手持式激光测距仪Laser Distance Meter用户手册User Manual

H-D510GL H-D710GL H-D100GL H-D120GL

目录

中文… . 01\~21
English... ..22\~44

A CE >1/4 PA 2 2024L136-44

产品执行标准：GB/T14267-2009

安全条例

初次使用仪器前 初八仪用刚，儿门汕丽工尔歌木用 请先仔细阅读安全条款和操作指南

在使用仪器之前请仔细阅读本手册中的所有操作指南和安全条例，没有按照本手册所指引的操作方法使用仪器有可能会造成仪器的损害、影响测量精度、对使用者或第三者的人身伤害。
不要用任何方式自行打开或修理仪器，严禁非法改装或改变仪器激光发射器的性能。请妥善保管仪器，不要放置在儿童可以接触到的地方，避免无关人员的使用。
严禁用仪器激光器照射自已或他人的眼睛及身体其他部位严禁将激光器照射在高反光的物体表面上。
仪器电磁辐射可能对其他设备和装置造成干扰，请不要在飞机或医疗设备附近使用本仪器，不要在易燃、易爆的环境中使用仪器。
仪器更换的废旧电池和报废的仪器不可与生活垃圾一同处理，请按国家或者当地的相关法律规定处理废旧电池和报废仪器。
个仪器出现任何的质量问题，或对使用仪器有任何疑问时请及时联系当地经销商或深达威仪器厂家，我们将第一时间为您解决。

SNDWAY感谢您购买 深达威?仪器 手持式激光测距仪系列产品！

专业铸造品质 品质成就品牌

显示屏

图1主界面

图2菜单界面

图3模式选择界面

按键

锂电电池

●内置3.7V600mAh锂电池供电，不可拆装。仪器自带充电电路，具有明晰的欠压指示、充电指示。
·电池充电：请使用具有安全认证的DC5V>1A充电器，建议用手机充电器充电。
）电池用过一段时间后容量不足时，开不了机或开机后，电池符号空白闪烁显示，需要及时充电。插入USB充电，电池符号条形柱滚动显示，充满电后会显示，且闪烁。

电池保养

长时间不使用时，先把产品充满电，并每半年再充电一次，以免电池放电损坏。

启动仪器、功能设置

启动仪器和关闭仪器

关机状态下，短按 米 键，仪器进入待测模式。开机状态下，长按 CLEFR 键关闭仪器，或者在120秒内未对仪器进行任何操作仪器将自动关闭。（120秒是默认值，用户可以根据需要自己设定，参考菜单设置)。

单次测量

操作步骤如下:

1.待测模式下，短按 米 键，仪器激光发射。

2.锁定测量目标，短按 米 键，仪器测得一次距离，并显示在屏幕的主显示区。在辅助显示区，会显示最近三次测得的历史数据，可短按 CLEFR 键清除。

连续测量

此模式方便用户找到某一距离点，而勿需频繁的按键，即可得到需要的数据。操作步骤如下：

1.待测模式下，长按键，仪器进入连续测量模式，屏幕会显示最大值MAX和最小值MIN以及最大最小差值，主显示区会显示当前测量值。
2.短按任意键，退出连续测量。

测量停止后，测量结果自动保存到存储介质中，以方便随时查阅。

模式选择

短按 FUN键，进入模式选择界面。操作如下:短按 +△FUN SET 键切换模式;
短按 米 键进入选择的模式;
短按 CLEAR 键返回测量界面。

虚拟刻度尺

选择模式，按【键，进入虚拟刻度尺测量模式。屏幕显示虚拟刻度尺后，将仪器对准待测物体，按「键，仪器进入连续测量模式，此时屏幕上会实时显示当前测量点的长度。

短按 米 键，测量完成，最终测量结果将显示在虚拟刻度尺上。若测量过程中发生仪器位移，可短按 键重新开始测量。

面积测量

选择 S 模式，屏幕显示 ，根据提示完成下列操作。

按「键，测得长方形的长;
按键，测得长方形的宽;
测量完成后，仪器自动计算出面积和周长。如果用户认为本次测量数据可能有误，还可短按 c距键，返回上一次的测量，进行重新测量。

体积测量

选择 模式，屏幕显示 ，根据提示完成下列操作。

按按 按米 键进行第一条边的测量 (长)
按 键进行第二条边的测量 (宽)
按 米 键进行第三条边的测量 (高)
仪器会自动进行体积运算，结果显示在主显示区。辅助显示区显示立方体的长宽高的测量值。

在测量过程中，还可以短按 CLFR 键清除本次测量结果重新测量。按cER 键多次，退出体积测量状态，进入长度测量模式。

墙面面积测量

选择模式，屏幕显示 『，根据提示完成下列操作。

按 键，测得墙面的高度；
按 键，测得墙面1的宽度1;
仪器会自动计算墙面的面积 \c= 高度x宽度1；
按键，测得墙面2的宽度2;仪器会自动计算墙面的面积总和；
面积总和 \c= 高度 \mathsf{x} （宽度 \L_{1+} 宽度2);
依次类推，按键，测得墙面n的宽度n;
面积总和 \c= 高度 \mathsf{x} （宽度 \L_{1+} 宽度 2\substack{+\ldots+} 宽度n);

在测量过程中，还可以短按 CLEAR 键清除本次测量结果重新测量。按 c距：键多次，退出墙面面积测量状态，进入长度测量模式。

仪器预设有四种利用勾股定理测量三角形单边距离模式方便用户在特定复杂环境下进行间接测量。

）测角测高

选择人模式，屏幕显示 ，根据提示完成下列操作。

按键依屏幕提示先测出虚线直角边斜边的长度(a)同时测出斜边与底边夹角θ。
仪器自动计算水平距离b与垂直高度h。

②测量三角形两直角边，间接测量斜边长度选择模式，屏幕显示 ”，根据提示完成下列操作。按 米 键依屏幕提示测出一条虚线直角边的长度(a)按 键测出另一条虚线直角边的长度(b)仪器自动计算实线斜边的长度 (x)

\bullet 测量三角形三条虚线边，间接测量三角形一条边的长度选择模式，屏幕显示，根据提示完成下列操作，按 键依屏幕提示先测出一条虚线斜边的长度(a)按 米 键测出中间一条虚线斜边的长度(b)按 米 键测出另一条虚线底边的长度(c)仪器自动计算出实线三角形一条边的长度 (x)

4测量三角形三条虚线边，间接测量直角边长度选择模式，屏幕显示 ，根据提示完成下列操作。按 按按按 键依屏幕提示测出一条虚线斜边的长度(a)按 键测出如图虚线边的长度(b)按 键测出如图另一条虚线斜边的长度 (\mathsf{c}) 仪器自动计算出实线直角边的长度 (x)

勾股测量模式下，直角边必须小于斜边长度仪器才能计算否则仪器会显示错误信号提示。在勾股测量模式下，为保证测量的精度，须确保从同一个起始点测量，并按斜边、直角边测量顺序测量。

投线模式

选择模式或者短按键，进入投线模式，仪器开启十字激光，屏幕显示度数。投线模式角度测量方向参考【角度测量】章节。

投线报警功能

进入投线模式，如右图所示:

选择 X 关闭报警功能,选择 < 开启报警功能。

当角度超过 ±4° 时，激光快速闪烁。
在测量过程中，短按 CLEAR 退出投线状态，进入长度测量模式。

加减测量功能

单段距离测量可通过加/减运算进行累加或累减操作。用户在测量单段距离得到一次测量结果后，再通过【+或键进入累加累减功能选择，短按【+键，当屏幕出现^{66}+^{39} ，进入累加测量模式，屏幕显示上次测量值与当次测量值的累加值。

短按 ！ 键，当屏幕出现“-”，进入累减测量模式，屏幕 显示上次测量值与当次测量值的差值。

不仅距离可累加累减，面积和体积也可进行累加累减。下面举例说明面积的累加累减功能，体积的累加累减与此类似。

面积累加:

1.测量第一个面积，得到结果如下图1所示。2.短按【+键，进入累加模式，再测量第二个面积，得到结果如下图2。3.短按 米 键，得到两次面积求和的结果，结果如图3所示

图1

图2

图3

多次面积累加:

在面积累加第2步操作之后，按+键，继续测量，可再次累加下一个面积，重复该步骤，可进行多次累加，最后执行第3步求和。

面积累减：

短按键，可切换累减模式。累减及多次累减操作和累加类似，请参考累加操作。

测量记录存储功能

仪器测量完毕后，测量结果自动保存到存储介质中，最大存储笔数100笔，记录查看请参考菜单设置。

自动转屏与锁定

(横向显示)

(纵向显示)

·自动转屏：仪器可自动根据当前方向，旋转显示内容，支持360°旋转，4个方向显示。

菜单设置

菜单操作

短按 SET 键，进入菜单选择;
短按 + ！ 键，选择选项;
短按 COFFR 键，返回测量界面;
CLEAR 短按 FUN SET 键，选择不同设置参数;
短按 不 键，确认当前参数。

\bullet 菜单选项

10.自助校准

自助校准功能主要用于修正数据，当用户测量距离发生偏差时，可用该功能修正距离，修正范围： -0.009~0.009m 。

比如用户认为偏大2mm，可将此值调整为-0.002m，即可补偿2mm；反之偏小2mm，则调整为 0.002\mathsf{m} 。

操作如下:

按照菜单操作，进入自助校准后，通过短按 FUN SET 键修改自助校准数值。

11.查看记录

操作如下:

1)短按 FUN SET 键，前后翻页;
2)短按 米 键，进入选择记录模式;
3)短按 FUN SET 键，选择记录;
4)短按 米 键，查看记录详细;
5)短按 CLEAR 键，返回选择记录模式;
6)长按 CLEFR 键，进入删除状态;

删除状态显示如下：

操作如下:

短按+键，选择操作;
短按 米 键，执行操作;
短按 OFF 键，返回记录浏览模式。CLEAR

12.恢复出厂设置

操作如下:

，则仪器会恢

短按 FUN SET 键，选择操作;短按 米 键，执行操作，如果选择复出厂设置，选择 X 则返回;短按 OFF 键，返回测量界面。CLEAR

13.字体大小设置

操作如下:

短按 FUN SET 键，选择操作; 短按 米 键，执行操作,
选择on是大字体，
选择of是小字体;
短按 OFF 键，返回测量界面。 CLEAR

角度测量

角度的测量范围是 -90°~90°.

X轴角度参考示意图

Y轴角度参考示意图

注：投线模式角度方向为X轴(左右)方向，其它模式角度方向为Y轴(前后)方向。

中英文语音切换

在仪器关机状态下，按住FUN和 sET→键，再短按 米 键开机。开机后，屏幕会显示开机LOGO，等待2秒后，再松开 FUN和SET 键，此时，仪器完成中英文语音切换。

错误信息

在仪器出现Err×信息时，表示仪器可能无法进行正确测量下面提出了可能会遇到的错误提示及解决办法。

技术参数

测距参数

投线参数

机械卷尺参数

其它参数

\*“d"表示实际距离

① 在恶劣的环境下，如阳光过于强烈、环境温度波动过大、反射面反射效果较弱、电池电量不足等情况，测量结果会有较大的误差，此种情况配合目标反射板测量效果更佳。② 电池工作时间/次数，以实验室环境测试结果为准。

仪器日常保养

·禁止将仪器长期放置在高温高湿的环境中储存，长期不使用仪器时，请把仪器放置在随机的仪器套内放在阴凉干爽处存放。
·请保持仪器表面清洁，可用湿的软布擦拭表面灰尘，不可用带有腐蚀性洗液清洁仪器。可按照擦拭光学器件表面的方法擦拭激光器窗口和聚焦镜。

装箱清单

购买仪器时请按下列清单认真检查仪器所有附件是否完整。

△ CE 2

Safety Regulations Please read the safety regulations and operation guide carefully before operating.

Please read all of the operational guide and safety regulations in this manual before operation. Improper operations without complying with this manual may cause damage to the device, influence on measurement result or cause personal injury to the user or a third party.
The instrument is not allowed to disassemble or repair in any ways. It is forbidden to do any illegal modification or performance change for laser emitter. Please keep it out of reach of children and avoid being used by any irrelevant person.
It is strictly prohibited to shoot eyes or other parts of body with the laser. It is not allowed to take the laser to shoot the surface of any highly reflective objects.
Due to electromagnetic radiation interference to other equipment and devices, please don't use the meter in the plane or around medical equipment, don't use it in inflammable or explosive environment.
Discarded meter device should not be processed just like household garbage, please handle it in line with related law and regulations.
If there are any quality problems with the instrument or any questions about the use of the instrument, please contact local distributors or manufacturer in time, we are ready to offer solutions for you.

PIC3 Mode selection interface

Lithium Battery

● The built-in 3.7V 600mAh lithium battery is nonremovable. The instrument has its own charging circuit, with clear undervoltage indication and charging indication.
· Battery charging: Please use a DC5V>1A charger with safety certification. A mobile phone charger is recommended.
· The instrument shall be charged in time when running out of battery or its battery symbol shows blank and flashes due to insufficient battery capacity. Insert USB to charge, and the battery symbol scrolls to display . When fully charged, will display and flash.

Battery Maintenance

Keep the product with full charge if no operations for a long time, and charge it once every half a year to avoid battery damage from discharge.

Start the Instrument/Menu Setting

Turn On/Off the Instrument

Under Off state, short press ? , the device enters the test mode.

Under On state, long press CLEAR to turn the device off. The device will automatically shut down without any operation within 120 seconds. (120 seconds is the default value, users can to set it referring to the Menu Settings).

Single Distance Measurement

The steps are as follows:

1. In the measurement mode, press 米 and the instrument laser will be emitted. 2. Lock the measurement target, press \* , the instrument measures the distance once, and it is displayed in the main display area. In the auxiliary display area, the historical data of the last three measurements will be displayed, which can be cleared by pressing .

Continuous Measurement

This mode is convenient for users to find a certain distance point. Without frequent pressing, you can get the required data. The steps are as follows:

1. In the measurement mode, long press 米 ,the instrument will enter the continuous measurement mode, the screen will display the maximum value MAX, minimum value MIN and the maximum and minimum difference, and the main display area will display the current measurement value.
2. Short press any button to exit continuous measurement mode.

After the measurement stops, the measurement results are automatically saved to the storage media for easy access at any time.

Mode Selection

Press ruw to enter the mode selection page. The operation is as follows:

Press +-△FUN SET to switch modes; Press 米 to enter the selected mode; Press OFF to return to the measurement interface. CLEAR

Digital Tape Measure

Select / mode, press 米 to operate Digital Tape Measure mode. Once the digital tape is displayed on the screen, aim at the object and press again to enter continuous measurement mode, displaying the real-time length. Press ? to finalize the measurement and view the final measured result. If the instrument shifts during measurement process, briefly press 米 to restart.

Area Measurement

Select mode, the screen displays ， follow the prompts to complete the following:

Press 米 to measure the length of the rectangle;
Press W to measure the width of the rectangle;
MEAS
After the measurement is completed, the instrument automatically calculates the area and perimeter of the rectangle. If the user thinks that the measurement data may be wrong, he can also short press CLFR to return to the last measurement and re-measure.

Volume Measurement

Select mode, the screen displays ， follow the prompts to complete the following:

Press 米 to measure the first side (length);
Press to measure the second side (width);
Press to measure the third side (height);
The instrument automatically performs volume calculations and the results are displayed in the main display area. The auxiliary display area displays measurements of the length, width and height of the cube.

In the measurement process, user can also press cEa to clear the measurement result and measure again. Press CER again to exit the volume measurement state and enter the length measurement mode.

Wall Area Measurement

Select mode, the screen displays , follow the prompts to complete the following:

Press 米 to measure the height of the wall first; Press 米 to measure the width 1 of the wall 1, and the instrument automatically calculates the area of the wall \mathbf{\tau}=\mathbf{\tau} height x width 1; Press 米 to measure the width 2 of wall 2, and the instrument calculates the total area of the walls automatically; Sum of areas \mathbf{\tau}=\mathbf{\tau} height \mathsf{x} (width \L_{1+} width 2); By analogy, press Ito measure the width n of the wall n; Sum of areas \mathbf{\tau}=\mathbf{\tau} Height x (width \L_{1+} width ^{2+} ..... ^+ width n);

During the measurement process, user can short press a to clear the measurement result and measure again. Press again to exit the wall area measurement state and enter the length measurement mode.

There are four modes of measuring the triangular unilateral distance by means of Pythagorean theorem, which are convenient for users to measure indirectly in specific complex environments.

① Angle and Height Measurement

Select K. mode, the screen displays ， follow the prompts to complete the following:

Press 米 according to the screen prompt first measure the length of the hypotenuse of the right Angle of the dotted line (a) and measure the Angle between the hypotenuse and the bottom edge.

The device automatically calculates the horizontal distance (b) and vertical height (h) .

@ Calculate the hypotenuse by measuring the length of two sides.

Select mode, the screen displays , follow the prompts to complete the following:

Press to measure the length of the right Angle of a dotted line according to the screen prompt (a)

Press 米 to measure the length of the right side of the other dotted line (b)

The device automatically calculates the length of hypotenuse (x)

① Measure the three dotted edges of the triangle, and indirectly measure the length of one side of the triangle

Select mode, the screen displays ， follow the prompts to complete the following:

Press 米 to measure the length of the hypotenuse of a dotted line (a).

Press 米 to measure the length of the hypotenuse of a dotted line in the middle (b).

Press 米 to measure the length of the bottom of the other dotted line (c).

The device automatically calculates the length of one side of the solid triangle (x).

④ Measure the three dotted edges of the triangle, and indirectly measure the length of one side of the triangle

Select mode, the screen displays ，follow the prompts to complete the following:

Press 米 to measure the length of the hypotenuse of a dotted line (a).

Press 米 to measure the length of the dotted line as shown (b).

Press 米 to measure the length of the hypotenuse of the other dotted line in the picture (c).

The device automatically calculates the length of the right Angle side of the solid line (x)

In the Pythagorean Measurement Mode, the right Angle side must be less than the hypotenuse length of the instrument to calculate, otherwise the instrument will display an error signal prompt. In the Pythagorean Measurement Mode, to ensure the accuracy of the measurement, it is necessary to ensure that the measurement is taken from the same starting point and in the order of the hypotenuse and right Angle side measurements.

Laser Level Mode

Select Φ mode or short press Φ to enter the laser level mode, and the device turns on the cross laser line, the screen displays angle. The angle measurement direction of the laser level mode is referred to the section "Angle Measurement".

Laser Level Alarm

In projection mode (the screen displays as shown on the right)

Select Select

to disable alarm.
to enable alarm.

When the angle exceeds ±4°{}_{i} the laser will flash rapidly.

During measurement, a short press of CLEAR will exit projection mode and enter length measurement mode.

Addition / Subtraction Measurement

Single distance measurement can be added or subtracted by adding/subtracting operations.

After measuring a single distance, the user can press +-to enter the cumulative addition/subtraction. Press +, when "+" appears on the screen, the user enters the cumulative addition measurement mode and the screen displays the summation value of the last measurement value and the current measurement value.

Press , When "-" appears on the screen, the system enters the cumulative subtraction measurement mode. The screen displays the difference between the last measurement and the current measurement.

Not only distance can be calculated in addition and subtraction, but area and volume can do the calculation as well. Take area as sample:

Area cumulative function:

1. Measure the first area as shown in PlC1.
2. Short press + , and enter the cumulative addition mode, then measure the second area as shown in Plc2,
3. Short press 不 to get the summation result of these two areas which is showing in PlC3.

Multiple Area Addition:

After the area accumulation step 2 operation, press to continue the measurement, you can add the next area again, repeat this step, you can do multiple accumulations, and finally perform the sum step 3.

Multiple Area Subtraction:

Press to switch the subtraction mode. The cumulative subtraction and multiple cumulative subtraction operations are similar to cumulative addition operations. For details, see Cumulative Operations.

Record Function

After completing the measurement, the measurement results are automatically saved to the storage media. The maximum memory is 100 units, please refer to Menu Settings to view records.

Automatic Screen Rotation and Locking

(Horizontal display)

(Vertical display)

· Automatic screen rotation: The instrument can automatically rotate the screen content according to the current direction. It supports 360° rotation and displays in 4 directions.

Menu Settings

Menu operation

Short press SET to enter the menu;
Short press <+ to select options;
Short press COER to return to measurement interface;
Short press FUN SET to select different setting parameters;
Press 米 to confirm the current parameter.

Menu option

10. Self-calibration

The self-calibration function is mainly used to correct data. When the deviation occurs when the user measures the distance, the function can be used to correct the distance, the correction range: -0.009\~0.009m.

For example, if the user thinks that the value is larger by 2mm, the value can be adjusted to -0.002m to compensate 2mm; On the contrary, if it is 2mm smaller, it is adjusted to 0.002m.

The operation is as follows:
Enter the self-calibration, short press FUN seTV to modify the self-calibration value.

11. Viewing records

The operation is as follows:

Delete state is as follows:

1) Select

Delete all records

2) Select

: Back to view records

The operation is as follows:

Short press <+-> to select the operation; Short press 米 to perform the operation; Short press OFF to return to record browsing mode. CLEAR

12. Restore factory settings

The operation is as follows:

nort press FUN SET to select the operation;

Short press 米 to perform the operation. If

is

selected, the instrument will be restored to factory settings is selected, the system returns;

5 CLEAR to return to the measurement interface.

13. Font Size Setting

The operation is as follows: Short press FUN SET to select the operation;
Short press 米 to perform the operation.
Select on for Large Font;
Select off for Small Font;
Short press CLEAR to return to the measurement interface.

Angle Measurement

The angle measurement range is -90.0° to 90.0° ：

X axis angle reference diagram

Y axis angle reference diagram

Note: The angle direction of the laser level mode is the X axis (left and right) direction, and the angle direction of other modes is the Y axis (front and back) direction.

Switch the voice broadcast between Chinese and English

Under the instrument's shutdown circumstance, hold down ruN and ser , and short press 米 to activate.After turning on, the screen will display a startup LOGO. Wait for about 2 seconds and release run and ser?, the instrument will complete switching the voice broadcast between Chinese and English.

Error Information

When Err x information appears on the instrument, it indicates that the instrument may not be able to perform correct measurement. The following are possible error information and solutions.

Ranging Parameters

Laser Distance Parameters

Tape Parameters

Other Parameters

Note: \* "d" indicates the actual distance.

① Under adverse environmental conditions, such as excessive sunlight, large fluctuations in ambient temperature, weak reflectivity of the reflective surface, or insufficient battery power, measurement results may exhibit significant errors. In such cases, using a target reflector can improve measurement accuracy.

② Battery operating time/number of uses is based on laboratory environment test results.

Instrument Maintenance

● Do not store the instrument in a high temperature and humidity environment for a long time. If the instrument is not used for a long time, please put it in the pouch and store it in a cool and dry place.

● Please keep the device surface clean. Use a soft wet cloth to wipe the dust on the surface. Do not use corrosive liquid to clean the device. The laser window and focusing lens can be wiped in the same way as the optical device surface.

Packing List

Please check if the accessories are completed according to the below list.

深达威科技（广东）股份有限公司Sndway Technology (Guangdong) Co., LTD.

地址：广东省东莞市虎门镇虎门团结路58号
Add: No.58, Humen Tuanjie Road, Humen Town,
Dongguan City, Guangdong Province, China
全国咨询服务热线/ServiceHotline：400-125-6969
电话/Tel：0769-85265688
网址/web：www.sndway.com
邮箱/E-mail:market@sndway.com