ChainflexControlCable
●For heaviest duty applications ●PUR outer jacket ●Oil-resistant and coolant-resistant ●Shielded ●Notch-resistant OHydrolysisandmicrobe-resistant
■Cross Section
Jacket Inner jacket Filer- Conductor 00 00 Braiding ? C Insulation
■Specifications
| Certification | E145335:UL21296/UL21297 | ||||
| Number of cores | 4C | 6C | 8C | 12C | 18C . |
| Core design | |||||
| Conductor | Stranded conductor in especially bending-resistant version consisting of bare copper wires | ||||
| Insulation | Mechanically high-quality TPEmixture. | ||||
| Insulation clor | Colour code inaccordance with DIN47100 | ||||
| Core structure | Coreswound ina layerwithespecially short pitch length | ||||
| Cfrip | Tear strip for faster cable stripping | ||||
| Filer | Tensile stress-resistant centre element | ||||
| Inner jacket | PVC mixture adapted to suit the requirements in e-chains? | ||||
| Overall shield | Extremely bending-resistantbraiding madeoftinnedcopper wires.Coverage linearapprox.70%,opticalapprox.90% | ||||
| Jacket Jacket clor | Low-adhesion,halogen-free,highlyabrasionresistantPUR mixture,adapted tosuit therequirements ine-chains? | ||||
| Marking | Anthracite grey (similarto RAL7016) E145335AWMSTYLE20549XXAWG80C300V AWMIA/B80C300VFT2 DATAFIELD | ||||
| Marking clor | In the XXAWG,XX can be 24,or 26. | ||||
| Ambient temperature | White | ||||
| Rated voltage | -40°℃~+80°℃ | ||||
| 300V | |||||
| Dielectric strength | No cracking (AC 2000V/1Minute) | ||||
| Spark Test | 3.0 KV Insulation/Jacket | ||||
| Insulation resistance | ≥10MΩ | ||||
| Flame test | VW-1/FT1 | ||||
■Part Number
| Part No | Nominal cross-sectional area | Outer diameter(d) max | Copper index | Weight | Max.conductor resistanceat20℃ | Max.current ratingat30℃ |
| mm² | mm | kg/km | kg/km | Ω/km | A | |
| TRU.01.04 | 4x0.14 (26AWG) | 6.5 | 18 | 49 | 138 | 2.5 |
| TRU.01.08 | 8x0.14 (26AWG) | 7.5 | 31 | 66 | 138 | 2.5 |
| TRU.01.12 | 12x0.14 (26AWG) | 9.5 | 51 | 102 | 138 | 2.5 |
| TRU.01.18 | 18x0.14 (26AWG) | 10.5 | 56 | 135 | 138 | 2.5 |
| TRU.02.04 | 4x0.25 (24AWG) | 7.0 | 25 | 59 | 79 | 5 |
| TRU.02.08 | 8x0.25 (24AWG) | 8.0 | 43 | 84 | 79 | 5 |
| TRU.02.18 | 18x0.25 (24AWG) | 12.0 | 100 | 173 | 79 | 5 |
Chainflex Control Cable
●For heaviest duty applications PUR outer jacket OOil-resistant and coolant-resistant ●Shielded ●Notch-resistant ●Hydrolysis and microbe-resistant
TRU.XX.XX
■Dynamic information
| Bend radius | e-chain?linear | |
| Flexible Fixed | minimum4xOD minimum3xOD | |
| Temperature | e-chain? linear | -20°Cup to +80°C |
| Flexible | -40°C up to+80°C(following DIN EN 60811-504) | |
| Fixed | -50°C up to +80oC (following DIN EN 50305) | |
| V max | unsupported | 10 m/s |
| Gliding | 6m/s | |
Travel distance
Unsupported travels and up to 1 0 0 \mathsf { m } for gliding applications,Class5
■Guaranteed service life according to guarantee conditions
| Doublestrokes | 5million | 7.5million | 10million |
| Temperature,from/to[C] | R min.[x d] | R min.[x d] | R min.[x d] |
| -20~-10 | 6.8 | 7.5 | 8.5 |
| -10~+70 | 5 | 6.8 | 7.5 |
| +70~+80 | 6.8 | 7.5 | 8.5 |
Typical lab test setup for thiscable series
Testbend radius approx. 2 8 - 7 5mm Test travel S approx.1-15m Test duration minimum3-5 million double strokes Test speed approx. 0 . 5 - 2 \ : \mathsf { m } / S Testacceleration approx.0.5-1.5 m /s²
Application
●Suitable forsmall spaceapplications ● Suitable for short,very fast applications \bullet Excellent oil resistance ● Compatible for indoor and outdoor use
Chainflex Control Cable
●For heaviest duty applications ?PUR outer jacket ●Oil-resistant and coolant-resistant ●Shielded ●Notch-resistant ●Hydrolysisandmicrobe-resistant
TRU.XX.XX
■Propertiesand approvals
UV resistance
High
Oil resistance
Oil-resistant (following DIN EN 50363-10-2), Class 3
Silicone-free
Free from silicone which can affect paint adhesion (following PV3.10.7-status 1992)
Offshore
MUD-resistant following NEK606-status 2016
PTFE-free
Thedesign of these products does not contain PTFE
REACH In accordance with regulation (EC) No.1907/2006 (REACH)
Lead-free
Following 2011/65/EC (RoHS-ll)
CE
CE Following 2014/35/EU
Clean room
According to ISO-testedby IPA Class1according to DIN EN ISO 14644-1
■Colour code in accordance with DiN 47100
| Conductor no | Coloursaccording to DIN ISO 47100 | Conductorno | Coloursaccording to DIN ISO 47100 |
| 1 | White | 19 | White-pink |
| 2 | Brown | 20 | Pink-brown |
| 3 | Green | 21 | White-blue |
| 4 | Yellow | 22 | Brown-blue |
| 5 | Grey | 23 | White-red |
| 6 | Pink | 24 | Brown-red |
| 7 | Blue | 25 | White-black |
| 8 | Red | 26 | Brown-black |
| 9 | Black | 27 | Grey-green |
| 10 | Violet | 28 | Yellow-grey |
| 11 | Grey-pink | 29 | Pink-green |
| 12 | Red-blue | 30 | Yellow-pink |
| 13 | White-green | 31 | Green-blue |
| 14 | Brown-green | 32 | Yellow-blue |
| 15 | White-yellow | 33 | Green-red |
| 16 | Yellow-brown | 34 | Yellow-red |
| 17 | White-grey | 35 | Green-black |
| 18 | Grey-brown | 36 | Yellow-black |
ChainflexControlCable
●For heaviest duty applications ?TPE outer jacket ?Oil and bio-oil resistant OPVC-free ●Low-temperature-flexible●Hydrolysisand microbe-resistant
■Cross Section
Specifications
| Certification | E145335:UL21296/UL21297 | ||||
| Number of cores | 2C | 3C | 4C | 5C | 6C |
| Core design | 00 | 8 | |||
| Numberof cores | 7C | 8C | 12C | 16C | 18C |
| Core design | 88 | ||||
| Conductor | Stranded conductor in especially bending-resistant version consisting of bare copper wires | ||||
| Insulation | Mechanically high-quality TPEmixture. | ||||
| Insulation clor | Cores | ||||
| Cores≥0.75mm²:Black cores with white numbers,one green-yellow core | |||||
| Core structure | Coreswound ina layer with especially short pitch length | ||||
| Cfrip | Tear strip for faster cable stripping | ||||
| Filer | Tensilestress-resistant centreelement | ||||
| Jacket | Low-adhesion,extremelyabrasion-resistantandhighlyflexibleTPEmixture,adaptedtosuit therequirementsine-hains? | ||||
| Jacket clor | Slate grey (similar to RAL7015) | ||||
| Marking | E145335AWMSTYLE2129XXXAWG105CX00VAWMIA 105CX00VFT2DATAFIELD In the2129X,Xcanbe 6or7.;In the XXAWG,XXrefers to the wire number.;Inthe X00V,Xcanbe 3or6. | ||||
| Marking clor | White | ||||
| Ambient temperature | -40℃~+105℃ | ||||
| Rated voltage | Cores | ||||
| Dielectric strength | Nocracking (AC2000V/1Minute) | ||||
| Spark Test | 3.0KV Insulation/Jacket | ||||
| Insulation resistance | ≥10MΩ | ||||
| Flame test | HB/FT2 | ||||
Chainflex Control Cable
●For heaviest duty applications?TPE outer jacket Oil and bio-oil resistant PVC-free ●Low-temperature-flexible ●Hydrolysis and microbe-resistant
■Part Number
| artTannber PartNo | Mangcurent | |||||
| Nomin crscisna | Outer diameter(d) | inder | Weight | rMaxconductoc | ||
| mm² | mm | kg/km | kg/km | Ω/km | A | |
| TRE.UL.02.02 | 2x0.25 (24AWG) | 4.5 | 5 | 18 | 79.0 | 5 |
| TRE.UL.02.03 | 3x0.25 (24AWG) | 5.0 | 8 | 22 | 79.0 | 5 |
| TRE.UL.02.06 | 6x0.25 (24AWG) | 5.5 | 15 | 36 | 79.0 | 5 |
| TRE.UL.02.07 | 7x0.25 (24AWG) | 6.5 | 18 | 43 | 79.0 | 5 |
| TRE.UL.02.08 | 8x0.25 (24AWG) | 6.5 | 20 | 49 71 | 79.0 | 5 |
| TRE.UL.02.12 | 12x0.25 (24AWG) | 8.0 | 30 | 100 | 79.0 | 5 |
| TRE.UL.02.18 | 18x0.25 (24AWG) | 9.0 | 45 | 31 | 79.0 | 5 |
| TRE.UL.03.04 | 4x0.34 (22AWG) | 5.0 5.5 | 14 17 | 36 | 57.0 | 7 |
| TRE.UL.03.05 TRE.UL.03.06 | 5x0.34 (22AWG) 6x0.34 (22AWG) | 6.0 | 21 | 43 | 57.0 | 7 |
| TRE.UL.03.08 | 8x0.34 (22AWG) | 7.0 | 28 | 57 | 57.0 57.0 | 7 |
| TRE.UL.05.02 | 2x0.50 (20AWG) | 5.0 | 10 | 28 | 39.0 | 7 |
| TRE.UL.05.03 | 3x0.50 (20AWG) | 5.5 | 15 | 34 | 39.0 | 10 |
| TRE.UL.05.04 | 4x0.50 (20AWG) | 6.0 | 20 | 41 | 39.0 | 10 |
| TRE.UL.05.05 | 5x0.50 (20AWG) | 6.5 | 25 | 50 | 39.0 | 10 |
| TRE.UL.05.07 | 7x0.50 (20AWG) | 7.5 | 35 | 69 | 39.0 | 10 |
| TRE.UL.05.12 | 12x0.50 (20AWG) | 10.0 | 60 | 123 | 39.0 | 10 |
| TRE.UL.05.18 | 18x0.50 (20AWG) | 11.5 | 90 | 179 | 39.0 | 10 10 |
| TRE.UL.07.04 | 4G0.75 (19AWG) | 6.5 | 30 | 56 | 26.0 | 14 |
| TRE.UL.07.05 | 5G0.75 (19AWG) | 7.0 | 38 | 69 | 26.0 | 14 |
| TRE.UL.07.07 | 7G0.75 (19AWG) | 8.0 | 53 | 94 | 26.0 | 14 |
| TRE.UL.07.12 | 12G0.75 (19AWG) | 11.0 | 90 | 176 | 26.0 | 14 |
| TRE.UL.10.03 | 3G1.0 (18AWG) | 6.0 | 30 | 54 | 19.5 | 17 |
| TRE.UL.10.04 | 4G1.0 (18AWG) | 6.5 | 40 | 68 | 19.5 | 17 |
| TRE.UL.10.05 | 5G1.0 (18AWG) | 7.5 | 50 | 84 | 19.5 | 17 |
| TRE.UL.10.12 | 12G1.0 (18AWG) | 12.0 | 120 | 212 | 19.5 | 17 |
| TRE.UL.10.18 | 18G1.0 (18AWG) | 14.0 | 179 | 303 | 19.5 | 17 |
| TRE.UL.15.02 | 2x1.5 (16AWG) | 6.5 | 30 | 55 | 13.3 | 21 |
| TRE.UL.15.04 | 4G1.5 (16AWG) | 7.5 | 60 | 90 | 13.3 | 21 |
| TRE.UL.15.05 | 5G1.5 (16AWG) | 8.0 | 75 | 111 | 13.3 | 21 |
| TRE.UL.15.07 | 7G1.5 (16AWG) | 9.5 | 104 | 159 | 13.3 | 21 |
| TRE.UL.15.12 | 12G1.5 (16AWG) | 13.0 | 178 | 280 | 13.3 | 21 |
| TRE.UL.25.04 | 4G2.5 (14AWG) | 9.0 | 100 | 144 | 8.0 | 30 |
| TRE.UL.25.05 | 5G2.5 (14AWG) | 9.5 | 124 | 176 | 8.0 | 30 |
| TRE.UL.25.07 | 7G2.5 (14AWG) | 12.0 | 174 | 253 | 8.0 | 30 |
| TRE.UL.40.04 | 4G4.0 (12AWG) | 10.5 | 159 | 212 | 5.0 | 37 |
| TRE.UL.60.04 | 4G6.0 (10AWG) | 12.0 | 238 | 308 | 3.3 | 53 |
| TRE.UL.60.05 | 5G6.0 (10AWG) | 13.0 | 297 | 378 | 3.3 | 53 |
Chainflex Control Cable
●For heaviest duty applications?TPEouter jacket Oil and bio-oil resistant PVC-free ●Low-temperature-flexible ?Hydrolysisand microbe-resistant
TRE.UL.XX.XX
■Dynamicinformation
| Bend radius | e-chain?linear | |
| Flexible Fixed | minimum4xOD minimum3xOD | |
| Temperature | e-chain?linear | -35°℃upto+105C |
| Flexible | -50Cup to+105oC(following DIN EN 60811-504) | |
| Fixed | -55Cup to+105°C (following DIN EN 50305) | |
| V max | unsupported | 10 m/s |
| Gliding | 6m/s | |
Travel distance
Unsupported travels and up to 40om for gliding applications,Class 6
Torsion
± 9 0 ^ { \circ } ,with1m cable length,Class 2
■Guaranteedservice lifeaccording to guarantee conditions
| Doublestrokes | 5million | 7.5million | 10million |
| Temperature,from/to [C] | R min.[× d] | R min.[x d] | R min.[× d] |
| -35~-25 | 6.8 | 7.5 | 8.5 |
| -25~+80 | 5 | 6 | 7 |
| +80~+105 | 6.8 | 7.5 | 8.5 |
1Typical labtestsetupforthiscableseries
Testbend radius approx. 2 8 - 1 2 5 \ : {mm } Test travel S approx.1-15m Test duration minimum 3-5 million double strokes Test speed approx. 0 . 5 - 2 \ : \mathsf { m } / S Testacceleration approx.0.5-1.5m /s²
Application
●Suitable forsmall spaceapplications ●Suitable forshort,very fastapplications ● Excellent oil resistance ● Compatible for indoor and outdoor use
ChainflexControlCable
●For heaviest duty applications?TPEouter jacket Oil and bio-oil resistant PVC-free ●Low-temperature-flexible●Hydrolysisand microbe-resistant
TRE.UL.XX.XX
■ Properties and approvals
UVresistance
High
Oil resistance
Oil-resistant (following DIN EN 60811-404) (following VDMA 24568with Plantocut8 S-MB tested by DEA),Class4
Silicone-free
Free from silicone which can affect paint adhesion (following PV3.10.7-status 1992)
Halogen-free
Following DIN EN 60754
PTFE-free
Thedesign of these products does not contain PTFE
REACH Inaccordancewith regulation (EC) No.1907/2006 (REACH)
Lead-free
Following 2011/65/EC (RoHS-II)
CE
CE Following 2014/35/EU
clean room
Clean room
According to ISO-testedby IPA Class1according to DINENISO 14644-1
■Colour code inaccordancewith DiN47100
| Conductor no | Coloursaccording to DIN ISO 47100 | Conductorno | Coloursaccording to DIN ISO 47100 |
| 1 | White | 19 | White-pink |
| 2 | Brown | 20 | Pink-brown |
| 3 | Green | 21 | White-blue |
| 4 | Yellow | 22 | Brown-blue |
| 5 | Grey | 23 | White-red |
| 6 | Pink | 24 | Brown-red |
| 7 | Blue | 25 | White-black |
| 8 | Red | 26 | Brown-black |
| 9 | Black | 27 | Grey-green |
| 10 | Violet | 28 | Yellow-grey |
| 11 | Grey-pink | 29 | Pink-green |
| 12 | Red-blue | 30 | Yellow-pink |
| 13 | White-green | 31 | Green-blue |
| 14 | Brown-green | 32 | Yellow-blue |
| 15 | White-yellow | 33 | Green-red |
| 16 | Yellow-brown | 34 | Yellow-red |
| 17 | White-grey | 35 | Green-black |
| 18 | Grey-brown | 36 | Yellow-black |
Chainflex Control Cable
OFor heaviest duty applicationsand especially small radius down to 3x OD●TPE outer jacket Oiland bio-oilresistant●PVCand halogen-freeOLow-temperature-flexible•Hydrolysisand microbe-resistant
TRE.MAX
■Cross Section
Specifications
| Certification | E145335/UL21296 | ||||
| Number of cores | 2C | 3C | 4C | 6C | 8C |
| Core design | %8 | ||||
| Conductor | Conductor consisting of a highly flexible special alloy | ||||
| Insulation | Mechanically high-quality TPE mixture. | ||||
| Insulation clor | Colour code in accordance with DiN 47100 | ||||
| Core structure | Cores wound in a layer with especially short pitch length | ||||
| Filer | Tensile stress-resistant centre element | ||||
| Jacket | Low-adesion,extremelyabrasion-resistantandhighlyfexibleTPEmixture,adapted tosuit theequirementsin-cains@ | ||||
| Jacket clor | Steel-blue (similar to RAL 5011) AWM STYLE21296 XXAWG 105C 300V AWMIA105C300VFT2 DATAFIELD | ||||
| Marking | E145335 In the XXAWG,XX can be 20,22,24,or 26. | ||||
| Marking clor | White | ||||
| Ambient temperature | -40°℃~+105℃ | ||||
| Rated voltage | 300V | ||||
| Dielectric strength | No cracking (AC 2000V/1Minute) | ||||
| Spark Test | 3.0KV Insulation/Jacket | ||||
| Insulation resistance | ≥10MΩ | ||||
| Flame test | HB/FT2 | ||||
■Part Number
| PartNo | Nomina crossectional | Outrdiameter(d) | Coper | Weight | reMax.condu2oC | Minx.curont |
| mm² | mm | kg/km | kg/km | Ω/km | A | |
| TRE.MAX.01.02 | 2x0.14 (26AWG) | 4.5 | 4 | 18 | 140 | 2.5 |
| TRE.MAX.01.03 | 3x0.14 (26AWG) | 4.5 | 6 | 20 | 140 | 2.5 |
| TRE.MAX.01.04 | 4x0.14 (26AWG) | 5 | 7 | 25 | 140 | 2.5 |
| TRE.MAX.01.08 | 8x0.14 (26AWG) | 6.5 | 15 | 45 | 140 | 2.5 |
| TRE.MAX.02.03 | 2x0.25 (24AWG) | 5 | 10 | 29 | 88 | 5 |
| TRE.MAX.02.04 | 4x0.25 (24AWG) | 5.5 | 14 | 36 | 88 | 5 |
| TRE.MAX.02.08 | 8x0.25 (24AWG) | 7.5 | 29 | 68 | 88 | 5 |
| TRE.MAX.03.04 | 4x0.34 (22AWG) | 5 | 15 | 31 | 72 | 7 |
| TRE.MAX.03.08 | 8x0.34 (22AWG) | 7 | 29 | 56 | 72 | 7 |
| TRE.MAX.05.02 | 2x0.50 (20AWG) | 5 | 11 | 26 | 50 | 10 |
| TRE.MAX.05.04 | 4x0.50 (20AWG) | 5.5 | 21 | 39 | 50 | 10 |
Chainflex Control Cable
●For heaviest dutyapplicationsand especially small radius down to 3x OD?TPEouter jacket ●Oil and bio-oilresistant ●PVCand halogen-freeOLow-temperature-flexible•Hydrolysisand microbe-resistant
TRE.MAX
■Dynamicinformation
| Bend radius | e-chainR linear Flexible | minimum3xOD minimum3xOD |
| Fixed | minimum3xOD | |
| Temperature | e-chainRlinear | -35°℃upto+105C |
| Flexible | -50C up to+105C(following DIN EN 60811-504) | |
| Fixed | -55C up to +105oC (following DIN EN 50305) | |
| V max | unsupported | 10 m/s |
| Gliding | 6 m/s |
Travel distance
Short,very fastapplicationswith small radius and restricted installation space,Class 5
Torsion
± 9 0 ^ { \circ } ,with1m cable length,Class 2
■Guaranteedservice lifeaccording to guarantee conditions
| Doublestrokes | 5million | 40million | 100million |
| Temperature,from/to[C] | R min.[x d] | R min.[× d] | R min.[x d] |
| -35~-25 | 4 | 6 | 7 |
| -25~+80 | 3 | 5 | 6 |
| +80~+105 | 4 | 6 | 7 |
1Typical labtestsetupforthiscableseries
Testbend radius approx. 1 5 - 2 8 \ : {mm } (20 Test travel S approx.1-15m Test duration minimum 3-5 million double strokes Test speed approx. 0 . 5 - 2 \ : \mathsf { m } / S Testacceleration approx.0.5-1.5m /s²
Application
●Suitable forsmall spaceapplications \bullet Suitable forshort,very fastapplications ● Excellent oil resistance ● Compatible for indoor and outdoor use
Chainflex Control Cable
●For heaviest dutyapplicationsand especially small radius down to 3x OD?TPEouter jacket ●Oil and bio-oil resistantOPVCand halogen-freeOLow-temperature-flexible•Hydrolysisand microbe-resistant
TRE.MAX
■Propertiesand approvals
UV resistance
High
Oil resistance
Oil-resistant (following DIN EN 60811-404) (following VDMA 24568with Plantocut8 S-MB tested by DEA),Class4
Silicone-free
Free from silicone which can affect paint adhesion (following PV3.10.7-status 1992)
Halogen-free
Following DIN EN 60754
PTFE-free
Thedesign of these products does not contain PTFE
REACH In accordance with regulation (EC) No.1907/2006 (REACH)
Lead-free
Following 2011/65/EC (RoHS-ll)
CE
CE Following 2014/35/EU
clean room
Clean room
According to ISO- testedby IPA Class 1according to DIN EN ISO 14644-1
■Colour code in accordance with DiN 47100
| Conductorno | Coloursaccording to DIN ISO 47100 | Conductor no | Coloursaccording to DIN ISO 47100 |
| 1 | White | 19 | White-pink |
| 2 | Brown | 20 | Pink-brown |
| 3 | Green | 21 | White-blue |
| 4 | Yellow | 22 | Brown-blue |
| 5 | Grey | 23 | White-red |
| 6 | Pink | 24 | Brown-red |
| 7 | Blue | 25 | White-black |
| 8 | Red | 26 | Brown-black |
| 9 | Black | 27 | Grey-green |
| 10 | Violet | 28 | Yellow-grey |
| 11 | Grey-pink | 29 | Pink-green |
| 12 | Red-blue | 30 | Yellow-pink |
| 13 | White-green | 31 | Green-blue |
| 14 | Brown-green | 32 | Yellow-blue |
| 15 | White-yellow | 33 | Green-red |
| 16 | Yellow-brown | 34 | Yellow-red |
| 17 | White-grey | 35 | Green-black |
| 18 | Grey-brown | 36 | Yellow-black |
ChainflexControlCable
●For heaviest duty applications ●TPE outer jacket Oil and bio-oil resistant ●PVC-free ●Low-temperature-flexible?Hydrolysisand microbe-resistant
TRE.XX.XX
■Cross Section
Specifications
| Certification | E145335:UL21296/UL21297 | ||||
| Numberof cores | 2C | 3C | 4C | 5C | 6C |
| Core design | 00 | 8 | |||
| Numberof cores | 7C | 8C | 12C | 16C | 18C |
| Core design | 88 | ||||
| Conductor | |||||
| Insulation | Stranded conductorin especially bending-resistant version consisting of bare copper wires Mechanically high-quality TPE mixture. | ||||
| Insulation clor | Cores | ||||
| Cores≥0.75mm²:Black cores with white numbers,one green-yellow core | |||||
| Core structure | Coreswound ina layerwith especially short pitch length | ||||
| Cfrip | Tear strip for faster cable stripping | ||||
| Filer | Tensile stress-resistant centre element | ||||
| Jacket | Low-adhesionextremelyabrasionresstantandhighlyfexibleTPEmixtureadaptedtosuit terequirementsinais? | ||||
| Jacket clor | Steel-blue (similar to RAL 5011) | ||||
| Marking | E145335AWMSTYLE2129XXXAWG105CX00VAWMIA105CX00VFT2 DATAFIELD In the2129X,Xcanbe 6or7.;In the XXAWG,XXrefers to the wire number.;Inthe X00V,Xcanbe 3or6. | ||||
| Marking clor | White | ||||
| Ambient temperature | -40℃~+105℃ | ||||
| Rated voltage | Cores | ||||
| Dielectric strength | No cracking (AC2000V/1Minute) | ||||
| Spark Test | 3.0KV Insulation/Jacket | ||||
| Insulationresistance | ≥10MΩ | ||||
| Flame test | HB/FT2 | ||||
Chainflex Control Cable
●For heaviest duty applicationsOTPE outer jacket ●Oil and bio-oil resistant ●PVC-free ●Low-temperature-flexible●Hydrolysisandmicrobe-resistant
■Part Number
| artannoer PartNo | Max.conducorc | |||||
| Nomin crscisna | Oouerdiameter(d) | inder | Weight | Mangcurent | ||
| mm² | mm | kg/km 5 | kg/km 18 | Ω/km 79.0 | A | |
| TRE.02.02 | 2x0.25 (24AWG) | 4.5 | 5 | |||
| TRE.02.03 | 3x0.25 (24AWG) | 5.0 | 8 | 22 | 79.0 | 5 |
| TRE.02.06 | 6x0.25 (24AWG) | 5.5 | 15 | 36 | 79.0 | 5 |
| TRE.02.07 | 7x0.25 (24AWG) | 6.5 | 18 | 43 | 79.0 | 5 |
| TRE.02.08 | 8x0.25 (24AWG) | 6.5 | 20 30 | 49 71 | 79.0 | 5 |
| TRE.02.12 | 12x0.25 (24AWG) | 8.0 | 100 | 79.0 | 5 | |
| TRE.02.18 | 18x0.25 (24AWG) | 9.0 | 45 | 31 | 79.0 | 5 |
| TRE.03.04 TRE.03.05 | 4x0.34 (22AWG) | 5.0 5.5 | 14 17 | 36 | 57.0 | 7 |
| TRE.03.06 | 5x0.34 (22AWG) | 6.0 | 21 | 43 | 57.0 | 7 |
| TRE.03.08 | 6x0.34 (22AWG) 8x0.34 (22AWG) | 7.0 | 28 | 57 | 57.0 57.0 | 7 |
| TRE.05.02 | 2x0.50 (20AWG) | 5.0 | 10 | 28 | 39.0 | 7 |
| TRE.05.03 | 3x0.50 (20AWG) | 5.5 | 15 | 34 | 39.0 | 10 |
| TRE.05.04 | 4x0.50 (20AWG) | 6.0 | 20 | 41 | 39.0 | 10 |
| TRE.05.05 | 5x0.50 (20AWG) | 6.5 | 25 | 50 | 39.0 | 10 |
| TRE.05.07 | 7x0.50 (20AWG) | 7.5 | 35 | 69 | 39.0 | 10 10 |
| TRE.05.12 | 12x0.50 (20AWG) | 10.0 | 60 | 123 | 39.0 | 10 |
| TRE.05.18 | 18x0.50 (20AWG) | 11.5 | 90 | 179 | 39.0 | 10 |
| TRE.07.04 | 4G0.75 (19AWG) | 6.5 | 30 | 56 | 26.0 | 14 |
| TRE.07.05 | 5G0.75 (19AWG) | 7.0 | 38 | 69 | 26.0 | 14 |
| TRE.07.07 | 7G0.75 (19AWG) | 8.0 | 53 | 94 | 26.0 | 14 |
| TRE.07.12 | 12G0.75 (19AWG) | 11.0 | 90 | 176 | 26.0 | 14 |
| TRE.10.03 | 3G1.0 (18AWG) | 6.0 | 30 | 54 | 19.5 | 17 |
| TRE.10.04 | 4G1.0 (18AWG) | 6.5 | 40 | 68 | 19.5 | 17 |
| TRE.10.05 | 5G1.0 (18AWG) | 7.5 | 50 | 84 | 19.5 | 17 |
| TRE.10.12 | 12G1.0 (18AWG) | 12.0 | 120 | 212 | 19.5 | 17 |
| TRE.10.18 | 18G1.0 (18AWG) | 14.0 | 179 | 303 | 19.5 | 17 |
| TRE.15.02 | 2x1.5 (16AWG) | 6.5 | 30 | 55 | 13.3 | 21 |
| TRE.15.04 | 4G1.5 (16AWG) | 7.5 | 60 | 90 | 13.3 | 21 |
| TRE.15.05 | 5G1.5 (16AWG) | 8.0 | 75 | 111 | 13.3 | 21 |
| TRE.15.07 | 7G1.5 (16AWG) | 9.5 | 104 | 159 | 13.3 | 21 |
| TRE.15.12 | 12G1.5 (16AWG) | 13.0 | 178 | 280 | 13.3 | 21 |
| TRE.25.04 | 4G2.5 (14AWG) | 9.0 | 100 | 144 | 8.0 | 30 |
| TRE.25.05 | 5G2.5 (14AWG) | 9.5 | 124 | 176 | 8.0 | 30 |
| TRE.25.07 | 7G2.5 (14AWG) | 12.0 | 174 | 253 | 8.0 | 30 |
| TRE.40.04 | 4G4.0 (12AWG) | 10.5 | 159 | 212 | 5.0 | 37 |
| TRE.60.04 | 4G6.0 (10AWG) | 12.0 | 238 | 308 | 3.3 | 53 |
| TRE.60.05 | 5G6.0 (10AWG) | 13.0 | 297 | 378 | 3.3 | 53 |
Chainflex Control Cable
●For heaviest duty applications?TPEouter jacket Oil and bio-oil resistant PVC-free ●Low-temperature-flexible ?Hydrolysisand microbe-resistant
TRE.XX.XX
■Dynamicinformation
| Bend radius | e-chain?linear | minimum5xOD minimum4xOD |
| Flexible Fixed | minimum3xOD | |
| Temperature | -35Cupto+105C | |
| e-chain? linear Flexible | -50Cup to+105C(following DIN EN 60811-504) | |
| Fixed | -55C up to +105°C (following DIN EN 50305) | |
| V max | unsupported | 10 m/s |
| Gliding | 6m/s |
Travel distance
Unsupported travels and up to 40om for gliding applications,Class 6
Torsion
± 9 0 ^ { \circ } ,with1m cable length,Class 2
■Guaranteedservice lifeaccording to guarantee conditions
| Doublestrokes | 5million | 7.5million | 12.5million |
| Temperature,from/to [C] | R min.[× d] | R min.[× d] | R min.[x d] |
| -35~-25 | 6.8 | 7.5 | 8.5 |
| -25~+80 | 5 | 6 | 7 |
| +80~+105 | 6.8 | 7.5 | 8.5 |
1Typical labtestsetupforthiscableseries
Testbend radius approx. 1 8 - 1 2 5 \ : {mm } Test travel S approx.1-15m Test duration minimum 3-5 million double strokes Test speed approx. 0 . 5 - 2 \ : \mathsf { m } / S Testacceleration approx.0.5-1.5m/s²
Application
●Suitable forsmall spaceapplications ●Suitable forshort,very fastapplications ● Excellent oil resistance ● Compatible for indoor and outdoor use
Chainflex Control Cable
●For heaviest duty applications?TPEouter jacket Oil and bio-oil resistant PVC-free ●Low-temperature-flexible●Hydrolysisand microbe-resistant
TRE.XX.XX
■Properties and approvals
UV resistance
High
Oil resistance
Oil-resistant (following DIN EN 60811-404) (following VDMA 24568with Plantocut8 S-MB tested by DEA),Class4
Silicone-free
Free from silicone which can affect paint adhesion (following PV3.10.7-status 1992)
Halogen-free
Following DIN EN 60754
PTFE-free
Thedesign of these products does not contain PTFE
REACH
In accordance with regulation (EC) No.1907/2006 (REACH)
Lead-free
Following 2011/65/EC (RoHS-ll)
CE
CE Following 2014/35/EU
clean room
Clean room
According to ISO-testedby IPA Class1according to DIN EN ISO 14644-1
■Colour code in accordance with DiN 47100
| Conductor no | Coloursaccording to DIN ISO47100 | Conductorno | Coloursaccording to DIN ISO 47100 |
| 1 | White | 19 | White-pink |
| 2 | Brown | 20 | Pink-brown |
| 3 | Green | 21 | White-blue |
| 4 | Yellow | 22 | Brown-blue |
| 5 | Grey | 23 | White-red |
| 6 | Pink | 24 | Brown-red |
| 7 | Blue | 25 | White-black |
| 8 | Red | 26 | Brown-black |
| 9 | Black | 27 | Grey-green |
| 10 | Violet | 28 | Yellow-grey |
| 11 | Grey-pink | 29 | Pink-green |
| 12 | Red-blue | 30 | Yellow-pink |
| 13 | White-green | 31 | Green-blue |
| 14 | Brown-green | 32 | Yellow-blue |
| 15 | White-yellow | 33 | Green-red |
| 16 | Yellow-brown | 34 | Yellow-red |
| 17 | White-grey | 35 | Green-black |
| 18 | Grey-brown | 36 | Yellow-black |
M8,Female,A-cod.
Specifications
| Familyconstructionform | M8 | |
| No. of poles | 3P | 4P |
| Pin layout(Female) | 。 | 0 |
| Coding | A | |
| Gender | Female | |
| Threaded hole | M8×1 | |
| Material | PUR | |
| Material contact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■Conformity
| Product standard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
| 3P | XXXXXXXX |
| 4P | XXXXXXXX |
M8,Male,A-cod.
Specifications
| Familyconstructionform | M8 | |
| No. of poles | 3P | 4P |
| Pin layout(Female) | O O | |
| Coding | A | |
| Gender | Male | |
| Threaded hole | M8×1 | |
| Material | PUR | |
| Material contact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data | Supply
| Operating voltage AC max. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■DeviceProtection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating offitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
■EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105℃ |
■ Conformity
| Productstandard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
| 3P | XxXXXXXX |
| 4P | XXXXXXXX |
M8,Female,B-cod.,5-pole
CE ? Us EK LISTED
Specifications
| Familyconstructionform | M8 |
| No. of poles | 5P |
| Pin layout(Female) | 00 |
| Coding | B |
| Gender | Female |
| Threaded hole | M8×1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data |Supply
| Operating voltage AC max. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 一 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■Conformity
| Product standard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
| 5P | XXXXXXXX |
M8,Male,B-cod.,5-pole
CE UL UUs E LISTED
Specifications
| Familyconstructionform | M8 |
| No. of poles | 5P |
| Pin layout(Female) | o |
| Coding | B |
| Gender | Male |
| Threaded hole | M8×1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data | Supply
| Operating voltage AC max. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating offitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105℃ |
■Conformity
| Productstandard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
M8,Female,D-cod.,4-pole
CE UL Us EK LISTED
Specifications
| Familyconstructionform | M8 |
| No. of poles | 4P |
| Pin layout(Female) | . 。 |
| Coding | D |
| Gender | Female |
| Threaded hole | M8×1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data |Supply
| Operating voltage AC max. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■ Conformity
| Product standard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
M8,Male,D-cod.,4-pole
CE UL UUs E LISTED
Specifications
| Familyconstructionform | M8 |
| No. of poles | 4P |
| Pin layout(Female) | C |
| Coding | D |
| Gender | Male |
| Threaded hole | M8×1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data | Supply
| OperatingvoltageACmax. | 50V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105℃ |
■Conformity
| Productstandard | EN IEC 61076-2-104 (M8) |
| Certification | UL CYJV.E551969 |
PartNumber
Connector
M12,Female,A-cod.
Specifications
| Familyconstructionform | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | C | |
| Coding | A | |
| Gender | Female | |
| Threaded hole | M12× 1 | |
| Material | PUR | |
| Materialcontact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Curret perating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Rated surge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40℃ |
| Operating temperature max. | 105°C |
■Conformity
| Productstandard | ENIEC61076-2-101(M12) |
| Certification | UL CYJV.E551969 |
PartNumber
| 4P | TPL000-0002-50007 |
| 5P | TPL000-0002-50017 |
M12,Male,A-cod.
Specifications
| Family construction form | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | ||
| Coding | A | |
| Gender | Male | |
| Threaded hole | M12 x 1 | |
| Material | PUR | |
| Material contact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data | Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Curret perating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Rated surge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating of fiting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
■EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°C |
| Operating temperature max. | 105°℃ |
■Conformity
| Productstandard | EN IEC61076-2-101(M12) |
| Certification | UL CYJV.E551969 |
PartNumber
| 4P | TPL000-0002-50006 |
| 5P | TPL000-0002-50016 |
M12,Female,A-cod.,8-pole
CE UL US E LISTED
Specifications
| Family construction form | M12 |
| No. of poles | 8P |
| Pin layout(Female) | |
| Coding | A |
| Gender | Female |
| Threaded hole | M12 ×1 |
| Material | PUR |
| Material contact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data |Supply
| Operating voltage AC max. | 30V |
| Operating voltage DC max. | 30V |
| Curret perating per | 2A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Rated surge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40℃ |
| Operating temperature max. | 105°℃C |
■Conformity
| Productstandard | EN IEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
M12,Male,A-cod.,8-pole
CE UL UUs EK LISTED
Specifications
| Familyconstructionform | M12 |
| No. of poles | 8P |
| Pin layout(Female) | |
| Coding | A |
| Gender | Male |
| Threaded hole | M12 x 1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data | Supply
| OperatingvoltageACmax. | 30V |
| Operating voltage DC max. | 30V |
| Current operating per | 2A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 一 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating offitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105℃ |
■Conformity
| Productstandard | EN IEC61076-2-101(M12) |
| Certification | UL CYJV.E551969 |
PartNumber
| 8P | TPL000-0002-50008 |
M12,Female,A-cod.,12-pole
CE ? Us EK LISTED
Specifications
| Familyconstructionform | M12 |
| No. of poles | 12P |
| Pin layout(Female) | |
| Coding | A |
| Gender | Female |
| Threaded hole | M12 × 1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data |Supply
| Operating voltage AC max. | 30V |
| Operating voltage DC max. | 30V |
| Current operating per | 1.5A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 一 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■ Conformity
| Productstandard | EN IEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
| 12P | TPL000-0002-50011 |
M12,Male,A-cod.,12-pole
CE UL UUs EK LISTED
Specifications
| Familyconstructionform | M12 |
| No. of poles | 12P |
| Pin layout(Female) | |
| Coding | A |
| Gender | Male |
| Threaded hole | M12× 1 |
| Material | PUR |
| Materialcontact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
■Electrical Data | Supply
| OperatingvoltageACmax. | 30V |
| Operating voltage DC max. | 30V |
| Current operating per | 1.5A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 2.5Kv |
| Material group (IEC 60664-1) | 一 |
■MechanicalData|MaterialData
| Screwconnection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
EnvironmentalCharacteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105℃ |
■Conformity
| Productstandard | ENIEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
| 12P | TPL000-0002-50010 |
Connector
M12,Female,B-cod.
Specifications
| Familyconstructionform | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | 品 | |
| Coding | B | |
| Gender | Female | |
| Threaded hole | M12 × 1 | |
| Material | PUR | |
| Materialcontact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Rated surge voltage | 1,5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40℃ |
| Operating temperature max. | 105°℃ |
■ Conformity
| Productstandard | EN IEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
| 4P | XXXXXXXX |
| 5P | XXXXXXXX |
M12,Male,B-cod.
Specifications
| Familyconstructionform | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | 。 | 。 。 |
| Coding | B | |
| Gender | Male | |
| Threaded hole | M12 × 1 | |
| Material | PUR | |
| Materialcontact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■ Conformity
| Productstandard | ENIEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
| 4P | XXXXXXXX |
| 5P | XXXXXXXX |
Connector
M12,Female,D-cod.
Specifications
| Family construction form | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | ||
| Coding | D | |
| Gender | Female | |
| Threaded hole | M12 ×1 | |
| Material | PUR | |
| Material contact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Curret perating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Rated surge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40℃ |
| Operating temperature max. | 105°℃ |
■Conformity
| Productstandard | ENIEC61076-2-101(M12) |
| Certification | ULCYJV.E551969 |
PartNumber
| 4P | TPL000-0002-50003 |
| 5P | XXXXXXXX |
M12,Male,D-cod.
Specifications
| Familyconstructionform | M12 | |
| No. of poles | 4P | 5P |
| Pin layout(Female) | 。 | 。 |
| Coding | D | |
| Gender | Male | |
| Threaded hole | M12 × 1 | |
| Material | PUR | |
| Materialcontact | Brass | |
| Coating contact | Gold plated | |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 | |
■Electrical Data |Supply
| Operating voltage AC max. | 60V |
| Operating voltage DC max. | 60V |
| Current operating per | 4A |
■Device Protection|Electrical
| Pollution Degree | 3 |
| Ratedsurge voltage | 1,5 Kv |
| Material group (IEC 60664-1) | 1 |
■MechanicalData|MaterialData
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Lockingmaterial | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
■Environmental Characteristics|Climatic
| Operating temperature min. | -40°℃ |
| Operating temperature max. | 105°C |
■ Conformity
| Productstandard | EN IEC 61076-2-101 (M12) |
| Certification | UL CYJV.E551969 |
PartNumber
| 4P | TPL000-2002-05152 |
| 5P | XXXXXXXX |
Female cordset
M8Female 0 ^ { \circ } A-cod.with cable
Specifications
| Family construction form | M8 |
| No. of poles | 4 |
| Coding | A |
| Gender | Female |
| Threaded hole | M8 x 1 |
| Material | PUR |
| Material contact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
| Cable length | 5M(The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electrical data |Supply | |
| Operating voltage AC max | 50V |
| Operating voltage DC max. | 60V |
| Current operating per contact max. | 4A |
| Device protection |Electrical | |
| Pollution Degree | 3 |
| Rated surge voltage | 1.5 kV |
| Material group (IEC 60664-1) | 1 |
| Mechanicaldata|Materialdata | |
| Screw connection | Zinc die-casting |
| Coating of fiting | Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -25°℃ |
| Operating temperature max. | 85°℃ |
| Conformity | |
| Product standard | |
| EN IEC 61076-2-104 (M8) | |
Female cordset
| Installation|Cable | |
| UL AWM Style | UL20549 |
| Stranding | 1 × 4 wires stranded |
| Wire arrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Conductor crosssection (wire) | 0.25 mm²(32× 0.1 mm) |
| Material conductorwire | Stranded copper wire,bare |
| Ingredient freeness wire insulation | lead-free,cadmium-free,CFC-free, halogen-free,silicone-free |
| Material jacket | PUR |
| Outer-diameter (jacket) | 4.5 mm ±5 % |
| Jacket Color | Black |
| Freedom from ingredients (jacket) | lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | abrasion-resistant,lowadhesion, good machinability,matte |
| Conductor resistance (wire) | 79 Ω/km @ 20°C |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacitymax. (wire) | 3.6A |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Operating temperature (static) | -40°℃C ..80C/90℃ @10000h Operation |
| Operating temperature (dynamic) | -25C ..80℃/90℃ @10000 h Operation |
| Operating temperature (drag chain) | -25℃C ..80C/90℃ @10000h Operation |
| Flame resistance | UL1581S1090,CSAFT2,IEC 60332-2-2 |
| Oil resistance | IEC 60811-404 |
| Chemical resistance | good |
| Other resistances | good resistance to gasoline,resistant to hydrolysis,resistant to microbes |
| Bending radius (fixed) | 5× Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.ofbending cycles (C-track) | 10 Mio.@25C |
| Traversing distance (C-track) | 10 m @ 25C|horizontal |
| Travel speed (C-track) | 3m/s @25°℃ |
| Acceleration (C-track) | 10 m/s² @25℃ |
| No. of torsion cycles | 2 Mio. |
| Torsion stress | ±180m |
| Torsion speed | 35 cycles/min |
| Part Number | |
Male cordset
M8Male 0 ^ { \circ } A-cod.with cable
Specifications
| Family construction form | M8 |
| No. of poles | 4 |
| A | |
| Coding | |
| Gender | Male |
| Threaded hole | M8 x 1 |
| Material | PUR |
| Material contact | Brass |
| Coating contact | Gold plated |
| Degreeof protection (EN IEC60529) Cable length | IP65,IP66K,IP67 |
| Cable length tolerance | 5M(The length can be customized according to customer requirements) 0M |
| Electrical data |Supply | 1M |
| Operating voltage AC max | 50V |
| Operating voltage DC max. | 60V |
| Current operating per contact max. | 4A |
| Deviceprotection|Electrical | |
| Pollution Degree | 3 |
| Rated surge voltage | 1.5 kV |
| Material group (IEC 60664-1) | 1 |
| Mechanicaldata|Materialdata | |
| Screwconnection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -25℃C |
| Operating temperature max. | 85℃ |
| Conformity | |
| Product standard EN IEC 61076-2-104 (M8) | |
Female cordset
| Installation|Cable | |
| UL AWM Style | UL20549 |
| Stranding | 1 × 4 wires stranded |
| Wire arrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Conductor crosssection (wire) | 0.25 mm²(32× 0.1 mm) |
| Material conductorwire | Stranded copper wire,bare |
| Ingredient freeness wire insulation | lead-free,cadmium-free,CFC-free, halogen-free,silicone-free |
| Material jacket | PUR |
| Outer-diameter (jacket) | 4.5 mm ±5 % |
| Jacket Color | Black |
| Freedom from ingredients (jacket) | lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | abrasion-resistant,lowadhesion, good machinability,matte |
| Conductor resistance (wire) | 79/km @20C |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacitymax. (wire) | 3.6A |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Operating temperature (static) | -40°℃C ..80C/90℃ @10000h Operation |
| Operating temperature (dynamic) | 25°℃...80C/90℃ @10000 h Operation |
| Operating temperature (drag chain) | -25℃C ..80C/90℃ @10000h Operation |
| Flame resistance | UL1581S1090,CSAFT2,IEC 60332-2-2 |
| Oil resistance | IEC 60811-404 |
| Chemical resistance | good |
| Other resistances | good resistance to gasoline,resistant to hydrolysis,resistant to microbes |
| Bending radius (fixed) | 5× Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.ofbending cycles (C-track) | 10 Mio.@25C |
| Traversing distance (C-track) | 10 m @ 25C|horizontal |
| Travel speed (C-track) | 3m/s @25°℃ |
| Acceleration (C-track) | 10 m/s² @25℃ |
| No. of torsion cycles | 2 Mio. |
| Torsion stress | ±180m |
| Torsion speed | 35 cycles/min |
| Part Number | |
Female cordset
M12Female 0 ^ { \circ } A-cod.with cable
Specifications
| Specncations | |
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | A |
| Gender | Female |
| Threaded hole | M12x1 |
| Material | PUR |
| Material contact | Brass |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
| Cable length | 5M (The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electricaldata |Supply | |
| Operating voltage AC max | 250V |
| Operating voltage DC max. | 250V |
| Current operating per contact max. | 4A |
| Device protection |Electrical | |
| Pollution Degree | |
| Rated surge voltage | 3 2.5kV |
| Material group (IEC60664-1) | |
| Mechanicaldata|Materialdata | |
| Screw connection | |
| Coating of fitting | Zinc die-casting Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -30℃ |
| Operating temperature max. | 85℃ |
| Conformity | |
| EN IEC 61076-2-101 (M12) | |
| Product standard | |
Female cordset
| Installation |Cable | |
| UL AWM Style | UL20549 |
| Stranding | 1 × 4 wires stranded |
| Wire arrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Conductor crosssection (wire) | 0.34 mm²(42 × 0.1 mm) |
| Material conductor wire | Stranded copper wire,bare |
| Ingredient freeness wire insulation | lead-free,cadmium-free, CFC-free,halogen-free,silicone-free |
| Material jacket | PUR |
| Outer-diameter (jacket) | 4.5 mm ±5 % |
| Jacket Color | Black |
| Freedom from ingredients (jacket) | lead-free,cadmium-free,CFC-free, halogen-free,silicone-free |
| Material property (jacket) | abrasion-resistant, low adhesion, good machinability, matte |
| Conductor resistance (wire) | 57Ω/km@20℃ |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacity max. (wire) | 4.8A |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Operating temperature (static) | -40 ℃C...80°℃C /90°C @ 10000 h Operation |
| Operating temperature (dynamic) | -25℃C..80℃/90℃@10000h Operation |
| Operating temperature (drag chain) | 25C ...80C/90℃ @10000 h Operation |
| Flame resistance | UL 1581S 1090,CSA FT2,IEC 60332-2-2 |
| Oil resistance | IEC 60811-404 |
| Chemical resistance | good |
| Other resistances | good resistance to gasoline,resistant to hydrolysis,resistant to microbes |
| Bending radius (fixed) | 5 × Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio.@25C |
| Traversing distance (C-track) | 10 m @25C|horizontal |
| Travel speed (C-track) | 3m/s @25°℃ |
| Acceleration (C-track) | 10 m/s²@25℃ |
| No. of torsion cycles | 5Mio. |
| Torsion stress | ±360m |
| Torsion speed | 35 cycles/min |
| Part Number | |
| 4P | |
Male cordset
M12Male 0 ^ { \circ } A-cod.with cable
Specifications
| Family construction form | M12 |
| No. of poles | 4 |
| A | |
| Coding | |
| Gender | Male |
| Threaded hole | M12 x 1 |
| Material | PUR |
| Material contact Coating contact | Brass |
| Degree of protection (EN IEC 60529) | Gold plated IP65,IP66K,IP67 |
| Cable length | 5M(The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electrical data | Supply | 1M |
| Operating voltage AC max | 250V |
| Operating voltage DC max. | 250V |
| Current operating per contact max. | 4A |
| Device protection|Electrical | |
| Pollution Degree | 3 |
| Rated surge voltage | 2.5 kV |
| Material group (IEC 60664-1) | 1 |
| Mechanicaldata|Materialdata | |
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -30C |
| Operating temperature max. | 85°℃ |
| Conformity | |
| Product standard EN IEC 61076-2-101 (M12) | |
Female cordset
| Installation |Cable | |
| UL AWM Style | UL20549 |
| Stranding | 1 × 4 wires stranded |
| Wire arrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Conductor crosssection (wire) | 0.34 mm²(42 × 0.1 mm) |
| Material conductorwire | Stranded copper wire,bare |
| Ingredient freeness wire insulation | lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material jacket | PUR |
| Outer-diameter (jacket) | 4.5mm ±5 % |
| Jacket Color | Black |
| Freedom from ingredients (jacket) | lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | abrasion-resistant, lowadhesion, good machinability,matte |
| Conductor resistance (wire) | 57Ω/km@20C |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacity max. (wire) | 4.8A |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Operating temperature (static) | -40 °C... 80℃/90 °℃C @ 10000 h Operation |
| Operating temperature (dynamic) | -25°C ...80℃/90℃@10000 h Operation |
| Operating temperature (drag chain) | -25℃C..80℃/90℃@10000h Operation |
| Flame resistance | UL 1581S 1090,CSA FT2,IEC 60332-2-2 |
| Oil resistance | IEC 60811-404 |
| Chemical resistance | good |
| Other resistances | good resistance to gasoline,resistant to hydrolysis,resistant to microbes |
| Bending radius (fixed) | 5 × Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio.@25C |
| Traversing distance (C-track) | 10 m @ 25C|horizontal |
| Travel speed (C-track) | 3m/s @25°℃ |
| Acceleration (C-track) | 10 m/s²@25℃ |
| No. of torsion cycles | 5Mio. |
| Torsion stress | ±360m |
| Torsion speed | 35 cycles/min |
| Part Number | XXXXXXXX |
| 4P | |
Male cordset
M8Male 9 0 ^ { \circ } A-cod.with cable
| Specifications | |
| Family construction form | M8 |
| No. of poles | 3 |
| Coding | A |
| Gender | Male |
| Threaded hole | M8x 1 |
| Material | PUR |
| Material contact | Copperalloy |
| Coating contact | Nickel plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
| Cable length | 5M(The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electrical data | Supply | |
| Operating voltage AC max | 50V |
| Operating voltage DC max. | 60V |
| Current operating per contact max. | 4A |
| Deviceprotection|Electrical | |
| Pollution degree | 3 |
| Rated surge voltage | 1.5kV |
| Material group (IEC 60664-1) | |
| Mechanical data |Material data Screw connection | |
| Coating of fitting | Brass Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | N/A |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -25C |
| Operating temperature max. | 85°℃ |
| Conformity | |
| Product standard | |
Male cordset
| Installation|Cable | |
| UL AWM Style | 20549/10493 |
| Stranding | 1 x 3 Wires stranded |
| Filler | N/A |
| Wire arrangement | Brown,black, blue |
| Material wire insulation | PP |
| Amount wires | 3 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Shore hardness wire insulation | 70 ±5 Shore D |
| Conductor crossection (wire) | 0.25 mm² (32x0.1mm) |
| Material conductor wire | Stranded copperwire,bare |
| Amount strands (wire) | 32 |
| Diameter of single wires | 0.1mm |
| Material properties wire insulation | Good machinability |
| Ingredient freeness wire insulation | Lead-free,cadmium-free, CFC-free, halogen-free,silicone-free |
| Conductor type (wire) | Strand class 6 |
| Outer-diameter (jacket) | 4.1mm ±5% |
| Material jacket | PUR |
| Shore hardness jacket | 90 ±5 Shore A |
| Jacket color | Black /RAL 9005 |
| Freedom from ingredients (jacket) | Lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | Abrasion-resistant,lowadhesion, good machinability, matte |
| Conductor resistance (wire) | 79Ω/km@20℃ |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Current load capacity max. (wire) | |
| Operating temperature (static) | 4.5A -40C...80°C/90°C@10000hOperation |
| Operating temperature (dynamic) | -25°C...80°C/90oC@10000hOperation |
| Operating temperature (drag chain) | |
| Flame resistance | -25℃ ...80℃/90℃ @10000 h Operation |
| Oil resistance | UL 1581 S 1090,CSA FT2,IEC 60332-2-2 |
| Chemical resistance | IEC 60811-404 |
| Other resistances | Good Good resistance to gasoline,resistant to hydrolysis,resistant to microbes |
| Bending radius (fixed) | 5× Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio. @25°℃ |
| Traversing distance (C-track) | 10 m@25°C |horizontal |
| Travel speed (C-track) | 3 m/s @25°℃ |
| Acceleration (C-track) | 10 m/s² @25°℃ |
| No. of torsion cycles | 2 Mio. |
| Torsion stress | ± 180%m |
| Torsion speed | 35 Cycles/min |
| Part number | |
| 3P | |
Female cordset
M8Female 9 0 ^ { \circ } A-cod.with cable
| C US LISTED Specifications |
| Family construction form |
| M8 No. of poles 3 |
| Coding A |
| Gender Female |
| Threaded hole M8 ×1 |
| Material PUR |
| Material contact Copper alloy |
| Coating contact Gold plated |
| Degree of protection (EN IEC 60529) IP65,IP66K,IP67 |
| Cable length 5M (The length can be customized according to customer requirements) |
| 0M |
| 1M |
| Electrical data |Supply |
| Operating voltage AC max 50V |
| Operating voltage DC max. 60V |
| Current operatingpercontactmax. 4A |
| Deviceprotection|Electrical |
| Pollution degree 3 |
| Rated surge voltage 1.5 kV |
| Material group (IEC 60664-1) 1 |
| Mechanicaldata|Materialdata |
| Screw connection Zinc die-casting |
| Coating of fitting Nickel plated |
| Locking material Zinc die-casting |
| Coating locking Nickeled |
| Gasket FKM |
| Environmentalcharacteristics|Climatic |
| Operating temperature min -25°C |
| Operating temperature max. 85°C |
| Conformity |
| Product standard EN/EC 61076-2-101 (M8) |
Female cordset
Installation|Cable
| installation|Cable | 20549 /10493 |
| UL AWM Style | |
| Stranding | 1×3Wires stranded |
| Filler | N/A |
| Wire arrangement | Brown,black, blue |
| Material wire insulation | PP |
| Amount wires | 3 |
| Outer diameter insulation | 1.25 ± 0.05mm |
| Shore hardness wire insulation | 70 ±5 Shore D |
| Conductor crossection (wire) | 0.25mm² |
| Material conductor wire Amount strands (wire) | Stranded copper wire, bare |
| Diameter of single wires | 32 |
| Material properties wire insulation | 0.1mm |
| Ingredient freeness wire insulation | Good machinability |
| Conductor type (wire) | Lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Outer-diameter (jacket) | Strand class 6 |
| Material jacket | 4.1mm±5% |
| Shore hardness jacket | PUR |
| Jacket color | 90 ± 5 Shore A |
| Freedom from ingredients (jacket) | Black /RAL 9005 |
| Material property (jacket) | Lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Conductor resistance (wire) | Abrasion-resistant, low adhesion, good machinability, matte |
| Nominal voltage max. | 79/km @20°℃ |
| Withstand voltage (wire - wire) | 300V |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacity (standard) | 2.5 kV@ 60 s |
| Current load capacity max. (wire) | to DIN VDE 0298-4 |
| Operating temperature (static) | 4.5A |
| Operating temperature (dynamic) | -40°℃C ... 80°C/90°℃ @10000 h Operation |
| -25℃C ... 80℃/90℃ @10000 h Operation | |
| Operating temperature (drag chain) | -25°℃C...80°C/90°C @10000 h Operation |
| Flame resistance | UL 1581 S 1090,CSA FT2,IEC 60332-2-2 |
| Oil resistance | IEC 60811-404 |
| Chemical resistance Other resistances | Good |
| Bending radius (fixed) | Good resistance to gasoline,resistant to hydrolysis,resistant to microbe |
| Bending radius (dynamic) | 5 × Outer diameter 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio.@25℃ |
| Traversing distance (C-track) | 10 m@25C |horizontal |
| Travel speed (C-track) | 3 m/s @25℃ |
| Acceleration (C-track) | 10 m/s²@ 25C |
| No. of torsion cycles | 2Mio. |
| Torsion stress | |
| ±180m | |
| Torsion speed | 35 Cycles/min |
| Part number 3P | xxxxxxxx |
Malecordset
M12Male 9 0 ^ { \circ } A-cod.with cable
Specifications
| Opeehcations | |
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | A |
| Gender | Male |
| Threaded hole | M12 × 1 |
| Material | PUR |
| Material contact | Copperalloy |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
| Cable length | 5M(The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electrical data | Supply | |
| Operating voltage AC max | 250V |
| Operating voltage DC max. | 250V |
| Current operating per contact max. | 4A |
| Device protection |Electrical | |
| Pollution degree | 3 |
| Rated surge voltage | 2.5kV |
| Material group (IEC 60664-1) | 1 |
| Mechanical data |Material data | |
| Screw connection | Zinc die-casting |
| Coating of fiting | Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | N/A |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -30°℃ |
| Operating temperaturemax. | 85°℃ |
| Conformity | |
| Product standard | EN IEC 61076-2-101 (M12) |
Installation|Cable
| UL AWM Style | 20549/10493 |
| Stranding | 4 Wires stranded |
| Filler | N/A |
| Wirearrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outerdiameter insulation | 1.25mm |
| Outerdiameter tolerancecore insulation | ±0.05mm |
| Shore hardness wire insulation | 70 ±5 Shore D |
| Conductor crosssection (wire) | 0.34 mm² |
| Material conductor wire | Stranded copper wire,bare |
| Amount strands (wire) | 42 |
| Diameter of single wires | 0.1mm |
| Material properties wire insulation | Good machinability |
| Ingredient freeness wire insulation | Lead-free,cadmium-free, CFC-free,halogen-free,silicone-free |
| Conductor type (wire) | Strand class 6 |
| Outer-diameter (jacket) | 4.5mm |
| Tolerance outer diameter (sheath) | ±5% |
| Material jacket | PUR |
| Shore hardness jacket | 90±5 Shore A |
| Jacket color | Black/RAL9005 |
| Freedom from ingredients (jacket) | Lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | Abrasion-resistant, lowadhesion, good machinability, matte |
| Conductor resistance (wire) | 57Ω /km @20°℃ |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @ 60 s |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Current load capacity max. (wire) | 4.8A |
| Operating temperature (static) | -40°℃...80°C/90°C@10000 hOperation |
| Operating temperature (dynamic) | -25℃C..80°℃/90℃@10000 h Operation |
| Operating temperature (drag chain) | -25°C...80C/90C@10000 hOperation |
| Flame resistance | UL 1581S1090,CSA FT2,IEC 60332-2-2 |
Male cordset
| Oil resistance | IEC 60811-404 |
| Chemical resistance | Good |
| Other resistances | Good resistance to gasoline,resistantto hydrolysis,resistantto microbes |
| Bending radius (fixed) | 5× Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio.@25℃C |
| Traversing distance (C-track) | 10 m@25C |horizontal |
| Travel speed (C-track) | 3m/s@25℃ |
| No. of torsion cycles | 5Mio. |
| Torsion stress | ±360m |
| Torsion speed | 35 Cycles/min |
| Partnumber | |
| 4P | XXXXXXXX |
Female cordset
M12Female 9 0 ^ { \circ } A-cod.with cable
CE u KEA e LISTED
| Specifications | |
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | A |
| Gender | Female |
| Threaded hole | M12× 1 |
| Material | PUR |
| Material contact | Copperalloy |
| Coating contact | Gold plated |
| Degree of protection (EN IEC 60529) | IP65,IP66K,IP67 |
| Cable length | 5M(The length can be customized according to customer requirements) |
| Cable length tolerance | 0M |
| Electrical data | Supply | |
| Operating voltage AC max | 250V |
| Operating voltage DC max. | 250V |
| Current operating per contact max. | 4A |
| Deviceprotection|Electrical | |
| Pollution degree | 3 |
| Rated surge voltage | 2.5 kV |
| Material group (IEC 60664-1) | 1 |
| Mechanicaldata|Materialdata | |
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | FKM |
| Environmentalcharacteristics|Climatic | |
| Operating temperature min | -30°℃ |
| Operating temperature max. | 85°℃ |
| Conformity | |
| Product standard | |
Installation|Cable
| UL AWM Style | 20549/10493 |
| Stranding | 4 Wires stranded |
| Filler | N/A |
| Wire arrangement | Brown,black,blue,white |
| Material wire insulation | PP |
| Amount wires | 4 |
| Outer diameter insulation | 1.25 mm |
| Outer diameter tolerance core insulation | ±0.05mm |
| Shore hardness wire insulation | 70 ±5 Shore D |
| Conductor crosssection (wire) | 0.34mm² |
| Material conductor wire | Stranded copper wire,bare |
| Amount strands (wire) | 42 |
| Diameter of single wires | 0.1mm |
| Material propertieswire insulation | Good machinability |
| Ingredient freeness wire insulation | Lead-free,cadmium-free,CFC-free, halogen-free,silicone-free |
| Conductor type (wire) | Strand class 6 |
| Outer-diameter (jacket) | 4.5mm |
| Tolerance outerdiameter (sheath) | ±5% |
| Material jacket | PUR |
| Shore hardness jacket | 90±5 Shore A |
| Jacket color | Black |
| Freedom from ingredients (jacket) | Lead-free,cadmium-free,CFC-free,halogen-free,silicone-free |
| Material property (jacket) | Abrasion-resistant, low adhesion, good machinability,matte |
| Conductor resistance (wire) | 57Ω/km@20C |
| Nominal voltage max. | 300V |
| Withstand voltage (wire - wire) | 2.5 kV @ 60 s |
| Withstand voltage (wire - jacket) | 2.5 kV @60 s |
| Current load capacity (standard) | to DIN VDE 0298-4 |
| Current load capacity max. (wire) | 4.8A |
| Operating temperature min. (static) | -40℃ |
| Operating temperature max. (fixed) | 80C/90C@10000 h Operation |
| Operating temperature min. (dynamic) | -25C |
| Operating temperaturemax. (dynamic) | 80°C/90C@10000 h Operation |
| Flame resistance | UL 1581 $1090|IEC 60332-2-2|UL 1581 $1100 FT2 |
Female cordset
| Oil resistance | Good,application-related testing |DIN EN 60811-404 |
| Chemical resistance | Good,application-related testing |
| Gasoline resistance | Good,application-related testing |
| Bending radius (fixed) | 5× Outer diameter |
| Bending radius (dynamic) | 10 × Outer diameter |
| No.of bending cycles (C-track) | 10 Mio.@ 25℃ |
| Traversing distance (C-track) | 10 m@25C |horizontal |
| Travel speed (C-track) | 3 m/s@25°℃ |
| No.of torsion cycles | 2 Mio. |
| Torsion stress | ±180m |
| Torsion speed | 35 Cycles/min |
| Partnumber | |
| 4P | XXXXXXXX |




