该页无缩略图
JiongTai炯泰
机床特点|CHARACTERISTICS OF MACHINE TOOL床脚整体一体化设计制造，采用树脂砂铸造，经时效处理变形小，具有很高的稳定性和刚性。导轨宽度335mm，采用超音频淬火，托板贴塑。6140H-750适合高转速加工铜，铝等光洁度要求高的零件，选配高精度主轴专用轴承，进口专用轴承润滑脂，整个主轴单元热变形小，精度保持性好。6140B-750为齿轮箱三档变频，低速扭矩大，适合加工钢铸铁等零件。
The bed foot is designed and manufactured in an integrated way: It is cast with resin sand. After aging treatment the deformation is smail, and it has high stabiity and rigidity. The width of the guide rail is 335mm, which is quenched by ultra-audio frequency, and the supporting plate is pasted with plastic. 6140H-750 is suitable for processing copper, aluminum and other parts with high finish requirements at high speed. It is equipped with high-precision special bearing for main shaft and imported special bearng grease. The whole main shaft unit has small themal deformation and good accuracy retention. The 6140B-750 is a gear box with three-gear frequency corversion and large low-speed torque, sultabie for processing steel, cast iron and other parts.
CK6140
详细配置清单|DETAILED CONFIGURATION LIST
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系CE | 南京开通 Nanjing kaitong | 可选配广数，凯恩帝等系统 It can be equipped with Guangshu, Kandi and other systems | |
| X轴电机 X-axis motor | 6NM | 南京开通 Narjing kaitong | |
| Z轴电机 Z-xis molor | 10NM | 南京开通 Narjing kaitong | |
| 变频器 Frequency converter | 11KW | 国产estic | |
| 主电机 | 7.5KW | ||
| 四工位刀架 Four station tool rest | 6140 | 三和/文具 | |
| 手动卡盘 Manual chuck | 250三爪 250 three dlaw | 科菲勒 Cofoler | 科选装液压卡盘（科普特） KOPIT optional hydraulic chuck |
| 冷却泵 Cooing pump | 210W | ||
| 自动润滑系统 Automatic lubrication system | 齿轮泵 Gear pump | 国产 Domestic |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 ITEM | 6140H-750 | 6140B-750 | ||||
| 工作范围 Soope of work | 床身最大的回转直径 Mamum tuming dameter of the bed | Φ420mm | Φ420mm | |||
| 通过滑板最大回转直径 Maximum tuming dameter through sliding plate | Φ210mm | Φ210mm | ||||
| X轴(横向)最大行程 Maximum travel of X-axis (transverse) | 295mm 大行程 295mm long stroke | 295mm | ||||
| Z轴(纵向)最大行程 Maximum travel of Z axs (longitudinal) | 750mm | 750mm | ||||
| 床身 | 床身导轨宽度 Width of bed guide rail | 335mm | 335mm | |||
| 最大顶尖度 Maximum centricity | 750mm 整体床脚 750mm integral bed foot | 750mm 整体床脚 750mm integral bed foot | ||||
| 主轴 principal axis | 主轴头型号 Man shalt head model | A2-6 | D-6 | |||
| 主轴内孔锥度 Spindle inner hole taper | MT6# | MT6# | ||||
| 主轴孔径(独立主轴) Spindle diameter (independent spindle) | Φ58mm | Φ58mm | ||||
| 主轴转速 Spindle speed | 200-3200r/mm | 齿轮箱三档无极变速60-300;250-800:600-2000rpm | ||||
| 主轴电机功率 Spindle motor power | 7.5KW | 7.5KW 主电机 | Gearbox three-speed slepless speed 60-300; 250-800; 600-2000rpm | |||
| 手动夹头尺寸 | 三爪卡盘Φ250mmm | 7.SKW main motor 三爪卡盘Φ250mm | ||||
| Manual coliet size X轴丝杆/Z轴丝杆(型号) | 2505/3210 | Three-w dhuck Φ 250mm 2505/3210 | ||||
| X-axis screw rod 100-axis screw rod (model) X轴/Z轴电机扭矩 X-axsZ-axis motor torque | 6NM/10NM | 6NM/10NM | ||||
| 工作精度 Working accuracy | X/Z 轴快速进给速度 | 6m/min;8m/min | 6m/min;8m/min | |||
| Rapid feed speed of X/Z axis 定位精准 Accurate positioning | X轴(横向)≤0.01mm；Z轴(纵向)≤0.015mm X axis (transverse) ≤ 0.01mm: Z axs (ongitudinal) s 0.015mm | X轴(横向)≤0.01mm;乙轴(纵向)≤0.015mm X axis (transverse) ≤ 0.01mm; Z axs (longltudinal) ≤ 0.015mm | ||||
| 重复定位精准 Repetitive positioning accuracy | X轴(横向)≤0.0075mm；Z轴(纵向)≤0.010mm X-axis (transverse) ≤ 0.0075mm; Z axs (ongitudinal) ≤ 0.010mm | X轴(横向)≤0.0075mm；Z轴(纵向)≤0.010mm X-axis (transverse) ≤ 0.0075mm; Z axs (ongitudinal) ≤ 0.010mm | ||||
| ≤0.007mm | ≤0.007mm | |||||
| 直径一致性 Diameter uniformity | ≤0.03mm/长度300mm ≤ 0.03mm/Length 300mm | ≤0.03mm/长度300mm | ||||
| 平面度 Flatness | ≤0.02mm/直径300mm ≤ 0.02mmDiameter 300mm | ≤ 0.03mmLength 300mm ≤0.02mm/直径300mm | ||||
| 表面粗糙度(钢件) | ≤Ra1.6um | ≤ 0.02mm/Diametler 300mm | ||||
| Surlace roughness (steel parts) 形式 | 四工位刀架 | ≤Ra1.6um 四工位刀架 | ||||
| 刀架 Servo shalt | 四方刀具 Square cutter | Four-position tool holder 25mm X 25mm | Four-position tool holder | |||
| 尾座套简直径 Diameter of talstock sleeve | Φ65mm | 25mm X 25mm Φ65mm | ||||
| 尾座 Tailstock | 尾座套简行程 Simple stroke of tailstock sleeve | 150mm | 150mm | |||
| 尾座顶尖锥孔 Who hole is at the top of tailstock | MT4# | MT4# | ||||
| 电源规格(标准配置) Power specfication (standard configuration) | 三相380V/50HZ Three-phase 380V/50HZ | 三相380V/50HZ | ||||
| 股规 General rule | 外形尺寸 Overal dimension | 2200X1400X 1700mm | Three-phase 380V/50HZ 2200X1400X 1700mm | |||
| 净重 Net weight | 1700kg | 1700kg | ||||
详细配置清单|DETAILED CONFIGURATION LIST
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系统E | 南京开通 Nanjing kaitong | 可选配广数，凯恩帝等系统 It can be equiped wth Guangshu, Kandi and other systems | |
| X轴电机 X-ais motor | 6NM | 南京开通 Narjing kaitong | |
| Z轴电机 Z-is molor | 10NM | 南京开通 Norjing kaitong | |
| 变频器 Frequency converter | 11KW | 国产 | |
| 主电机 | 7.5KW | 可选配11KW Optional 11KW | |
| 四工位刀架 Four station tool rest | 6150 | 文昌 Wenchang | 可选配6163刀架 6163 lool rest optional |
| 手动卡盘 Manual chuck | 250三爪 250 three daw | 科菲勒 Coleler | 科选装液压卡盘（科普特） KOPIT optional hydraulic chuck |
| 冷却泵 Cooing pump | 210W | Boreestic | |
| 自动润滑系统 Automasic lubrication system | 齿轮泵 Gear pump | 国产 Domestic |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 单位 UNIT | CK6150-500 | |||||
| 工作范围 Scope of work | 床身上最大工件回转直径 Maximum workpiece rotation dameter of bed body | mm | Φ500 | |||
| 最大加工长度 Maximum machining length | mm | 290 | ||||
| X轴 The X axis | mm | 295 | ||||
| z轴最大行程 Maximum Z-axis stroke | mm | 500 | ||||
| 床身 | 床身导轨宽度 Width of bed ral | mm | 405,托板贴塑，整体床脚 405, palet pasting, integral bed foot | |||
| 最大顶尖距离 Maximum apex distance | mm | 500,1000,100,2000 | ||||
| 主轴头型号 Spindie head type | A2-8 | |||||
| 主轴 principal axis | 主轴内孔锥度 Taper of spinde inner hole | 公制90号(1:20) Metic No. 90 (1:20) | ||||
| 主轴孔径 Main shaft aperture | mm | Φ82 | ||||
| 主轴转速 Spindie speed | r/min | 三档变频，档内无极变速，45-260,140-800,280-1600 Three speed vanable frequency, stepiess speed change in gear, 45-260140-800280-1600 | ||||
| 主轴电机功率 Spindle motor power | KW | 普通电机7.5/可选配11 Ordinary motor 7.5optional 11 | ||||
| 手动三爪夹头尺寸 Manual three - jaw oollet dimensions | 手动三爪卡盘250 Manual three aw chuck 50 2505/4010 | |||||
| Servo shalt | X/Z向滚珠丝杆 X/Z ball screw | |||||
| X轴/Z轴电机功率 X iZ axis molor power | NM | 6/10 | ||||
| 工作精度 Working acouracy | 快速进给速度 Fast leed speed | m/min | 6;8 | |||
| 定位精度 Postioning acouracy | mm | X轴（横向）≤0.01 Z轴（纵向）≤0.015 X axis (transverse) ≤ 0.01 Z axis (longitudinal) ≤ 0.015 | ||||
| 重复定位精度 Repeafed positioning accuracy | mm | X轴（横向）≤0.01 Z轴（纵向）≤0.01 X axis (transverse) ≤ 0.01 Z axis (longitudinal) ≤ 0.01 | ||||
| mm | ≤ 0.007 | |||||
| 直径一致性 Consistency in diameter | mm | ≤0.03/长度300 ≤ 0.03/Length 300 | ||||
| 平面度 Flatness | mm | ≤0.02/直径300 ≤ 0.02/Dameter 300 | ||||
| 表面粗糙度（钢件） Surface roughness (steel parts) | um | ≤Ra1.6 | ||||
| 尾座 Taistock | 尾座套简直径 Diameter of taislock sleeve | mm | Φ75 | |||
| 尾座套简行程 Talstock sleeve stroke | mm | 150 | ||||
| 尾座顶尖锥孔 Taper hole of taistock center | MT5# | |||||
| 电源规格及容量（标准配置） Powar specification and capacity (standard configuration) | 三相380V/50HZ Three phase 380V/50HZ | |||||
| 外形尺寸（一米机床） Overall dimensions (one meter machine tool) | mm | 2700*1500*1900 | ||||
| 净重 Net weight | KG | 2000 | ||||
JiongTai炯泰
机床特点|CHARACTERISTICS OF MACHINE TOOL一体式床身床脚，采用树脂砂铸造，实效处理，采用超音频淬火，托板贴塑。
通孔Φ82mm主轴，三点支承，四道轴承的高刚性主轴系统，绝对温升小于25℃，尾座具有双重锁紧机构，底部装有弹性滚轮，滚动轻便省力。
One-piece bed body and foot are cast with resin sand, effectively treated. and quenched with ultra-audio frequency. The supporting piate is pasted with plastic. Through-hole 82mm main shaft. three-point support. four-bearing high rigid main shaft system, absolute temperature rise less than 25 °C. tailstock with double locking mechanism, elastic roler at the bottom, easy and labor-saving rolling.
CK6150B-1000
详细配置清单|DETAILED CONFIGURATION LIST
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系统 | 南京开通 Nanjing kaitong | 可选配广数，凯恩帝等系统 It can be equipped with Guangshu, Kandi and other systems | |
| X轴电机 X-a moor | 6NM | 南京开通 Naning kaitong | |
| Z轴电机 Z-is molor | 10NM | 南京开通 Norjing kaitong | |
| 变频器 Frequency converter | 11KW | 国产 | |
| 主电机 | 7.5KW | 可选配11KW Optional 11KW | |
| 四工位刀架 Four station lool rest | 6150 | 文昌 Wenchang | 可选配6163刀架 6163 tool rest optional |
| 手动卡盘 Manual chuck | 250三爪 250 three daw | 科菲勒 Coleder | 科选装液压卡盘（科普特） KOPIT optional hydraulic chuck |
| 冷却泵 Cooing pump | 210W | Borestic | |
| 自动润滑系统 Automasic lubrication system | 齿轮泵 Gear pump | 国产 Domestic |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 TEM | 单位 UNIT | CK6150B-1000 | |||
| 工作范围 Scope of work | 床身上最大工件回转直径 Maximum workpiece rotation dameter of bed body | mm | Φ500 | ||
| 最大加工长度 Maxmum achining length | mm | 290 | |||
| X轴 The X axis | mm | 295 | |||
| z轴最大行程 Maximum Z-axs stroke | mm | 500,1000,1500,2000 | |||
| 床身 | 床身导轨宽度 Width of bed ral | mm | 405,托板贴塑，整体床脚 405, palet posting, integral bed foot | ||
| 最大顶尖距离 Maximum apex distance 主轴头型号 | mm | 500,1000,100,2000 | |||
| 主轴 principal axis | Spindie head type | A2-8 | |||
| 主轴内孔锥度 Taper of spinde inner hole | 公制90号(1:20) Metic No. 90 (1:20) | ||||
| 主轴孔径 Main shaft aperture 主轴转速 | mm | Φ82 | |||
| Spindle speed 主轴电机功率 | r/min | 三档变频，档内无极变速，45-260,140-800,280-1600 Thre speed vanable frequency. slepless speed change in gear, 45-260140-800280-1600 | |||
| Spindie motor power 手动三爪夹头尺寸 | KW | 普通电机7.5/可选配11 Ordnary motor 7.5/optional 11 手动三爪卡盘250 | |||
| 伺服轴 Servo shalt | Manual thre - jaw ollet dimensions X/Z向滚珠丝杆 | Manual three jaw chuck 250 2505/4010 | |||
| X/Z ball screw X轴/Z轴电机功率 | 6/10 | ||||
| 工作精度 Working accuracy | X /Z axds motor power | NM | 6;8 | ||
| 快速进给速度 Fast feed speed 定位精度 | m/min | X轴（横向）≤0.01 Z轴（纵向）≤0.015 | |||
| Postoning acuracy 重复定位精度 | mm | X axis (transverse) ≤ 0.01 Z axis (longitudinal) ≤ 0.015 X轴（横向）≤0.01 Z轴（纵向）≤0.01 | |||
| Repeated postioning accuracy | mm | X axis (ransverse) ≤ 0.01 Z axis (longitudinal) ≤ 0.01 | |||
| mm | ≤ 0.007 ≤0.03/长度300 | ||||
| 直径一致性 Consistency in diameter | mm | ≤ 0.03/Length 300 | |||
| 平面度 Flatness 表面粗糙度（钢件） | mm | ≤0.02/直径300 ≤ 0.02/Diameter 300 | |||
| 尾座 Taistock | Surface roughness (steel parts) | um | ≤Ra1.6 | ||
| 尾座套简直径 Diameter of talslock sleeve 尾座套简行程 | mm | Φ75 | |||
| Talstock sleeve stroke 尾座顶尖锥孔 | mm | 150 | |||
| Taper hole of taistock center 电源规格及容量（标准配置） | MT5# 三相380V/50HZ | ||||
| Powar specfication and capacity (standard configuration) 外形尺寸（一米机床） | Three phase 380V/50HZ | ||||
| Overall dimensions (one meter machine tool) 净重 Net weight | mm | 3000*1700*1800 2800 | |||
详细配置清单|DETAILED CONFIGURATION LIST
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系统 | 南京开通 Nanjing kaitong | 可选配广数，凯恩帝等系统 It can be equipped wth Guangshu, Kandi and other systems | |
| X轴电机 X-axs motor | 10NM | 南京开通 Nanjing kaitong | |
| Z轴电机 Z-axis moor | 15NM | 南京开通 Narjing kaitong | |
| 变频器 Frequency converter | 15KW | ||
| 电机 | 15KW | 国产 Domestic | |
| 四工位刀架 Four-position tool holder | 680刀架 680knife holder | 文昌 Wenchang | |
| 手动卡盘 Manual chuck | K11-500 | 科菲勒 Coleller | |
| 冷却泵 Coolng pump | 210W | ||
| 自动润滑系统 Automatic lubrication system | 齿轮泵 Gear pump | 国产 Domestic |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 TEM | 单位 UNIT | CK6170 | |||
| 工作范围 Scope of work | 床身上最大工件回转直径 Maximum workpiece rotation diameter of bed body | mm | 780 | ||
| 最大加工长度 Maximum machining length | mm | 950 | |||
| X轴 The X axis | mm | 560 | |||
| z轴最大行程 Maximum Z-axis stroke | mm | 950 | |||
| 床身 | 床身导轨宽度 Width of bed rail | mm | 490 | ||
| 最大顶尖距离 Maximum apex distance | mm | 950 | |||
| 主轴 principal axis | 主轴头型号 Spinde head type | C11 | |||
| 主轴内孔锥度 Taper of spindle inner hole | 公制90号(1:20) Metic No. 90 (1:20) | ||||
| 主轴孔径 Main shaft aperture | mm | 105 | |||
| 主轴转速 Spindie speed | r/min | 三档变频，档内无极变速，45-260,140-800,280-1600 Three speed varable frequency stepless speed change in gear 45-260140-800280-1600 | |||
| 主轴电机功率 Spindie motor power | KW | 15KW | |||
| 手动三爪夹头尺寸 Manual three - jaw collet dimensions | 手动三爪卡盘500 Manual three jaw chuck 500 | ||||
| 伺服轴 Servo shalt | X/Z向滚珠丝杆 X/Z bal srew | 2505/4010 | |||
| X轴/Z轴电机功率 X /Z axis moltor power | NM | 10/15 | |||
| 工作精度 Working accuracy | 快速进给速度 Fast feed speed | m/min | 6;8 | ||
| 定位精度 Positioning accuracy | mm | X轴（横向）≤0.01 Z轴（纵向）≤0.015 X axis (transverse) ≤ 0.01 Z axis (longitudinal)≤ 0.015 | |||
| 重复定位精度 Repeated positioning accuracy | mm | X轴（横向）≤0.01 Z轴（纵向）≤0.01 X axis (transversejs 0.01 Z as (longtudinai)s 0.01 | |||
| 圆度 Roundness | mm | ≤0.007 | |||
| 直径一致性 Consistency in diameter | mm | ≤0.03/长度300 ≤ 0.03/Length 300 | |||
| 平面度 Flatness | mm | ≤0.02/直径300 ≤ 0.02Diameler 300 | |||
| 表面粗糙度（钢件） Surface roughness (steel parts) | um | ≤Ra1.6 | |||
| 电源规格及容量（标准配置） Power specification and capacity (standard configuration) | 三相 380V/50HZ Three phase 380V/50HZ | ||||
| 般规 General rule | 外形尺寸（一米机床） Overall dimensions (one meter machine todl) | mm | 3000*1700*1800 | ||
| 净重 Net weight | KG | 2800 | |||
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系统 | 南京开通 Nanjing kaitong | 可选配广数，凯恩帝等系统 It can be equipped with Guangshu, Kandi and other systems | |
| X轴电机 X-ais motor | 10NM | 南京开通 Narjing kaitong | |
| Z轴电机 Zais moor | 15NM | 南京开通 Norjing kaitong | |
| 变频器 Frequency converter | 15KW | 国产 | |
| 主电机 | 15KW | ||
| 四工位刀架 Four-position tool holder | 680刀架 680knife holder | ||
| 手动卡盘 Manual chuck | K11-400 | 科菲勒 Coleller | |
| 冷却泵 Cooing pump | 210W | oretic | |
| 自动润滑系统 Automatic lubrication system | 齿轮泵 Gear pump | 国产 Domestic |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 TEM | 单位 UNIT | CK6180 | |||
| 工作范围 | 床身最大的回转直径 Maxmum tuming diameter of the bed | mm | Φ800 | ||
| 通过滑板最大回转直径 Maximum tuming diameter through siding plate | mm | Φ480 | |||
| X轴（横向）最大行程 Maximum travel of X-axis (ransverse) | mm | 470 | |||
| Z轴（纵向）最大行程 Maximum travel of Z-axis (longtudinal) | mm | 870,1620,2120,3120 | |||
| 床身 | 床身导轨宽度 Width of bed guide rail | mm | 600,床身床脚/整体铸造 4600. bed foointegral casting | ||
| 最大顶尖度 Maximum centricily | mm | 750,1500,2000,3000 | |||
| 主轴 principal axis | 主轴头型号 Main shaft head model | C-11 | |||
| 主轴内孔锥度 Spindie inner hole taper | 公制(1:20) Metic (1:20) | ||||
| 主轴孔径 Spindle bore | mm | Φ104 | |||
| 主轴变速级教手动3级 teaching manual level 3 Spindle speed change level | r/min | 40-125;110-350;290-950 | |||
| 主轴电机功率 Spindie motor power | KW | 15 | |||
| 手动夹头尺寸 Manual collet size | mm | Φ400 | |||
| 伺服轴 Servo shalt | X轴丝杆 X-axis screw rod | 3210 | |||
| Z轴丝杆 Z-axs screw rod | 6310 | ||||
| 工作精度 Working accuracy | X/Z轴快速进给速度 Rapid feed speed of X/Z axis | m/min | 8;4 | ||
| 定位精度 positioning accuracy | mm | X轴（横向）≤0.002Z轴（纵向）≤0.025 X-ais (transverse) ≤ 0.002 Z-axis (iongitudinal) ≤ 0.025 | |||
| 重复定位精度 Repetiive positioning accuracy | mm | X-axis (traneverse) ≤ 0.015 Z-axs (iongiludinal) s 0.010 | X轴（横向）≤0.015 Z轴（纵向）≤0.010 | ||
| mm | ≤ 0.01 | ||||
| 直径一致性 Diameter unifomity | mm | ≤0.03/长度300 ≤ 0.03/length 300 | |||
| 平面度 Flatness | mm | ≤0.02/直径300 ≤ 0.02/dameler 300 | |||
| 表面粗糙度（钢件） Surface roughness (steel parts) | um | ≤Ra3.2um | |||
| 尾座 Taistock | 尾座套简直径 Diameter of taislock sleeve | mm | Φ120 | ||
| 尾座套简行程 Talstock sleeve stroke | mm | 250 | |||
| 尾座顶尖锥孔 Talstock oenter taper hole | MT6# | ||||
| ral le | 电源规格（标准配置) Power specification (standard configuration) 外形尺寸 | 三相380V/50HZ Three-phase 380V/50HZ | |||
| Overall dimension 净重 | mm | 3900×2600×2600 | 4400×2600×2600 | 5400×2600×2600 | |
| Net weight | KG | 4600kg 5600kg 6600kg 7850kg | |||
机床标准配置及主要外购件 | MACHINE TOOL STANDARD CONFIGURATION AND MAIN PURCHASED PARTS
| 序号 NO. | 配套件名称 NAME OF ACCESSORIES | 制造商 MANUFACTURER | 规格型号 SPECIFICATION | 数量 QUANTITY |
| 1 | 数控系统 CNC system | 南京开通 Nanjing kaltong | 828 | 1套 1 set |
| 2 | 变频器 Frequency corverter | 国产 Domestic | 22KW | 1套 19el |
| 3 | X轴伺服电机 X-axs servo molor | 南京开通 Narjing kaltong | 15nm | 1套 1 set |
| 4 | Z轴伺服电机 Z-axis servo motor | 南京开通 Narjing kaitong | 27nm | 1套 1 set |
| 5 | X轴丝杠 X-axis lead screw | 中国汉江 Hanjang nrver, china | FFZD4006R-5/P3 | 1套 1 set |
| 6 | Z轴丝杠 Z-axis lead screw | 中国汉江 Hanjiang fiver, china | FFZD6310R-5/P3 | 1套 1 5e |
| 7 | 主轴轴承 Spindle bearing | NN3032K/P4 | 1套 1 set | |
| 哈轴 Ha 20is | 234432/P4 | 1套 1 set 1套 |
| 序号 NO | 配套件名称 NAME OF ACCESSORIES | 制造商 MANUFACTURER | 规格型号 SPECIFICATION | 数量 QUANTITY |
| 8 | 手动台尾 Manual abutment tal | 国产 Domestic | 标配 Standard configuration | 1套 1 9et |
| 9 | 立式四工位刀架 Vertical four station tool rest | 宏达/文昌 Hongdawenchang | 280*280 280°280 | 1套 1 set |
| 10 | 手动卡盘 Manual chuck | 国产 Domestic | Φ800单动四爪 800 single action four claww | 1套 1 set |
| 11 | 冷却泵 Cooling pump | 国产 Domestic | 120w 120w | 1套 1 set |
| 12 | 自动润滑系统 Automatic lubrication system | 台湾 Tawan | 电动润滑泵 Eledtric lubricating pump | 1套 1 set |
| 13 | 主轴皮带 Spindle belt | 国产 Domestic | XPZ XPZ | 5根 5 root |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 | 单位 UNIT | CK61125 | ||||||
| 床身上最大回转直径 | Swing over bed | mm | Φ1350 | |||||
| 最大切削长度 | Maximum utting length | mm | 1500、2000、3000、4000、5000 | |||||
| 最大切削直径 | Maximum cutting diameter | mm | Φ1250 | |||||
| 滑板上最大回转直径 | Maximum tuming diameter on sliding plate | mm | Φ900 | |||||
| 主轴端部型式及代号 | Type and code of spindle end | A2-11 | ||||||
| 主轴孔直径 | Diameter of spindle hole | mm | Φ105 | |||||
| 主轴转速范围 | Spindle speed range | r/min | 17~1000（手动） 17-1000 (manu | |||||
| 主轴转速级数 | Spindie speed stage | 手动四挡内无级变速 Manual fouth gear, slepless speed change in gear | ||||||
| 主电机功率 | Main motor power | kW | 15（可选配22主电机） 15 (22 main molors are optional) | |||||
| X轴快移速度 Z轴快移速度 | X-axis rapid traverse speed | m/min | ||||||
| X轴行程 | Z-axis rapid traverse speed | m/min | 10 | |||||
| Z轴行程 | X-axis stroke | mm | 675 | |||||
| 尾座套简直径 | Z-axis stroke | mm | 850~5850 | |||||
| 尾座套筒行程 | Diameter of tailstock sleeve | mm | 140 | |||||
| 尾座主轴锥孔锥度 | Talstock sleeve stroke | mm | 250 | |||||
| Taper of talstock spindle taper | 莫氏 | 6# 755 | ||||||
| 中心高 Center height | Distance from bed | mm | 1500 | |||||
| From the ground | mm | 6. 3T/6.8T/7.3/8.1T/8.6T | ||||||
| 机床重量 | Machine weight | kg | 700（宽体加重型） | |||||
| 导轨宽度 | Width of guide rail | mm | 700 (heavy body) | |||||
| 机床外型（长×宽×高） | Machine tool profle (long × wide × High) | mm | 3700-7300×2550×2180 | |||||
| 最大承重 | KG | 2000 | ||||||
机床随机附件 | ATTACHED ACCESSORIES OF MACHINE TOOL
| 序号 NO. | 名称 NAME | 制造商 MANUFACTURER | 规格型号 SPECIFICATION | 数量 QUANTITY | |
| 1 | 地脚螺钉及垫圈/螺母 Foundation screws and washers/nuts | / | 1 | ||
| 2 | 顶尖 Top | 国产 dome | M5 S25-2 | 1 | |
| 3 | 顶尖套 Top sleeve | 国产 domestic | 120/5 16C02090 | 1 |
详细配置清单|DETAILED CONFIGURATION LIST
| 配套件名称 NAME OF ACCESSORIES | 规格型号 SPECIFICATION | 品牌来源 BRAND SOURCE | 备注 NOTES |
| 数控系统 CNC system | 南京开通 Nanjing Open | 可选配广数/KND等系统 Optional wide number/kND and other systems | |
| X轴电机 X-axs motor | 10NM | aning Oen 南京开通 | |
| Z-axis molor Z轴电机 | 15NM | Naning Open 南京开通 | |
| 变频器 inverler | 22KW | 国产 Domestic | |
| 电机 | 22KW | ||
| 四工位刀架 Four station tool hoider | 300刀架 300 knife holder | 宏达 Hongda | |
| 手动卡盘 Manual chuck | 单动1.2米四爪 Single action 1.2 meter four dlaw | 国产 Domestic | |
| 冷却泵 Cooing pump 自动润滑系统 | 国restic 国产 |
机床主要参数 | MAIN PARAMETERS OF MACHINE TOOL
| 项目 | CK61145-1000 | |||||||
| 床身上最大回转直径 | Swing over bed | 1450mm | ||||||
| 伺服电机 | servo motor | 10nm,15nm | ||||||
| 刀架上最大回转直径 | Maximum rotation diametier on the tool holder | 1080mm | ||||||
| X中拖板宽度 | X middle drag board width | 420mm | ||||||
| 床身上部导轨宽度 | Width of the upper guide mail af the bed | 720mm | ||||||
| 主轴端部 | Spindle end | ISO(GB)A2-11 | ||||||
| 主轴通孔直径 | Main spindle through-hole diameter | 130mm | ||||||
| 主轴转速 | Spindle speed | 30-84/53-150/125-350/300-835 | ||||||
| 主轴 | principal axis | 手动换挡四档 | Manul Shilt to Fourth Gear | |||||
| 拖板Z向最小移动单位 | The minimum movement unit of the drag plate in the Z direction | 0.001mm/min | ||||||
| 拖板X向最小移动单位 | The minimum movement unt in the X-direction of the drag board | 0.0005mm/min | ||||||
| 拖板Z向行程 | Z-direction travel of the drag plate | 1000mm | ||||||
| 拖板X向行程 | Trailer X-direction travel | 650mm | ||||||
| X相定位精度 | X-phase positoning accuracy | 0.015mm | ||||||
| Z相定位精度 | Z-phase positioning accuracy | 0.02mm | ||||||
| X相重复定位精度 | X-phase repeated positioning accuracy | 0.01mm | ||||||
| Z相重复定位精度 | Repetitive positioning accuracy | 0.01mm | ||||||
| 最大加工长度 | Maximum processing length | 1000mm | ||||||
| 拖板X/Z向快速移动速度 | Rapid movement speed of drag board in XIZ diredtion | 6000mm/min | ||||||
| 尾座套简直径 | Tal socket dameter | 130mm | ||||||
| 尾座套筒锥孔 | Talstock sleeve tapered hole | 莫氏6号 | ||||||
| 尾座套简最大行程 | Maximum stroke of tilstock sleeve | Mohs 6 250mm | ||||||
| 主电机功率 | Main motor power | 22kw | ||||||
| 电动刀架重复定位精度 | Electrc tool holder mepetiliv positoning accurmacy | 0.002mm | ||||||
| 整机重量 | 25 Whole machine weight | 6T | ||||||
| 外观尺寸(mm) | 26 Extemal dimensions (mm) | 高2350*宽2350*长3500 Height 2350 " Width 2350 * Length 3500 | ||||||
