该页无缩略图
COMPREHENSIVE FLEETTELEMATICSPRODUCT SERIESFOROPTIMIZED FLEETPERFORMANCE
深
&
LTE/GSM Connectivity
Multiple Positioning
Driving Behavior Analysis
Remote
Cut-Off
(Fuel/Power)
Ignition Detection
On-Board Diagnostics
JimiloT
JM-VL02 LTE Cat M1 & NB2 Fleet Tracker
The JM-VL02 is designed to handle industrial and commercial fleet applications ranging from rental agencies and public transportation to construction equipment and beyond.With ACCdetection SOsbutton remote fuel/power cutoff and various other I/Os for peripherals this powerful device can be customized to streamlineyouroperationsand boost efficiency. Built with a cutting-edge communications module leveraging the Cat-M1/NB-loT networks with GSM fallback, the JM-VL02 will be helping to maximize your fleet operations for years to come.
Construction Machinery
Jimi loT Co., Ltd. Official site:www.jimiiot.com Email: info@jimiiot.com
4G
LTECatM1/NB2&GSM
Communicationsover loT-specific LTEnetworkswith reliable2G GSMfallback.
Remote Cut-Off (Fuel/Power)
Immobilize a vehicle by cutting off its power source/fuel supply via an installed relay.
Ignition Detection
Constantly detect the ACC/ignition status of the vehicle.
Panic Button
Contact dispatch or emergency support with a discreet, in-cabin SOs button.
Door Status Detection
Useful insight into thestatusofa fleetvehicle;be alerted ifadoor isunexpectedlyopened.
Fuel/Temperature Sensor (Optional)
Optional peripherals tomonitor fuel level or temperatureaddvisibilitytoyouroperationsand help save money.
RFID Reader (Optional)
Identify drivers when they start vehicles, and collect andupload the drivers' identification.
MultipleAlerts
Instant alerts for atypical events such as impounding geo-fence entry/exit, abnormal vibration, speeding. etc.
| Standard Configuration | |||
| Positioning& Location | Interface | ||
| Technology | GPS. LBS, GLONASS | LED indication | GNSS (Blue),Cellular (Green),Power (Red) |
| Accuracy | SIM | Standard-SIM | |
| Tracking sensitivity | -165dBm | Digital I/Os | 1*ACC,1*SOs,1*Relay 1*Reserved output, |
| Acquisition sensitivity | -148dBm | 1*Reserved input | |
| TTFF (open sky) | Avg. hot start ≤1sec；Avg.cold start ≤32sec | Analog I/Os | 1:0-30VDC (±0.3V) |
| Voltage detection | N/A | ||
| Cellular | Memory capacity | 1000 GPS data entries | |
| Technology | LTE Cat M1& NB2,GSM | USB | N/A |
| GNSS antenna | Internal | ||
| JM-VL02A: | Bluetooth antenna | N/A | |
| Frequency | LTE: B1/B2/B3/B4/B5/B12/B13/B28/B66 GSM: 850/900/1800/1900 MHz | Serial ports | TTL |
| JM-VL02E: | |||
| LTE: B1/B3/B5/B8/B18/B19/B20/B26 | Feature | ||
| GSM: 850/900/1800/1900 MHz | |||
| Sensors | Accelerometer | ||
| Vehicle movement alert, Over-speed alert, | |||
| Scenarios | Geo-fence,Vehicle batterydetection | ||
| Power | |||
| Driving behavior | Power supply disconnection | ||
| Battery | 300mAh/3.7V industrial-grade Li-Polymer | analysis (DBA) | Harsh acceleration Harsh braking |
| Input voltage | battery | Bluetooth | Harsh cornering Collision N/A |
| 9-36VDC Standby: 5mA | Configuration support | PC ToOls SMS,GPRS | |
| Power consumption | Working:58mA | Certification | CE, FCC, PTCRB,AT&TT-Mobile, Verizon |
| Operating environment | Physical specification | ||
| Operating temperature -20℃ to +70℃ | Dimensions | 105× 57.0×22mm 103g | |
| Operating humidity | 5% to 95%,non-condensing | Weight | |
| IP rating | IP65 | ||
Optional Configuration\*
RS232 sensor Capacitive fuel level sensor Ultrasonic fuel level sensor Temperature sensor RFID reader \*Optional Configuration required to be customized or purchased separately.
JimiloT
VL501 LTEVehicleTerminal
The VL501 is a plug-and-play tracker with GNSs, LTE,and Bluetooth connectivity. With a cigar lighter power connector it is easy to install on virtually any vehicle. It is an ideal choice for individuals as well as fleet managers who would like to track their vehicles in applications such as courier delivery car rental and leasing insurance telematics (UBl),and more. The considerate design of the USB-A and Type-C portsmake the charge of other devices like cellphone much more convenient; while the OTA makes firmware upgrade easier.
Usage-based Insurance
山
Plug and Play
Easy to install via the cigarette lighter power connector.
A
Driving Behavior Analysis (Basic)
Receive alerts when any of 4 kinds of dangerous driving behavior isdetected.
\~D
Remote Listen-in (NA only)
Inconspicuousmic allows for remote audio monitoring of the environment around the device.
Fast Charging Design
Fast charge other devices via the USB or Type-C port usingadvancedtechnologiesorprotocols.
Panic Button
Contact dispatch or emergency support with a discreet,in-cabin SOs button.
MultipleAlerts
Alert drivers on the very first position fix,speeding driver fatigue,or entering or leaving a geofence via a buzzer.
| Standard Configuration | |||
| Positioning & Location | Interface | ||
| Technology | GPS,GLONASS,AGPS,QZSS | LED indication | Power (Red): SOS (Blue) |
| Accuracy | SIM | Nano-SIM | |
| Tracking sensitivity | -165dBm | Digital I/Os | N/A |
| Acquisition sensitivity | -148 dBm (cold)/-157 dBm (hot) | Analog I/Os | N/A |
| TTFF (open sky) | Avg. hot start ≤1sec;Avg.cold start ≤32sec | Memory capacity | 1000 GPS data entries 1*USB-A (for quick charge) |
| Cellular | USB | 1*Type-C (for quick charge, upgrade, | |
| Technology | 4G Cat 1,LTE M1& NB2 VL501-N: | GNSS antenna | and debugging) Internal |
| Frequency | LTE-FDD (Cat 1): B2/B4/B5/B12/B13 | Bluetooth antenna | Internal |
| VL501-J: LTE-FDD (Cat M1& NB2):B1/B3/B8/B18/B19/B26 | Serial ports | N/A | |
| Power | Feature | ||
| Battery | 50 mAh/3.7V | Voice monitoring range | ≤5meters |
| Input voltage | 9-36VDC | Sensors | Accelerometer and gyroscope |
| Sleep: typ.≤12V/15mA | Microphone | Internal | |
| Power consumption | GPS and cell enabled: typ. ≤12V/120mA | Firmware update | OTA |
| Scenarios | Collision alert, Low external power alert, | ||
| Operatingenvironment | Vibrating alert, Unplug alert, Installation alert, | ||
| Operating temperature -20℃ to +70℃ | Speeding alert, Fatigue driving alert, Geo-fence entry/exit alert | ||
| Operating humidity IP rating | 5% to 95%, non-condensing | Bluetooth | BLE4.0 |
| N/A | Configuration support | SMS, Tracksolid Pro, PC Tools | |
| Physical specification | Certification | CE, FCC | |
| Dimensions 70.0 × 52.0× 82.5 mm | |||
| Weight | |||
| 60g | |||
Optional Configuration\*
JimiloT
VL502 (A) LTE OBDII GNSS Tracker
The VL502 (A) is a new generation of 4G Cat M1 OBDll tracker forcorporate cars, usage-basedinsurance, fleet management,and individual carswhich canobtain vehicle data such as VIN code, engine speed,water temperature, accumulated mileage, etc.With the UBl-based algorithm for driving behavior analysis， the VL502 (A)can accurately analyze any of 4 kinds of dangerous driving behavior and support the all-round monitoring of vehicles' real-time status.
Usage-based Insurance
4G
LTECatM1Network
Stable communication via loT-specific 4G LTE network.
On-Board Diagnostics
Obtain real data of vehicle (accurate mileage, fault code, ACC status fuel consumption statistics, battery voltage, engine speed,etc.)
回
GPS Positioning
Complementary positioning system ensures the locations to be accurately displayed oncloud platform.
H
Driving Behavior Analysis (Basic)
Receive alerts when any of 4 kinds of dangerous drivingbehavior isdetected.
MultipleAlerts
Instant alerts for atypical events such as car fault, overspeed, ignitiondetectioncollision geo-fence entry/exit, etc.
Effortless Installation
Simply plug this device into the OBDll socket, you don't have to turnto professionals.
Standard Configuration
| Technology | GPS, GLONASS, AGPS, LBS | LED indication | Red (Power), Blue (GNSS), Green (CATM) | |
| Accuracy | SIM | Nano-SIM | ||
| Tracking sensitivity | -162 dBm | DigitalI/Os | N/A | |
| Acquisition sensitivity | -148 dBm (cold):-156 dBm (hot) | Analog I/Os | N/A | |
| TTFF (open sky) | Avg. hot start ≤1sec; Avg.cold start ≤32sec | Voltage detection | 0-36V (±0.3V) | |
| Cellular | Memory capacity USB | 4000 GPS data entries Micro-USB | ||
| Technology LTE Cat M1& NB2 Cat M1: B2/B4/B5/B12/B13 | GNSS antenna | Internal | ||
| Frequency | Bluetooth antenna | Internal | ||
| Cat NB2: B2/B4/B5/B12/B13 | Serial ports | N/A | ||
| OBD Port OBDIl port | Feature | |||
| Connection Data | K-Line, CAN Bus | Voice monitoring range N/A Sensors | Accelerometer | |
| ISO 9141-2 (5 baud init, 10.4 kbaud) | ||||
| Vehicle movement alert, Ignition detection | ||||
| ISO 14230-4 KWP (5 baud init,10.4 kbaud) | Scenarios | Speeding Collision Geo-fence entry/exit, | ||
| ISO 14230-4 KWP (fast init,10.4 kbaud) | Vehicle battery detection Power supply | |||
| ISO 15765-4 CAN (11 bit ID, 250 kbaud) | disconnection | |||
| ISO 15765-4 CAN (11 bit ID, 500 kbaud) | Driving behavior | Harsh acceleration Harsh braking | ||
| ISO 15765-4 CAN (29 bit ID, 250 kbaud) | analysis (DBA) | Harsh cornering Collision | ||
| ISO 15765-4 CAN (29 bit ID, 500 kbaud) | Bluetooth | BLE 4.2 | ||
| SAE J1939 CAN(29 bit ID, 250 kbaud) SAE J1939 CAN(29 bit ID, 500 kbaud) | Configuration support | SMS,Tracksolid Pro,PC Tools | ||
| Power | Certification FCC | |||
| Battery 180mAh/3.7V | Operating temperature -20℃ to +70'C | |||
| Input voltage | 9-36VDC | Operating humidity | 5% to 95%,non-condensing | |
| Power consumption | Standby:≤5mA | IP rating N/A | ||
| Physical specification | ||||
| Dimensions 65.0 × 50.0×25.0mm | ||||
| Weight 65g | ||||
| Optional fiaurati | ||||
Inertial Measurement Unit (IMU)
\*Optional Configuration required to be customized or purchased separately.
JimiloTLinkedIn
us.jimiiot.com
JimiloT Making Connections Simpler
