该页无缩略图
BEIJING FAR EAST INSTRUMENT CO., LTD
FLAME
DETECTOR
SAMPLE SELECTION
FLAME DETECTOR SERIES
SAMPLE SELECTION
S
E
RIE
S
BEIJING FAR EAST INSTRUMENT CO., LTD
-02-
Company profile
Beijing Far East Instrument Co., Ltd. (hereinafter referred to as \"Beijing Far East Instrument\") is a high-techenterprise subordinate to Beijing BIIC Technology Co., Ltd. Adhering to the vision of \"becoming the leading automation instrument supplier in China\", BeijingFar East
Instrument is mainly engaged in the R&D, production and sales of flow meters, level gauges and intelligent flamedetectors at the industrial field. In the meantime, as a strategic partner of Emerson, the Company expandsthemarkets of the Rosemount series of measuring meters for pressure, temperature, flow and level in the cooperativeregions. The products and services of the Company are widely used in such industries as nuclear energy, petroleum, chemical engineering, electric power, metallurgy, light industry, pharmaceuticals and municipal
engineering. With the plant founded in 1955, the Company has gradually grown into the state-holding enterprise withthemixed ownership advantages in the industrial automation instrument
after multiple technology imports, joint venture cooperation and equity adjustment. The Companyinitiatedthe mixed ownership reform of state-owned enterprise in April 2020, and separated the primary and secondarybusinesses in July 2021 through existence and separation. Beijing Far East Instrument without the secondarybusiness is concentrated on the operation and development of industrial automation process instrumentation. After the development for over 60 years, Beijing Far East Instrument was first qualified in its ISO9001quality system certification in the instrument industry of Beijing in 1994 by virtue of its scientific management
system and management mechanism. The Company was identified as the municipal-level technologycenter inBeijing in 2004 and as the high-tech enterprise in 2008. The Company has maintained a series of market accessqualifications for a long time, including material supplier of China National PetroleumCorporation, material
purchasing e-commerce supplier of SINOPEC, qualified supplier of China National Nuclear Corporation, andqualified supplier of CHN Energy. It has been awarded with such honorary titles as Advanced Management
Enterprise in Beijing, \"Top 10 Enterprise\" in Beijing, Unit of \"Strictly Abiding by Contracts and KeepingFaith\", \"Spiritual Civilization Pacesetter in Capital\", Workers' Pioneer, Intellectual Property Pilot Unit in Beijing, andNational Advanced Enterprise of Quality and Efficiency in Mechanical Industry for consecutive years.
-03-ContentsCompany profile ...........................................................................................................................................................2List of Scientific and Technological Achievements....................................................................................................5Operating principle .......................................................................................................................................................7Product features............................................................................................................................................................8Product List.................................................................................................................................................................. 9Product Selection Guide .............................................................................................................................................10Models........................................................................................................................................................................ 11IFD-IR(UV)-111C Flameproof Integrated Flame Detector...................................................................................... 13IFD-UV-111 Flameproof Integrated Flame Detector................................................................................................15IFD-IR-101C Intelligent Integrated Flame Detector................................................................................................. 17IFD-IR (UV)-011C Flameproof Integrated Flame Detector..................................................................................... 19IFD-UV-011 Flameproof Integrated Flame Detector................................................................................................21GFD-UV-422Ex Flameproof Integrated UV Flame Detector...................................................................................23GFD-UV-412Ex Flameproof Integrated UV Flame Detector...................................................................................25SFD-522 (422) Flame Detection Amplifier...............................................................................................................27(Matched with SFD-IR-112(Ex))...............................................................................................................................27SFD-IR-112EX Split IR Flame Detector...................................................................................................................29(Matched with SFD-522 (422))..................................................................................................................................29Installation requirements............................................................................................................................................31Qualification Certificates............................................................................................................................................................31Product application cases and performance list..........................................................................................................................34
Product Introduction
-04-
Flame detector is the key equipment in Furnace Safety Supervision System (FSSS). Its role spans theentireprocess from boiler startup to full-load operation. It is used to determine the presence or absence of flames intheentire furnace or unit burner, indicating flame establishment/extinguishment. When the entire furnace or unit
burner extinguishment occurs, the corresponding flame detector contact accurately triggers an alarm. Withtheinterlocking function of the FSSS system, the operation of corresponding equipment such as coal feeders, coal
mills, main fuel oil valves, or primary air fans is stopped. This prevents the accumulation of fuel in the furnace, which could lead to ignition and the occurrence of catastrophic boiler explosions. Therefore, the performanceofthe equipment, including its reliability and detection accuracy, directly affects the operational safety andstabilityof the unit. Flame detectors of Beijing Far East Instrument originated from imported flame detection technology. After nearly 40 years of development, they have been fully localized, covering a complete series of domesticallymanufactured products. Based on microprocessor technology, flame detectors of Beijing Far East Instrument
detect the flame intensity and flicker frequency of the target flame, amplify and process the collectedflamesignals, and then analyze them through a series of calculations to determine the presence of the flame. Flamedetectors of Beijing Far East Instrument are widely used in the burners of small, medium, and large boilersinindustries such as electric power, petroleum, chemical, metallurgy, and papermaking. With a track recordof overa thousand installations, the flame detectors have garnered widespread acclaim from users. ICS.27.060.01
N 13
Filing No. 51600-2015
Machinery Industry Standards of
the People's Republic of China
JB/T 12389-2015
Integrated Flame Detector
Integrated flame detector
Issued on October 10, 2015
Implemented on March
1, 2016
Issued by the Ministry of Industry and Information
Technology of the people's Republic of China
Preamble
Scientific and Technological Achievements-05-List of Scientific and Technological Achievements
Name of scientific and
technological
achievements
Certificate No. Item Issued by
National Energy Science
and Technology Progress
Award
NEA-2010-Z-3-06-D01 IFD-IR-101 Integrated
Flame Detector
National EnergyAdministration
National Key New
Product Award
2011TJA00120 IFD-IR-101 Integrated
Flame Detector
Ministry of ScienceandTechnology of the People'sRepublic of China
Third Prize of National
Machinery Industry
Science and Technology
Award
1003004-01 Integrated Flame Detector China Machinery IndustryFederation
2010 Excellent Product
Award of China
Instrument and Control
Society
IFD-IR-101 Integrated
Flame Detector
China Instrument andControl
Society
Beijing Municipality
Independent Innovation
Product Award
CX2009XJ0218 Integrated Flame Detector Beijing Municipal Science&Technology CommissionIndustrial Design Patent ZL 2005 30022195.1 Integrated Flame Detector China National Intellectual
Property AdministrationUtility Model Patent
Certificate
ZL 2005 20136577.1 Integrated Flame Detector China National Intellectual
Property AdministrationUtility Model Patent
Certificate
ZL 2015 20650785.7 An intelligent flame
detection amplifier
China National Intellectual
Property AdministrationUtility Model Patent
Certificate
ZL 2007 2 0191045.7 Integrated Flame Detector China National Intellectual
Property AdministrationUtility Model Patent
Certificate
ZL 2013 20434134.5 Flameproof integrated
flame detector
China National Intellectual
Property AdministrationUtility Model Patent
Certificate
ZL 2014 2 0654138.9 Integrated UV Flame
Detector
China National Intellectual
Property AdministrationGFD-UV-422Ex
Conformity Certificate of
Explosion-proof
GYB22.3807X Integrated UV Flame
Detector
Shanghai InspectionandTesting Institute ofInstruments and AutomationSystems Co., Ltd. (SITIIAS), National InstrumentationExplosion-proof SafetySupervision and InspectionStation (NEPSI)
SFD-IR_112Ex
Conformity Certificate of
Explosion-proof
GYB21.1709X Flameproof split flame
detection probe
National InstrumentationExplosion-proof SafetySupervision and InspectionStation (NEPSI)
Product Introduction
-06-
IFD-UV-011a Conformity
Certificate of
Explosion-proof
GYB21.1710X Flameproof integrated UV
flame detector
National InstrumentationExplosion-proof SafetySupervision and InspectionStation (NEPSI)
IFD-a-011Cb Conformity
Certificate of
Explosion-proof
GYB21.1711X Flameproof integrated
flame detector
National InstrumentationExplosion-proof SafetySupervision and InspectionStation (NEPSI)
IFD-a-111b Conformity
Certificate of
Explosion-proof
CCRI 21.1498x Flameproof integrated
flame detector
National Work SafetyBeijingMine Shaft Equipment andMining Oil TestingandInspection Center
Product features-07-Operating principle
Based on the spectral characteristics of flame combustion, the presence and intensity of flames canbecomprehensively judged by detecting the flicker frequency and radiation intensity of the flame. The photoelectricsensor detects flame signals from the boiler burner and converts the flame signals into electrical signals. Afteramplification by the signal amplifier, the signals are divided into two channels, namely, intensity signal andfrequency signal, which then enter the DC channel and AC channel respectively. The intensity signal representsthe flame intensity, while the frequency signal represents the flickering of the flame. The DCchannel furtheramplifies the intensity signal of the flame, which is then shaped and filtered before entering the microcontrollersystem. The real-time intensity of the flame is compared with the set intensity threshold. When the real-timeintensity of the flame exceeds the set intensity threshold, it is judged as \"flame present\". The frequencysignal isan important basis for determining the presence of a flame. Only when the frequency signal is present andtheflame intensity signal indicates a 'flame present' status can it be determined that there is a flame in theboilerfurnace or burner.
Rendering of Internal View Installation Rendering of External ViewInstallation
Operating Principle
-08-
Product features
Compatible with IR, UV and visible spectrum, supporting full spectrum flame detection;
Multistage digital filters and advanced software filtering algorithms to improve reliability;
Integrated and split design to meet different needs;
Multi-CPU redundant design, making it safer;
Support the dynamic identification function of flame intensity and frequency characteristics;
8-digit high-brightness nixie tube display and 4 status indicators;
Multistage gain adjustment, which can adapt to flame environments of different intensities in a wide range;
Support analog (4~20) mA output, digital signal output and switch output;
Remote adjustment and setting of parameters by manual operator;
The non-contact button design allows for operation without opening the cover in explosion-proofenvironments, thereby enhancing safety;
Wide power supply voltage design, 18VDC~36VDC, with anti-reverse connection function;
Periodic self-test function, used to detect the status of photosensitive sensor and I/O signal communicationmodule in real time;
Power supply and communication are fully lightning-proof;
Ambient temperature (-40~75)℃;
EMC (electromagnetic compatibility) design;
SIL2 Functional Safety Certification;
Protection class: IP66
Ex-marking: ExdbⅡCT6Gb
SelectionGuide-09-Product List
IFD-IR(UV)-111C
IFD-UV-111
IFD-IR-101CIFD-IR-011C IFD-UV-011 GFD-UV-422Ex
GFD-UV-412EX GFD-IR-112Ex SFD-IR-112Ex
FDS-2 Professional Flame
Detection and DebuggingSoftware
FDA-2 Portable Flame Detector
SFD-IR-112 SFD - 522(422)
Product List
-010-
Product Selection Guide
S/N Name
Sensor
type
Environmental
requirements
Model Applications
1
Intelligent
Integrated
Flame Detector
IR
Non-explosion
proof
IFD-IR-101C
Coal and oil are themainfuels
2
Explosion-proof
IFD-IR-011C Blast furnace gas is themain3 IFD-IR-111C fuel
4
UV
IFD-UV-011
Coke oven gas and natural gasare the main fuels
5 IFD-UV-111 (C)
6
Integrated
Flame Detector
Explosion-proof
GFD-UV-422Ex
7 GFD-UV-412Ex
8
IR
GFD-IR-112Ex
Blast furnace gas is themainfuel
9 Split Flame
Detection
Amplifier
Non-explosion
proof
SFD-522
Matched with SFD-IR-11210 SFD-422 (Ex)
11
Split Flame
Detector Probe
Non-explosion
proof
SFD-IR-112
Coal and oil are themainfuels
12 Explosion-proof SFD-IR-112Ex
Blast furnace gas is themainfuel
13
Flame
Detection
Manual
Operator
Non-explosion
proof
FDA-2
Matched with intelligent
integrated flame detector
14
Special
Software for
Flame
Detection
Upper
Computer
FDS-2
Models-11-Models
Intelligent Integrated Flame Detector
Conventional Integrated Flame Detector
Version C: band type; none: non-band type
Communication: 1=RS485; 2= MODBUS; 3=PROFIBUSFlameproof: 0=none; 1=Ex d II CT6 Gb
Display mode: 0=none; 1=digital display; 2=dot matrixdisplay;3=LCD
Detection principle: IR=infrared; UV=ultraviolet; VS=visiblespectrum; DS=dual sensor
Intelligent integrated
Ex: explosion-proof; none: non explosion-proof
Output mode: 0=passive contact; 1=current; 2=passivecontact+current
Shape: 1=long; 2=taper
Sensor: 1=indium gallium arsenic; 2=silicon photovoltaiccells;3=lead sulfide; 4=discharge tube
Detection principle: IR=infrared; UV=ultraviolet; VS=visiblespectrum
Conventional integrated
Models
-12-
Split Flame Detector
Intelligent Split Flame Detection Amplifier
Handheld flame detection debugger
Ex: explosion-proof; none: non explosion-proof
Signal output mode: 1=voltage; 2=current; 3=frequency, 4=digitalShape: 1=long; 2=cylindrical; 3=taper
Sensor: 1=indium gallium arsenic; 2=silicon photovoltaiccells;3=lead sulfide; 4=phototube
Detection principle: IR=infrared; UV=ultraviolet; VS=visiblespectrum
Split
Communication: 1=none; 2=RS485; 3= MODBUS; 4=PROFIBUS
Signal input mode: 1=digital; 2=current; 3=frequency; 4=voltage;5=current+frequency
Power supply type: 4=220VAC; 5=24VDC
Split
Version No.: 1=Version No.1, 2=Version No.2, and so onHandheld flame detection debugger
Product Introduction-13-IFD-IR(UV)-111C Flameproof Integrated Flame Detector
Features and Application Scenarios
The IFD-IR(UV)-111C flameproof integrated flame detector is a new type of intelligent flame detector withcommunication function. It is a new product independently developed by the Company by followingthedevelopment trend of the latest international flame detection products and accumulating years of experienceinproducing flame detection equipment and on-site debugging of flame detection equipment. Achieve touchscreenoperation without the need to open the cover throughout the entire process, making it safer and more reliable. It ismainly suitable for the detection site of boiler burner flame signals that primarily use fuel oil, blast furnacegas, and other fuels, requiring explosion-proof functionality. The IFD-IR(UV)-111C flameproof integrated flame detector is an intelligent IR flame detector basedonamicroprocessor, which combines the flame detection probe with a signal amplifier. This series of products hasthecharacteristics of beautiful appearance, reliable operation, small size, and strong functionality. In the design, corresponding measures are taken in both hardware and software design, taking into account the impact ofchanges in the nature of flame signals and the strength of flame signals in the furnace on the detector. Thisproduct can be interconnected with the FSSS system, or can be separately assembled into a flame detectionsystemthrough its own upper computer software. This series of products can easily replace imported flame detectorproducts and can also be used for upgrading traditional flame detector products. The IFD-IR(UV)-111C flameproof integrated flame detector is mainly suitable for the detection site of boilerburner flame signals primarily use blast furnace gas, fuel oil, and other fuels. It can be widely used in the burnersof small, medium, and large boilers in industries such as petroleum, chemical, metallurgy, and papermaking. Technical Performance Parameters
Operating environment conditions
Temperature: -40℃～+75℃
Relative humidity: 0%～95%, non-condensible;
Atmospheric pressure: 86kPa～108kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange
Wind pressure: appropriately exceed the pressure of furnace or air box. Technical parameters
Response wavelength: 850nm～1700nm (IFD-IR-111C); 210nm～370nm (IFD-UV-111C)
Input power supply: 24VDC±10%
Operating current: ≤200mADC
Power consumption: ≤5W
Electrical connection: direct connection with 12-core colored, flame-retardant, low-smoke andshieldedcable
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally closed and normally open)
Electric shock capacity: MAX: 3A, 250VAC (resistive load)
Product Introduction
-14-
Analog output: 4mA ～ 20mADC, maximum
connection load: 750Ω
Status display: 8-digit nixie tube and 4-digit LED
display
Keyboard input: 4-digit touch keyboard
Cable specification: 12-core colored, flame-retardant, low-smoke and shielded cable
Data communication: communication mode: RS485
(controllable)
Baud rate: adjustable
Communication distance: ≤1300m
Number of connected nodes: ≤128
Overall Dimensions and Wiring:
Overall dimensions: D (maximum diameter) x L
(length) Notes: 1. D=156mm;
2. For flangeless products, L=213.5mm;
3. For short flange products, L=236.5mm;
4. For long flange products, L=260.5mm. The shell material is metal die-casting aluminum, and the weight is ≤3kg. The appearance of IFD-IR(UV)-111C flameproof integrated flame detector is shown in Figure 1:
Product wiring
Terminal No. External cable color Wiring function
1 Black/red DC power input terminal+24VDC
2 White/blue DC power ground terminal (GND)
3 White/black Flame relay (normally open)
4 White/red Flame relay (normally open)
5 Red Alarm relay (normally open or normally closed)
6 Pink Alarm relay (normally open or normally closed)
7 Purple Current output (4～20) mADC (+)
8 Grey/red Current output (4～20) mADC (-)
9 Blue/red Shielding (+)
10 Yellow Shielding (-)
11 Black RS485 communication A (+)
12 Orange RS485 communication B (-)
Product Introduction-15-IFD-UV-111 Flameproof Integrated Flame Detector
Features and Application Scenarios
The IFD-UV-111 flameproof integrated flame detector is a new type of intelligent flame detector withcommunication function. It is a new product independently developed by the Company by followingthedevelopment trend of the latest international flame detection products and accumulating years of experienceinproducing flame detection equipment and on-site debugging of flame detection equipment. Achieve touchscreenoperation without the need to open the cover throughout the entire process, making it safer and more reliable. It ismainly suitable for the detection site of boiler burner flame signals that primarily use fuel oil, blast furnacegas, and other fuels, requiring explosion-proof functionality. The IFD-UV-111 flameproof integrated flame detector is an intelligent IR flame detector basedonamicroprocessor, which combines the flame detection probe with a signal amplifier. This series of products hasthecharacteristics of beautiful appearance, reliable operation, small size, and strong functionality. In the design, corresponding measures are taken in both hardware and software design, taking into account the impact ofchanges in the nature of flame signals and the strength of flame signals in the furnace on the detector. Thisproduct can be interconnected with
the FSSS system, or can be separately assembled into a flame detection system through its ownuppercomputer software. This series of products can easily replace imported flame detector products and canalsobeused for upgrading traditional flame detector products. The IFD-UV-111 flameproof integrated flame detector is mainly suitable for on-site detectionof flamesignals in boiler burners mainly fueled by natural gas, gas and coke oven gas, etc. It can be widely usedintheburners of small, medium, and large boilers in industries such as petroleum, chemical, metallurgy, andpapermaking. Technical Performance Parameters
Operating environment conditions
Temperature: -20℃～+60℃
Relative humidity: 0%～95%, non-condensible;
Atmospheric pressure: 86kPa～108kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange
Wind pressure: appropriately exceed the pressure of furnace or air box. Technical parameters
Response wavelength: 185nm～260nm;
Input power supply: 24VDC±10%
Operating current: ≤200mADC
Power consumption: ≤5W
Electrical connection: direct connection with 12-core colored, flame-retardant, low-smoke andshieldedcable
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally closed and normally open)
Electric shock capacity: MAX: 3A, 250VAC (resistive load)
Analog output: 4mA～20mADC, maximum connection load: 750Ω
Status display: 8-digit nixie tube and 4-digit LED display
Keyboard input: 4-digit touch keyboard
Product Introduction
-16-
Cable specification: 12-core colored, flame-retardant, low-smoke and shielded cable
Communication: communication mode: RS485 (controllable)
Baud rate: adjustable
Communication distance: ≤1300m
Number of connected nodes: ≤128
Overall Dimensions and Wiring:
Overall dimensions: D (maximum diameter) x L (length)
Notes: 1. D=156mm;
2. For flangeless products, L=213.5mm;
3. For short flange products, L=236.5mm;
4. For long flange products, L=260.5mm. The shell material is metal die-casting aluminum, and the weight is ≤3kg. The appearance of IFD-UV-111 flameproof integrated flame detector is shown in Figure 1:
Product wiring
Terminal No. External cable color Wiring function
1 Black/red DC power input terminal+24VDC
2 White/blue DC power ground terminal (GND)
3 White/black Flame relay (normally open)
4 White/red Flame relay (normally open)
5 Red Alarm relay (normally open or normally closed)
6 Pink Alarm relay (normally open or normally closed)
7 Purple Current output (4～20) mADC (+)
8 Grey/red Current output (4～20) mADC (-)
9 Blue/red Shielding (+)
10 Yellow Shielding (-)
11 Black RS485 communication A (+)
12 Orange RS485 communication B (-)
Product Introduction-17-IFD-IR-101C Intelligent Integrated Flame Detector
Features and Application Scenarios
The IFD-IR-101C intelligent integrated flame detector is an intelligent flame detector with communicationfunction. It is a product independently developed by the Company by following the development trendof thelatest international flame detection products and accumulating years of experience in producing flame detectionequipment and on-site debugging of flame detection equipment. It is mainly suitable for on-site detectionof flamesignals in boiler burners mainly fueled by coal and oil. It has the characteristics of beautiful appearance, reliableoperation, small size, and strong functionality. In the design, considering the influence of the nature andintensitychanges of the flame signal in the furnace on the detector, a fuzzy algorithm is adopted to improve the accuracyofflame detection discrimination. Special exterior structural design is adopted to significantly improve the product'sperformance in operating ambient temperature. This series of products features internal temperature detectionandalarm functions for monitoring working status. Additionally, it is equipped with continuously adjustablefrequency band settings, expanding the product's detection applicability range. Technical Performance Parameters
Operating environment conditions
Temperature: -40℃～+75℃
Relative humidity: 0%～95%, non-condensible
Atmospheric pressure: 86kPa～108kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box. Technical parameters
Response wavelength: 800nm～1700nm, Power supply: 24VDC±10%
Operating current: ≤200mADC
Electrical connection: 12-core, quick-connect rotating joint
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
Analog output: 4mA～20mADC
Status display: 8-digit nixie tube and 4-digit LED display
Keyboard input: 4-digit small button
Cable specification: 12-core colored, flame-retardant, low-smoke and shielded cable
Data communication: communication mode: RS485, adjustable baud rate. Communication distance: ≤1300m
Integrated structure and easy installation
Product Introduction
-18-
Protection class: IP66
Non explosion-proof
Overall Dimensions and Wiring:
Structural dimensions and appearance
a. Overall dimensions: h (maximum diameter) x b (length) =Φ121mm×228mm;
b. The shell material is metal die-casting aluminum, and the appearance is shown on the right figure:
Weight≤2Kg
Product wiring
The wiring terminal of the product (12-core) is connected to the external cable (colored 12-core) as describedin the table below:
Terminal
No. Pin numbers for aviation
plugs/sockets
External cable color Wiring function
1 A Black/red Power input+24VDC
2 B White/blue Power input ground terminal (GND)
3 C White/black Flame output terminal 1 (normallyopen)
4 D White/red Flame output terminal 2 (normallyopen)
5 E Red
Alarm output terminal 1 (normallyopenornormally closed)
6 F Pink
Alarm output terminal 2 (normallyopenornormally closed)
7 G Purple Current output 4～20mADC(+)
8 H Grey/red Current output 4～20mADC(-)
9 J Blue/red Shielding function (+)
10 K Yellow Shielding function (-)
11 L Black RS485 communication A(+)
12 M Tangerine RS485 communication B (-)
Product Introduction-19-IFD-IR (UV)-011C Flameproof Integrated Flame Detector
Features and Application Scenarios
The IFD-IR (UV)-011C flameproof integrated IR flame detector is new products with optical, mechanical
and electronic integration independently developed by the Company by following the development trendof thelatest international flame detection products and accumulating years of experience in producing flame detectionequipment and on-site debugging of flame detection equipment. This series of products is intelligent flamedetectors based on flame combustion models, which combines flame detection probes with signal amplifiersandhas RS485 communication functions. This series of products has the characteristics of beautiful appearance, reliable operation, small size, and strong functionality. It can be interconnected with the FSSS system, or canbeseparately assembled into a flame detection system through its own upper computer software. This seriesofproducts is suitable for various harsh working conditions and can easily replace imported flame detector productsand can also be used for upgrading traditional flame detector products. The IFD-IR(UV)-011Cflameproofintegrated IR flame detector is mainly suitable for the detection site of boiler burner flame signals primarilyusefuel oil, blast furnace gas, and other fuels. It can be widely used in the burners of small, medium, and large boilersin industries such as power, petroleum, chemical, metallurgy, and papermaking. Technical Performance Parameters
Operating environment conditions
Temperature: -40℃～+75℃
Relative humidity: 0%～95%, non-condensible
Atmospheric pressure: 86kPa～108kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box
Technical parameters
Response wavelength: 800nm～1700nm (IR)
200nm～370nm (UV)
Power supply: 24VDC±10%
Operating current: ≤200mADC
Electrical connection: direct connection with 12-core colored, flame-retardant, low-smoke andshieldedcable
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
Analog output: 4mA～20mADC
Power consumption: ≤5W
Integrated structure
Protection class: IP66
RS485 communication, convenient for remote debugging, communication distance: ≤1300m Adjust parameters using upper computer platform software or FDA-2 manual controller. Explosion-proof: ExdIICT6Gb
Product Introduction
-20-
Overall Dimensions and Wiring:
a. Overall dimensions: D (maximum diameter) x L (length), the
appearance is shown in Figure 1:
Notes: 1. D=116mm;
2. For flangeless products, L=256mm;
3. For short flange products, L=304mm;
4. For long flange products, L=314mm. b. The shell material is metal die-casting aluminum, and the weight is
≤3kg.
Figure 1 Diagram of Appearance Dimensions of Flame Detectors
Product wiring
See Table 1 for (Colored 12-core) description:
Terminal No. External cable color Wiring function
1 Black/red DC power input terminal+24VDC
2 White/blue DC power ground terminal (GND)
3 White/black Flame relay (normally open)
4 White/red Flame relay (normally open)
5 Red Alarm relay (normally open or normally closed)
6 Pink Alarm relay (normally open or normally closed)
7 Purple Current output (4～20) mADC (+)
8 Grey/red Current output (4～20) mADC (-)
9 Blue/red Shielding (+)
10 Yellow Shielding (-)
11 Black RS485 communication A (+)
12 Orange RS485 communication B (-)
It is strictly forbidden to
open the cover with
electricity
Product Introduction-21-IFD-UV-011 Flameproof Integrated Flame Detector
Features and Application Scenarios
The IFD-UV-011 flameproof integrated UV flame detector is a new product with optical, mechanical andelectronic integration independently developed by our company by following the development trend of thelatest
international flame detection products and accumulating years of experience in producing flame detectionequipment and on-site debugging of flame detection equipment. This product is an intelligent flame detector based on the microprocessor, which combines flame detectionprobes with signal amplifiers and has RS485 communication functions. Using highly sensitive UVphotoelectricsensors to detect flame signals, it works reliably, has powerful functions, and has a beautiful appearance andsmall
size. In the design, a fuzzy algorithm is adopted to improve the accuracy of flame detection and discriminationconsidering the nature of flame signals in the furnace and the impact of changes in flame signal strengthonthedetector; with a special external structure design, the operating ambient temperature performance of the product isgreatly improved, and it can meet the requirements for various hazardous explosion-proof situations; it hasinternal temperature detection and alarm functions, which can achieve monitoring of operating conditions. Thisproduct can be interconnected with the FSSS system, or can be separately assembled into a flame detectionsystemthrough its own upper computer software. It can easily replace imported flame detector products and canalsobeused for upgrading traditional flame detector products. The IFD-UV-011 flameproof integrated UV flame detector is mainly suitable for on-site detectionof flamesignals in boiler burners mainly fueled by natural gas, torch gas and coke oven gas etc. It can be widelyusedinthe burners of small, medium, and large boilers in industries such as petroleum, chemical, metallurgy, andpapermaking. Technical Performance Parameters
Operating environment conditions
■ Temperature: -20℃～+60℃
■ Relative humidity: 0%～95%, non-condensible
■ Atmospheric pressure: 86kPa～108kPa
■ Cooling/purge air requirements:
■ Wind source: clean, dry and low temperature
■ Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. ■ Wind pressure: appropriately exceed the pressure of furnace or air box
Technical parameters
■ Response wavelength: 185nm～260nm (UV)
■ Power supply: 24VDC±10%
■ Operating current: ≤200mADC
■ Electrical connection: direct connection with 12-core colored, flame-retardant, low-smoke andshieldedcable
■ Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
■ Analog output: 4mA～20mADC, maximum connection load: 750Ω
■ Power consumption: ≤5W
■ Integrated structure
■ Protection class: IP66
■ RS485 communication, convenient for remote debugging, communication distance: ≤1300m
Product Introduction
-22-
■ Adjust parameters using upper computer platform software or FDA-2 manual controller. ■ Explosion-proof: ExdIICT6Gb
Overall Dimensions and Wiring:
a. Overall dimensions: D (maximum diameter) x L (length), the
appearance is shown in Figure 1: Notes: 1. D=116mm;
2. For flangeless products, L=256mm;
3. For short flange products, L=304mm;
4. For long flange products, L=314mm. b. The shell material is metal die-casting aluminum, and the weight is
≤3kg.
Figure 1 Diagram of Appearance Dimensions of Flame Detectors
Product wiring
See Table 1 for (Colored 12-core) description:
Terminal No. External cable color Wiring function
1 Black/red DC power input terminal+24VDC
2 White/blue DC power ground terminal (GND)
3 White/black Flame relay (normally open)
4 White/red Flame relay (normally open)
5 Red Alarm relay (normally open or normally closed)
6 Pink Alarm relay (normally open or normally closed)
7 Purple Current output (4～20) mADC (+)
8 Grey/red Current output (4～20) mADC (-)
9 Blue/red Shielding (+)
10 Yellow Shielding (-)
11 Black RS485 communication A (+)
12 Orange RS485 communication B (-)
It is strictly forbidden to
open the cover with
electricity
Product Introduction-23-GFD-UV-422Ex Flameproof Integrated UV Flame Detector
Features and Application Scenarios
The GFD-UV-422Ex flameproof integrated UV flame detector is an intelligent flame detector withflameproof function. It is a new product independently developed by our company based on customerrequirements and on-site actual needs, by optimizing the combination of flame detection probes andsignal
amplifiers. This product is powered by+24VDC and outputs switch and 4-20mADC current signal correspondingto flame intensity. This product has small size, low power consumption, strong functionality, reliable operation, and beautiful appearance. The GFD-UV-422Ex flameproof integrated UV flame detector is mainly suitable for on-site detectionofflame signals in boiler burners mainly fueled by natural gas, torch gas, coke oven gas, light oil, etc. Technical Performance Parameters
Operating environment conditions
Temperature: -20℃～+55℃
Relative humidity: 0%～95%, non-condensible;
Atmospheric pressure: 86kPa～106kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box. Technical parameters
Response wavelength: 185nm～260nm (UV)
Power supply: 24VDC±10%
Operating current: ≤130mADC
Electrical connection: 6-core flame-retardant, low-smoke and shielded cable
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
Analog output: 4mA～20mADC, maximum connection load: 750Ω
Power consumption: ≤2W
Integrated structure
Product Introduction
-24-
■ Protection class: IP66
■ Explosion-proof: ExdIICT6Gb
Overall Dimensions and Wiring:
The maximum overall dimensions of the product: h (maximum diameter) × b (length) = φ110mm×250mm;
The shell material is metal die-casting aluminum, weighing≤2kg, and the appearance is shown in Figure1:
Product wiring
S/N
Colors of the external
connecting cables
Wiring function
1 Red DC power input terminal+24VDC
2 Black DC power ground terminal (GND)
3 White Flame relay 1 (normally open)
4 Blue Flame relay 2 (normally open)
5 Yellow Current output (4～20) mADC (+)
6 Green Current output (4～20) mADC (-)
It is strictly
forbidden to open
the cover with
electricity
Product Introduction-25-GFD-UV-412Ex Flameproof Integrated UV Flame Detector
Features and Application Scenarios
The GFD-UV-412Ex flameproof integrated UV flame detector is a flame detector with flameproof anddisplay functions. This product is
powered by +24VDC and features a high-sensitivity UV flame sensor. It outputs a switch and a 4~20mADCcurrent signal corresponding to the flame intensity. This product has small size, low power consumption, strongfunctionality, reliable operation, and beautiful appearance. The GFD-UV-412Ex flameproof integrated UV flame detector is mainly suitable for on-site detectionofflame signals in boiler burners mainly fueled by natural gas, torch gas and coke oven gas etc. Technical Performance Parameters
Operating environment conditions
Temperature: -20℃～+55℃
Relative humidity: 0%～95%, non-condensible;
Atmospheric pressure: 86kPa～108kPa
Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box. Technical parameters
Response wavelength: 185nm～260nm
Power supply: 24VDC±10%
Operating current: ≤130mADC
Electrical connection: 6-core flame-retardant, low-smoke and shielded cable
Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
Analog output: 4mA～20mADC, maximum connection load: 750Ω
Power consumption: ≤3.5W
Display: light emitting diode (LED): power indicator (green) and flame indicator (red) switch
Cylindrical flat tube (red 10-digit): current analog
Integrated structure
Protection class: IP66
Explosion-proof: Ex d IIC T6 Gb
Product Introduction
-26-
Overall Dimensions and Wiring:
The maximum overall dimensions of the product: h (maximum diameter) × b (length) = φ110mm×250mm;
the shell material is metal die-casting aluminum, weighing≤2kg, and the appearance is shown in Figure 1:
Figure 1 Schematic Diagram of Product Appearance and Dimensions
Product wiring
S/N Colors of the external
connecting cables
Wiring function
1 Red DC power input terminal+24VDC
2 Black DC power ground terminal (GND)
3 White Flame relay 1 (normally open)
4 Blue Flame relay 2 (normally open)
5 Yellow Current output (4～20) mADC (+)
6 Green Current output (4～20) mADC (-)
Product Introduction-27-SFD-522 (422) Flame Detection Amplifier
(Matched with SFD-IR-112(Ex))
Features and Application Scenarios
The SFD series intelligent flame detecting amplifier is a new type of intelligent flame detectingamplifierbased on microprocessors. It is a new product developed by our company after years of experience in producingflame detection equipment and on-site debugging of flame detection equipment. The SFD series intelligent flamedetecting amplifier, when used in conjunction with split IR or UV probes, can be used for various boilersthat
require flame monitoring or fire protection. It is suitable for monitoring various flame signals of coal, fuel andgas. This product has the characteristics of beautiful appearance, reliable operation, small size, andstrongfunctionality. In the design, corresponding measures are taken in both hardware and software design, takingintoaccount the impact of changes in the nature of flame signals and the strength of flame signals in the furnaceontheamplifier. The SFD series intelligent flame detecting amplifier has the characteristics of easy on-site debugging, all Chinese LCD operation interface, and other user-friendly features, as well as RS485 remote communicationfunctions. Technical Performance Parameters
Operating environment conditions
■ Temperature: -10℃～+50℃
■ Relative humidity: 0%～95%, non-condensible
Technical parameters
■ Power supply:
SFD-522: 24VDC±10%, 5W
SFD-422: 220VAC±10%, 10W
■ Operating current: SFD-522: ≤200mA (DC)
SFD-422: ≤50mA (AC)
■ Relay output: flame relay, SPST (normally open)
Alarm relay, SPT (normally open)
Contact rating: 3A, 250VAC
■ Analog output: 4mA～20mADC
■ Status display: liquid crystal display (LCD) and
3-digit LED display
■ Keyboard input: 5-digit membrane button
■ Communication mode: RS485 (controllable)
Product Introduction
-28-
Overall Dimensions and Wiring:
Structural dimensions and appearance
Overall dimensions: L×W×H=188mm×65mm×139mm, As shown on the right figure:
Weight≤2Kg
Product wiring
The amplifier is equipped with two terminal blocks for connecting the split probe and the control system. SeeTable 1 for wiring instructions:
Table 1 Wiring Instructions for Amplifier Terminals
Terminal No. Wiring instructions
1 AC power input 220VAC-N
6 AC power input 220VAC-L
3 Current output 4-20mADC (+)
2 Current output 4-20mADC (-)
5 DC power input 24VDC (+)
4 DC power input 24VDC (-) (GND)
7, 8 Flame relay output
9, 10 Alarm relay output
11 RS485 common terminal
12 RS485 (+)
17 RS485 (-)
13, 18 Shielding
15 Flame signal ground (GND)
20 24VDC output connection probe
19 Probe flame signal input
14, 16 Dangling
Product Introduction-29-SFD-IR-112EX Split IR Flame Detector
(Matched with SFD-522 (422))
Features and Application Scenarios
The SFD-IR-112Ex flameproof split flame detection probe is a product developed by our companybasedonthe actual site needs and adopts high-temperature resistant and superior performance semiconductor sensors, making the SFD-IR-112Ex flameproof split flame detection probe have higher detection sensitivity andfasterdetection, more reliable working circuit, and stronger signal output ability. At the same time, a shell withflameproof function is also used in the external structure, which can meet the requirements for various hazardousflameproof situations. The SFD-IR-112Ex flameproof split flame detection probe is used in conjunctionwithourSFD-522 flame detection amplifier. It is suitable for various flame signals of fuel, blast furnace gas and coke oven gas, and works stablyandreliably for a long time. It can be widely used in the burners of small, medium, and large boilers in industries suchas metallurgy, chemical, and papermaking. Technical Performance Parameters
Operating environment conditions
■ Temperature: -40℃～+80℃
■ Relative humidity: 0%～95%, non-condensible
■ Atmospheric pressure: 86kPa～108kPa
■ Cooling/purge air requirements:
Wind source: clean, dry and low temperature
Flow rate: The required cold air flow rate is 25.5Nm3
/h, which is connected by G1\" threaded connectionon the mounting flange. Wind pressure: appropriately exceed the pressure of furnace or air box
Technical parameters
■ Response wavelength: 850nm～1700nm
■ Power supply: 24VDC±10%
■ Operating current: ≤25mADC
■ Electrical connection: direct connection with 4-core colored, flame-retardant, low-smoke andshieldedcable
■ Output current: (0～4)mA Irms
■ Cable specification: 4-core flame-retardant and shielded cable
■ Split structure
■ Protection class: IP66
■ Explosion-proof
■ Supporting amplifier model: SFD-522
Product Introduction
-30-
Overall Dimensions and Wiring:
Structural dimensions and appearance
a. Overall dimensions: h (maximum diameter) x b (length) =Φ110mm×297mm;
b. The shell material is metal die-casting aluminum, and the appearance is shown on the right figure:
Weight≤2Kg
Figure 1 Installation Dimensions of Flame Detection Probe
Product wiring
The flame detection probe is connected to the flame detection amplifier via a 4-core shielded cable. Theprobe receives power from the amplifier through the cable and sends the flame signal to the flame detectionamplifier. The connection between the flame detection probe and the amplifier is shown in the table below:
Cable color Wiring content Corresponding to SFD-522
Green Power input+24VDC Terminal No. of intelligent flame detectionamplifier
Shielding Shielding, cable shielding layer 20
Black Signal ground terminal
Blue Probe output signal 15
Red Dangling 19
Product Introduction-31-Installation requirements
Installation methods are divided into external viewing and internal viewing, as shown in Figures 2 and3:
1. 12-core cable 2. Integrated IR and UV flame detection; 3. Insulated joints; 4. Windowassembly; 5. Internal thread on both sides; 6. Three-way joint; 7. Internal thread on both sides; 8. Universal joint
Figure 2 Schematic Diagram of External Viewing Installation
1. 12-core cable 2. Integrated IR and UV flame detection; 3. Insulated joints; 4. Three-wayjoint; 5. Furnace wall installation pipe; 6. Optical fiber; 7. Furnace wall
Figure 3 Schematic Diagram of Internal Viewing Installation
Qualification Certificates
-32-
High-tech Enterprise
Certificate
Certificate
Beijing Far East Instrument Co., Ltd. Your \"IFD-IR-101 Integrated
Flame Detector\" won the Outstanding
Product Award of our Association in
2010. This certificate is hereby issued. China Instrument and Control Society September 2010 National Energy
Science and
Technology Progress
Award
Certificate
Utility Model Patent
Certificate Utility Model Patent
Certificate
Utility Model Patent
Certificate Utility Model Patent
Certificate Utility Model Patent
Certificate
QualificationCertificates-33-Certificate of Quality
Management System
Certification Certificate of Quality
Management System
Certification
Certificate of Occupational
Health and Safety Management System Certification
Certificate of Environmental
Management System
Certification Certificate of Environmental
Management System
Certification
Beijing Municipality
Independent Innovation
Product
Certificate
National Key New
Product
Certificate
Cert
ificat
e.
Qualification Certificates
-34-
Beijing Municipality Independent
Innovation Product
Beijing Far East Instrument Co., Ltd. To commend the units that have made outstanding contributions
to the progress of scientific and
technological innovation
in the mechanical
industry, this certificate is hereby awarded as an
encouragement.
Conformity
Certificate of
Explosion-proof Conformity Certificate of Explosion-proof
(Attached Sheet)
Conformity
Certificate of
Explosion-proo
f
Conformity
Certificate of
Explosion-proof
Conformity
Certificate of
Explosion-proof
Conformity
Certificate of
Explosion-proof
ApplicationCases-35-Hot Rolling Plant of an Iron and Steel Co., Ltd.
Application Cases
-36-
32 sets of IFD-IR-101C of an Iron and Steel Co., Ltd.
ApplicationCases-37-Cut into circles of boiler corners of a Thermal Power Co., Ltd. (6 layers of coal and 3 layers of oil): 4*9=36 sets of IFD-IR-101C
Application Cases
-38-
Two sets (600MW supercritical air cooling) * flame detection 3-layer of a ConstructionInvestment Power Generation Co., Ltd. (Coal flame detection 12 sets/layer+oil flame detection 12 sets/layer)/set=2*72=144IFD-IR-101C
ApplicationCases-39-Cut into circles of four corners of 3-layer of a Self-owned Power Plant of an IronandSteel
Company: 3*4=12 sets of IFD-IR-011C
Application Cases
-40-
A Self-owned Power Plant of an Iron and Steel Plant
configuration of cutting into circles of four cornersof boiler, each boiler: 16 sets of IFD-IR-111C
ApplicationCases-41-Incinerator application
Application of blast furnace hot blast
stove in metallurgical industryFlame detection type: explosion-proof integrated UV flame detection
Installation: external viewing
Application Cases
-42-
Boiler burner in metallurgical industry
Boiler furnace of self-owned power plant inmetallurgical industry
Flame detection type: explosion-proof integrated UV
flame detection
Installation method: front and rear walls, upper and
lower floors, external viewing type
Flame detection type: explosion-proof integratedUVflame detection
Installation: external viewing
ApplicationCases-43-Installation site of petrochemical industry
Application Cases
-44-
Installation site of coal chemical industry
ApplicationCases-45-Application of thermal power plant boiler
2*350MW power generation project
Flame detection type: IR split flame detection
Installation: internal viewing
Performance List
-46-
Performance Sheet of Flame Detection of Beijing Far East Instrument Co., Ltd.S/N User name
Project
scale
Industry Area Category1 Shandong Hualu-Hengsheng Chemical Co., Ltd. / Chemical
industry
Shandong
Flamedetectionsystem2 Shanxi Wenxi Fertilizer Plant / Chemical
industry
Shanxi
Flamedetectionsystem3 Lianfeng Iron and Steel Blast Furnace Renovation / Metallurgy Jiangsu
Flamedetectionsystem4 Chiping Xinfa Huayu Alumina Co., Ltd. / Metallurgy Shandong
Flamedetectionsystem5 Shandong Xinfa Chemical Co., Ltd. / Chemical
industry
Shandong
Flamedetectionsystem6 Chifeng Zhongtang Special Steel Hot Blast Stove
Project
/ Metallurgy
Inner
Mongolia
Flamedetectionsystem7 Mengxi New Energy / Metallurgy
Inner
Mongolia
Flamedetectionsystem8
Flame Detection Replacement and Renovation Project
of Power Station of Henan Hanye Iron and Steel Co., Ltd. / New energy Henan
Flamedetectionsystem9 Flame Detection Renovation Project of Jinxi Iron and
Steel Steelmaking Plant No.2
/ Metallurgy Tianjin
Flamedetectionsystem10 Guizhou Panjiang Power Investment Tianneng Coking
Co., Ltd. / Chemical
industry
Guizhou
Flamedetectionsystem11 Chiping Xinfa Huayu Alumina Co., Ltd. / Metallurgy Shandong
Flamedetectionsystem12 Xingtai Hengfeng Power Plant / Electric
power
Hebei
Flamedetectionsystem13 Comprehensive Utilization Power Generation Project
of Zenith Steel Group (Nantong) Company Limited
/ Electric
power
Jiangsu
Flamedetectionsystem14
Continued Construction of Gas Comprehensive
Utilization Thermal Power Construction Project of
Qingdao Runyi Clean Energy Co., Ltd. / Electric
power
Shandong
Flamedetectionsystem15
Flame Detection Project of 220MW Gas Furnace
Power Generation Project of Henan Anyang
(Zhoukou) Iron & Steel Group Co., Ltd. / Metallurgy Henan
Flamedetectionsystem16 Boiler of Guangxi Jingui Pulp & Paper Co., Ltd. / Papermaking Guangxi
Flamedetectionsystem17
Boiler Ignition Device of Gas Power Generation
Project of Hebei Donghai Special Steel Group Co., Ltd. / Metallurgy Hebei
Flamedetectionsystem18 Boiler Flame Detection Renovation of Dushanzi
Petrochemical Branch Power Plant
/ Chemical
industry
Xinjiang
Flamedetectionsystem
PerformanceList-47-19 Boiler Flame Detection Renovation of SDIC Xinjiang
Loubupo Potash Co., Ltd. / Chemical
industry
Xinjiang
Flamedetectionsystem20 Heat Furnace Flame Detection Renovation Project of
Yankuang Kelan Kaimei Special Chemical Co., Ltd. / Chemical
industry
Shandong
Flamedetectionsystem21 Renovation and Replacement of Spare Parts at Anfeng
Steel and Sintering Plant Area
/ Metallurgy Hebei
Flamedetectionsystem22 Flame Detection Upgrade of Xinjiang Guanghui New
Energy
/ New energy Xinjiang
Flamedetectionsystem23 Mengxi Energy Heating Furnace Flame Detection
Renovation
/ New energy
Inner
Mongolia
Flamedetectionsystem24 Guangdong Eacoon Energy Technology Co., Ltd. / 0EM Guangdong
Flamedetectionsystem25
150MW Subcritical Blast Furnace Gas Power
Generation Unit of Jiangsu Binxin Iron and Steel
Group Co., Ltd. / Metallurgy Jiangsu
Flamedetectionsystem26 Flame Detection Upgrade of Shaanxi Hengyuan Heat
and Power Co., Ltd. / Electric
power
Shaanxi
Flamedetectionsystem27 SINOPEC SABIC Tianjin Petrochemical Company
Limited
/ Chemical
industry
Tianjin
Flamedetectionsystem28 Boiler Flame Detector System of Hebei Jicheng New
Materials Co., Ltd. / Chemical
industry
Hebei
Flamedetectionsystem29
Clean Energy Comprehensive Utilization 2x135MW
Power Generation Project of Hamidun Runda Jianeng
Power Generation Co., Ltd. / Electric
power
Xinjiang
Flamedetectionsystem30 Xichang Steel-Vanadium Vanadium Products Branch / Metallurgy Gansu
Flamedetectionsystem31 Heating Furnace Renovation of Qinhuangdao Huarui
Coal Chemical Co., Ltd. / Chemical
industry
Hebei
Flamedetectionsystem32
Flame Detection System of 1X100MW Ultra-high
Temperature Subcritical Power Generation Project of
Hebei Anfeng Steel Group
/ Metallurgy Hebei
Flamedetectionsystem33 Gas Heating Furnace Flame Detection and Flameout
Protection of Shanxi Jinfeng Coal Chemical
/ Chemical
industry
Shanxi
Flamedetectionsystem34 Shanxi Jinnan Steel Group 1X135MW Unit / Metallurgy Shanxi
Flamedetectionsystem35 Flame Detection Spare Parts of Siping Thermal Power
Plant
/ Electric
power
Jilin
Flamedetectionsystem36 Heating Furnace Flame Detection Renovation of
Shandong Dongfang Hongye Chemical Co., Ltd. / Chemical
industry
Shandong
Flamedetectionsystem37
South Area Supporting Construction Gas Power
Generation Project of Pingshan County Jingye Coking
Co., Ltd. / Chemical
industry
Hebei
Flamedetectionsystem
Performance List
-48-
38
Hangzhou Boiler Shenmu County Hengdong Power
Generation Project
1*130T/h
Thermal
power
Shaan
xi
Flamedetectionsystem39
Bangladesh Barisal 2*350MW Coal-fired Boiler Flame
Detection System
2*350MW
Thermal
power
Abroa
d
Flamedetectionsystem40
Hangzhou Boiler Vietnam Gas-fired Boiler Flame
Detection Project
/
Thermal
power
Abroa
d
Flamedetectionsystem41
Turkey Hunutlu 2*660MW Coal-fired Boiler Flame
Detection System
2*660WM
Thermal
power
Abroa
d
Flamedetectionsystem42 Shandong Dongfang Hongye Chemical Co., Ltd. /
Chemica
l
industry
Shand
ong
Flamedetectionsystem43 Anyang (Zhoukou) Iron & Steel Group Co., Ltd. 2*210T/h
Metallur
gy
Henan
Flamedetectionsystem44
Tangshan Donghai Iron and Steel Group Special Steel
Co., Ltd. 2*220T/h
Metallur
gy
Hebei
Flamedetectionsystem45 Shanxi Jinfeng Coal Chemical Co., Ltd. A/B gas
making
and
blowing
Chemica
l
industry
Shanx
i
Flamedetectionsystem46
Beijing Jingcheng Ruida Electrical Engineering
Technology Co., Ltd. New blast
furnace
Sanden
Chemica
l
industry
Hebei
Flamedetectionsystem47 Hebei Anfeng Steel Group /
Metallur
gy
Hebei
Flamedetectionsystem48 Zenith Steel Group (Nantong) Company Limited /
Metallur
gy
Jiangs
u
Flamedetectionsystem49
Anhui Linhuan Coking Benzene Heating Furnace Flame
Detection Renovation
/
Chemica
l
industry
Anhui
Flamedetectionsystem50
Yanhua Phoenix Pavilion Project of Bayeco
Environmental Technology Co., Ltd. /
Chemica
l
industry
Beijin
g
Flamedetectionsystem51
Tail Gas Renovation Flame Detection and Ignition
System of Yunnan Jianglin Group Fifth Workshop
/
Chemica
l
industry
Yunna
n
Flamedetectionsystem52 Caustic Soda Flake Project of Chiping Xinfahua Huaxing / Chemica Shand Flame
PerformanceList-49-Chemical Co., Ltd. l
industry
ong detectionsystem53 Hebei Jinxi Steel Hot Blast Stove Project /
Metallur
gy
Hebei
Flamedetectionsystem54
Jiangsu General Flame Thermal Energy Technology Co., Ltd. /
Municip
al
Jiangs
u
Flamedetectionsystem55
Shenyang Thermal Power Plant Flame Detection System
of Beijing Zhongqi Tianxia Co., Ltd. 1*300MW
Thermoe
lectricity
Liaoni
ng
Flamedetectionsystem56 Shougang Group Wuyang Steel Flame Detection System /
Metallur
gy
Hebei
Flamedetectionsystem57 COFCO Biochemical Flame Detection System / Food
Flamedetectionsystem58
Flame Detection System Renovation of Shenmu
Hengsheng Coal Chemical Co., Ltd. /
Chemica
l
industry
Shaan
xi
Flamedetectionsystem59
Heating Furnace Flame Detection System Renovation of
Xinjiang Guanghui New Energy Co., Ltd. /
Chemica
l
industry
Xinjia
ng
Flamedetectionsystem60
Flame Detection Project of Shandong Hualu-Hengsheng
Chemical Co., Ltd. /
Chemica
l
industry
Shand
ong
Flamedetectionsystem61
Flame Detection System Project of Rizhao Steel Holding
Group Co., Ltd. 1*220T/h
Metallur
gy
Shand
ong
Flamedetectionsystem62
Flame Detection System Renovation Project for Shenmu
Clean Energy Comprehensive Utilization Power
Generation Co., Ltd. /
Thermal
power
Shaan
xi
Flamedetectionsystem63 Vietnam Coastal Phase II 2*660MW Project 2*660MW
Thermal
power
Abroa
d
Flamedetectionsystem64
Renovation Project of 3*130T/h Medium-Temperature
and Medium-Pressure Coal Gas Hybrid Boilers of
Anyang Iron & Steel Group Co., Ltd. 3*130T/h
Metallur
gy
Henan
Flamedetectionsystem65
Ultra-High Temperature Subcritical Boiler Project of
Hebei Zhongzhong Taide Energy-saving Technology
Co., Ltd. 1x110MW
Metallur
gy
Hebei
Flamedetectionsystem66
Power Plant Boiler Renovation of Shanxi Xinfa
Chemical Co., Ltd. /
Chemica
l
industry
Shanx
i
Flamedetectionsystem67 Lime Kiln Flame Detection System Renovation Project / New Shand Flame
Performance List
-50-
of Liaocheng Yanju New Materials Co., Ltd. material ong detectionsystem68
Boiler Flame Detection System Renovation Project of
Jinneng Changzhi Thermal Power Co., Ltd. 1*300MW
Thermoe
lectricity
Shanx
i
Flamedetectionsystem69 Ningxia Dahua One-Stage Furnace Cofiring Project 1*130T/h
Chemica
l
industry
Ningx
ia
Flamedetectionsystem70
Ukraine Sintering Flame Detection System of Zhongye
Changtian International Engineering Co., Ltd. /
Metallur
gy
Abroa
d
Flamedetectionsystem71
Tail Gas Power Plant Maintenance of Shaanxi Shuangyi
Coal Chemical Technology Industrial Co., Ltd. /
Chemica
l
industry
Shaan
xi
Flamedetectionsystem72
Flame Detection System Renovation of Henan Shangqiu
Thermal Power Co., Ltd. 1*200MW
Thermoe
lectricity
Henan
Flamedetectionsystem73
Flame Detection System Renovation of Jiangxi Electric
Power Co., Ltd. Nanchang Power Plant
/
Thermal
power
Jiangx
i
Flamedetectionsystem74
Shanghai Electric Xinjiang Hami Gas Flame Detection
System
/
Thermal
power
Xinjia
ng
Flamedetectionsystem75
Flame Detection Renovation Project of Xinjiang
Guanghui New Energy Co., Ltd. /
Chemica
l
industry
Xinjia
ng
Flamedetectionsystem
