该页无缩略图
PRODUCTINTRODUCTION
The PVC-U drainage pipes feature a belled end and can be connected using an adhesive bond. The product provides outstanding corrosion resistance and offers a lifespan far superior to cast iron pipes. With their light weight, they are easy to transport, install, and connect, making them widely used in drainage and sewage systems for civil buildings, as well as in rainwater drainage.
PRODUCTFEATURES
⊚ The pipe surface offers outstanding hardness and tensile strength, and a high pipe safety factor.
⊚ Good aging resistance; service life of more than 50 years.
The pipe's friction resistance coefficient is very low, allowing water to flow smoothly; it does not block easily, requiring less maintenance.
⊚ The material has a high oxygen index and self-extinguishing performance.
The pipe has a small linear expansion coefficient with litle deformation under the influence of temperature.
The pipes and pipe fittings can be connected by cementing, for easy construction and operation, with outstanding installation efficiency.
PERFORMANCEINDICATORS
The performance indicators of the drainage pipes are as follows:
PIPEPERFORMANCEREQUIREMENTS
| NO. | Characteristic | PerformanceRequirement |
| Longitudinalreversion/% | ≤5 | |
| 2 | Fallingweightimpact testTIR/% | ≤10 |
| 3 | Acetoneresistance | Nosignofdelamination ordisintegration |
| 4 | Vicatsoftening temperature/C | ≥79 |
| 5 | Tensileyieldstress/MPa | ≥40 |
THEPERFORMANCEINDICATORSOFDRAINAGEFITTINGS AREASFOLLOWS
| NO. | Characteristic | Technicalrequirement |
| Jointtest | 23℃,170kpa,24h,noleakage | |
| 2 | Acetoneresistance | Nocorrosionafter soakingfor20minutes |
EXECUTIONSTANDARDS
The execution standard for the drainage pipes is: PNS1950: 2010.
The execution standard for the drainage fittings is: ASTM D2729, where the impact performance items and their pass rates are for reference only.
PIPESERIES
| Product Name | Specification (mm) | Inch | Wallthickness (mm) | Remarks |
| uPVCSanitary | 57 | 2" | 2.5 | S1000series |
| 57 | 2" | 1.9 | S600series | |
| 82 | 3" | 3.7 | S1000series | |
| 82 | 3" | 2.5 | S600series | |
| 107 | 4" | 3.8 | S1000series | |
| 107 | 4" | 2.5 | S600series | |
| 160 | 6" | 3.2 | ||
| pipe (Hub) | 200 | 8" | 3.9 | |
| 250 | 10" | 4.9 | ||
| 315 | 12" | 6.2 | ||
| 400 | 16" | 9.8 | ||
FITTING SERIES
| Specification(mm) | Inch |
| 57 | 2" |
| 82 | 3" |
| 107 | 4" |
| 160 | 6" |
Elbow45
| Specification(mm) | Inch | |
| 57 | 2" | |
| 82 | 3" | |
| 107 | 4" | |
| 160 | 6" |
Elbow90°
| Specification(mm) | Inch |
| 57 | 2" |
| 82 | 3" |
| 107 | 4" |
| 160 | 6" |
| Tee | |
| Specification(mm) Inch | |
| 57 2" | |
| 82 3" | |
| 107 4" | |
| 160 | 6" |
Wye45°
P-Trap w/O-ring
| Specification(mm) | Inch |
| 57 | 2" |
| 82 | 3" |
| 107 | 4" |
| 160 | 6" |
| Specification(mm) | |
| 57 | Inch 2" |
| 82 | 3" |
| 107 | 4" |
| 160 | 6" |
sanitary Clean Out
Wye Reducer 45
| Specification(mm) | Inch |
| 57 | 2" |
| 82 | 3" |
| 107 | 4" |
| 160 | 6" |
| Specification(mm) Inch | |
| 82×57 | 3"×2" |
| 107×57 | 4"×2" |
| 107×82 | 4"×3" |
| 160×107 | 6"×4" |
TeeReducer
| Specification（mm) | Inch |
| 82x57 | 3"×2" |
| 107×57 | 4"×2" |
| 107×82 | 4"×3" |
| 160x107 | 6"×4" |
目l LESSO Philippines Trading Inc.
https://en.lesso.com 5thflrATCCorporateCenter,Madrigal BusinessPark,AyalaAlabang,Muntinlupa
