Our Manufacturing Capability

Our stainless steel processing equipment integrates modern manufacturing technology with a strong focus on product innovation. Equipped with advanced machinery and supported by a team of skilled technicians, we produce stainless steel products that meet high standards of precision, durability, and dimensional accuracy. From precision cutting and welding to bending and surface finishing, every manufacturing step is strictly controlled to ensure consistent quality.

Our Stainless Steel Processing Equipment

We produce our stainless steel products using a complete in-house fabrication line. The following key equipment ensures high precision, consistent quality, and efficient production.

1. Stainless Steel Tube Cutting Machine Function: Precisely cuts stainless steel round tubes and square tubes. Benefit: Clean cut surface, high efficiency, accurate dimension, minimal material loss.

2. Laser Welding Machine
Function: Precision welding of stainless steel sheets and tubes.
Benefit: Small weld seam, minimal deformation, smooth appearance, strong joint, reduced grinding work.

3. CNC Bending Machine Function: Bends stainless steel plates into various angles and box-shaped structures. Benefit: High angle accuracy, excellent consistency, ideal for batch production.

4. Laser Cutting Machine Function: Cuts arbitrary shapes, openings, and blanks from stainless steel plates. Benefit: High cutting precision, fast operation, capable of complex patterns, no burrs.

5. Deburring Machine

Function: Removes sharp edges and burrs after cutting or tube processing.
Benefit: Safe handling without injury risk, smooth surface finish, improved product quality, easier welding and assembly.

Huru mMan-uCfaecntueriendgDCeaspiganb

Our extensive engineering expertise and years of experience in stainless steel fabrication, every custom stainless steel product we design is rooted in a human-centered design philosophy. We don't just manufacture — we understand how kitchen professionals work.

—Thoughtful Design Details—

1. Rounded corners design to protect operators

2. Removable #304 SS dust screen – Filtration for fresh air

3. The floor gully drainage accessories are integrally molded

4. User-friendly custom stainless steel design

STAINLESS STEEL PRODUCTS

Standard Features

Closed cabinets

The bottom layer of the closed cabinet should be made of steel plates, the side panels and partitions should be with reasonable dimensions, and the shelves should be non-movable.

Sink and water board

- All Sink water boards should be manufactured according to the specification book, and the bottom side of the water board should be completely soundproofed. The dimensions of the sink should be indicated in the data sheet or indicated in the diagram. - The sink should be completely covered at vertical and horizontal corners. The drip board should be thrown at a ratio of not less than 1:10 to the drain. All sink drains should be placed in the corners with stainless steel overflow pipes. All sinks should have 100mm high water flaps (unless otherwise specified). All sinks should not have standing water in the Sink after draining.

Grease trap (if required)

The grease trap must be made of stainless steel and comply with local regulations, and all grease traps must be easily removed and cleaned without the use of any tools

Workbench and lower panel

‒ The underlay plate of the workbench should be manufactured according to specifications. The four sides need to be folded down by 40mm. -The shelves shall be cut and folded and firmly welded to the feet, and the joints shall be firmly connected. -All stainless steel surfaces and shelves should be sealed with stainless steel U-plates within the 40 mm edge.

Suspended shelves

‒ The suspended shelf should use 1.2mm thick stainless steel with an edge thickness of 40mm. -The bottom of the shelf should be sealed with 1.0mm thick stainless steel.

Stainless steel countertop

-All stainless steel countertop is integrally welded, and the lower part is welded stainless steel support reinforcing bars so that the countertop can support heavy objects without bending and deforming. The surface should be flat, smooth, and not uneven.

-All product against the wall needs to bring a 100/300mm high-grade water back, a insect-proof fixing plate between the welding table and the wall, and the water back is selected according to the requirements of the equipment next to it. -The angle between the table and the water retaining back should be made with R6mm hygienic inner rounded corners.

Cabinet inner shelves

-The shelves inside the cabinet should not be movable. The edge thickness is 40mm.
-All stainless steel shelves should be sealed with stainless steel U-plates within the 40 mm perimeter

Wall-mounted shelves

-The suspended shelf should use 1.2mm thick stainless steel with an edge thickness of 40mm. -The 40 mm edge of the laminate should be sealed with a stainless steel U-plate.

Reinforcing bar

All work surfaces need to be fitted with reinforcing bars, which are installed in the center of the table and cannot be more than 760mm away from the sides. The stiffener is made of 1.5mm thick stainless steel, and the cutting table needs to be equipped with an 18mm thick solid wood plate, sealed with a 0.8mm stainless steel plate, and the square leg tube is equipped with round shock-absorbing rubber pads.

Drawers

-The drawer should be mounted on an assembled 2.0mm thick stainless steel rail with a silent ball shaft of sufficient length to prevent derailment when the drawer is pulled out.
-The rail should be made of stainless steel and retractable, fully stretched, and with a load capacity of not less than 60kg. The drawer can be drawn out of the full length of its length.
-Unless otherwise stated, the refrigerator drawer slide should have a load weight of 50kg.
-The drawer combination should close automatically when opened and be easily removed without tools. - Unless otherwise stated, the internal tray of the drawer should be GN1/1.

Equipment wheels

-Equipment castors should be top domestic brands. -Castors should be 5" (127.0mm) or 6" (152.4mm) diameter heavy-duty, ball bearings, disc wheels, and tires with replaceable oil-proof rubber or neoprene with a minimum width of 1-3/16 (30.2mm) tire patterns. -The minimum load capacity per castor is 250 lbs (112.5kg) unless otherwise stated. Grease injection attachments, thread guards and polished plated finishes are also available. Wheel-locking devices are provided in places.

Doors

All metal doors are reinforced with stainless steel to prevent bending. The outer surface is 1.0mm thick stainless steel, welded at the corners, and sanded and polished. The door is about 20mm thick. The cover door should be recessed (open kitchen cabinet doors are in the form of door cover frames), and heavy-duty stainless steel doors and heavy-duty magnetic latches (open kitchen cabinet doors are installed with hydraulic automatic closing doors). The sliding door should be mounted on a 20mm thick stainless steel overhead track and use a ball silent roller, and the sliding door should not be easily removed by tools. All sliding doors should be equipped with plunger locks.

Cabinet/legs and cross supports

-Unless otherwise specifically required, it should be a 38x38mm stainless steel square pass, the cross support should be a 32x32mm stainless steel square pass, and all welds of the cross support should be continuous and polished smooth. Spot welding cannot be used. -The feet should be 38x38mm stainless steel square and 150mm high adjustable equipment feet, and the equipment feet should be welded to the reinforced cap groove and then welded to the bottom of the equipment. Or there may be a special request for clarification.

WORK BENCH

Work Bench With Under Shelf （Round leg)

Work Bench With Under Shelf (Square Leg)

181

Work Bench With Splashback （Round leg)

-Easy to assemble;
-Noise dampening wood inside（Optional), -All materials AS/S stainless steel,
-All benches come in knock down packaging for the convenience of transportation and storage,

-Custom-made size acceptable, 十

Work Bench With Splashback (Square Leg)

182

Work Bench With 2 Under Shelves

Mobile Work Bench With 2 Under Shelves

183

Mobile Work Bench With Under Shelf

Work Bench With Under Shelf

Work Bench With Under Shelf(Square Leg)

184

Corner Work Bench With Splashback & Under Shelf

Work Bench With Double Over shelf

Comer Work Bench & Under Shelf

185

Work Bench

Long Work Bench

Over Shelf

187

2 Tier Over Shelf

Two-shelf Work Table

Right side: 4-tier GN slides (1/1, 1/2, 1/3) With Backsplash

Cutting Board Bench

Preparation Bench With Cutting Board

Fish Processing Table

SHELVING

4 Tier Shelving

Height-Adjustable

4 Tier Shelving

Round Tube Frame

Welded 4-Tier Shelving

Square Tube Frame

Wall Shelf

Pipe Wall Shelf

SINK BENCH

Single Sink Bench

Double Sinks Bench

Triple Sinks Bench

Single Sink Bench With Pot Shelf

190

Double Sinks Bench With Pot Shelf

Triple Sinks Bench With Pot Shelf

Triple Sinks Bench With Pot Shelf

Double Sinks Bench With Under Shelf

Triple Sinks Bench With Under Shelf

191

Single Sinks Bench With Under Shelf

Double Sinks Bench With Under Shelf

Triple Sinks Bench With Under Shelf

Triple Sinks Bench(American Style)

Stainless steel, hot and cold water input

192

STORAGE CABINET

Bench Cabinet With Sliding Doors

Bench Cabinet With Sliding Doors & Splashback

Cabinet With Doors & Drawers & Splashback

Bench With Under Shelf &Drawers & Splashback

193

Bench Cabinet With Drawers

Mobile Bench With
Drawer &
Under Shelf

Work Bench With Drawer &

Splashback &Under Shelf(Round Leg)

Storage Cabinet & Mobile Bench

Mobile Bench With Under Bench Rack 电

Work Bench With Drawer & Splashback & Under Shelf (Square Leg)

194

Wall Cabinet

Wall-Mountable Design Built-in hooks

Mobile Cabinet With Drawers & Shelves

Upright Storage With Pattern

195

Mobile Cabinet With Drawer & Shelves

Bench Cabinet With Drawers & Over Shelves

TROLLEY

3 Layers Food Service Trolley

Dish Collecting Trolley

2 Layers Food Service Trolley

Dish Collecting Trolley

Seasoning Trolley

Kettle Trolley

196

Warehouse Trolley

Pan Trolley

197

Warehouse Trolley

Warehouse Trolley

Pan Trolley

Pan Trolley

5 Level Steam Frame

Pan Trolley

Pan Trolley

Pan Trolley

More Options

Filters

Led Light

Make For the Wind

Optional Configuration

wall mounted hood

island hood

wall mounted hood with fresh air

island hood with fresh air

wall mounted hood

island hood

wall mounted hood with fresh air

island hood with fresh air

FAQ

How to exhaust smoke from hood ?

The hood itself has no power and cannot take the initiative to smoke away the fume. The conventional thinking is that the poor effect of smoking fumes is a problem with the hood itself. In fact, this is not entirely true. The fume enters the air duct through the hood and then is discharged. The fan discharges outside. A well-designed hood can extract more oil fume with smaller air volume!

Peripheral air compensation ?

Peripheral diffusion of compensation air at very low velocity (0.3 to 0 . 5 ~ { m / s } ) by large surface area modules, guaranteeing the absence of draughts for unequaled user comfort.
The generation of a vertical laminar airflow increases the efficiency of the ventilation and allows the reduction of exhaust air flow rates

What is the exhaust volume of the hood ?

The exhaust volume of the hood has a dynamic range, which depends on the exhaust requirements of the stove under the hood. If the exhaust volume is too small, the oil smoke cannot be extracted. In addition to wasting energy, the exhaust volume that is too large will also cause louder noise.

Lighting needs for island hoods ?

When used in back-of-house kitchens, white tube lights are usually coordinated with the color temperature of the surrounding lights; if used in open kitchens or open spaces, warm-toned light is usually used to match the atmosphere of the decorative design. Please consult the lighting designer.

Does the island type hood need fresh air ?

If it is used in an open kitchen or with an open stall, the outer periphery of the hood is usually covered with decorative materials, so air supply is usually not required. If it is used in a back-of-house kitchen, air supply is usually required.

How to calculate the exhaust air volume and supplementary air volume of the hood ？

Please consult our professional design team! We will calculate the appropriate exhaust air volume and supplementary air volume based on the characteristics of the stove used.

Hood with UV function

Exhaust & air management ^ + intelligent air curtain make-up air ^ + grease filter ^ + UV purification ^ + Fire system. Best for High‑end Hotel & Resort Kitchens

Hood with UV function - Structural Diagram

CABINET-TYPE CENTRIFUGAL FAN

DT series low noise (fire smoke exhaust) cabinet centrifugal fan
DT series low noise (fire smoke exhaust) cabinet type centrifugal fan. It has the dual functions of fire-fighting smoke exhaust and ventilation. It is an updated product of fire-fighting smoke exhaust fans for high-rise buildings. This series of fans includes two sub-series: DT forward tilt series and DT-BF backward tilt series.

Product Features

1. The cabinet body adopts a profile frame and panel assembly design, which has a beautiful appearance. The frame material is aluminum alloy, the panel is a multi-layer duplex structure, and the interior is filled with sound absorptive materials (fire smoke extractors are filled with fire and sound reduction materials), which can effectively insulate heat and reduce noise.
2. The cabinet is equipped with a large maintenance door, which is convenient for the maintenance and overhaul of the internal components. The access door is fastened with a movable lock for easy access.
3. The transmission mode is belt drive, and its advantage is that the fan parameters can be adjusted by changing the speed to make up for the selection error. However, the belt is a worn part and needs to be replaced regularly.
4. This series of cabinet fans, according to the different inner tanks installed, is divided into two sub-series:
DT Forward Series: DTC and TAE series liners certified by AMCA. The impeller is a forward-leaning multi-wing design, with large air volume, high pressure, and low noise. There are 9 machine numbers such as 10", 12", 15", 18", 2 0 ^ { \star } , 22\*, 25", 28", 30", 32\*, 36", 40\*, 13", etc. DT-BF backward tilt series: using a TDF series liner certified by the United States AMCA, the impeller is a backward-tilting veneer structure, with high efficiency, and high static pressure. Large air volume. The surface of the blade is not easy to accumulate oil, and it is easier to clean. Total 9". 10”、12”. 14”.15”、18”、20”. 22”.25”、28”、32°. 3 6 ^ { \star } .40", 44", 4 9 ^ { \star } , and other 15 machine numbers.

Selection considerations:

1. System design and fan selection should be carried out by professionals, and the system resistance should be estimated as accurately as possible, otherwise improper selection will lead to poor actual use of the fan.
2. The pressure loss of the resistance parts in the system is not a fixed value, and the resistance coefficient should be used for selection and calculation.
3. The cabinet fan should not be operated for a long time in the full-open form (that is, the air inlet and outlet of the fan are not connected to the pipeline). Because the performance of the fan is unstable in this state, and in this case, the motor of the standard configuration of the fan is in an overloaded state, long-term use will cause the motor to burn out. Short test runs are allowed. 4. Pay special attention to the fact that the B-type fan cannot be selected for range smoke and fire fighting purposes.

Technical note

1. The performance parameters of the fan provided in this data are under standard conditions (that is, the medium is clean air at standard atmospheric pressure, and the temperature is equal to 2 0 ^ { \circ } \mathsf { C } ; Gas density is equal to 1 . 2 {kg / m } ^ { 3 } , ). The test method meets the requirements of the Figure Fig. 12 installation method (free intake, pipeline outlet) in the AMCA8 standard. 2. The noise is the A-weighted sound pressure level, and its data is that the B(12) standard fan (three-layer plate) is measured at 1 meter away from the fan when the air inlet and outlet are connected to the pipeline, and the actual production error of the fan may lead to the deviation of soil 30B. The noise of a single-layer board is 3 to 5dB louder than that of a three-layer board. It should be noted that sound pressure levels vary with test chamber characteristics, reflections, and natural frequencies.

207

DT-II DUAL SPEED FAN PERFORMANCE PARAMETER TABLE（3）

LOW NOISE EXPLOSION-PROOF PIPE FAN-80

STRONG ANTI-POLLUTION·LONG CLEANING CYCLE·CORROSION RESISTANT

O

STRONGANTI-POLLUTIONLONG CLEANING CYCLE

25mmwide spacing design effectively reduces water wash and oil accumulation, extending the cleaningcycle. (Mayvary depending on operating conditions)

ROUNDTUBESTAINLESS STEEL COLLECTION CELL

Utilizes ample collection space with larger surfacearea.Uniformelectricfielddistribution aroundeachtube ensuresstrongerand more consistentcollectionperformance.

HIGH-EFFICIENCYIONIZATIONZONE MAJORITYOILFUMEREMOVAL

High-voltageelectrostaticfield generates ions that charge oil particles, which are then efficiently collected.

DEEPPURIFICATIONZONEREMOVALOFRESIDUALFINEFUMES

The high-voltageelectricfield further capturestheremaining fine oil particles, achievingdeep-level purification

Premium High Efficiency LowMaintenance Energy Saving StainlessSteel Up to 98% Extended Cleaning High Efficiency Corrosion Resistant Oil Fume Removal Intervals Low Pressure Drop

Ultra-Clean Series - 90%

90 % Purification Efficiency

High-efficiency compliance · Reduced Odor

Dual-Mode Ultra Series - 95%

9 5 % Purification Efficiency

Low-altitude discharge * * Visually smokeless

Dual-Mode Ultra-Clean Series - 98%

98% Purification Efficiency

Designed for high-concentration oil fume cuisines · Low-altitude discharge

213

Dual-Mode Ultra-Clean+ Series - 99%

99% Purification Efficiency

Visually smokeless under light · Designed for demanding emission environments

Oil Fume Purification Integrated Machine

90 % Purification Efficiency

• Uniform airflow entry via oil mesh
• Double-layer electrostatic precipitator
• Double-layer UV photolysis ^ + activated carbon brick for odor removal
• Low-noise fan unit , Visually smokeless

Zero consumables * * Oil/water recovery * * No secondary pollution

Oil Fume Purification Integrated Machine

Duct-Type Integrated Oil Fume Purifier

(Pipeline Fume Purification Unit)

Combining a purifier and a low-noise fan unit into one complete system.

Key Features :

• Integrated oil fume purification system & exhaust system • (UV odor removal system available as an option) • Simple operation * Easy maintenance • Space-saving design \mathbf { \nabla } * \mathbf { \varepsilon } Quick and easy installation • Low-altitude discharge * * Visually smokeless

INSTALLATION SCHEMATIC

Note: Pipe diameter of the air outlet > 3 0 0 x 3 0 0 {mm } ; Wind speed of the main pipeline < 8 ~ { m / s } ; if the air duct { > } 5 meters, or elbows ^ { \ge 2 } pcs, or equipment ^ { \ge 2 } sets, you must add the rear-end induced draft fan.

FLOOR GULLY

Standard Features

Product highly customizable, meets the different needs of customers (material, thickness, size, shape size customization);
Made of all stainless steel, strong pressure resistance and not easy to deform;
Strong corrosion resistance to meet the needs of different uses;
All stainless steel materials are in line with international standards;
Equipment consists of a trench cover, a trench, a slag basket, and an odor-resistant cover；
The trench cover adopts a non-slip design, which can effectively prevent slipping and is safer to use (a variety of trench plates are available);
Stainless steel round filter design can effectively block foreign objects and prevent clogging；
The floor drain adopts an anti-odor design to avoid bad odor；
Suitable for the collection and discharge of wastewater from large inclined woks or soup pots Floor gully suitable for 1 5 0 \mathsf {mm } limited underfloor depth, includes strainer but no anti-odor seal.
Generally used on second floor or above.

Floor gully suitable for 3 1 0 ~ \mathsf {mm } limited underfloor depth, includes strainer and anti-odor seal.

Most widely used by clients.

STAINLESS STEEL PRODUCTS