铁路交通硬件配置解决方案 - 电子画册在线预览、各类电子画册在线制作-云展网平台

Hardware Configuration Solution

for Rail Transit

Hardware Configuration Solution for Rail Transit

Typical Locks &

Hardware Brochure

Trane Protective Film

Product Catalog

Hardcover House

Hardware Configuration

Atlas

School Hardware

Configuration Brochure

Typical Bathroom

Hardware Atlas

Fire Door Hardware

Integration Brochure

Railway Hardware

Configuration Brochure

Hospital Hardware

Configuration Brochure

Typical Shower Room

Products

Shower Bathroom Hardware

Scene Integrated Product

Gallery

Apartment-Hotel Hardware

Configuration Brochure

Factories-Malls-Offices

Hardware Configuration

Solutions

For more product information, please scan the QR code in the image above

CONTENTS

Tender Technical Requirements Template .....05

Hardware Configuration Sheet Template.......11

Key Management System..............................13

Railway Transportation Total Solution...........15

Door Lock Hardware Series......... ..................37

Door Control Hardware Series.......................71

Bathroom Hardware Series...........................77

Project References........................................03

Anti-theft lock series.............................................................. 47

Escape push bar lock series...................................................50

American standard series...................................................... 39

Fire lock series.......................................................................58

Airtight lock..............................................................................56

Mechanical and electrical integrated lock series...................62

Hardware accessories series .................................................65

Kitchen hardware series.........................................................81

European standard series...................................................... 43

Tube well Lock series..............................................................60

Public accessories series........................................................83

Door closer series....................................................................72

Hardware Configuration Solution for Rail

Transit (American Standard Series)................19

Hardware Configuration Solution for Rail Transit

(European Standard Series)...........................28

Integrated Solutions Provider R & D patent

There are more than 800 patents in

domestic and abroad

It has more than 10000 products and

a constantly updated product library

More than 4000 sales service teams

from more than 500 sales service

institutions in domestic and abroad

Stock storage system

Professional installation team

Perfect logistics distribution system

R & D support

Product support

Service support

Warehousing, logistics,

installation support,

R & D Integration

Product integration

Service integration

Warehousing, logistics, installation integration

Product category

Organization and

team

Integrated system

CERTIFICATE OF COMPLIANCE

Certificate Number 20190510-R39782

Report Reference R39782-20190111

Issue Date 2019-May-10

Bruce Mahrenholz, ctor North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please

contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 2

Issued to: GUANGDONG KIN LONG PRECISION PRODUCTS CO

LTD

NO.88 Guangfu Rd, Tongle Village,Dongsheng Town

Zhongshan City, Guangdong 528414 CHINA

This certificate confirms that

representative samples of

SINGLE-POINT LOCKS AND LATCHES

See Addendum Page for Models/Product

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10C - Positive Pressure of Fire Tests of Door

Assemblies

Additional Information: See the UL Online Certifications Directory at

https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up

Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s

Follow-Up Services.

Look for the UL Certification Mark on the product.

Certificates from authorities

03 Shijiazhuang Metro Nanning Metro

Luoyang Rail Transit

Beijing New Airport Terminal

05 1、 Code and Standards

2、Technical Requirements

2.1、 Requirements for American standard mortise locks

2.1.1 General requirements

2.1.2、American standard storage room lock (used for equipment room doors)

Functional requirements for use

Product standards and code, engineering standards and code, acceptance standards and specifications include (but are

not limited to):

GB12955-2015《Fire resistant doorsets》

GB/T20909-2017《Steel windows and doors》

GB17565-2007《General specification burglary resistant safety door》

GB15763.1-2009《Safety glazing materials in building - Part 1: Fire resistant glass》

GB16809-2008《Fire resistant windows》

17J610-1《Special doors and windows》

GB14102-2005《Fire resistant shutter》

GB50877-2014（2019 version）《Code for installation and acceptance of fire resistant shutters,fire resistant doorsets and fire resistant windows 》

GB/T7106-2019《Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors》

04J631《National Architectural Standard Design Institute for Hardware Accessories for Doors, Windows, Curtain Walls and Windows;》

GA93-2004《Fire-proof door closer》

JG/T268-2019《Door Closers for Construction》

QB/T 2474-2017《Mortise locks》

GA/T73-2015《Burglary-resistant mechanical locks》

GB16807-2009 《Fire intumescent seals》

GB50157-2013 《Code for design of metro》

DB11/995-2013 《Code for design of urban rail transit engineerin》

GB51298-2018 《Standard for fire protection design of metro》

GB50016-2014（2018 Version）《Code for fire protection design of buildings》

GB 50352-2019 《Uniform standard of civil buildings》

The product standards and code involved in the equipment; Engineering standards and code; The acceptance standards, specifications,

etc. shall fully comply with all current regulations and specifications of the People's Republic of China, including but not limited to the

above content. The above code and standards have the terms of this standard by quoted in this requirement. All code and standards

default to the latest version of these files. For any discrepancies with the current version , the latest version shall prevail.

1）The performance meets the first level standard of ANSI/BHM A156.13, and a third-party certification report is required.

2）The service life is over 1 million times, a third-party certification report is required.

3）Precision cast stainless steel with a length of no less than 19mm, three section anti friction latch bolt, and all locking bolt

should not contain any non-metallic materials such as plastic. Adopting precision cast stainless steel split solid handle, with a

surface treatment of forged stainless steel color. Standard installation center distance 70mm,

4）The lock body material should be made of high-strength steel, which has undergone anti-corrosion treatment. The key

moving parts of the door lock should be made of steel stamping, and the load-bearing parts should be precision cast stainless

steel. Brass or other soft metals cannot be used. The lock body should be equipped with a stainless steel locking buckle plate

that meets ANSI standards, with a guide bolt, and no distinction between left and right hands. The locking bolt can be reversed

and adjusted on-site to adapt to the left and right hand door orientation.

5）The lock body should use high-strength springs to ensure the normal rebound of the handle and prevent the handle from

sagging during use. The handle shaft should be made of corrosion-resistant reinforced steel with sufficient length to adapt

to different thicknesses of the door leaf. The indoor and outdoor handles should be designed separately to ensure separate

operation.

6） Doors with fire protection requirements and locks on the doors should pass the 1.5 hour fire protection type inspection

required by the national standard GB12955-2008, and provide a third-party certification report.。

Proposal Technical Requirements Template

2.1.3、 American standard classroom lock (used for cable rooms, air rooms, air ducts, etc.)

Functional requirements for use:

2.1.4、American standard corridor lock (for corridor doors)

Functional requirements for use:

2.1.5、American standard apartment lock (used for employee dormitories)

Functional requirements for use:

2.1.6、 American standard public restroom indicating lock

Functional requirements for use:

2.1.7、American standard dormitory locks

1） Inside the door: Pressing the handle inside the door at any time can simultaneously retract the inclined bolt and safety

bolt, achieving a single action emergency escape function.。

2）Outside the door: The outside handle is always fixed and cannot rotate. The door automatically locks when closed. After

locking, use the key to open the door. When the door is closed, assist the safety bolt to lock the latch bolt. Equipped with a

mechanical lock cylinder on the outside.

1） Inside the door: Pressing the handle inside the door at any time can simultaneously retract the latch bolt and safety bolt,

achieving a single action emergency escape function.

2）Outside the door: The door is locked with a key, but cannot be locked inside. After locking, use the key to unlock the door.

When the door is closed, assist the safety bolt to lock the latch bolt. Equipped with a mechanical lock cylinder on the outside.

Press the handle inside and outside the door at any time to retract the latch bolt to unlock, without a lock cylinder.

1）Inside the door: Pressing the handle inside the door at any time can simultaneously retract the latch bolt and safety ,

achieving a single action emergency escape function.

2）Lock the door with a key outside the door. After locking, unlock the door with the key. When the door is closed, assist the

safety bolt to lock the latch bolt. Equipped with a mechanical lock cylinder on the outside.

3）Lock the door with a knob to active deadbolt.

Inside the door: 1) Press the handle inside the door at any time to retract both the latch bolt and the safety bolt, achieving an

emergency escape function in one action.

2) Use the knob to active the deadbolt lock it

Outside the door: 1) In any case, can use coins to retract deadbolt outside the door at anytime, and the device has a usage status

indicator function

2）When locking with a knob indoors (with the bolt actived), the outer handle cannot be pressed down to unlock

3.)When the dead bolt retracts, the outer handle can be pressed down to unlock.

Inside the door: 1) Press the handle inside the door at any time to retract both the latch bolt and the safety bolt, achieving an

emergency escape function in one action.

2）Use the knob to active deadbolt and lock the outer handle at the same time.

Outside the door: 1) The key can unlock under any circumstances.

2）When locking with a knob indoors (with the bolt actived), the outer handle cannot be pressed down to unlock.

3）When the dead bolt retracts, the outer handle can be pressed down to unlock.

2.1.8、American standard office locks

Inside the door: 1) Press the handle inside the door at any time to retract both the latch bolt and the safety bolt, achieving an emergency

escape function in one action.

2）Use the knob to lock or unlock the outer handle.

Outside the door: 1) The key can unlock under any circumstances.

2） Lock or unlock the external handle with the key.

3）When the outer handle is locked, the outer handle cannot be pressed down to unlock it.

2.2、Requirements for anti-theft locks

Inside the door: 1) Press the handle inside the door at any time to retract both the latch bolt and the deadbolt, achieving an

emergency escape function in one action.

07 2.3 Requirements for European standard mortise locks

2.3.1 General requirements

2.4 Requirements for airtight locks

2.5、American standard door closer

2.6、European standard door closer

2.7、American standard hinge

The lock body has passed EN12206 Level III testing and CE certification, with an opening life of over 200000 times.

Doors with fire protection requirements and locks on the doors should pass the 1.5 hour fire protection type inspection required by the

national standard GB12955-2008, and provide a third-party latch bolt .The functions include corridor lock, bathroom lock, door lock,

indicator bathroom lock, office lock, deadbolt lock, storage room lock, and classroom lock.

1）The product meets the requirements of GB/T7106-2019, and the wind resistant surface can withstand a pressure of 3000Pa. The door

leaf bears an impact load of 294N and has a lifespan of 500000 times.

2）Handwheels are installed on both sides of the door, both inside and outside, and the door leaf can be opened through the handwheel

3）3 point fastening (top, bottom, middle)

1）The door closer should comply with ANSI A156.4-200I A156.4-2000 Class I standard and be certified. It has been opened more than

2 million times and has passed the UL3-hour fire protection certification of the American Business Laboratory. It meets the relevant

requirements of GB12955-2008 and has passed the fire protection type test of the China National Fixed Fire Extinguishing System and

Refractory Component Quality Supervision and Inspection Center.

2）The door closer should be made of high-strength steel, with independent door opening buffer adjustment function, door closing

speed and locking speed adjustment function. The door closer has adjustable force levels 1 to 6, suitable for a maximum door width of

1524mm, and comes with a protective cover.

3）The surface treatment of the door closer meets the corrosion resistance salt spray test standard for more than 100 hours, and the silver

electrostatic spraying surface is applied.

4）The door closer should have no distinction between left and right door orientations, and should be equipped with a parallel arm

mounting plate as standard. The outer door closer should be equipped with a high-strength parallel arm mounting plate with a door stop

function.

5）The door closer should have no distinction between left and right door orientations, and should be equipped with a parallel arm

mounting plate as standard. The outer door closer should be equipped with a high-strength parallel arm mounting plate with a door stop

function.

1）The door closer should pass EN1154 testing and have CE certification, with a lifespan of over 500000 times, meet the relevant

requirements of GB12955-2008, and pass the fire protection type test of the China National Fixed Fire Extinguishing System and

Fireproof Component Quality Supervision and Inspection Center.

2）The door closer should be made of high-strength steel, with independent door opening buffer adjustment function, door

closing speed and locking speed adjustment function.

3） The number of hinges is determined based on the height of the door. Generally, one hinge is used for every 762mm of the door

height, specifically:

Door height ≤ 1524mm：2 pieces

1524mm < door height ≤ 2286mm：3 pieces

2286mm < door height ≤ 3048mm：4 pieces

1）Ordinary hinges should comply with the American standard ANSI/A156.1-2006 Class II standard, and can be opened more

than 1.5 million times. A third-party certification report is required. The hinges used for fire doors must pass the 1.5 hour fire test

required by the national standard GB12955-2008 and have a report

2）The ordinary door adopts a stainless steel hinge with 5 sections and 2 oil lubricated ball bearing structures, with a satin

stainless steel finish. The access door or tube well door adopts a 3 section steel spring hinge,

2） Use the knob to active or retract the safety bolt.

3）The inner handle can be lifted backwards to active the deadbolt.

Outside the door: 1) The key can open the fixed deadbolt and latch bolt, but cannot open the safety bolt.

2）The outer handle can be lifted backwards to active the deadbolt.

3）The outer handle cannot be pressed down and the latch bolt cannot be tilted.

The entire product meets the B-level requirements of the GA73-2015 \"Burglary-resistant mechanical locks\" standard, with the lock cylinder

meeting the C-level requirements and a test report from the Testing Center of the Ministry of Public Security

2.8、European standard hinge

2.9、Door pivot

2.10、American standard escape device

2.11、European standard escape devices

2.12.Floor hinge

2.13、 Interval escape device (four lock point type)

4）Model and size: Ordinary hinge H1:114 × 114 × 3.4 mm

Crossing hinge EH: 114 × 114 × 3.4 mm

5）The manufacturer's trademark should be etched on the front of each hinge to enable identification of the hinge manufacturer even

after the door is installed.

1）Tested according to the European standard EN 1935:2002 and CE certified, with up to 200000 opening times;

2）Must pass the 90 minute fire test required by the national standard GB12955-2008 and provide a test report.

1） To install steel or eccentric heaven and earth door shafts for closed doors or wind resistant doors, the door shaft must have a loadbearing capacity of over 275kg, a lifespan of over 500000 times, and can withstand positive and negative wind pressures of 6000 Pa. There

is a third-party test report.

2）The shootbolt lock system can be provided in various specifications that are suitable for different door types. For doors with a height

exceeding 2.0m, an intermediate shaft must be installed at the center line of the height.

3）Should pass the 1.5 hour fire test required by the national standard GB12955-2008 and have a report.

1）The tunnel passage door adopts a flat push escape device, which meets the first level standard of ANSI A156.3-2001 and has been

certified. It has passed the UL3-hour fire protection certification of the American Underwriters' Laboratory, meets the relevant requirements

of GB12955-2008, and has passed the fire protection type test conducted by the China National Fixed Fire Extinguishing System and

Refractory Component Quality Supervision and Inspection Center for more than 1.5 hours.

2）The escape device push bar made of stainless steel material, and the fixing parts of the escape push bar should be designed reasonably

to ensure that any screw, bolt, or other fixing part falling off or loosening will not cause the escape push bar lock bolt to fail to operate.

3）The exterior handle style and surface treatment of the device should match other locks, and its lock cylinder can be included in a unified

master key management system with other locks.

4） The escape devices of the same series should have optional electronic control functions such as connecting with the access control,

electronic control handles, electronic control locks, status monitoring, local or remote alarms, and electronic control delayed exit.

1）Passed EN1125 testing and CE certification, with a lifespan of over 200000 cycles,

2）Must pass the 90 minute fire detection required by the national standard GB12955-2008 and provide a detection report

All floor hinges comply with EN 1154 standards, are suitable for doors weighing 300KG, have a 90 degree door stop function, have a lifespan

of over 500000 times, are made of 304 stainless steel, and have a surface hairline treatment.

1）Install interval emergency evacuation doors and escape doors at designated locations within the central area of the escape passage.

The installation of heavy-duty flat push escape devices for all interval emergency evacuation doors and escape doors should meet the

requirements of national standard commercial grade high-strength escape devices.

2）The fire door lock of the interval connecting passage must adopt an escape push bar device (upper, middle, and lower four point type),

which includes push bar (or press bar), fixed seats, lock bolts, lock seats, and other components. When pushed horizontally or pressed

down along the escape direction at any position of the effective length of the push bar on the inner side of the door, the lock bolt will retract

to release the locking function, achieving an emergency escape function. The outer side is equipped with a handle and lock cylinder.

3）It must be a product that has passed the verification of the National Fixed Fire Extinguishing System and the Quality

Supervision and Inspection Center for Refractory Components, and has a valid 90 minute fire protection type test

report. It must have been tested more than 500000 times, and corresponding test certificates must be provided for the

above standards;

4）The escape device must be equipped with a door lock cylinder and a fixed handle outside the door, which is made of

stainless steel; The handle style and surface treatment should match other locks. The device should have the feature of

quickly changing the door handle on site without distinguishing between left and right directions;

5）The section connecting passage fireproof door is required to be able to withstand wind pressure of 6000Pa.

2.14、Door hardware accessories

The door hardware provided by the bidder must be provided by the same manufacturer, and all small hardware components, such as

sequencers, door stoppers, bolts, dustproof boot, etc., must not be used interchangeably between two or more brands of small hardware

in the same door.

09 3）Push pull handle, skirting board and mop board, stainless steel pull plate, door stop:

The surface treatment is hairline stainless steel color. It must be fixed with threaded screws, and the surface treatment should be hairline

stainless steel color.

The door stop should be installed on the wall or on the ground according to the actual situation, and should not obstruct the normal passage

of people or affect the opening angle of the door leaf.

3、Installation Technical Requirements

4、Information to Be Provided by The Bidder

5、Product Delivery

1）Except for special specifications or certain control requirements, as well as those determined by the design unit, the installation

of hardware can be carried out in accordance with the specifications described in the National Building Standard Design Atlas 04J631

compiled by the China Building Standards Design and Research Institute;

2）Install each hardware according to the manufacturer's instructions and recommendations. Whether it is internal or surface

mounted hardware, if it needs to be cut or matched, it must be painted or finished on the door surface, removed, stored, reinstalled,

and subjected to surface protection treatment before proceeding. And only after the primer is completed can the hardware be

installed;

3）Set horizontal or vertical lines to ensure the correct installation position. If necessary, adjust and reinforce the base plate for

proper installation and operation.

1）Product information: According to the requirements, the bidder will submit the product technical information of each hardware

manufacturer, including necessary documents to prove compliance with the design requirements, installation instructions, and maintenance

instructions for operating components and finishes;

2）Hardware configuration table: The supplier shall prepare and submit the final hardware configuration table in the following form for

confirmation by the design unit and the tenderer before manufacturing. The content includes information such as the size of the door,

functional area, form of the door, opening direction, and hardware configuration of each door

3）The final hardware configuration table includes: based on the hardware summary table, the file configuration table is divided into

\"hardware groups\" according to the listed hardware, indicating the various hardware required for each door. Including the following

information:

a.The model, style, functional description, quantity, and finish of the hardware;

b.Hardware name and manufacturer;

c. The corresponding positions of hardware on doors and frames;

4）Before submitting the hardware configuration table and placing an order, the bidder must submit a set of exposed hardware samples

that meet the requirements listed in the hardware configuration table in this technical requirement, along with coordinated finishes, for

confirmation by the design unit and the bidder's representative;

5）The bidder shall provide samples for all doors, door frames, and other product manufacturers that require factory prefabrication for

the installation of hardware components.

1）Concealed double door sequencer: used to control the closing sequence of two doors to ensure correct closing and prevent stacking

a. Must pass the 90 minute fire test required by the national standard GB12955-2008 and provide a test report。

b. Built in high-strength spring double bolt structure.

c. All SUS304 stainless steel materials.

d. The warranty period is 2 years and a quality guarantee certificate issued by the manufacturer is required.

e. Location of use: All double leaf fire doors should be installed. If there is a conflict with the installation of the access lock or door closer,

a surface mounted double door sequencer can be used; Surface mounted double door sequencer: used to control the closing sequence

of two doors, it must pass the fire protection testing conducted by the national testing agency (in accordance with the fire protection

requirements of GB12955-2015 appendix), and have a 90 minute fire protection type effective testing report

2）Manual concealed bolt for steel door

a. Must pass the 90 minute fire proof type test certification required by GB12955-2015, and provide a copy of the certificate. Including

access doors and normally open fire doors for use.

b.Double door driven door leaf is used, and manual (automatic) latch should be provided with steel door according to the material of the

door body.

c.Double door height above 2300mm, with extended concealed latch (16 inches or longer) or automatic latch on the upper part.

d.The installation of concealed bolt and door leaf must be equipped with a dustproof boot.

6、Technical Documents And Materials

The bidder shall provide relevant technical data, including drawings, manuals, test reports, and other technical materials, in

accordance with the requirements of the User Requirements Specification and in combination with the characteristics of the

bidding product and the actual needs of this project.

Technical data should include but not be limited to the following:

1）List of product descriptions;

2）A detailed description of the main technical indicators and performance of the product;

3）Product related testing, inspection, and testing reports;

4）The main production process of the product;

5）The testing, inspection, and debugging methods of the supplied products;

6）Project implementation progress control plan;

7）Implementation plan for related services;

8）Analysis of product operation and maintenance costs;

1）Bidders should request hardware manufacturers to label and package each hardware item according to the hardware configuration

table, and attach basic installation instructions.

2）The hardware manufacturer will work with the bidder's representative or installer to count the provided hardware until the quantity is

correct and meets the contract requirements.

3）For the convenience of management, the tenderer proposes to use a master key system for the key of the station equipment

management room area, which is set according to the three-level key system and special keys. The details are as follows:

A.Primary key

The highest level key, the first level key, can open all doors of this station (except for special keys)

B. Secondary key

Professional key, secondary key can open all doors of a certain profession. Each profession can develop multiple secondary keys according

to their usage needs, and develop their own range of rooms that can be opened by secondary keys.

C.Third level key

A room key, a third level key, can open all the doors of a room.

D.Special key

a. The keys for opening the connecting passage doors and pump room doors of the entire line section are not included in the overall key

system, but are independently configured;

b.Special facilities such as other line rooms, police rooms, ticketing rooms, vending machine rooms, customer service centers, etc. in the

station equipment management area

The keys of the rooms are individually configured and are not included in the overall key system.

4）Among them, the station equipment rooms involved in the secondary key master key system are divided into three categories, so the

secondary keys are correspondingly divided into three categories. The classification requirements are as follows:

A: The first category is ventilation and air conditioning rooms, including chiller rooms, ventilation and air conditioning rooms, air ducts, air

chambers, etc;

B : The second category of B is the dynamic lighting room, including the lighting distribution room, environmental control and electrical

control room, etc;

C : The third category is water supply and drainage rooms, including sewage pump rooms, wastewater pump rooms, fire pump rooms, etc.

Note: The specific secondary key classification is subject to the final design liaison.

5）The bidder shall be responsible for keeping all hardware items that have been delivered to the site for use in the project but have not

yet been installed.

6）Explanation:：

a.The bidder is required to select the appropriate hardware group from the hardware configuration table for each door of each station

within the scope of this bidding to configure door hardware. Doors that are not fully listed should be selected according to similar doors.

b.The principles and methods for applying hardware groups can be found in the notes after the hardware configuration table

c.In order to facilitate the management of lock cylinders and after-sales maintenance, all hardware products selected by the bidder

(including escape door locks and core locks, hinges, door closers, etc.) must be produced by the same manufacturer, and all door hardware

products should be supplied by the same supplier. The bidder is required to provide the bidder with product authorization documents

from the hardware manufacturer.

d.The door hardware supplier selected by the bidder should have professional planning and graphic integration capabilities for door

hardware to cope with potential hardware configuration changes caused by design changes.

11 Hardware Configuration Table Template

1 N4-01 GFM

GFSM

GHM

GFM

GHM

GFM

GFBM

GFSM

GFM

GHM

GFM

GHM

GFDM

GHM

GFM

GHM

N4-04

N4-07

N4-10

N4-02

N4-05

N4-08

N4-11

N4-03

N4-06

N4-09

N4-12

N4-13

N4-14

N4-15

N4-16

N4-17

N4-18

N4-19

N4-20

N4-21

N4-22

Station Control

Room

Station master

Room

Meeting Room

Police Office

Changing room

Connected aisle

Cleaning tool

room

washroom

AFC

Ticket Office

AFC

Ticket Office

AFC

Maintenance work area

Advertising spare

parts warehouse

Driver's cage

Train inspection

room

Ventilation and air

conditioning room

Vehicle repair

tool room

Thoroughfare

Air duct

Walkway

Anterior chamber

Walkway

Right,

outside

Right,

Steel First class

First class

classroom

lock

classroom

lock

classroom

lock

classroom

lock

classroom

lock

classroom

lock

Bathroom

lock

Bathroom

lock

Storeroom

lock

Storeroom

lock

Storeroom

lock

Storeroom

lock

Storeroom

lock

Storeroom

lock

Storeroom

lock

Channel

lock

Air tight

lock

Push bar

Push bar lock

against wind

pressure

Indicating

bathroom lock

Indicating

bathroom lock

Burglar-proof

lock

SHW-01

SHW-05

SHW-02

SHW-06

SHW-03

SHW-07

SHW-10

SHW-08

SHW-11

SHW-10

SHW-04

SHW-10

SHW-12

SHW-13

SHW-14

SHW-15

SHW-09

SHW-04

no SHW-04

1200 2300

2300

1000

900

1500

1000

1500

1200

1000

1500

1200

1000

1200

1000

1500

1000

Steel

Right,

inside

Right,

inside

Right ,

inside

Right,

inside

Right ,

inside

Right,

inside

Right ,

inside

Right,

inside

Left,

inside

Left ,

inside

Left,

inside

outside

Double,

swing

Single

passage

Public

area

Air duct

Common

area

stairwell

Item Door

number

Door

code Room name Door

leaf

Opening Door Door Door Fireproof

Lock Hardware

direction material width height type Group

Outside

area

Push bar

Right,

outside

Left,

outside

Right,

Left,

Double

Single

European

standard hinge

European standard

classroom lock

Pcs

Set

Hairline

KIN LONG

SHY403030-2BB

ST5572E5--

SSN12730FE

Pcs silver

silver

European standard

door closers

Overload the

sequencer

External single door

magnetic lock

Steel door latch

Dust cans

Half ball doorstop

Pcs KDS15010

SCX12701

4.0*4.0*3.0，200,000 lifetimes，304 stainless

steel main material

European standard EN12209，CE certification，

Passed 1.5 hours of fire resistance testing

and 200000 life tests;

Deputy lock SSN12730-False lock Dummy handle

When power off, the door will be open

Pcs

SSW12604

BBM90105

304 stainless steel，Passed 1.5 hours of fire

resistance testing

304 stainless steel main material, used with latch

European standard EN1154，500,000 lifetimes

SFT12801

SMX12211 304 stainless steel material

6 \"steel door manual hidden latch

Product name Quantity Unit treatment Function description

Hardware group：SHW-01

Brand Model number

Hardware group template

Hairline

Surface

Hairline

13 GGMK

GMKB

KBB2

MKBB

MKBA

MKAB

MKAA

GMKA

KBB1

KBA2

KBA1

KAB2

KAB1

KAA2

KAA1

Key management system

architecture diagram:

Key management systems are often used in apartments, office buildings, commercial spaces and other places. Various sizes, forms and

specials are produced according to different needs.

Functional lock cylinder. With a set of Kinlong Master Key, you can open any door of your company or home as you like, which is safe and

convenient.

The key management system is divided into two-level management lock cylinder, three-level management lock cylinder and four-level

management lock cylinder. The master key of a certain level can open the specified range

All door locks. For example, GMKA can open MKAA, MKAB, KAA1, KAA2, KAB1, KAB2, but cannot open the upper level GGMA

And door locks within the scope of GMKB. The dedicated key of each lock is an independent key, and only the matching lock can be opened.

This system makes the corresponding key management system according to the architecture of each

building

KIN L ONG

Subway project master key architecture diagram

Management center

Transfer center

Dispatch and

control center

Computer

room Office Office Ticketing Crew Office Office Maintenance

office Sub theme Maintenance

warehouse

Bathroom

changing

room

Warehouse Fire passage Warehouse

Administrative and

other departments

Maintenance

department

Security

department

Station maintenance

department

Engineering

maintenance

Cleaning

department

Various stations

Secondary management lock cylinder

The secondary management lock cylinder has a master key, which can open the lock

cylinder of the entire system.The lower level of the master key is divided into multiple

independent keys, and each key opens its own lock cylinder:

MKA

Personal key

Master key

Lock cylinder

15 Hotel hardware decoration solution

Rail transit

hardware

（Catalogue） Hotel hardware hardware Shopping mall

Kinlong offers comprehensive hardware

solutions for eight key sectors.

hardware Office building

School

hardware

hardware Hardbound room

Hospital Airport hardware

hardware

17 19 Equipment room Hardcover matching Escape passage

Fire door Platform level

Tunnel area Platform level

Movable rail

Telescopic railing

Seats/stainless steel trash cans

Movable rail

Telescopic railing

stainless steel trash cans

On-off arrow/sign/blind path sign/blind path

Hall level

Escape lock

Air duct sealed door

Gas-tight door

Tunnel section gate

Access door

Fire door

Waiting area

Bathroom door

Shaft lock/trap door (fire hydrant)

Equipment housing area

Escape door

Security door

Access control system

18 20

Public area Public toilet

Bathroom partition hardware

Ceramic sanitary ware

Toiletry hardware

Separate toilet Changing room

Matching hardware

Bathroom partition hardware Bathroom partition hardware

Ceramic sanitary ware

Toiletry hardware

Safety handrail

Fire door

Equipment/

management occupancy area

Escape door

Security door

Access control system

Common area

Pipe door/trap door (fire hydrant)

Bathroom door Pipe door/trap door (fire hydrant)

Channel region

Open the door with a frame

Hall level

19 Hardware Configuration Solution for Rail Transit

（American Standard Series）

Hardware configuration of spare parts warehouse locks

Hardware configuration of station control room locks

Product name Product model Material Unit Quantity

Aluminum alloy

304 stainless steel Set 1

304 stainless steel

Set 1

Pair

Pcs

1.5

American standard storage

room function lock

American standard

door closer

American standard

level-ll hinge

Door stopper

Equipment room

Spare parts warehouse

High voltage room

Weak current room

ST7092A6-SMB10213

BBM60006

SHY454034-2BB

SMX12211

American standard

classroom lock

Hidden sequencer

ST7092A5-SMB10213

SSW12603

Set

Pcs

False lock

Steel door automatic

latch

SMB10213

SCX12710

Set

Pcs

Dustproof cylinder

American standard

door closer

Door stopper

SHY454034-2BB

SFT12801

BBM60006

SMX12211

Aluminum alloy

Pair

Set

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

level-II hinge Station controller

Conference room

Environmental control

electric control room

Application

Scenarios

Application

Scenarios

21 Walkway lock hardware configuration

Lounge lock hardware configuration

Aluminum alloy

Set 1

Pair

Pcs

1.5

Door stopper 1

Office

Lounge

Tool room

ST7092A3-SMB10213

BBM60006

SHY454034-2BB

SMX12211

A m e r i ca n sta n d a rd

door closer

A m e r i ca n sta n d a rd

office locks

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

level-II hinge

ST7092A1-SMB10213

SSW12603

Set

Pcs

Deputy lock

American standard

channel lock

SMB10213

SCX12710

Set

Pcs

Dust-proof cylinder

Concealed sequencer

Steel door

automatic latch

American standard

door closer

Door stopper

Walkway

Equipment area

passage

SHY454034-2BB

SFT12802

BBM60006

SMX12211

Aluminum alloy

Pair

Set

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

Pcs

A m e r i ca n sta n d a rd

level-II hinge

Application

Scenarios

Application

Scenarios

Hardware configuration of mother and baby room lock

Hardware configuration of self-service ticket vending machine room locks

Anti theft lock

Vending machine rooms

AFC ticketing room

SFDS0207-68 Set 1

Anti-theft hinge

Door stopper

SHY12112

SMX12211

Pair

Pcs

1.5

A m e r i ca n sta n d a rd

door closer BBM60006 Aluminum alloy Set 1

Product name Product model Material Unit Quantity

304 stainless steel

Aluminum alloy

Set 1

Pair

Pcs

1.5

American Standard

Dormitory Locks

Delayed door closer

Changing room

Baby room

Accessible bathroom

Door stopper

ST7092AB-SMB10213

BBM90115

SHY454034-2BB

SMX12211

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

level-II hinge

Application

Scenarios

Application

Scenarios

23 Hardware configuration of locks in public restroom

Hardware configuration of tea room locks Door stopper

Sliding plate

Bead lock

Pantry

Office restroom

SFZ11206

SMX12222

Set

Pcs

SHY454034-2BB 1.5

BBM60006

STB12901

Aluminum alloy Set

Set

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

level-II hinge

American standard

door closer

Aluminum alloy

Set 1

Pcs

1.5

Door stopper 1

Changing room

ST7092A9-SMB10213

BBM60106

SHY454034-2BB

SMX12211

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

level-II hinge

American standard

door closer

P u b l i c B a t h r o o m

Bathroom

American standard

indicating bathroom lock

Application

Scenarios

Application

Scenarios

Pair

上门轴

中门轴

下门轴

Hardware configuration of safety exit locks

Hardware configuration of locking devices for section communication channels

STS11801

BBM60006

Set

STS11802

SSW12604

Set

Pcs

Door stopper

Emergency Exit

Staircase

Equipment area passage

Heavy duty sequencer

External handle lock STS11810

SMX12222

SHY454034-2BB

Set

Pair

Product name Product model Material Unit Quantity

304 stainless steel

304 stainless steel Pcs

A m e r i ca n sta n d a rd

level-II hinge

A m e r i c a n s t a n d a r d

horizontal push bar lock

American standard shootbolt

lock push bar system

American standard

door closer

Set 1

Aluminum alloy

Set 1

Set

Section connection

channel

STS11510

STS11712

BBM60206

SHY12140F

Product name Product model Material Unit Quantity

304 stainless steel

American standard

door closer

Eccentric door spindle

External handle lock

Four point anti wind

pressure push bar lock

Application

Scenarios

Application

Scenarios

25 New air duct door lock hardware configurati

Hardware configuration ofsignal equipment room locks

Aluminum alloy

Set 1

Pcs

1.5

Door stopper 1

New air duct door

Airtight lock SQM46032

BBM60006

SHY454034-2BB

SMX12222

Product name Product model Material Unit Quantity

304 stainless steel

A m e r i ca n sta n d a rd

secondary hinge

American standard

door closer

Door stopper

Integrated access

control machine

Power distribution room

Signal equipment room

Station master's room Wire breaker

American standard

mechatronic lock CML850

SMX12211

KDM22020

Set

Pcs

Set

BBM60006 Aluminum alloy Set 1

SHY454034-2BB

SGX12801 Set

1.5

Product name Product model Material Unit Quantity

304 stainless steel

Plastic

A m e r i ca n sta n d a rd

secondary hinge

American standard

door closer

Application

Scenarios

Application

Scenarios

Pair

Hardware Configuration of Public Bathroom Bathroom

Accessible bathroom bathroom hardware configuration

WSZ45981

WSZ7105B

WDQ20030

WDL3931C-75

WZH10160

WZH20080

WFJ41030

WSZ96220

WSZ96040

Product Model Picture Material

Angle valve

Pop-up drain

Soap

dispenser

Drain pipe

Hand dryer

Floor drain

Tissue box

ABS/white

304 stainless steel

/Matte

Stainless steel

/hairline

304 stainless steel

/Satin

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

WSZ96040

WZH20080

WSZ45981

WFS42110

WFS42090

WDL3931C-75

WFS41010

WSZ7105B

WDQ20030

Product Model Picture Material

Pop-up drain

Hand dryer

Floor drain

Safety

handrails

Safety

handrails

Safety

handrails

Angle valve

Nylon+

304 stainless steel

Nylon+

304 stainless steel

Nylon+

304 stainless steel

/Satin

304 stainless steel

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

ABS/white

Sensor faucet

Integrated trash bin &

toilet paper dispenser

Integrated trash bin &

toilet paper dispenser

Sensor faucet

27 防盗门锁系列 WSZ44010

WYG11080

Angle valve WSZ71090

Product Model Picture Material

304 stainless steel

Basin faucet

Sinks WCP12226

WSH2008A

WFG41020

WSZ45981

WSZ96030

WSZ96220

WSZ71090

HDPE/ grey

Induction

faucet

Angle valve

Product Model Picture Material

304 stainless steel

304 tainless steel

/Satin

Pop-up

drain

Drain pipe Brass/Satin

Brass/

chrome plated

Brass/

chrome plated

Hardware configuration of mother and baby room bathroom

Tea room bathroom hardware configuration

Kitchen Shelves Zinc Alloy/Mirror

Bathroom

Seats

Integrated trash

bin & toilet

paper dispenser

Hardware Configuration Solution for Rail

Transit（European Standard Series）

29 ST6072E6-SSN12730 Set 1

SHY404030-2BB Pair 1.5

Door stopper

Equipment area

Spare parts warehouse

Strong (weak)

electrical room

European standard

door closer

European standard hinge

European standard

storage room lock

BBM90006

SMX12211

aluminum alloy Set

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

Hardware configuration of weak current room locks

Hardware configuration of locks in the environmental control electric control room

ST5572E5-SSN12730

SSW12602

Set

Pcs

SSN12730

SCX12701

Set

Pcs

European standard hinge

European standard

door closer

European standard

classroom lock

Manual latch for steel

doors

Station controller

Meeting Room

Environmental control

electric control room

SHY404030-2BB

SFT12801

BBM90006

SMX12211

aluminum alloy

Pair

Set

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

Deputy lock

Sequencer Application

Scenarios

Application

Scenarios

Door stopper

Dust socket

Walkway lock hardware configuration

Office lock hardware configuration

aluminum alloy

Set 1

Pair

Pcs

1.5

Door stopper 1

Office

Lounge

Tool room

SSN12730FE

BBM90006

SHY404030-2BB

SMX12211

European standard

door closer

European standard hinge

European standard

office lock

Product name Product model Material Unit Quantity

304 stainless steel

ST6072E1-SSN12730FE

SSW12602

Set

Pcs

SSN12730

SCX12701

Set

Pcs

Door stopper

Manual latch for

steel doors

SHY404030-2BB

SFT12802

BBM90006

SMX12211

Aluminum alloy

Pair

Set

Pcs

European standard

door closer

European standard hinge

European standard

channel lock

Product name Product model Material Unit Quantity

304 stainless steel

Sequencer

Equipment area passage

Walkway

Application

Scenarios

Application

Scenarios

Dummy lock

Dust socket

31 Accessible bathroom lock hardware configuration

AFC ticketing room lock hardware configuration Set 1

Aluminum alloy

Pair 3

Set

Pcs

Door stopper 1

Anti theft hinge

Anti-theft lock SFDS0207-68

SHY12111

BBM90006

SMX12211

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

Ticket vending machine

room

AFC Ticket Office

Aluminum alloy

Set 1

Pair

Pcs

Door stopper 1

ST6072E4-SSN12700

BBM90006

SHY404030-2BB

SMX12211

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

European standard

bolt lock

European standard hinge

Changing room

Nursery

Accessible restroom

Application

Scenarios

Application

Scenarios

Hardware configuration of lockers in the changing room

Hardware configuration of office restroom locks

Set 1

Aluminum alloy

Pcs 1

Pair

Pcs

Door stopper 1

Office restroom

Pantry Bead lock

Sliding plate STB12901

SFZ11206

SHY42135

SMX12222

Product name Product model Material Unit Quantity

304 stainless steel

Aluminum alloy

Set 1

Pair

Pcs

Door stopper 1

ST6078E9-SSN12730

BBM900115

SHY404030-2BB

SMX12211

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

E u r o p e a n s t a n d a r d

indicating bathroom lock

European standard hinge

Public area restroom

changing room

Application

Scenarios

Application

Scenarios

Hydraulic hinge

33 Set 1

Aluminum alloy

Set 1

Set

STS11510

STS11712

BBM60206

SHY12140F

Product name Product model Material Unit Quantity

304 stainless steel

Section connection

channel

Eccentric door spindle

American standard door

closer

External handle lock

Four point anti wind

pressure push bar lock

Upper door shaft

Middle door axis

Lower door shaft

Hardware configuration of staircase lock

Hardware configuration of locking devices for section communication channels STS11701

BBM90006 aluminum alloy

Set

STS11702

SSW12604

Set

Pcs

Door stopper

STS11712

SMX12222

SHY404030-2BB

Set

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

Equipment area passage

Staircase

Emergency Exit

Overload sequencer

European standard hinge

External handle lock

European standard shootbolt

lock push bar system

E u r o p e a n s t a n d a r d

horizontal push bar lock

Application

Scenarios

Application

Scenarios

Hardware configuration of locks in the station master's room

New air duct door lock hardware configurati

Aluminum alloy

Set 1

Pcs

Airtight lock

Door stopper

New air duct door

SQM46032

BBM90006

SHY404030-2BB

SMX12222

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

European standard hinge

Door stopper

KDM22020

ST6072TD-SSN12730-EU

SMX12211

Plastic Set

Set

Pcs

BBM90115 Aluminum alloy Set 1

SHY404030-2BB

TD454030

Pcs

Product name Product model Material Unit Quantity

304 stainless steel

European standard

door closer

Integrated access

control machine

European standard

mechatronic lock

European standard hinge

Power distribution room

Signal equipment room

Station master's room

Thread passing hinge

Application

Scenarios

Application

Scenarios

35 Hardware Configuration of Public Bathroom Bathroom

Accessible bathroom bathroom hardware configuration

WSZ96040

WSZ96220

WSZ45940

WSZ7110H/C

WDQ20010

WFS42110

WFS42090

WDL3931C-75

WFS41010

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

Nylon +

304 tainless steel

Nylon +

304 tainless steel

Nylon +

304 tainless steel

/Satin

ABS/white

Angle valve

Pop-up drain

Drain pipe

Hand dryer

Floor drain

Safety

handrail

Safety

handrail

Safety

handrail

Product Model Picture Material

WSZ45984

WSZ7110H/C

WDQ20010

WDL3012C

WZH10160

WZH30060

WFJ41030

WSZ96210

WSZ96010

Aluminum alloy

ABS/white

ABS

Angle valve 304 tainless steel

/Satin

Pop-up drain

Soap

dispenser

Drain pipe

Hand dryer

Floor drain

Tissue box

Brass/

chrome plated

Brass/

chrome plated

Brass/

chrome plated

304 stainless steel/

chrome plated

Product Model Picture Material

Sensor faucet

防盗门锁系列

Hardware configuration of mother and baby room bathroom

Tea room bathroom hardware configuration

WSZ44010

WYG11080

WSZ71090

304 stainless steel

Angle valve

Product Model Picture Material

Sink WCP12233

WSH2008A

WFG41010

WSZ96010

WSZ96210

WSZ71090

HDPE/grey

304 stainless steel

Brass/Satin

Brass/

chrome plated

Brass/

chrome plated

304 tainless steel

/Satin

Product Model Picture Material

Induction

faucet

Angle valve

Pop-up drain

Drain pipe

WSZ45984

Integrated

trash bin &

toilet paper

dispenser

Bathroom Seats

Basin faucet

Kitchen Shelves

37 Lock hardware typical

picture book

Door lock hardware series

39 American standard lock series

148

104.5

92 61.6

31.5

21.5

162

16.3

ST7092A American standard lock body

SMB10211 American standard fire lock

SMB10212 American standard fire lock

SMB10213 American standard fire lock

SMB10214 American standard fire lock

American standard handle cover ring SX-008 Cylinder 11,5

122

SMB10213F American standard fire lock

American standard lock fireproof series

Comply with American ANSI/BHMA A156.13 Grade 1 standard

Passed ANSI certification, passed UL certification

Suitable for steel or wooden entrance doors, villa doors, etc.

8 lock bodies with different functions to choose from,

suitable for different places

1 million times of opening life, sturdy and durable, the latch

bolt is adjustable

The function switch button can easily switch the function of

door lock and channel lock

The safety tongue can prevent the latch bolt from being

inserted

Equipped with s slot single row 6 ball marble lock cylinder

Center to center distance: 70mm

Hole center distance: 92mm

Applicable door thickness: above 45mm

(centered installation)

Each model has a different maximum door thickness

applies to. If it's beyond the max thickness, some

fiitings need be customized

Cover plate: 304 Stainless steel

Mounting screws: Stainless steel

Surface treatment:Stainless steel hairline

Function Model

Office lock

Classroom lock

Storage room lock

Dormitory Lock

Entry lock

Apartment lock

Indicative public

restroom lock

Channel lock ST7092A1-SMB10211

ST7092A3-SMB10211

ST7092A5-SMB10211

ST7092A6-SMB10211

ST7092A9-SMB10211

ST7092AB-SMB10211

ST7092AC-SMB10211

ST7092AD-SMB10211

Office lock

Classroom lock

Storage room lock

Dormitory Lock

Entry lock

Apartment lock

Indicative public

restroom lock

Channel lock

Model

ST7092A1-SMB10212

ST7092A3-SMB10212

ST7092A5-SMB10212

ST7092A6-SMB10212

ST7092A9-SMB10212

ST7092AB-SMB10212

ST7092AC-SMB10212

ST7092AD-SMB10212

Function

Office lock

Classroom lock

Storage room lock

Dormitory Lock

Entry lock

Apartment lock

Indicative public

restroom lock

Channel lock

Model

ST7092A1-SMB10214

ST7092A3-SMB10214

ST7092A5-SMB10214

ST7092A6-SMB10214

ST7092A9-SMB10214

ST7092AB-SMB10214

ST7092AC-SMB10214

ST7092AD-SMB10214

Function

Office lock

Classroom lock

Storage room lock

Dormitory Lock

Entry lock

Apartment lock

Indicative public

restroom lock

Channel lock ST7092A1-SMB10213

ST7092A3-SMB10213

ST7092A5-SMB10213

ST7092A6-SMB10213

ST7092A9-SMB10213

ST7092AB-SMB10213

ST7092AC-SMB10213

ST7092AD-SMB10213

Function Model

American standard apartment fire lock

American standard channel fire lock

American standard classroom fire lock

American standard storage room fire lock

ST7092A1-SMB10213F

ST7092A5-SMB10213F

ST7092A6-SMB10213F

SMB10213F

Function Model

Certified by ANSI and UL;

Comply with GB12955-2008 fire test

and pass fire protection certification;

American standard lock function introduction

ST7092A1

ST7092A3

ST7092A5

ST7092AC

ST7092A9

ST7092AB

ST7092AD

ST7092A6

KINL ONG

KIN L ONG

K G

NO. Function type Model Diagram Function description

Passage door

lock

Office lock

Classroom lock

Entrance door

lock

Indicative

public toilet

lock

Dormitory

lock

Apartment

lock

Storeroom

lock

Outdoor: Under any circumstances, the outer handle can be pressed down to

unlock

Indoor: Under any circumstances, the inner handle can be pressed down to

unlock

Outdoor: 1. The key can be unlocked at any time

2. The key locks or unlocks the outer handle

3. When the outer handle is locked, the outer handle cannot be pressed down

to unlock

Indoor: 1. The inner handle can be pressed down to unlock at any time

2. The knob can lock or unlock the outer handle

Outdoor: 1. The key can be unlocked at any time

2. The key locks or unlocks the outer handle

3. When the outer handle is locked, the outer handle cannot be pressed down

to unlock

Indoor: 1. The inner handle can be pressed down to unlock at any time

Outdoor: 1. The key can be used to unlock under any circumstances

2. When the room is locked with a key, the outer handle cannot be pressed

down, only the key can be used to unlock

Indoor: 1. The inner handle can be pressed down to unlock at any time

2. The key locks or unlocks the outer handle

Outdoor: 1. Coins can be used to retract the bolt outside under any circumstances, with

indication function

2. When the indoor knob is locked (with the tongue bolt out), the outer handle cannot be

pressed down to unlock

3. When the tongue is bolt, the outer handle can be pressed down to unlock

Indoor: 1. Under any circumstance, you can open the door by pressing the handle outside

2. The inner handle has an escape function (retract the latch bolt and the dead bolt at the

same time), and unlock the outer handle

3. The knob can stick out the bolt and lock the outer handle at the same time

Outdoor: 1. The key can be used to unlock under any circumstances

2. When the indoor knob is locked (with the bolt sticking out), the outer handle cannot be

pressed down to unlock

3. When the bolt is retracted, the outer handle can be pressed down to unlock,

Indoor: 1. Under any circumstances, the inner handle can be pressed down to open the door

2. The inner handle has an escape function (retract the latch bolt and the dead bolt at the same

time), and unlock the outer handle

3. The knob can stick out the bolt and lock the outer handle at the same time

Outdoor: 1. The key can be used to unlock under any circumstances

2. When the indoor knob is locked (with the bolt sticking out), the outer handle cannot be

pressed down to unlock

3. When the bolt is retracted, turn the knob up 20° to unlock the outer handle. At this time,

the outer handle can be down.

Press to unlock

Indoor: 1. The door can be opened by pressing the inner handle under any circumstances

2. The inner handle has an escape function (retract the latch bolt and the dead bolt at the

same time)

3. The knob can stick out the bolt and lock the outer handle at the same time

4. When the bolt is retracted, turn the knob 20° to unlock the outer handle

Outdoor: 1. The key can be unlocked at any time

2. The outer handle is always fixed and cannot be pressed down to unlock

Indoor: 1. The inner handle can be pressed down to unlock at any time

CERTIFICATE OF COMPLIANCE

Certificate Number 20190510-R39782

Report Reference R39782-20190111

Issue Date 2019-May-10

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please

contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 2

Issued to: GUANGDONG KIN LONG PRECISION PRODUCTS CO

LTD

NO.88 Guangfu Rd, Tongle Village,Dongsheng Town

Zhongshan City, Guangdong 528414 CHINA

This certificate confirms that

representative samples of

SINGLE-POINT LOCKS AND LATCHES

See Addendum Page for Models/Product

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10C - Positive Pressure of Fire Tests of Door

Assemblies

Additional Information: See the UL Online Certifications Directory at

https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up

Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s

Follow-Up Services.

Look for the UL Certification Mark on the product.

American Standard Lock Certificate

American standard mortise lock ANSI certificate

American standard mortise lock fire certification certificate American standard mortise lock fire certification certificate

UL certificate for American standard mortise lock

43 European standard lock series

快速跳转到指定页