SHANGHAI UPG INTERNATIONAL INDUSTRY & TRADE GROUP CO., LTD.

This fully automatic energy-saving blow molding machine is equipped with an 18L accumulator-type die head.It can

manufacture hollow products with capacities up to 160L, including water drums, oil tanks, automotive parts and more.

Featuring a unique 3-cylinder plus 2-pillar clamping system, the machine boasts robust structure, even force distribution

and extended service life.

Fitted with premium linear guide rails, the equipment runs at higher traveling speed with reduced power consumption

and improved production yield.

LQBA120-160L Fully Automatic 160L Blow Molding Machine Max. Product Volume 160 L Max.Mold Size(W×H) 160 L

Suitable Raw Material PE, PP Die Head Type Accumulator die head Dry Cycle 300 Pcs/h Accumulator Capacity 18 L Screw Diameter 120 mm Max.Die Diameter 480 mm Screw L/D Ratio 28 L/D Die Head Heating Power 25 Kw Screw Drive Power 75-90 Kw Die Head Heating Zone 5 Zone Screw Heating Power 30 Kw Blowing Pressure 0.6 Mpa Screw Heating Zone 5 Zone Air Consumption 1.6 m³/min HDPE Output 200-250 Kg/h Cooling Water Pressure 0.3 Mpa Oil Pump Power 45 Kw Water Consumption 180 L/min Clamping Force 800 kn Machine Dimension(L×W×H) 5.8 × 2.9 × 4.7 m Mold Open & Close Stroke 600 - 1500 mm Machine Weight 22 Ton Mold Template Size(W×H) 1120 × 1300 mm Specifications

Features The above technical parameters are subject to the real product. Machine can be customized for special products. 1

This is a 30L all-electric, single-station, single-diehead, three-layer high-speed extrusion blow molding machine tailored

for automated production lines.

It is engineered to produce a full range of 20L~30L packaging containers widely used in chemical and pharmaceutical

sectors.

The machine realizes full-process automatic operations including automatic deflashing, three-stage post-cooling &

shaping, inline weighing and leakage testing during production.

Featuring high automation level and all-electric energy-efficient construction, the production line meets modern

manufacturing demands for cost cutdown and productivity uplift.

LQEB(50+70+60)-30L

All-electric Automatic High-speed Blow Molding Machine

Raw Material PE...... Mold platen size(W×H) 650 × 650 mm

Max. Product Volume 30 L Max mold size(W×H) 620 × 600 mm

Dry Cycle 620 Pcs/h Mold thickness range 560 ± 5 mm

Inner/Middle/Outer Screw Diameter 50 mm 70mm 60mm Max. die diameter 230 mm

Inner/Middle/Outer Screw L/D ratio 30 L/D Die head heating power 15.4 Kw

Inner/Middle/Outer Screw motor power 18.1Kw 39.3Kw 22.3Kw Die head heating zone 8 Zone

Inner/Middle/Outer Screw heating power 8 Kw 14.5 Kw 11 Kw Blowing pressure 0.7 Mpa

Inner/Middle/Outer Screw heating zone 4 Zone Cooling Water Pressure 0.4 Mpa

HDPE output 65Kg/h 110Kg/h 75Kg/h Water Consumption 100 L/min

Clamping Force 300 kn Machine Dimension(L×W×H) 6.4 × 3.4 × 3.7 m

Mold opening stroke 560-1000 mm Machine Weight 15 Ton

Mold moving stroke 750 mm

Specifications

Features

Outer Layer

Middle Layer

Inner Layer

The above technical parameters are subject to the real product. Machine can be customized for special products.

2

LQH70-12L/90-12LII

Fully Automatic 12L Blow Molding Machine

This is a single/double-station, single-head, fully automatic extrusion blow molding machine equipped with a crank-arm

clamping system.

It is suitable for producing 1L to 12L PE/PP bottles, such as motor oil bottles and lubricating oil containers.

The machine can be integrated with various automation equipment, helping reduce labor costs and improve production

efficiency.

The die head can be replaced with double, triple, or quadruple dies to produce small-capacity hollow products in multiple

specifications, increasing output while lowering energy consumption.

A liquid filling line function can also be added to expand your product range.

Features

Station

Model

Max. Product Volume

Single Double

LQH70-12L LQH90-12LII

12 L 12 L

Suitable Raw Material PE, PP PE, PP

Dry Cycle 900 Pcs/h 600 × 2 Pcs/h

Screw Diameter 70 mm 90 mm

Screw L/D Ratio 25 L/D 25 L/D

Screw Drive Power 22 Kw 37 Kw

Screw Heating Power 10.8 Kw 21 Kw

Screw Heating Zone 3 Zone 4 Zone

Mold Open & Close Stroke 280 - 750 mm 280 - 750 mm

Specifications

3

Mold Template Size(W×H)

Mold Moving Stroke

570 × 540 mm 570 × 540 mm

620 mm 750 mm

Max. Mold Size(W×H)

Clamping Force

570 × 500 mm 570 × 500 mm

120 Kn 120 Kn

Die Head Type Continuous die head Continuous die head

Max. Die Diameter 200 mm 200 mm

Die Head Heating Power 3 Kw 3 Kw

Die Head Heating Zone 4 Zone 4 Zone

Blowing Pressure 0.6 Mpa 0.6 Mpa

Air Consumption 0.8 m³/min 0.8 m³/min

Cooling Water Pressure

HDPE Output

0.3 Mpa 0.3 Mpa

75 Kg/h 140 Kg/h

Water Consumption

Oil Pump Power

60 L/min 80 L/min

11 Kw 11 Kw

Machine Dimension 4.6 × 2.3 × 2.7 m 5.3 × 3.8 × 2.8 m

Machine Weight 7.8 Ton 11 Ton

The above technical parameters are subject to the real product. Machine can be customized for special products.

4

LQH60-5L/70-5LII

Fully Automatic 5L Blow Molding Machine

This is a single (double)-station, single-head, fully automatic extrusion blow molding machine with a crank-arm clamping

system.

It is suitable for producing 1L to 5L PE/PP bottles, such as cosmetic containers and beverage containers.

The machine can be integrated with various automation equipment, helping to reduce labor costs and improve

production efficiency.

The die head can be replaced with double, triple or quadruple dies to produce small-capacity hollow products in multiple

specifications, increasing output while lowering energy consumption.

A liquid filling line function can also be added to expand the product range.

Features

Station

Model

Max. Product Volume

Single Double

LQH60-5L LQH70-5LII

5 L 5 L

Suitable Raw Material

PE, PP PE, PP

Dry Cycle

1100 Pcs/h 700 × 2 Pcs/h

Screw Diameter

60 mm 70 mm

Screw L/D Ratio

25 L/D 25 L/D

Screw Drive Power

15 Kw 22 Kw

Screw Heating Power

8.1 Kw 10.8 Kw

Screw Heating Zone

3 Zone 3 Zone

Mold Open & Close Stroke

220 - 700 mm 220 - 700 mm

Specifications

5

Mold Template Size(W×H)

Mold Moving Stroke

350 × 425 mm 350 × 425 mm

420 mm 550 mm

Max. Mold Size(W×H)

Clamping Force

350 × 425 mm 350 × 425 mm

70 Kn 70 Kn

Die Head Type

Continuous die head Continuous die head

Max. Die Diameter

150 mm 150 mm

Die Head Heating Power

2.5 Kw 2.5 Kw

Die Head Heating Zone

3 Zone 3 Zone

Blowing Pressure

0.6 Mpa 0.6 Mpa

Air Consumption

0.5 m³/min 0.5 m³/min

Cooling Water Pressure

HDPE Output

0.3 Mpa 0.3 Mpa

60 Kg/h 75 Kg/h

Water Consumption

Oil Pump Power

50 L/min 60 L/min

7.5 Kw 7.5 Kw

Machine Dimension

3.8 × 2.1 × 2.5 m 4.0 × 2.7 × 2.6 m

Machine Weight 4.8 Ton 7 Ton

The above technical parameters are subject to the real product. Machine can be customized for special products.

6

LQHT100-30LII Fully Automatic 12L Blow Molding Machine This high-speed servo-driven blow molding machine is designed for producing bottles up to 30L.

The double-station configuration with a single die head delivers high output, with a production capacity of approximately

130 pieces per day.

Equipped with a crank-arm mold locking unit, it provides greater clamping force than standard models.

It supports a fully automatic production line, including automatic deflashing, waste material handling, and finished bottle

delivery, and can be reliably integrated with other auxiliary equipment.

Features

Suitable Raw Material

Mold Template Size(W×H)

PE, PP Oil Pump Power

620 × 680 mm

22 Kw

Max. Product Volume

Max. Mold Size(W×H)

30* L

Dry Cycle 600 × 650 mm

Die Head Type

400×2 Pcs/h

Screw Diameter Continuous die head

Max. Die Diameter

100 mm

Screw L/D ratio 260 mm

Die Head Heating Power

25 / 28 L/D

Screw Drive Power 10 Kw

Die Head Heating Zone

55 / 75 Kw

Screw Heating Power 5 Zone

Blowing Pressure

19.4 / 22 Kw

Screw Heating Zone 0.6 Mpa

Cooling Water Pressure

4/5 Zone

HDPE Output 0.3 Mpa

Water Consumption

180 / 220 Kg/h

Clamping Force 90 L/min

Machine Dimension(L×W×H)

220 kn

Mold Open & Close Stroke 5.8 × 4.6 × 3.5 m

Machine Weight

420 - 975 mm

Mold Moving Stroke 850 mm 17.5 Ton

Specifications

The above technical parameters are subject to the real product. Machine can be customized for special products. 7

LQSJ-CP SERIES

Linear Full Servo Blow Moulding Machine

The LQSJ-CP Series Linear Full Servo Blow Moulding Machine features a continuous, high-speed preform feeding

system with multiple protection devices for precise preform feeding. It is equipped with a servo motor-driven preform

transfer and fetch system, enabling quick transfer and accurate preform positioning. The blowing and clamping system

adopts a servo-driven design with synchronized base blow moulds for fast-response operation, paired with precision

electromagnetic valves that deliver fast response times and support high-volume production.

Specifications

Features

Theoretical Output

Model

11000 Pcs/h 13500 Pcs/h 18000 Pcs/h 16000 Pcs/h 18000 Pcs/h 21000 Pcs/h

30 mm

LQSJ-CP5L LQSJ-CP6 LQSJ-CP8S LQSJ-CP7L LQSJ-CP8 LQSJ-CP10S

Max. Neck Size 30 mm 30 mm 30 mm 30 mm 30 mm

Max. Volume 2.5 L

350 mm

1.5 L

350 mm

0.75 L

300 mm

2.5 L

350 mm

1.5 L

350 mm

0.75 L

Max. Height 300 mm

Max. Diameter 115 mm 95 mm 70 mm 115 mm 95 mm 70 mm

Number of Cavities

Power

Heating Power 128 Kw

5

220 - 380 V 50 - 60 Hz

6 8 7 8 10

Total Power

Main Body Dimension

(L×W×H)

Main Body Weight

5.2 × 1.8 × 2.3 m 5.8 × 1.8 × 2.3 m

6000 Kg

152 Kw

6500 Kg

The above technical parameters are subject to the real product. Machine can be customized for special products.

8

LQEB60-2L/2-L All-electric Automatic High-speed Blow Molding Machine This 2L all-electric single-station dual-head single-layer high-speed blow molding machine is suitable for producing

10mL-1L small packaging containers for chemical and pharmaceutical industries, featuring automatic deflashing, flash

collection and recycling, on-line finished product leak detection before output, high automation, all-electric energy-saving

design, smooth and quiet operation, meeting modern production needs for cost reduction and efficiency improvement.

Features

Suitable Raw Material PE, PP Mold Template Size(W×H) 320 × 350 mm Max. Product Volume 1 L Max. Mold Size(W×H) 320 × 350 mm Dry Cycle 420 Pcs/h Die Head Type Continuous die head Screw Diameter 60 mm Max. Die Diameter 45 mm Screw L/D ratio 24 L/D Die Head Heating Power 4 Kw Screw Drive Power 17 Kw Die Head Heating Zone 5 Zone Screw Heating Power 8.1 Kw Blowing Pressure 0.6 Mpa Screw Heating Zone 3 Zone Cooling Water Pressure 0.3 Mpa HDPE Output 50 Kg/h Water Consumption 35 L/min Clamping Force 40 kn Machine Dimension(L×W×H) 3.6 × 1.8 × 2.7 m Mold Open & Close Stroke 200 - 400 mm Machine Weight 4.0 Ton Specifications The above technical parameters are subject to the real product. Machine can be customized for special products. 9

LQHT80-5LII/8

Full Automatic 5L Blow Molding Machine

High-speed servo blow molding machine for bottles up to 500ml, with a high production capacity of about 110,000 pcs/

day via a double-station, 8-die-head configuration. Equipped with a crank-arm mold locking unit that delivers greater

clamping force than standard models, this fully automatic production line features auto de-flashing, waste material

handling and finished bottle delivery, and supports seamless integration with other auxiliary equipment.

Features

Station Double Mold Moving Stroke 600 mm

Max. Product Volume 500 ML Template Size(W×H) 550 × 300 mm

Dry Cycle 1400 Pcs/h Center Distance 60 mm

Screw Diameter 80 mm Max. Die Diameter 16 mm

Screw L/D ratio 28 L/D Die Heating Power 9.2 Kw

Screw Drive Power 30 Kw No. of Heating Zone 10 Zone

Screw Heating Power 3.85 × 4 Kw Blowing Pressure 0.6 Mpa

Screw Heating Zone 4 Zone Cooling Water Pressure 0.3 Mpa

HDPE Output 100 Kg/h Water Consumption 85 L/min

Clamping Force 120 kn Machine Dimension(L×W×H) 4.95 × 3.3 × 2.6 m

Mold Stroke 150 - 330 mm Machine Weight 8.0 Ton

Specifications

The above technical parameters are subject to the real product. Machine can be customized for special products.

10

This machine features a horizontal rotation transfer system for easy installation and maintenance, reducing spare parts

replacement costs; a compact preform heating distance design enables efficient heating and lower energy consumption;

CAM linkage-driven mould closing eliminates chain plate pin shafts, resulting in a compact footprint and long service

life; durable hard claws for preform and bottle handling offer excellent wear resistance; a servo motor drive system with

synchronized base blow moulds ensures fast response and precise blowing valves for high output; stainless steel piping

delivers clean, pollution-free air; bottle mould slides simplify installation; and a 9-inch LCD HMI control system ensures

easy operation.

LQB-5SSL/6SS High Speed Blow Moulding Machine Specifications Features Theoretical Output Model 7500 Pcs/h 10000 Pcs/h LQB-5SSL LQB-6SS Max. Neck Size 38 mm 38 mm Max. Volume 2.5 L 360 mm 1.5 L 360 mm Max. Height Max. Diameter 115 mm 95 mm Number of Cavities Power Heating Power 96 Kw 96 Kw 220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz 5 6 Total Power Main Body Dimension (L×W×H) Main Body Weight 4.1 × 1.84 × 2.2 m 4.1 × 1.84 × 2.2 m 4000 Kg 4000 Kg 108 Kw 108 Kw The above technical parameters are subject to the real product. Machine can be customized for special products. 11

This machine features full-process PLC-controlled HMI operation with auto-loading, blowing and dropping, magnetic

induction switches for step monitoring, automatic alarms and fault display; it delivers fast, precise and smooth

performance, with optional cross double crank clamping for strong force and adjustable mould opening stroke to save

time; far infrared lamps heat rotating preforms uniformly with independent temperature control, while the pre-heater

design shortens heating tunnels to reduce energy use; its multi-stage air supply system and clear, reliable valve design

meet diverse product needs, supported by energy-efficient servo motors, automatic lubrication and fully automatic

pollution-free production, combining low investment, high efficiency, easy operation and maintenance, and high safety.

LQB-3S/4S/4SS/6S

Blow Moulding Machine

Specifications

Features

Theoretical Output

Model

3500 Pcs/h 4500 Pcs/h 6000 Pcs/h 6000 Pcs/h

38 mm

LQB-3S LQB-4S LQB-4SS LQB-6S

Max. Neck Size 38 mm 38 mm 38 mm

Max. Volume 2.0 L

350 mm

2.0 L

350 mm

2.0 L

350 mm

2.0 L

Max. Height 350 mm

Max. Diameter 100 mm 100 mm 100 mm 100 mm

Number of Cavities

Power

Heating Power 64 Kw 64 Kw 48 Kw 64 Kw

220 - 380 V 50 - 60 Hz

3 4 4 6

Total Power

Main Body Dimension (L×W×H)

Main Body Weight

3× 1.5 × 2.2 m 3.4× 1.55 × 2.2 m 3.4× 1.55 × 2.2 m 3.85× 1.7 × 2.2 m

2750 Kg 3450 Kg 3450 Kg 3450 Kg

67 Kw 67 Kw 58 Kw 67 Kw

The above technical parameters are subject to the real product. Machine can be customized for special products.

12

The machine adopts PLC control (with time relay control as an optional feature), offering easy maintenance and low cost,

with time control accurate to 0.01 seconds. Its gas circuit includes both moving and blowing functions to meet different

air requirements. The far-infrared heater uses conversion self-rotating heating with rail revolution, ensuring even, fast

and reliable heating. It requires only one operator with no special training, featuring easy installation and simple startup.

LQMS-4/4A

Semi-Automatic Blow Moulding Machine

Specifications

Features

Theoretical Output

Model

2200 Pcs/h 2500 Pcs/h

LQMS-4 LQMS-4A

Max. Neck Size 38 mm 38 mm

Max. Volume 1.5 L

360 mm

1.5 L

Max. Height 360 mm

Max. Diameter 100 mm 100 mm

Number of Cavities

Power

Heating Power

Heater Dimension

32 Kw

1.8 × 0.6 × 1.4 m

32 Kw

1.4 × 0.6 × 1.65 m

220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz

4 4

Total Power

Heater Weight

Main Body Dimension (L×W×H)

Autoloader Dimension (L×W×H)

Main Body Weight

Autoloader Weight

1.9 × 0.9 × 2.2 m

\\

1.9 × 0.9 × 2.2 m

1.4 × 0.7 × 1.8 m

1300 Kg

\\

1300 Kg

150 Kg

33 Kw

230 Kg

33 Kw

230 Kg

The above technical parameters are subject to the real product. Machine can be customized for special products. 13

This machine features a human-machine interface and PLC-controlled automatic process (loading, blowing, dropping)

with step-by-step safety interlock and fault display. It offers high speed, precise positioning, and smooth operation.

Optional cross double crank clamping provides strong force with adjustable mold opening stroke for different bottle sizes.

The far-infrared heating system ensures uniform preform heating with independent zone control; a compact preheater

design saves space and energy. Its multi-stage air supply system supports various products, while automatic lubrication

ensures long machine life. The fully automatic, pollution-free process delivers low investment, high efficiency, easy

operation, and simple maintenance.

LQB-2-10/3-5

Automatic Blowing Machine

Specifications

Theoretical Output

Model

1600 Pcs/h 2500 Pcs/h

LQB-2-10 LQB-3-5

Max. Neck Size 48 mm 48 mm

Max. Volume 10 L

430 mm

7 L

Max. Height 350 mm

Max. Diameter 220 mm 190 mm

Number of Cavities

Power

Heating Power 80 Kw 80 Kw

220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz

2 3

Total Power

Main Body Dimension (L×W×H)

Main Body Weight

3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m

3500 Kg 4100 Kg

90 Kw 90 Kw

Features

Model LQB-2-10 LQB-3-5

Max. Neck Size 48 mm 48 mm

Max. Height 430 mm 350 mm

Number of Cavities

Heating Power 80 Kw 80 Kw

2 3

Main Body Dimension (L×W×H) 3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m

The above technical parameters are subject to the real product. Machine can be customized for special products.

14

This machine is designed for blowing 0.5–1.5L common PET bottles. It adopts a

durable PLC microcomputer control system with time accuracy up to 0.01 seconds.

The far-infrared heater features self-rotating heating via rail revolution for even,

fast and reliable preform heating, with each lamp having independent temperature

control to achieve optimal results. Its unique preheater design keeps preforms close

during heating, reducing space, shortening the heating tunnel and cutting energy

consumption; the blowing section also adapts to bottle size changes. It is easy to

install and start up.

LQM-3

Automatic Blowing Machine

Specifications

Features

Theoretical Output

Model

2200 Pcs/h

LQM-3

Max. Neck Size 38 mm

Max. Volume 1.5 L

Max. Height 360 mm

Max. Diameter 100 mm

Number of Cavities

Power

Heating Power 32 Kw

220 - 380 V 50 - 60 Hz

3

Total Power

Main Body Dimension (L×W×H)

Main Body Weight

2.3 × 1.5 × 2.2 m

1650 Kg

33 Kw

The above technical parameters are subject to the real product. Machine can be customized for special products. 15

LQSJ-2/2SS/4MS/4SS

Automatic Blowing Machine

This machine features a touch-type color HMI system for easy operation. Its bottle outlet system can be equipped with

a linking unit to connect to a conveyor system, directly delivering finished bottles to subsequent processes or linking to

a filling machine, which reduces secondary bottle pollution and saves labor. The unique modular design supports both

mechanical feeding and manual loading, maximizing the machine’s versatility and advantages.

Specifications

Features

Theoretical Output

Model

2500 Pcs/h 3000 Pcs/h 5000 Pcs/h 6000 Pcs/h

38 mm

LQSJ-2 LQSJ-2SS LQSJ-4MS LQSJ-4SS

Max. Neck Size 38 mm 38 mm 38 mm

Max. Volume 1.5 L

320 mm

1.5 L

320 mm

0.6 L

300 mm

1.5 L

Max. Height 320 mm

Max. Diameter 105 mm 105 mm 65 mm 105 mm

Number of Cavities

Power

Heating Power 60 Kw 60 Kw 80 Kw 80 Kw

220 - 380 V 50 - 60 Hz

2 2 4 4

Total Power

Main Body Dimension (L×W×H)

Main Body Weight

2.7 × 1.6 × 2.2 m 2.7 × 1.6 × 2.2 m 3.3 × 1.6 × 2.2 m 4.6 × 1.6 × 2.2 m

2200 Kg 2200 Kg 2600 Kg 4000 Kg

63 Kw 66 Kw 88 Kw 90 Kw

The above technical parameters are subject to the real product. Machine can be customized for special products.

16

LQSJ-2W/1W/1-20 Hand-inserted Automatic Bottle Blowing Machine This machine is capable of blowing a wide range of PET containers, including carbonated beverage bottles, mineral

water bottles, pesticide bottles, cosmetic bottles and jars. Featuring manual preform loading and automatic bottle

blowing, it requires no technical training for operators, and delivers a stable output of 1,400–2,000 pcs/h with low

operating cost.

Machine Features

Specifications

Theoretical Output

Model

1200 Pcs/h 600 Pcs/h 600 Pcs/h

LQB-2-10 LQB-3-5 LQB-3-5

Max. Neck Size 48 mm 48 mm 48 mm

Max. Volume 3 L

430 mm

5 L 20 L

Max. Height 350 mm 350 mm

Max. Diameter 150 mm 180 mm 300 mm

Number of Cavities

Power

Heating Power 80 Kw 80 Kw

220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz

2 3 3

Total Power

Main Body Dimension (L×W×H)

Main Body Weight

3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m

2200 Kg 2200 Kg 2600 Kg

67 Kw 35 Kw 105 Kw

Specifications

Model LQSJ-2W LQSJ-1W LQSJ-1-20

Max. Neck Size 150 mm 150 mm 90 mm

Max. Height 320 mm 360 mm 490 mm

Number of Cavities

Heating Power 64 Kw 32 Kw 102 Kw

2 1 1

Main Body Dimension (L×W×H) 2.8 × 2.0 × 2.2 m 2.6 × 1.9 × 2.2 m 3.1 × 1.9 × 2.2 m

The above technical parameters are subject to the real product. Machine can be customized for special products.

17

LQS SERIES

Semi-automatic Blow Moulding Machine

Theoretical Output

Model

200-900 Pcs/h

LQS-1

Max. Neck Size 90 mm

Max. Volume 7 L

Max. Height 360 mm

Max. Diameter 220 mm

Number of Cavities

Power

Heating Power 9.6 Kw

220 - 380 V 50 - 60 Hz

1-2

Total Power

Main Body Dimension (L×W×H)

Heater Size(L×W×H)

Main Body Weight

Heater Weight

1.5 × 0.65 × 2.0 m

1.4 × 0.6 × 1.4 m

550 Kg

185 Kg

11 Kw

Controlled by a microcomputer, the technical parameters involved can be controlled more accurately.

After process improvement, the formed PET bottle can withstand a temperature of 85 ℃ ,

which solves the problem of traditional food and beverage packaging.

Theoretical Output

Model

200 Pcs/h

LQS-2

Max. Neck Size 38 mm

Max. Volume 3.0 L

Max. Height 360 mm

Max. Diameter 120 mm

Number of Cavities

Power

Heating Power 9.6 Kw

220 - 380 V 50 - 60 Hz

2

Total Power

Main Body Dimension (L×W×H)

Heater Size(L×W×H)

Main Body Weight

Heater Weight

1.5 × 0.65 × 2.0 m

1.4 × 0.6 × 1.4 m

530 Kg

185 Kg

11 Kw

The above technical parameters are subject to the real product. Machine can be customized for

special products.

The above technical parameters are subject to the real product. Machine can be customized for

special products.

18

Theoretical Output

Theoretical Output

Theoretical Output

Model

Model

Model

1800 Pcs/h

150 - 400 Pcs/h 300 - 500 Pcs/h

90-200 Pcs/h

LQS-4

LQS-1-10 LQS-2-5

LQS-1-20

Max. Neck Size

Max. Neck Size

Max. Neck Size

38 mm

120 mm 48 mm

120 mm

Max. Volume

Max. Volume

Max. Volume

3.0 L

10.0 L 5.0 L

20.0 L

360 mm

500 mm 360 mm

550

Max. Height

Max. Height

Max. Height

Max. Diameter

Max. Diameter

Max. Diameter

120 mm

220 mm 210 mm

300 mm

Number of Cavities

Number of Cavities

Number of Cavities

Heating Power

Heating Power

Heating Power

38.4 Kw

38.4 Kw 32 Kw

64 Kw 2

1-2

2

1-2

Total Power

Total Power

Total Power

Main Body Dimension (L×W×H)

Main Body Dimension (L×W×H)

Main Body Dimension (L×W×H)

Heater Size(L×W×H)

Heater Size(L×W×H)

Heater Size(L×W×H)

Main Body Weight

Main Body Weight

Main Body Weight

Heater Weight

Heater Weight

Heater Weight

1.5 × 0.65 × 2.0 m

1.75×0.65×2 m 1.9×0.9×2.2 m

1.75 × 0.78 × 2.0 m

1.8 × 0.6 × 1.4 m

1.8×0.6×1.4 m 1.8×0.6×1.6 m

2.7 × 0.7 × 1.6 m

530 Kg

900 Kg 1300 Kg

1250 Kg

230 Kg

230 Kg 230 Kg

370 Kg

40 Kw

40 Kw 33 Kw

66 Kw

The above technical parameters are subject to the real product. Machine can be customized

for special products.

The above technical parameters are subject to the real product. Machine can be customized

for special products.

The above technical parameters are subject to the real product. Machine can be customized

for special products.

19

BLOW MOULD

We are a professional manufacturer of PET/

PP preform, cap and blow moulds in China,

covering applications in mineral water, soft

drinks, juice and other food & non-food fields.

We offer a full range of PET preform and cap moulds

(including double-lock pneumatic needle valve, ultrashort gate, jar and 5-gallon moulds) with custom design

support. Backed by continuous R&D from our senior

engineering team, our moulds enable customers

to produce high-quality PET preforms and bottles

stably with lower investment, faster startup and lower

maintenance costs.

20

48-cavity preform mould 8-cavity jar preform mould PET PREFORM/CAP MOULD

Application:

-for water, beverage, tea drinks, etc.

-for edible oil and condiment such as soy sauce.

-for cosmetic, health-care products, pharmaceutical, food field.

21

32-cavity flip cap mould 8-cavity flip cap mould

22

SHANGHAI UPG INTERNATIONAL INDUSTRY & TRADE GROUP CO., LTD.

23RD FLOOR MECHANICAL & ELECTRICAL MANSION

NO.600 HENGFENG ROAD SHANGHAI 200070 P.R.CHINA

TEL: 0086-21-6317 3900 0086-21-6353 0603

FAX: 0086-21-6353 8343

MAIL: sales@shanghai-upg.com

WEB: www.shanghai-upg.com

Website Youtube