User manual

Instruction manual for use

OF

IN Instruction manual

FR

IS

IT

User instruction manual

Operating instructions

1166

ES Universal portable bottle warmer 70ºC

FR Universal portable bottle warmer 70ºC

EN Universal portable bottle warmer 70ºC

EN Universal Portable Bottle Warmer 70ºC

DE Universal portable baby bottle warmer 70ºC

WARM70

Machine Translated by Google

WARNINGS: IMPORTANT GENERAL

18. For repairs, contact the manufacturer. Do not attempt to disassemble or repair the appliance

yourself.

1. This appliance is not a toy. Keep it out of the reach of children and

6. During heating, avoid touching the bottle to avoid burns. After the

12. Before operating the appliance, make sure that the bottle contains liquid, to avoid dry overheating

which would cause the appliance to automatically switch off.

shelter from direct sunlight.

14. Use only a certified power adapter (5V - 2A) for charging.

and formula milk.

2. Do not allow unsupervised children, disabled people or people with reduced physical or sensory

capabilities to use the appliance.

7. Opening the lid or detaching the bottle immediately after heating may

correctly positioned to avoid leaks.

8. Never leave the device unattended when using the 70°C setting due to the risk of overheating or pressure

build-up.

15. Do not connect or disconnect the appliance with wet hands.

Use the appliance only on a flat, dry surface, away from water, hot stoves or ovens.

10. Operating temperature: 37°C to 70°C. Do not use outside this

17. Avoid heating milk for more than 30 minutes to avoid nutrient loss.

To ensure safe and correct use of this appliance, please read the following instructions carefully before

use:

5.

11. Do not use the device in environments with strong static electricity, magnetic fields, microwaves or

disinfection cabinets due to the built-in lithium battery.

19. When not in use, store the appliance in a cool, dry place, away from direct sunlight.

13. Unplug and switch off the appliance before assembling, disassembling, cleaning or leaving it

unattended. Do not immerse the appliance, power cord or USB charging port in water or

other liquids.

heating, the bottle and the milk contents can reach high temperatures. Do not touch the bottle

directly with your hands.

20. This appliance is intended exclusively for heating infant milk.

Please ensure that it is only used by responsible adults.

3. Before each use, make sure that the bottle connector seal is

release hot steam. Open with caution.

Fully charge the appliance before first use.

Avoid touching the stainless steel heating plate during operation to avoid burns.

16. After warming the milk, check its temperature on the back of your hand before giving it to your baby.

9. Do not close the bottle tightly immediately after heating.

4.

interval.

1166 ITALIAN

2

Machine Translated by Google

4.

2.

3.

6. Lid

Numeric display

1.

Silicone gasket

Heating plate

USB-C input

5.

7.

Power on/off button

Temperature selection

button

3

5

2

1

6

4 7

1. User Manual

2. Scaldabiberon

3. 5v 2A charger

5. Lid

3. The device can be used once the battery reaches 40%. The device will turn off.

4. Clean the USB port regularly to avoid dust accumulation.

2. Fully charge the appliance before first use (charging time: 4 hours).

1. Connect the USB Type-C cable to a certified charger (5V, 2A) and the bottle warmer.

6. 6 Bottle adapters

7. USB Type-C charging cable

4. Mixing propeller

PARTS LIST

BATTERY CHARGING INSTRUCTIONS

CONTROL PANEL

3

Machine Translated by Google

OF THE ADAPTER

IMAGE

53mm

Without adapter

Touch, Bearo, BarryBear, Born fair

MAM, Lansinoh, NIP, Avent, Pigeon Good-baby,

Chicco Perfect 5, Chicco Original

Avent, Chicco, BebeConfort, NIP

50mm

53 mm- 2

NAME

56 mm

Dr. Brown’s, Medela, NUK, Pigeon.

With narrow neck:

60 mm

J BIMBI, Suavinex, Drs. Brown’s

OF THE ADAPTOR

Chicco, Avent

40mm

SUITABLE FOR BOTTLE BRAND

Tommee Tippee (Advance anticholic)

SELECTING THE BOTTLE ADAPTER

4

Edley, Ainmei, Pigeon, NUK First Choice,

NOT standard neck

Bibs, Thermobaby, Daycheer, Difrax

Dr Brown's Natural Flow, Pigeon, Medela,

Machine Translated by Google

Make sure the silicone seal is firmly seated in

the adapter. Connect the adapter to the bottle.

Turn the device completely upside down and screw it

tightly onto the bottle until it creates an airtight seal.

Fill the bottle with water, milk or formula.

Select the adapter that best suits your bottle brand from

the 6 options included.

Turn the appliance upside down with the bottle

inserted to check for leaks.

3

5

2

1

5

4

2. Clean the outside with a damp cloth.

1. Remove all components from the packaging.

3. Leave the unused bottle warmer to rest for 12 hours to eliminate residual

production odors.

PREPARATION

OPERATIONAL GUIDE

Machine Translated by Google

5

6

2

1

6

• If not used, the device automatically switches off after 1 minute.

• The mixing propeller remains in its position thanks to a system of magnets. If the

magnetic sensor malfunctions, “E1” will be displayed and the appliance will switch

off.

USE:

• If there is no more liquid, the bottle warmer switches off to prevent overheating.

Once the liquid reaches the set temperature, the appliance

beeps and automatically maintains the temperature.

To end the warm-up manually:

To adjust the temperature, briefly press the button (6) to select

between 37°C, 40°C, 45°C, 50°C and 70°C.

Press and hold the power button (8) until the device turns on.

The display will show the previously set temperature.

(8) for 2 seconds to turn off the appliance.

Press and hold the power button

HEATING

Machine Translated by Google

•

current.

•

CONSERVATION

HEATING PLATE

•

ATTENTION

direct sunlight and humidity.

For sterilizing the heating plate and gaskets, both at home and away, we suggest using

our MellyPlus 1556 sterilizer. The MellyPlus 1556 sterilizer uses UV rays for natural and fast

cleaning. By creating ozone, it eliminates 99.9% of germs

and bacteria in just 2 minutes. Alternatively, it can be effective

to put a little boiling water on the plate or clean it with

disinfectant wipes, in this case, however, remember to

wash the plate with sterile water before using the product,

to remove disinfectant residues that could contaminate

the milk.

STERILIZATION OF THE PLATE

• Store in a cool, dry place, away from direct sunlight.

Use a soft cloth or toothbrush to gently scrub the inside.

• Do not steam sterilize the lid.

COVER

• Add clean water or a mild detergent to the plate.

Do not immerse the appliance in any liquid to avoid damage to the electrical

components.

Rinse thoroughly with water without immersing it in water

Clean with a damp cloth. Avoid using abrasive

cleaners or solvents.

EXTERNAL

•

CLEANING AND MAINTENANCE

7

Machine Translated by Google

• Charging time: 4 hours

Charging port: Type-C

Temperature settings: 5 temperature settings

Peso: 310g

Power: 60 W

Battery capacity: 9000mAh

Tension: 5V 2A/3A

• Model: 1166

•

•

•

•

•

•

PROBLEMS SOLUTIONS

Dispose of the device and battery at an authorized electronic waste disposal

facility. Follow local recycling guidelines.

TROUBLESHOOTING

DISPOSITION

PRODUCT SPECIFICATIONS

8

Check that the gasket is not missing or damaged and replace

it with a new one if necessary.

Contact customer service.

The On/Off button does not work

Contact customer service.

Loss

Make sure the adapter is mounted correctly.

Insert the adapter with the abbreviation

Press and hold the power button for 1.5 seconds

,

First, charge the bottle warmer to ensure the battery is

fully charged.

on the function keys side, facing you

It does not work

The On/Off button is stuck during heating. Wait for

heating to finish.

lay it down and rotate. It is not necessary to overtighten. Make

sure it is screwed straight and not tilted.

Connect a bottle containing water or milk to the bottle warmer.

Machine Translated by Google

9

WARRANTY - TERMS AND CONDITIONS

The manufacturer, distributor and all parties involved in the sale of the product are not responsible for

any economic losses or damages resulting from the malfunction of the product.

WARRANTY EXCLUSIONS: The following are excluded from the 24-month legal warranty:

3. The malfunction is caused by insufficient maintenance of the components, accessories or supplies

(e.g. oxidation, immersion in liquid of the electrical parts, residues blocking the sensor, leakage of

corrosive liquid from the batteries).

LIMITATIONS OF LIABILITY:

This product is covered by a 24-month warranty for manufacturing defects, starting from the date of

purchase proven by receipt or invoice. In case of purchase with invoice, the legal warranty is reduced to

12 months. The 24-month warranty does not include damage resulting from normal wear and tear of

the product, aesthetic damage, accessories or consumables (for example batteries, heads or components

subject to wear). Batteries are guaranteed for a period of 6 months.

3. Damage resulting from incorrect installation or improper use not in accordance with the

For further details on the assistance service, please consult the Conditions of Sale available on the

website www.nuvitababy.com.

2. The costs and risks associated with transporting the product to and from the point of sale or the

authorised centre for warranty management.

1. Costs for the replacement or repair of parts subject to wear and those relating to ordinary maintenance

of the product.

In accordance with the applicable legislation, they are not liable for direct or indirect damages, loss of income, savings

or other consequences arising from the use or inability to use the product and/or associated documentation (paper or

electronic), including the lack of service.

1. The product has been damaged due to improper use not in accordance with the instructions

4. Damage caused by natural disasters, falls, accidental impacts or environmental conditions

manual instructions.

WARRANTY VOIDANCE: The 12/24 month legal warranty lapses in the following cases:

2. The product has been modified, tampered with or opened.

5. Defects that negligibly affect the performance of the product.

incompatible with the product.

reported in the manual.

Machine Translated by Google

1, Ferris Bldg. St.Luke Street PTA1020 Gwardamangia

Malta - Europe

Anteprima Brands International Ltd

IMPORTED / DISTRIBUTED BY

1166_25_Manual_v1.0.0

All rights reserved

EN: Download or view the instruction manual online in your preferred language. ES: Download/view the instruction

manual online in your preferred language. EN : Download /view the instruction manual online in your preferred

language. FR: Download/view the instruction manual online in your preferred language. DE: Download/read the

instruction manual online in your preferred language. PT: Access the instruction manual online in your preferred

language. GR : ÿÿÿÿÿÿÿÿÿ. NO: Last ned eller se bruksanvisningen på nett på ditt foretrukne språk. FROM: Hent eller

læs brugsanvisningen online på dit foretrukne sprog. AL: Shkarkoni ose shikoni manualin e udhëzimeve në internet

në gjuhën tuaj you preferuar. HU: Töltse le vagy tekintse meg online a használati útmutatót az Ön által választott

nyelven. CZ: If you don't know what you're looking for, you can find it online and you'll prefer it. YES: Prenesite ali si

oglejte navodila za uporabo na spletu v želenem jeziku. BG: Here's what the story was about. Don't forget about it.

SK: Please remember that you can search online for your favorite items. RO: Please download the instruction manual

online in your preferred language.

www.nuvitababy.com

info@nuvitababy.com

Machine Translated by Google