该页无缩略图
磁耦式无杆气缸产品手册 MAGNETICALLY COUPLED RODLESS CYLINDER
工业机械Industrial Machinery
OEM/ODM
上海阮隆工业自动化电器有限公司Shanghai Ruan Long Industrial Automation Appliance Co., Ltd.
Shanghai Ruan Long Industrial Automation Appliance Co., LTD. (referred to as"YOLON Yuanlong Pneumatic") was founded on January 31, 2002, the company is headquartered in China's robot industrial park - Shanghai Songjiang Dongjing Industrial Park, is a production of pneumatic components, hydraulic systems and linear guide slide as the main business. Industrial automation manufacturer integrating R&D, design, manufacturing and service.
Yuanlong pneumatic advantage products are as follows:
Festo type rodless cylinder, Parker type rodless cylinder,SMC type rodless cylinder,OSTE rodless cylinder and independent research and development of non-standard rodless cylinder, according to customers to provide drawings and samples, to develop personalized products.
Professional production/sales/maintenance Middle and high-end mechanical rodless cylinder
In the modern industrial production with the increasing process of artificial intelligence, our products are widely used in the automation of textile, automobile, packaging, chemical industry, oil refining, metallurgy, fertilizer, paper making, medicine, construction, communication, pump valve, health and other industries. Welcome friends from all fields to visit and talk business negotiations.
Catalogue
Product Selection
RMT Series Guided rodless cylinder 01\~05
(Magnetic Coupled)
RMTL Series Guided rodless cylinder 06\~09
(Magnetic Coupled/Ball bearing)
RMS Series Rodless magnetic cylinder 10\~13
RWH Linies udess magneic cylinder 14\~16
CY1 eee aneticall coue rdels clider 17\~20
Y Sing antially coupe rodes clide 21\~22
CY3B Series magnetically coupled rodless cylinder 23\~24
Basic type
CYR e mgnetially cue ls clide 25\~27
Can be mounted from top and bottom.
Top bolt mounting
Installation and application
1. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
2. The medium used by cylinder shall be filtered to 40μm or below.
3. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
4. If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
5.Non-magnetically conductive materials are recommended for workpieces fitted to the cylinder, otherwise the lifetime may be halved if magnetically conductive materials are used.
Symbol
Product feature
1. This magnetic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling (carriage/piston). The carriage slide freelv along the main tube. The carriage slide freely along the main tube.
2. It is dust-proof as the isolation between the carriage and piston.
3. It is compact in space.
4. The non adjustable rubber bumpers and the adjustable pneumatic cushioning on both ends of the cylinder ensure the smooth action. If shock absorber be used, the cushioning effect is more perfection.
5. Double guides ensure high precision and can endure proper side load or offset load.
Specification
| Bore size(mm) | 16 | 20 | 25 | 32 | 40 |
| Acting type | Double acting | ||||
| Fluid | Air(to be filtered by 40μm filter element) | ||||
| Operating pressure | 0.2~0.7MPa(30~100psi(2.0~7bar) | 0.25~0.7MPa(36~100psi(2.5~7bar) | |||
| Proof pressure | 1.2MPa(175psi)(12.0bar) | ||||
| Temperature C | -20~70 | ||||
| Speed range mm/s | 50~400 | ||||
| Stroke tolerance mm | 0~250 +1.0 251~1000+1.5 $1 0 0 1 \sim \stackrel { + 2 . 0 } { 0 }$ 0 | ||||
| Cushion type | Fixed cushion Shock absorber(Available) | ||||
| Safe holding force N | 140 | 220 | 345 | 560 | 880 |
| Port size [Note1] | M5×0.8 | 1/8" | 1/4" | ||
Add) Refer to P362 for detail of sensor switch.
| Bore size (mm) | Standard stroke (mm) | Max.std stroke |
| 16 | 50 100 150 200 250300 350 400 450 500 | 750 |
| 20 | 50 100 150 200 250300 350400 450500600 700 750 800 | 1000 |
| 25 | 50 100 150 200 250 300 350400 450500600 700 750 800 | 1500 |
| 32 | 50 100 150 200 250300 350400 450500600 700 750 800 | 1500 |
| 40 | 50 100 150 200 250 300 350400 450 500 6600 700 750 800 900 1000 | 1500 |
Ordering code
| RMT 20 ×100 S □ □1 2 3 4 5 6 | |||||
| ④Magnet | ⑤Cushion type | ⑥Thread type [Note1] | |||
| ①Model | ②Bore size | ③Stroke | |||
| RMT: Guided rodlesscylinder(Magnetic162025Coupled) | 3240 | Refer to stroketable for details | Blank: Without magnet | Blank: With two adjustable nuts | Blank: PTG: GT: NPT |
| S: With magnet | A: With two shock absorbers | ||||
| NO. | Item | Material | NO. | Item | Material |
| 1 | Shock absorber | Combination | 21 | Magnet washer | Carbon steel |
| 2 | Washer cover | Aluminum alloy | 22 | End cover | Aluminum alloy |
| 3 | Stainless steel barrel | Stainless steel | 23 | Moveable core | Aluminum alloy |
| 4 | Washer | Carbon steel | 24 | C clip | Spring steel |
| 5 | Wearing ring | Wear resistant material | 25 | Guide I | Carbon steel |
| 6 | Magnet | Rare-earth material | 26 | Countersink screw | Carbon steel |
| 7 | Magnet | Rare-earth material | 27 | Fixing plate | Aluminum alloy |
| 8 | O-ring | NBR | 28 | Screw | Carbon steel |
| 9 | Wear ring | Wear resistant material | 29 | Spring washer | Spring steel |
| 10 | Scraping dust ring | Plastics | 30 | Rail | Aluminum alloy |
| 11 | Bumper | NBR | 31 | Bumper block | Stainless steel |
| 12 | O-ring | NBR | 32 | Barrel | Aluminum alloy |
| 13 | O-ring | NBR | 33 | Bushing | Bronze+Fill lubricant |
| 14 | Fixing plate | Aluminum alloy | 34 | Gasket | TPU |
| 15 | Nut | SS41 | 35 | Guide II | Carbon steel |
| 16 | Joint pole | Stainless steel | 36 | Countersink screw | Carbon steel |
| 17 | O-ring | NBR | 37 | O-ring | NBR |
| 18 | Piston seal | TPU | 38 | Steel ball | Stainless steel |
| 19 | Magnet | Aluminum alloy | 39 | Location washer | NBR |
| 20 | Magnet washer | Carbon steel | 40 | Magnet | Rare-earth material |
Installation and application
1. How to determine load:
| Bore size | Max.Load W(kg) | Stroke scope |
| 16 | 5.6 | ~300mm |
| 20 | 9.6 | ~500mm |
| 25 | 16 | ~500mm |
| 32 | 24 | ~600mm |
| 40 | 40 | ~600mm |
A.Find required load
B.Find moving velocity
C.Choose proper spec based on Load-Velocity chart
1.3. Load-Velocity chart (Load in vertical movement and moving velocity)
Load-Velocity chart (Load in vertical movement and moving velocity)
2. About shock absorber
2.1) Shock absorbers are consumable parts. When a decrease in energy absorption capacity is noticed, it must be replaced. Refer to the table below for shock absorber type.
2.2) Never loosen the bottom screw of the shock absorber. (It is not an adjustment screw.) That may cause oil leakage.
2.3) Refer to the table below for tightening torques of the shock absorber setting nut.
Never loosen the bottom screw of the shock absorber That may cause oil leakage.
②Mounting new shock absorber
③Adjust the shock absorber to proper position and tightening it with proper torque.
| Cylinder model | RMT16 | RMT20 | RMT25 | RMT32 | RMT40 |
| Shock absorber type | ACA1006-A | ACA1007-1N | ACA1412-1N | ACA2020-1N | ACA2020-1N |
| Tightening torque(Nm) | 1.67 | 1.67 | 3.14 | 10.80 | 10.80 |
3. About sensor switch
3.1) Sensor switch only can be used for the cylinder with magnet. The magnet located the four corner of body's(refer below) .The cylinder with magnet have both group mounting hole for mounting rail. please refer to below for ordering sensor switch, mounting it into the rsil's groove, adjusting it to proper position tightening it with proper torque.
Dimensions
RMT-A
| Bore size\Item | A | AD | AE | AF | B | BC | C | CA | D | J | JA | JB | JC | JD | JE | K | KB | KC | LD | P | R | RB | s | T | |
| 16 | 107 | 22.5 | 22.5 | 60 | 75 | 72 | 40 | 39 | 18 | 9.5 | 5 | 75 | 30 | 6.5 | 6.5 | M5×0.8Dp:10 | 30 | 50 | M6×1.0Dp:9.5 | 5.5 | M5×0.8 | 12 | 52 | 18.5 | 13.5 |
| 20 | 124 | 25.5 | 25.5 | 70 | 90 | 87 | 46 | 45 | 22.8 | 9.5 | 5 | 90 | 38 | 8.5 | 8.5 | M6×1.0Dp:10 | 40 | 70 | M6×1.0Dp:9.5 | 5.5 | 1/8" | 16 | 63 | 22.5 | 10 |
| 25 | 124 | 25.5 | 25.5 | 70 | 100 | 97 | 54 | 53 | 27.8 | 11 | 6.5 | 90 | 42 | 8.5 | 8.5 | M6×1.0Dp:10 | 40 | 70 | M8×1.25Dp:10 | 7 | 1/8" | 16 | 70 | 40.5 | 15 |
| 32 | 148 | 28.5 | 28.5 | 85 | 122 | 119 | 66 | 64 | 35 | 14 | 8 | 110 | 50 | 9.5 | 9.5 | M8×1.25Dp:12 | 40 | 75 | M10×1.5Dp:15 | 8.5 | 1/8" | 20 | 86 | 57.5 | 16 |
| 40 | 170 | 35.5 | 35.5 | 95 | 145 | 142 | 76 | 74 | 43 | 14 | 8 | 120 | 64 | 10.5 | 10.5 | M8×1.25Dp:12 | 65 | 105 | M10×1.5Dp:15 | 8.5 | 1/4" | 25 | 105 | 50.5 | 10 |
Top bolt mounting
Installation and application
1. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
2. The medium used by cylinder shall be filtered to 40μm or below.
3. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
4. If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
5.Non-magnetically conductive materials are recommended for workpieces fitted to the cylinder, otherwise the lifetime may be halved if magnetically conductive materials are used.
Guided rodless cylinder(Magnetic Coupled/Ball bearing)-RMTL Series
Product feature
1.This magnetic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling (carriage/piston). The carriage slide freely along the main tube.
2.It is dust-proof as the isolation between the carriage and piston.
3.It is compact in space.
4.The non adjustable rubber bumpers and the adjustable pneumatic cushioning on both ends of the cylinder ensure the smooth action. If shock absorber be used, the cushioning effect is more perfection.
5. Double guides ensure high precision and can endure proper side load or offset load.
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 | 40 |
| Acting type | Double acting | |||||
| Fluid | Air(to be filtered by 40μm filter element) | |||||
| Operating pressure | 0.2~0.7MPa(30~100psi(2.0~7bar) | |||||
| Proof pressure | 1.2MPa(175psi)(12.0bar) | |||||
| Temperature °C | -20~70 | |||||
| Speed range mm/s | 50~500 | |||||
| Stroke tolerance mm | 0~250 +1.0 251~1000+1.5 1001~+2.0000 | |||||
| Cushion type | Fixed cushion Shock absorber(Available) | |||||
| Safe holding force N | 55 | 140 | 220 | 345 | 560 | 880 |
| Port size [Note1] | M5×0.8 | 1/8" | 1/4" | |||
Add) Refer to P362 for detail of sensor switch.
| Bore size (mm) | Standard stroke (mm) | Max.std stroke |
| 10 | 50 100 150 200 250 300 | 500 |
| 16 | 50 100 150 200 250 300 350 400 450 500 | 750 |
| 20 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 | 1000 |
| 25 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 | 1500 |
| 32 | 50 100 150 200 250 300 350 400 450500 600 700 750 800 | 1500 |
| 40 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 | 1500 |
Ordering code
Inner structure and material of major parts
I data sheet for specific bore size.
| NO. | Item | Material | NO. | Item | Material |
| 1 | Fixing plate | Aluminum alloy | 24 | C clip | Spring steel |
| 2 | Washer cover | Aluminum alloy | 25 | Barrel | Stainless stee, |
| 3 | O-ring | NBR | 26 | Countersink screw | Carbon steel |
| 4 | O-ring | NBR | 27 | GuideI | Carbon steel |
| 5 | Nut | Carbon steel | 28 | Bumper | TPU |
| 6 | Joint pole | Stainless steel | 29 | Adjustable screw | Carbon steel |
| 7 | O-ring | NBR | 30 | Nut | Ss41 |
| 8 | Bumper | NBR | 31 | Fixing plate | Aluminum allo,X |
| 9 | Piston seal | TPU | 32 | Shock absorber | Combination |
| 10 | O-ring | NBR | 33 | Spring washer | Spring steel |
| 11 | Scraping dust ring | Plastics | 34 | Countersink screw | Carbon steel |
| 12 | Wearing ring | Wear resistant material | 35 | Rail | Aluminum allo |
| 13 | Piston | Aluminum alloy | 36 | Bumper block | Stainless stee |
| 14 | O-ring | NBR | 37 | Body | Aluminum allo, |
| 15 | Piston washer | Aluminum alloy | 38 | Bushing | |
| 16 | Magnet washer | Carbon steel | 39 | C clip | Spring steel |
| 17 | Magnet | Rare-earth material | 40 | Guide II | Carbon steel |
| 18 | Magnet washer | Carbon steel | 41 | Countersink screw | Carbon steel |
| 19 | Magnet | Rare-earth material | 42 | O-ring | NBR |
| 20 | Body cover | Aluminum alloy | 43 | Magnet | Rare-earth materi,al |
| 21 | Wearing ring | Wear resistant material | 44 | Location washer | NBR |
| 22 | Mobility iron | Aluminum alloy | 45 | Steel ball | Stainless stee |
| 23 | Washer | Aluminum alloy |
Installation and application
1. How to determine load
| Boresize | Max.LoadW(kg) | Strokescope |
| 10 | 2.4 | ~200mm |
| 16 | 5.6 | ~300mm |
| 20 | 9.6 | ~500mm |
| 25 | 16 | ~500mm |
| 32 | 24 | ~600mm |
| 40 | 40 | ~600mm |
2. About shock absorber
2.1) Shock absorbers are consumable parts. When a decrease in energy absorption capacity is noticed, it must be replaced. Refer to the table below for shock absorber type.
2.2) Never loosen the bottom screw of the shock absorber. (It is not an adjustment screw.) That may cause oil leakage.
2.3) Refer to the table below for tightening torques of the shock absorber setting nut.
| Bore size | 10 | 16 | 20 | 25 | 32 | 40 |
| Shock absorber type | ACA0806-1N | ACA1006-A | ACA1007-1N | ACA1412-1N | ACA2020-1N | ACA2020-1N |
| Tightening torque(Nm) | 1.67 | 1.67 | 1.67 | 3.14 | 10.80 | 10.80 |
3. About sensor switch
3.1) Sensor switch only can be used for the cylinder with magnet . The magnet Iocated the four corner of body's(refer below) .The cylinder with magnet have both group mounting hole for mounting rail. please refer to below for ordering sensor switch, mounting it into the rail's groove, adjusting it to proper position, tightening it with proper torque. 入
Dimensions
| Model | A | AD | AE | AF | B | BC | C | CA | D | J | JA | JB | JC | JD | JE | K | KB | KC | L | LD | P | R | RB | s |
| RMTL10 | 1112 | 0.52 | 0.5 | 68 | 80 | 77 | 34 | 33 | 12 | 8 | 4 | 85 | 26 | 7.5 | 7.5 | M4X0.7Dp:8 | 30 | 60 | M5X0.8Dp:9.5 | 4.5 | M5X0.8 | 10 | 52 | 17.5 |
| RMTL16 | 122 | 22.5 | 22.5 | 75 | 95 | 92 | 40 | 39 | 18 | 9.5 | 5 | 90 | 30 | 6.5 | 6.5 | M5X0.8Dp:10 | 45 | 70 | M6X1.0Dp:9.5 | 5.5 | M5X0.8 | 12 | 65 | 18.5 |
| RMTL20 | 1392 | 5.52 | 5.5 | 86 | 120 | 117 | 46 | 45 | 22.8 | 9.5 | 5 | 105 | 40 | 8.5 | 8.5 | M6X1.0Dp:10 | 50 | 90 | M6X1.0Dp:10 | 5.5 | 1/8 | 16 | 80 | 22.5 |
| RMTL25 | 1392 | 5.52 | 5.5 | 86 | 130 | 127 | 54 | 53 | 27.8 | 11 | 6.5 | 105 | 50 | 8.5 | 8.5 | M6X1.0Dp:10 | 60 | 100 | M8X1.25Dp:10 | 7 | 1/8 | 16 | 90 | 40.5 |
| RMTL32 | 159 | 28.528.5 | 100 | 160 | 157 | 66 | 64 | 35 | 14 | 8 | 121 | 60 | 9.5 | 9.5 | M8X1.25Dp:12 | 70 | 120 | M10X1.5Dp:15 | 8.5 | 1/8 | 201 | 105 | 7.5 | |
| RMTL40 | 2093 | 5.535.5 | 136 | 190 | 187 | 78 | 74 | 43 | 14 | 8 | 159 | 84 | 10.51 | 0.5 | M8X1.25Dp:12 | 90 | 140 | M10X1.5Dp:15 | 8.5 | 1/4 | 25 | 130 | 50.5 | |
Installation and application
1. The maxi load to move must be less than the theoretical holding force.
2. How to mount load:
2.1. Horizontal mounting: the permissible radial load must be lower than the figures in the chart below.
Horizontal oriented device
| Bore size | 10 | 16 | 20 | 25 | 32 | 40 |
| Max. Loadingtable weight(kg) | 0.4 | 1.0 | 1.1 | 1.2 | 1.5 | 2.0 |
In horizontal movement, please choose proper bore
size based on Force-Velocity chart
A.Find required pushing force
B.Find moving velocity
C.Choose proper spec based on force-Velocity chart
2.2. Vertical mounting: The load guiding method should adopt rolling support (linear guide rail, etc.); if the sliding support is used, the sliding resistance will increase due to the load mass and the torque generated by the load, resulting in poor operation.
3. Middle-stop:
| Boresize | Max. Load weight(Loadingtable+Load)(kg) |
| 10 | 2.2 |
| 16 | 5.6 |
| 20 | 8.8 |
| 25 | 15 |
| 32 | 24 |
| 40 | 37 |
pressure, magnetic core might disengage.
3.1 When using stopper mechanism to fulfill middle-stop application, working pressure of cylinder cannot exceeds figures stated in the table on the right. Once working pressure exceeds these figures, energy cannot be absorbed when hitting happens on external stopper and it may cause discouple. Shock absorber is recommended in stopper design. When adjusting the mechanism, observe that if hitting process is done smoothly and there is no bounce happened.
3.2 In designing middle-stop application for pneumatic system, allowable kinetic energy must be within figures shown in the table on the right. (Moving speed needs to be smaller than max velocity)
| 10 | 0.55MPa |
| 16 | 0.55MPa |
| 20 | 0.55MPa |
| 25 | 0.55MPa |
| 32 | 0.55MPa |
| 40 | 0.55MPa |
Note : When kinetic energy exceeds allowable figures, discouple will happen, which means body and piston inside the barrel will separate from each other, please be careful when design.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
| application in pneumatic system(ES)(J) | |
| 10 | 0.03 |
| 16 | 0.13 |
| 20 | 0.24 |
| 25 | 0.45 |
| 32 | 0.88 |
| 40 | 1.53 |
5. The medium used by cylinder shall be filtered to 40μm or below.
6. If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust jam cap shall be added in air inlet and outlet ports.;
7.Non-magnetically conductive materials are recommended for workpieces fitted to the cylinder, otherwise the lifetime may be halved if magnetically conductive materials are used.
Specification
| Series name | RMS Series | RMS、RMSF Series | RMSP Series | ||||||
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 | 40 | 16 | 20 | 32 |
| Acting type | Double acting | ||||||||
| Fluid | Air(to be filtered by 40μm filter element) | ||||||||
| Operating pressure | 0.2~0.7MPa(29~100psi)(2.0~7bar) | 0.15~0.7MPa(22~100psi)(1.5~7bar) [Note2] | |||||||
| Proof pressure | 1.2MPa(175psi)(12.0bar) | ||||||||
| Temperature °C | -20~70 | ||||||||
| Speed range mm/s | 50~400 | ||||||||
| Stroke tolerance mm | 0~250+1.0 251~1000+1.5 1001~ +2.0000 | ||||||||
| Cushion type | Bumper | Variable cushion+Fixed cushion | |||||||
| Port size [Note1] | M5×0.8 | 1/8" | 1/4" | M5×0.8 | 1/8" | ||||
| Safe holding force N | 55 | 140 | 220 | 345 | 560 | 880 | 140 | 220 | 560 |
[Note 2] when stopping in the middle, Operating pressure shall not exceed 0.55MPa, and buffer shall be provided when stopping at both ends.
| Bore size (mm) | Standard stroke (mm) | Max.std stroke |
| 10 | 50 100 150 200 250 300 | 1000 |
| 16 | 50 100 150 200 250 300 350 400 450 500 | 1500 |
| 20 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 | 2000 |
| 25 | 50 100150 200 250 300350400450500600 700 750800900 1000 | 2500 |
| 32 | 50 100150 200 250 300 350 400 450500600 700 750800 900 1000 | 3000 |
| 40 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 | 3000 |
Product feature
1. This magnetic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling (carriage/piston). The carriage slide freely along the main tube.
2. It is dust-proof as the isolation between the carriage and piston.
3. It is compact in space.
4. The non adjustable rubber bumpers and the adjustable pneumatic cushioning on both ends of the cylinder ensure the smooth action.
| ②Version | ③Bore size | ④Stroke | ⑤Mounting type [Note1] | ⑥Thread type [Note2] | |
| ①Model | |||||
| RMS: Rodless magneticcylinder | Blank: basic version | 10 16 20 25 32 40 | Refer to stroke tablefor details | Blank: non bracketLB: LB typeFA: FA type | Blank: PTG: GT: NPT |
| P: P size version | 16 20 32 | ||||
| F: F size version | 16 20 25 32 40 |
[Note2]Blank on thread code means metric M thread. There is only metric thread for Φ10/Φ16. if G or NPT thread is needed, please consult
Inner structure and material of major parts
| NO. | Item | Material | NO. | Item | Material |
| 1 | End cap | Aluminum alloy | 11 | Barrel | Stainless steel |
| 2 | Piston | Aluminum alloy | 12 | Cushion O-ring | TPU |
| 3 | Piston seal | TPU | 13 | Washer | Stainless steel |
| 4 | Magnet washer | Carbon steel | 14 | Cover | Aluminum alloy |
| 5 | Magnet | Rare-earth material | 15 | Magnet | Rare-earth material |
| 6 | Magnet washer | Carbon steel | 16 | Connecting rod | Stainless steel |
| 7 | Body | Aluminum alloy | 17 | Wear ring | Wear resistant material |
| 8 | Wear ring | Wear resistant material | 18 | Bumper | NBR |
| 9 | Scraping dust ring | Plastics | 19 | Nut | Stainless steel |
| 10 | C Clip | Spring steel |
Please contact AirTAC if you need inner structure & material data sheet for specific bore size.
RMS RMS-P
Dimensions
| Model\Item | A | AC | AD | AF | B | E | EA | F | FA | H | J | JA | K | KA | KB | KC | KD | P | PA | R |
| RMS10 | 91 | 73 | 9.5 | 48 | 25 | M10×1.0 | 9 | 14 | 4 | 15 | - | - | M3×0.5 | 4 | 30 | 16 | 21.5 | M5×0.8 | 5 | 17 |
| RMS16 | 103 | 83 | 10 | 57 | M10×1.0 | 10 | 14 | 4 | - | - | M4×0.7 | 5 | 35 | 19 | 24 | 5.5 | ||||
| RMSP16 | 112 | 92 | 14.5 | 57 | 35 | M10×1.0 | 10 | 14 | 4 | 20 | - | - | M4×0.7 | 7 | 34 | 25 | 29 | M5×0.8 | 7.5 | 22 |
| RMSF16 | 205 | 181 | 34 | 80 | M16×1.5 | 12 | 23 | 8 | 8 | 3 | M5×0.8 | 7.5 | 26 | 26 | 77.5 | 20 | ||||
| RMS20 | 132 | 106 | 15 | 66 | M20×1.5 | 13 | 26 | 8 | - | - | M4×0.7 | 5.5 | 50 | 25 | 28 | 1/8" | 7.5 | |||
| RMSP20 | 143 | 115 | 19.5 | 66 | 40 | M20×1.5 | 14 | 26 | 8 | 25 | - | - | M5×0.8 | 7 | 40 | 30 | 37.5 | 10 | 29 | |
| RMSF20 | 217 | 185 | 29.5 | 90 | M22×1.5 | 16 | 29 | 7 | 8 | 2.5 | M5×0.8 | 8.5 | 32 | 32 | 76.5 | 15 | ||||
| RMS25 | 137 | 111 | 15 | 70 | M26×1.5 | 13 | 32 | 8 | - | - | M5×0.8 | 7.5 | 50 | 30 | 30.5 | 1/8" | 7.5 | 33.5 | ||
| RMSF25 | 238 | 206 | 37.5 | 90 | 46 | M22×1.5 | 16 | 29 | 7 | 30 | 10 | 3 | M6×1.0 | 10 | 36 | 36 | 85 | 1/8" | 20 | |
| RMS32 | 156 | 124 | 16 | 80 | M26×1.5 | 32 | 8 | - | - | 8 | 37 | 1/8" | 8 | |||||||
| RMSP32 | 165 | 133 | 20.5 | 80 | 60 | M26×1.5 | 16 | 32 | 8 | 36 | - | - | M6×1.0 | 8 | 50 | 40 | 41.5 | 10 | 39.5 | |
| RMSF32 | 270 | 238 | 48 | 110 | M30×1.5 | 36 | 7 | 10 | 3.5 | 12.5 | 48 | 48 | 95 | 1/8" | 28 | |||||
| RMS40 | 182 | 150 | 22 | 92 | M32×2.0 | 41 | 10 | - | - | M6×1.0 | 9 | 60 | 40 | 45 | 1/4" | 11 | 49.5 | |||
| RMSF40 | 327 | 295 | 44.5 | 130 | 70 | M38×1.5 | 16 | 46 | 8 | 46 | 12 | 4.5 | M8×1.25 | 16 | 50 | 56 | 122.5 | 1/4" | 25 |
| Accessories\Bore size | 10 | 16 | 20 | 25 | 32 | 40 | |||||||
| RMS | RMS | RMSP | RMSF | RMS RMSP | RMSF | RMS | RMSF | RMS RMSP | RMSF | RMS | RMSF | ||
| Mountingaccessories | LB | F-PB12LB | F-RMS16LB | F-RMSF16LB | F-RMS20LB | F-RMSF20LB | F-RMS25LB F | -RMSF25LB | F-RMS32LB | F-RMSF32LB | F-RMS40LB | F-RMSF40LB | |
| FA | F-PB12FA | F-PB12FA | F-MAI16FA | F-MF20FA | F-MA20FA | F-MF32FA | F-MA20FA | F-MF32FA | F-MA40FA | F-MF40FA | |||
Accessory selection
| Accessories\Cylinder model | ||||
| RMS | RMSP | RMSF | ||
| Mountingaccessories | LB | ● | ||
| FA | ||||
| Accessories\Bore size | 10 | 16 | 20 | 25 | 32 | 40 | |||||||||
| RMS | RMS | RMSP | RMSF | RMS | RMSP | RMSF | RMS | RMSF | RMS | RMSP | RMSF | RMS | RMSF | ||
| Mounting | LB | △ | △ | △ | △ | △ | △ | △ | △ | Δ | △ | △ | |||
| accessories | FA | △ | △ | △ | △ | 0 | △ | o | △ | 0 | △ | - | |||
Dimensions
RMS-LB RMSP-LB
| Bore size\Item | AA | AC | C | F | ||||
| RMS | RMSP | RMS | RMSP | RMS | RMSP | RMS | RMSP | |
| 10 | 103 | ■ | 91 | 73 | ■ | 9 | ■ | |
| 16 | 113 | 122 | 101 | 110 | 83 | 92 | 10 | 10 |
| 20 | 158 | 167 | 142 | 151 | 106 | 115 | 13 | 14 |
| 25 | 167 | - | 151 | - | 111 | - | 13 | - |
| 32 | 184 | 193 | 170 | 179 | 124 | 133 | 16 | 16 |
| 40 | 216 | 196 | - | 150 | - | 16 | - | |
| Bore size\Item | AE | AF | AH | AL | AP | AQ | AT | B |
| 10 | 42 | 33 | 14 | 9 | 5.5 | 6 | 2.5 | 25 |
| 16 | 42 | 33 | 20 | 9 | 5.5 | 6 | 2.5 | 35 |
| 20 | 43 | 30 | 23 | 18 | 6.5 | 8 | 3 | 40 |
| 25 | 54 | 40 | 26 | 20 | 6.5 | 8 | 4 | 46 |
| 32 | 62 | 46 | 33 | 23 | 7 | 7 | 4 | 60 |
| 40 | 75 | 55 | 38 | 23 | 9 | 10 | 5 | 70 |
RMS-FA RMSP-FA
Φ16\~Φ32
| Bore size\ltem | B | BB | BC | BD | BE | BF | BP | C | F | ||
| RMS | RMSP | RMS | RMSP | ||||||||
| 10 | 25 | 3 | 20 | - | 42 | 33 | 5.5 | 73 | ■ | 9 | ■ |
| 16 | 35 | 3 | 20 | 1 | 42 | 33 | 5.5 | 83 | 92 | 10 | 10 |
| 20 | 40 | 3.5 | 34 | - | 75 | 60 | 7 | 106 | 115 | 13 | 14 |
| 25 | 46 | 4 | 40 | - | 75 | 60 | 7 | 111 | ■ | 13 | ■ |
| 32 | 60 | 4 | 40 | - | 75 | 60 | 7 | 124 | 133 | 16 | 16 |
| 40 | 70 | 4 | 52 | 36 | 82 | 66 | 7 | 150 | - | 16 | - |
RMSF-LB
Φ16\~Φ25
Φ32、Φ40
| Bore size\ltem | AA | AC | AE | AF | AH | AL | AM | AP | AQ | AT | B | C | F |
| 16 | 221 | 209 | 44 | 32 | 20 | 14 | - | 5.5 | 6 | 2.5 | 35 | 181 | 12 |
| 20 | 235 | 219 | 54 | 40 | 23 | 17 | ■ | 6.5 | 8 | 3 | 40 | 185 | 16 |
| 25 | 256 | 240 | 54 | 40 | 26 | 17 | - | 6.5 | 8 | 4 | 46 | 206 | 16 |
| 32 | 280 | 266 | 66 | 52 | 33 | 14 | 28 | 7 | 7 | 4 | 60 | 238 | 16 |
| 40 | 353 | 333 | 80 | 60 | 38 | 19 | 30 | 9 | 10 | 5 | 70 | 295 | 16 |
RMSF-FA
Φ16\~Φ25
Φ32
| Bore size\Item | B | BB | BC | BD | BE | BF | BP | C | F |
| 16 | 35 | 3 | 30 | – | 52 | 40 | 5.5 | 181 | 12 |
| 20 | 40 | 3.5 | 38 | = | 64 | 50 | 6.5 | 185 | 16 |
| 25 | 46 | 3.5 | 38 | - | 64 | 50 | 6.5 | 206 | 16 |
| 32 | 60 | 4 | 50 | 36 | 84 | 70 | 6.5 | 238 | 16 |
| Boresize | Max.LoadW(kg) | Strokescope |
| 10 | 1.4 | ~200mm |
| 16 | 3 | ~300mm |
| 20 | 3.6 | ~500mm |
| 25 | 4.8 | ~500mm |
3. About adjusting screw:
RMH series is compacted with two adjusting screws, but you can replace them with oil shock absorber by conditions.
| Bore size | Shock absorber type |
| 10 | ACA0806-1 |
| 16 | ACA1007-1 |
| 20 | ACA1007-1 |
| 25 | ACA1412-1 |
4. When use external limiter to stop load middle way: please refer to RMS series.
5. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
6. The medium used by cylinder shall be filtered to 40μm or below.
7. If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust jam cap shall be added in air inlet and outlet ports.
8.Non-magnetically conductive materials are recommended for workpieces fitted to the cylinder, otherwise the lifetime may be halved if magnetically conductive materials are used.
Rodless magnetic cylinder(With Linear guide)--RMH Series
| Bore size(mm) | 10 | 16 | 20 | 25 |
| Acting type | Double acting | |||
| Fluid | Air(to be filtered by 40μm filter element) | |||
| Operating pressure | 0.2~0.7MPa(28~100psi)(2~7bar) | |||
| Proof pressure | 1.2MPa(175psi)(12.0bar) | |||
| Temperature ℃ | -20~70 | |||
| Speed range mm/s | 50~400 | |||
| Stroke tolerance mm | 0~250+1.0251~800+1.500 | |||
| Cushion type | Bumper | |||
| Port size [Note1] | M5×0.8 | 1/8" | ||
| Safe holding force N | 55 | 140 | 220 | 345 |
| Bore size (mm) | Standard stroke (mm) |
| 10 | 50 100150200250 300 |
| 16 | 50 100150200250300350400450500 |
| 20 | 50 100150200250300350400450500600 700750 800 |
| 25 | 50100150200250300 350400450500600700750 800 |
Product feature
1. This magnetic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets.
The mobile carriage is also equipped with magnets to provide magnetic coupling (carriage/piston). The carriage slide freely along the main tube.
2. It is dust-proof as the isolation between the carriage and piston.
3. It is compact in space.
4. The non adjustable rubber bumpers and the adjustable pneumatic cushioning on both ends of the cylinder ensure the smooth action.
5. With the slide rail, the operation accuracy of the body is high, the body does not rotate accurately, and the load capacity is strong.
Ordering code
| ①Model | ②Bore Size | ③ Stroke [Note1] | ④Magnet | ⑤Thread type [Note2] |
| RMH: Rodless magnetic cylinder(With linear guide) | 10 16 20 25 | Refer to stroke table for details | S: With magnet | Blank : PT threadG : G threadT:NPT thread |
[Note2]Blank on thread code means metric M thread. There is only metric thread for Φ10/Φ16, if NPT or G thread is needed, please consult.
Rodless magnetic cylinder(With Linear guide)--RMH Series
| NO. | Item | Material | NO. | Item | Material |
| 1 | End cover | Aluminum alloy | 18 | Barrel | Stainless steel |
| 2 | Body | Aluminum alloy | 19 | Nut | Stainless steel |
| 3 | C Clip | TPU | 20 | O-ring | NBR |
| 4 | O-ring | NBR | 21 | End cover | Aluminum alloy |
| 5 | Washer | Stainless steel | 22 | Steel ball | Stainless steel |
| 6 | Scraping dust ring | Plastics | 23 | Pluger screw | Carbon steel |
| 7 | Cover | Aluminum alloy | 24 | Fixed block | Aluminum alloy |
| 8 | O-ring | NBR | 25 | Push block | Plastics |
| 9 | Magnet | Rare-earth material | 26 | Magnet | Rare-earth material |
| 10 | Magnet washer | Carbon steel | 27 | Jointing block | Aluminum alloy |
| 11 | Magnet | Rare-earth material | 28 | Bolt | Alloy steel |
| 12 | Magnet washer | Carbon steel | 29 | Linear rail | - |
| 13 | Connecting rod | Stainless steel | 30 | Bolt | Alloy steel |
| 14 | Wear ring | Wear resistant material | 31 | Bolt | Alloy steel |
| 15 | Piston seal | TPU | 32 | Bumper | TPU |
| 16 | Bumper | NBR | 33 | Nut | Alloy steel |
| 17 | Piston | Aluminum alloy | 34 | Bolt | Alloy steel |
Dimensions
| Type\Item | A | AD | AF | B | C | CA | D | E | F | G | H | I | J | JA | JB | JC | K | KB | KC | L | LA | LB | LC |
| RMH10 | 86 | 10.5 | 52 | 52 | 30 | 29 | 12 | 14 | 6.5 | 1 | 14 | M8X1.0 | 6 | 3.5 | 78 | 14 | M3X0.5dp:4 | 20 | 15 | M4X0.7dp:6 | M4X0.7dp:6 | 16 | 4 |
| RMH16 | 106 | 14 | 63 | 61 | 36 | 35 | 18 | 17.5 | 7.5 | 1 | 17 | M10X1.0 | 8 | 4.5 | 96 | 18 | M4X0.7dp:5 | 25 | 18 | M5X0.8dp:7 | M5X0.8dp:7 | 20 | 6 |
| RMH20 | 124 | 14 | 76 | 71 | 39 | 38 | 22.8 | 20 | 10 | 1 | 18.5 | M10X1.0 | 9.5 | 5.5 | 112 | 17 | M4X0.7dp:5 | 40 | 22 | M6X1.0dp:8 | M6X1.0dp:8 | 22 | 5 |
| RMH25 | 137 | 17.5 | 77 | 76 | 45 | 43 | 27.8 | 22.5 | 12.5 | 2 | 21.5 | M14X1.5 | 9.5 | 5.5 | 124 | 20 | M5X0.8dp:6 | 40 | 28 | M6X1.0dp:8 | M6X1.0dp:8 | 26 | 7 |
| Type\ItemStroke | P | LD | LE | M | PA | PB | PC | PD | Q | S | T | N | |||||||||||||
| 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 | 750 | 800 | ||||||||||||
| RMH10 | M5X0.8 | 3.5 | 10 | 1.5 | 4 | 7.5 | 11 | 2 | 18 | 10.5 | 14.5 | 2 | 3 | 4 | 5 | 6 | 7 | - | - | - | - | - | - | - | - |
| RMH16 | M5X0.8 | 4.5 | 10 | 1.5 | 5.5 | 8.5 | 15 | 3.5 | 28 | 11 | 15 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | - | - | - | - |
| RMH20 | 1/8" | 5.5 | 12 | 1.5 | 0 | 10 | 18.5 | 0 | 37 | 8.5 | 12.5 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 13 | 15 | 16 | 17 |
| RMH25 | 1/8" | 5.5 | 12 | 1.5 | 0 | 11 | 22 | 0 | 43.5 | 16 | 22 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 13 | 15 | 16 | 17 |
Standard stroke Refer to page 1215 for the standard strokes.
| Specifications | |||||||
| Bore size (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 |
| Fluid | Air | ||||||
| Proof pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.7 MPa | ||||||
| Minimum operating pressure | 0.18 MPa | ||||||
| Ambient and fluid temperature | -10 to 60°℃ (No freezing) | ||||||
| Piston speed* | 50 to 400 mm/s | ||||||
| Cushion | Rubber bumper/Shock absorber | ||||||
| Lubrication | Non-lube | ||||||
| Stroke length tolerance (mm) | 0 to 250 st:+1.0251 to 1000 st:+1.41001st or longer: +1.8+1.80 | ||||||
| Magnetic holding force (N) | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 |
| Stroke | ||
| Bore size(mm) | Standard stroke (mm) | manufacturablestroke (mm) |
| 6 | 50, 100,150,200 | 300 |
| 10 | 50, 100, 150, 200, 250, 300 | 500 |
| 15 | 50, 100, 150, 200, 250, 300, 350, 400, 450, 500 | 750 |
| 20 | 100, 150, 200, 250, 300, 350, 400, 450,500,600, 700, 800 | 1000 |
| 25 | 1500 | |
| 32 | ||
| 40 | 100, 150, 200, 250, 300, 350, 400, 450,500, 600, 700, 800, 900, 1000 | 1500 |
Slider type• (Slide bearing type)
| Nil | Bilateral piping type | |||
 | ||||
| Centralized piping type G | e Plate | |||
Note) For centralized piping, the port will be placed on the plate A side.
| 6 | 6 mm |
| 10 | 10 mm |
| 15 | 15 mm |
| 20 | 20 mm |
| 25 | 25 mm |
| 32 | 32 mm |
| 40 | 40 mm |
| Port thread type | ||
| Symbol | Type | Bore size (mm) |
| Nil | M thread | 6,10,15 |
| Rc | 20,25, 32,40 | |
| TN | NPT | |
| TF | G | |
Made to Order Refer to page 1215 for details.
| Nil | 2 pcs. |
| S | 1 pc. |
| n | "n” pcs. |
\*Refer to the table below for the applicable auto switch model.
Note) Auto switch rail and magnet for auto switch included as standard.
| Nil | Bumper bolt (resin tipped): Mounted on both sides |  | |
| B | Shock absorber/ Adjustment bolt (metal ended): Mounted on both sides | Bumper bolt (Same as the opposite side) Adjustment bolt (Same as the opposite side)  | |
| BS | Shock absorber/ Adjustment bolt (metal ended): Plate A side Bumper bolt (resin tipped): Plate B side or C side | Shock absorber (Same as the opposite side) Bumper bolt Adjustment bolt  | Shock absorber |
| Type | Special function | Electricalentry | lielraeionil | Wiring(Output) | Load voltage | Auto switch model | Lead wire l | ength (m) | Pre-wiredconnector | Applicable load | |||||||||
| DC | AC | Perpendicular | In-line | 0.5(Nil) | 1(M) | 3(L) | 5(Z) | ||||||||||||
| Ssolt s so iitch | Grommet | 3-wire (NPN) | 5 V, 12 V | M9NV | M9N | ● | ● | 2 | O | O | IC circuit | Relay,PLC | |||||||
| 3-wire (PNP) | M9PV | M9P | ● | ● | O | O | |||||||||||||
| 2-wire | 12 V | M9BV | M9B | ● | ● | ● | O | O | |||||||||||
| Diagnostic indication(2-color indicator) | Yes | 3-wire (NPN) | 24 V | 5 V, 12 V | M9NWV | M9NW | ● | ● | ● | O | O | IC circuit | |||||||
| 3-wire (PNP) | 24 | M9PWV | M9PW | ● | ● | ● | O | O | |||||||||||
| 2-wire | 12 V | M9BWV | M9BW | ● | ● | ● | O | O | |||||||||||
| Water resistant(2-color indicator) | 3-wire (NPN) | 5 V,12 V | M9NAV*1 | M9NA*1 | O | O | ● | O | O | IC circuit | |||||||||
| 3-wire (PNP) | M9PAV*1 | M9PA*1 | O | O | ● | O | O | ||||||||||||
| 2-wire | 12 V | M9BAV*1 | M9BA*1 | O | O | ● | O | O | |||||||||||
| autit sitchRed | Grommet | Yes(No | 3-wireNPN equivalent) | 5V | A96V | A96 | IC circuit | ||||||||||||
| 2-wire | 24 V | 12 V | 100 V | A93V*2 | A93 | C | ● | ● | ● | Relay,PLC | |||||||||
| 100 V or less | A90V | A90 | ● | IC circuit | |||||||||||||||
Please consult with SMC regarding water resistant types with the above model numbers.
\*21 m type lead wire is only applicable to D-A93.
\*Lead wire length symbols: 0.5 m ........... Nil (Example) M9NW\* Solid state auto switches marked with “O” are produced upon receipt of order.
1 m . M(Example) M9NWM
3 m ...... L (Example) M9NWL
5 m .. Z (Example) M9NWZ
\* There are other applicable auto switches other than listed above. For details, refer to page 1220.
\*For details about auto switches with pre-wired connector, refer to pages 1358 and 1359.
\*Auto switches are shipped together, (but not assembled).
Overall dimensions (mm)
| Model | A | B | C | D | d | E | F | G | GA | GB | GP | H | HA | HB | HC | HG | HP | HT | JJ | K | L | LD | M | MM | NA | NB | NC |
| CY1S6-Z | 6 | 6.5 | 3.3 | 7.6 | 8 | 2 | 25 | 5 | 5 | 5 | 30 | 27 | 20.5 | 20.5 | 15.5 | 8 | 26 | 15.5 | M4 x 0.7 | 3 | 40 | 3.5 | 6 | M4 x 0.7 | 11 | 14 | 19 |
| CY1S10-Z | 7.5 | 8 | 4.4 | 12 | 10 | 2.5 | 31.5 | 6.5 | 5 | 6 | 40 | 34 | 25 | 27 | 17 | 13.5 | 33 | 17 | M4 x 0.7 | 6 | 45 | 4.6 | 6 | M4 x 0.7 | 10.5 | 16.5 | 28 |
| CY1S15-Z | 7.5 | 9.5 | 5.4 | 16.6 | 12 | 2 | 38 | 6.5 | 5 | 6 | 52 | 40 | 28 | 29.5 | 20.5 | 15 | 39 | 20.5 | M4 x 0.7 | 11 | 60 | 5.8 | 8 | M5 x 0.8 | 10.5 | 16.5 | 28 |
| CY1S20-Z | 10 | 9.5 | 5.4 | 21.6 | 16 | 2 | 44 | 8.5 | 5.5 | 8 | 62 | 46 | 36 | 37.5 | 24 | 19 | 45 | 20 | M6 x 1 | 16 | 70 | 5.8 | 10 | M6 x 1 | 10.5 | 22 | 28 |
| CY1S25-Z | 10 | 11 | 6.5 | 26.4 | 16 | 2 | 52 | 8.5 | 5.5 | 8 | 70 | 54 | 40.5 | 40.5 | 27.5 | 21.5 | 53 | 21 | M6 x 1 | 20 | 70 | 7 | 10 | M6 x 1 | 12.5 | 22 | 49 |
| CY1S32-Z | 12.5 | 14 | 8.6 | 33.6 | 20 | 2 | 64 | 9.5 | 5.5 | 9 | 86 | 66 | 50 | 50 | 33 | 26 | 64 | 24 | M8 x 1.25 | 26 | 85 | 9 | 12 | M8 x 1.25 | 11.5 | 23.5 | 52 |
| CY1S40-Z | 12.5 | 14 | 8.6 | 41.6 | 25 | 2 | 74 | 10.5 | 5.5 | 10 | 104 | 76 | 55.5 | 55.5 | 38 | 27 | 74 | 27 | M8 x 1.25 | 28 | 95 | 9 | 12 | M8 x 1.25 | 10.5 | 22.5 | 51 |
| Model | NN | P | PA | PB | PW | Q | QW | R | R1adjustable | Bumper boltrangee(Both sides: R1 x2) | S | T | UU | W | Y1adjustable(B | Adjustment boltrangeoth siddes: 1 x2) | Z | Shockabsorber | ||
| Nil | TN | TF | ||||||||||||||||||
| CY1S6-Z | M4 x 0.7 | M3×0.5 | 25 | 25 | 49 | 52 | 16 | 1 | 7.5 | 15 | 42 | 10 | M6 x 0.75 | 46 | 11.5 | 23 | 62 | RJ0604N | ||
| CY1S10-Z | M4 x 0.7 | M5×0.8 | 25 | 38 | 61 | 60 | 24 | 1 | 5.5 | 11 | 47 | 12.5 | M8 x 1 | 58 | 14 | 28 | 72 | RJ0806HN | ||
| CY1S15-Z | M4 x 0.7 | M5×0.8 | 30 | 50 | 76 | 75 | 30 | 1 | 5.5 | 11 | 62 | 12.5 | M8 x 1 | 73 | 14 | 28 | 87 | RJ0806LN | ||
| CY1S20-Z | M6 × 1 | Rc1/8 | NPT1/8 | G1/8 | 40 | 70 | 90 | 90 | 38 | 1.5 | 4.5 | 9 | 73 | 16.5 | M10 x 1 | 87 | 18.5 | 37 | 106 | RJ1007LN |
| CY1S25-Z | M6 × 1 | Rc1/8 | NPT1/8 | G1/8 | 40 | 70 | 99 | 90 | 42 | 1.5 | 4.5 | 9 | 73 | 16.5 | M14 x 1.5 | 96 | 18.5 | 37 | 106 | RJ1412LN |
| CY1S32-Z | M8 x 1.25 | Rc1/8 | NPT1/8 | G1/8 | 40 | 75 | 119 | 110 | 50 | 3 | 5.5 | 11 | 91 | 18.5 | M20 x 1.5 | 116 | 18.5 | 37 | 128 | RJ2015HN |
| CY1S40-Z | M8 x 1.25 | Rc1/4 | NPT1/4 | G1/4 | 65 | 105 | 142 | 120 | 64 | 2 | 4.5 | 9 | 99 | 20.5 | M20 × 1.5 | 139 | 17.5 | 35 | 140 | RJ2015LN |
(mm)
| Model | A | B | C | D | d | E | F | G | GA | GB | GP | H | HA | HB | HC | HG | HP | HT | JJ | K | L | LD | M | MM | NA | NB | NC | ND | NE |
| CY1SG6-Z | 6 | 6.5 | 3.3 | 7.6 | 8 | 2 | 25 | 5 | 5 | 5 | 30 | 27 | 20.5 | 20.5 | 15.5 | 8 | 26 | 15.5 | M4 x 0.7 | 3 | 40 | 3.5 | 6 | M4 x 0.7 | 11 | 14 | 19 | 7 | 10 |
| CY1SG10-Z | 7.5 | 8 | 4.4 | 12 | 10 | 2.5 | 31.5 | 6.5 | 5 | 6 | 40 | 34 | 25 | 27 | 17 | 13.5 | 33 | 17 | M4 x 0.7 | 6 | 45 | 4.6 | 6 | M4 x 0.7 | 10.5 | 16.5 | 28 | 6.5 | 12.5 |
| CY1SG15-Z | 7.5 | 9.5 | 5.4 | 16.6 | 12 | 2 | 38 | 6.5 | 5 | 6 | 52 | 40 | 28 | 29.5 | 20.5 | 15 | 39 | 20.5 | M4 x 0.7 | 11 | 60 | 5.8 | 8 | M5 × 0.8 | 10.5 | 16.5 | 28 | 5.5 | 11.5 |
| CY1SG20-Z | 10 | 9.5 | 5.4 | 21.6 | 16 | 2 | 44 | 8.5 | 5.5 | 8 | 62 | 46 | 36 | 37.5 | 24 | 19 | 45 | 20 | M6 x 1 | 16 | 70 | 5.8 | 10 | M6 x 1 | 10.5 | 22 | 28 | 5.5 | 17 |
| CY1SG25-Z | 10 | 11 | 6.5 | 26.4 | 16 | 2 | 52 | 8.5 | 5.5 | 8 | 70 | 54 | 40.5 | 40.5 | 27.5 | 21.5 | 53 | 21 | M6 x 1 | 20 | 70 | 7 | 10 | M6 x 1 | 12.5 | 22 | 49 | 7.5 | 17 |
| CY1SG32-Z | 12.5 | 14 | 8.6 | 33.6 | 20 | 2 | 64 | 9.5 | 5.5 | 9 | 86 | 66 | 50 | 50 | 33 | 26 | 64 | 24 | M8 x 1.25 | 26 | 85 | 9 | 12 | M8 x 1.25 | 11.5 | 23.5 | 52 | 5.5 | 17.5 |
| CY1SG40-Z | 12.5 | 14 | 8.6 | 41.6 | 25 | 2 | 74 | 10.5 | 5.5 | 10 | 104 | 76 | 55.5 | 55.5 | 38 | 27 | 74 | 27 | M8 x 1.25 | 28 | 95 | 9 | 12 | M8 x 1.25 | 10.5 | 22.5 | 51 | 4.5 | 16.5 |
| Model | NF | NN | P | PA | PB | PW | Q | QW | R | R1 | Bumper boltadjustablerange(Both sides: R1 x2) | S | T | TT | UU | W | Y1 | Y2adjustabl | Adjustment botrange(Both sides: Y1+ Y2) | ZZ | Shockabsorber | ||
| Nil | TN | TF | |||||||||||||||||||||
| CY1SG6-Z | 15 | M4 x 0.7 | M3 × 0.5 | 25 | 25 | 49 | 52 | 16 | 1 | 7.5 | 15 | 42 | 10 | 14 | M6 x 0.75 | 46 | 11.5 | 7.5 | 19 | 66 | RJ0604N | ||
| CY1SG10-Z | 24 | M4 x 0.7 | M5 × 0.8 | 25 | 38 | 61 | 60 | 24 | 1 | 5.5 | 11 | 47 | 12.5 | 16.5 | M8 x 1 | 58 | 14 | 10 | 24 | 76 | RJ0806HN | ||
| CY1SG15-Z | 23 | M4 x 0.7 | M5 × 0.8 | 30 | 50 | 76 | 75 | 30 | 1 | 5.5 | 11 | 62 | 12.5 | 17.5 | M8 x 1 | 73 | 14 | 9 | 23 | 92 | RJ0806LN | ||
| CY1SG20-Z | 23 | M6 x 1 | Rc1/8 | NPT1/8 | G1/8 | 40 | 70 | 90 | 90 | 38 | 1.5 | 4.5 | 9 | 73 | 16.5 | 21.5 | M10 x 1 | 87 | 18.5 | 13.5 | 32 | 111 | RJ1007LN |
| CY1SG25-Z | 44 | M6 × 1 | Rc1/8 | NPT1/8 | G1/8 | 40 | 70 | 99 | 90 | 42 | 1.5 | 4.5 | 9 | 73 | 16.5 | 21.5 | M14 x 1.5 | 96 | 18.5 | 13.5 | 32 | 111 | RJ1412LN |
| CY1SG32-Z | 46 | M8 x 1.25 | Rc1/8 | NPT1/8 | G1/8 | 40 | 75 | 119 | 110 | 50 | 3 | 5.5 | 11 | 91 | 18.5 | 24.5 | M20 x 1.5 | 116 | 18.5 | 12.5 | 31 | 134 | RJ2015HN |
| CY1SG40-Z | 45 | M8 x 1.25 | Rc1/4 | NPT1/4 | G1/4 | 65 | 105 | 142 | 120 | 64 | 2 | 4.5 | 9 | 99 | 20.5 | 26.5 | M20 × 1.5 | 139 | 17.5 | 11.5 | 29 | 146 | RJ2015LN |
| Specifications | ||||||||
| Bore size (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | |
| Fluid | Air | |||||||
| Proof pressure | 1.05 MPa | |||||||
| Maximum operating pressure | 0.7 MPa | |||||||
| Minimum operating pressure | 0.18 MPa | |||||||
| Ambient and fluid temperature | -10 to 60°C (No freezing) | |||||||
| Piston speed* | 50 to 500 mm/s | |||||||
| Cushion | Rubber bumper/Shock absorber | |||||||
| Lubrication | Not required (Non-lube) | |||||||
| Stroke length tolerance (mm) | 0 to 250 st:: +1., 2 t 1000 st:++1.4, 1001 st and up:+1.4 $^ { + 1 . 8 } _ { 0 }$ 0 | |||||||
| Holding force (N) | Type H | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 |
| Type L | 一 | 一 | 81.4 | 154 | 221 | 358 | 569 | |
| Standard equipment | Auto switch mounting rail | |||||||
| Stroke | ||
| Bore size(mm) | Standard stroke (mm) | Maximum availablestroke (mm) |
| 6 | 50, 100, 150, 200 | 300 |
| 10 | 50, 100, 150, 200, 250, 300 | 500 |
| 15 | 50, 100, 150, 200, 250, 300, 350400,450, 500 | 750 |
| 20 | 100, 150, 200, 250, 300, 350400, 450, 500, 600, 700, 800 | 1000 |
| 25 | 1500 | |
| 32 | ||
| 40 | 100, 150, 200, 250, 300, 350400, 450, 500, 600, 700, 800900,1000 | 1500 |
How to Order
| 6 | 6 mm | 25 | 25 mm |
| 10 | 10 mm | 32 | 32 mm |
| 15 | 15 mm | 40 | 40 mm |
| 20 | 20 mm | ||
| Symbol | Type | Bore size |
| Nil | M thread | 06,010,015 |
| Rc | 020, ø25,032,ø40 | |
| TN | NPT | |
| TF | G |
Magnetic holding force Refer to page 1231 for specifications.
Refer to “Standard Stroke” on page 1231.
| Nil | 2 pcs. |
| S | 1 pc. |
| n | "n" pcs. |
Standard stroke
| Nil | With adjusting bolt |
| B | With shock absorbers (2 pcs.) |
| BS | With shock absorber (With plate A)*Installed on side A at time of shipment. |
| Type | Bore size (mm) | ||||
| 6 | 10,15 | 20 | 25 | 32,40 | |
| Standard (shock absorberRB series) | RB0805 | RB1006 | RB1411 | RB2015 | |
| Shock absorber soft typeRJ series type (-XB22) | RJ0805 | RJ0806H | RJ1007H | RJ1412H | 一 |
Overall dimensions (mm)
Slider type/Ball bushing bearing
| Model | A | B | C | D | d | EA | EB | FA | FB | G | GP | H | HA | HB | HG | HI | HO | HP | HS | HT | J | JK | |||||||||||||||
| CY1L6 | 7 | 6.5 | 3 | 7.6 | 8 | 6 | 36 | 27 | 5 | 10 | 11 | 9 | 25 | 26 | 14 | 16 | M4 x 0.7 | 6.5 | |||||||||||||||||||
| CY1L10 | 8.5 | 8 | 4 | 12 | 10 | 6 | 12 | 3 | 5 | 7.5 | 50 | 34 | 6 | 17.5 | 14.5 | 13.5 | 33 | 33 | 21.5 | 18 | M5 x 0.8 | 9.5 | |||||||||||||||
| Model | L | LD | M | MM | (N) | (NA) | (NB) | NN | PA* | PB | PW | Q | QW | RW | T | TT | ta | tb | W | z | |||||||||||||||||
| CY1L6 | 40 | 3.5 | 6 | M4 x 0.7 | 11 | 30 | 24 | M8 × 1.0 | 24 | 40 | 60 | 54 | 20 | 12 | 10 | 16 | 56 | 68 | |||||||||||||||||||
| CY1L10 | 68 | 4.3 | 8 | M4 x 0.7 | 10.5 | 27 | 19 | M8 × 1.0 | 30 | 60 | 80 | 85 | 26 | 17.5 | 12.5 | 20.5 | 0.5 | 1.0 | 77 | 103 | |||||||||||||||||
| Model | A | B | C | D | d | EA | EB | FA | FB | G | GP | H | HA | HB | HG | HI | HO | HP | HS | HT | J | JK | L | LD |
| CY1L15 | 7.5 | 9.5 | 5 | 16.6 | 12 | 6 | 13 | 3 | 6 | 6.5 | 65 | 40 | 6.5 | 4 | 16 | 14 | 38 | 39 | 25 | 16 | M6 × 1.0 | 9.5 | 75 | 5.6 |
| CY1L20 | 9.5 | 9.5 | 5.2 | 21.6 | 16 | 8.5 | 80 | 46 | 9 | 10 | 18 | 16 | 44 | 45 | 31 | 20 | M6 × 1.0 | 10 | 86 | 5.6 | ||||
| CY1L25 | 9.5 | 11 | 6.5 | 26.4 | 16 | 8 | 14 | 4 | 7 | 8.5 | 90 | 54 | 9 | 18 | 23 | 21 | 52 | 53 | 39 | 20 | M8 x 1.25 | 10 | 86 | 7 |
| CY1L32 | 10.5 | 14 | 8 | 33.6 | 20 | 8 | 16 | 5 | 7 | 9.5 | 110 | 66 | 12 | 26.5 | 26.5 | 24.5 | 64 | 64 | 47.5 | 25 | M10 x 1.5 | 15 | 100 | 9.2 |
| CY1L40 | 11.5 | 14 | 8 | 41.6 | 25 | 10 | 20 | 5 | 10 | 10.5 | 130 | 78 | 12 | 35 | 30.5 | 28.5 | 76 | 74 | 56 | 30 | M10 x 1.5 | 15 | 136 | 9.2 |
| Model | M | MM | (N) | (NA) | (NB) | NN | P | PA* | PB | PW | Q | QW | RW | T | ta | tb | TT | W | Z | Shock absorber |
| CY1L15 | 8 | M5 × 0.8 | 8.5 | 27 | 17 | M8 × 1.0 | M5 × 0.8 | 45 | 70 | 95 | 90 | 30 | 15 | 12.5 | 0.5 | 1.0 | 22.5 | 92 | 112 | RB0805 |
| CY1L20 | 10 | M6 x 1.0 | 10.5 | 29 | 20 | M10 x 1.0 | Rc 1/8 | 50 | 90 | 120 | 105 | 40 | 28 | 16.5 | 25.5 | 117 | 130 | RB1006 | ||
| CY1L25 | 10 | M6 x 1.0 | 12.5 | 49 | 40 | M14 × 1.5 | Rc 1/8 | 60 | 100 | 130 | 105 | 50 | 22 | 16.5 | 0.5 | 1.0 | 25.5 | 127 | 130 | RB1411 |
| CY1L32 | 12 | M8 × 1.25 | 13.5 | 52 | 42 | M20 × 1.5 | Rc 1/8 | 70 | 120 | 160 | 121 | 60 | 33 | 18.5 | 0.5 | 1.0 | 28.5 | 157 | 149 | RB2015 |
| CY1L40 | 12 | M8 × 1.25 | 12.5 | 51 | 36 | M20 x 1.5 | Rc 1/4 | 90 | 140 | 190 | 159 | 84 | 35 | 20.5 | 1.0 | 1.0 | 35.5 | 187 | 194 |
| Specifications | |||||||||
| Bore size (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | 50 | 63 |
| Fluid | Air | ||||||||
| Proof pressure | 1.05 MPa | ||||||||
| Max. operating pressure | 0.7 MPa | ||||||||
| Min. operating pressure | 0.16 | 0.16 | 0.16 | 0.16 | 0.15 | 0.14 | 0.12 | 0.12 | 0.12 |
| Ambient and fluid temperature | -10 to 60°℃ (No freezing) | ||||||||
| Piston speed | 50 to 500 mm/s | ||||||||
| Cushion | Rubber bumper | ||||||||
| Lubrication | Not required (Non-lube) | ||||||||
| Stroke length tolerance (mm) | 0 to 250 st: $^ { + 1 . 0 } _ { 0 }$ , 251 to 1000 st: $^ { + 1 . 4 } _ { 0 } ,$ 1001 st to: $^ { + 1 . 8 } _ { 0 }$ | ||||||||
| Mounting orientation | Horizontal, Inclined, Vertical Note) | ||||||||
| Mounting nut (2 pcs.) | Standard equipment (accessory) | ||||||||
| Magnet holding force (N) | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 | 1471 | 2256 |
| Stroke | ||
| Bore size(mm) | Standard stroke (mm) | Maximum availablestroke (mm) |
| 6 | 50, 100, 150,200 | 300 |
| 10 | 50, 100, 150, 200, 250, 300 | 500 |
| 15 | 50, 100, 150, 200, 250, 300, 350, 400, 450, 500 | 1000 |
| 20 | 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,700,800 | 1500 |
| 25 | 3000 | |
| 32 | ||
| 40 | 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,700, 800, 900, 1000 | 3000 |
| 50 | 5000 | |
| 63 | ||
| Bore size | |
| 6 | 6mm |
| 10 | 10mm |
| 15 | 15mm |
| 20 | 20mm |
| 25 | 25mm |
| 32 | 32mm |
| 40 | 40mm |
| 50 | 50mm |
| 63 | 63mm |
| Symbol | Type | Bore size |
| Nil | M thread | 6,10,15 |
| Rc | 20,25,32, 4050,63 | |
| TN | NPT | |
| TF | G |
Overall dimensions (mm)
CY3B6 to 63
| Model | A | B | C | CC | D | E | F | G | H | J | K | L | MM | N | NA | NN | Q | R | S | T | V | |
| CY3B6 | 4 | 17 | 8* | 7.6 | 4 | 8* | 5 | 13.5* | 4.5 | 5 | 35 | M3 x 0.5 | 9.5* | 10* | M6x1* | 62* | 6.5 | |||||
| CY3B10 | 4 | 25 | 14 | 12 | 1.5 | 9 | 5 | 12.5 | 4.5 | 4 | 38 | M3 x 0.5 | 11 | 14 | M10 x 1 | 63 | 7.5 | |||||
| CY3B15 | 4 | 35 | 14 | 16.6* | 2 | 10 | 5.5 | 13 | 6 | 11 | 57 | M4 x 0.7 | 11 | 17 | M10 x 1 | 83 | 8 | |||||
| CY3B20 | 8 | 36 | 26 | 21.6* | 2* | 13 | 7.5* | 20 | 28 | 6 | 8 | 66 | M4 x 0.7 | 18* | 24 | M20 x 1.5 | 12* | 106 | 10 | |||
| CY3B25 | 8 | 46 | 32 | 26.4* | 2* | 13 | 7.5* | 20.5 | 34 | 8 | 10 | 70 | M5 × 0.8 | 18.5* | 30 | M26 × 1.5 | 15* | 111 | 10 | _ | ||
| CY3B32 | 8 | 60 | 32 | 33.6* | 2* | 16 | 8* | 22 | 40 | 8 | 15 | 80 | M6x 1 | 20* | 36 | M26 x 1.5 | 18* | 124 | 13 | _ | ||
| CY3B40 | 10 | 70 | 41 | 41.6* | 3* | 16 | 11 | 29 | 50 | 10 | 16 | 92 | M6 x 1 | 26* | 46 | M32 x 2 | 23* | 150 | 13 | _ | ||
| CY3B50 | 86 | _ | 32 | 52.4* | 8 | 2 | 14 | 33 | 58* | 12 | 25 | 110 | M8 x 1.25 | 25 | 55 | _ | 30 -0037 | 27.5* | 176 | _ | M8 x 1.25 | |
| CY3B63 | 100 | 38 | 65.4* | 8 | 2 | 14 | 33 | 72* | 12 | 26 | 122 | M8 x 1.25 | 25 | 69 | 32 | -07-00.00 | 34.5* | 188 | _ | M10 x 1.5 |
| Model | W | X | Y | ZZ | P (Piping port) | ||
| Nil | TN* | TF* | |||||
| CY3B6 | 25 | 10 | 一 | 78* | M3 x 0.5* | 一 | 一 |
| CY3B10 | 30 | 16 | 81 | M5 x 0.8 | 1 | 1 | |
| CY3B15 | 35 | 19 | 103 | M5 x 0.8 | |||
| CY3B20 | 50 | 25 | 132 | Rc 1/8 | NPT 1/8 | G 1/8 | |
| CY3B25 | 50 | 30 | 137 | Rc 1/8 | NPT 1/8 | G 1/8 | |
| CY3B32 | 50 | 40 | 156 | Rc 1/8 | NPT 1/8 | G 1/8 | |
| CY3B40 | 60 | 40 | 一 | 182 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3B50 | 60 | 60 | 16 | 180 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3B63 | 70 | 70 | 16 | 192 | Rc 1/4 | NPT 1/4 | G 1/4 |
Note 3) Mounting nuts can be screwed on only for the effective thread length of the head cover (T dimension). When mounting a cylinder, consider the thickness of flange, etc.
| Part no. | Applicable bore size (mm) | d | H | B | C |
| SNJ-006B | 6 | M6 x 1.0 | 4 | 8 | 9.2 |
| SNJ-016B | 10,15 | M10 x 1.0 | 4 | 14 | 16.2 |
| SN-020B | 20 | M20 x 1.5 | 8 | 26 | 30 |
| SN-032B | 25,32 | M26 x 1.5 | 8 | 32 | 37 |
| SN-040B | 40 | M32 x 2.0 | 10 | 41 | 47.3 |
| Specifications | |||||||||
| Bore size (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | 50 | 63 |
| Fluid | Air | ||||||||
| Proof pressure | 1.05 MPa | ||||||||
| Max. operating pressure | 0.7 MPa | ||||||||
| Min. operating pressure | 0.16 | 0.16 | 0.16 | 0.16 | 0.15 | 0.14 | 0.12 | 0.12 | 0.12 |
| Ambient and fluid temperature | -10 to 60°℃ (No freezing) | ||||||||
| Piston speed | 50 to 500 mm/s | ||||||||
| Cushion | Rubber bumper | ||||||||
| Lubrication | Not required (Non-lube) | ||||||||
| Stroke length tolerance (mm) | 0 to 250 st:: +10, 251 to 1000 st: +1.80 | ||||||||
| Mounting | Direct mount type | ||||||||
| Mounting orientation | Horizontal, Inclined, Vertical Note 2) | ||||||||
| Magnet holding force (N) | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 | 1471 | 2256 |
| Stroke | |||
| Bore size(mm) | Standard stroke (mm) | Max. strokewithout switch (mm) | Max. strokewith switch (mm) |
| 6 | 50, 100, 150, 200 | 300 | 300 |
| 10 | 50, 100, 150, 200, 250, 300 | 500 | 500 |
| 15 | 50, 100, 150, 200, 250, 300350, 400, 450, 500 | 1000 | 750 |
| 20 | 100, 150, 200, 250, 300, 350400, 450, 500, 600, 700, 800 | 1500 | 1000 |
| 25 | 1200 | ||
| 32 | 2000 | 1500 | |
| 40 | 100, 150, 200, 250, 300, 350400, 450, 500, 600, 700, 800900,1000 | ||
| 50 | |||
| 63 | |||
How to Order
Direct mount type
| Nil | Standard type |
| G | Centralized piping type |
\*Type G (centralized piping) is not available for ø6.
Made to Order Refer to page 1187 for details.
| Nil | 2 pcs. |
| S | 1 ps, |
| n | "n" pcs. |
| 6 | 6 mm |
| 10 | 10 mm |
| 15 | 15 mm |
| 20 | 20 mm |
| 25 | 25 mm |
| 32 | 32 mm |
| 40 | 40 mm |
| 50 | 50 mm |
| 63 | 63 mm |
| Symbol | Type | Bore size |
| Nil | M thread | 6,10,15 |
| Rc | 20,25,32,4050,63 | |
| TN | NPT | |
| TF | G |
| Nil | 06 to ø15ø25 to ø63 | Without auto switch(Built-in magnet) |
| 020 | Without auto switch(Built-in magnet for reed switch) | |
| M | Without auto switch(Built-in magnet for solid state switch) |
| Nil | With switch rail |
| N | Without switch rail |
(mm)
Overall dimensions (mm)
Both sides piping type: ø6 to ø63
Note) This figure shows types with switch rail (Nil).
| Model | A | B | C | CB | CR | D | F | G | GP | GW | H | HA | HB | HC | HP | HR | HS | HT | JxE | K |
| CY3R6 | 7* | * | 一* | 2 | 0.5 | 7.6 | 5.5 | 3* | 20 | 18.5 | 19 | 17 | 10.5 | 18 | 10.5* | 17 | 6 | 10.5* | M4 x 0.7 x 6 | 7 |
| CY3R10 | 9 | 6.5 | 3.2 | 2 | 0.5 | 12 | 6.5 | 4 | 27 | 25.5 | 26 | 24 | 14 | 25 | 14 | 24 | 5 | 14 | M4 x 0.7 x 6 | 9 |
| CY3R15 | 10.5 | 8 | 4.2 | 2 | 0.5 | 16.6* | 8 | 5 | 33 | 31.5 | 32 | 30 | 17 | 31 | 17 | 30 | 8.5 | 17 | M5 x 0.8 x 7 | 14 |
| CY3R20 | 9 | 9.5 | 5.2 | 3 | 1 | 21.6* | 9 | 6 | 39 | 37.5 | 39 | 36 | 21 | 38 | 24 | 36 | 7.5 | 24 | M6×1X 8 | 11 |
| CY3R25 | 8.5 | 9.5 | 5.2 | 3 | 1 | 26.4* | 8.5 | 6 | 44 | 42.5 | 44 | 41 | 23.5 | 43 | 23.5 | 41 | 6.5 | 23.5 | M6 X1X 8 | 15 |
| CY3R32 | 10.5 | 11 | 6.5 | 3 | 1.5 | 33.6* | 10.5 | 7 | 55 | 53.5 | 55 | 52 | 29 | 54 | 29 | 51 | 7 | 29 | M8 x 1.25 x 10 | 13 |
| CY3R40 | 10 | 11 | 6.5 | 5 | 2 | 41.6* | 13 | 7 | 65 | 63.5 | 67 | 62 | 36 | 66 | 36 | 62 | 8 | 36 | M8 x 1.25 x 10 | 15 |
| CY3R50 | 14 | 14 | 8.2 | 5 | 2 | 52.4* | 17 | 8.5 | 83 | 81.5 | 85 | 80 | 45 | 84 | 45 | 80 | 9 | 45 | M10 x 1.5 x 15 | 25 |
| CY3R63 | 15 | 14 | 8.2 | 5 | 3 | 65.4* | 18 | 8.5 | 95 | 93.5 | 97 | 92 | 51 | 96 | 51 | 90 | 9.5 | 51 | M10 x 1.5 x 15 | 24 |
| Model | L | LD | M | MM | N | PW | Q | QW | T | TC | W | WP | WS | x | Y | Z |
| CY3R6 | 34 | 3.5 | 3.5 | M3 x 0.5 | 3.5 | 19 | 60* | 10 | 14.5* | 10.5 | 20 | 9.5 | 6 | 10 | 35.5 | 66* |
| CY3R10 | 38 | 3.5 | 4 | M3 x 0.5 | 4.5 | 26 | 68 | 14 | 17.5 | 14 | 20 | 13 | 8 | 15 | 39.5 | 76 |
| CY3R15 | 53 | 4.3 | 5 | M4 x 0.7 | 6 | 32 | 84 | 18 | 19 | 17 | 25 | 16 | 7 | 18 | 54.5 | 94 |
| CY3R20 | 62 | 5.4 | 5 | M4 x 0.7 | 7 | 38 | 95 | 17 | 20.5 | 20 | 40 | 19 | 7 | 22 | 64 | 107 |
| CY3R25 | 70 | 5.4 | 6 | M5 x 0.8 | 6.5 | 43 | 105 | 20 | 21.5 | 22.5 | 40 | 21.5 | 7 | 28 | 72 | 117 |
| CY3R32 | 76 | 7 | 7 | M6 × 1 | 8.5 | 54 | 116 | 26 | 24 | 28 | 50 | 27 | 7 | 35 | 79 | 130 |
| CY3R40 | 90 | 7 | 8 | M6 x 1 | 11 | 64 | 134 | 34 | 26 | 33 | 60 | 32 | 7 | 40 | 93 | 148 |
| CY3R50 | 110 | 8.6 | 10 | M8 x 1.25 | 15 | 82 | 159 | 48 | 30 | 42 | 60 | 41 | 10 | 50 | 113 | 176 |
| CY3R63 | 118 | 8.6 | 10 | M8 x 1.25 | 16 | 94 | 171 | 60 | 32 | 48 | 70 | 47 | 10 | 60 | 121 | 188 |
| Model | P (Piping port) | ||
| Nil | TN米 | TF* | |
| CY3R6 | M3 x 0.5* | 一 | 一 |
| CY3R10 | M5 x 0.8 | 一 | 一 |
| CY3R15 | M5 x 0.8 | 一 | |
| CY3R20 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3R25 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3R32 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3R40 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3R50 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3R63 | Rc 1/4 | NPT 1/4 | G 1/4 |
Overall dimensions (mm)
Centralized piping type: ø10 to ø63
| Model | B | C | CB | CR | D | F | G | GP | GW | H | HA | HB | HC | HP | HR | HS | HT | Jx E | K | L |
| CY3RG10 | 6.5 | 3.2 | 2 | 0.5 | 12 | 6.5 | 4 | 27 | 25.5 | 26 | 24 | 14 | 25 | 24 | 5 | M4 x 0.7 x 6 | 9 | 38 | ||
| CY3RG15 | 8 | 4.2 | 2 | 0.5 | 16.6* | 8 | 5 | 33 | 31.5 | 32 | 30 | 17 | 31 | 30 | 8.5 | M5 x 0.8 x 7 | 14 | 53 | ||
| CY3RG20 | 9.5 | 5.2 | 3 | 1 | 21.6* | 9 | 6 | 39 | 37.5 | 39 | 36 | 21 | 38 | 11 | 36 | 7.5 | 28 | M6 x 1x 8 | 11 | 62 |
| CY3RG25 | 9.5 | 5.2 | 3 | 1 | 26.4* | 8.5 | 6 | 44 | 42.5 | 44 | 41 | 23.5 | 43 | 14.5 | 41 | 6.5 | 33.5 | M6 x 1x 8 | 15 | 70 |
| CY3RG32 | 11 | 6.5 | 3 | 1.5 | 33.6* | 10.5 | 7 | 55 | 53.5 | 55 | 52 | 29 | 54 | 20 | 51 | 7 | 41 | M8 x 1.25 x 10 | 13 | 76 |
| CY3RG40 | 11 | 6.5 | 5 | 2 | 41.6* | 13 | 7 | 65 | 63.5 | 67 | 62 | 36 | 66 | 25 | 62 | 8 | 50 | M8 x 1.25 x 10 | 15 | 90 |
| CY3RG50 | 14 | 8.2 | 5 | 2 | 52.4* | 17 | 8.5 | 83 | 81.5 | 85 | 80 | 45 | 84 | 32 | 80 | 9 | 56 | M10 x 1.5 x 15 | 25 | 110 |
| CY3RG63 | 14 | 8.2 | 5 | 3 | 65.4* | 18 | 8.5 | 95 | 93.5 | 97 | 92 | 51 | 96 | 35 | 90 | 9.5 | 63.5 | M10 x 1.5 x 15 | 24 | 118 |
| Model | LD | M | MM | N | PW | Q | QW | T | TC | W | WP | WS | X | Y | Z |
| CY3RG10 | 3.5 | 4 | M3 x 0.5 | 4.5 | 26 | 68 | 14 | 17.5 | 14 | 20 | 13 | 8 | 15 | 39.5 | 76 |
| CY3RG15 | 4.3 | 5 | M4 x 0.7 | 6 | 32 | 84 | 18 | 19 | 17 | 25 | 16 | 7 | 18 | 54.5 | 94 |
| CY3RG20 | 5.4 | 5 | M4 x 0.7 | 7 | 38 | 95 | 17 | 20.5 | 20 | 40 | 19 | 7 | 22 | 64 | 107 |
| CY3RG25 | 5.4 | 6 | M5 x 0.8 | 6.5 | 43 | 105 | 20 | 21.5 | 22.5 | 40 | 21.5 | 7 | 28 | 72 | 117 |
| CY3RG32 | 7 | 7 | M6 × 1 | 8.5 | 54 | 116 | 26 | 24 | 28 | 50 | 27 | 7 | 35 | 79 | 130 |
| CY3RG40 | 7 | 8 | M6 × 1 | 11 | 64 | 134 | 34 | 26 | 33 | 60 | 32 | 7 | 40 | 93 | 148 |
| CY3RG50 | 8.6 | 10 | M8 x 1.25 | 15 | 82 | 159 | 48 | 30 | 42 | 60 | 41 | 10 | 50 | 113 | 176 |
| CY3RG63 | 8.6 | 10 | M8 x 1.25 | 16 | 94 | 171 | 60 | 32 | 48 | 70 | 47 | 10 | 60 | 121 | 188 |
| Model | P (Piping port) | ||
| Nil | TN* | TF* | |
| CY3RG10 | M5 x 0.8 | 一 | 一 |
| CY3RG15 | M5 x 0.8 | ||
| CY3RG20 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3RG25 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3RG32 | Rc 1/8 | NPT 1/8 | G 1/8 |
| CY3RG40 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3RG50 | Rc 1/4 | NPT 1/4 | G 1/4 |
| CY3RG63 | Rc 1/4 | NPT 1/4 | G 1/4 |
上海阮隆工业自动化电器有限公司
Shanghai china Ruan Long Industrial Automation Appliance co.,Ltd.
021-63720218 13801836216
xinglaizhang@yolon.com.cn
www.yolon.com.cn
