该页无缩略图
双挂钩Double Hook
二
| 颜色 Finish | 产品编号 Article-No. |
| 枪灰色 | Gun Metal K121.160.002 |
锅盖架PotLidRack
| 颜色 Finish | 产品编号 Article-No. |
| 枪灰色 Gun Metal | K161.160.001 |
刀架Knife Holder
| 颜色 Finish | 宽22cm Width22cm | 宽32cm Width32cm |
| 枪灰色 Gun Metal | K171.160.001 | K171.160.002 |
枪灰色
筷子笼 Chopstick Box
| 颜色 Finish | 单筷子笼 Single | 双筷子笼 Double |
| 枪灰色 | Gun Metal | K151.160.001 K151.160.002 |
枪灰色
上翻支撑 Flap Stay
开启角度Opening Angle:75°、 9 0 ^ { \circ } 、110°
安装方法 Installation
1）通过螺丝钉将安装件固定到柜体侧板上 Screwon themountingadapterto thesidewoodenpanel
安装尺寸InstallationMeasurement
| 开启角度 | 尺寸A mm | 尺寸C mm |
| 75° | 176.5 | 148 |
| 90° | 176.5 | 106 |
| 110° | 143.5 | 108 |
2）用螺钉将另一安装件固定到木质翻板上 Fix another mounting adapter to the wooden flap panel
或
2）用螺钉将另一安装件固定到铝框上 Fixanothermountingadapter to the aluminum frame
铝门框配件Adapter forAluninum Frame
| 钢质，镀镍亚光 Steel, nickel plated | |
| 上翻支撑 Flapstay | F342.320.000 |
| 铝框门配件 Adapter for aluminum frame | F340.329.000 |
包装／Packing:25 pcs
汽缸式上翻支撑 Lid Staywith Piston Rod
| 钢质，镀镍亚光 Steel, nickel plated | ||
| 上翻支撑 | Flap stay | F342.330.000 |
铝框门配件AdapterforAluminumFrame
| 钢质.镀镍亚光 Steel, nickel plated | |
| 铝框门配件 Adapter for aluminum frame | F340.339.000 |
包装/Packing:25 pcs明装吊码 Cabinet Hanger每对承重：150 kgLoad Capacity: 150 kg/pair安装说明Installation
高度调节16mm
Vertical adjustment 16mm 前后调节5mm
Depth adjustment 5mm 左右调节6mm
Lateral adjustment 6mm
| 钢质支撑件，配白色塑料外壳 Steel support part with white plastic cover | 左式 DIN left | 右式 DIN right |
| F 820.619.101 | F 820.619.102 |
隐藏式吊码 Concealed Cabinet Hanger
每对承重：130 kgLoad Capacity: 130 kg/pair
高度调节15mm
Vertical adjustment 15mm
前后调节最大8mm
Depth adjustment max.8mm
左右调节：采用吊钩时8mm,采用吊片时16mm
Lateral adjustment: Approx.8mm (with hook), max. 16mm (with wall rail)
| 钢质镀锌，配塑料灰色装饰盖 Steel, zinc plated, with grey plastic cap | 左式 DIN left | 右式 DIN right |
| F820.219.103 | F820.219.104 |
包装／Packing: 50 pcs 挂片Mounting Bracket
| 材质 Material | 产品编号 Article-No. |
| 钢质镀锌 Steel, zinc plated | F820.219.106 |
侧帮抽屉MetalDrawerRunner
半拉伸，高度86mm Single Extension,Height 86mm 安装尺寸 Installation dimensions
抽屉内的宽度=箱体的净宽 - 3 1 ~ \mathsf {mm } 抽屉内的长度=滑轨的长度-背板的厚度 - 2mm Drawerbasewidth \mathbf { \Sigma } = \mathbf { \Sigma } internal carcase width - 3 1 \mathsf {mm } Drawer base length \mathbf { \Sigma } = \mathbf { \Sigma } nominal length 2 \mathsf {mm } - rear panel thickness
安装示意图Installation打孔尺寸Drilling dimensions
| 轨道长度NL Normal length NL | 拉伸长度AL Extension length AL | 喷粉颜色 Finish | 产品编号 Article-No. |
| 300mm | 213mm | 喷粉，白色,RAL 9010 powder coated,white，RAL 9010 | F820.142.130 |
| 350mm | 263mm | 喷粉，白色,RAL 9010 powder coated,white，RAL 9010 | F820.142.135 |
| 400mm | 313mm | 喷粉，白色,RAL 9010 powder coated,white，RAL 9010 | F820.142.140 |
| 450mm | 363mm | 喷粉，白色,RAL 9010 powder coated,white，RAL 9010 | F820.142.145 |
| 500mm | 413mm | 喷粉，白色,RAL 9010 powder coated,white，RAL 9010 | F820.142.150 |
| 300mm | 213mm | 喷粉，灰色,RAL 9OO6 powder coated,grey，RAL 9006 | F820.132.130 |
| 350mm | 263mm | 喷粉，灰色,RAL 9OO6 powder coated,grey，RAL 9006 | F820.132.135 |
| 400mm | 313mm | 喷粉，灰色,RAL 90O6 powder coated,grey，RAL 9006 | F820.132.140 |
| 450mm | 363mm | 喷粉，灰色,RAL 9OO6 powder coated,grey，RAL 9006 | F820.132.145 |
| 500mm | 413mm | 喷粉，灰色,RAL 9OO6 powder coated, grey，RAL 9006 | F820.132.150 |
SPEEDY弧形钢抽Drawer Box 标准配置 Supplied with:
1.全拉伸自闭阻尼滑轨 1付 Full extension runners with self-closing and damping 1 pr
2.弧形抽屉帮 1付 Drawer sides 1 pr
3.抽屉面板连接件 1付 Front adapters 1 pr
4.抽屉后堵卡码 1付 Rear adapters 1 pr
5.装饰盖 1付 Trim caps 1 pr
总装图 General Assembly Drawing 装配尺寸图 Assembly Dimensions
| 产品编号 Article-No. | ||
| 长度260mm,灰色，带自闭及阻尼 | 260mm, grey,with self-closing and damping | F820.002.026 |
| 长度350mm,灰色，带自闭及阻尼 | 350mm, grey,with self-closing and damping | F820.002.035 |
| 长度420mm,灰色，带自闭及阻尼 | 420mm, grey,with self-closing and damping | F820.002.042 |
| 长度470mm,灰色，带自闭及阻尼 | 470mm,grey,with self-closing and damping | F820.002.047 |
| 长度520mm，灰色，带自闭及阻尼 | 520mm, grey,with self-closing and damping | F820.002.052 |
弧形钢抽安装说明InstallationManualforDrawerBox
1.面板接连 Front connecting
2.面板调节与拆装
Adjustment,assembly and disassembly of front
3.后背板安装 Rear panel assembly
4.滑轨安装 Runner assembly
SPEEDY 高身弧形钢抽 Drawer Box with Railing
标准配置Supplied with:
1.全拉伸自闭阻尼滑轨 1付 Full extension runners with self-closing and damping 1 pr
2.弧形抽屉帮 1付 Drawer sides 1 pr
3.抽屉面板连接件 1付 Front adapters 1 pr
4.纵杆及纵杆座 2套 Longitudinal rails & adapters 2 sets
5.抽屉加高后堵卡码 1付 Rear adapters 1 pr
6.装饰盖 1付 Trim caps 1 pr
| 产品编号 Article-No. | ||
| 长度260mm，灰色，带自闭及阻尼 | 260mm, grey,with self-closing and damping | F820.002.126 |
| 长度350mm灰色，带自闭及阻尼 | 350mm, grey,with self-closing and damping | F820.002.135 |
| 长度420mm.灰色，带自闭及阻尼 | 420mm, grey, with self-closing and damping | F820.002.142 |
| 长度470mm,灰色，带自闭及阻尼 | 470mm, grey，with self-closing and damping | F820.002.147 |
| 长度520mm,灰色，带自闭及阻尼 | 520mm, grey, with self-closing and damping | F820.002.152 |
高身弧形钢抽安装说明 Installation Manual for Drawer Box with Railing
1.面板接连 Front connecting
2.面板安装 Front panel assembly
3.后背板安装
Rear panel assembly
4.滑轨安装
5.加高杆拆装 Railing assembly and disassembly
简便的纵杆安装 Easy railing assembly 简便的纵杆安装 Easy railing assembly
·纵杆旋入后纵杆座 ·The longitudinal alings ·轻松转动纵杆 ·The front panel angle is adjusted for pot-and-pan 调节前面板角度 by simply turning therailing. drawers are inserted in back mount for it...
·用手扣入前纵杆座 ..and clicked into place without tools
全拉伸自闭阻尼滑轨 Full Extension Runners with Self-closing and Damping
钢质镀锌，全拉伸.承重： 3 0 ~ \mathsf {kg } Steel,zincplated,fullextension,load capacity:30 kg
| 长度Length | 产品编号 Article-No. |
| 260mm | F820.212.026 |
| 350mm | F820.212.035 |
| 420mm | F820.212.042 |
| 470mm | F820.212.047 |
| 520mm | F820.212.052 |
侧帮 Drawer Sides
钢质喷粉，灰色RAL9006，高度86mm Steel,powder coated, grey RAL 90o6, height 86mm
| 长度Length | 产品编号 Article-No. |
| 260mm | F820.132.026 |
| 350mm | F820.132.035 |
| 420mm | F820.132.042 |
| 470mm | F820.132.047 |
| 520mm | F820.132.052 |
前面板连接件FrontAdapter 后堵卡码RearAdapter
塑料.白色 Plastic, white
钢质，镀镍亚光 Steel,nickel plated
装饰盖Trim Cap
塑料.灰色
Plastic, grey
普通款 加高款 For drawer without railingFor drawer with railing
n
| 产品编号 Article-No. | ||
| 前面板连接件 Front adapters | F826.612.000 | |
| 装饰盖 Trim caps | F826.722.000 | |
| 后端堵 Rearadapters | F820.212.000 | |
| 加高后端堵 Rearadapters for railing drawer | F820.212.001 | |
纵杆及纵杆座 Longitudinal Rail&Adapter
| 产品编号 Article-No. | |
| 纵向加高杆(含卡码) Longitudinal rail withadapter | F820.212.200 |
铝合金加高杆Aluminum Rail
横向加高杆卡码Adapter for Horizontal Rail
1
| 产品编号 Article-No. | ||
| 铝合金加高杆 喷粉，灰色RAL9006，长度1200mm | Aluminum rail powder coated, grey RAL 9006,length 1200mm | F820.212.100 |
| 横向加高杆卡码 | Adapter for horizontal rail | F820.212.101 |
不锈钢 Stainless steel
铝合金Aluminum
艾森曼五金(北京)有限公司Eisenmann Hardware Technology(Beijing)Co.,Ltd
北京市朝阳区朝阳门北大街乙12号
北京天辰大厦1201室
邮编：100020
电话：+86-10-85636995
传真：+86-10-85636997
网址：www.eisenmann-hardware.com
邮箱：info@eisenmann-hardware.com Rm.1201,Beijing TimesonTower
No.Yi12,Chaoyangmen North.Str.
Chaoyang District,Beijing,CHN-1o20,China Tel ：+86-10-85636995
Fax:+86-10-85636997
Web:www.eisenmann-hardware.com
E-mail:info@eisenmann-hardware.com
