123

• Step 1: Carefully remove all parts and check against PARTS LIST;

• Step 2: Spread open metal stand (A) and tighten stand lock screw on base to lock into open position;

• Step 3: Insert support pole of Central Pole Supports, one into the other to their full height following the right order of construction

(B&C);

• Step 4: Insert the support pole with prongs (D) to LED strip and join Central Plastic Disc(E) on plastic spiral tree coils directly

onto prongs(F) on top of Central Pole(E-a) (see insert);

• Step 5: Line up tree topper(G) and insert on top of Central Pole;

• Step 6: Connect the support pole( D) to the support pole( C) on the base

• Step:7: Line up tree topper star(G) and insert on top of Central Pole;

• Step:8: Hook the tension band(H) onto the hook on the base(A) to secure the tree body.

• Step:9: Ground Stake into place if necessary;