曼德产品样册

PRODUCTBROCHURE

福建曼德机电工程有限公司Fujian Mande Electromechanical Engineering Co., Ltd.

Made

致力于打造质量产品的专业生产厂家

福建曼德机电工程有限公司Fujian Mande Electromechanical Engineering Co.,Ltd.

我司成立于2014年，深耕制冷配件领域十余年，集研发、生产及对内、外贸易于一体的专业生产厂家。专注于高品质制冷配件研发与制造，凭借成熟生产工艺、严谨品控体系，为国内外客户提供稳定可靠产品与一站式制冷系统解决方案。多年行业经验积淀，让业务覆盖国內外市场，以专业贏得客户信赖。

Founded in 2014,our company has been deeply engaged in the refrigeration accessoriesindustry for more than ten years.We are a professional manufacturer integrating research and development,production,and domesticand foreign trade.

We focus on the development and manufacturing of high-quality refrigeration accessories.With mature production techniques and a strict quality control system, we provide stable and reliable products as well as one-stop refrigeration system solutionsforcustomersat homeandabroad.

Years of industry experience have enabled our business to cover both domestic and international markets,and we have won the trust of our customers through our professionalism.

CATALOGUE
01球阀（黄铜）Brass Ball Valve
02膜片式单向阀 Diaphragm Check Valve
03活塞式单向阀 Piston Check Valve
04角阀（检修阀）Angle Valve (Service Valve)
04回油阀 oil Return Valve
05旋转角阀 Rotary Angle Valve
06焊接角阀welded Angle Valve
避震软管（减震管）Shock Absorber Hose／Vibration Absorber Hose
08 干燥过滤芯 DrierFiter Core
09 吸气过滤芯 SsuctionFilter Core
09 比泽尔滤芯 BitzerFilter Element
09 二次油滤芯 secondary Oil Filter Element
10 液管干燥过滤器 Liquid Line Drier Filter
10MD-DSKA 系列颗粒芯液体管路用干燥过滤器 MD-DSKA Series Granular Core Liquid Line Drier iter
12 MD-DSCB系列液体管路固体干燥过滤器 MD-DSCB Series Liquid Pipeline Solid Drying Fiter
13 MD-DSKF系列液体管路双向固体芯干燥过滤器 D-DSKF SeriesLiquid Pipeline BidirectionalSolidCore Dryig Filter
14 过滤桶 Fiter Shell
15 吸气过滤桶 suctionFiter Shell
16 56型系列油分离器 Type 56 Series Oil Separator
17 常规式与可拆式（法兰式）油分离器 Conventional & Demountable (Flange Type）Oil Separator
18 螺旋式油分离器 Spiral Type Oil Separator
19MD-R型热交换气液分离器 MD-R Seris Heat Exchange Accumulator
20 MD-Q型气液分离器 MD-Q Series Accumulator
21 储液罐 Receiver Tank

球伐 (黄铜)Brass BallValve

曼德球阀属于手动调节截止阀，适用于双向流动，用于冷冻、冷藏和空气调节装置的液体、吸气和排气管路。

Mandevball valvesaremanual shut-off valvessuitable for bidirectional flow,and are used in the liquid,suction and discharge lines of refrigeration, cold storage and air conditioning systems.

特点 Feature

·全开到全闭仅需转动1/4圈 ·阀体和阀座为焊接工艺 ·双向流道 ·波形式弹簧内置,减少流体内漏 ·采用复合PTFE密封带 ·外部检测口可带或不带

·Only1/4 turn fromfullyopen to fullyclosed ·Valve body and seat are manufactured bywelding process ·Bidirectionalflow passage ·Built-in wave spring to reduce internalfluid leakage ·Equipped with composite PTFE sealing tape ·With orwithout external access port

技术参数 Technical parameters

·阀体最大使用表压力：4.8Mpa
·使用介质温度： * 5 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介质：R22，R507，R404a等各种氟利昂制冷剂

·Maximumworking gauge pressure ofvalve body: 4 . 8 \mathsf { M p a } ·Operatingmediumtemperature: - 5 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C ·Applicablemedia:VariousFreonrefrigerantssuchasR22,R507,R4o4a,etc.

膜片式单向阀 DiaphragmCheckValve

此单向阀采用磁性膜片式设计，应用于氟利昂制冷系统，内部采用导向装置、自吸机构设计，从而使单向阀不受安装角度限制和反向压力大小影响，使阀门自动闭合。

This check valveadoptsamagneticdiaphragmdesignandisusedin Freonrefrigerationsystems.Itisinternally equippedwithaguidingdeviceandaself-priming mechanism,sothatthecheckvalveisnotafectedbyinstalation angle orback pressure,allowing the valve to close automatically.

特点 Feature

·复合膜片设计
·整体紫铜管，消除外漏隐
·阀体中装有过滤网，兼备止回阀和过滤器的功能
·制作工艺：无焊接，没有烧伤膜片，磁条退磁的隐患·逆向泄露小
·极小流通阻力，大流量,基本可忽略管损压力

·安装位置不受限制

·Composite diaphragm design L
·Integral brass tube to eliminate external leakage risks
·Equipped witha filterscreen inside the valve body,functioning as both a check valve and a filter
·Manufacturing process: no welding,no risks of diaphragm damage or magnetic stripdemagnetization
·Low reverse leakage
·Extremely low flow resistance,large flow capacity,negligible pipeline pressure loss
·Unrestricted installation position

技术参数 Technical parameters

·适用HCFC、HFC制冷剂·适用介质温度： - 4 0 ^ { \circ } C ~ + 1 3 0 ^ { \circ } C ·最高工作表压力：4.6MPa·最小开启压力：0.02MPa

·Suitable for HCFCand HFC refrigerants ·Applicable medium temperature: - 4 0 ^ { \circ } C ~ + 1 3 0 ^ { \circ } C ·Maximum working pressure:4.6 Mpa * Minimum cracking pressure:0.02 MPa

活塞式单向阀

PistonCheck Valve

此单向阀主要用于氟利昂系统中：冷冻、冷藏系统和空气调节装置的供液管路、吸气管路及热气管路等制冷系统管路。

This check valve is mainly used in Freon systems:refrigeration,cold storage systems,and refrigeration system pipelines such as liquid supply lines,suction lines,and hot gas lines of air conditioning units.

特点 Feature

·保持流体通道唯一流向，防止逆流

·形式：直通式和角式

·接口：螺口和焊口

·阀体内置减震弹簧

·Maintainsunidirectional flow of the fluid passage and prevents backflow

·Types:straight-through type and angle type

·Built-in damping spring in the valve body

·Connections:threaded and welded

技术参数

Technical parameters

·适用大多数HCFC和HFC制冷剂：如R22、R407C、R134a、R404A、R507、R410A等

·适用介质温度： - 5 0 ^ { \circ } \mathsf { C } ~ + 1 4 0 ^ { \circ } \mathsf { C }

·最高工作表压力： 4 . 6 \mathsf { M P a }

·Suitable for most HCFCand HFCrefrigerants,such as R22,R407C,R134a,R404A,R507,R410A,etc. ·Applicable medium temperature: - 5 0 ^ { \circ } C ~ + 1 4 0 ^ { \circ } C
·Maximum working pressure:4.6 MPa

角阀 (检修阀） AngleValve (ServiceValve)

·最大使用表气压力： 4 . 5 \mathsf { M p a } ，液压：6.8 Mpa;
·使用介质：R22、R502、R407c、R410、R134a、R404a等各种 制冷剂及各种冷冻油；
·使用流体介质温度： - 4 0 ^ { \circ } ~ 1 4 0 ：
·参照标准：GB/T7245-1994.
·Maximum working gauge pressure:4.5 MPa(gas),6.8 MPa (hydraulic)
·Applicable media:Various refrigerants such as R22,R502, R407c, R410,R134a, R404a,as well as various refrigeration oils
·Operating temperature offluid media: - 4 0 ^ { \circ } C ~ 1 4 0 ^ { \circ } C
·Reference standard:GB/T7245-1994

技术参数

回油阀 Oil Return Valve

技术参数 Technical parameters

旋转角阀 Rotary Angle Valve

特点 Feature

·最大使用表压力：4.8 Mpa
·使用介质温度： - 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介质：R22,R134a,R404a等各种制冷剂

·Maximum working gauge pressure:4.8 Mpa ·Operating medium temperature: \angle 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C ·Applicable media:Various refrigerants such as R22,R134a,R404a,etc.

加液接头可以按客户要求采用任何一种方式设置在左，中，右。The liquid filling portcan beinstalledon theleft,center,orright side as percustomerrequirements.

焊接角阀 WeldedAngleValve

特点 Feature

·最大使用表压力：4.8Mpa
·使用介质温度： - 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介质：R22,R134a,R404a等各种制冷剂

·Maximum working gauge pressure:4.8 Mpa ·Operating medium temperature: \angle 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C ·Applicable media:Various refrigerants such as R22,R134a, R404a,etc.

技术参数 Technical parameters

加液接头可以按客户要求采用任何一种方式设置在左，中，右。The liquid filling portcan beinstalledon theleft,center,orright side as percustomerrequirements.

避震软管(减震管)VibrationAbsorberHose/(ShockAbsorberTube)

曼德避震管是由深度褶皱的不锈钢制作而成，用以增加管子的灵活度和吸收震动的效果。选择有极好弹性和吸震能力的波纹管，在外表面紧密覆盖高强度的保护网套，以提供产品极高的耐压力，经过金属环加固后，与铜接管可靠连接成一体。故该产品具备较好的吸震、承压能力。

Mandevibatioasflidotfit elstioil Ate pressure-bearing capacity.

技术参数 Technical parameters

·介质温度： \mathbf { - 4 0 ^ { \circ } C } ~ \mathbf { + 1 5 0 ^ { \circ } C } ·最大工作表压力：见表格·氮气试压： { \bf 6 . 0 M \ p a } ，保压时间：30s，塑封独立盒装·适用CFC、HCFC、HFC及对应的油，可选配适用CO2和R410A的避震管

·Medium temperature: - 4 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C
·Maximum working pressure:See the table
· Nitrogen pressure test: 6 . 0 \mathsf { M P a } ,holding time:30s,individually plastic-packed box
·SuitableforCFC,HCFC,HFCrefrigerantsandcorrespondingoils;versionsforCOzand R410Aareavailableasoptions

曼德接受不同长度和尺寸的定制

干燥过滤芯 DryingFilterCore

包装：金属罐或防水袋，密封性好，能防止异物进入，滤芯：吸气滤芯和干燥滤芯。

Packaging:Metal cans or waterproof bags with good sealing performance to prevent foreign matter from entering. Filtercores:Suction filter cores and drier filter cores.

·Sealing: Nitrogen-filled sealing for metal cans,vacuum sealing for waterproof bags ·Allows refrigerantsand refrigeration oils to pass through without damage ·Hollow design for efficient filtration in any installation direction ·Performance:Absorbs moisture,acid,impurities and oil contaminants

·密封：金属罐冲氮气密封，防水袋抽真空密封·制冷剂及冷冻油均可无损通过·中空式设计，任何方向都能高效过滤·性能：吸水，吸酸，吸杂质，吸油污

特点 Feature

吸气过滤芯 SuctionFilterCore

比泽尔滤芯 BitzerFilterElement

二次油滤芯 Secondary OilFilterElementDrierFilterCore

尺寸：外径\*高度 9 3 x 1 4 0 {mm }
材质：不锈钢滤网
作用：48型油滤芯
Dimensions:Outer Diameter\*Height 9 3 ^ { \star } 1 4 0 \mathsf {mm }
Material:StainlessSteelFilterMesh
Application:Type 48 Oil Filter Element

液管干燥过滤器 LiquidLineDrier-Filter

技术参数 Technical parameters

·对于CFC系统，建议使用加活性氧化铝干燥过滤器。在这些系统中，有可能需要使用具有吸酸性能的干燥过滤器。·对于系统中的油含有添加剂时，不建议使用含有活性氧化铝的干燥过滤器。

·For CFC systems,the use of drier filters with activated alumina is recommended.In such systems, drier filters with acid absorption properties may be required.
·When the oilin the system contains additives,the use of drier filters containing activated alumina is not recommended.

MD-DSKA系列颗粒芯液体管路用干燥过滤器

MD-DSKASeriesGranularCoreLiquidLineDrier-Filter

DSKA系列干燥过滤器采用了高品质的3A球形分子筛，并且在筒体内经过自动压缩与高密度滤网结合，达到干燥过滤的作用，能有效过滤系统中残留的水分和杂质。

The DSKA Series filter driersadopt high-quality 3A spherical molecular sieve,which is automatically compressed inside the cylinder and combined withahigh-density filterscreen toachievedrying and filtration,effectively removing residual moisture and impuritiesin the system.

H

MD-DSCB系列液体管路固体干燥过滤器

MD-DSCBSeries LiquidPipeline SolidDryingFilter

DSC系列干燥过滤器，采用了高品质的3A分子筛颗粒烧结成的模块，与高密度滤网布结合，两端各安装了一个不可逆流的阀，可在逆向时拦截杂质，达到干燥过滤的作用，能有效过滤系统中残留的水分和杂质。

DSC series filterdryer,the use of high quality 3A molecular sieve particlessintered module,combined with high density filter cloth,both endsof the instal-lation of a non-reverse flow valve,can intercept impurities in the reverse,toachieve the role of dry filtration,can effectively filter the residual water andimpurities in the system.

技术参数 Technical parameters

MD-DSKF系列液体管路双向固体芯干燥过滤器

MD-DSKFSeriesLiquidPipelineBidirectionalSolidCoreDryingFilter

该过滤芯由 8 0 % 3 \mathsf { A } 分子筛和 120 % 活性氧化铝制成，对运行在高冷凝温度和需要大的干燥能力的系统是完美的芯体混合物，可以最佳地用于燃油和烷基苯油一起使用的CFC和HCFC制冷剂(R22R502等)可以与HFC及制冷剂兼容。

The core ismade of 8 0 % 3 A molecularsieveand 20 % activated alumina.Itis theperfect core mixture for systems operating at high condensation temperatures andrequiring large drying capacity.It can be optimally used for fuel and alkylben-zene oils used together with CFC and HCFC refrigerants (R22R502,etc.) and compat-iblewith HFC and refrigerants.

技术参数 Technical parameters

过滤桶 Filter Shell

安装位置：（氟利昂或氨）制冷系统液、汽、油管路，可除去水分、酸与残留的污染物，从而使压缩机得到更好的保护，延长其使用寿命。

Installation location: Liquid,vapor and oil pipelines of (Freon or ammonia) refrigeration systems.lt can remove moisture,acids and residual contaminants, thus providing better protection for the compressor and extending its service life.

特点 Feature

·滤筒表面经过耐腐蚀喷塑处理，采用耐腐蚀环氧树脂静电喷塑，可在任何酸碱环境下使用
·盖板为钢或铝(按客户的要求)
·无缝管筒体，坚固的铜接口或碳钢接口(按客户的要求)
·盖板装有测量压力降和充注用的1/4NPT检修口（客户可自行安装角阀）
·防锈法兰板、专利设计滤芯支架和镀锌弹簧便于滤芯更换
·最大工作表压力为3.8Mpa,最大工作温度为 + 1 3 5 ^ { \circ } C
·滤筒有效过滤系统内杂质、吸收水分和酸性物质，安装D-48/H-48或D-100/H-100固体 干燥滤芯
·Thesurfaceofthefiltercartridgeistreatedwithcorrosion-resistantplasticspraying,usingcorrosion-resistantepoxyesin electrostatic spraying,enabling use in any acid or alkaline environment.
·Cover plate made of steel or aluminum (as per customer requirements).
·Seamless tube body with sturdy copper or carbon steel connections (as per customer requirements).
·Thecoverplateisequippedwitha1/4NPTserviceportforpressredrop measurementandcharging (customerscaninstal angle valves on their own).
·Rust-proofflange plate,patentedfiltercore bracketand galvanized spring facilitateeasyfiltercorereplacement.
·Maximum working pressure: 3 . 8 \mathsf { M P a } _ { \iota } maximum working temperature: + 1 3 5 ^ { \circ } C .
·Thefiltercartridgeeffctivelyfiltersimpurities,absorbsmoistureandacidicsubstancesinthesstem,andisfitedwithD-48/ H-48 or D-100/H-100 solid desiccant filter cores.

技术参数 Technical parameters

吸气过滤桶 SuctionFilterDrum

吸气过滤桶安装在系统的液、汽管路中，可除去水分、酸与残留的污染物，从而使压缩机得到更好的保护，延长其使用寿命。

Suction filter driers are installed in the liquid and suction lines of the system to remove moisture,acids and residual contaminants,providing better protectionfor the compressor and extending its service life.

特点 Feature

·筒体表面经过耐腐蚀喷塑处理，耐腐蚀环氧树脂静电喷塑，可在任何环境下使用
·盖板为钢或铝(按客户的要求)
·耐久的坚固钢壳，坚固的铜接口或碳钢接口(按客户的要求)
·装有测量压力降和充注用的1/4NPT检修口
·防锈法兰板、专利设计的滤芯支架和镀锌弹簧便于滤芯更换
·作压力为34.5Bar,最大工作温度为 + 1 3 5 ^ { \circ } C

·安装在吸气管路上

·作为吸气管过滤筒时，为有效过滤系统内杂质，避免脏物进入压缩机，安装x-48/×-100纤维百褶滤芯或F-48/F-100 不锈钢滤芯

·Thecylinderfaciseatditoroiostapsticigoosisstatoyiectroaticspable for use in any environment.
·Cover plate is made of steel or aluminum (as per customer requirements).
·Durable solid steel shell with robust copper or carbon steel connections (as per customer requirements).
·Equipped witha 1/4 NPT service port for pressure drop measurement and charging.
·Rust-proofflange plate,patented filter holderand galvanized spring foreasy filter replacement.
·Working pressure:34.5 Bar,maximum operating temperature: + 1 3 5 ^ { \circ } C
·Installed in the suction line.
·WhenusedasasuctionlinefilterdrierinstallX-48/X-100pleatedfiberfilterelementsorF-48/F-100stainlessteelfilter elements to effectivelyfilterimpurities in thesystemand prevent contaminants from entering thecompressor.

技术参数 Technical parameters

56型系列油分离器 Type56Series OilSeparator

工作原理 Working Principle

工作原理：制冷剂和冷冻油进入油分离器，带有悬浮油颗粒的气态制冷剂与螺旋型钢刷相接触，并且沿气道旋转流动。油颗粒在离心力的作用下，被分离到筒形气道的筒壁上，同时螺旋型钢刷对油颗粒还具有吸咐分离作用，被分离出来的油颗粒聚集成较大油滴流入油分离器底部油收集区。并通过此处安装的浮球式针阀将油返回到压缩机曲轴箱或储油器中

·设计压力： 2 . 9 \mathsf { M P a } ：·适用制冷剂：R134a、R22、R407C、R404A、R507A。

Working Principle

Refrigerant and refrigeration oil enter the oil separator. Gaseous refrigerant containing suspended oil particles comes into contact with the spiral steel brush and flows rotationally along the air passage.Under the action of centrifugal force,oil particles are separated onto the wall of the cylindrical air passage.Meanwhile,the spiral steel brush also adsorbs and separates oil particles.The separated oil particles gather into largeroil dropletsand flow into the oilcollection area at the bottom of the oil separator.The oil is returned to the compressor crankcase oroil reservoir through the float-type needle valve installed here.

·Design Pressure:2.9 MPa ·Applicable Refrigerants:R134a,R22,R407C,R404A,R507A

技术参数 Technical parameters

常规式与可拆式(法兰式)油分离器

Conventional&Demountable (Flanged) OilSeparator

技术参数 Technical parameters

·介质温度： - 4 0 ~ + 1 2 0 ^ { \circ } C
·最大工作压力：31Bar
·爆破压力：190Bar
·储油量：55833-559011/5301-5305600毫升， 569011-569417/6303-63051000毫升
·喷塑厚度：50-80um
·Medium Temperature: * 4 0 ~ + 1 2 0 ^ { \circ } C
·Max.working pressure:31Bar
·Burst pressure:190 Bar
·Oil storagevolume:55833-559011/5301-5305 600ml,569011-569417/6303-63051000ml
·The thickness of paint film :50->80um

螺旋式油分离器 SpiralOilSeparator

工作原理 Working Principle

制冷剂和冷冻油进入油分离器，带有悬浮油颗粒的气态制冷剂与螺旋型钢刷相接触，并且沿气道旋转流动。油颗粒在离心力的作用下，被分离到筒形气道的筒壁上，同时螺旋型钢刷对油颗粒还具有吸咐分离作用，被分离出来的油颗粒聚集成较大油滴流入油分离器底部油收集区。并通过此处安装的浮球式针阀将油返回到压缩机曲轴箱或储油器中

RefrigerantandrefrigerationoilentertheoilseparatorGaseousrefrigerantcontainingsuspendedoilparticlescomesintocontact withthespiralstelbrushndflowsinarotatingmanneralong theairpassageUndertheeffectofcentrifugalforce,oilparticlesare separatedontotheinnerwallofthecylindricalairpassage.Meanwhile,thespiralstelbrushalsoadsorbsandseparatesoilparticles. TheseparatedoilparticlesgatherintolargerdropletsandflowintotheoilcolectionareaatthebottomoftheoilseparatorTheoilis thenreturned to thecompressorcrankcaseoroilreservoir through the float-type needle valve installed here.

MD-R型热交换气液分离器

MD-RSeriesHeatExchangeAccumulator

工作原理 Working Principle

制冷系统中，制冷剂管路可分为高压与低压，高压制冷剂温度较高，需要冷凝器冷却，而经过蒸发器低压制冷剂相对温度较低，需要气液分离器来分离气态与液态，液态的制冷剂则需要升高温度而蒸发，成为气态后才进入压缩机，避免液击，以延长压缩机的使用寿命。

Inarefrigeratiostefrigerantlinescandiidedintogpressureadlw-presursids.Hpressreergeratselatiely hightemperatureandeedstobeoledbycondenserLwpressureefrgerantexingtheevaporatrhasalowertemperaturendreuires agas-liquidseparatortoseparateaporandliqudpases.Liqudefrigerantmusteatedandapodntogasbeforeenteringthempeor to prevent liquid slugging,thereby extending the service life of the compressor.

特点 Feature

·耐久的坚固钢壳体
·高耐腐蚀喷塑处理
·最大工作压力：2.9Mpa，爆破试验175Bar
·推荐在蒸发温度低于 + 5 ^ { \circ } C 的制冷系统中安装热交换器适用HFC、 HCFC、CFC制冷剂和它们相应的油
·Durable heavy-duty steel shell
·High corrosion-resistant plastic spraying treatment
·Maximum working pressure: 2 . 9 M P a ,bursttest:175 bar
·It is recommended to installa heat exchanger in refrigeration systems with evaporation temperaturesbelow + 5 ^ { \circ } \mathsf { C } . \mathsf { S } uitable for HFC,HCFC,CFC refrigerantsand their corresponding oils.

MD-Q型气液分离器

MD-QTypeGas-LiquidSeparator 工作原理 Working Principle

制冷系统中，制冷剂进入压缩机前必须将气态和液态分离让气态制冷剂进入压缩机，压缩机才不会受到液击，液态制冷剂留在气分内，气液分离器的U型回气管底部有多个回油孔，油随气态制冷剂一起回到压缩机中。有了气液分离器的保护，压缩机的寿命才会更长久，系统循环才会更正常。

Inarefrigeratioseddrupadtfrtopsoset toflowintohomptiLdrisiu Ushapedeturti theservicelifeof the compressoris prolonged and the system cycle operates more reliably.

特点 Feature

·防止液击，控制液态制冷剂回流；
·最大流量与最小压力降设计；
·用于HCFC与HFC的制冷剂及其油;在进口处印有"in”；
·内部回气管采用"U"设计；
·耐高腐蚀表面喷塑处理；
·最大工作压力：31Bar，爆破压力：190Bar.介质温度- 4 0 - 1 2 0 ^ { \circ } C
·Prevents liquid slugging.controlled liquid return
·Designed maximum flow and minimal pressure drop
·Use with HCFC and HFC refrigerant and with associatedoils
·Stamped "in"at the postion of inlet
·Designed"U"shage for return tube
·High corrosion-resistant paint coating finish
·The max working pressure 31Bar,the burst pressure190Bar,the medium temperature-40-120"C

技术参数 Technical parameters

储液罐 ReceiverTank

工作原理 Working Principle

储存供给蒸发器的液体制冷剂。当系统维修时，储液器也能回收且储存系统中部分制冷剂。

储液器容积大小根据设备中制冷剂充注量来确定，可根据系统的要求进行选择。

Stores liquid refrigerantto supply the evaporator.During system maintenance,the receiver canalso recoverand store partof the refrigerantin the system.

Thevolume of the receiveris determined according to the refrigerantcharge ofthe equipment and can be selected based on system requirements.

特点 Feature

·结构：立式、卧式;

·可选用：视液镜、浮球、阀、安装支架、安全阀接口、易熔塞：带有PTFE阀门密封垫片：
·高度耐腐蚀的表面喷塑处理，可以在所有环境下使用，包括海洋应用；制冷剂：HFC、HCFC、CFC制冷剂及相应的冷冻油： ·最大许可工作压力：3.5Mpa：爆破压力:190Mpa:
·许可工作湿度： { \boldsymbol { - 4 0 } } ~ 1 0 0 ^ { \circ } { \mathsf C } =
·可需据客户的特定需求设计制造特殊的储液器; ·Structure:Vertical and horizontal types;
·Optionalaccessoies:sightgla,flatballalve,mountingracket,fetyveortfusbleugwithFlvekets; ·Highlycorrosion-resistant plastic-sprayedsurface,suitableforuseinallenvironmentsincluding marineapplications; ·Refrigerants:HFC, HCFC,CFC refrigerants and corresponding refrigeration oils;
·Maximum allowable working pressure: 3 . 5 \mathsf { M P a } Burst pressure:190 Mpa;
·Allowable working temperature: - 4 0 ~ 1 0 0 ^ { \circ } C ;
·Special receivers can be designed and manufactured according to customers'
specific requirements.

Technical parameters

储液超热热交换器(三合一)

Receiver-Superheat-HeatExchanger (Three-in-One)

特点 Feature

·耐节省用电：将旧式低压液分离因滴水而浪费的冷度和电力完全回收到 高压储液装液体内而增加冷度，又节省用电。
·增加冷冻效果：因高压储液器和低压气液分离器内的冷媒，进行热交换 而产生过冷却和适当过热，使循环中的冷媒焓值增加，在蒸发时能发挥 到最大冷冻能力。
·确免液压缩，确保没有液体回流到压缩机中引起满压缩。
·不滴水免保温。
·省工省料省空，增加价值感，提升整机美观，没有滴水，发霉发臭，污 染周围环境的现象。
·nergysaving:ecovrstelinapacitdoweratedrippgitraditoall-presureldepaatorsetugtopletely to the high-pressure receiver to enhance cooling effect and reduce power consumption.
·mprovedrefrigeratiopfoance:Heateangeefrgrantineigpresurereceeandlo-pressuregs-lqdsepaaorduces subcoolingandproprsupeatincreasingtheenthalpyfcirculatingrgeratandmaximigefrgerationcapacityuringevapoatin
·Preventsliquidslugging,ensuringnoliquidrefrigerantflowsbackintothecompressortocauseliquidfloodbackdamage.
·No dripping,no insulation required.
·Labor-saving,material-saving and space-saving,enhancing overallvalue and appearance.
·No dripping,mold,odor orenvironmental pollution.

技术参数 'echnical parameters

福建省福州市台江区鳌峰街道鳌江路8号福州金融街万达广场二期A1