Spherical Roller Bearings

230 Series

Tapered & Straight Bores

Taper Bore

Bearing

Part No.

*

Straight Bore

Bearing

Part No.

*

Dimensions (mm)

Basic Load Ratings

in kN Max. rpm Weight

kg Dynamic Static

d D B

d1* B1 C C0 Grease Oil Bearing Sleeve mm in

23024K 23024 120 180 46 110 4-3/16, 4-1/4 72 300 500 2000 2800 3.9 2.0

23026K 23026 130 200 52 115 4-7/16, 4-1/2 80 370 600 1900 2600 5.6 2.9

23028K 23028 140 210 53 125 4-15/16, 5 82 395 675 1800 2400 6.0 3.2

23030K 23030 150 225 56 135 5-3/16, 5-1/4 87 435 745 1700 2200 7.3 3.9

23032K 23032 160 240 60 140 5-7/16, 5-1/2 93 500 870 1700 2200 8.9 5.2

23034K 23034 170 260 67 150 5-15/16, 6 101 620 1050 1600 2000 12.1 6.0

23036K 23036 180 280 74 160 6-7/16, 6-1/2 109 720 1240 1400 1800 15.8 6.9

23038K 23038 190 290 75 170 6-15/16, 7 112 750 1340 1300 1700 16.8 7.5

23040K 23040 200 310 82 180 7-3/16 120 875 1525 1200 1600 21.5 9.2

23044K 23044 220 340 90 200 7-15/16, 8 126 1040 1850 1100 1400 31.0 10.5

23048K 23048 240 360 92 220 8-7/16, 9 133 1125 2075 1000 1300 33.9 13.0

23052K 23052 260 400 104 240 9-7/16, 9-1/2 145 1400 2500 800 1100 49.0 16.0

23056K 23056 280 420 106 260 9-15/16, 10-1/2 152 1500 2800 800 1000 52.5 17.7

23060K 23060 300 460 118 280 10-15/16, 11 168 1890 3500 720 940 70.0 22.8

23064K 23064 320 480 121 300 11-7/16, 12 171 1960 3850 680 880 77 24.6

23068K 23068 340 520 133 320 12-7/16, 12-1/2 187 2310 4550 630 820 100 28.7

23072K 23072 360 540 134 340 12-15/16, 13-1/2 188 2370 4700 590 770 110 30.5

23076K 23076 380 560 135 360 13-15/16, 14 193 2500 5150 550 720 115 35.8

23080K 23080 400 600 148 380 15 210 2980 6050 520 680 140 41.3

23084K 23084 420 620 150 400 15-3/4 212 3100 6400 490 640 150 43.7

23088K 23088 440 650 157 410 16-1/2 228 3300 6850 470 610 175 65.2

23092K 23092 460 680 163 430 17 234 3600 7450 450 580 200 69.5

23096K 23096 480 700 165 450 18 237 3650 770 420 550 210 73.3

*Note: Part No. Suffix C3W33 (C3 = Internal Clearance, W33 = Lube Groove) will be provided unless otherwise specified.

K = Taper Bore, without K = straight bore. For Taper Bore (K) bearings, use the H3000 Series adapters.

Tapered Bore

Adapter Mounted

Tapered Bore Straight Bore

Models Available

230 Series (Taper Bores use H3000 or SNW Series Adapters)

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 295 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Spherical Roller Bearings

231 Series

Tapered & Straight Bores

*Note: Part No. Suffix C3W33 (C3 = Internal Clearance, W33 = Lube Groove) will be provided unless otherwise specified.

K = Taper Bore, without K = straight bore. For Taper Bore (K) bearings, use the H3100 Series adapters.

Taper Bore

Bearing

Part No.

*

Straight Bore

Bearing

Part No.

*

Dimensions (mm)

Basic Load Ratings

in kN Max. rpm Weight

kg Dynamic Static

d D B

d1* B1 C C0 Grease Oil Bearing Sleeve mm in

23134K 23134 170 280 88 150 5-15/16, 6 122 890 1490 1200 1600 20.6 8.4

23136K 23136 180 300 96 160 6-7/16, 6-1/2 131 1040 1750 1100 1500 25.9 9.5

23138K 23138 190 320 104 170 6-15/16, 7 141 1200 2050 1000 1400 32.6 11.0

23140K 23140 200 340 112 180 7-3/16 150 1350 2350 900 1200 42.7 12.0

23144K 23144 220 370 120 200 7-15/16, 8 161 1550 2700 850 1100 54.4 15.0

23148K 23148 240 400 128 220 8-7/16, 9 172 1750 3100 800 1050 66.4 18.0

23152K 23152 260 440 144 240 9-7/16, 9-1/2 190 2200 3800 730 800 92.9 22.5

23156K 23156 280 460 146 260 9-15/16, 10-1/2 195 2250 4200 650 700 99.5 25.0

23160K 23160 300 500 160 280 10-15/16, 11 208 2800 5000 600 750 130.0 30.0

23164K 23164 320 540 176 300 11-7/16, 12 226 3200 5900 550 700 171.0 35.0

23168K 23168 340 580 190 320 12-7/16, 12-1/2 254 3600 6600 520 680 210 49.5

23172K 23172 360 600 192 340 12-15/16, 13-1/2 259 3750 7050 490 630 215 54.2

23176K 23176 380 620 194 360 13-15/16, 14 264 3900 7500 450 590 230 61.7

23180K 23180 400 650 200 380 15 272 4200 8050 430 560 265 70.6

23184K 23184 420 700 224 400 15-3/4 304 5200 9950 410 530 350 84.2

23188K 23188 440 720 226 410 16-1/2 307 5200 10000 390 500 355 104.0

23192K 23192 460 760 240 430 17 326 5700 11400 360 470 435 116.0

23196K 23196 480 790 248 450 18 335 6200 12300 350 450 480 133.0

Tapered Bore

Adapter Mounted

Tapered Bore Straight Bore

Models Available

231 Series (Taper Bores use H3100 or SNW Series Adapters)

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 296 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Spherical Roller Bearings

232 Series

Tapered & Straight Bores

Taper Bore

Bearing

Part No.

*

Straight Bore

Bearing

Part No.

*

Dimensions (mm)

Basic Load Ratings

in kN Max. rpm Weight

kg Dynamic Static

d D B

d1* B1 C C0 Grease Oil Bearing Sleeve mm in

23234K 23234 170 310 110 150 5-15/16, 6 154 1190 1900 900 1200 36 10.2

23236K 23236 180 320 112 160 6-7/16 161 1290 2100 850 1100 37 11.3

23238K 23238 190 340 120 170 6-15/16 169 1440 2350 800 1100 46 12.6

23240K 23240 200 360 128 180 7-3/16 176 1660 2750 750 1000 56 14.0

23244K 23244 220 400 144 200 7-15/16, 8 183 2020 3390 670 900 79 17.0

23248K 23248 240 440 160 220 9 196 2440 4040 630 800 105 20.0

23252K 23252 260 480 174 240 9-7/16, 9-1/2 208 2760 4700 560 750 135 21.0

23256K 23256 280 500 176 260 9-15/16, 10-1/2 221 2930 5150 530 670 145 27.0

23260K 23260 300 540 192 280 10-15/16, 11 240 3450 6000 480 630 190 34.1

23264K 23264 320 580 208 300 11-7/16, 12 258 4000 7050 450 600 240 39.3

23268K 23268 340 620 224 320 12-7/16, 12-1/2 288 4450 8000 400 530 295 54.6

23272K 23272 360 650 232 340 12-15/16, 13-1/2 299 4850 8700 380 500 335 60.6

23276K 23276 380 680 240 360 13-15/16, 14 310 5200 9650 360 480 375 69.6

23280K 23280 400 720 256 380 15 328 5850 10600 340 450 450 75.2

23284K 23284 420 760 272 400 15-3/4 352 6550 12000 320 430 535 94.0

23288K 23288 440 790 280 410 16-1/2 361 6900 12800 300 400 590 118.0

23292K 23292 460 830 296 430 17 382 7750 14500 280 380 690 132.0

23296K 23296 480 870 310 450 18 397 8300 15500 260 360 790 152.0

*Note:

Tapered Bore

Adapter Mounted

Tapered Bore Straight Bore

Part No. Suffix C3W33 (C3 = Internal Clearance, W33 = Lube Groove) will be provided unless otherwise specified. K = Taper

Bore, without K = straight bore. For Taper Bore (K) bearings, use theOH3200 Series adapters.

232 Series (Taper Bores use OH3200 or SNP Series Adapters)

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 297 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Interchange

H-Type SNW Type

H204 x 17MM H204 —

H205 x 3/4 HE205 —

H205 x 20MM H205 —

H206 x 1 HE206 —

H206 x 25MM H206 —

H207 x 30MM H207 —

H208 x 1-1/4 HE208 —

H208 x 35MM H208 —

H209 x 1-1/2 HE209 —

H209 x 40MM H209 —

H210 x 1-3/4 HE210 —

H210 x 45MM H210 —

H211 x 2 HE211 —

H211 x 50MM H211 —

H212 x 55MM H212 —

H213 x 2-1/4 HE213 —

H213 x 60MM H213 —

H215 x 2-1/2 HE215 —

H215 x 65MM H215 —

H216 x 2-3/4 HE216 —

H216 x 70MM H216 —

H217 x 3 HE217 —

H217 x 75MM H217 —

H218 x 3-1/4 HE218 —

H218 x 80MM H218 —

H219 x 85MM H219 —

H220 x 3-1/2 HE220 —

H220 x 90MM H220 —

H222 x 4 HE222 —

H222 x 100MM H222 —

H304 x 5/8 HS304 —

H304 x 17MM H304 —

H305 x 1-1/16 HA305 —

H305 x 3/4 HE305 SNW05 x 3/4

H305 x 20MM H305 —

H306 x 15/16 HA306 SNW06 x 15/16

H306 x 1 HE306 SNW06 x 1

H306 x 25MM H306 —

H307 x 1-1/16 HA307 SNW07 x 1-1/16

H307 x 1-1/8 HS307 SNW07 x 1-1/8

H307 x 1-3/16 HA307 SNW07 x 1-3/16

H307 x 1-1/4 HE307 SNW07 x 1-1/4

H307 x 30MM H307 —

H308 x 1-1/4 HE308 SNW08 x 1-1/4

H308 x 1-5/16 HA208 SNW08 x 1-5/16

H308 x 1-3/8 HS308 SNW08 x 1-3/8

H308 x 35MM H308 —

H309 x 1-3/8 — SNW09 x 1-3/8

H309 x 1-7/16 HA309 SNW09 x 1-7/16

H309 x 1-1/2 HE309 SNW09 x 1-1/2

H309 x 40MM H309 —

H310 x 1-5/8 HS310 SNW10 x 1-5/8

H310 x 1-11/16 HA310 SNW10 x 1-11/16

H310 x 1-3/4 HE310 SNW10 x 1-3/4

H310 x 45MM H310 —

H311 x 1-3/4 HE311 SNW11 x 1-3/4

H311 x 1-7/8 HS311 SNW11 x 1-7/8

H311 x 1-15/16 HA311 SNW11 x 1-15/16

H311 x 2 HE311 SNW11 x 2

H311 x 50MM H311 —

H-Type SNW Type

H312 x 2 HE312 SNW12 x 2

H312 x 2-1/16 HA312 SNW12 x 2-1/16

H312 x 2-1/8 HS312 SNW12 x 2-1/8

H312 x 55MM H312 —

H313 x 2 HE313 SNW13 x 2

H313 x 2-1/8 HS313 SNW13 x 2-1/8

H313 x 2-3/16 HA313 SNW13 x 2-3/16

H313 x 2-1/4 HE313 SNW13 x 2-1/4

H313 x 2-5/16 HA313 SNW13 x 2-5/16

H313 x 60MM H313 —

H314 x 2-5/16 HA314 SNW14 x 2-5/16

H314 x 60MM H314 —

H315 x 2-3/8 HS315 SNW15 x 2-3/8

H315 x 2-7/16 HA315 SNW15 x 2-7/16

H315 x 2-1/2 HE315 SNW15 x 2-1/2

H315 x 65MM H315 —

H316 x 2-11/16 HA316 SNW16 x 2-11/16

H316 x 2-3/4 HE316 SNW16 x 2-3/4

H316 x 70MM H316 —

H317 x 2-15/16 HA317 SNW17 x 2-15/16

H317 x 3 HE317 SNW17 x 3

H317 x 75MM H317 —

H318 x 3-1/8 HS318 SNW18 x 3-1/8

H318 x 3-3/16 HA318 SNW18 x 3-3/16

H318 x 3-1/4 HE318 SNW18 x 3-1/4

H318 x 80MM H318 —

H319 x 3-3/16 HA319 SNW19 x 3-3/16

H319 x 3-1/4 HE319 SNW19 x 3-1/4

H319 x 3-3/8 HS319 SNW19 x 3-3/8

H319 x 85MM H319 —

H320 x 3-7/16 HA320 SNW20 x 3-7/16

H320 x 3-1/2 HE320 SNW20 x 3-1/2

H320 x 90MM H320 —

H321 x 3-11/16 HA321 SNW21 x 3-11/16

H321 x 3-3/4 HE321 SNW21 x 3-3/4

H321 x 95MM H321 —

H322 x 3-15/16 HA322 SNW22 x 3-15/16

H322 x 4 HE322 SNW22 x 4

H322 x 100MM H322 —

H2305 x 3/4 HE2305 —

H2305 x 20MM H2305 —

H2306 x 7/8 — —

H2306 x 1-5/16 HA2306 —

H2306 x 1 HE2306 —

H2306 x 25MM H2306 —

H2307 x 1-1/8 HS2307 —

H2307 x 1-3/16 HA2307 —

H2307 x 30MM H2307 —

H2308 x 1-1/4 HE2308 SNW108 x 1-1/4

H2308 x 1-5/16 HA2308 SNW108 x 1-5/16

H2308 x 35MM H2308 —

H2309 x 1-7/16 HA2309 SNW109 x 1-7/16

H2309 x 1-1/2 HE2309 SNW109 x 1-1/2

H2309 x 40MM H2309 —

H2310 x 1-5/8 HS2310 SNW110 x 1-5/8

H2310 x 1-11/16 HA2310 SNW110 x 1-11/16

H2310 x 1-3/4 HE2310 SNW110 x 1-3/4

H2310 x 45MM H2310 —

H2311 x 1-7/8 HS2311 SNW111 x 1-7/8

H2311 x 1-15/16 HA2311 SNW111 x 1-15/16

H-Type SNW Type

H2311 x 2 HE2311 SNW111 x 2

H2311 x 50MM H2311 —

H2312 x 2-1/8 HS2312 SNW112 x 2-1/8

H2312 x 55MM H2312 —

H2313 x 2-3/16 HA2313 SNW113 x 2-3/16

H2313 x 2-1/4 HE2313 SNW113 x 2-1/4

H2313 x 2-3/8 HS2313 SNW113 x 2-3/8

H2313 x 60MM H2313 —

H2314 x 60MM H2314 —

H2315 x 2-7/16 HA2315 SNW115 x 2-7/16

H2315 x 2-1/2 HE2315 SNW115 x 2-1/2

H2315 x 2-5/8 HS2315 SNW115 x 2-5/8

H2315 x 65MM H2315 —

H2316 x 2-11/16 HA2316 SNW116 x 2-11/16

H2316 x 2-3/4 HE2316 SNW116 x 2-3/4

H2316 x 70MM H2316 —

H2317 x 2-15/16 HA2317 SNW117 x 2-15/16

H2317 x 3 HE2317 SNW117 x 3

H2317 x 75MM H2317 —

H2318 x 3-1/8 HS2318 SNW118 x 3-1/8

H2318 x 3-3/16 HA2318 SNW118 x 3-3/16

H2318 x 3-1/4 HE2318 SNW118 x 3-1/4

H2318 x 80MM H2318 —

H2319 x 3-1/4 HE2319 SNW119 x 3-1/4

H2319 x 85MM H2319 —

H2320 x 3-7/16 HA2320 SNW120 x 3-7/16

H2320 x 3-1/2 HE2320 SNW120 x 3-1/2

H2320 x 90MM H2320 —

H2321 x 95MM H2321 —

H2322 x 3-15/16 HA2322 SNW122 x 3-15/16

H2322 x 4 HE2322 SNW122 x 4

H2322 x 100MM H2322 —

H2324 x 4-3/16 HA2324 SNW124 x 4-3/16

H2324 x 4-1/4 HE2324 SNW124 x 4-1/4

H2324 x 110MM H2324 —

H2326 x 4-7/16 HA2326 SNW126 x 4-7/16

H2326 x 4-1/2 HE2326 SNW126 x 4-1/2

H2326 x 115MM H2326 —

H2328 x 4-15/16 HA2328 SNW128 x 4-15/16

H2328 x 5 HE2328 SNW128 x 5

H2328 x 125MM H2328 —

H2330 x 5-3/16 HA2330 SNW130 x 5-3/16

H2330 x 5-1/4 HE2330 SNW130 x 5-1/4

H2330 x 135MM H2330 —

H2332 x 5-7/16 HA2332 SNW132 x 5-7/16

H2332 x 5-1/2 HE2332 SNW132 x 5-1/2

H2332 x 140MM H2332 —

H2334 x 5-15/16 HA2334 SNW134 x 5-15/16

H2334 x 6 HE2334 SNW134 x 6

H2334 x 150MM H2334 —

H2336 x 6-7/16 HA2336 SNW136 x 6-7/16

H2336 x 6-1/2 HE2336 SNW136 x 6-1/2

H2336 x 160MM H2336 —

H2338 x 6-3/4 HE2338 —

H2338 x 6-15/16 HA2338 SNW138 x 6-15/16

H2338 x 7 — SNW138 x 7

H2338 x 170MM H2338 —

H2340 x 7 HE2340 SNW140 x 7

H2340 x 7-3/16 HA2340 SNW140 x 7-3/16

H2340 x 180MM H2340 —

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 298 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Interchange

H-Type SNW, SNP Type

H2344 x 7-15/16 — SNW144 x 7-15/16

H2344 x 200MM H2344 —

H2348 x 8-15/16 — SNP148 x 8-15/16

H2348 x 220MM H2348 —

H2352 x 9-7/16 — SNP152 x 9-7/16

H2352 x 240MM H2352 —

H2356 x 260MM H2356 —

H3024 x 4-3/16 HA3224 x 4-3/16 SNW3024 x 4-3/16

H3024 x 4-1/4 HE3024 x 4-1/4 SNW3024 x 4-1/4

H3024 x 110MM H3024 —

H3026 x 4-7/16 HA3026 x 4-7/16 SNW3026 x 4-7/16

H3026 x 4-1/2 HE3026 x 4-1/2 SNW3026 x 4-1/2

H3026 x 115MM H3026 —

H3028 x 4-15/16 HA3028 x 4-15/16 SNW3028 x 4-15/16

H3028 x 5 HE3028 x 5 SNW3028 x 5

H3028 x 125MM H3028 —

H3030 x 5-3/16 HA3030 x 5-3/16 SNW3030 x 5-3/16

H3030 x 5-1/4 HE3030 x 5-1/4 SNW3030 x 5-1/4

H3030 x 135MM H3030 —

H3032 x 5-7/16 HA3032 x 5-7/16 SNW3032 x 5-7/16

H3032 x 5-1/2 HE3032 x 5-1/2 SNW3032 x 5-1/2

H3032 x 140MM H3032 —

H3034 x 5-15/16 HA3034 x 5-15/16 SNW3034 x 5-15/16

H3034 x 6 HE3034 x 6 SNW3034 x 6

H3034 x 150MM H3034 —

H3036 x 6-7/16 HA3036 x 6-7/16 SNW3036 x 6-7/16

H3036 x 6-1/2 HE3036 x 6-1/2 SNW3036 x 6-1/2

H3036 x 160MM H3036 —

H3038 x 6-15/16 HA3028 SNW3038 x 6-15/16

H3038 x 170MM H3038 —

H3040 x 7-3/16 HA3040 x 7-3/16 SNW3040 x 7-3/16

H3040 x 180MM H3040 —

H3044 x 200MM H3044 —

H3044 x 7-15/16 HA3044 x 7-15/16 SNP3044 x 7-15/16

H3044 x 8 HE3044 x 8 SNP3044 x 8

H3048 x 220MM H3048 —

H3048 x 8-7/16 HA3048 x 8-7/16 SNP3048 x 8-7/16

H3048 x 8-1/2 HE3048 x 8-1/2 SNP3048 x 8-1/2

H3048 x 8-15/16 HA3048 x 8-15/16 SNP3048 x 8-15/16

H3048 x 9 HE3048 x 9 SNP3048 x 9

H3052 x 240MM H3052 —

H3052 x 9-7/16 HA3052 x 9-7/16 SNP3052 x 9-7/16

H3052 x 9-1/2 HE3052 x 9-1/2 SNP3052 x 9-1/2

H3056 x 260MM H3056 —

H3056 x 9-15/16 HA3056 x 9-15/16 SNP3056 x 9-15/16

H3056 x 10 HE3056 x 10 SNP3056 x 10

H3056 x 10-7/16 HA3056 x 10-7/16 SNP3056 x 10-7/16

H3056 x 10-1/2 HE3056 x 10-1/2 SNP3056 x 10-1/2

H3060 x 250MM H3060 —

H3060 x 10-15/16 HA3060 x 10-15/16 SNP3060 x 10-15/16

H3060 x 11 HE3060 x 11 SNP3060 x 11

H3064 x 300MM H3064 —

H3064 x 11-7/16 HA3064 x 11-7/16 SNP3064 x 11-7/16

H3064 x 11-1/2 HE3064 x 11-1/2 SNP3064 x 11-1/2

H3064 x 11-15/16 HA3064 x 11-15/16 SNP3064 x 11-15/16

H3064 x 12 HE3064 x 12 SNP3064 x 12

H3068 x 320MM H3064 —

H3068 x 12-7/16 HA3068 x 12-7/16 SNP3068 x 12-7/16

H3068 x 12-1/2 HE3068 x 12-1/2 SNP3068 x 12-1/2

H3072 x 340MM H3072 —

H3072 x 12-15/16 HA3072 x 12-15/16 SNP3072 x 12-15/16

H3072 x 13 HE3072 x 13 SNP3072 x 13

H3072 x 13-7/16 HA3072 x 13-7/16 SNP3072 x 13-7/16

H-Type SNW, SNP Type

H3072 x 13-1/2 HE3072 x 13-1/2 SNP3072 x 13-1/2

H3076 x 360MM H3076 —

H3076 x 13-15/16 HA3076 x 13-15/16 SNP3076 x 13-15/16

H3076 x 14 HE3076 x 14 SNP3076 x 14

H3080 x 380MM H3080 —

H3080 x 14-15/16 HA3080 x 14-15/16 SNP3080 x 14-15/16

H3080 x 15 HE3080 x 15 SNP3080 x 15

H3084 x 400MM H3084 —

H3084 x 15-3/4 HE3084 x 15-3/4 SNP3084 x 15-3/4

H3088 x 16-1/2 HE3088 x 16-1/2 SNP3088 x 16-1/2

H3092 x 17 HE3092 x 17 SNP3092 x 17

H3096 x 18 HE3096 x 18 SNP3096 x 18

H3120 x 3-7/16 HA3120 x 3-7/16 SNW3120 x 3-7/16

H3120 x 3-1/2 HE3120 x 3-1/2 SNW3120 x 3-1/2

H3120 x 90MM H3120 —

H3122 x 3-11/16 — SNW3122 x 3-11/16

H3122 x 3-15/16 HA3122 x 3-15/16 SNW3122 x 3-15/16

H3122 x 4 HE3122 x 4 SNW3122 x 4

H3122 x 100MM H3122 —

H3124 x 4-3/16 HA3124 x 4-3/16 SNW3124 x 4-3/16

H3124 x 4-1/4 HE3124 x 4-1/4 SNW3124 x 4-1/4

H3124 x 110MM H3124 —

H3126 x 4-7/16 HA3126 x 4-7/16 SNW3126 x 4-7/16

H3126 x 4-1/2 HE3126 x 4-1/2 SNW3126 x 4-1/2

H3126 x 115MM H3126 —

H3128 x 4-15/16 HA3128 x 4-15/16 SNW3128 x 4-15/16

H3128 x 5 HE3128 x 5 SNW3128 x 5

H3128 x 125MM H3128 —

H3130 x 5-3/16 HA3130 x 5-3/16 SNW3130 x 5-3/16

H3130 x 5-1/4 HE3130 x 5-1/4 SNW3130 x 5-1/4

H3130 x 135MM H3130 —

H3132 x 5-7/16 HA3132 x 5-7/16 SNW3132 x 5-7/16

H3132 x 5-1/2 HE3132 x 5-1/2 SNW3132 x 5-1/2

H3132 x 140MM H3132 —

H3134 x 5-15/16 HA3134 x 5-15/16 SNW3134 x 5-15/16

H3134 x 6 HE3134 x 6 SNW3134 x 6

H3134 x 150MM H3134 —

H3136 x 6-7/16 HA3136 x 6-7/16 SNW3136 x 6-7/16

H3136 x 6-1/2 HE3136 —

H3136 x 160MM H3136 —

H3138 x 6-15/16 HA3138 x 6-15/16 SNW3138 x 6-15/16

H3138 x 170MM H3138 —

H3140 x 7-3/16 HA3140 x 7-3/16 SNW3140 x 7-3/16

H3140 x 180MM H3140 —

H3144 x 7-15/16 HA3144 x 7-15/16 SNW3144 x 7-15/16

H3144 x 8 HE3144 x 8 SNW3144 x 8

H3144 x 200MM H3144 —

H3148 x 8-1/2 HE3148 x 8-1/2 SNP3148 x 8-1/2

H3148 x 220MM H3148 —

H3152 x 240MM H3152 —

H3152 x 9-7/16 H3152 x 9-7/16 SNP3152 x 9-7/16

H3152 x 9-1/2 HE3152 x 9-1/2 SNP3152 x 9-1/2

H3156 x 260MM H3156 —

H3156 x 9-15/16 HA3156 x 9-15/16 SNP3156 x 9-15/16

H3156 x 10 HE3156 x 10 SNP3156 x 10

H3156 x 10-7/16 HA3156 x 10-7/16 SNP3156 x 10-7/16

H3156 x 10-1/2 HE3156 x 10-1/2 SNP3156 x 10-1/2

H3160 x 280MM H3160 —

H3160 x 10-15/16 HA3160 x 10-15/16 SNP3160 x 10-15/16

H3160 x 11 HE3160 x 11 SNP3160 x 11

H-Type SNW, SNP Type

H3164 x 300MM H3164 —

H3164 x 11-7/16 HA3164 x 11-7/16 SNP3164 x 11-7/16

H3164 x 11-1/2 HE3164 x 11-1/2 SNP3164 x 11-1/2

H3164 x 11-15/16 H3164 x 11-15/16 SNP3164 x 11-15/16

H3164 x 12 HE3164 x 12 SNP3164 x 12

H3168 x 320MM H3168 —

H3168 x 12-7/16 HA3168 x 12-7/16 SNP3168 x 12-7/16

H3168 x 12-1/2 HE3168 x 12-1/2 SNP3168 x 12-1/2

H3172 x 340MM H3172 —

H3172 x 12-15/16 HA3172 x 12-15/16 SNP3172 x 12-15/16

H3172 x 13 HE3172 x 13 SNP3172 x 13

H3172 x 13-7/16 HA3172 x 13-7/16 SNP3172 x 13-7/16

H3172 x 13-1/2 HE3172 x 13-1/2 SNP3172 x 13-1/2

H3176 x 360MM H3176 —

H3176 x 13-15/16 HA3176 x 13-15/16 SNP3176 x 13-15/16

H3176 x 14 HE3176 x 14 SNP3176 x 14

H3180 x 380MM H3180 —

H3180 x 14-15/16 HA3180 x 14-15/16 SNP3180 x 14-15/16

H3180 x 15 HE3180 x 15 SNP3180 x 15

H3184 x 400MM H3184 —

H3184 x 15-3/4 HE3184 x 15-3/4 SNP3184 x 15-3/4

H3188 x 16-1/2 HE3188 x 16-1/2 SNP3188 x 16-1/2

H3192 x 17 HE3192 x 17 SNP3192 x 17

H3196 x 18 HE3196 x 18 SNP3196 x 18

H3252 x 240MM H3252 —

H3252 x 9-7/16 HA3252 x 9-7/16 SNP3252 x 9-7/16

H3252 x 9-1/2 HE3252 x 9-1/2 SNP3252 x 9-1/2

H3256 x 260MM H3256 —

H3256 x 9-15/16 HA3256 x 9-15/16 SNP3256 x 9-15/16

H3256 x 10 HE3256 x 10 SNP3256 x 10

H3256 x 10-7/16 HA3256 x 10-7/16 SNP3256 x 10-7/16

H3256 x 10-1/2 HE3256 x 10-1/2 SNP3256 x 10-1/2

H3260 x 280MM H3260 —

H3260 x 10-15/16 HA3260 x 10-15/16 SNP3260 x 10-15/16

H3260 x 11 HE3260 x 11 SNP3260 x 11

H3264 x 300MM H3264 —

H3264 x 11-7/16 HA3264 x 11-7/16 SNP3264 x 11-7/16

H3264 x 11-1/2 HE3264 x 11-1/2 SNP3264 x 11-1/2

H3264 x 11-15/16 HA3264 x 11-15/16 SNP3264 x 11-15/16

H3264 x 12 HE3264 x 12 SNP3264 x 12

H3268 x 320MM H3268 —

H3268 x 12-7/16 HA3268 x 12-7/16 SNP3268 x 12-7/16

H3268 x 12-1/2 HE3268 x 12-1/2 SNP3268 x 12-1/2

H3272 x 340MM H3272 —

H3272 x 12-15/16 HA3272 x 12-15/16 SNP3272 x 12-15/16

H3272 x 13 HE3272 x 13 SNP3272 x 13

H3272 x 13-7/16 HA3272 x 13-7/16 SNP3272 x 13-7/16

H3272 x 13-1/2 HE3272 x 13-1/2 SNP3272 x 13-1/2

H3276 x 360MM H3276 —

H3276 x 13-15/16 HA3276 x 13-15/16 SNP3276 x 13-15/16

H3276 x 14 HA3276 x 14 SNP3276 x 14

H3280 x 380MM H3280 —

H3280 x 14-15/16 HA3280 x 14-15/16 SNP3280 x 14-15/16

H3280 x 15 HE3280 x 15 SNP3280 x 15

H3284 x 400MM H3284 —

H3284 x 15-3/4 HE3284 x 15-3/4 SNP3284 x 15-3/4

H3288 x 16-1/2 HE3288 x 16-1/2 SNP3288 x 16-1/2

H3292 x 17 HE3292 x 17 SNP3292 x 17

H3296 x 18 HE3296 x 18 SNP3296 x 18

Note: SNW-Type adapters use N or AN nuts with

inch threads, H-Type adapters are interchangable

and use standard KM nuts with metric threads.

Both are industry standard.

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 299 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

SNW 00 Series

Inch Bores Part No. Dimension (in) Nut Lock

Washer

Weight

d1 L D c lb

SNW05 x 3/4 3/4 1.27 1.56 0.46 N05 W05 0.2

SNW05 x 11/16 11/16 1.27 1.56 0.46 N05 W05 0.3

SNW06 x 15/16 15/16 1.35 1.75 0.46 N06 W06 0.2

SNW06 x 1 1 1.35 1.75 0.46 N06 W06 0.2

SNW07 x 1-1/16 1-1/16 1.46 2.06 0.48 N07 W07 0.4

SNW07 x 1-1/8 1-1/8 1.46 2.06 0.48 N07 W07 0.3

SNW07 x 1-1/4 1-1/4 1.46 2.06 0.48 N07 W07 0.3

SNW07 x 1-3/16 1-3/16 1.46 2.06 0.48 N07 W07 0.3

SNW08 x 1-1/4 1-1/4 1.50 2.25 0.50 N08 W08 0.4

SNW08 x 1-3/8 1-3/8 1.50 2.25 0.50 N08 W08 0.4

SNW08 x 1-5/16 1-5/16 1.50 2.25 0.50 N08 W08 0.4

SNW09 x 1-3/8 1-3/8 1.58 2.53 0.50 N09 W09 0.6

SNW09 x 1-7/16 1-7/16 1.58 2.53 0.50 N09 W09 0.6

SNW09 x 1-1/2 1-1/2 1.58 2.53 0.50 N09 W09 0.6

SNW10 x 1-11/16 1-11/16 1.77 2.69 0.56 N10 W10 0.7

SNW10 x 1-5/8 1-5/8 1.77 2.69 0.56 N10 W10 0.7

SNW10 x 1-3/4 1-3/4 1.77 2.69 0.56 N10 W10 0.7

SNW11 x 1-13/16 1-13/16 1.85 2.97 0.56 N11 W11 0.8

SNW11 x 1-3/4 1-3/4 1.85 2.97 0.56 N11 W11 0.8

SNW11 x 1-7/8 1-7/8 1.85 2.97 0.56 N11 W11 0.8

SNW11 x 1-15/16 1-15/16 1.85 2.97 0.56 N11 W11 0.9

SNW11 x 2 2 1.85 2.97 0.56 N11 W11 0.9

SNW13 x 2 2 2.10 3.38 0.63 N13 W13 1.0

SNW13 x 2-3/16 2-3/16 2.10 3.38 0.63 N13 W13 1.4

SNW13 x 2-1/4 2-1/4 2.10 3.38 0.63 N13 W13 1.4

SNW13 x 2-5/16 2-5/16 2.10 3.38 0.63 N13 W13 1.3

SNW15 x 2-3/8 2-3/8 2.30 3.88 0.67 AN15 W15 2.4

SNW15 x 2-1/2 2-1/2 2.30 3.88 0.67 AN15 W15 2.3

SNW15 x 2-7/16 2-7/16 2.30 3.88 0.67 AN15 W15 2.2

SNW15 x 2-5/8 2-5/8 2.30 3.88 0.67 AN15 W15 2.2

SNW16 x 2-11/16 2-11/16 2.38 4.16 0.67 AN16 W16 2.4

SNW16 x 2-3/4 2-3/4 2.38 4.16 0.67 AN16 W16 2.4

SNW17 x 2-15/16 2-15/16 2.49 4.41 0.70 AN17 W17 2.9

SNW17 x 3 3 2.49 4.41 0.70 AN17 W17 2.9

SNW18 x 3-3/16 3 -3/16 2.65 4.66 0.78 AN18 W18 4.0

SNW18 x 3-1/4 3-1/4 2.49 4.66 0.78 AN18 W18 4.0

SNW20 x 3-7/16 3-7/16 2.87 5.19 0.84 AN20 W20 4.0

SNW20 x 3-1/2 3-1/2 2.87 5.19 0.84 AN20 W20 4.0

SNW22 x 3-11/16 3-11/16 3.21 5.72 0.91 AN22 W22 4.9

SNW22 x 3-15/16 3-15/16 3.21 5.72 0.91 AN22 W22 4.8

SNW22 x 4 4 3.21 5.72 0.91 AN22 W22 4.8

SNW24 x 4-3/16 4-3/16 3.47 6.13 0.94 AN24 W24 6.2

SNW24 x 4-1/4 4-1/4 3.47 6.13 0.94 AN24 W24 6.2

SNW26 x 4-7/16 4-7/16 3.76 6.75 1.00 AN26 W26 9.7

SNW26 x 4-1/2 4-1/2 3.76 6.75 1.00 AN26 W26 9.7

SNW28 x 4-7/8 4 7/8 3.98 7.09 1.06 AN28 W28 10.5

SNW28 x 4-15/16 4-15/16 3.98 7.09 1.06 AN28 W28 10.5

SNW28 x 5 5 3.98 7.09 1.06 AN28 W28 10.5

SNW30 x 5-3/16 5-3/16 4.24 7.69 1.13 AN30 W30 16.0

SNW30 x 5-1/4 5-1/4 4.24 7.69 1.13 AN30 W30 16.0

SNW32 x 5-7/16 5-7/16 4.58 8.06 1.19 AN32 W32 16.0

SNW32 x 5-1/2 5-1/2 4.58 8.06 1.19 AN32 W32 16.0

SNW32 x 5-3/4 5-3/4 4.58 8.06 1.19 AN32 W32 16.0

SNW34 x 5-15/16 5-15/16 4.85 8.66 1.22 AN34 W34 19.5

SNW34 x 6 6 4.85 8.66 1.22 AN34 W34 19.5

SNW36 x 6-7/16 6-7/16 5.04 9.06 1.25 AN36 W36 20.5

SNW36 x 6-1/2 6-1/2 5.04 9.06 1.25 AN36 W36 20.5

SNW38 x 6-15/16 6-15/16 5.26 9.47 1.28 AN38 W38 23.5

SNW38 x 7 7 5.26 9.47 1.28 AN38 W38 23.5

SNW40 x 7-3/16 7-3/16 5.48 9.84 1.34 AN40 W40 30.5

SNW40 x 7-3/8 7-3/8 5.48 9.84 1.34 AN40 W40 30.5

SNW44 x 7-1/2 7-1/2 5.90 11.00 1.41 AN44 W44 32.5

SNW44 x 7-7/8 7-7/8 5.90 11.00 1.41 AN44 W44 32.5

SNW44 x 7-15/16 7-15/16 5.90 11.00 1.41 AN44 W44 32.5

SNW44 x 8 8 5.90 11.00 1.41 AN44 W44 32.5

For 222 Series Spherical Bearings

(also used with 1200, 1300, and

2200 Series Ball Bearings).

With Nut and Washer

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 300 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

SNW100 Series

SNW3000 Series

Inch Bores

Part No. Dimension (in) Nut Lock

Washer

Weight

d lb 1 L D c

SNW109 x 1-7/16 1-7/16 2.13 2.53 0.50 N09 W09 0.7

SNW109 x 1-1/2 1-1/2 2.13 2.53 0.50 N09 W09 0.7

SNW110 x 1-11/16 1-11/16 2.39 2.69 0.56 N10 W10 0.9

SNW110 x 1-3/4 1-3/4 2.39 2.69 0.56 N10 W10 0.9

SNW111 x 1-7/8 1-7/8 2.52 2.97 0.56 N11 W11 0.9

SNW111 x 1-15/16 1-15/16 2.52 2.97 0.56 N11 W11 0.9

SNW111 x 2 2 2.52 2.97 0.56 N11 W11 0.9

SNW113 x 2-1/4 2-1/4 2.77 3.38 0.63 N13 W13 1.8

SNW113 x 2-3/16 2-3/16 2.77 3.38 0.63 N13 W13 1.8

SNW115 x 2-3/8 2-3/8 3.08 3.88 0.70 AN15 W15 3.0

SNW115 x 2-7/16 2-7/16 3.08 3.88 0.70 AN15 W15 3.0

SNW115 x 2-1/2 2-1/2 3.08 3.88 0.70 AN15 W15 3.0

SNW116 x 2-11/16 2-11/16 3.20 4.16 0.67 AN16 W16 3.2

SNW116 x 2-3/4 2-3/4 3.20 4.16 0.67 AN16 W16 3.2

SNW117 x 2-15/16 2-15/16 3.31 4.41 0.70 AN17 W17 3.4

SNW117 x 3 3 3.31 4.41 0.70 AN17 W17 3.4

SNW118 x 3-3/16 3-3/16 3.55 4.66 0.78 AN18 W18 4.0

SNW118 x 3-1/4 3-1/4 3.55 4.66 0.78 AN18 W18 4.0

SNW120 x 3-7/16 3-7/16 3.97 5.19 0.84 AN20 W20 6.3

SNW120 x 3-1/2 3-1/2 3.97 5.19 0.84 AN20 W20 6.3

SNW122 x 3-11/16 3-11/16 4.35 5.72 0.91 AN22 W22 6.5

SNW122 x 3-15/16 3-15/16 4.35 5.72 0.91 AN22 W22 6.5

SNW122 x 4 4 4.35 5.72 0.91 AN22 W22 6.5

SNW124 x 4-3/16 4-3/16 4.65 6.13 0.94 AN24 W24 7.8

SNW124 x 4-1/4 4-1/4 4.65 6.13 0.94 AN24 W24 7.8

SNW126 x 4-7/16 4-7/16 4.98 6.75 1.00 AN26 W26 12.5

SNW126 x 4-1/2 4-1/2 4.98 6.75 1.00 AN26 W26 12.5

SNW128 x 4-15/16 4-15/16 5.32 7.09 1.06 AN28 W28 13.0

SNW128 x 5 5 5.32 7.09 1.06 AN28 W28 13.0

SNW130 x 5-3/16 5-3/16 5.62 7.69 1.13 AN30 W30 18.0

SNW130 x 5-1/4 5-1/4 5.62 7.69 1.13 AN30 W30 18.0

SNW132 x 5-7/16 5-7/16 5.92 8.06 1.19 AN32 W32 18.0

SNW134 x 5-15/16 5-15/16 6.19 8.66 1.22 AN34 W34 21.0

SNW134 x 6 6 6.19 8.66 1.22 AN34 W34 21.0

SNW136 x 6-7/16 6-7/16 6.46 9.06 1.25 AN36 W36 20.5

SNW136 x 6-1/2 6-1/2 6.46 9.06 1.25 AN36 W36 20.5

SNW138 x 6-15/16 6-15/16 6.76 9.47 1.28 AN38 W38 28.0

SNW138 x 7 7 6.76 9.47 1.28 AN38 W38 28.0

SNW140 x 7-3/16 7-3/16 7.10 9.84 1.34 AN40 W40 35.5

SNW144 x 7-15/16 7-15/16 7.29 11.00 1.41 AN44 W44 46.5

SNW144 x 8 8 7.29 11.00 1.41 AN44 W44 46.5

SNW3024 x 4-3/16 4-3/16 2.95 5.69 0.94 N024 W024 6.2

SNW3026 x 4-7/16 4-7/16 3.24 6.13 1.00 N026 W026 7.5

SNW3026 x 4-1/2 4-1/2 3.24 6.13 1.00 N026 W026 7.5

SNW3028 x 4-15/16 4-15/16 3.34 6.50 1.06 N028 W028 8.5

SNW3028 x 5 5 3.34 6.50 1.06 N028 W028 8.5

SNW3030 x 5-3/16 5-3/16 3.49 7.13 1.13 N030 W030 9.8

SNW3030 x 5-1/4 5-1/4 3.49 7.13 1.13 N030 W030 9.8

SNW3032 x 5-7/16 5-7/16 3.71 7.50 1.19 N032 W032 12.0

SNW3034 x 5-15/16 5-15/16 4.02 7.88 1.22 N034 W034 13.5

SNW3034 x 6 6 4.02 7.88 1.22 N034 W034 13.5

SNW3036 x 6-7/16 6-7/16 4.34 8.25 1.25 N036 W036 15.0

SNW3036 x 6-1/2 6-1/2 4.34 8.25 1.25 N036 W036 15.0

SNW3038 x 6-15/16 6-15/16 4.41 8.69 1.28 N038 W038 17.0

SNW3038 x 7 7 4.41 8.69 1.28 N038 W038 17.0

SNW3040 x 7-3/16 7-3/16 4.75 9.44 1.34 N040 W040 19.5

SNW3044 x 7-15/16 7-15/16 5.13 10.25 1.38 N044 W044 24.5

SNW3044 x 8 8 5.13 10.25 1.38 N044 W044 24.5

For 223 and 232 Series

Spherical Bearings

For 230 Series Spherical

Bearings

With Nut and Washer

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 301 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

SNP 3000 Series

Inch Bores Part No. Dimension (in) Nut Lock

Washer

Weight.

d1 L D c C1 lb

SNP3048 x 8-7/16 8-7/16 5.43 11.44 1.70 2.17 N048 P48 31.0

SNP3048 x 8-1/2 8-1/2 5.43 11.44 1.70 2.17 N048 P48 31.0

SNP3048 x 8-15/16 8-15/16 5.43 11.44 1.70 2.17 N048 P48 32.0

SNP3048 x 9 9 5.43 11.44 1.70 2.17 N048 P48 32.0

SNP3052 x 9-7/16 9-7/16 6.02 12.19 1.77 2.17 N052 P52 41.0

SNP3052 x 9-1/2 9-1/2 6.02 12.19 1.77 2.17 N052 P52 40.0

SNP3056 x 9-15/16 9-15/16 6.19 13.00 1.86 2.33 N056 P56 47.0

SNP3056 x 10 10 6.19 13.00 1.86 2.33 N056 P56 46.0

SNP3056 x 10-7/16 10-7/16 6.19 13.00 1.86 2.33 N056 P56 45.0

SNP3056 x 10-1/2 10-1/2 6.19 13.00 1.86 2.33 N056 P56 45.0

SNP3060 x 10-15/16 10-15/16 6.73 14.19 1.97 2.44 N060 P60 59.0

SNP3060 x 11 11 6.73 14.19 1.97 2.44 N060 P60 59.0

SNP3064 x 11-1/2 11-1/2 6.95 15.00 2.06 2.57 N064 P64 66.0

SNP3064 x 12 12 6.95 15.00 2.06 2.57 N064 P64 66.0

SNP3068 x 12-7/16 12-7/16 7.54 15.75 2.19 2.70 N068 P68 78.0

SNP3068 x 12-1/2 12-1/2 7.54 15.75 2.19 2.70 N068 P68 78.0

SNP3072 x 13-7/16 13-7/16 7.58 16.50 2.19 2.70 N072 P72 86.0

SNP3076 x 13-15/16 13-15/16 7.74 17.75 2.41 2.96 N076 P76 95.0

SNP3076 x 14 14 7.74 17.75 2.41 2.96 N076 P76 95.0

SNP3080 x 15 15 8.41 18.50 2.56 3.11 N080 P80 100.0

SNP3084 x 15-3/4 15-3/4 8.50 19.31 2.56 3.11 N084 P84 105.0

SNP3088 x 16 16 8.98 20.47 2.36 3.03 N088 P88 143.0

SNP3088 x 16-1/2 16-1/2 8.98 20.47 2.36 3.03 N088 P88 143.0

SNP3092 x 17 17 9.21 21.26 2.36 3.03 N092 P92 153.0

SNP3096 x 18 18 9.33 22.05 2.36 3.03 N096 P96 161.0

SNP3500 x 18-1/2 18-1/2 9.72 22.83 2.68 3.21 N500 P500 180.0

For 230 Series Spherical Bearings

Spanner Wrenches

With Nut and Washer

Part No.

Fits

Metric

Locknut

Fits

Inch

Locknut

Dm

mm

F

mm

L

mm

S

mm

HN19 KM19 AN19 125 5 280 12.7

HN20 KM20 AN20 130 5 280 12.7

HN21 KM21 AN21 140 6 320 12.7

HN22 KM22 N022 / AN22 145 6 320 12.7

HN23 KM23 — 148 11 394 12.7

HN24 KM24 N024 / AN24 153 11 417 12.7

HN25 KM25 — 158 11 429 127

HN26 KM26 N026 / AN26 163 11 437 12.7

HN27 KM27 — 173 13 452 15.8

HN28 KM28 N028 / AN28 178 13 464 15.8

HN29 KM29 — 188 13 484 15.8

HN30 KM30 N030 / AN30 193 13 497 15.8

HN31 KM31 — 198 15 509 15.8

HN32/33 KM32/33 N032 / AN32 208 15 519 15.8

HN34 KM34 N034 / AN34 218 15 544 15.8

HN36 KM36 N036 / AN36 228 17 564 15.8

HN38 KM38 N038 / AN38 238 17 584 15.8

HN40 KM40 N040 / AN40 248 17 604 15.8

For 22-248mm Diameter Nuts

Note: C1 dimension is approximate.

Part No.

Fits

Metric

Locknut

Fits

Inch

Locknut

Dm

mm

F

mm

L

mm

S

mm

HN1 KM1 N01 22 2 100 4.7

HN2 KM2 N02 25 2.5 100 4.7

HN3 KM3 N03 28 2.5 100 4.7

HN4 KM4 N04 32 2.5 120 4.7

HN5 KM5 N05 38 3 150 4.7

HN6 KM6 N06 45 3.5 180 6.3

HN7 KM7 N07 52 3.5 180 6.3

HN8 KM8 N08 58 4 210 8

HN9 KM9 N09 65 4 210 8

HN10 KM10 N10 70 4 210 8

HN11 KM11 N11 75 4 210 8

HN12 KM12 N12 80 5 240 8

HN13 KM13 N13 85 5 240 8

HN14 KM14 N14 92 5 240 8

HN15 KM15 AN15 98 5 240 8

HN16 KM16 AN16 105 5 240 8

HN17 KM17 AN17 110 5 280 12.7

HN18 KM18 AN18 120 5 280 12.7

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 302 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

H200 Series

H3000 Series

Metric & Inch Bores

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm)

Nut

Lock

Washer

Weight

Part No. d1 Part No. d1 d L D c c1 kg

H204 17 — — — 20 24 32 7 — KM4 MB4 0.1

H205 20 H205 x 3/4 3/4 — 25 26 38 8 — KM5 MB5 0.1

H206 25 H206 x 1 1 — 30 27 45 8 — KM6 MB6 0.1

H207 30 H207 x 1-3/16 1-3/16 — 35 29 52 9 — KM7 MB7 0.1

H208 35 H208 x 1-1/4 1-1/4 — 40 31 58 10 — KM8 MB8 0.2

H209 40 H209 x 1-7/16 1-7/16 1-1/2 45 33 65 11 — KM9 MB9 0.2

H210 45 H210 x 1-11/16 1-11/16 1-3/4 50 35 70 12 — KM10 MB10 0.3

H211 50 H211 x 1-15/16 1-15/16 2 55 37 75 12 — KM11 MB22 0.3

H212 55 — — — 60 38 80 13 — KM12 MB12 0.4

H213 60 H213 x 2-3/16 2-3/16 2-1/4 65 40 85 14 — KM13 MB13 0.4

H214 60 — — — 70 41 92 14 — KM14 MB14 0.6

H215 65 H215 x 2-7/16 2-7/16 2-1/2 75 43 98 15 — KM15 MB15 0.7

H216 70 H216 x 2-11/16 2-11/16 2-3/4 80 46 105 17 — KM16 MB16 0.9

H217 75 H217 x 2-15/16 2-15/16 3 85 50 110 18 — KM17 MB17 1.0

H218 80 H218 x 3-3/16 3-3/16 — 90 52 120 18 — KM18 MB18 1.2

H219 85 H219 x 3-1/4 3-1/4 — 95 55 125 19 — KM19 MB19 1.3

H220 90 H220 x 3-7/16 3-7/16 3-1/2 100 58 130 20 — KM20 MB20 1.5

H221 95 — — — 105 60 140 20 — KM21 MB21 1.7

H222 100 H222 x 4 4 — 110 63 145 21 — KM22 MB22 1.9

H3000 Series

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm)

Nut

Lock

Washer

Weight

Part No. d1 Part No. d1 d L D c c1 kg

H3024 110 H3024 x 4-3/16 4-3/16 4-1/4 120 72 145 22 — KML24 MBL24 2.0

H3026 115 H3026 x 4-7/16 4-7/16 4-1/2 130 80 155 23 — KML26 MBL26 2.9

H3028 125 H3028 x 4-15/16 4-15/16 5 140 82 165 24 — KML28 MBL28 3.2

H3030 135 H3030 x 5-3/16 5-3/16 5-1/4 150 87 180 26 — KML30 MBL30 3.9

H3032 140 H3032 x 5-7/16 5-7/16 5-1/2 160 93 190 27.5 — KML32 MBL32 5.2

H3034 150 H3034 x 5-15/16 5-15/16 6 170 101 200 28.5 — KML34 MBL34 6.0

H3036 160 H3036 x 6-7/16 6-7/16 6-1/2 180 109 210 29.5 — KML36 MBL36 6.9

H3038 170 H3038 x 6-15/16 6-15/16 7 190 112 220 30.5 — KML38 MBL38 7.5

H3040 180 H3040 x 7-3/16 7-3/16 — 200 120 240 31.5 — KML40 MBL40 9.2

H3044 200 H3044 x 7-15/16 7-15/16 8 220 128 260 30 41 HM3044 MS3044 10.3

H3048 220 H3048 x 8-7/16 8-7/16 8-1/2, 8-15/16, 9 240 133 290 34 46 HM3048 MS3048 13.2

H3052 240 H3052 x 9-7/16 9-7/16 9-1/2 260 147 310 34 46 HM3052 MS3052 15.3

H3056 260 H3056 x 9-15/16 9-15/16 10, 10-7/16, 10-1/2 280 152 330 38 50 HM3056 MS3056 17.7

H3060 280 H3060 x 10-15/16 10-15/16 11 300 168 360 42 54 HM3060 MS3060 22.8

H3064 300 H3064 x 11-15/16 11-15/16 11-1/2, 12 320 171 380 42 55 HM3064 MS3064 24.6

H3068 320 H3068 x 12-1/2 12-1/2 12-7/16 340 187 400 45 58 HM3068 MS3068 28.7

H3072 340 H3072 x 12-15/16 12-15/16 13, 13-7/16 360 188 420 45 58 HM3072 MS3072 30.5

H3076 360 H3076 x 13-15/16 13-15/16 14 380 193 450 48 62 HM3076 MS3076 35.8

H3080 380 H3080 x 15 15 14-15/16 400 210 470 52 66 HM3080 MS3080 41.3

H3084 400 H3084 x 15-3/4 15-3/4 — 420 212 490 52 66 HM3084 MS3084 43.7

H3088 410 H3088 x 16-1/2 16-1/2 — 440 228 520 60 77 HM3088 MS3088 65.2

H3092 430 H3092 x 17 17 — 460 234 540 60 77 HM3092 MS3092 69.5

H3096 450 H3096 x 18 18 — 480 237 560 60 77 HM3096 MS3096 73.3

Note: Hydraulic Adapter sleeves are also available with oil ducts for hydraulic removal.

H200 Series

Sizes 44 and up

with locking clip

Sizes thru 40 with

nut and washer

For 200 and 230 Series

Spherical Bearings

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 303 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

H300 Series (for 222 Series Bearings)

H3100 Series (for 231 Series Bearings)

Metric & Inch Bores

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Nut Lock

Washer

Weight

Part No. d kg 1 Part No. d1 d L D c c1

H304 17 — — — 20 28 32 7 — KM4 MB4 0.1

H305 20 H305 x 3/4 3/4 11/16 25 29 38 8 — KM5 MB5 0.1

H306 25 H306 x 15/16 15/16 1 30 31 45 8 — KM6 MB6 0.1

H307 30 H307 x 1-3/16 1-3/16 1-1/8, 1-1/4 35 35 52 9 — KM7 MB7 0.1

H308 35 H308 x 1-1/4 1-1/4 — 40 36 58 10 — KM8 MB8 0.2

H309 40 H309 x 1-7/16‘ 1-7/16 1-1/2 45 39 65 11 — KM9 MB9 0.3

H310 45 H310 x 1-11/16 1-11/16 1-3/4 50 42 70 12 — KM10 MB10 0.3

H311 50 H311 x 1-15/16 1-15/16 2 55 45 75 12 — KM11 MB11 0.3

H312 55 H312 x 2-1/8 2-1/8 — 60 47 80 13 — KM12 MB12 0.4

H313 60 H313 x 2-3/16 2-3/16 2-1/4 65 50 85 14 — KM13 MB13 0.5

H314 60 H314 x 2-5/16 2-5/16 — 70 52 92 14 — KM14 MB14 0.7

H315 65 H315 x 2-7/16 2-7/16 2-1/2 75 55 98 15 — KM15 MB15 0.8

H316 70 H316 x 2-11/16 2-11/16 2-3/4 80 59 105 17 — KM16 MB16 1.0

H317 75 H317 x 2-15/16 2-15/16 3 85 63 110 18 — KM17 MB17 1.2

H318 80 H318 x 3-3/16 3-3/16 3-1/4 90 65 120 18 — KM18 MB18 1.4

H319 85 H319 x 3-5/16 3-5/16 3-3/8 95 68 125 19 — KM19 MB19 1.6

H320 90 H320 x 3-7/16 3-7/16 3-1/2 100 71 130 20 — KM20 MB20 1.7

H321 95 H321 x 3-11/16 3-11/16 3-3/4 105 74 140 20 — KM21 MB21 2.0

H322 100 H322 x 3-15/16 3-15/16 4 110 77 145 21 — KM22 MB22 2.2

H3100 Series

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Nut Lock

Washer

Weight

Part No. d kg 1 Part No. d1 d L D c c1

H3120 90 H3120 x 3-7/16 3-7/16 3-1/2 100 76 130 20 — KM20 MB20 1.8

H3122 100 H3122 x 3-15/16 3-15/16 4 110 81 145 21 — KM22 MB22 2.3

H3124 110 H3124 x 4-3/16 4-3/16 4-1/4 120 88 155 22 — KM24 MB24 2.7

H3126 115 H3126 x 4-7/16 4-7/16 4-1/2 130 92 165 23 — KM26 MB26 3.7

H3128 125 H3128 x 4-15/16 4-15/16 5 140 97 180 24 — KM28 MB28 4.4

H3130 135 H3130 x 5-3/16 5-3/16 5-1/4 150 111 195 26 — KM30 MB30 5.5

H3132 140 H3132 x 5-7/16 5-7/16 5-1/2 160 119 210 28 — KM32 MB32 7.7

H3134 150 H3134 x 5-15/16 5-15/16 6 170 122 220 29 — KM34 MB34 8.4

H3136 160 H3136 x 6-7/16 6-7/16 6-1/2 180 131 230 30 — KM36 MB36 9.5

H3138 170 H3138 x 6-15/16 6-15/16 7 190 141 240 31 — KM38 MB38 11.0

H3140 180 H3140 x 7-3/16 7-3/16 — 200 150 250 32 — KM40 MB40 12.0

H3144 200 H3144 x 7-15/16 7-15/16 8 220 161 280 32 44 HM3144 MS3144 14.7

H3148 220 H3148 x 8-1/2 8-1/2 — 240 172 300 34 46 HM3148 MS3148 17.3

H3152 240 H3152 x 9-1/2 9-1/2 9-7/16 260 190 330 36 49 HM3152 MS3152 22.0

H3156 260 H3156 x 10-7/16 10-7/16 10-1/2 280 195 350 38 51 HM3156 MS3156 24.5

H3160 280 H3160 x 11 11 10-15/16 300 208 380 40 53 HM3160 MS3160 30.2

H3164 300 H3164 x 11-1/2 11-1/2 11-7/16, 11-15/16, 12 320 226 400 42 56 HM3164 MS3164 34.9

H3168 320 H3168 x 12-1/2 12-1/2 12-7/16 340 254 440 55 72 HM3168 MS3168 49.5

H3172 340 H3172 x 13 13 12-15/16, 13-7/16, 13-1/2 360 259 460 58 75 HM3172 MS3172 54.2

H3176 360 H3176 x 14 14 13-15/16 380 264 490 60 77 HM3176 MS3176 61.7

H3180 380 H3180 x 15 15 14-15/16 400 272 520 62 82 HM3180 MS3180 70.6

H3184 400 H3184 x 15-3/4 15-3/4 — 420 304 540 70 90 HM3184 MS3184 84.2

H3188 410 H3188 x 16-1/2 16-1/2 — 440 307 560 70 90 HM3188 MS3188 104.0

H3192 430 H3192 x 17 17 — 460 326 580 75 95 HM3192 MS3192 116.0

H3196 450 H3196 x 18 18 — 480 335 620 75 95 HM3196 MS3196 133.0

Note: Hydraulic Adapter sleeves, from size OH3132 are also available with oil ducts for hydraulic removal.

H300 Series

Sizes 44 and up

with locking clip

Sizes thru 40 with

nut and washer

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 304 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

H2300 Series

For 223 Series Spherical Bearings

Metric & Inch Bores

Metric Bore Inch Bore Other Stock

Bores

Dimensions in mm Nut Lock

Washer

Weight

Part No. d kg 1 Part No. d L D c c1

H2304 17 — — 20 31 32 7 — KM4 MB4 0.1

H2305 20 H2305 x 3/4 — 25 35 38 8 — KM5 MB5 0.1

H2306 25 H2306 x 7/8 15/16, 1 30 38 45 8 — KM6 MB6 0.1

H2307 30 H2307 x 1-3/16 1-1/8 35 43 52 9 — KM7 MB7 0.2

H2308 35 H2308 x 1-1/4 1-3/8, 1-5/16 40 46 58 10 — KM8 MB8 0.2

H2309 40 H2309 x 1-7/16 1-1/2 45 50 65 11 — KM9 MB9 0.3

H2310 45 H2310 x 1-11/16 1-3/4 50 55 70 12 — KM10 MB10 0.4

H2311 50 H2311 x 1-7/8 1-15/16, 2 55 59 75 12 — KM11 MB11 0.4

H2312 55 H2312 x 2-1/8 — 60 62 80 13 — KM12 MB12 0.5

H2313 60 H2313 x 2-3/16 2-1/4, 2-3/8 65 65 85 14 — KM13 MB13 0.6

H2314 60 — — 70 68 92 14 — KM14 MB14 0.9

H2315 65 H2315 x 2-7/16 2-1/2, 2-5/8 75 73 98 15 — KM15 MB15 1.1

H2316 70 H2316 x 2-11/16 2-3/4 80 78 105 17 — KM16 MB16 1.3

H2317 75 H2317 x 2-15/16 3 85 82 110 18 — KM17 MB17 1.5

H2318 80 H2318 x 3-3/16 3-1/4 90 86 120 18 — KM18 MB18 1.7

H2319 85 H2319 x 3-1/4 — 95 90 125 19 — KM19 MB19 1.9

H2320 90 H2320 x 3-7/16 3-1/2 100 97 130 20 — KM20 MB20 2.2

H2321 95 — - 105 101 140 20 — KM21 MB21 2.5

H2322 100 H2322 x 3-15/16 4 110 105 145 21 — KM22 MB22 2.8

H2324 110 H2324 x 4-3/16 4-1/4 120 112 155 22 — KM24 MB24 3.2

H2326 115 H2326 x 4-7/16 4-1/2 130 121 165 23 — KM26 MB26 4.6

H2328 125 H2328 x 4-15/16 5 140 131 180 24 — KM28 MB28 5.5

H2330 135 H2330 x 5-3/16 5-1/4 150 139 195 26 — KM30 MB30 6.6

H2332 140 H2332 x 5-7/16 5-1/2 160 147 210 28 — KM32 MB32 9.2

H2334 150 H2334 x 5-15/16 6 170 154 220 29 — KM34 MB34 10.0

H2336 160 H2336 x 6-7/16 6-1/2, 7 180 161 230 30 — KM36 MB36 11.0

H2338 170 H2338 x 6-15/16 — 190 169 240 31 — KM38 MB38 12.5

H2340 180 H2340 x 7-3/16 — 200 176 250 32 — KM40 MB40 14.0

H2344 200 H2344 x 7-15/16 — 220 186 280 32 44 HM3144 MS3144 16.7

H2348 220 H2348 x 8-15/16 — 240 199 300 34 46 HM3148 MS3148 19.7

H2352 240 H2352 x 9-7/16 — 260 211 330 36 49 HM3152 MS3152 24.2

H2356 260 — — 280 224 350 38 51 HM3156 MS3156 27.8

Note: Hydraulic Adapter sleeves, from size OH2332 are also available with oil ducts on the outer and inner diameter for hydraulic

removal.

H2300 Series

Sizes 44 and up

with locking clip

Sizes thru 40 with

nut and washer

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 305 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Adapter Sleeves

H2300 & H3200 Series

Metric & Inch Bores

With Nut and Lock Plate

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Standard

Nut

Lock

Plate

Lock

Plate

Bolt

Weight

Part No. d kg 1 Part No. d1 d L D c c1

H2334 150 H2334 x 5-15/16 5-15/16 6 170 154 220 29 — K 34 MB34 — 10.2

H2336 160 H2336 x 6-7/16 6-7/16 — 180 161 230 30 — KM36 MB36 — 11.3

H2338 170 H2338 x 6-15/16 6-15/16 — 190 169 240 31 — KM38 MB38 — 12.6

H2340 180 H2340 x 7-3/16 7-3/16 — 200 176 250 32 — KM40 MB40 — 14

H2344 200 H2344 x 7-15/16 7-15/16 8 220 183 280 32 48 KM3144 MB3144 — 17

H2348 220 H2348 x 8-15/16 8-15/16 9 240 199 300 34 50 HM 3148 MS3148 M8 x 16 1820

H2352 240 H2352 x 9-1/2 9-1/2 9-7/16 260 221 330 36 51 HM3152 MS3152 M8 x 16 21

H2356 260 H2356 x 10 10 9-15/16, 10-7/16, 10-1/2 280 223 350 38 53 HM3156 MS3156 M8 x 16 23

H3260 280 H3260 x 11 11 10-15/16 300 240 380 40 54 HM3160 MS3160 M10 x 30 34

H3264 300 H3264 x 12 12 11-7/16, 11-1/2, 11-15/16 320 258 400 42 55 HM3164 MS3164 M10 x 30 40

H3268 320 H3268 x 12-1/2 12-1/2 12-7/16 340 288 440 55 70 HM3168 MS3168 M12 x 25 55

H3272 340 H3272 x 13 13 12-15/16, 13-7/16, 13-1/2 360 299 460 58 73 HM3172 MS3172 M12 x 25 61

H3276 360 H3276 x 14 14 13-15/16 380 310 490 60 75 HM3176 MS3176 M12 x 25 70

H3280 380 H3280 x 15 15 14-15/16 400 328 520 62 77 HM3180 MS3180 M16 x 30 76

H3284 400 H3284 x 15-3/4 15-3/4 — 420 352 540 70 85 HM3184 MS3184 M16 x 30 94

H3288 410 H3288 x 16-1/2 16-1/2 — 440 361 560 70 85 HM3188 MS3188 M16 x 30 118

H3292 430 H3292 x 17 17 — 460 382 580 75 90 HM3192 MS3192 M16 x 30 132

H3296 450 H3296 x 18 18 — 480 397 620 75 90 HM3196 MS3196 M16 x 30 152

H2300 & H3200 Series

Note: Larger Adapters on request. Sizes to H32/1000 possible. Hydraulic Nuts - - E are also available to assist in bearing mounting. See

Hydraulic Nut page. Sleeves also available as Hydraulic OH Series Adapters.

Use with 232 Series Spherical

Bearings Dimensions in mm

Hydraulic Adapter Sleeves

Nuts and Withdrawal Sleeves

Hydraulic Adapter Sleeves and Withdrawal

Sleeves are available on bores that exceed

200mm (8” inch). Adding this feature to

smaller units is possible when requested.

The oil channels allow hydraulic fluid to

expand the bearing inner ring slightly to

assist installation and removal. Hydraulic

nuts to assist installation are also available.

Hydraulic Adapter Sleeve Hydraulic Withdrawal Sleeve Hydraulic Nut

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 306 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Hydraulic Adapter Sleeves

OH3000 Series

OH3100 Series

Metric & Inch Bores

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Nut Lock

Washer G Weight

Part No. d kg 1 Part No. d1 d L D c c1

OH3032 140 OH3032 x 5-7/16 5-7/16 5-1/2 160 93 190 27.5 — KML32 MBL32 M6 5.2

OH3034 150 OH3034 x 5-15/16 5-15/16 6 170 101 200 28.5 — KML34 MBL34 M6 6.0

OH3036 160 OH3036 x 6-7/16 6-7/16 6-1/2 180 109 210 29.5 — KML36 MBL36 M6 6.9

OH3038 170 OH3038 x 6-15/16 6-15/16 7 190 112 220 30.5 — KML38 MBL38 M6 7.5

OH3040 180 OH3040 x 7-3/16 7-3/16 — 200 120 240 31.5 — KML40 MBL40 M6 9.2

OH3044 200 OH3044 x 7-15/16 7-15/16 8 220 128 260 30 41 HM3044 MS3044 M6 10.3

OH3048 220 OH3048 x 8-7/16 8-7/16 8-1/2, 8-15/16, 9 240 133 290 34 46 HM3048 MS3048 M6 13.2

OH3052 240 OH3052 x 9-7/16 9-7/16 9-1/2 260 147 310 34 46 HM3052 MS3052 M6 15.3

OH3056 260 OH3056 x 9-15/16 9-15/16 10, 10-7/16, 10-1/2 280 152 330 38 50 HM3056 MS3056 M6 17.7

OH3060 280 OH3060 x 10-15/16 10-15/16 11 300 168 360 42 54 HM3060 MS3060 M6 22.8

OH3064 300 OH3064 x 11-15/16 11-15/16 11-1/2, 12 320 171 380 42 55 HM3064 MS3064 M6 24.6

OH3068 320 OH3068 x 12-1/2 12-1/2 12-7/16 340 187 400 45 58 HM3068 MS3068 M6 28.7

OH3072 340 OH3072 x 12-15/16 12-15/16 13, 13-7/16 360 188 420 45 58 HM3072 MS3072 M6 30.5

OH3076 360 OH3076 x 13-15/16 13-15/16 14 380 193 450 48 62 HM3076 MS3076 M6 35.8

OH3080 380 OH3080 x 15 15 14-15/16 400 210 470 52 66 HM3080 MS3080 M6 41.3

OH3084 400 OH3084 x 15-3/4 15-3/4 — 420 212 490 52 66 HM3084 MS3084 M6 43.7

OH3088 410 OH3088 x 16-1/2 16-1/2 — 440 228 520 60 77 HM3088 MS3088 M8 65.2

OH3092 430 OH3092 x 17 17 — 460 234 540 60 77 HM3092 MS3092 M8 69.5

OH3096 450 OH3096 x 18 18 — 480 237 560 60 77 HM3096 MS3096 M8 73.3

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Nut Lock

Washer G Weight

Part No. d kg 1 Part No. d1 d L D c c1

OH3132 140 OH3132 x 5-7/16 5-7/16 5-1/2 160 119 210 28 — KM32 MB32 M6 7.7

OH3134 150 OH3134 x 5-15/16 5-15/16 6 170 122 220 29 — KM34 MB34 M6 8.4

OH3136 160 OH3136 x 6-7/16 6-7/16 6-1/2 180 131 230 30 — KM36 MB36 M6 9.5

OH3138 170 OH3138 x 6-15/16 6-15/16 7 190 141 240 31 — KM38 MB38 M6 11.0

OH3140 180 OH3140 x 7-3/16 7-3/16 — 200 150 250 32 — KM40 MB40 M6 12.0

OH3144 200 OH3144 x 7-15/16 7-15/16 8 220 161 280 32 44 HM3144 MS3144 M6 14.7

OH3148 220 OH3148 x 8-1/2 8-1/2 — 240 172 300 34 46 HM3148 MS3148 M6 17.3

OH3152 240 OH3152 x 9-1/2 9-1/2 9-7/16 260 190 330 36 49 HM3152 MS3152 M6 22.0

OH3156 260 OH3156 x 10-7/16 10-7/16 10-1/2 280 195 350 38 51 HM3156 MS3156 M6 24.5

OH3160 280 OH3160 x 11 11 10-15/16 300 208 380 40 53 HM3160 MS3160 M6 30.2

OH3164 300 OH3164 x 11-1/2 11-1/2 11-7/16, 11-15/16, 12 320 226 400 42 56 HM3164 MS3164 M6 34.9

OH3168 320 OH3168 x 12-1/2 12-1/2 12-7/16 340 254 440 55 72 HM3168 MS3168 M6 49.5

OH3172 340 OH3172 x 13 13 12-15/16, 13-7/16, 13-1/2 360 259 460 58 75 HM3172 MS3172 M6 54.2

OH3176 360 OH3176 x 14 14 13-15/16 380 264 490 60 77 HM3176 MS3176 M6 61.7

OH3180 380 OH3180 x 15 15 14-15/16 400 272 520 62 82 HM3180 MS3180 M6 70.6

OH3184 400 OH3184 x 15-3/4 15-3/4 — 420 304 540 70 90 HM3184 MS3184 M6 84.2

OH3188 410 OH3188 x 16-1/2 16-1/2 — 440 307 560 70 90 HM3188 MS3188 M8 104.0

OH3192 430 OH3192 x 17 17 — 460 326 580 75 95 HM3192 MS3192 M8 116.0

OH3196 450 OH3196 x 18 18 — 480 335 620 75 95 HM3196 MS3196 M8 133.0

OH3000 Series

Oil grooves for Hydraulic

removal

Sizes 44 and up with

locking plate

For 230 and 231 Series

Spherical Bearings

OH3100 Series

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 307 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Hydraulic Adapter Sleeves

OH2300 & OH3200 Series

Metric and Inch Bores

Metric Bore Inch Bore Other Stock

Bores

Dimensions (mm) Standard

Nut

Lock

Clip

Lock

Clip

Threads

G Wt.

kg Part No. d1 Part No. d1 d L D c c1

OH2348 220 OH2348 x 8-15/16 8-15/16 9 240 199 300 34 50 HM3148 MS3148 M8 x 16 M6 19

OH2352 240 OH2352 x 9-1/2 9-1/2 9-7/16 260 221 330 36 51 HM3152 MS3152 M8 x 16 M6 21

OH2356 260 OH2356 x 10 10 9-15/16, 10-7/16, 10-1/2 280 223 350 38 53 HM3156 MS3156 M8 x 16 M6 23

OH3260 280 OH3260 x 11 11 10-15/16 300 240 380 40 54 HM3160 MS3160 M10 x 30 M6 34

OH3264 300 OH3264 x 12 12 11-7/16, 11-1/2, 11-15/16 320 258 400 42 55 HM3164 MS3164 M10 x 30 M6 40

OH3268 320 OH3268 x 12-1/2 12-1/2 12-7/16 340 288 440 55 70 HM3168 MS3168 M12 x 25 M6 55

OH3272 340 OH3272 x 13 13 12-15/16, 13-7/16, 13-1/2 360 299 460 58 73 HM3172 MS3172 M12 x 25 M6 61

OH3276 360 OH3276 x 14 14 13-15/16 380 310 490 60 75 HM3176 MS3176 M12 x 25 M6 70

OH3280 380 OH3280 x 15 15 14-15/16 400 328 520 62 77 HM3180 MS3180 M16 x 30 M6 76

OH3284 400 OH3284 x 15-3/4 15-3/4 — 420 352 540 70 85 HM3184 MS3184 M16 x 30 M6 94

OH3288 410 OH3288 x 16-1/2 16-1/2 — 440 361 560 70 85 HM3188 MS3188 M16 x 30 M8 118

OH3292 430 OH3292 x 17 17 — 460 382 580 75 90 HM3192 MS3192 M16 x 30 M8 132

OH3296 450 OH3296 x 18 18 — 480 397 620 75 90 HM3196 MS3196 M16 x 30 M8 152

Sizes with locking clip

OH2300 & OH3200 Series

Note: Other sizes available on request. Hydraulic Nuts HMV--E are stock. Shaft side oil groove optional.

Dimensions in mm

Use with 232 Series

Spherical Bearings

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 308 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Withdrawal Sleeves

Metric Bores

The removal nut must be

ordered separately.

Withdrawal Sleeves, from size

AH 2236 and AH 2340 are also

available with oil ducts on the

outer and inner diameter for

hydraulic mounting.

Part No. Dimensions (mm) Thread Removal

Nut C D Weight

d d kg 1 d2 I

AH3024 120 110 130 60 M130x2 KM26 21 165 1.2

AH3124 120 110 140 75 M140x2 KM28 22 180 1.7

AH3026 130 120 140 67 M140x2 KM28 22 180 1.4

AH3126 130 120 150 78 M150x2 KM30 24 195 1.9

AH3028 140 130 150 68 M150x2 KM30 24 195 1.6

AH3128 140 130 160 83 M160x3 KM32 25 210 2.2

AH3030 150 140 160 72 M160x3 KM32 25 210 1.8

AH3130 150 140 170 96 M170x3 KM34 26 220 2.7

AH3032 160 150 170 77 M170x3 KM34 26 220 2.1

AH3132 160 150 180 103 M180x3 KM36 27 230 3.2

AH3232 160 150 180 124 M180x3 KM36 27 230 4.1

AH3034 170 160 180 85 M180x3 KM36 27 230 2.4

AH3134 170 160 190 104 M190x3 KM38 28 240 3.4

AH3234 170 160 190 134 M190x3 KM38 28 240 4.8

AH3036 180 170 190 92 M190x3 KM38 28 240 2.8

AH3136 180 170 200 116 M200x3 KM40 29 250 4.2

AH3236 180 170 200 140 M200x3 KM40 29 250 5.3

AH3038 190 180 205 96 Tr205x4 HML41T 30 250 3.4

AH3138 190 180 210 125 Tr210x4 HM42T 30 270 4.9

AH3238 190 180 210 145 Tr210x4 HM42T 30 270 5.9

AH3040 200 190 215 102 Tr215x4 HML43T 30 260 3.8

AH3140 200 190 220 134 Tr220x4 HM44T 32 280 5.5

AH3240 200 190 220 153 Tr220x4 HM44T 32 280 6.7

AH3044 220 200 235 111 Tr235x4 HML47T 30 280 7.4

AH3144 220 200 240 145 Tr240x4 HM48T 34 300 10.4

AH3048 240 220 260 116 Tr260x4 HML52T 36 310 8.8

AH3148 240 220 260 154 Tr260x4 HM52T 36 330 12.0

AH3052 260 240 280 128 Tr280x4 HML56T 30 330 10.7

AH3152 260 240 290 172 Tr290x4 HM58T 36 365 16.2

AH3056 280 260 300 131 Tr300x4 HML60T 31 360 12.0

AH3156 280 260 310 175 Tr310x5 HM62T 36 380 17.5

AH3060 300 280 320 145 Tr320x5 HML64T 32 380 14.4

AH3160 300 280 330 192 Tr330x5 HM66T 40 410 20.8

AH3260 300 280 330 228 Tr330x5 HM66T 40 410 26.0

AH3064 320 300 345 149 Tr345x5 HML69T 33 410 16.0

AH3164 320 300 350 209 Tr350x5 HM70T 42 430 24.5

AH3264 320 300 350 246 Tr350x5 HM70T 42 430 30.6

AH3068 340 320 365 162 Tr365x5 HML73T 35 430 19.5

AH3168 340 320 370 225 Tr370x5 HM74T 45 450 29.0

AH3268 340 320 370 264 Tr370x5 HM74T 45 450 35.4

AH3072 360 340 385 167 Tr385x5 HML77T 37 450 21.0

AH3172 360 340 400 229 Tr400x5 HM80T 46 500 33.0

AH3272 360 340 400 274 Tr400x5 HM80T 46 500 41.5

AH3076 380 360 410 170 Tr410x5 HML82T 39 480 23.2

AH3176 380 360 420 232 Tr420x5 HM84T 49 520 35.7

AH3276 380 360 420 284 Tr420x5 HM84T 49 520 45.6

AH3080 400 380 430 183 Tr430x5 HML86T 41 500 27.3

AH3180 400 380 440 240 Tr440x5 HM88T 51 540 39.5

AH3280 400 380 440 302 Tr440x5 HM88T 51 540 51.7

AH3084 420 400 450 186 Tr450x5 HML90T 41 520 29.0

AH3184 420 400 460 266 Tr460x5 HM92T 53 550 46.5

AH3284 420 400 460 321 Tr460x5 HM92T 53 550 58.9

AH 30, 31 and 32 Series

d

I

d1 d2 D

c

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 309 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

P.T. International Corp.

Withdrawal Sleeves

Metric Bores

Part No. Dimensions (mm) Thread Nut Weight

d d kg 1 d2 I

AH2308 40 35 45 40 M45x1.5 KM9 0.1

AH2309 45 40 50 44 M50x1.5 KM10 0.2

AH2310 50 45 60 50 M60x2 KM12 0.2

AH2311 55 50 65 54 M65x2 KM13 0.3

AH2312 60 55 70 57 M70x2 KM14 0.3

AH2313 65 60 75 61 M75x2 KM15 0.4

AH2314 70 65 85 65 M85x2 KM17 0.5

AH2315 75 70 90 69 M90x2 KM18 0.6

AH2316 80 75 95 72 M95x2 KM19 0.7

AH2317 85 80 100 75 M100x2 KM20 0.7

AH2318 90 85 105 80 M105x2 KM21 0.9

AH2319 95 90 110 85 M110x2 KM22 1.0

AH2320 100 95 120 90 M120x2 KM24 1.2

AH2322 110 100 130 98 M130x2 KM26 2.1

AH2324 120 110 140 105 M140x2 KM28 2.5

AH2326 130 120 150 115 M150x2 KM30 3.0

AH2328 140 130 160 125 M160x3 KM32 3.6

AH2330 150 140 170 135 M170x3 KM34 4.2

AH2332 160 150 180 140 M180x3 KM36 4.8

AH2334 170 160 190 146 M190x3 KM38 5.3

AH2236 180 170 200 105 M200x3 KM40 3.8

AH2336 180 170 200 154 M200x3 KM40 5.8

AH2238 190 180 210 112 Tr 210x4 HM42T 4.3

AH2338 190 180 210 160 Tr 210x4 HM42T 6.6

AH2240 200 190 220 118 Tr 220x4 HM44T 4.7

AH2340 200 190 220 170 Tr 220x4 HM44T 7.6

AH2244 220 200 240 130 Tr 240x4 HM48T 9.1

AH2344 220 200 240 181 Tr 240x4 HM48T 13.5

AH2248 240 220 260 144 Tr 260x4 HM52T 11.1

AH2348 240 220 260 189 Tr 260x4 HM52T 15.5

AH2252 260 240 290 155 Tr 290x4 HM58T 14.0

AH2352 260 240 290 205 Tr 290x4 HM58T 19.6

AH2256 280 260 310 155 Tr 310x5 HM62T 15.2

AH2356 280 260 310 212 Tr 310x5 HM62T 21.6

AH2260 300 280 330 170 Tr 330x5 HM66T 18.1

AH2264 320 300 350 180 Tr 350x5 HM70T 20.2

AH308 40 35 45 29 M45x1.5 KM9 0.1

AH309 45 40 50 31 M50x1.5 KM10 0.1

AH310 50 45 60 35 M60x2 KM12 0.2

AH311 55 50 65 37 M65x2 KM13 0.2

AH312 60 55 70 40 M70x2 KM14 0.2

AH313 65 60 75 42 M75x2 KM15 0.3

AH314 70 65 80 43 M80x2 KM16 0.3

AH315 75 70 85 45 M85x2 KM17 0.3

AH316 80 75 90 48 M90x2 KM18 0.4

AH317 85 80 100 52 M100x2 KM20 0.5

AH318 90 85 105 53 M105x2 KM21 0.5

AH319 95 90 110 57 M110x2 KM22 0.6

AH320 100 95 115 59 M115x2 KM23 0.7

AH322 110 100 130 63 M130x2 KM26 1.3

AH3122 110 100 125 68 M125x2 KM25 1.3

Withdrawal Sleeves, from size AH 2236

and AH 2340 are also available with oil

ducts on the outer and inner diameter for

hydraulic mounting.

AH30, 31 and 32 Series

AH22 and 23 Series

The removal nut has to be ordered

separately.

Withdrawal Sleeves offer a convenient

mounting alternative for straight bore

or adapter mounted applications.

The locknut on the shaft mounts the

bearing while a locknut on the sleeve

will dismount the bearing without shaft

damage.

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

P.T. International Corp.

Withdrawal Sleeves

AHX30, 31 and 32 Series

Metric Bores

The removal nut must be ordered

separately.

Part No. Dimensions (mm) Thread Nut Weight

d d kg 1 d2 I

AHX310 50 45 55 35 M55x2 KM11 0.1

AHX311 55 50 60 37 M60x2 KM12 0.2

AHX312 60 55 65 40 M65x2 KM13 0.2

AHX317 85 80 95 52 M95x2 KM19 0.4

AHX318 90 85 100 53 M100x2 KM20 0.5

AHX3218 90 85 100 63 M100x2 KM20 0.6

AHX319 95 90 105 57 M105x2 KM21 0.5

AHX320 100 95 110 59 M110x2 KM22 0.6

AHX3120 100 95 110 64 M110x2 KM22 0.6

AHX3220 100 95 110 73 M110 x2 KM22 0.8

AHX322 110 105 120 63 M120x2 KM24 0.7

AHX3122 110 105 120 68 M120x2 KM24 0.8

AHX3222 110 105 125 82 M125x2 KM25 1.0

AHX3024 120 115 130 60 M130x2 KM26 0.8

AHX3124 120 115 130 75 M130x2 KM26 0.9

AHX3224 120 115 135 90 M135x2 KM27 1.3

AHX3026 130 125 140 67 M140x2 KM28 0.9

AHX3126 130 125 140 78 M140x2 KM28 1.1

AHX3226 130 125 145 98 M145x2 KM29 1.6

AHX3028 140 135 150 68 M150x2 KM30 1.0

AHX3128 140 135 150 83 M150x2 KM30 1.3

AHX3228 140 135 155 104 M155x3 KM31 1.8

AHX3030 150 145 160 72 M160x3 KM32 1.1

AHX3130 150 145 165 96 M165x3 KM33 1.8

AHX3230 150 145 165 114 M165x3 KM33 2.2

Part No. Dimensions (mm) Thread Nut Weight

d d kg 1 d2 I

AHX2310 50 45 55 50 M55x2 KM11 0.21

AHX2311 55 50 60 54 M60x2 KM12 0.25

AHX2312 60 55 65 58 M65x2 KM13 0.30

AHX2314 70 65 80 64 M80x2 KM16 0.47

AHX2315 75 70 85 68 M85x2 KM17 0.53

AHX2316 80 75 90 71 M90x2 KM18 0.60

AHX2317 85 80 95 74 M95x2 KM19 0.67

AHX2318 90 85 100 79 M100x2 KM20 0.78

AHX2319 95 90 105 85 M105x2 KM21 0.88

AHX2320 100 95 110 90 M110x2 KM22 1.0

AHX2322 110 105 125 98 M125x2 KM25 1.4

AHX2324 120 115 135 105 M135x2 KM27 1.6

AHX2326 130 125 145 115 M145x2 KM29 2.0

AHX2328 140 135 155 125 M155x3 KM31 2.3

AHX2330 150 145 165 135 M165x3 KM33 2.8

AHX30, 31 and 32 Series

AHX23 Series

d

I

d1 d2

For 230 and 231 & 232 Series

Spherical Bearings

Inch Bores available on request

Removal Nut

For 223 Series Spherical Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Hydraulic Nuts

HMV..E Series

Metric Threads

HMV..C Series

Inch Threads

B B1

G1/4\"

G1/4\"

d3 G d1 d2

HMV..E Hydraulic Nuts are bearing mounting tools and fit on standard H-Series

adapters or OH-Series hydraulic adapter sleeves with METRIC threads. HMV..C

Hydraulic Nuts are bearing mounting tools and fit on standard SNW or SNP Series

adapters or OSNP hydraulic adapters with INCH threads. Hydraulic pressure from a

pump allows the piston in the face of the HMV Nut to push the bearing inner ring. As

the hydraulic pressure increases, the force of the piston gently pushes the tapered

bearing up the adapter taper, slightly expanding the bearing inner bore, causing

internal clearance to be removed from the bearing, therefore creating a press fit of

the inner ring to the shaft. During mounting, the bearing clearance should be

measured until the recommended mounted running clearance for the bearing size is

achieved. Once the bearing is properly mounted, the HMV nut can be replaced with

the standard KM nut and washer or lock clip. Smaller and larger hydraulic nuts are

available on request. A gauge mounting hole accomodates an axial gauge (gauge

not included) for monitoring axial movement of bearing. Hydraulic Nuts with Inch

threads are also avalable on request. A spanner wrench, extra O-ring seals, nylon

screw for gauge retention and hydraulic plugs are included with each nut.

Axial Displacement

Gauge

Hydraulic Nut

Pressure Gauge

Hydraulic Pump

Hydraulic Nut & Pump Rental Kits

HMV..E Metric Series HMV..C Inch Series d1

mm

d2

mm

d3

mm

B

mm

B1

mm

Max. Axial

Displacement

mm

Injection Hole

Thread

BSP

Wt.

Part No. G Part No. G kg

HMV 28E M 140x2 HMVC 28E 5.497”x12F 140.5 200 208 37 7 5 G1/4” 6.2

HMV 30E M 150x2 HMVC 30E 5.888”x12F 150.5 211 220 39 7 5 G1/4” 7.1

HMV 32E M 160x3 HMVC 32E 6.284”x8F 160.5 224 232 40 7 6 G1/4” 8.0

HMV 34E M 170x3 HMVC 34E 6.659”x8F 170.5 235 244 41 7 6 G1/4” 8.8

HMV 36E M 180x3 HMVC 36E 7.066”x8F 180.5 247 256 41 7 6 G1/4” 9.4

HMV 38E M 190x3 HMVC 38E 7.472”x8F 191 259 270 42 8 7 G1/4” 10.9

HMV 40E M 200x3 HMVC 40E 7.847”x8F 201 271 282 43 8 8 G1/4” 12.0

HMV 44E TR 220x4 HMVC 44E 8.628’x8F 222 293 306 43 8 9 G1/4” 14.1

HMV 48E TR 240x4 HMVC 48E 9.442”x6F 242 316 330 46 9 10 G1/4” 16.8

HMV 52E TR 260x4 HMVC 52E 10.192”x6F 262 341 356 47 9 11 G1/4” 19.8

HMV 56E TR 280x4 HMVC 56E 11.004”x6F 282 363 380 49 9 12 G1/4” 22.7

HMV 60E TR 300x4 HMVC 60E 11.785”x6F 302 386 404 50 10 14 G1/4” 26.2

HMV 64E TR 320x5 HMVC 64E 12.562”x6F 322 409 428 53 10 14 G1/4” 30.3

HMV 68E TR 340x5 HMVC 68E 13.339x5F 342 430 450 54 10 14 G1/4” 33.1

HMV 72E TR 360x5 HMVC 72E 14.170x5F 362 455 472 56 10 15 G1/4” 36.8

HMV 76E TR 380x5 HMVC 76E 14.957x5F 382 476 498 58 11 16 G1/4” 41.9

HMV 80E TR 400x5 HMVC 80E 15.745x5F 402 499 522 60 11 17 G1/4” 47.4

HMV 84E TR 420x5 HMVC 84E 16.532x5F 422 522 546 61 11 17 G1/4” 52.0

HMV 88E TR 440x5 HMVC 88E 17.319x5F 442 543 566 62 12 17 G1/4” 55.6

HMV 92E TR 460x5 HMVC 92E 18.107x5F 462 565 590 64 12 17 G1/4” 61.4

HMV 96E TR 280x5 HMVC 96E 18.894x5F 482 587 612 65 12 19 G1/4” 65.7

PTI offers a Hydraulic Pump & Hydraulic Nut

Rental Program to assist in the instillation of large

bore adapter mounted bearing & pillow block units.

Contact PTI for details.

Other sizes available on request.

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 310 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

GUK Type Lock Nuts

Self-Locking nut

Polyamide Insert

Metric ISO fine thread

Part No. Thread

d1

D D2 H T S Nut

Grooves

Wt.

kg/100 pcs

GUK0 M10 x 0.75 18 15 7.6 3 1.5 4 0.6

GUK1 M12 x 1 21 18 7.6 3 1.5 4 0.9

GUK2 M15 x 1 24 21 8.6 4 1.5 4 1.4

GUK3 M17 x 1 28 24 8.7 4 2.0 4 1.7

GUK4 M20 x 1 32 27 9.6 4 2.5 4 2.3

GUK5 M25 x 1.5 38 33 10.5 5 2.5 4 3.1

GUK6 M30 x 1.5 44 38 10.7 5 3.0 4 4.6

GUK7 M35 x 1.5 50 44 11.3 5 3.0 4 6.0

GUK8 M40 x 1.5 56 50 12.3 6 3.0 4 7.5

GUK9 M45 x 1.5 62 55 12.3 6 3.5 4 9.3

GUK10 M50 x 1.5 68 61 12.9 6 3.5 4 11.3

GUK11 M55 x 2 75 68 13.4 7 3.5 6 14.6

GUK12 M60 x 2 80 73 13.4 7 3.5 6 15.9

GUK13 M65 x 2 85 77 14.5 7 4.0 6 19.0

GUK14 M70 x 2 92 84 14.5 8 4.0 6 22.1

GUK15 M75 x 2 98 89 15.5 8 4.5 6 26.1

GUK16 M80 x 2 105 96 16.5 8 4.0 8 32.1

GUK17 M85 x 2 110 100 17.5 8 5.0 8 37.1

GUK18 M90 x 2 120 110 17.7 10 5.0 8 46.6

GUK19 M95 x 2 125 115 18.7 10 5.0 8 51.6

GUK20 M100 x 2 130 120 19.7 10 5.0 8 59.6

Self-locking by the Polyamide Insert - temperature max: 100°C / 212°F

The bore of the threadless Polyamide Insert is slightly smaller than the inner diameter of the nut,

therefore increasing friction between nut and shaft for locking.

Zinc Plated and passivated finish.

Dimensions in mm

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 311 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Lock Nuts

Standard & Mounting Screw Type

KM Series

KML Series

KM Series KML Series Dimensions

Lock Nut

Part No.

Part No.

Locknut w/

Mounting

Screws

D3 D4 g

Lock Nut

Part No. D3 D4 g D1 C S T D6

Wt.

kg

KM0 — 18 13 14 — — — — M10 x 0.75 4 3 2 10.5 0.005

KM1 — 22 17 18 — — — — M12 x 1.00 4 3 2 12.5 0.007

KM2 — 25 21 21 — — — — M15 x 1.00 5 4 2 15.5 0.01

KM3 — 28 24 24 — — — — M17 x 1.00 5 4 2 17.5 0.01

KM4 — 32 26 26 — — — — M20 x 1.00 6 4 2 20.5 0.02

KM5 — 38 32 34 — — — — M25 x 1.50 7 5 2 25.8 0.03

KM6 — 45 38 41 — — — — M30 x 1.50 7 5 2 30.8 0.04

KM7 — 52 44 48 — — — — M35 x 1.50 8 5 2 35.8 0.05

KM8 — 58 50 53 — — — — M40 x 1.50 9 6 2.5 40.8 0.09

KM9 — 65 56 60 — — — — M45 x 1.50 10 6 2.5 45.8 0.12

KM10 — 70 61 65 — — — — M50 x 1.50 11 6 2.5 50.8 0.15

KM11 — 75 67 69 — — — — M55 x 2.00 11 7 3 56.0 0.16

KM12 — 80 73 74 — — — — M60 x 2.00 11 7 3 61.0 0.17

KM13 — 85 79 79 — — — — M65 x 2.00 12 7 3 66.0 0.20

KM14 — 95 85 85 — — — — M70 x 2.00 12 8 3.5 71.0 0.24

KM15 — 98 90 91 — — — — M75 x 2.00 13 8 3.5 76.0 0.29

KM16 — 105 95 98 — — — — M80 x 2.00 15 8 3.5 81.0 0.40

KM17 — 110 102 103 — — — — M85 x 2.00 16 8 3.5 86.0 0.45

KM18 — 120 108 112 — — — — M90 x 2.00 16 10 4 91.0 0.56

KM19 — 125 113 117 — — — — M95 x 2.00 17 10 4 96.0 0.66

KM20 — 130 120 122 — — — — M100 x 2.00 18 10 4 101.0 0.70

KM21 — 140 126 130 — — — — M105 x 2.00 18 12 5 106.0 0.85

KM22 KM22-MS 145 133 135 — — — — M110 x 2.00 19 12 5 111.0 0.97

KM23 — 150 137 140 — — — — M115 x 2.00 19 12 5 116.0 1.01

KM24 KM24-MS 155 138 145 KML24 145 135 135 M120 x 2.00 20 12 5 121.0 1.08

KM25 — 160 148 150 — — — — M125 x 2.00 21 12 5 126.0 1.19

KM26 KM26-MS 165 149 155 KML26 155 145 145 M130 x 2.00 21 12 5 131.0 1.25

KM27 — 175 160 163 — — — — M135 x 2.00 22 14 6 136.0 1.55

KM28 KM28-MS 180 160 168 KML28 165 155 153 M140 x 2.00 22 14 6 141.0 1.56

KM29 — 190 171 178 — — — — M145 x 2.00 24 14 6 146.0 2.00

KM30 KM30-MS 195 172 183 KML30 180 170 168 M150 x 2.00 24 14 6 151.0 2.03

KM31 — 200 182 186 — — — — M155 x 3.00 25 16 7 156.5 2.21

KM32 KM32-MS 210 182 196 KML32 190 180 176 M160 x 3.00 25 16 7 161.5 2.59

KM33 — 210 193 196 — — — — M165 x 3.00 26 16 7 166.5 2.43

KM34 KM34-MS 220 193 206 KML34 200 190 186 M170 x 3.00 26 16 7 171.5 2.80

KM36 KM36-MS 230 203 214 KML36 210 200 194 M180 x 3.00 27 18 8 181.5 3.07

KM38 KM38-MS 240 214 224 KML38 220 210 204 M190 x 3.00 28 18 8 191.5 3.39

KM40 KM40-MS 250 226 234 KML40 240 222 224 M200 x 3.00 29 18 8 201.5 3.69

Dimensions in mm

Standard Locknut

Locknut with Mounting Screws

Mounting screws simplify bearing mounting with a

Torque Wrench rather than a Spanner Wrench

Note: Other sizes available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 312 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Lock Nuts

HM3100 Series

HM3000 Series

Part

No.

D1

Thread D3 D4 g S T D6 C l f B.C. Lock Clip

Part No.

Wt.

kg

HM3144 TR220 x 4 280 250 260 20 10 222.0 32 15 M8 x 1.25 238 MS3144 / MS3148 5.20

HM3148 TR240 x 4 300 270 280 20 10 242.0 34 15 M8 x 1.25 258 MS3144 / MS3148 5.95

HM3152 TR260 x 4 330 300 306 24 12 262.0 36 18 M10 x 1.50 281 MS3152 / MS3156 8.05

HM3156 TR280 x 4 350 320 326 24 12 282.0 38 18 M10 x 1.50 301 MS3152 / MS3156 9.05

HM3160 TR300 x 4 380 340 356 24 12 302.0 40 18 M10 x 1.50 326 MS3160 11.80

HM3164 TR320 x 5 400 360 376 24 12 322.5 42 18 M10 x 1.50 345 MS3164 13.10

HM3168 TR340 x 5 440 400 410 28 15 342.5 55 21 M12 x 1.75 372 MS3168 / MS3172 23.10

HM3172 TR360 x 5 460 420 430 28 15 362.5 58 21 M12 x 1.75 392 MS3168 / MS3172 25.10

HM3176 TR380 x 5 490 450 454 32 18 382.5 60 21 M12 x 1.75 414 MS3176 30.90

HM3180 TR400 x 5 520 470 484 32 18 402.5 62 27 M16 x 2.00 439 MS3180 / MS3184 36.90

HM3184 TR420 x 5 540 490 504 32 18 422.5 70 27 M16 x 2.00 459 MS3180 / MS3184 43.50

HM3188 TR440 x 5 560 510 520 36 20 442.5 70 27 M16 x 2.00 477 MS3188 / MS3192 45.30

HM3192 TR460 x 5 580 540 540 36 20 462.5 75 27 M16 x 2.00 497 MS3188 / MS3192 50.4

HM3196 TR480 x 5 620 560 580 36 20 482.5 75 27 M16 x 2.00 527 MS3196 62.2

Part

No.

D1

Thread D3 D4 g S T D6 C l f B.C. Lock Clip

Part No.

Wt.

kg

HM3044 TR220 x 4 260 242 242 20 9 222.0 30 12 M6 x 1.00 229 MS3044 3.09

HM3048 TR240 x 4 290 270 270 20 10 242.0 34 15 M8 x 1.25 253 MS3048 / MS3052 5.16

HM3052 TR260 x 4 310 290 290 20 10 262.0 34 15 M8 x 1.25 273 MS3048 / MS3052 5.67

HM3056 TR280 x 4 330 310 310 24 10 282.0 38 15 M8 x 1.25 293 MS3056 6.78

HM3060 TR300 x 4 360 336 336 24 12 302.0 42 15 M8 x 1.25 316 MS3060 9.62

HM3064 TR320 x 5 380 356 356 24 12 322.5 42 15 M8 x 1.25 335 MS3064 / MS3068 9.94

HM3068 TR340 x 5 400 376 376 24 12 342.5 45 15 M8 x 1.25 355 MS3064 / MS3068 11.70

HM3072 TR360 x 5 420 394 394 28 13 362.5 45 15 M8 x 1.25 374 MS3072 12.0

HM3076 TR380 x 5 450 422 422 28 14 382.5 48 18 M10 x 1.50 398 MS3076 / MS3080 14.9

HM3080 TR400 x 5 470 442 442 28 14 402.5 52 18 M10 x 1.50 418 MS3076 / MS3080 16.9

HM3084 TR420 x 5 490 462 462 32 14 422.5 52 18 M10 x 1.50 438 MS3084 17.4

HM3088 TR440 x 5 520 490 490 32 15 442.5 60 21 M12 x 1.75 462 MS3088 / MS3092 26.2

HM3092 TR460 x 5 540 510 510 32 15 462.5 60 21 M12 x 1.75 482 MS3088 / MS3092 29.6

HM3096 TR480 x 5 560 530 530 36 15 482.5 60 21 M12 x 1.75 502 MS3096 28.3

HM3100 Series

HM3000 Series

D3 g B.C. D1

l

D6 D4

C

30° S T

f

Dimensions in mm

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 313 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Inch Lock Nuts

N000 Series

Part

No.

Threads

D E C S T B.C. d1 S1

Wt.

lb Major Dia.

d

No. per

Inch

N022 4.325 12 5.318 4.901 0.791 0.485 0.198 — — — 1.6

N024 4.716 12 5.693 5.313 0.823 0.485 0.198 — — — 1.7

N026 5.106 12 6.130 5.703 0.885 0.485 0.198 — — — 2.0

N028 5.497 12 6.505 6.109 0.948 0.485 0.198 — — — 2.2

N030 5.888 12 7.130 2.288 0.979 0.610 0.229 — — — 3.0

N032 6.284 8 7.505 7.094 1.041 0.610 0.229 — — — 3.4

N034 6.659 8 7.880 7.484 1.073 0.610 0.229 — — — 3.8

N036 7.066 8 8.255 7.875 1.104 0.610 0.229 — — — 4.3

N038 7.472 8 8.693 8.266 1.135 0.610 0.229 — — — 4.6

N040 7.847 8 9.443 8.750 1.198 0.735 0.323 — — — 6.6

N044 8.628 8 10.255 9.531 1.260 0.860 0.385 — — — 6.8

N048 9.442 6 11.443 10.625 1.354 0.860 0.385 10.423 5/16-18 0.625 11.4

N052 10.192 6 12.193 11.406 1.416 0.860 0.385 11.298 5/16-18 0.625 12.5

N056 11.004 6 13.005 12.219 1.510 0.980 0.385 12.110 5/16-18 0.625 14.9

N060 11.785 6 14.193 13.219 1.573 0.980 0.510 13.110 3/8-16 0.750 21.2

N064 12.562 6 15.005 14.031 1.666 0.980 0.510 13.860 3/8-16 0.750 21.9

N068 13.339 5 15.755 14.813 1.791 0.980 0.510 14.735 3/8-16 0.750 25.8

N072 14.170 5 16.505 15.500 1.791 1.230 0.510 15.485 3/8-16 0.750 26.5

N076 14.957 5 17.755 16.625 1.916 1.230 0.604 16.485 1/2-13 0.875 32.8

N080 15.745 5 18.505 17.438 2.073 1.230 0.604 17.235 1/2-13 0.875 37.3

N084 16.532 5 19.318 18.188 2.073 1.355 0.604 18.110 1/2-13 0.875 38.4

N088 17.319 5 20.505 19.250 2.385 1.355 0.604 19.110 5/8-11 1.250 57.5

N092 18.107 5 21.255 20.688 2.385 1.355 0.604 19.985 5/8-11 1.250 65.3

N096 18.894 5 22.068 20.750 2.385 1.480 0.604 20.673 5/8-11 1.250 62.4

Dimensions in inches

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 314 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Inch Lock Nuts

Standard & with Mounting Screws

N00 Series

AN00 Series

d E

C

D

S T 50°

Part No.

Standard

Part No. with

Mounting Screws

Threads

D E C S

min.

T

max.

Wt.

lb Major Dia.

d

No. per

Inch

N00 — 0.391 32 0.755 0.625 0.229 0.120 0.073 0.01

N01 — 0.469 32 0.880 0.719 0.323 0.120 0.073 0.02

N02 — 0.586 32 1.005 0.813 0.323 0.120 0.104 0.02

N03 — 0.664 32 1.130 0.938 0.354 0.120 0.104 0.03

N04 — 0.781 32 1.380 1.125 0.385 0.178 0.104 0.04

N05 — 0.969 32 1.568 1.281 0.416 0.178 0.104 0.05

N06 — 1.173 18 1.755 1.500 0.416 0.178 0.104 0.10

N07 — 1.376 18 2.068 1.813 0.448 0.178 0.104 0.11

N08 — 1.563 18 2.255 2.000 0.448 0.240 0.104 0.19

N09 — 1.767 18 2.536 2.281 0.448 0.240 0.104 0.36

N10 — 1.967 18 2.693 2.438 0.510 0.240 0.104 0.33

N11 — 2.157 18 2.974 2.656 0.510 0.240 0.135 0.35

N12 — 2.360 18 3.161 2.844 0.541 0.240 0.135 0.38

N13 — 2.548 18 3.380 3.063 0.573 0.240 0.135 0.45

N14 — 2.751 18 3.630 3.313 0.573 0.240 0.135 0.53

AN15 — 2.933 12 3.880 3.563 0.604 0.360 0.135 0.63

AN16 — 3.137 12 4.161 3.844 0.604 0.360 0.135 0.88

AN17 — 3.340 12 4.411 4.031 0.635 0.360 0.166 0.99

AN18 — 3.527 12 4.661 4.281 0.698 0.360 0.166 1.23

AN19 — 3.730 12 4.943 4.563 0.729 0.360 0.166 1.45

AN20 AN20-MS 3.918 12 5.193 4.813 0.760 0.360 0.166 1.54

AN21 — 4.122 12 5.443 5.000 0.760 0.485 0.198 1.86

AN22 AN22-MS 4.325 12 5.724 5.281 0.791 0.485 0.198 2.13

AN24 AN24-MS 4.716 12 6.130 5.688 0.823 0.485 0.198 2.38

AN26 AN26-MS 5.106 12 6.755 6.188 0.885 0.610 0.260 2.76

AN28 AN28-MS 5.497 12 7.099 6.531 0.948 0.610 0.360 3.44

AN30 AN30-MS 5.888 12 7.693 7.063 0.979 0.610 0.391 4.48

AN32 AN32-MS 6.284 8 8.068 7.438 1.041 0.610 0.291 5.71

AN34 AN34-MS 6.659 8 8.661 8.031 1.073 0.610 0.291 6.17

AN36 AN36-MS 7.066 8 9.068 8.375 1.104 0.735 0.323 6.77

AN38 AN38-MS 7.472 8 9.474 8.781 1.135 0.735 0.323 7.47

AN40 AN40-MS 7.847 8 9.849 9.156 1.198 0.735 0.323 8.14

AN44 AN44-MS 8.628 8 11.005 9.843 1.260 0.980 0.510 11.5

Dimensions in inches

Locknut w/ Mounting Screws allows easy bearing

mounting as screws are tightened

Standard Locknut

Locknut with Mounting Screws

Note: Other sizes available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 315 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Inch Lock Washers

W00 Series

W000 Series

Part

No.

Bore

R

E B S X

min. No. of

Tangs

V T Q

W00 W000 W00 W000 W00 W000 W00 W000 W00 W00 W000 W00 W000

W00 — 0.406 0.625 — 0.875 — 0.120 — 0.334 9 0.062 0.120 — 0.032 —

W01 — 0.484 0.719 — 1.016 — 0.120 — 0.412 9 0.062 0.120 — 0.032 —

W02 — 0.601 0.813 — 1.156 — 0.120 — 0.529 11 0.062 0.120 — 0.032 —

W03 — 0.679 0.938 — 1.328 — 0.120 — 0.607 11 0.062 0.120 — 0.032 —

W04 — 0.801 1.125 — 1.531 — 0.176 — 0.729 11 0.062 0.166 — 0.032 —

W05 — 0.989 1.281 — 1.719 — 0.176 — 0.909 13 0.094 0.166 — 0.040 —

W06 — 1.193 1.500 — 1.922 — 0.176 — 1.093 13 0.094 0.166 — 0.040 —

W07 — 1.396 1.813 — 2.250 — 0.176 — 1.296 15 0.094 0.166 — 0.040 —

W08 — 1.583 2.000 — 2.469 — 0.290 — 1.475 15 0.094 0.234 — 0.048 —

W09 — 1.792 2.281 — 2.734 — 0.290 — 1.684 17 0.125 0.234 — 0.048 —

W10 — 1.992 2.438 — 2.922 — 0.290 — 1.884 17 0.125 0.234 — 0.048 —

W11 — 2.182 2.656 — 3.109 — 0.290 — 2.069 17 0.125 0.234 — 0.053 —

W12 — 2.400 2.844 — 3.344 — 0.290 — 2.267 17 0.125 0.234 — 0.053 —

W13 — 2.588 3.063 — 3.578 — 0.290 — 2.455 19 0.125 0.234 — 0.053 —

W14 — 2.791 3.313 — 3.828 — 0.290 — 2.658 19 0.188 0.234 — 0.053 —

W15 — 2.973 3.563 — 4.109 — 0.290 — 2.831 19 0.188 0.328 — 0.062 —

W16 — 3.177 3.844 — 4.375 — 0.353 — 3.035 19 0.188 0.328 — 0.062 —

W17 — 3.395 4.031 — 4.625 — 0.353 — 3.253 19 0.188 0.328 — 0.062 —

W18 — 3.582 4.281 — 4.938 — 0.353 — 3.418 19 0.188 0.328 — 0.084 —

W19 — 3.800 4.563 — 5.219 — 0.353 — 3.636 19 0.188 0.328 — 0.084 —

W20 — 3.988 4.813 — 5.500 — 0.353 — 3.809 19 0.250 0.328 — 0.084 —

W21 — 4.192 5.000 — 5.703 — 0.353 — 4.013 19 0.250 0.390 — 0.084 —

W22 W022 4.395 5.281 4.921 6.063 5.688 0.353 0.350 4.185 19 0.250 0.390 0.390 0.115 0.115

W24 W024 4.801 5.688 5.333 6.469 6.188 0.353 0.350 4.591 19 0.250 0.390 0.390 0.115 0.115

W26 W026 5.191 6.188 5.723 7.031 6.625 0.435 0.469 4.961 19 0.250 0.520 0.390 0.115 0.115

W28 W028 5.582 6.531 6.129 7.438 7.094 0.590 0.594 5.352 19 0.250 0.520 0.390 0.115 0.115

W30 W030 5.983 7.063 6.708 8.063 7.719 0.590 0.594 5.722 19 0.313 0.520 0.520 0.146 0.115

W32 W032 6.389 7.438 7.114 8.438 8.156 0.590 0.594 6.128 19 0.313 0.520 0.520 0.146 0.115

W34 W034 6.764 8.031 7.508 9.063 8.594 0.715 0.719 6.503 19 0.313 0.520 0.520 0.146 0.115

W36 W036 7.171 8.375 7.899 9.438 9.000 0.715 0.719 6.910 19 0.313 0.645 0.520 0.146 0.115

W38 W038 7.577 8.781 8.290 9.875 9.438 0.715 0.719 7.316 19 0.313 0.645 0.520 0.146 0.115

W40 W040 7.982 9.156 8.774 10.313 9.969 0.840 0.844 7.721 19 0.313 0.645 0.645 0.146 0.115

W44 W044 8.701 9.875 9.570 11.438 10.406 0.940 0.945 8.327 19 — 0.878 0.770 0.146 0.115

Dimensions in inches

T

S

R R

S

T

B B

E

X

V

E

Q

45° X

Q 25°

W00 Series W000 Series

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 316 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Lock Washers

MB Series

Part

No. D1 k E t S D4 D5 Tangs Use with

Lock Nut

Wt.

kg/1000 Pcs

MB0 10 8.5 3 1 3 13 21 9 KM0 0.13

MB1 12 10.5 3 1 3 17 25 9 KM1 0.20

MB2 15 13.5 4 1 4 21 28 13 KM2 0.26

MB3 17 15.5 4 1 4 24 32 13 KM3 0.32

MB4 20 18.5 4 1 4 26 36 13 KM4 0.35

MB5 25 23 5 1.2 5 32 42 13 KM5 0.64

MB6 30 27.5 5 1.2 5 38 49 13 KM6 0.78

MB7 35 32.5 6 1.2 5 44 57 15 KM7 1.04

MB8 40 37.5 6 1.2 6 50 62 15 KM8 1.23

MB9 45 42.5 6 1.2 6 56 69 17 KM9 1.52

MB10 50 47.5 6 1.2 6 61 74 17 KM10 1.60

MB11 55 52.5 8 1.2 7 67 81 17 KM11 1.96

MB12 60 57.5 8 1.5 7 73 86 17 KM12 2.53

MB13 65 62.5 8 1.5 7 79 92 19 KM13 2.90

MB14 70 66.5 8 1.5 8 85 98 19 KM14 3.34

MB15 75 71.5 8 1.5 8 90 104 19 KM15 3.56

MB16 80 76.5 10 1.8 8 95 112 19 KM16 4.64

MB17 85 81.5 10 1.8 8 102 119 19 KM17 5.24

MB18 90 86.5 10 1.8 10 108 126 19 KM18 6.23

MB19 95 91.5 10 1.8 10 113 133 19 KM19 6.70

MB20 100 96.5 12 1.8 10 120 142 19 KM20 7.65

MB21 105 100.5 12 1.8 12 126 145 19 KM21 8.26

MB22 110 105.5 12 1.8 12 133 154 19 KM22 9.40

MB23 115 110.5 12 2 12 137 159 19 KM23 10.80

MB24 120 115 14 2 12 138 164 19 KM24 10.50

MB25 125 120 14 2 12 148 170 19 KM25 11.80

MB26 130 125 14 2 12 149 175 19 KM26 11.30

MB27 135 130 14 2 14 160 185 19 KM27 14.40

MB28 140 135 16 2 14 160 192 19 KM28 14.20

MB29 145 140 16 2 14 172 202 19 KM29 16.80

MB30 150 145 16 2 14 171 205 19 KM30 15.50

MB31 155 147.5 16 2.5 16 182 212 19 KM31 20.90

MB32 160 154 18 2.5 16 182 217 19 KM32 22.20

MB33 165 157.5 18 2.5 16 193 222 19 KM33 24.10

MB34 170 164 18 2.5 16 193 232 19 KM34 24.70

MB36 180 174 20 2.5 18 203 242 19 KM36 26.80

MB38 190 184 20 2.5 18 214 252 19 KM38 27.80

MB40 200 194 20 2.5 18 226 262 19 KM40 29.30

S

E

D1

k D4 D5

t

25°

Dimensions in mm

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 317 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Deep Groove Radial Ball Bearings

Seals Shields & Snap Rings:

Introduction

Product Range:

Technical Features:

Heat Stabilization of Races:

250°F, higher possible on request

Clearances:

C3 Normal

C0, C4, and others on request

Options:

High Temperature Units

External snap rings

Customized Lubrication: Tolerances:

Normal ABEC 1, P6

ZZ 2RS

Cages:

Single Row Deep Groove Ball

Bearings are very popular and

applied in a wide variety of

applications. They are capable of

high speeds, low torque, and able

to handle both radial and thrust

loads very economically. They

can be supplied with external

snap rings, and bulk packed or

individual if needed.

Double Row Deep Groove Ball

Bearings popular as well basically two

single row ball bearings side by side,

yet a single inner and outer race.

They can handle thrust loads in either

direction. and also applied in a wide

variety of applications. The 5200 and

5300 Series are capable of high

speeds, yet heavier loads from 6200

and 6300 Single Row Series.

1600 Commercial Series 1601 thru 1652-2RS, ZZ & open

R-Series, Precision Inch, R2 thru R24 -2RS, ZZ & open

600 Series, Miniature & Extra Small, 624 thru 629 2RS, ZZ & open

6000 Series, 6000 thru 6026, Industrial Series, -2RS, ZZ & Open

6200 Series, 6200 thru 6028, Industrial Series, -2RS, ZZ & Open

6300 Series, 6300 thru 6320, Industrial Series, -2RS, ZZ & Open

6900 Series, 6900 thru 6910, Metric Series, -2RS, ZZ & Open

5200 Series, 5200 thru 5216, Industrial Series, -2RS, ZZ & Open

5300 Series, 5300 thru 5316, Industrial Series, -2RS, ZZ & Open

Other sizes on request.

Deep Groove Radial Ball Bearings are used in nearly every aspect

of the industrial market. They are very common, simple in design,

interchange easily, economical, capable of high speeds and require

very little attention. Hence they are a very logical choice for a wide

variety of applications. PTI now offers the following single and

double row series from stock.

Dimensions: According to ISO 15:2011

Tolerances: ABEC 1

Misalignment: 2 minutes

Cage Material: Pressed steel, others on request

Axial Loads: Up to 50% of Co for 6200 & 6300 Series

Up to 25% of Co for 6000 Series

Seals: NBR Rubber Seals (RS, 2RS) Contact lip, options on

request

Shields: Steel Labyrinth, Z and ZZ (non contact)

Speed: See individual Sizes, Apply higher speeds at light loads,

heavier loads at lower speeds it typical.

NLGI 2 Lithium Base Temp Range -4°F to 250°F

Other lubes are available for higher or lower operating

needs. Standard units should not be heated above

250°F during installation. Bearings are approx. 35%

filled as stocked. Other options available.

Pressed Steel, riveted, ball

guided, good for higher temps

Phenolic available on request

2RS - 2 rubber seals

ZZ - Shielded both sides

Open, no seals or shields

OD Snap rings available on

request

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 318 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearing Technical Data

Radial Clearance

Radial Clearance is the internal radial looseness between the

balls and the races and is the measured value of the total

movement of one ring with respect to the other in a plane perpendicular to the shaft axis. Radial clearance is an important

consideration as speed, load, thermal condition, mounting fit of

both outer and inner race, axial motion and general deflection

of the shaft are determined. Improper selection of the radial

clearance can affect the overall running performance, and may

result in premature bearing failure. See Chart 1 for Radial

clearances as described in AFBMA standards. For more

details contact PTI.

Radial

Clearance

In general, as the speed and load on the bearing increases, operating temperature of the bearing increases. This may require increasing the radial clearance so

a running clearance is always maintained. Radial type bearings are often pressed

onto the shaft which causes the inner race to expand slightly. This practice

reduces internal clearance, so fit of bearings on the shaft, or within a housing generally reduces the clearance during the mounting process. Awareness of this will

help determine the proper radial clearance to specify.

Assembly of Bearings onto a Shaft

When installing bearings onto a tight shaft, generally referred to as a \"Press Fit\",

assembly force should be applied to the inner race only.

When installing bearings into a tight housing, force would be applied to the outer

ring only. Failure to follow these simple guidelines will damage the bearing, possibly brinelling the races, causing vibration, noise and premature bearing failure.

Fitting Practices of Bearings

A pre-loaded bearing is a candidate for early failure. This might be only feasible

for a very slow rotating bearing where no radial clearance can be tolerated in the

application. But generally this is not advised as temperature changes will pre-load

the bearings further.

For most applications a \"line to line\" to slightly loose shaft and housing fits are

desirable and satisfactory for most general applications.

An Interference fit may be necessary to prevent one of the bearings rings from

rotating relative to its mating part while under heavy load or when or vibrations are

present. A tight fit of both rings (to shaft and to housing) is not recommended.

This generally results in unwanted axial loads as temperature changes forcing a

pre-load on the bearing. Hence one of the Bearings rings must be free to move on

its mating part for the best results.

Radial Clearance - Metric and Inch Ball Bearings Chart 1

Axial Clearance vs Radial Clearance

The axial clearance in a bearing is generally proportional to the radial clearance.

As radial clearance is reduced, axial clearance is also reduced. Contact PTI Engineering for recommendations

Expansion and Non Expansion Bearings

Generally when 2 bearings are installed on the shaft, one is typically the fixed or

non-expansion bearing and the other is the expansion or float bearing. In radial

ball bearings both are normally considered fixed since they are relatively close to

one another. If a long distance occurs between bearings, thermal expansion of

the shaft may impose an axial load due to a growing shaft. For a shorter distance

between bearings this is typically not a concern. However, the axial play mentioned above may help absorb small changes in shaft length.

Bore

Diameter Radial Clearance Acceptance Limits (Values in 0.0001\")

mm in C2 Tight C0 Normal C3 Loose C4 Extra Loose

Over Incl Over Incl Low High Low High Low High Low High

— 2.5 — 0.0984 0 3 1 5 3 9 5 11

2.5 6 0.0984 0.2362 0 3 1 5 3 9 5 11

6 10 0.2362 0.3937 0 3 1 5 3 9 5 11

10 18 0.3937 0.7087 0 3.5 1 7 4 10 7 13

18 24 0.7087 0.9449 0 4 2 8 2 11 8 14

24 30 0.9449 1.1811 0 4.5 2 8 5 11 9 16

30 40 1.1811 1.5748 0 4.5 2 8 6 13 11 18

40 50 1.5748 1.9685 0 4.5 2 9 7 14 12 20

50 65 1.9685 2.5591 0 6 3 11 9 17 15 24

65 80 2.5591 3.1496 0 6 4 12 10 20 18 28

80 100 3.1496 3.9370 0 7 5 14 12 23 21 33

100 120 3.9370 4.7244 0 8 6 16 14 26 24 38

Note: Measurements according to AFBMA Standards.

Radial Ball Bearing Numbering Nomenclature and Considerations

The following details are typically standard to the industry, and will help with the selection and general topics to insure the right bearing and features for the application.

1. Material

Blank: SAE52100 Chrome Steel (most popular)

S: AISI 440C Stainless Steel

D:AISI 300 Stainless Steel

C: Carbon Steel

2. Type

Blank: or M Metric Series

F or MF = Flanged Metric Series

3. Closure

Blank: Open (no seals or shields)

Z: Single Shield, One side

ZZ: Double Shields, Both Sides

RS: Single Rubber Seal (Buna-N)

2RS: Two Rubber Seals (Buna-N)

V: Single Non-Contact Seal (Buna-N)

VV: Two Non-Contact Seals (Buna-N)

RST: Single Trash Seal (Flinger)

2RST: Two Trash Seals (Flingers)

TS: Single Teflon Seal

2TS: Two Teflon Seals

2VS: Two Viton Seals

4. Cage (Ball Retainer)

Blank: Steel

M: Brass or Bronze

TN: Nylon

5. OD Modification

N: Grooved without Snap Ring

NR: Grooved With Snap Ring

6. ID Modification

Custom bore, -10 (10/16 = 5/8)

7. Internal Clearance

Blank or C0: Standard

C2: Tight P13 = 0.0001\" to 0.0003\"

C3: Loose P25 = 0.0002\" to 0.0005\"

C4: Extra Loose P36 = 0.0003\" to

0.0006\"

C5: Extra, Extra Loose P58 = 0.0005\"

to 0.0008\"

8. Tolerance(s)

A1: ABEC 1 (Most Common)

A3: ABEC 3 (Tighter bore and OD tolerances as ABEC rating increases)

A5: ABEC 5

A7: ABEC 7

9: Lubrication

Request Chart, many options are available, including the amount of lube. PTI will help

specify the right lube for your application.

10. Noise Level:

Blank: Standard

EMQ: Electric Motor Quality

Additional levels available, Call PTI to discuss.

In order to properly document bearings, approval drawings will be provided with details

noted for the above considerations. We can also use customer provided drawings and

nomenclature as well.

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 319 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Technical Data

Engineering, Fits & Tolerances

Operating Conditions Shaft Diameter Average Fit Fit Range Suggested Radial Clearance Range

Shaft Load Speed A3 A5 A7 A3 A5 A7 A3 A5 A7 Predominate Radial Load Predominate Thrust Load

Rotating

Shaft

Light Low B-0.0002 0.0002 L 0.0000 P25* P36-P58 B-0.0004 0.0004 L

Light High B-0.0001 0.0001 L 0.0001 T P36 P36-P58 Medium Low-High B-0.0003 0.0003 L

Heavy High B-0.0000 Line to Line 0.0002 T P36 P58 B-0.0002 0.0002 L

Stationary

Shaft Normal Low-High B-0.0002 0.0002 l 0.0000 See Rotating Housing B-0.0004 0.0004 L

Operating Conditions Shaft Diameter Average Fit Fit Range Radial Clearance Range

Housing Load Speed A3 A5 A7 A3 A5 A7 A3 A5 A7 Predominate

Radial Load

Predominate

Thrust Load

Stationary

Shaft

Light to

Heavy

Low to

High

D +/- 0.0002,

D - 0.0000 0.00025 L 0.0002 L 0.0000 to 0.0000 to See Rotating Housing 0.0005 L 0.0004 L

Rotating

Housing

Light Low-to

High

D-0.0001 D-0.0000 0.0005 T Line to Line 0.0002 L to 0.0002 L to P36 P58 D-0.0003 D-0.0002 0.0003 T 0.0002 T

Medium to

Heavy

Low-to

High

D-0.0002 D-0.0001 0.0015 T 0.0001 T 0.0001 L to 0.0001 L to P36 P58 D-0.0004 D-0.0003 0.0004 T 0.0003 T

Shaft Fits (Miniature and Instrument Bearings - Values in inches)

A3, A5, A7 = ABEC 3, 5 & 7

B = Normal Bearing Bore: L = Loose, T = Tight

P25 = 0.0002” to 0.0005”

P36 = 0.0003” to 0.0006”

P58 = 0.0005” to 0.0008”

Housing Fits (Miniature and Instrument Bearings - Values in inches)

D = Nominal Bearing OD: L = Loose, T = Tight

Load Evaluation

Speed Evaluation

Light Load: Where C (Dynamic Load Rating) / P (Equivalent Radial Load) = less than 25

Medium Load: C/P is between 15 and 25

Heavy Load: C/P is greater than 15

Low Speed: Less than 5000 RPM

High Speed: Above 1500 RPM for Bearings over 3/8” OD

High Speed: Above 3000 RPB with OD’S below 3/8” OD

For additional detail, contact PTI Engineering

*For closer running accuracy or reduced axial play P13 (0.0001 to 0.0003) may be used provided that the fit of the outer ring is line

to line or looser

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 320 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Technical Data

Engineering, Fits & Tolerances

ABEC Tolerances

Grades 1, 3, 5 & 7

Bore Diameter Bore Tolerance

(+0.000) inch

Radial Runout

(inch)

Width Tolerance

(+0.000) inch

Max Width

Variation (inch)

Max Ref Runout

with Bore (inch)

Max Groove Runout

with Ref Side

(inch)

Max Bore 2-Point

Out-of-round

(inch)

Max Bore

Taper (inch)

mm Inch ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC

Over Incl. Over Incl. 5 7 5 7 5 7 5 7 5 7 5 7 5 7 5 7

0 10 0 0.3937 -0.0002 -0.0002 0.00015 0.0001 -0.0010 -0.0010 0.0002 0.0001 0.0003 0.0001 -0.0003 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001

10 18 0.3937 0.7078 -0.0002 -0.0002 0.00015 0.0001 -0.0010 -0.0010 0.0002 0.0001 0.0003 0.0001 -0.0003 -0.0010 -0.0010 -0.0010 -0.0010 -0.0010

18 30 0.7078 1.1811 -0.0002 -0.0002 0.00015 0.00015 -0.0010 -0.0010 0.0002 0.0001 0.0003 0.00015 -0.0003 -0.00015 -0.0010 -0.0010 -0.0010 -0.0010

30 50 1.1811 1.9685 -0.0002 -0.0002 0.0002 0.00015 -0.0010 -0.0010 0.0002 0.0001 0.0003 0.00015 -0.0003 0.00015 — — — —

50 80 1.9685 3.1496 -0.0003 -0.0002 0.0002 0.0002 -0.0015 -0.0015 0.0002 0.00015 0.0003 0.0002 -0.0003 -0.00015 — — — —

80 120 3.1496 4.7244 -0.0003 -0.0003 0.00025 0.0002 -0.0015 -0.0015 0.0003 0.00015 0.0004 0.0002 -0.0004 -0.0002 — — — —

Outer Diameter OD Tolerance

(+0.000) inch

Radial Runout

(inch)

Width Tolerance

(+0.000) inch

Flange Width

Tolerance

(+0.000) inch

Flange Dia

Tolerance

(+0.000) inch

mm Inch ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC

Over Incl. Over Incl. 1 3 1 3 1 3 1 3 1 3

0 18 0 0.7078 -0.0003 -0.0003 0.0006 0.0004 -0.005 -0.005 -0.002 -0.002 -0.002 -0.002

18 30 0.3937 1.1811 -0.0004 -0.0003 0.0006 0.0004 -0.005 -0.005 -0.002 -0.002 -0.002 -0.002

30 50 0.7078 1.9685 -0.0005 -0.0003 0.0008 0.0004 -0.005 -0.005 -0.002 -0.002 -0.002 -0.002

50 80 1.1811 3.1496 -0.0005 -0.0004 0.0010 0.0005 -0.005 -0.005 ————

80 120 1.9685 4.7244 -0.0006 -0.0004 0.0014 0.0007 -0.005 -0.005 ————

120 150 4.724 5.9055 -0.0008 -0.0005 0.0016 0.0008 -0.005 -0.005 ————

Bore Diameter Bore Tolerance

(+0.000) inch

Radial Runout

(inch)

Width Tolerance

(+0.000) inch

mm Inch ABEC ABEC ABEC ABEC ABEC ABEC

Over Incl. Over Incl. 1 3 1 3 1

0 10 0 0.3937 -0.0003 -0.0002 0.0003 0.0002 -0.0005 -0.005

10 18 0.3937 0.7078 -0.0004 -0.0002 0.0004 0.0003 -0.0005 -0.005

18 30 0.7078 1.1811 -0.0004 -0.0002 0.0005 0.0003 -0.0005 -0.005

30 50 1.1811 1.9685 -0.0005 -0.0003 0.0006 0.0004 -0.0005 -0.005

50 80 1.9685 3.1496 -0.0006 -0.0004 0.0008 0.0004 -0.0006 -0.006

80 120 3.1496 4.7244 -0.0008 -0.0005 0.001 0.0005 -0.0008 -0.008

Inner Ring Tolerances (ABEC 1 and 3)

Outer Ring Tolerances (ABEC 1 and 3)

Inner Ring Tolerances (ABEC 5 and 7)

Outer Ring Tolerances (ABEC 5 and 7)

Outer Diameter OD Tolerance

(+0.000) inch

Max Radial

Runout

(inch)

Width Tolerance

(+0.000) inch

Max Width

Variation (inch)

Max Outside

Cylindrical Surface

Runout with

Reference Side

Flange Width

Tolerance

(+0.000) inch

Flange Dia

Tolerance

(+0.000) inch

Max OD 2-Point

Out-of-round

(inch)

Max Groove

Runout with

Ref Side

(inch)

mm Inch ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC ABEC

Over Incl. Over Incl. 5 7 5 7 5 7 5 7 5 7 5 7 5 7 5 7 5 7

0 18 0 0.7078 -0.0002 -0.0002 0.0002 0.00015 -0.001 -0.001 0.0002 0.0001 0.0003 0.00015 -0.0020 0.002 -0.001 -0.001 0.0001 0.0001 0.0003 0.0002

18 30 0.3937 1.1811 -0.0002 -0.0002 0.0002 0.0015 -0.001 -0.001 0.0002 0.0001 0.0003 0.00015 -0.0020 0.002 -0.001 -0.001 0.0001 0.0001 0.0003 0.0002

30 50 0.7078 1.9685 -0.0002 -0.0002 0.0002 0.00015 -0.001 -0.001 0.0002 0.0001 0.0003 0.00015 -0.0020 0.002 -0.001 -0.001 0.0001 0.0001 0.0003 0.0002

50 80 1.1811 3.1496 -0.0003 -0.0002 0.0003 0.0002 -0.0015 -0.001 0.0002 0.00015 0.0003 0.00015 — — — — 0.0004 0.0002

80 120 1.9685 4.7244 -0.0003 -0.0003 0.0004 0.0002 -0.0015 -0.015 0.0003 0.0002 0.0003 0.0002 — — — — 0.0005 0.0002

120 150 4.724 5.9055 -0.0004 -0.0004 0.0005 0.0003 -0.0015 -0.015 0.0003 0.0003 0.0004 0.0002 — — — — 0.0005 0.0003

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 321 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Deep Groove Radial Ball Bearings

Selection and Application

Loads

Normal Clearance Co C3 Clearance C4 Clearance

Fa/Co e X Y e X Y e X Y

0.025 0.22 0.56 2.00 0.31 0.46 1.75 0.4 0.44 1.42

0.04 0.24 0.56 1.80 0.33 0.46 1.62 0.42 0.44 1.36

0.07 0.27 0.56 1.60 0.36 0.46 1.46 0.44 0.44 1.27

0.13 0.31 0.56 1.40 0.41 0.46 1.30 0.48 0.44 1.16

0.25 0.37 0.56 1.20 0.46 0.46 1.14 0.53 0.44 1.05

0.5 0.44 0.56 1.00 0.54 0.46 1.00 0.56 0.44 1.00

Bore Normal Co C3 C4

d (mm) min max min max min max

over incl. (in) (in) (in) (in) (in) (in)

2.5 10 0.0001 0.0005 0.0003 0.0009 0.0006 0.0011

10 18 0.0001 0.0007 0.0004 0.0010 0.0007 0.0013

18 24 0.0002 0.0008 0.0005 0.0011 0.0008 0.0014

24 30 0.0002 0.0008 0.0005 0.0011 0.0009 0.0016

30 40 0.0002 0.0008 0.0006 0.0013 0.0011 0.0018

40 50 0.0002 0.0009 0.0007 0.0014 0.0012 0.0020

50 65 0.0003 0.0011 0.0009 0.0017 0.0015 0.0024

65 80 0.004 0.0012 0.0010 0.0020 0.0018 0.0028

80 100 0.0005 0.0014 0.0012 0.0023 0.0021 0.0033

100 120 0.0006 0.0016 0.0014 0.0026 0.0024 0.0038

120 140 0.0007 0.0019 0.0016 0.0032 0.0028 0.0045

140 160 0.0007 0.0021 0.0018 0.0036 0.0032 0.0051

Calculation/Formula Factors for Deep Groove Ball Bearings

Internal Radial Clearance of Deep Groove Ball Bearings

Equivalent dynamic loads for single bearings:

P = Fr when Fa / Fr ≤ e

P = XFr + YFa when Fa / Fr > e

Where: P = Equivalent dynamic bearing load

Fr = radial load acting on the bearing

Fa = axial load acting on the bearing

X, Y and e = factors from Table 1 below.

Use the Basic Static Load Rating Co

with known Radial (Fr) and Axial (Fa)

loads to determine X, Y and e for use

in the Equivalent Dynamic Load formula. For loads that are extremely

light, or involve extreme temperatures, moist environments or other

conditions, please contact PTI Engineering.

Axial Load

Fa

Radial Load

Fr

Co = Basic Static Load Rating

Table 1

Table 2

General Information:

Most Radial Ball Bearings are installed on the shaft with a light press

fit. Installation can be accomplished by warming the bearings to

enlarge the bore and/or cooling the shaft to facilitate this step of

installation. The resulting shrink or press fit to the shaft eliminates

unwanted clearance between the bore and the shaft to allow the

smoothest operation possible. Contact PTI for additional

recommendations on fits to shafts or to housings.

Applications requiring bearings with low noise, higher speed ratings,

low drag seals, custom lubricants or corrosion resistant coatings and

other features are possible. PTI can also provide sub assemblies

involving other related or integral components and kit such items to

simplify sourcing and production requirements.

Bearings for Electric Motors (EM rated), are also available on request.

These units will include markings noting the product features and

qualifications.

There are many factors and considerations that will help determine the

optimal bearing choice. System requirements involving space, loads,

alignment, speed, vibration, internal clearances, axial expansion,

installation, optimized sealing, lubrication and more can all be considered to select the right bearings. PTI engineers can help recommend

or verify selections to optimize the system design for bearing capability and cost.

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 322 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

R Series

Precision Inch Type

Part No.

2 Shields

Part No.

2 Seals

d

(in)

D

(in)

Open Width

B (in)

Sealed

B (in)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

R2-ZZ R2-2RS 0.1250 0.3750 0.1562 0.1562 142 46 56000 0.0031

R2A-ZZ R2A-2RS 0.1250 0.5000 0.1719 0.1719 144 48 53000 0.0075

R3-ZZ R3-2RS 0.1875 0.5000 0.1562 0.1960 293 103 43000 0.0057

R4-ZZ R4-2RS 0.2500 0.6250 0.1960 0.1960 333 131 38000 0.0099

R4A-ZZ R4A-2RS 0.2500 0.7500 0.2188 0.2812 525 190 36000 0.0161

R6-ZZ R6-2RS 0.3750 0.8750 0.2188 0.2812 749 301 32000 0.0187

R8-ZZ R8-2RS 0.5000 1.1250 0.2500 0.3125 1149 511 27000 0.0392

R10-ZZ R10-2RS 0.6250 1.3750 0.2812 0.3438 1585 735 21000 0.0807

R12-ZZ R12-2RS 0.7500 1.6250 0.3125 0.4375 2477 1177 17000 0.1043

R14-ZZ R14-2RS 0.8750 1.8750 0.3175 0.5000 2658 1307 16000 0.1720

R16-ZZ R16-2RS 1.0000 2.0000 0.3750 0.5000 2652 1307 15000 0.1918

R18-ZZ R18-2RS 1.1250 2.1250 0.3750 0.5000 3492 1817 14000 0.2006

R20-ZZ R20-2RS 1.2500 2.2500 0.3750 0.5000 3695 1986 14000 0.2249

R22-ZZ R22-2RS 1.3750 2.5000 0.4375 0.5625 4067 2247 11000 0.2320

R24-ZZ R24-2RS 1.5000 2.6250 0.4375 0.5625 4426 2446 10000 0.3091

OPEN 2RS ZZ

Note: Open units available upon request. **Max RPM based on light loads with shields and grease lubricated. For bearings with 2RS seals, multiply above Max RPM by 0.70 for sealed Max RPM, for Oil multiply above Max RPM by 1.2. Special grease and fill levels available on

request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 323 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

600 Series

Miniature and Extra Small

Open, Sealed, Shielded Single Row Type

PTI

Part No.

2 Shields*

PTI

Part No.

2 Seals *

d

(mm)

D

(mm)

Open

Width

B (mm)

Sealed

B (mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

624-ZZ 624-2RS 4 13 5 5 225 108 40000 0.007

625-ZZ 625-2RS 5 16 5 5 300 199 36000 0.011

635-ZZ 635-2RS 5 19 6 6 405 203 32000 0.02

606-ZZ 606-2RS 6 17 6 6 340 160 38000 0.011

626-ZZ 626-2RS 6 19 6 6 405 203 32000 0.018

686-ZZ 686-2RS 6 13 3.5 5 188 90 38000 0.005

607-ZZ 607-2RS 7 19 6 6 390 195 36000 0.026

627-ZZ 627-2RS 7 22 7 7 570 305 30000 0.029

608-ZZ 608-2RS 8 22 7 7 570 305 34000 0.26

628-ZZ 628-2RS 8 24 8 8 435 219 32000 0.033

688-ZZ 688-2RS 8 16 4 5 216 117 35000 0.007

609-ZZ 609-2RS 9 24 7 7 582 305 32000 0.032

629-ZZ 629-2RS 9 26 8 8 790 490 28000 0.044

OPEN 2RS ZZ

Note: Open units, Single Shielded units (-ZZ) and Single Sealed units (2-RS) available upon request. * Available in 400 Series Stainless Steel

from production. **Max speed based on light loads with shields. For grease filled units multiply the Max RPM by 0.7, for Oil Lube Units

multiply the Max RPM by 1.2. Special grease and fill levels available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 324 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

1600 Series

Commercial Inch Type

Part No.

2 Shields

Part No.

2 Seals

d

(in)

D

(in)

B

(in)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

1601-ZZ 1601-2RS 0.1875 0.6875 0.2500 294 146 47500 0.009

1602-ZZ 1602-2RS 0.2500 0.6875 0.2500 294 146 46000 0.014

1603-ZZ 1603-2RS 0.3125 0.8750 0.2812 464 228 36000 0.021

1604-ZZ 1604-2RS 0.3750 0.8750 0.2812 464 228 31000 0.019

1605-ZZ 1605-2RS 0.3125 0.9062 0.3125 464 228 34000 0.037

1606-ZZ 1606-2RS 0.3750 0.9062 0.3125 464 228 31000 0.048

1607-ZZ 1607-2RS 0.4375 0.9062 0.3125 400 229 28750 0.049

1614-ZZ 1614-2RS 0.3750 1.1250 0.3750 400 229 25000 0.077

1615-ZZ 1615-2RS 0.4375 1.1250 0.3750 400 229 23000 0.071

1616-ZZ 1616-2RS 0.5000 1.1250 0.3750 400 229 26000 0.066

1620-ZZ 1620-2RS 0.4375 1.3750 0.4375 600 354 22000 0.100

1621-ZZ 1621-2RS 0.5000 1.3750 0.4375 600 354 20000 0.106

1622-ZZ 1622-2RS 0.5625 1.3750 0.4375 600 354 19000 0.101

1623-ZZ 1623-2RS 0.6250 1.3750 0.4375 600 354 19500 0.088

1628-ZZ 1628-2RS 0.6250 1.6250 0.5000 738 454 17500 0.159

1630-ZZ 1630-2RS 0.7500 1.6250 0.5000 738 454 20000 0.143

1633-ZZ 1633-2RS 0.6250 1.7500 0.5000 738 454 16500 0.203

1635-ZZ 1635-2RS 0.7500 1.7500 0.5000 738 454 16500 0.187

1638-ZZ 1638-2RS 0.7500 2.0000 0.5625 1100 709 15000 0.265

1640-ZZ 1640-2RS 0.8750 2.0000 0.5625 1100 709 14000 0.247

1641-ZZ 1641-2RS 1.0000 2.0000 0.5625 1100 709 13000 0.221

1652-ZZ 1652-2RS 1.1250 2.5000 0.6250 1306 857 11000 0.463

OPEN 2RS ZZ

Note: Open Units available upon request. **Max RPM based on light loads with shields. For grease lubricated units multiply the Max RPM by 0.7,

for Oil lubricated units multiply the Max RPM by 1.2. Special grease and fill loads available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 325 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

6000 Series

Open, Sealed, Shielded Single Row Type

PTI

Part No.

2 Shields

PTI

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

6000-ZZ 6000-2RS* 10 26 8 790 432 31000 0.042

6001-ZZ 6001-2RS* 12 28 8 885 500 27000 0.049

6002-ZZ 6002-2RS* 15 32 9 970 560 23000 0.066

6003-ZZ 6003-2RS* 17 35 10 1180 680 21000 0.086

6004-ZZ 6004-2RS* 20 42 12 1620 1000 17000 0.152

6005-ZZ 6005-2RS* 25 47 12 1740 1110 15000 0.176

6006-ZZ 6006-2RS* 30 55 13 2290 1630 13000 0.258

6007-ZZ 6007-2RS* 35 26 14 2760 2020 11000 0.342

6008-ZZ 6008-2RS* 40 68 15 2900 2220 10000 0.423

6009-ZZ 6009-2RS* 45 75 16 3650 2910 9000 0.540

6010-ZZ 6010-2RS* 50 80 16 3750 3150 8000 0.575

6011-ZZ 6011-2RS* 55 90 18 4900 4100 8000 0.849

6012-ZZ 6012-2RS* 60 95 18 5100 4400 7000 0.915

6013-ZZ 6013-2RS* 65 100 18 5300 4750 7000 0.959

6014-ZZ 6014-2RS* 70 110 20 6600 5900 6000 1.330

6015-ZZ 6015-2RS 75 115 20 6850 6350 6000 1.410

6016-ZZ 6016-2RS 80 125 22 8200 7080 5000 1.906

6017-ZZ 6017-2RS 85 130 22 8540 7530 5000 1.971

6018-ZZ 6018-2RS 90 140 24 10115 8754 5000 2.589

6019-ZZ 6019-2RS 95 145 24 10450 9330 5000 2.688

6020-ZZ 6020-2RS 100 150 24 10450 9330 4000 2.776

6021-ZZ 6021-2RS 105 160 26 12365 11240 4000 3.503

6022-ZZ 6022-2RS 110 170 28 13700 12590 3700 4.362

6024-ZZ 6024-2RS 120 180 28 14390 13490 3300 4.626

6026-ZZ 6026-2RS 130 200 33 23000 22000 3100 6.950

OPEN 2RS ZZ

Note: Open units, Single Shielded units (-ZZ) and Single Sealed units (2-RS) available upon request. * Available in 400 Series Stainless Steel.

**Max RPM based on shielded, grease lube, light loads. For 2RS sealed units multiply Max RPM by 0.70 for approx limit guidelines. For

Oil lubricated units, multiply the Max RPM by 1.2. Special grease and fill levels available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 326 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

6200 Series

Open, Sealed, Shielded Single Row Radial Type

Part No.

2 Shields

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

6200-ZZ 6200-2RS* 10 30 9 935 510 24000 0.071

6201-ZZ 6201-2RS* 12 32 10 1050 595 22000 0.082

6202-ZZ 6202-2RS* 15 35 11 1340 775 20000 0.099

6203-ZZ 6203-2RS* 17 40 12 1660 985 17000 0.143

6204-ZZ 6204-2RS* 20 47 14 2200 1390 15000 0.234

6205-ZZ 6205-2RS* 25 52 15 2400 1560 13000 0.282

6206-ZZ 6206-2RS* 30 62 16 3350 2320 11000 0.439

6207-ZZ 6207-2RS* 35 72 17 4450 3150 9000 0.635

6208-ZZ 6208-2RS* 40 80 18 5050 3650 8000 0.807

6209-ZZ 6209-2RS* 45 85 19 5650 4150 8000 0.897

6210-ZZ 6210-2RS* 50 90 20 6050 4650 7000 1.020

6211-ZZ 6211-2RS* 55 100 21 7500 5850 6000 1.340

6212-ZZ 6212-2RS* 60 110 22 9050 7250 6000 1.730

6213-ZZ 6213-2RS 65 120 23 10228 7980 5000 2.180

6214-ZZ 6214-2RS 70 125 24 10790 8430 5000 2.370

6215-ZZ 6215-2RS 75 130 25 11465 9329 5000 2.610

6216-ZZ 6216-2RS 80 140 26 12588 9891 5000 3.130

6217-ZZ 6217-2RS 85 150 28 14387 11914 4000 3.990

6218-ZZ 6218-2RS 90 160 30 15960 13488 3700 4.800

6219-ZZ 6219-2RS 95 170 32 18658 15620 3500 5.840

6220-ZZ 6220-2RS 100 180 34 20900 17980 3300 6.990

6221-ZZ 6221-2RS 105 190 36 22930 20230 3100 8.260

6222-ZZ 6222-2RS 110 200 38 24730 22480 2900 9.870

6224-ZZ 6224-2RS 120 215 40 25180 22930 2700 11.79

6226-ZZ 6226-2RS 130 230 40 29000 28100 2500 12.89

6228-ZZ 6228-2RS 140 250 42 35000 32000 2300 16.50

Note:

OPEN 2RS ZZ

Open units, Single Shielded units (-ZZ) and Single Sealed units (2-RS) available upon request. * Available in 400 Series Stainless Steel.

**Max RPM based on light loads, shields and grease lubricated. For sealed units with grease, multiply Max RPM by 0.70. For Oil, multiply

Max RPM by 1.2. Special grease and fill levels available on request.

Part No.

2 Shields

Part No.

2 Seals

d

(in)

D

(in)

B

(in)

Dynamic

C (lbs)

Static

CO (lbs)

Max

RPM

Wt.

lbs

6201-ZZ-8 6201-2RS-8 1/2 1.26 0.39 1050 595 22000 0.082

6202-ZZ-10 6202-2RS-10 5/8 1.38 0.43 1340 775 20000 0.099

6203-ZZ-10 6203-2RS-10 5/8 1.57 0.47 1660 985 17000 0.143

6204-ZZ-12 6204-2RS-12 3/4 1.85 0.55 2200 1390 15000 0.234

Metric Bores

Inch Bores

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 327 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

6300 Series

Open, Sealed, Shielded Single Row Radial Type

Part No.

2 Shields

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

6300-ZZ 6300-2RS* 10 35 11 1430 825 22000 0.117

6301-ZZ 6301-2RS* 12 37 12 1740 1015 20000 0.132

6302-ZZ 6302-2RS* 15 42 13 1960 1180 17000 0.181

6303-ZZ 6303-2RS* 17 47 14 2345 1430 15000 0.254

6304-ZZ 6304-2RS* 20 52 15 2750 1715 14000 0.317

6305-ZZ 6305-2RS* 25 62 17 3650 2370 11000 0.511

6306-ZZ 6306-2RS* 30 72 19 4600 3150 10000 0.763

6307-ZZ 6307-2RS* 35 80 21 5750 4050 9000 1.010

6308-ZZ 6308-2RS* 40 90 23 7050 5050 8000 1.400

6309-ZZ 6309-2RS* 45 100 25 9150 6800 7000 1.840

6310-ZZ 6310-2RS* 50 110 27 10700 8100 6000 2.360

6311-ZZ 6311-2RS* 55 120 29 13100 10110 6000 3.040

6312-ZZ 6312-2RS* 60 130 31 14150 10800 5000 3.789

6313-ZZ 6313-2RS 65 140 33 15960 12590 5000 4.648

6314-ZZ 6314-2RS 70 150 35 17980 14150 5000 5.684

6315-ZZ 6315-2RS 75 160 37 19450 15950 4000 6.873

6316-ZZ 6316-2RS 80 170 39 21350 17980 4000 8.151

6317-ZZ 6317-2RS 85 180 41 21690 18660 4000 9.517

6318-ZZ 6318-2RS 90 190 43 23380 20230 4000 11.059

6319-ZZ 6319-2RS 95 200 45 24730 22480 3000 12.822

6320-ZZ 6320-2RS 100 215 47 28550 26970 3000 15.818

OPEN

2RS ZZ

Note: Open units, Single Shielded units (-ZZ) and Single Sealed units (2-RS) available upon request. * Available in 400 Series Stainless Steel.

**Max RPM based on shielded, grease lube and light loads. For 2RS sealed units, multiply the Max RPM by 0.70 for approx limit guidelines.

For Oil lubricated units, multiply the Max RPM above by 1.2. Special grease and fill levels available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 328 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

6900 Series

Open, Sealed, Shielded Single Row Radial Type

Part No.

2 Shields

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

6900-ZZ 6900-2RS* 10 22 6 605 285 34000 0.02

6901-ZZ 6901-2RS* 12 24 6 650 330 30000 0.02

6902-ZZ 6902-2RS* 15 28 7 970 475 27000 0.04

6903-ZZ 6903-2RS* 17 30 7 1030 580 22000 0.04

6904-ZZ 6904-2RS* 20 37 9 1430 825 18000 0.08

6905-ZZ 6905-2RS* 25 42 9 1580 1020 16000 0.09

6906-ZZ 6906-2RS* 30 47 9 1630 1130 14000 0.11

6907-ZZ 6907-2RS* 35 55 10 2150 1670 11000 0.16

6908-ZZ 6908-2RS* 40 62 12 3080 2245 10000 0.24

6909-ZZ 6909-2RS* 45 68 12 3180 2400 9000 0.28

6910-ZZ 6910-2RS* 50 72 12 3275 2750 8500 0.29

Note:

OPEN 2RS ZZ

Open units, Single Shielded units (-ZZ) and Single Sealed units (2-RS) available upon request. * Available in 400 Series Stainless Steel.

**Max RPM based on light loads, shields and grease lubricated. For sealed units with grease, multiply Max RPM by 0.70. For Oil, multiply

Max RPM by 1.2. Special grease and fill levels available on request.

Larger Sizes available on request.

Metric Bores

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 329 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

5200 Series

Double Row Angular Contact Type

Note:

Part No.

2 Shields

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

5200-ZZ 5200-2RS 10 30 14.287 1200 755 16000 0.108

5201-ZZ 5201-2RS 12 32 15.875 1580 1030 15000 0.126

5202-ZZ 5202-2RS 15 35 15.875 1740 1180 12000 0.141

5203-ZZ 5203-2RS 17 40 17.462 2210 1540 10000 0.212

5204-ZZ 5204-2RS 20 47 20.638 3300 2410 9000 0.337

5205-ZZ 5205-2RS 25 52 20.638 3550 2710 8000 0.386

5206-ZZ 5206-2RS 30 62 23.812 4950 3900 7000 0.631

5207-ZZ 5207-2RS 35 72 26.988 6550 5300 6000 0.961

5208-ZZ 5208-2RS 40 80 30.162 7400 6100 6000 1.300

5209-ZZ 5209-2RS 45 85 30.162 8300 6900 5000 1.410

5210-ZZ 5210-2RS 50 90 30.162 8850 7700 5000 1.520

5211-ZZ 5211-2RS 55 100 33.338 9180 8490 4000 2.460

5212-ZZ 5212-2RS 60 110 36.512 13700 13200 4000 3.140

5213-ZZ 5213-2RS 65 120 38.100 14900 14700 4000 4.220

5214-ZZ 5214-2RS 70 125 39.688 16200 16000 3000 4.540

5215-ZZ 5215-2RS 75 130 41.275 17700 17100 3000 5.460

5216-ZZ 5216-2RS 80 140 44.450 18620 17900 3000 6.560

Shielded, Open, Snap Ring Type (NR) available upon request. ** Max RPM based on light loads, grease lube, with shields or seals. For Oil

lubricate, multiply the Max RPM by 1.35. Special grease and fill levels available on request

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 330 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Radial Ball Bearings

5300 Series

Double Row Angular Contact Type

Note:

Part No.

2 Shields

Part No.

2 Seals

d

(mm)

D

(mm)

B

(mm)

Dynamic

C (lbs)

Static

CO (lbs)

Max**

RPM

Wt.

lbs

5300-ZZ 5300-2RS 10 35 19.050 1450 1280 10000 0.21

5301-ZZ 5301-2RS 12 37 19.050 1640 1400 10000 0.23

5302-ZZ 5302-2RS 15 42 19.050 1880 1560 10000 0.29

5303-ZZ 5303-2RS 17 47 22.225 2200 1940 10000 0.43

5304-ZZ 5304-2RS 20 52 22.225 2800 2350 9000 0.52

5305-ZZ 5305-2RS 25 62 25.400 8110 4360 8000 0.75

5306-ZZ 5306-2RS 30 72 30.163 10200 5720 6000 1.13

5307-ZZ 5307-2RS 35 80 34.925 12700 7340 6000 1.75

5308-ZZ 5308-2RS 40 90 36.513 15600 9170 5000 2.31

5309-ZZ 5309-2RS 45 100 39.688 18700 11200 5000 3.13

5310-ZZ 5310-2RS 50 110 44.450 23700 14600 4000 4.25

5311-ZZ 5311-2RS 55 120 49.213 27400 17200 4000 5.06

5312-ZZ 5312-2RS 60 130 53.975 31300 19900 3000 6.96

5313-ZZ 5313-2RS 65 140 58.738 35500 22900 3000 8.61

5314-ZZ 5314-2RS 70 150 63.500 39800 26000 3000 10.80

5315-ZZ 5315-2RS 75 160 68.263 43600 29300 3000 12.10

5316-ZZ 5316-2RS 80 170 68.263 47200 32800 2000 15.00

Shielded, Open, Snap Ring Type (NR) available upon request. **Max RPM based on light loads, grease lube, with shields or sealed. For

Oil lubricated units, multiply the Max RPM by 1.3. Special grease and fill levels available on request.

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 331 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Roller Bearings

Eich Roller Bearings, manufactured in

Germany, are well respected for their

ability to function in elevated temperatures while under heavy loads and

severe environments. The BR Series

spring wound, high load, high-impact

solid roller design is ideally suited for

foot rolls (upper segment) of continuous

casters for steel mills. They are generally used on billet, slab, bloom or beam

blank casters. The basic design consists of an inner spring-wound race, a

set of cylindrical rollers capable of heavy

radial loads and an outer spring wound race. Thrust rings on each end

help contain and handle thrust. No other bearing offers these features

with such load carrying flexibility. The spring wound races expand and

contract naturally over a wide temperature range, yet stay tight on the

shaft and within the roll on which they are assembled. The BR Series is

designed to accommodate 350°C (600°F) temperatures. The wound coil

provides a pathway for contaminants to escape. The compact design

and simple installation make them ideally suited for such high temp

applications and harsh environments.

The B Series Bearings with spiral wound

rollers and flexible wound races allow the

most extreme operating temperatures

600°C (1000°F). One version used in Tunnel Furnaces is manufactured exclusively

from spring strip steel. They can with

stand temperatures in excess of 450°C and

absorb impacts that occur from billets or

slabs contacting the rolls. A second variation has been adopted for the furnace car

wheel, for example, and capable of temperatures that exceeding 500°C. These

are essentially cylindrical roller bearings

made of high-temperature roller bearing

steel. The design of the bearings will adapt

to these extreme ambient conditions to eliminate the need for frequent

bearing replacement as is often the case with bronze bushed designs.

So both the solid or flexible roller designs with spring wound bearing

races are capable compact designs with a low sensitivity to contaminants. They are easy to install and require no heating of components.

Installation: Spanner wrenches of different shapes for inner and outer

races, allow the installer to expand (unwind) the inner race or tighten (wind-up)

the outer race, to slip inner ring onto shafts

or slide outer races into housing rolls.

Bearings are installed at room temperatures, so no cooling of shafts or handling

hot bearings. Wrenches are provided with

new orders to make installation/training

simple.

Additionally, an installation/training CD is also provided to demonstrate

the simple procedures for both installation and

removal, for inspection or for replacement procedures. Often times, B and BR Series bearings can

be re-furbished and re-used, proper inspection and

evaluation techniques are demonstrated, saving

costly down time.

Eich Guide Rollers use the solid BR-Series

roller design and allow re-lubrication from the

shaft ends and easy installation and removal.

Guide rolls specifications are generally provide by

the customer. Standards do not exist. So custom

units are normally designed from customer

requirements and close dialogue on application

requirements.

Water-Cooled Split Bearings are designed

to handle extreme loads at elevated temperatures. The races are horizontally split

and allow simple roller and race replacement without moving the equipment or rolls

on which they are mounted. A classic application is a driven strand guide rollers on a

continuous caster.

Water Cooled Split Bearings are manufactured like standard bearings, i.e. turned,

heat treated and ground. The final step is

the splitting of the race by wire-cut EDM,

which is a non-abrasive, precise operation. Each unit under goes a full

assembly and test fit prior to release. The full compliment of rollers (no

cage = allows the maximum number of rollers) which provides the highest rating possible. The water cooling feature will maintain a safe bearing operating temperature while providing maximum support to the rolls.

The cooling water flows around the exterior jacket of the housing allowing the bearing to function in the most severe ambient temperatures.

Water inlets and outlets are provided in the base of the housing. Water

cooled units are available for shaft sizes from 65mm thru 265mm.

SACRB Bearings: Eich also manufacturers SACRB type bearings

(Self Aligning Cylindrical Roller Bearing). This unit combines the load

carrying ability of a cylindrical bearing

and the misalignment features of a

spherical bearings. Together with

expansion (float) capability, this bearing

is one of the most versatile and capable

units available. The floating unit consists of an inner race, a set of rollers and

two outer races. The fixed bearing is

supplied with two thrust rings. SACRB

units are fully interchangeable with the

toroidal roller (CARB) bearings. SACRB

bearings include a full compliment of

cylindrical rollers in a spherical shell with

a cylindrical OD. This bearing will allow

axial expansion and angular alignment

all in one compact unit. The load capability of this bearing is extremely high, well beyond a comparable spherical roller bearings, due to the full compliment (maximum number

possible) and extra wide rollers for the maximum load rating. SACRB

Bearings are available for driven or non driven rolls. They allow higher

loads than equivalent CARB Bearings. SACRB are typically have a

10 to 25% higher rating than a comparable CARB bearing and typically 20 to 30% above the similarly sized Spherical bearings.

Size Range: Eich bearings are available for 25mm shaft sizes and up

to outer diameters of 600mm and anything between. Eich Bearings are

well respected in the industry for being a leader in these customized,

uniquely featured and highly capable spring wound bearings.

BR Series—Solid Roller

B Series—Flexible Roller

Spanner Wrenches f or B & BR

Series Installation

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 332 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Roller Bearings

Flexible Roller Chain Bearing is a

flexible bearing cage and not a drive

chain. This product was developed

to assist in easy installation in furnaces or waste incineration plants.

The bearing is used in elevated positions where its easy installation proves

to be a crucial advantage as the flexible

roller chain can be easily fitted around

the journals or races then joined.

Eich BR Series with Solid Rollers

Eich B Series with Flexible Rollers

Typical caster foot roll (Uses 2 BR Series

Bearings) and re-lube via shaft center

Water Cooled Split Bearings

Split Bearing Components

Eich Split Water Cooled Bearing on center Guide Roll

SACRB Bearings:

SACRB Bearings are applied in pairs, one fixed and one

float unit per

shaft. The fixed

Bearing can handle thrust, fixing

the roll position,

while the float

bearing allows

for expansion

from the thermal growth of the shaft. Consult PTI for additional information on SACRB Units.

• Bearings for Extreme Conditions

• Spring Steel Coil Design - Expands with Temperature

Changes and Improves Bearing Life

• Low Maintenance Costs

• Reduced Down Time

Fixed Construction Float Construction

www.eichrollenlager.de

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 333 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

Rod ends are available in a variety of types, sizes, materials and features. PTI stocks the popular versions for immediate delivery. Stock types at PTI are indicated on the following pages. Non-stock items are normally readily available from our warehouse in Europe. Custom types including high performance and hydraulic types are also available on request.

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 334 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Spherical Plain Bearings DIN ISO

12240-1 with / without outer ring

Hydraulic Rod End

DIN 812-8.8

Corrosion Protection Accessories

Metric Rod Ends

GE..EC Type

Maintenance Free

Steel on PTFE Liner

6-300mm Bores

Hi Unidirectional Loads

FPR..U Type

Regreasable

Steel on Steel, GE..E

20-120mm Bores

For Short Relay Distances

and Maximum Stroke.

RERS & RELS Type

Neoprene Protector Caps

Protects against Dust &

Chemicals

EI..(-2RS) Type

Steel on Steel

Regreasable

Zinc Plated

6-80mm Bores

Compact

Hi Multi-directional Loads

EI..D Type

Maintenance Free

Zinc Plated

6-80mm Bores

Compact

Hi Unidirectional Loads

EI..D SS Type

Stainless Steel (Niro)

Maintenance Free

6-80mm Bores

Compact

Hi Unidirectional Loads

GI Type

Standard

Regreasable

Zinc Plated

5-25mm Bores

Suited For Axial Loads

GIS…GIXS…GIRS... Type

Heavy Duty

Regreasable

Zinc Plated

2-50mm Bores

High Speed

GISW... GIXSW...

GIRSW...Type

Heavy Duty

Maintenance Free

5-50mm Bores

OK for Dynamic Loads

EA..(-2RS) Type

Steel on Steel

Regreasable

Zinc Plated

6-80mm Bores

Compact

Hi Multi-directional Loads

EA..D Type

Maintenance Free

Zinc Plated

6-80mm Bores

Compact

Hi Unidirectional Loads

EA..D SS Type

Stainless Steel (Niro)

Maintenance Free

6-80mm Bores

Compact

Hi Unidirectional Loads

GA Type

Standard

Regreasable

Zinc Plated

5-25mm Bores

Suited For Axial Loads

GAS…GAXS…GARS...Type

Heavy Duty

Regreasable

Zinc Plated

2-50mm Bores

High Speed

GASW... GAXSW...

GARSW...Type

Heavy Duty

Maintenance Free

5-50mm Bores

OK for Dynamic Loads

Shaded units = indicates most sizes are stock. All others available from European warehouse.

Internal Threads

DIN ISO 12240-4

External Threads

DIN ISO 12240-4

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 335 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Rod Ends

Technical / Selection Information

Static Load Ratings C0

C0 is the max permissible Static Load that a Rod End can withstand without causing permanent distortion or damage. The

Static Load is also used to establish the maximum axial (thrust)

load during misalignment where: Fr = Radial Load,

Fa = Axial or Thrust Load.

Dynamic Load Ratings Cn

Dynamic Load Ratings are used to establish the working life of

spherical plain bearings or rod ends under Dynamic Load

conditions. Use equivalent load factors below.

For Variable Loads, PTI recommends using the max load for

sizing / selection purposes.

Thermal & Load Type Service Factors

Rod Ends or Spherical Bearings that must operate in elevated

temperatures or in load conditions that could be harsh, a

service factor must be applied to insure proper sizing or

selection. Use the factors and formula below to determine the

max loads suggested.

Temperature Factor (fT)

Load Type Service Factor (fB)

Use the following formula to determine the max allowable load.

Fr (max) = C0

.

fT .

fB

also Fa (max) = a .

Fr (max)

If no bearing load is known in the application, the required Static

Load Rating can be determined using the same formula rewritten for the Static Load:

C0 (req) Fr

fB .

fT

For an expected Life Calculation, many factors contribute and

an approximation is the general result, experience is also a

good reference. For more details contact PTI.

Fa (max) = a .

C0 where:

a = 0.5 for GI or GA Types

a = 03 for All Others

Temperature 80C (175°F) 100C(212°F) 150C (300°F) 200C (392°F) 250C (480°F)

Maintenance

Free 1 1 1 0.8 0.5

Re-Lube Type 1 1 0.8 0.5 0.3

Load Type fB

Steady / Uniform 1.0

Light Shock / Variable 0.5

Fa

Fr

.1 .2 .3 .4 .5

y .8 1 1.5 2.5 3

Shaft and Housing Fit

Threads: Standard Metric ISO, DIN 13, Tolerance h6.

Misalignment Capability: See Individual Products.

Internal Clearance

Lubrication

Maintenance Free Rod Ends and Spherical Plain Bearings do

not require lubrication. The Ball is supported by a PTFE Liner in

the housing. Rod Ends are available with regreasable options

on request. For GE Type Bearings that can be lubricated we

recommend Re-Greasing with a Lithium Grease with a Moly

Disulfide Additive.

Temperature Range

Type Bore

Tolerance

Shaft

Tolerance

Bearing OD

Tolerance

Housing Fit

Tolerance

G..Type H7 g6 h6 J7

E..Type H7 g7 h5 J57

Type Size Radial Internal

Clearance in mm (min/max)

EI..D / EA..D 06 - 12 0.000 - 0.030

EI..D - NIRO 15 - 20 0.000 - 0.040

EA..D - NIRO 25 - 35 0.000 - 0.050

40 - 60 0.000 - 0.055

70 - 80 0.000 - 0.060

GISW / GASW 05 - 10 0.005 - 0.030

GIXSW / GAXSW 12 - 18 0.005 - 0.035

GIRSW / GARSW 20 - 25 0.005 - 0.045

30 - 40 0.005 - 0.055

GE..EC 06 - 12 0.032 - 0.068

15 - 20 0.040 - 0.082

25 - 35 0.050 - 0.100

40 - 60 0.060 - 0.120

70 - 80 0.072 - 0.142

GL 02 - 10 0.005 - 0.040

12 - 18 0.010 - 0.050

20 - 25 0.015 - 0.060

30 - 40 0.015 - 1.075

GI / GA 02 - 10 0.005 - 0.035

GIS / GAS 12 - 20 0.010 - 0.040

GIRS / GARS 22 - 44 0.010 - 0.050

SERIES SURFACES T (°C ) T (°F )

G..Type

GISW / GASW

GIRSW / GARSW

Steel on PTFE -50° TO 200° -58° TO 392°

E..Type

EA..D / EI..D

EA..D-NIRO / EI..D-NIRO

Steel on PTFE -50° TO 200° -58° TO 392°

G..Type

GE..EC Steel on PTFE -50° TO 200° -58° TO 392°

y factor

Feq = Fr

+ y • Fa

Fr

= Radial Load

Fa = Axial Load

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 336 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GI Type

Standard Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand - Internal Threads

Suited for Axial Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

a° Wt.

B M A F L K J O SW G GL g

GI 5 GIL 5 5 8 6.00 18 27 36 11 9.0 7.7 9 M5 x 0.8 10 9.9 2.5 900 13 18

GI 6 GIL 6 6 9 6.75 20 30 40 13 10.0 8.9 11 M6 x 1 12 11.9 3.2 760 13 27

GI 8 GIL 8 8 12 9.00 24 36 48 16 12.5 10.4 13 M8 x 1.25 16 17.1 5.4 620 14 46

GI 10 GIL 10 10 14 10.50 28 43 57 19 15.0 12.9 17 M10 x 1.5 20 21.4 7.5 500 13 76

GI 12 GIL 12 12 16 12.00 32 50 66 22 17.5 15.4 19 M12 x 1.75 22 27.0 10.0 450 13 115

GI 14 GIL 14 14 19 13.50 36 57 75 25 20.0 16.8 22 M14 x 2 25 24.5 13.0 360 16 170

GI 16 GIL 16 16 21 15.00 42 64 85 27 22.0 19.3 22 M16 x 2 28 37.0 16.0 350 15 230

GI 18 GIL 18 18 23 16.50 46 71 94 31 25.0 21.8 27 M18 x 1.5 32 43.0 19.5 320 15 320

GI 20 GIL 20 20 25 18.00 50 77 102 34 27.5 24.3 32 M20 x 1.5 33 49.5 23.5 280 14 415

GI 22 GIL 22 22 28 20.00 54 84 111 37 30.0 25.8 32 M22 x 1.5 37 57.0 29.0 250 15 540

GI 25 GIL 25 25 31 22.00 60 94 124 42 33.5 29.6 36 M24 x 2 42 68.0 35.0 230 15 750

Housing: Sizes 5-12 turned from free-cutting steel to 9SMnPb28K,

12L13, sizes 14 and up are forged from heat-treated steel to C22,

M1023

Insert: Special brass to CuZn40AI1

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

GA Type

Standard Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand - External Threads

Suited for Axial Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L O G GL g

GA 5* GAL 5* 5 8 6.00 18 33 42 7.7 M5 x .08 20 4.3 2.5 900 13 13

GA 6 GAL 6 6 9 6.75 20 36 46 8.9 M6 x 1 22 6.0 3.2 760 13 20

GA 8 GAL 8 8 12 9.00 24 42 54 10.4 M8 x 1.25 25 11.0 5.4 620 14 33

GA 10 GAL 10 10 14 10.50 28 48 62 12.9 M10 x 1.5 29 17.4 7.5 500 13 56

GA 12 GAL 12 12 16 12.00 32 54 70 15.4 M12 x 1.75 33 25.5 10.0 450 13 87

GA 14 GAL 14 14 19 13.50 36 60 78 16.8 M14 x 2 36 24.5 13.0 360 16 129

GA 16 GAL 16 16 21 15.00 42 66 87 19.3 M16 x 2 40 36.5 16.0 350 15 189

GA 18 GAL 18 18 23 16.50 46 72 95 21.8 M18 x 1.5 44 43.0 19.5 320 15 267

GA 20 GAL 20 20 25 18.00 50 78 103 24.3 M20 x 1.5 47 49.5 23.5 280 14 348

GA 22 GAL 22 22 28 20.00 54 84 111 25.8 M22 x 1.5 51 57.0 29.0 250 15 443

GA 25 GAL 25 25 31 22.00 60 94 124 29.6 M24 x 2 57 68.0 35.0 230 15 600

Housing: Sizes 5-12 turned from free-cutting steel to 9SMnPb28K, 12L13

Sizes 14 and up are forged from heat-treated steel to C22, M1023

Insert: Special brass to CuZn40AI1

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

Note: * Without grease fitting.

Models Available

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 337 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GIS Type

Heavy Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand - Internal Threads

Suited for High Speed Applications

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L K J O SW G GL g

GIS 2* GILS 2* 2 4.5 3.60 9 16 20.5 4.5 3.8 2.6 4.0 M2 x 0.4 7 3.0 1.1 — 16 3

GIS 3 GILS 3 3 6.0 4.50 14 21 27.0 6.5 5.0 5.1 5.5 M3 x 0.5 10 4.1 1.8 — 14 6

GIS 5 GILS 5 5 8.0 6.00 18 27 36.0 11.0 9.0 7.7 9.0 M5 x 0.8 10 8.0 3.3 — 13 18

GIS 6 GILS 6 6 9.0 6.75 20 30 40.0 13.0 10.0 8.9 11.0 M6 x 1 12 8.9 4.3 1500 13 27

GIS 8 GILS 8 8 12.0 9.00 24 36 48.0 16.0 12.5 10.4 13.0 M8 x 1.25 16 14.1 7.1 1200 14 46

GIS 10 GILS 10 10 14.0 10.50 28 43 57.0 19.0 15.0 12.9 17.0 M10 x 1.5 20 19.3 10.0 1000 13 76

GIS 12 GILS 12 12 16.0 12.00 32 50 66.0 22.0 17.5 15.4 19.0 M12 x 1.75 22 23.5 13.5 860 13 115

GIS 14 GILS 14 14 19.0 13.50 36 57 75.0 25.0 20.0 16.8 22.0 M14 x 2 25 21.0 17.0 750 16 170

GIS 16 GILS 16 16 21.0 15.00 42 64 85.0 27.0 22.0 19.3 22.0 M16 x 2 28 32.0 21.5 660 15 230

GIS 18 GILS 18 18 23.0 16.50 46 71 94.0 31.0 25.0 21.8 27.0 M18 x 1.5 32 38.5 26.0 600 15 320

GIS 20 GILS 20 20 25.0 18.00 50 77 102.0 34.0 27.5 24.3 32.0 M20 x 1.5 33 44.0 31.5 540 14 415

GIS 22 GILS 22 22 28.0 20.00 54 84 111.0 37.0 30.0 25.8 32.0 M22 x 1.5 37 53.0 38.0 500 15 540

GIS 25 GILS 25 25 31.0 22.00 60 94 124.0 42.0 33.5 29.6 36.0 M24 x 2 42 62.0 47.0 440 15 750

GIS 30 GILS 30 30 37.0 25.0 70 110 145.0 51.0 40.0 34.8 41.0 M30 x 2 51 82.0 64.0 370 17 1130

GIS 35 GILS 35 35 43.0 28.0 80 125 165.0 58.0 46.0 37.7 50.0 M36 x 2 56 101.0 80.0 330 19 1600

GIS 40 GILS 40 40 49.0 35.0 90 142 187.0 69.0 57.0 44.2 60.0 M42 x 2 60 124.0 116.0 290 16 2770

GAS Type

Heavy Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand - External Threads

Suited for High Speed Applications

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L O G GL g

GAS 2* GALS 2* 2 4.5 3.60 9 20 24.5 2.6 M2 x 0.4 12 0.6 1.1 — 16 3

GAS 3* GALS 3* 3 6.0 4.50 14 26 33.0 5.1 M3 x 0.5 15 1.5 1.8 — 14 6

GAS 5* GALS 5* 5 8.0 6.00 18 33 42.0 7.7 M5 x 0.8 20 4.3 3.3 — 13 13

GAS 6 GALS 6 6 9.0 6.75 20 36 46.0 8.9 M6 x 1 22 6.0 4.3 1500 13 20

GAS 8 GALS 8 8 12.0 9.00 24 42 54.0 10.4 M8 x 1.25 25 11.0 7.0 1200 14 33

GAS 10 GALS 10 10 14.0 10.50 28 48 62.0 12.9 M10 x 1.5 29 17.4 10.0 1000 13 56

GAS 12 GALS 12 12 16.0 12.00 32 54 70.0 15.4 M12 x 1.75 33 23.5 13.5 860 13 87

GAS 14 GALS 14 14 19.0 13.50 36 60 78.0 16.8 M14 x 2 36 21.0 17.0 750 16 129

GAS 16 GALS 16 16 21.0 15.00 42 66 87.0 19.3 M16 x 2 40 32.0 21.5 660 15 189

GAS 18 GALS 18 18 23.0 16.50 46 72 95.0 21.8 M18 x 1.5 44 38.5 26.0 600 15 267

GAS 20 GALS 20 20 25.0 18.00 50 78 103.0 24.3 M20 x 1.5 47 44.0 31.5 540 14 348

GAS 22 GALS 22 22 28.0 20.00 54 84 111.0 25.8 M22 x 1.5 51 53.0 38.0 500 15 443

GAS 25 GALS 25 25 31.0 22.00 60 94 124.0 29.6 M24 x 2 58 62.0 47.0 440 15 600

GAS 30 GALS 30 30 37.0 25.00 70 110 145.0 34.8 M30 x 2 71 82.0 64.0 370 17 1030

GAS 35 GALS 35 35 43.0 28.00 80 125 165.0 37.7 M36 x 2 73 101.0 80.0 330 19 1600

GAS 40 GALS 40 40 49.0 35.00 90 142 187.0 44.2 M42 x 2 78 124.0 116.0 290 16 2550

Note: * Without grease fitting.

Housing: Sizes 2-12 turned from free-cutting steel to 9SMnPb28K, 12L13

Sizes 14-40 are forged from heat-treated steel to C22, M1023

Size 50 is turned from heat-treated steel to C45, AISI 1045

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel to 100Cr6 AISI 52100, hardened, ground, polished

This series is also available sealed and with CETOP dimensions for Hydraulic Cylinders

Models Available

Note: * Without Grease Fitting. Size 50 available on request.

Housing: Sizes 2-12 turned from free-cutting steel to 9SMnPb28K, 12L13

Sizes 14-40 are forged from heat-treated steel to C22, M1023

Size 50 is turned from heat-treated steel to C45, AISI 1045

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel to 100Cr6, AISI 52100, hardened, ground, polished

This series is also available sealed and with CETOP dimensions for Hydraulic Cylinder

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 338 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GIXS Type

Extra Heavy Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand- Internal Threads

Suited for High Pressure and Tension Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L K J O SW G GL g

GIXS 6 GILXS 6 6 9 6.75 20 30 40 13 10.0 8.9 11 M6 x 1 12 16.7 4.3 1500 13 27

GIXS 8 GILXS 8 8 12 9.00 24 36 48 16 12.5 10.4 13 M8 x 1.25 16 25.5 7.1 1200 14 46

GIXS 10 GILXS 10 10 14 10.50 28 43 57 19 15.0 12.9 17 M10 x 1.5 20 34.8 10.0 1000 13 76

GIXS 12 GILXS 12 12 16 12.00 32 50 66 22 17.5 15.4 19 M12 x 1.75 22 42.0 13.3 860 13 115

GIXS 14 GILXS 14 14 19 13.50 36 57 75 25 20.0 16.8 22 M14 x 2 25 57.0 17.0 750 16 170

GIXS 16 GILXS 16 16 21 15.00 42 64 85 27 22.0 19.3 22 M16 x 2 28 67.5 21.5 660 15 230

GIXS 18 GILXS 18 18 23 16.50 46 71 94 31 25.0 21.8 27 M18 x 1.5 32 81.5 26.0 600 15 320

GIXS 20 GILXS 20 20 25 18.00 50 77 102 34 27.5 24.3 32 M20 x 1.5 33 93.5 31.5 540 14 415

GIXS 22 GILXS 22 22 28 20.00 54 84 111 37 30.0 25.8 32 M22 x 1.5 37 114.0 38.0 500 15 540

GIXS 25 GILXS 25 25 31 22.00 60 94 124 42 33.5 29.6 36 M24 x 2 42 135.0 47.0 440 15 750

GIXS 30 GILXS 30 30 37 25.00 70 110 145 51 40.0 34.8 41 M30 x 2 51 184.0 64.0 370 17 1130

GAXS Type

Extra Heavy Duty, Zinc Plated

Grease Fitting for Re-Lube

Right & Left Hand-External Threads

Suited for High Pressure and Tension Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L O G GL g

GAXS 6 GALXS 6 6 9 6.75 20 36 46 8.9 M6 x 1 22 9.8 4.3 1500 13 20

GAXS 8 GALXS 8 8 12 9.00 24 42 54 10.4 M8 x 1.25 25 19.5 7.1 1200 14 33

GAXS 10 GALXS 10 10 14 10.50 28 48 62 12.9 M10 x 1.5 29 31.4 10.0 100 13 56

GAXS 12 GALXS 12 12 16 12.00 32 54 70 15.4 M12 x 1.75 33 42.0 13.5 860 13 87

GAXS 14 GALXS 14 14 19 13.50 36 60 78 16.8 M14 x 2 36 57.0 17.0 750 16 129

GAXS 16 GALXS 16 16 21 15.00 42 66 87 19.3 M16 x 2 40 67.5 21.5 660 15 189

GAXS 18 GALXS 18 18 23 16.50 46 72 95 21.8 M18 x 1.5 44 81.5 26.0 600 15 267

GAXS 20 GALXS 20 20 25 18.00 50 78 103 24.3 M20 x 1.5 47 93.5 31.5 540 14 348

GAXS 22 GALXS 22 22 28 20.00 54 84 111 25.8 M22 x 1.5 51 114.0 38.0 500 15 443

GAXS 25 GALXS 25 25 31 22.00 60 94 124 29.6 M24 x 2 57 135.0 47.0 440 15 600

GAXS 30 GALXS 30 30 37 25.00 70 110 145 34.8 M30 x 2 71 184.0 64.0 370 17 1030

Note: * Without grease fitting.

Housing: Heat-treated 42CrMo4 steel, AISI 4140, forged

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

This series is also available sealed and with CETOP

(European Fluid Power Committee) dimensions for Hydraulic Cylinders

Models Available

Note: * Without Grease Fitting. Size 50 available on request.

Housing: Heat-treated 42CrMo4 steel, AISI 4140, forged

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

This series is also available sealed and with CETOP

(European Fluid Power Committee) dimensions for Hydraulic Cylinder

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 339 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GIRS Type

Stainless Steel

Grease Fitting for Re-Lube

Right & Left Hand - Internal Threads

Suited for Corrosive Environments

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L K J O SW G GL g

GIRS 3* GILRS 3* 3 6.0 4.50 14 21 27 6.5 5.0 5.1 5.5 M3 x 0.5 10 8.0 1.8 — 14 6

GIRS 5 GILRS 5 5 8.0 6.00 18 27 36 11.0 9.0 7.7 9.0 M5 x 0.8 10 11.8 3.3 1200 13 18

GIRS 6 GILRS 6 6 9.0 6.75 20 30 40 13.0 10.0 8.9 11.0 M6 x 1.0 12 13.1 4.3 1500 13 27

GIRS 8 GILRS 8 8 12.0 9.00 24 36 48 16.0 12.5 10.4 13.0 M8 x 1.25 16 20.7 7.1 1200 14 46

GIRS 10 GILRS 10 10 14.0 10.50 28 43 57 19.0 15.0 12.9 17.0 M10 x 1.50 20 28.3 10.0 1000 13 76

GIRS 12 GILRS 12 12 16.0 12.00 32 50 66 22.0 17.5 15.4 19.0 M12 x 1.75 22 34.5 13.5 860 13 115

GIRS 14 GILRS 14 14 19.0 13.50 36 57 75 25.0 20.0 16.8 22.0 M14 x 2 25 39.5 17.0 750 16 170

GIRS 16 GILRS 16 16 21.0 15.00 42 64 85 27.0 22.0 19.3 22.0 M16 x 2 28 60.5 21.5 660 15 230

GIRS 18 GILRS 18 18 23.0 16.50 46 71 94 31.0 25.0 21.8 27.0 M18 x 1.5 32 73.0 26.0 600 15 320

GIRS 20 GILRS 20 20 25.0 18.00 50 77 102 34.0 27.5 24.3 32.0 M20 x 1.5 33 83.0 31.5 540 14 415

GIRS 22 GILRS 22 22 28.0 20.00 54 84 111 37.0 30.0 25.8 32.0 M22 x 1.5 37 100.0 38.0 500 15 540

GIRS 25 GILRS 25 25 31.0 22.00 60 94 124 42.0 33.5 29.6 36.0 M24 x 2 42 118.0 47.0 440 15 750

GIRS 30 GILRS 30 30 37.0 25.00 70 110 145 51.0 40.0 34.8 41.0 M30 x 2 51 155.0 64.0 370 17 1130

GIRS 35 GILRS 35 35 43.0 28.00 80 125 165 58.0 46.0 37.7 50.0 M36 x 2 56 191.0 80.0 330 19 1600

GIRS 40 GILRS 40 40 49.0 35.00 90 142 187 69.0 57.0 44.2 60.0 M42 x 2 60 235.0 116.0 290 16 2770

GARS Type

Stainless Steel

Grease Fitting for Re-Lube

Right & Left Hand - External Threads

Suited for Corrosive Environments

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM

 Wt.

B M A F L O G GL g

GARS 3* GALRS 3* 3 6.0 4.50 14 26 33.0 5.1 M3 x 0.5 15 7.0 1.8 — 14 6

GARS 5* GALRS 5* 5 8.0 6.00 18 33 42.0 7.7 M5 x 0.8 20 6.2 3.3 — 13 13

GARS 6 GALRS 6 6 9.0 6.75 20 36 46.0 8.9 M6 x 1.0 22 8.8 4.3 1500 13 20

GARS 8 GALRS 8 8 12.0 9.00 24 42 54.0 10.4 M8 x 1.25 25 16.1 7.0 1200 14 33

GARS 10 GALRS 10 10 14.0 10.50 28 48 62.0 12.9 M10 x 1.5 29 25.5 10.0 1000 13 56

GARS 12 GALRS 12 12 16.0 12.00 32 54 70.0 15.4 M12 x 1.75 33 34.5 13.5 860 13 87

GARS 14 GALRS 14 14 19.0 13.50 36 60 78.0 16.8 M14 x 2 36 39.5 17.0 750 16 129

GARS 16 GALRS 16 16 21.0 15.00 42 66 87.0 19.3 M16 x 2 40 60.5 21.5 660 15 189

GARS 18 GALRS 18 18 23.0 16.50 46 72 95.0 21.8 M18 x 1.5 44 73.0 26.0 600 15 267

GARS 20 GALRS 20 20 25.0 18.00 50 78 103.0 24.3 M20 x 1.5 47 83.0 31.5 540 14 348

GARS 22 GALRS 22 22 28.0 20.00 54 84 111.0 25.8 M22 x 1.5 51 100.0 38.0 500 15 443

GARS 25 GALRS 25 25 31.0 22.00 60 94 124.0 29.6 M24 x 2 58 118.0 47.0 440 15 600

GARS 30 GALRS 30 30 37.0 25.00 70 110 145.0 34.8 M30 x 2 71 155.0 64.0 370 17 1030

GARS 35 GALRS 35 35 43.0 28.00 80 125 165.0 37.7 M36 x 2 73 191.0 80.0 330 19 1600

GARS 40 GALRS 40 40 49.0 35.00 90 142 187.0 44.2 M42 x 2 78 235.0 116.0 290 16 2570

Note: * Without Lube Fitting

Housing: Stainless Steel 1.4057, AISI 431, forged, polished

Sizes 40 made from stainless steel to 1.4057, AISI 431, turned

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel 100Cr6, AISI 52100, hardened, ground, polished, hard chrome plated

This series is also available sealed on request

Models Available

Note: * Without Lube Fitting

Housing: Stainless Steel 1.4057, AISI 431, forged, polished

Sizes 40 made from stainless steel to 1.4057, AISI 431, turned

Insert: Special high strength bronze to CuSn8

Ball: Bearing steel 100Cr6, AISI 52100, hardened, ground, polished, hard chrome plated

This series is also available sealed on request

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 340 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GISW Type

Maintenance Free

PTFE Teflon Liner

Zinc Plated

Right & Left Hand - Internal Threads

Suited for Dynamic Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM *

 Wt.

B M A F L K J O SW G GL g

GISW 5 GILSW 5 5 8 6.00 18 27 36 11 9.0 7.7 9 M5 x 0.8 10 8.0 7.5 600 13 18

GISW 6 GILSW 6 6 9 6.75 20 30 40 13 10.0 8.9 11 M6 x 1.0 12 8.9 9.3 530 13 27

GISW 8 GILSW 8 8 12 9.00 24 36 48 16 12.5 10.4 13 M8 x 1.25 16 14.1 16.7 420 14 46

GISW 10 GILSW 10 10 14 10.50 28 43 57 19 15.0 12.9 17 M10 x 1.5 20 19.3 23.4 350 13 76

GISW 12 GILSW 12 12 16 12.00 32 50 66 22 17.5 15.4 19 M12 x 1.75 22 23.5 32.0 300 13 115

GISW 14 GILSW 14 14 19 13.50 36 57 75 25 20.0 16.8 22 M14 x 2 25 21.0 42.0 260 16 170

GISW 16 GILSW 16 16 21 15.00 42 64 85 27 22.0 19.3 22 M16 x 2 28 32.0 52.5 230 15 230

GISW 18 GILSW 18 18 23 16.50 46 71 94 31 25.0 21.8 27 M18 x 1.5 32 38.5 64.0 210 15 320

GISW 20 GILSW 20 20 25 18.00 50 77 102 34 27.5 24.3 32 M20 x 1.5 33 44.0 78.0 190 14 415

GISW 22 GILSW 22 22 28 20.00 54 84 111 37 30.0 25.8 32 M22 x 1.5 37 53.0 97.0 170 15 540

GISW 25 GILSW 25 25 31 22.00 60 94 124 42 33.5 29.6 36 M24 x 2 42 62.0 122.0 150 15 750

GISW 30 GILSW 30 30 37 25.00 70 110 145 51 40.0 34.8 41 M30 x 2 51 82.0 168.0 130 17 1130

GISW 35 GILSW 35 35 43 28.00 80 125 165 58 46.0 37.7 50 M36 x 2 56 101.0 206.0 110 19 1600

GISW 40 GILSW 40 40 49 35.00 90 142 187 69 57.0 44.2 60 M42 x 2 60 124.0 286.0 100 16 2770

Housing: Sizes 5-12 turned from free-cutting steel to 9SMnPb28K, 12L13

Sizes 14-40 are forged from heat-treated steel to C22, M1023

Size 50 turned from C45, AISI 1045, heat-treated steel

Insert: Free-cutting steel to 9SMnPb28K, 12L13, with PTFE teflon liner bonded to the inner surface

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

Sizes 8-20 available as a sealed version on request

GASW Type

Maintenance Free

PTFE Teflon Liner

Zinc Plated

Right & Left Hand - External Threads

Suited for Dynamic Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM *

 Wt.

B M A F L O G GL g

GASW 5 GALSW 5 5 8 6.00 18 33 42 7.7 M5 x 0.8 20 4.3 7.5 600 13 13

GASW 6 GALSW 6 6 9 6.75 20 36 46 8.9 M6 x 1.0 22 6.0 9.3 530 13 20

GASW 8 GALSW 8 8 12 9.00 24 42 54 10.4 M8 x 1.25 25 11.0 16.7 420 14 33

GASW 10 GALSW 10 10 14 10.50 28 48 62 12.9 M10 x 1.50 29 17.4 23.4 350 13 56

GASW 12 GALSW 12 12 16 12.00 32 54 70 15.4 M12 x 1.75 33 23.5 32.0 300 13 87

GASW 14 GALSW 14 14 19 13.50 36 60 78 16.8 M14 x 2 36 21.0 42.0 260 16 129

GASW 16 GALSW 16 16 21 15.00 42 66 87 19.3 M16 x 2 40 32.0 52.5 230 15 189

GASW 18 GALSW 18 18 23 16.50 46 72 95 21.8 M18 x 1.5 44 38.5 64.0 210 15 267

GASW 20 GALSW 20 20 25 18.00 50 78 103 24.3 M20 x 1.5 47 44.0 78.0 190 14 348

GASW 22 GALSW 22 22 28 20.00 54 84 111 25.8 M22 x 1.5 51 53.0 97.0 170 15 443

GASW 25 GALSW 25 25 31 22.00 60 94 124 29.6 M24 x 2 58 62.0 122.0 150 15 600

GASW 30 GALSW 30 30 37 25.00 70 110 145 34.8 M30 x 2 71 82.0 168.0 130 17 1030

GASW 35 GALSW 35 35 43 28.00 80 125 165 37.7 M36 x 2 73 101.0 206.0 110 19 1600

GASW 40 GALSW 40 40 49 35.00 90 142 187 44.2 M42 x 2 78 124.0 286.0 100 16 2570

Housing: Sizes 5-12 turned from free-cutting steel to 9SMnPb28K, 12L13

Sizes 14-40 are forged from heat-treated steel to C22, M1023

Size 50 turned from C45, AISI 1045, heat-treated steel

Insert: Free-cutting steel to 9SMnPb28K, 12L13, with PTFE Teflon liner bonded to the inner surface

Ball: Bearing steel 100Cr6 (AISI 52100), hardened, ground, polished

Sizes 8-20 available as a sealed version on request

Note: * Only recommended for short term revolutions. Size 50 available on request.

Note: * Only recommended for short term revolutions. Size 50 available on request.

Models Available

Models Available

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 341 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.

Metric Rod Ends

GIXSW Type

Heat Treated Steel

Maintenance Free

PTFE Teflon Liner

Right & Left Hand - Internal Threads

Suited for High Pressure and Tension Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM *

 Wt.

B M A F L K J O SW G GL g

GIXSW 6 GILXSW 6 6 9 6.75 20 30 40 13 10.0 8.9 11 M6 x 1.0 12 16.7 9.3 530 13 27

GIXSW 8 GILXSW 8 8 12 9.00 24 36 48 16 12.5 10.4 13 M8 x 1.25 16 25.5 16.7 420 14 46

GIXSW 10 GILXSW 10 10 14 10.50 28 43 57 19 15.0 12.9 17 M10 x 1.5 20 34.8 23.4 350 13 76

GIXSW 12 GILXSW 12 12 16 12.00 32 50 66 22 17.5 15.4 19 M12 x 1.75 22 42.0 32.0 300 13 115

GIXSW 14 GILXSW 14 14 19 13.50 36 57 75 25 20.0 16.8 22 M14 x 2 25 57.0 42.0 260 16 170

GIXSW 16 GILXSW 16 16 21 15.00 42 64 85 27 22.0 19.3 22 M16 x 2 28 67.5 52.5 230 15 230

GIXSW 18 GILXSW 18 18 23 16.50 46 71 94 31 25.0 21.8 27 M18 x 1.5 32 81.5 64.0 210 15 320

GIXSW 20 GILXSW 20 20 25 18.00 50 77 102 34 27.5 24.3 32 M20 x 1.5 33 93.5 78.0 190 14 415

GIXSW 22 GILXSW 22 22 28 20.00 54 84 111 37 30.0 25.8 32 M22 x 1.5 37 114.0 97.0 170 15 540

GIXSW 25 GILXSW 25 25 31 22.00 60 94 124 42 33.5 29.6 36 M24 x 2 42 135.0 122.0 150 15 750

GIXSW 30 GILXSW 30 30 37 25.00 70 110 145 51 40.0 34.8 41 M30 x 2 51 184.0 168.0 130 17 1130

GAXSW Type

Heat Treated Steel

Maintenance Free

PTFE Teflon Liner

Right & Left Hand - External Threads

Suited for High Pressure and Tension Loads

Right

Hand

Part No.

Left

Hand

Part No.

Size

D

Dimensions (mm) Static

Load

C° kN

Dynamic

Load

C kN

Max

Speed

RPM *

 Wt.

B M A F L O G GL g

GAXSW 6 GALXSW 6 6 9 6.75 20 36 46 8.9 M6 x 1.0 22 9.8 9.3 530 13 20

GAXSW 8 GALXSW 8 8 12 9.00 24 42 54 10.4 M8 x 1.25 25 19.5 16.7 420 14 33

GAXSW 10 GALXSW 10 10 14 10.50 28 48 62 12.9 M10 x 1.5 29 31.4 23.4 350 13 56

GAXSW 12 GALXSW 12 12 16 12.00 32 54 70 15.4 M12 x 1.75 33 42.0 32.0 300 13 87

GAXSW 14 GALXSW 14 14 19 13.50 36 60 78 16.8 M14 x 2 36 57.0 42.0 260 16 129

GAXSW 16 GALXSW 16 16 21 15.00 42 66 87 19.3 M16 x 2 40 67.5 52.5 230 15 189

GAXSW 18 GALXSW 18 18 23 16.50 46 72 95 21.8 M18 x 1.5 44 81.5 64.0 210 15 267

GAXSW 20 GALXSW 20 20 25 18.00 50 78 103 24.3 M20 x 1.5 47 93.5 78.0 190 14 348

GAXSW 22 GALXSW 22 22 28 20.00 54 84 111 25.8 M22 x 1.5 51 114.0 97.0 170 15 443

GAXSW 25 GALXSW 25 25 31 22.00 60 94 124 29.6 M24 x 2 57 135.0 122.0 150 15 600

GAXSW 30 GALXSW 30 30 37 25.00 70 110 145 34.8 M30 x 2 71 184.0 168.0 130 17 1030

Note: * Without Lube Fitting

Housing: Heat -treated 42CrMo4, AISI 4140, forged

Insert: Free-cutting steel 9SMnPb28K,12L13, with PTFE teflon liner bonded to the

inner surface

Ball: Bearing steel 100Cr6, AISI 52100, hardened, ground, polished

Sealed version available on request

Models Available

Note: * Without Lube Fitting

Models Available

Housing: Heat -treated 42CrMo4, AISI 4140, forged

Insert: Free-cutting steel 9SMnPb28K,12L13, with PTFE teflon liner bonded to the inner

surface

Ball: Bearing steel 100Cr6, AISI 52100, hardened, ground, polished

Sealed version available on request

24/7 Sales: 704-588-1091 │ Toll-Free: 800-763-4434 342 www.ptintl.com

Introduction Mounted Ball Bearings SRE / SR2 Spherical Bearings SAF / Plummer Blocks Roller Chain & Sprockets Bushings & Hubs Gears & Racks Belt Drives / Couplings Linear Motion / WINKEL Brg. Accessories, Radial Ball, & Eich Bearings Rod Ends & Spherical Plain Bearings

Web: https://www.rstbearing.com.cn

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249 Mobile: 13940483518 15640413155（微信）

沈阳瑞思达轴承有限公司 SHENYANG TOTAL BEARING CO.,LTD.