KINLONG U槽门窗五金目录 - 电子画册在线预览、各类电子画册在线制作-云展网平台

148 / 149

★★ PSX4242/T ★★ PSX4242

★ PSX4247/T ★ PSX4247

Cylinder Series

Cylinder Specification

Instructions

A is for the space from the key to cylinder center .

B is for the space from the knob to cylinder center .

Install instruction

Cylinder code: PSX 4242/T

In door

PSX A B/T cylinder for \"T\"knob PSX A B PSX A B / H cylinder for \"H\"knob

length of B

length of A

length of B

length of A

length of B

length of A

PFC0700CK18

◆ Suitable for open-in

windows

Assembly Dimension Unit(mm)

Type A B C D E

PFC00108 203 183 163 116 50

PFC00110 254 234 214 165 50

PFC00112 305 285 265 210 50

PFC00114 356 336 316 255 50

PFC00116 356 336 316 290 50

★★

◆ Suitable for open-in

windows

Assembly Dimension Unit(mm)

Type A B C D E

PFC050008 208 202 185 107 45

PFC050010 261.5 254.5 238 190 45

PFC050012 365 358 341.5 210 45

PFC050014 361 355 338 254 45

★★

★

PFC0900

PAQK001 23.6

160

162

428

Limiter & Safety hock Series ◆ Temperature -

controlled

limiting stopper

◆ Suitable for

fire-resistant

open-in windows

◆ Use with corner hinges PHYSR00609/13

◆ Minimum applicable width 500mm

◆ Suitable for concealed pivot hinge

Meet the minimum window width 350mm

◆ Safety buckle

◆ It is used for open-out side hung window

to realize small angle opening of window

◆ The window can be opened at a small angle or a large Angle

150 / 151

Assembly Dimension Unit(mm) Technical Parameter

Type A B C D E F G H Max. Window

Height (mm)

Max. Window

Width (mm)

Max. Window

Weight (Kg) Opening Angle

PHCP020010K18G13.5 264 181 93.5 59 40 255 217 34 750 450 10 87°

PHCP020012K18G13.5 302 197 101 59 40 292 245 29 800 550 12 87°

PHCP020014K18G13.5 353 232 118 59 40 345 290 31 900 650 15 87°

PHCP020016K18G13.5 402 253 103 59 40 392 321 30 1000 700 17 87°

PHCP020018K18G13.5 463 262 134 58 40 463 309 30 1100 750 20 87°

18+0.5

4.5

13.5+0.5 0

15.8

PHCP0200 Series (K18G13.5)

◆ Suitable for side-hung wndow, Stack height of 13.5mm

◆ Main material is high quality stainless steel 304.

◆ Different product specifications will cause slightly difference on the

structure, the picture is PHCP020014K18G13.5.

◆ Meet the standard of china\"Construction door&window

hardware friction stay\"JG/T127-2007.

◆ Along with the technique improvement, some data will be changed accordingly.

◆ Suitable for side-hung window.

◆ Main material is high quality stainless steel 304.

◆ Different product specifications will cause slightly difference

on the structure, the picture is PHCP010014K18.

◆ Meet the standard of china\"Construction door&window

hardware friction stay\"JG/T127-2007.

◆ Along with the technique improvement, some data will be changed accordingly.

◆ There are other products with a stack height of 15.5mm, please consult the

technical department of the company for details.

Assembly Dimension Unit(mm) Technical Parameter

Type A B C D E F G H I J Max. Window

Height (mm)

Max. Window

Width (mm)

Max. Window

Weight (Kg)

Opening

Angle

PHCP010010K18 261 183 105 61 42 255 215 190 145 32 1300 400 18 45°/85°

PHCP010012K18 308 211 118 73 39 300 239 211 143 32 1300 500 22 45°/88°

PHCP010014K18 360 228 133 88 39 349 302 227 153 32 1400 600 25 45°/88°

PHCP010016K18 409 246 151 106 39 397 346 250 160 32 1500 650 27 45°/88°

PHCP010018K18 457 267 144 103 39 446 392.5 262.5 238 32 1700 700 30 45°/88°

★

PHCP0100 Series (K18) Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

152 / 153

◆ Suitable for side-hung wndow.

◆ Main material is high quality stainless steel 304.

◆ Different product specifications will cause slightly difference on the

structure, the picture is PHCP010014K22.

◆ Meet the standard of china\"Construction door&window

hardware friction stay\"JG/T127-2007.

◆ Along with the technique improvement, some data will be changed accordingly.

◆ There are other products with a stack height of 15.5mm, please consult the

technical department of the company for details.

Assembly Dimension Unit(mm) Technical Parameter

Type A B C D E F G H I J Max. Window

Height (mm)

Max. Window

Width (mm)

Max. Window

Weight (Kg) Opening Angle

PHCP010010K22 265 157 / / 40 251 211 186 142 30 1400 400 25 45°/85°

PHCP010012K22 313 216 116 65 39 300 246 220 156 32 1400 500 30 45°/88°

PHCP010014K22 361 232 130 90 64 350 304 238 162 32 1500 600 33 45°/88°

PHCP010016K22 412 252 149 109 64 400 354 263 171 32 1600 700 38 45°/88°

PHCP010018K22 459 268 145 105 40 449 274 247 162 34 1800 800 41 45°/88°

★★

★

PHCP0100 Series (K22)

Assembly Dimension Unit(mm) Technical Parameter

Type A B C D E F G H I J K Max. Window

Height (mm)

Max. Window

Width (mm)

Max. Window

Weight (Kg)

Opening

Angle

PHCS010010K18 269 139 96 62 36 257 / 192 159 135 30 650 1050 23 30°

PHCS010012K18 317 163 121 62 36 307 224 196 163 138 30 750 1100 29 25°/30°

PHCS010014K18 359 199 157 62 36 347 259 216 183 158 30 850 1150 34 25°/30°

PHCS010016K18 416 239 198 62 36 406 285 225 192 167 30 950 1200 39 25°/30°

PHCS010018K18 468 272 230 62 36 457 305 249 216 191 30 1050 1250 43 25°/30°

◆ Suitable for top-hung window.

◆ Main material is high quality stainless steel 304.

◆ Different product specifications will cause slightly difference

on the structure, the picture is for the product PHCS010014K18.

◆ Meet the standard of china\"Construction door&window

hardware friction stay\"JG/T127-2007.

◆ Along with the technique improvement, some data will be changed accordingly.

◆ There are other products with a stack height of 15.5mm, please consult the

technical department of the company for details.

PHCS0100 Series (K18) Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

154 / 155

Assembly Dimension Unit(mm) Technical Parameter

Type A B C D E F G H I J K Max. Window

Height (mm)

Max. Window

Width (mm)

Max. Window

Weight (Kg)

Opening

Angle

PHCS010010K22 269 141.5 100 62 36 257.5 210.5 183.5 150 124 29 700 1000 45 30°

PHCS010012K22 318 163 121 62 36 307 230 203 169 144 30 800 1100 55 25°/30°

PHCS010014K22 359 199 157 62 36 348 300 212 178 153 30 1000 1200 65 25°/30°

PHCS010016K22 415 239 198 62 36 403 355 229 195 170 30 1200 1300 80 25°/30°

PHCS010018K22 467 272 230 62 36 455 287 229 196 170 32 1300 1400 100 25°/30°

◆ Suitable for top-hung window.

◆ Main material is high quality stainless steel 304.

◆ Different product specifications will cause slightly difference

on the structure, the picture is for the product PHCS010014K22.

◆ Meet the standard of china\"Construction door&window

hardware friction stay\"JG/T127-2007.

◆ Along with the technique improvement, some data will be changed accordingly.

◆ There are other products with a stack height of 15.5mm, please consult the

technical department of the company for details.

PHCS0100 Series (K22)

Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

Interpretation of locking plate code: PSKFD00309

Locking plate

FD 003

Anti-Theft Type Serial number 9 Series

Frame Accessory Series

U groove

door and

window

156 / 157

PSK20109

PSK20113

PSK104

PSK10609

PSK10613

6.3

13.5

46 4

16.5

2.6

6.3

13.5

★★

Frame Accessory Series

◆ Locking plate

◆ Match with the u-groove fake mullion profile

◆ Locking plate

◆ Match with the c-groove profile

◆ Locking plate

◆ Match with the c-groove profile

PSK00709

5.5

PSKFD00309

4.2

PSK00713

PSKFD00313

7.7

3.5

PSK00813

3.9

46 5.5

11.5

Frame Accessory Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Locking plate

◆ Anti-thief locking plate

158 / 159

16.5

30.5

PSK01713A

PSK01709A

PSK01909

PSK01913

7 3

5.5

4 4

★

47 16.5

PSK02209

PSK02213

44.5 7.5

7.5

44.5

25.5

4 4

Frame Accessory Series

◆ Locking plate

◆ Anti-thief locking plate

PSKZBR00109P3A

PSKZBR00109P4A

PSKZBR00109P6.5A

PSKZBR00113P3A

PSKZBR00113P4A

PSKZBR00113P6.5A

PQZSKL00209

PQZSKR00209

PSK025

110 13

PSK02313P3

PSK02313P4.5

PSK02313P6

PSKZBR00109P3A PSKZBR00109P4A PSKZBR00109P6.5A

PSKZBR00113P3A PSKZBR00113P4A PSKZBR00113P6.5A

◆ Locking plate

◆ Suitable for fire resistant

open-in windows

◆ Locking plate

◆ Used for fan shaped U groove composite profile

PSK02313P3 PSK02313P4.5 PSK02313P6

53.6

25.5

2 2

8.2

4.5

8.2 8.2 28

4.2

11.8 12.8 15.3

3 4 6.5 4.2

4.2

27.8

11.8 12.8 15.3

3 4 6.5

4.2

Frame Accessory Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Tilt lock plate

◆ Left & Right (The picture is the right type)

◆ Self-locking piece

◆ Left & Right

◆ Suitable for fire-resistant open-in side-hung windows

◆ Self-locking piece

◆ Left & Right

◆ Suitable for fire-resistant open-in side-hung windows

160 / 161

PXK00109

PQZSKL00213

PQZSKR00213

110 13

8 4

76 13.5

PSK101

13.5

28.5

36.4 12

PXK00113

PXK00209

20.7

4 4

14.5

Frame Accessory Series

◆ Locking plate

◆ Suitable for the serie 20 profile

◆ Locking plate

◆ Tilt lock plate

◆ Left & Right (The picture is the right type)

25.5 21.5

PZCG00109

PZCG00113

PZCGR00109

PZCGL00109

PZCZ00113

★ PZCG00109

PSK002

PZCZ00109

PZCZ00209

PZCZ00309

★ PZCZ00109

114

Frame Accessory Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Supporting block

◆ Locking plate

◆ Supporting block

◆ Supporting cap

◆ Left & Right (The picture is the right type)

9 series

13 series

162 / 163

PZCZ004

75 16.5

24.8（27.5）

PZCZ00509

PFWK00109A

PZCZ00513A

PFWK00113B

★

PZCGR00113

PZCGL00113

PZCG00213

PZCG00209

22 2218 18

Frame Accessory Series

9 series

13 series

◆ Supporting block

◆ Suitable for fire-resistant open-in side-hung windows

◆ Anti-misoperation block

◆ Supporting block

◆ Supporting cap

◆ Left & Right (The picture is the right type)

◆ Supporting cap

Shim PKMB002-05

PTSK002

PTSD001

2.2

6.5

PKK001

14.8

PKMB002

PTSK001

★★

Frame Accessory Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Lifting block ◆ Frame panel

◆ Common to 9 series and 13 series

◆ Gasket orders need be placed as required,

and the quantity is 2 pcs

◆ Lifting block

◆ Fixting block

164 / 165

PFSG001

PKG001

PSLJK02

PKLJK02

PCDQXWK001

11.7

Frame Accessory Series

◆ Frame connector

◆ Suitable for fire-resistant

open-in side-hung windows

◆ Applicable height adjustable

◆ Sash connecting block

◆ Suitable for fire-resistant

open-in side-hung windows

◆ Applicable height adjustable

◆ Limiting block

◆ Realize transmitter 90° limiting

◆ Water cap

◆ Hole cap

Wooden Window / Composite Window Wooden window/Composite Hardware series: Suitable for all kinds of windows,

surface treatment for visual hardware adopts bronze color with weather resistance.

Hardware used in drive or transmission system adopts surface treatment of

advanced anticorrosive electroplating. The surface treatment shows high

performance of solid Wood and composite profile.

166 / 167

Wooden Window / Composite Window

Wooden Window / Composite Window Configuration

20-1、WCPX100Series, Turn&Tilt system of Solid Wood........................................P168-169

20-2、WCPX200 series solid wood/aluminum clad wood concealed open in top hung window hardware system .....P170-171

20-3、WCXP100 Series, Aluminium-clad Wood window..............................................P172-173

The Instruction of Turn-and-Tilt window and Tilt-and-Turn Window system ...............P174-175

20-4、WCPN100 Series, Open-in Side-hung System of Solid Wood/Aluminium-clad Wood window........P176-177

20-5、LWCPX100 Series, Turn&Tilt system of Wood-clad.........................................P178-179

20-6、LWCPX200 series wood clad Aluminum concealed open in top hung window hardware system ..........P180-181

20-7、LWCPX100 Series, Turn&Tilt system of Wood-clad.........................................P182-183

20-8、LWCXP100 Series, Wood-clad Aluminium open-in side-hung window.....................P184-185

Product Series

Pivot Hinge Series .................................................................................P186

Transmitter Series Pull Rod、Limiting Piece Series ...................................................P187

Transmitter Series .........................................................................................P188

Door lock Series .........................................................................................P189

Frame Accessory Series ...................................................................................P190-192

10 05

20-1、WCPX100 Series Turn-and-Tilt Window

168 / 169

Handle

PZSNJ008

Hardware Configuration for WCPX100 Series

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NCDQN51509-12 1 Depends on window system

03 Anti-misoperation block PFWK004 1

04 Anti-misoperation device PFWQ003 1

05 Corner device NPZJQ204 1 Left & Right

06 Corner device NZJQ201 1

07 Connector rod NLGNXR10904-06 1 Left & Right, divided into9、13series

08 Upper pivot hinge NHYSNR002 1 Left & Right, please indicate the color while placing order

09 Bottom pivot hinge NHYXNR0029 1 Left & Right, divided into9、13series, please indicate

the color while placing order

10 Locking plate PSK00424 4 Depends on the quantity of locking points

11 Lifting block WTSK001 1

12 Rotated lock block NQZSZ00424 1

13 Corner device NPZJQ203 1

14 Side transmission rod NPBCDG004 2 Depends on window system

Configuration instruction

1. Above configuration is applicable to \"9\" series PVC profile , besides there is”13\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

6. Every 5000 times of repeated opening and closing lubrication maintenance, to ensure the normal service life of products.

Optional Handle

09 05

20-2、 WCXP200 Series solid wood/aluminum clad wood

concealed turn and tilt Window

170 / 171

Handle

PZSNJ008

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NCDQN51509-12 1 Depends on window system

03 Anti-misoperation block PFWK004 1 Left & Right

04 Anti-misoperation device PFWQ003 1

05 Corner device NPZJQ204 1 Optional

06 Corner device NZJQ201 1

07 Concealed connector rod PYLGNXR005905-07 1 Left & Right, divided into9、13series

08 Concealed Bottom hinge PYHYXR0049P 1 Left & Right

09 Locking plate PSK00424 4 Depends on the quantity of locking points

10 Lifting block WTSK001 1

11 Rotated lock block NQZSZ00424 1

12 Corner device NPZJQ203 1

13 Side transmission rod NPBCDG004 2 Depends on window system

Hardware Configuration for WCXP100 Series

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"9\" series PVC profile , besides there is”13\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from520mm to 720mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 410mm-720mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

6. Every 5000 times of repeated opening and closing lubrication maintenance, to ensure the normal service life of products.

10 05

20-3、WCXP100 Series Tilt-and-Turn Window

172 / 173

Handle

PZSNJ008

Hardware Configuration for WCXP100 Series

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NCDQN51509-12 1 Depends on window system

03 Anti-misoperation block PFWK004 1

04 Anti-misoperation device PFWQ003 1

05 Corner device NPZJQ204 1 Optional

06 Corner device NZJQ201 1

07 Connector rod NLGXNR10904-06 1 Left & Right, divided into9、13series

08 Upper pivot hinge NHYSNR002 1 Left & Right, please indicate the color while placing order

09 Bottom pivot hinge NHYXNR0029 1 Left & Right, divided into9、13series, please indicate

the color while placing order

10 Locking plate PSK00424 4 Depends on the quantity of locking points

11 Lifting block WTSK001 1

12 Rotated lock block NQZSZR00424 1

13 Corner device NPZJQ203 1

14 Side transmission rod NPBCDG004 2 Depends on window system

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"9\" series PVC profile , besides there is”13\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 150kg, the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

38 38

Tilt and Turn & Turn and Tilt Window Hardware System Characteristics

Instruction for Wooden Profile/ Aluminum-wooden profile

Drilling and installation

Instruction

1. Pivot hinge---drilling holes for bottom hinge frame with the duplicator WKMQ001 for wooden profile, to

ensure the accuracy of the hole size , before the bottom hinge installation , ensure that all adjustment points

are at the initial position.

2. Handle---drilling holes for open-in handle for wooden profile according to the center of the transmitter, square

hole is concentric with handle spindle hole, the handle knob will be installed straightly with 90 degree.

3. Transmission rod surface with high anti-corrosion coating, corrosion resistance will be more stronger.

Positioning blocks need to be

close to the U-groove tightly

Drilling illustration

for upper hinge

Handle drilling illustration

Drilling depth of upper hinge: 5mm

Striker for frame

PSK00118A(18mm)

PSK00220 (20mm)

PSK00424(24mm)

Drilling illustration for bottom hinge

The installation location of tilting

locking plate and overturn supporter Drilling depth of bottom hinge:5mm

174 / 175

±1.5mm

X X

±1

+4 -2

Code Applicable

width

X(Maximum Cutting dimension)

Remarks

NLGNXR10904-06 430-600 170 The same

applicable

width, the

same X

NLGNXR10906-08 601-800 200

NLGNXR10908-10 801-1000 200

◆ The cutting mould refer to page 195

Adjust and cutting

Wooden profile connecting rod cutting / adjustment illustration

Effectively reduce

the sash inclining

by adjusting screw

Can effectively adjust the airtightness, water- tightness

and the compaction of the

frame and sash

◆ The cutting mould refer to page 195

Code Applicable

width

Length of

rod

X(Maximum Cutting dimension)

Remarks

NCDQN51507-09 700-900 602 105

NCDQN51509-12 901-1200 902 150

NCDQN51512-14 1201-1450 1150 124

NCDQN51512-16 1201-1600 1302 200

Wooden profile transmitter cutting / adjustment illustration

Adjusting the

amount of overlap

between locking

point and locking

plate, improved

the performance

of the tightness for

the entire window

Lock point

Wooden profile bottom hinge installation / adjustment

ilustration

3D hinge can improve the air-tightness

and water-tightness, greatly reducing

the installation errors

06 07

20-4、WCPN100 Series Open-in Side Hung Window

176 / 177

Hardware Configuration for WCPN100 Series

Handle

PZSNJ008

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NCDQN51509-12 1 Depends on window system

03 Corner device NPZJQ204 2 Optional

04 Upper corner hinge NHYSNR0029 1 Left & Right, divided into9、13series, please indicate

the color while placing order 05 Bottom pivot hinge NHYXNR0029 1

06 Locking plate PSK00424 5 Depends on the quantity of locking points

07 Lifting block WTSK001 1

08 Limiter NFC00112 1 Depends on window system

09 Mid pivot hinge NHYZ0029 1 Please indicate the color while placing order

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"9\" series PVC profile , besides there is \"13\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm

and width ranged from 650mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 450mm-1000mm,according to the parameters of each accessory. for details,please refer to the product series

of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

07 08

12 13

02 20-5、LWCPX100 Series Turn-and-Tilt Window

178 / 179

Handle

PZSNJ008

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NPCDQN41509-12 1 Depends on window system

03 Anti-misoperation device PFWQR001 1 Left & Right

04 Anti-misoperation block PFWK00118A 1

05 Corner device NPZJQ204 1 Optional

06 Corner device NZJQ201 1

07 Connector rod NPLGNXR10904-06 1 Left & Right, divided into9、13series

08 Outer cover PHYSN002-03A 1

Please indicate the color while placing order

09 Upper pivot hinge NPHYSN003 1

10 Bottom pivot hinge NPHYXNR0109 1 Left & Right, divided into9、13series, please indicate

the color while placing order

11 Locking plate PSK00118A 4 Depends on the quantity of locking points

12 Lifting block WTSK001 1

13 Rotated lock block NQZSZ00318 1

14 Corner device NPZJQ203 1

15 Side transmission rod NPBCDG004 2 Depends on window system

Hardware Configuration for LWCPX100 Series

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"9\" series PVC profile , besides there is\"13\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 90kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

10 11

02 20-6、LWCPX200 series wood clad Aluminum concealed turn and tilt window

180 / 181

Handle

PZSNJ008

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NPCDQN41509-12 1 Depends on window system

03 Anti-misoperation device PFWQR001 1 Left & Right

04 Anti-misoperation block PFWK00118A 1

05 Corner device NPZJQ204 1 Optional

06 Corner device NZJQ201 1

07 Concealed Connector rod PYLGNXR004905-07P 1 Left & Right, divided into9、13series

08 Concealed Bottom pivot hinge PYHYXR0049P 1 Left & Right

09 Locking plate PSK00118A 6 Depends on the quantity of locking points

10 Lifting block WTSK001 1

11 Rotated lock block NQZSZ00318 1

12 Corner device NPZJQ203 1

13 Rotated lock block PFC0900FB 1

14 Side transmission rod NPBCDG004 1

Hardware Configuration for LWCXP200 Series

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"13\" series PVC profile , besides there is\"9\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from520mm to 720mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 410mm-720mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 90kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

6. Every 5000 times of repeated opening and closing lubrication maintenance, to ensure the normal service life of products.

11 05

12 13

07 08

10.1

20-7、LWCXP100 Series Tilt-and-Turn Window

182 / 183

Handle

PZSNJ008

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NPCDQN41509-12 1 Depends on window system

03 Anti-misoperation device PFWQR001 1 Left & Right

04 Anti-misoperation block PFWK00118A 1

05 Corner device NPZJQ204 1 Optional

06 Corner device NZJQ201 1

07 Connector rod NPLGXNR11304-06 1 Left & Right, divided into9、13series

08 Outer cover PHYSN002-03A 1

Please indicate the color while placing order

09 Upper pivot hinge NPHYSN003 1

10 Bottom pivot hinge NPHYXNR01013 1 Left & Right, divided into9、13series, please indicate the

color while placing order

11 Locking plate PSK00118A 4 Depends on the quantity of locking points

12 Lifting block WTSK001 1

13 Rotated lock block NQZSZR00318 1 Left & Right

14 Corner device NPZJQ203 1

15 Side transmission rod NPBCDG004 2 Depends on window system

Hardware Configuration for LWCXP100 Series

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"13\" series PVC profile , besides there is\"9\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and

width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product

series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 90kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

06 07

20-8、LWCPN100 Series Open-in Side Hung Window

184 / 185

Handle

PZSNJ008

Hardware Configuration for LWCPN100 Series

Number Product Name Code QTY Remark

01 Handle PZSN006 1 Optional, please indicate the color while placing order

02 Transmitter NPCDQN41509-12 1 Depends on window system

03 Corner device NPZJQ204 2 Optional

04 Upper corner hinge NPHYSNR00313 1

Left & Right, divided into9、13series, please indicate

the color while placing order 05 Bottom pivot hinge NPHYXNR01013 1

06 Locking plate PSK00118A 5 Depends on the quantity of locking points

07 Lifting block WTSK001 1

08 Limiter Refer to Limiter Series 1 Depends on window system

09 Side transmission rod NPBCDG004 2

Optional Handle

Configuration instruction

1. Above configuration is applicable to \"13\" series PVC profile , besides there is\"9\" series configuration.

2. Items in green are optional.

3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm

and width ranged from650mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm

and the width 450mm-1000mm,according to the parameters of each accessory. for details, please refer to the product series

of this catalogue. It is recommended to keep the window ratio (width/height).(W)1:1.5(H)

4. The maximum load bearing capacity of this configuration is 90kg,the load bearing capacity depends on

the pivot hinge, please refer to pivot hinge series:

the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety

coefficient) ≤the maximum load bearing capacity of the pivot hinge.

5. The above is only for reference. please consult our technical department for sepecific requriement.

NHYSNR002

NHYSNL002

NHYXNR0029

NHYXNR00213

NHYSNR0029

NHYSNR00213

NHYZ0029

NHYZ00213

Pivot Hinge Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Upper pivot hinge

◆ Left & Right

◆ Used with bottom hinge or pull rod

◆ Please indicate the outer cover color while placing order

◆ Open-in windows & doors

◆ Mid pivot hinge

◆ Please indicate the outer cover color while placing order

◆ Open-in windows & doors

◆ Bottom pivot hinge

◆ Left & Right

◆ Maximum load bearing

capacity:150kg

◆ Please indicate the outer

cover color while placing

order

◆ Open-in windows & doors

◆ Upper pivot Hinge

◆ Used with bottom

pivot hinge

◆ Left & Right

◆ Please indicate the

outer cover color

while placing order

◆ Open-in windows & doors

186 / 187

Assembly dimension(Unit :mm )

Type A B C D E

NFC00108 203 183 163 165 45

NFC00110 254 234 214 210 45

NFC00112 305 285 265 255 45

Assembly dimension(Unit :mm )

Type A B C D E

NFC00208 203 183 163 165 26

NFC00210 254 234 214 210 26

NFC00212 305 285 265 255 26

Connecting Rod(Turn-and-Tilt Window Series)

◆ Left & Right

Applicable width Series code Applicable width Series code

430 - 600 NLGNXR10904-06 430 - 600 NLGNXR11304-06

601 - 800 NLGNXR10906-08 601 - 800 NLGNXR11306-08

801 - 1000 NLGNXR10908-10 801 - 1000 NLGNXR11308-10

Connecting Rod(Tilt-and-Turn Window Series)

◆ Left & Right

Applicable width Series code Applicable width Series code

430 - 600 NLGXNR10904-06 430 - 600 NLGXNR11304-06

601 - 800 NLGXNR10906-08 601 - 800 NLGXNR11306-08

801 - 1000 NLGXNR10908-10 801 - 1000 NLGXNR11308-10

Connecting Rod、Limiting Piece Series

Split structure

Backset is 15mm

Transmitter not include Anti-misoperation device,anti-misoperation

device needs to be ordered seperately.

Applicable height Length of rod Quantity of locking

point Series code Remarks

490-730 430 0 NCDQN51505-07

Integrated Type

Suitable for

Open-in windows

700-900 602 1 NCDQN51507-09

901-1200 902 1 NCDQN51509-12

1201-1450 1150 1 NCDQN51512-14

1201-1600 1302 1 NCDQN51512-16

1527

Backset is 15mm

Applicable

height

Length of

rod

Quantity of

locking

point

Series code

Remarks

Inward type Anti-theft type

400-600 356 2 NCDQND41504 NCDQFD41504

Single side transmission type

suitable for open-in

side-hung windows

601-800 586 2 NCDQND41506 NCDQFD41506

801-1000 786 2 NCDQND41508 NCDQFD41508

1001-1200 986 3 NCDQND41510 NCDQFD41510

1201-1400 1186 3 NCDQND41512 NCDQFD41512

1401-1600 1386 4 NCDQND41514 NCDQFD41514

1601-1800 1586 4 NCDQND41516 NCDQFD41516

1801-2000 1786 4 NCDQND41518 NCDQFD41518

2001-2200 1986 4 NCDQND41520 NCDQFD41520

1527

Anti-misoperation device PFWQ003

Inward

Type(ND)

Transmitter Series Anti-Theft

Type(FD)

Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

188 / 189

◆ Includes lock strike plate

Applicable height Length of rod Centre distance Series code Remarks

1400-2800 235 55 PMS7255 Suitable for wooden

doors

◆ Includes lock strike plate

◆ Only for a small lock and lock cylinder selecting please refer to the lock hole figure size

Applicable height Length of rod Centre distance Series code Remarks

1400-2800 180 45 PMS5845 Suitable for fire rated

doors

◆ Includes lock strike plate

◆ The refractory time 1.5h

Applicable height Length of rod Centre distance Series code Remarks

1400-2800 235 65 PMS7265F Suitable for fire rated

doors

Mute type Economical type Fire rated type

Door lock Series

PSKFD00118

PSKFD00120

PSK00220

PSK00118A

PSK00318

PSK00424

PSK00118A

Frame Accessory Series ◆ Locking plate

◆ Locking plate

◆ Anti-thief locking plate

190 / 191

PFWK00324

NQZSZ00424

PFWK00220A

PFWK00118A

NQZSZ00320

NQZSZ00318

NQZSZ00320

NQZSZR00318

NQZSZR00320

NQZSZR00318

Frame Accessory Series

◆ Anti-misoperation block

◆ Tilt lock block

◆ Left & Right, (The picture is the right type)

NQZSZR00320

NKMB00109

NQZSZR00424

NKMB00113

WTSK001

PFWK004

Frame Accessory Series Note: For order quantity less than1000 sets with standard color, the production time symbol ★★＜ 7days, ★＜ 10days, none ＞ 15days,

The actual production time should be evaluated and the instructions above is for reference only.

◆ Tilt Lock block

◆ Left & Right, (The picture is the right type)

◆ Anti- misoperation block

◆ Lifting block

◆ Cover plate

◆ Additional cushion can make it apply to fake mullion doors

◆ Additional cushion shall be ordered separately(PZD001)

◆ Cover plate

◆ Additional cushion can make it apply to fake mullion doors

◆ Additional cushion shall be ordered separately(PZD001)

192 / 193

Solution for High Quality Solid Wood Products

Increasing the length of the hinge's part which is in the sash, and

add the integral fixing block, to ensure the hardware and the

profile connection is strong, also to make the appearance of the

product more noble.

Higher Strength

The load bearing capacity of the hinge can reach 150kg, and L

type hinge seat is added transverse screws for connection. by

bidirectional connection with frame profile, it can improve the

connection strength between hardware and profile and ensure the

performance of the whole window connection.

High load bearing capacity

New structure design of anti-misoperation

makes the anti-misoperating

device is available for both left and right and

quick to install, and it can be

effectively used with 9mm-14mm installation

space to prevent mis-operation.

The product adopts the surface treatment of

electroplated nickel alloy with high

corrosion resistance. the experiment of neutral

salt spray reached 1000h.

diversified lock points, can be selected with

conventional, anti-lever, rolling anti-lever type

lock points, to meet the demands of more usage

requirements.

Secure Anti-Misoperation

High Corrosion Resistance

& Multi-Functions

Frame

Initial state

Pre-opening state

Wooden Window Duplicator Name of the fitting Series Code

Duplicator WKMQ002

This duplicator is suitable for installing pivot hinge:

NHYSNR(L)002、NHYXNR(L)0029/13、NHYZ0029/13

194 / 195

Cutting mould

PCDM001

The Cutting Mould

Connecting port

Rotate to englarge

1、Movable rod feed port

2、Fixed rod feed port

Footboard

use pneumatic control footboatd to

cut the rod.

Cutting length is adjustable according

to the need.

Name of the fitting Series Code

Duplicator PCDM001

Used for cutting transmitter、connecting rod、linking rod materail.

Completed Projects Sri Lanka Private Beach Residence Villa At Mabola

Saudi Arabia Almashriqiya Housing Project

Indonesia TOD Pondok Cina Apartment

UAE Akoya Xoygen Villas

UAE Al Falah Towen Center 899 Villas

UAE Sheikh Housing 360 Villa

UAE Nova Villas

UAE Sheikh Zayed Housing Programme Ajman 280 Villa

UAE MAF-Tial Al Ghaf Elan 916 Tonhouses

India Streeling Acentia

India Streeling Villa Grande

India Sumadhura Eden Garden

India Sumadhura Aspire

India Sumadhura Sushantam

India Sumadhura Horizon

India Godrej United

India Spectra Raaya

196 / 197

Completed Projects

India Vaswani-Equisite

India Adarsh Palm Acres

India African Avenue

India Ats Homekrafts

India Cpwd -Ddu Housing

India Hero Homes

India Consicient Hines

India Joy Villa Homes

India Aiims Jodhpur

India M3M Urbana Premium

India Dlf Ultima

India Strategic Royal Court

India Bcc Ghaziabad

India Ats Dolce

India Mapsco Casabela

India Cpwd-Ddu Housing

All products have been patented in China, and imitation is strictly forbidden.

otherwise, any violators will bear the legal responsibility.

Printed in JAN, 2024.

No.3, Jian Lang Rd., Tangxia Town, Dongguan City, China.

T：0086-769-82166666 82136666

F：0086-769-82955240 82955241

E：mail@kinlong.com

H：www.kinlong.com

快速跳转到指定页