1101型电子式电动套筒调节阀

73

Product

BAIC GROUP

1101 Type Electronic-Type Electric Sleeve Regulator

1101 type electronic-type electric sleeve regulator is composed of 3610L/ 3810L/PSL series electronic-type

electric actuator (or intelligent integrated actuator) and sleeve regulator. The electric actuator is equipped with a

servo system, so it does not need to be equipped with a servo amplifier, and it can be controlled with power

supply and an input signal. The regulating mechanism adopts balanced valve plug structure, which has the

features of good stability of valve plug, not easy to produce vibration, low noise, small sensitivity to temperature,

and large allowable use of differential pressure, etc.; it is suitable for the occasions with large flow rate and less

stringent leakage amount requirements. The sleeve regulating cut-off valve with soft seal structure is especially

adapted to the requirements of both regulation and cut-off occasions.

1101(II) type is a low-noise sleeve valve series, except the actuator is different, other use or selection method

see 1104 chapter.

Technical parameters and performance indicators

Nominal diameter DN (mm) 20 25 32 40 50 65 80 100 125 150 200

Rated flow

coefficient KV

Linear 6.9 11 17.6 27.5 44 69 110 176 275 440 690

Equal percent 6.3 10 16 25 40 63 100 160 250 400 630

Rated stroke L(mm) 16 25 40 60

Matching electronic actuator 361LSA-08381LSA

-08PSL201

361LSA-20381LSA20PSL202

361LSB-30/50381LSB-30/50

PSL204

361LSC-65381LSC65PSL312

Nominal diameter DN (mm) 250 300 350

DN300 or DN350 are

recommanded to use doubleseat or angle stroke valve.

Rated flow

coefficient KV

Linear 1000 1650 2160

Equal percent 900 1500 2000

Rated stroke L(mm) 100

Matching electronic actuator 361LSC-99/381LSC-99/PSL314

Control signal 4-20mA (1-5V must be specified)

Power supply 220V 50HZ (380V must be specified)

Intrinsic flow characteristics Linear, equal percentage

Intrinsic adjustable ratio R 50:1

Allowable leakage amount Hard valve core balanced type: Class III, Class IV Soft valve core: Class VI

Nominal pressure

PN

MPa 1.6,2.5,4.0,6.4(6.3),10.0,16.0

Bar 16,25,40,64(63),100,160

Lb ANSI:Class150, Class300, Class600, Class900

Operating

temperature t( ℃)

Normal

temperature type -20～200, -40～250, -60～250

Heat dissipation

type -40～450, -60～450

High temperature

type 450～560 (using high temperature material)

Low temperature

type -60～-100, -100～-200, -200～-250

Regulating cut-off

type

-40～150 (valve core clamp PTFE) -60～200 (valve core clamp reinforced PTFE)

(Soft seals cannot be used when the differential pressure is high)

*Matching actuators can also be used with actuators from other domestic and foreign manufacturers.

74

Product

BAIC GROUP

1. Valve Body

2. Sleeve

3. Valve core

4. Valve stem

5. Bonnet

6. Electronic actuators

Outline dimensions

1101 Type electric sleeve regulator outline dimensions table (unit: mm)

Nominal

diameter

L H

D

Weight Kg

PN MPa

Normal

temperature

Heat

dissipation

high

temperature

PN 1.6

PN6.4MPa

1.6 4.0 6.4 Normal

temperature

High

temperature

G3/4 150 206 560 630

225

10 12 14

20 150 206 565 635 20 25 28

25 160 210 570 640 24 28 31

32 180 220 595 665 26 29 32

40 200 251 655 725

225

36 45 49

50 230 286 660 735 39 49 53

65 290 311 760 840 57 76 84

80 310 337 770 840 72 95 105

100 350 394 770 850

310

85 100 120

125 400 460 1045 1135 150 175 190

150 480 508 1100 1190 187 231 251

200 600 610 1285 1380 242 365 355

250 730 752 1335 1435

355

345 398 495

300 850 819 1580 1785 463 505 585

350 900 972 1890 2198 495 625 698

1. The top of the valve is equipped with a portable manual operating lever, please reserve 150-200mm space

2. Outline dimensions take the matching 361L type actuator as an example

Connection dimensions and standards

75

See 1101 type

Product

BAIC GROUP

Main parts materials

Valve body and upper bonnet type

See 1101 type

See 1101 type

1101 Type electric low temperature sleeve regulator outline dimensions table (unit: mm)

Nominal

diameter D

-100

Dn

℃ -200℃ -250℃

D3 D4 Weight n-d Kg H2 H H2 H H2 H

G3/4

225

290

500

932

700

1132

900

1332

260 290

8-14

21

20 290 1050 1250 1450 35

25 290 1080 1280 1480 39

32 315 1100 1300 1500 285 315 41

40

255

335 1225 1425 1625 305 335

8-16

59

50 370 1263 1463 1663 340 370 65

65 400

600

1426

800

1626

1000

1826 370 400

10-16

95

80 435 1431 1631 1831 405 435 108

100 490 1450 1650 1850 460 490 12-18 138

125

310

555

700

1755

900

1955

1100

2155 525 555 14-18 223

150 630 1785 1985 2185 590 630 16-18 282

200 740 1821 2021 2221 700 740 18-18 395

1. H2

can also be specified by the design institute or the user, for example

with 316L type actuator.

2. The top of the valve is equipped with a portable manual operating lever,

please reserve 150-200mm space.

Ordering information

When ordering, users are requested to provide the following materials

· Regulator name, model and purpose.

· Nominal diameter (mm), nominal pressure (MPa), operating temperature and range.

· Upstream pressure, downstream pressure.

· Media name and status, media flow rate.

· Valve body flange standards.

· Valve body structure length (flange surface distance L).

· Other special requirements (e.g., corrosion resistance requirements, explosion-proof

level requirements, leakage level limitation requirements, etc.).

Technical parameters are subject to change without notice!