会被记录下来。
每次开机都会按上次关机时调整工作时间，无需每次都重新调整。
3.功率“+”和“-”用于调整单次按动开关后的工作功率，具有内置记忆功能且可同时调整。
1.TFT Display: Equipped withaTFTscreenclearlyshowing working time&power.A dynamic heatingstatus isdisplayed when the trigger is pressed without protection engaged. 2. Time + 1 = adjustsworking timepertrigger press.Built-inmemorysavessetings - the last time value loadsautomaticallyonstartup. 3.Power + 1 - : adjustsworkingpowerper trigger pressFeaturesbuilt-inmemory canbeadjusted simultaneously with the timesetting.poweradjustments.
包装配件AccessoriesIncluded
4 电源线 A 连接线 高频加热头 4 Powercable Connecting cable High-frequency eating head
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 InputVoltage/Freq. | 额定输入功率 Rated InputPower | 最大额定电流 Maximum Rated Current | 能效 Efficiency | 功率因数 PowerFactor | 绝缘等级 Insulation Level | 包装尺寸/净重 Size/Weight |
| PDR-1000S | 230V/50Hz | 1000w | 40A | ≥90% | ≥0.95 | f | 510X200X415mm |
本产品是一款无明火感应加热器，用于快速加热螺栓、螺母及金属部件，便于拆卸，环保安全，适用于汽车维修及工业维护场景。
Tisprdti safe,suitableforautomotiverepairand industrialmaintenance.
快速加热 Rapid Heating
TFT彩色屏幕 TFT Display
便携设计
ortableDesignMultipleCoil Sizes
高效节能 High Efficiency EnergySaving
多重保护功能ComprehensiveProtection
功能特点FunctionIntroduction
1.采用TFT屏直观方便显示工作时间及功率。机器无保护情况下按下工作键，动态显示加热状态画面。
2.时间+、-用于单次按工作开关后调整工作时间。机器内置记忆功能，即每次调整后，按一下工作开关，时间会被记录下来。
每次开机都会按上次关机时调整工作时间，无需每次都重新调整。
3.功率“+”和“-”用于调整单次按动开关后的工作功率，具有内置记忆功能且可同时调整。
1.TFT Display Equipped withaTFTscreenclearlyshowing working time&power.A dynamic heatingstatusisdisplayed whenthe trigger is pressed without protection engaged. 2. Time + 1 = : adjustsworking time pertrigger press.Built-inmemorysaves setings - the last time value loadsautomaticallyonstartup. 3.Power + 1 - : adjustsworking power per trigger pressFeaturesbuilt-inmemory canbeadjusted simultaneously withthe timesetting.poweradjustments.
包装配件AccessoriesIncluded
可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 Input Voltage/Freq. | 额定输入功率 Rated Input Power | 输出电压 OutputVoltage | 能效 Efficiency | 功率因数 PowerFactor | 绝缘等级 Insulation Level | 包装尺寸/净重 Size/Weight |
| MHR-2500S | 230V50Hz | 2500W | 90V | ≥90% | ≥0.95 | f | 510X200X415mm |
INTELLIGENT CAR BUMPERREPAIR MACHINE
GEOSTAR
本产品是工业级塑料焊接修复机，搭载数字温控模块与防短路电阻电路，双面修补焊头延长使用寿命；支持功率无级调节，适配多种焊钉及波纹线，广泛应用于汽车保险杠、程塑料及板材修作业。ndustrialPlasticWeldingMachineithdigialtemperaturecontroandshort-icuitprotectionedoublesidedinsugfepsotmptibisidideafstpartsand panel repairs.
快速加热 Rapid Heating
TFT彩色屏幕 TFT Display 数字温控 Digital Temp Control
感应加热技术 Induction Heating Technology
高效节能 High Efficiency EnergySaving 多重保护功能 Comprehensive Protection
功能特点FunctionIntroduction
1.采用TFT屏直观方便显示工作时间及功率。机器无保护情况下按下工作键，动态显示加热状态画面。
2.时间+、-用于单次按工作开关后调整工作时间。机器内置记忆功能，即每次调整后，按一下工作开关，时间会被记录下来。
每次开机都会按上次关机时调整工作时间，无需每次都重新调整。
3.功率“+”和“-”用于调整单次按动开关后的工作功率，具有内置记忆功能且可同时调整。
1.TFT Display: Equipped withaTFTscreenclearlyshowing working time&power.A dynamic heatingstatus isdisplayed when the trigger ispressed without protection engaged. 2.Time+/-:adjustsworking time per trigger press.Built-inmemorysavessettings - the lasttime value loadsautomaticallyonstartup. 3.Power+/-:adjusts working power per trigger pressFeaturesbuilt-inmemory canbeadjusted simultaneously with the time setting.poweradjustments.
包装配件IncludedAccessories
2 大波浪焊接钉 小波浪焊接钉 V形焊接钉 M形钉 Large wave welding nail Small wave welding nailV-shaped welding nail M-shaped nail VWWVS 可选配件OptionalAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 Input Voltage/Freq. | 输入电流 Input current | 输出电压 Output Voltage | 输出电流 Outputcurrent | 功率因数 PowerFactor | 绝缘等级 Insulation Level | 包装尺寸/净重 Size/Weight |
| PRS-100 | AC230V50/60Hz | 1.5A | 2.6V | 5-30A | ≥0.95 | f | 510X200X415mm |
INTELLIGENTCARBUMPERREPAIRMACHINE
GEOSTAR
本产品是一款高频焊接机广泛应用于汽车领域、ABS、PP、PVC、PE等热熔性塑料的焊接。如车身塑料件，汽车仪表盘、车灯车镜、内饰、保险杠、油箱、风管等焊接soctelytiustrosPVCndother components.
高频快速焊接 High-Frequency Rapid Welding 高强度融合 High-Strength Fusion
三位一体驱动3-in-1Direct Drive液晶显示LCD Display
O
高效节能 HighEfficiency EnergySaving 轻便灵活 Lightweight Flexible
功能特点FunctionIntroduction
包装配件AccessoriesIncluded
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 Input Voltage/Freq. | 输出功率 Output Power | 频率 Frequency | 焊接面积 Welding Area | PP料厚度测试 Testof PPMaterial | 焊头行程 Welding Horn | 包装尺寸/净重 Size/Weight |
| PRH-3500 | 220V50Hz | 3200W | 35KHz | Φ160mm | ≤3.5mm | 75mm | 468X428X245mm |
HIGHFREQUENCYHEATER
GEOSTAR
本产品是一款便携式无明火感应加热器，用于快速加热螺栓、螺母及金属部件，功率可调，便于拆卸，环保安全，适用于汽车维修及工业维护场景。
Tispdtii tallyfriendlyandsafe,suitableforautomotiverepairand industrialmaintenance.
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 Input Voltage/Freq. | 额定输入功率 Rated InputPower | 输出电压 Output Voltage | 能效 Efficiency | 功率因数 PowerFactor | 绝缘等级 Insulation Level | 包装尺寸/净重 Size/Weight |
| MHR-1200S | 230V50Hz | 1200W | 90V | ≥90% | ≥0.95 | f | 510X20X415mm |
HIGHFREQUENCYHEATER
本产品是一款便携式无明火感应加热器，用于快速加热螺栓、螺母及金属部件，功率可调，便于拆卸，环保安全，适用于汽车维修及工业维护场景。
Tisprductiiti andsafe,suitable forautomotiverepairandindustrialmaintenance.
快速加热 Rapid Heating
模块化设计 Modular Design
便携设计
PortableDesignMultipleCoil Sizes
高效节能 High Efficiency EnergySaving
多重保护功能ComprehensiveProtection
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 InputVoltage/Freq. | 额定输入功率 Rated InputPower | 输出电压 OutputVoltage | 能效 Efficiency | 功率因数 Power Factor | 绝缘等级 Insulation Level | 包装尺寸/净重 Size/Weight |
| MHR-2000S | 230V50Hz | 2000W | 70V | ≥90% | ≥0.95 | F | 510X200X415mm |
PORTABLESHEET METAL REPAIR MACHINE
GEOSTAR
本产品是一款便携式钣金修复机，体积小、重量轻、功率高、操作简单，适用于小型钣金修复及日常维修作业。
hisoducti netal repair and daily maintenance work.
| 型号 Model | 输入电压/频率 Input Voltage/Freq. | 输入电流 Input Current | 输出电压 Output Voltage | 输出功率 Output Power | 焊接时间 WeldingTime | 包装尺寸/净重 Size/Weight |
| DN-100X | 230V50/60Hz | 3.6A | 1-6V | 1600W | 550X195X435mm |
SPOT WELDING
本产品是一款手动控制点焊时间的点焊机，采用线圈抽头式电流控制，电极压力可调，适用于高屈服点、高应力板材的焊接作业。
Tisoductib high-yield-point and high-stresssheet welding.
手动控时
Manual Timing AdjustableCurrent
压力可调
强力焊接
Pressure Adjustable Strong Welding
O
轻便便携
电极压力可调
Adjustable Electrode Pressure
Lightweight Portable
)
彩
高功率焊接输出HighPowerWelding Output
自由操作FlexibleOperation
包装配件 IncludedAccessories
PRODUCTPARAMETERS产品参数
| 型号 Model | 输入电压/频率 InputVoltage/Freq. | 输入电流 Input Current | 峰值电流 PeakCurrent | 空载电压 ocv | 有效电流 RMSCurrent | 最大焊接厚度 Max.WeldingThicknessCable Specification 100%Cu | 电缆规格 | 是否纯铜 | 包装尺寸/净重 Size/Weight |
| DN-100E | 1×230V，50/60Hz | 16A | 2300A | 2.0v | 1540A | 2+2mm | HO5WF3×2.5mm² | √ | 550X195X435mm |
SPOT WELDING
本产品是一款手动控制点焊时间的点焊机，采用线圈抽头式电流控制，电极压力可调，适用于高屈服点、高应力板材的焊接作业。
Tisoductiotdiurltbdse high-yield-point and high-stress sheet welding.
微电脑控制MicroprocessorControlled
同步电子计时器SynchronizedElectronic Timer
翔
同步电子计时器SynchronizedElectronicTimer
连续/脉冲双模式
Continuous PulsedModes
电极压力可调
Adjustable Electrode
Pressure
点焊时间可调
Adjustable Welding Time
)
高功率焊接输出High PowerWelding Output
自由操作FlexibleOperation
包装配件IncludedAccessories
PRODUCTPARAMETERS 产品参数
| 型号 Model | 输入电压/频率 InputVoltage/Freq. | 输入电流 Input Current | 峰值电流 PeakCurrent | 空载电压 oCv | 有效电流 RMSCurrent | 最大焊接厚度 Max.WeldingThicknessCableSpecification 100%Cu | 电缆规格 | 是否纯铜 | 包装尺寸/净重 Size/Weight |
| DN-100S | 1×230V,50/60Hz | 16A | 8900A | 2.5V | 6300A | 2+2mm | HO5WF3×2.5mm2 | √ | 550X195X435mm 10KG |
BODYSHEET METAL REPAIRMACHINE
GEOSTAR
本产品是一款采用数字控制、带记忆功能的钣金修复机，支持三角拉片、圆形垫片、OT介子、螺柱、铆钉、波形线、高点压平、单面点焊、碳棒收缩及精修拉拔等多种修模能sodctiigiatrolichictioptiidsiciandfine dent puling,with manual welding capability
田
10合1修复功能 10-in-1Repair Functions
数字控制系统Digital ControlSystem
之
记忆功能Memory Function手动/自动双模式Manual&AutoModes
T （)
快速焊枪
QuickGun
High Power Output
钢车身适用 Steel Body Compatible
多种修复工艺 MultipleRepair Processes
可选配件OptionalAccessories
PRODUCTPARAMETERS 产品参数
| 型号 Model | 输入电压/频率 InputVoltage/Freq. | 峰值电流 PeakCurrent | 空载电压 oCV | 有效电流 RMSCurrent | 车身适用 Chassiscompatible | 底盘适用 Bodycompatible | 手动枪 Manual Gun | 包装尺寸/净重 Size/Weight |
| TX-2300 | 230V50Hz | 2300A | 7.2V | 1840A | √ | √ | √ | 565x435x345mm 13.7KG |
