该页无缩略图
PROFESSIONALWELDING &CUTTINGSOLUTIONS
DrivenbyInnovation.BuiltforPerformance.
COMPANYOVERVIEW
FoundedinZongshanChinaDRisrofessoalacturerseializinginrteredingdinipnt Withadvancedmanfacturingfaclitietrongesearchndevelopmentcapabilitiesandomprehensiveualitymaagemet system,WoDERhasestablisheditselfasatrustedsupplierforcustomersworldwide.
Ourproduct portfolio includes:
·MMA (Stick)Welders
·MIG/MAGWelders
·TIGWelders
·Plasma Cutting Systems
·Multi-ProcessWeldingSystems
·WeldingAccessories
WODERproductsarewidely used in:
·MetalFabrication
·Construction
·Shipbuilding
·AutomotiveManufacturing
·Pipeline Installation
·Maintenance&Repair
·IndustrialManufacturing
Drivenbyinnovationandcustomer-focusedserviceWoDERcontinuouslydevelopsreliableandcostefectivesolutionsto meettheevolvingneedsof globalweldingprofessionals.
HOWTOCHOOSETHERIGHTWELDINGPROCESS
Selecting the right welding process depends on the material type,working environment, productivity requirements,and desired weld quality.
| Metal Type | MMA Stick | MIG | FCAW | AC-TIG | DC-TIG | Plasma |
| STEEL | ★ | ★ | ★ | ★ | ★ | |
| STAINLESSSTEEL | ★ | ★ | ★ | ★ | ★ | |
| NICKLE ALLOYS | ★ | ★ | ★ | ★ | ||
| ALUMINIUM | ★ | ★ | ★ | |||
| CASTIRON | ★ | ★ | ||||
| COPPERBRASS | ★ | ★ | ★ | |||
| TITANIUM | ★ | ★ | ||||
| MAGNESIUMALLOYS | ★ | ★ | ||||
| ALLELECTRICALLYCONDUCTIVE | ★ | |||||
| SKILL LEVEL | MODERATE | LOW | LOW | HIGH | HIGH | LOW |
| Welding Process | Cuttings | |||||
Finding the welding equipment that's right for you,Follow the steps below.
1.Pick the right process for the metals to be welded or Cutted.
MIG (GMAW)
S SS NiALCB
■Easiest process to learn
■High welding speeds possible
■Provide better control on thinner metals
■Cleaner welds possible with no slag
■Same equipment can be used for fluxed-cored welding
Flux-cored (FCAW)
sss
■Can work as wellas stick on dirty rusty material ■ Out-of-postion welding ■Deep penetration for welding thick sections ■Increased metal deposition rate
Pulsed MIG (GMAW-P)
SS Ni AL CB
■Flexibility and productivity-nearly all metals can be welded in all positions
■Larger dismeter elecrode wires for higher deposition rates
■Virtually no spatter
Welds thin to thick metals
Stick (SMAW) S SSNiCI ■Well suited for windy,outdoor conditions ■More forgiving when welding on dirty or rusty metal
TIG (GTAW)
ACALMg DC S SS Ni CB Ti
■Provides highest quality and most precise welds
■ Highly aesthetic weld beads
■Allows adjustment of heat input while welding by use of remot control
PulsedTIG (GTAW)
AC ALMg DC S SS NiCBTi
■More control on thin metals ■Less heat distortion on thin metals
Plasma ARC (PAC) Cutting and Couging * S SSNiALCBCITiMgEc
■Use with any electricaly conductive metals
■Small and precise cut
■Small heat-afected zone which helps prevent warp or paint damage.
DCINVERTERMMAWELDERSYSTEMS Reliable StickWeldingSolutions for
ARC Series Function:MMA/CEL/TIG
| MODEL | ARC/MMA-120 |
| Rated input voltage/Frequency | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 5.1 |
| Rated Input Power(kVA) | 23.2 |
| Rated output current (A) | 120A/23.19V |
| Output curent range(A) | 20-120 |
| Dutycyclef(%) | 30 |
| No-load voltage(V) | 60 |
| Eficiency(%) | 80 |
| power factor | 0.93 |
| Protectcass | IP21S |
| Insulation class | F |
| Cooling Method | air cooling |
| Usable electrode(mm) | 1.0-2.5 |
| Dimension(CM) N.W. (KG) | 27.5*12*23.5 |
| 2.7 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
Built with advanced IGBT inverter technology, WODER professional MMA welding systems provide superior arc stability, improved welding performance, and enhanced energy efficiency. 7 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
Hot Start Function Arc Force Control Anti-Stick Protection Stable Arc Performance Excellent Penetration High Duty Cycle Industrial-Grade Reliability
CT 8.8.8 m ①
TIG
HOT START ANTISTICK具%
ARC FORCE VRD加
| MODEL | ARC/MMA-140 | ARC/MMA-160 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 6.1 | 7.2 |
| Rated Input Power(kVA) | 27.7 | 32.7 |
| Rated output current (A) | 140A/25.6V | 160A/26.4V |
| Output curent range(A) | 20-140 | 20-160 |
| Dutycyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-3.2 | 1.0-3.2 |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| N.W. (KG) | 3.5 | 3.5 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
1 Built with advanced IGBT inverter technology, WODER professional MMA welding systems provide superior arc stability, improved welding performance,and enhanced energy efficiency. 1 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
Hot Start Function Arc Force Control Anti-Stick Protection ? Stable Arc Performance ? Excellent Penetration High Duty Cycle Industrial-Grade Reliability
一 8.8.8 T ①
TIG1
HOT START ANTISTICK
ARCFORCE VRD加
| MODEL | ARC/MMA-180 | ARC/MMA-200 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 8.4 | 9.6 |
| Rated Input Power(kVA) | 38.2 | 43.6 |
| Rated outputcurrent (A) | 180A/27.2V | 200A/28.8V |
| Output curent range(A) | 20-180 | 20-200 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-4.0 | 1.0-4.0 |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| N.W. (KG) | 3.8 | 3.8 |
ARC Series Professional Mma Welding Solutions
| MODEL | ARC/MMA-295 | ARC/MMA-315 |
| Rated input voltage/Frequency | AC 220/380±15% 50/60Hz | AC 220/380±15% 50/60Hz |
| Rated input capacity(KVA) | 6.2 | 7.2 |
| Rated Input Power(kVA) | 16.3 | 18.9 |
| Rated outputcurrent (A) | 140A/25.8V | 160A/26.4V |
| Output curent range(A) | 20-145/145 | 20-160/160 |
| Dutycyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protectcass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-3.2 | 1.0-3.5 |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| N.W. (KG) | 4.5 | 4.5 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
1 Built with advanced IGBT inverter technology, WODER professional MMA welding systems provide superior arc stability, improved welding performance, and enhanced energy efficiency. 1 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
Hot Start Function Arc Force Control ? Anti-Stick Protection ? Stable Arc Performance Excellent Penetration ? High Duty Cycle ? Industrial-Grade Reliability
Applications
品 将 1 Heavy Fabrication Steel Structures Equipment Manufacturing X 酒 年 MaintenanceServices Oil& Gas Pipeline Construction
CompleteWithMask&Accessories
C 8.8.8 nm ①
TIG1
HOT START ANTISTICKL
ARCFORCE VRD加
O
9
Welding Mask Brush & Hammer
Earth clamp and cable
Electrode holder and cable
| MODEL | ARC/MMA-320 | ARC/MMA-420 |
| Rated input voltage/Frequency | AC 220/380±15%50/60Hz | AC 220/380±15% 50/60Hz |
| Rated inputcapacity(KVA) | 9.6 | 11.4 |
| Rated Input Power(kVA) | 25.3 | 30.0 |
| Rated output current (A) | 180A/27.2 200A/28.8V | 200A/28.8230A/29.2V |
| Output curent range(A) | 20-180/200 | 20-200/230 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 70 | 70 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-4.0 | 1.0-4.0 |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| N.W. (KG) | 5.1 | 5.1 |
ARC Series Industrial Mma Welders
Power, Reliabilityand Productivity
Engineered for intensive industrial environments, WODER industrial MMA welders are designed to deliver stable performance under continuous heavy-duty operation.
Key Features
Advanced Digital Control System Wide Input Voltage Range Intelligent Cooling System ■High Efficiency Power Conversion Automatic Protection Functions Rugged Metal Housing
凯茶 宜
Shipbuilding Structural Steel Oil& Gas
m 8 %
Pipeline Construction Heavy Equipment Industrial Maintenance
Manufacturing
MMA 8.8.8
CEL Hz mm
TIG
HOT START ANTISTICK
ARCFORCE VRD
| MODEL | ARC/MMA-500 | ARC/MMA-600 |
| Rated input voltage/Frequency | AC380V±15%50/60Hz | AC380V±15%50/60Hz |
| Ratedinputcapacity(KVA) | 15.6 | 18.8 |
| Rated Input Power(kVA) | 23.7 | 28.6 |
| Rated outputcurrent (A) | 300A/32V | 350A/34V |
| Output curent range(A) | 20-300 | 20-350 |
| Dutycyclef(%) | 60 | 60 |
| No-load voltage(V) | 70 | 70 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-5.0 | 1.0-6.0 |
| Dimension(CM) | 40*23.1*337 | 40*23.1*337 |
| N.W. (KG) | 15 | 16 |
MULTI-PROCESSMIG WELDINGSYSTEMS
Versatile Solutions for Modern Fabrication
MIG welding isoneof themost productivewelding processesavailable today.
Itshighdepositionrate,easeofoperation,andexcellentwelding qualitymakeitidealformanufacturing fabrication,automotiverepair,andindustrialproduction.
WODERMIGweldingsystemscombineadvanced invertertechnologywith intelligentcontrolfunctions tomaximizeefficiencyandweldingperformance.
· MIG Welding
·Flux-Cored Welding
·Pulsed MIGWelding
·MMA Welding
·Lift TIG Welding
Advantages
·HigherProductivity
·Easier Operation
·LowerTrainingRequirements
· Consistent Weld Quality
·ReducedRework
MIG Series Multi-Process Welding Systems
| MODEL | MIG-135 |
| FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 4.2 |
| Rated output current (A) | 19 |
| Duty cyclef(%) | 35 |
| No-load voltage(V) | 60 |
| Output curent range(A) | 20-120 |
| Rated output voltage(V) | 13-21 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flow rate(L/MIN) | 8--18 |
| Torch cooling method | self cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class Cooling Method | F |
| Applicable welding wire diameter(mm) | air cooling |
| Dimension(CM) | 0.6-1.00 |
| N.W. (KG) | 32*16*27 |
| 3.5 |
MIGSeries
Multi-Process Welding Systems
Processes
| MODEL | MIG-140 | MIG-160 | MIG-180 | MIG-200 |
| FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 220±15%50/60Hz | AC 220±15%50/60Hz | AC 220±15%50/60Hz | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 5 | 5.7 | 6.6 | 7.7 |
| Rated output current (A) | 22.7 | 26 | 30 | 35 |
| Duty cyclef(%) | 35 | 60 | 60 | 60 |
| No-load voltage(v) | 60 | 60 | 60 | 60 |
| Output curent range(A) | 20-140 | 20-160 | 20-180 | 20-200 |
| Rated output voltage(V) | 13-26 | 13-26 | 13-26 | 13-26 |
| Eficiency(%) | 80 | 80 | 80 | 80 |
| Wire feed type | auto. | auto. | auto. | auto. |
| Gas flow rate(L/MIN) | 8-18 | 8-18 | 8--18 | 8--18 |
| Torch cooling method | air cooling | air cooling | air cooling | air cooling |
| power factor | 0.93 | 0.93 | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S | IP21S | IP21S |
| Insulation class | F | F | F | F |
| Cooling Method | air cooling | ai cooling | air cooling | air cooling |
| Applicable welding wire diameter(mm) | 0.6-1.00 | 0.6-1.00 | 0.6-1.00 | 0.6-1.00 |
| Dimension(CM) | 34*17.5*24 | 41.5*17.5*24 | 41.5*17.5*24 | 41.5*17.5*24 |
| N.W.(KG) | 6.7 | 6.8 | 7.2 | 7.2 |
MIG Series Pulsed Mig Welding Systems
AdvancedWeldingPerformance forProfessional Users
| MODEL | MIG-300 | MIG-315 |
| FLUX/MIG/MMA/LIFT TIG | MIG/PMIG/MMA/LIFT TIG | FMIG/PMIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 380±15%50/60Hz | AC 380±15%50/60Hz |
| Rated input capacity(KVA) | 13 | 13 |
| Rated output current (A) | 19.5 | 19.5 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 52 | 52 |
| Output curent range(A) | 30-300 | 30-315 |
| Rated output voltage(V) | 13-32 | 13-32 |
| Eficiency(%) | 80 | 80 |
| Wire feed type | auto. | auto. |
| Gas flowrate(L/MIN) | 8--20 | 8--20 |
| Torch cooling method | air cooling | air cooling |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Applicable welding wire diameter(mm) | 0.8-1.20 | 0.8-1.20 |
| Dimension(CM) | 59.4*31.4*51.9 | 59.4*31.4*51.9 |
| N.W. (KG) | 21 | 25 |
MIGSeries
Pulsed Mig Welding Systems
Advanced Welding Performance for Professional Users
Pulsed MIG technology provides superior arc control and significantly reduces spatter while maintaining excellent penetration.
■Ideal for applications requiring higher weld appearance standards and improved productivity.
KeyFeatures
Pulsed MIGProcess Synergic Programs Digital Parameter Adjustment Stable Arc Control Excellent Bead Appearance Reduced Heat Input
Applications
品
Stainless Steel Aluminum Fabrication Automotive Components Fabrication 1 □ 。 0
Precision Manufacturing High-End Fabrication Projects
MIG /% mm m/Min 888.888
LFTIG 中 1 1 2T MIX AR M.8 MM NO CO2 7 .6
SPOT GAS MM MM
O Pd Welding Mask Earth clamp and cable Electrode holder MIG Torch Brush & Hammer and cable 黄 ， 女 ！ THREE-PHASE MMA MIG/MAG BURNBACK GAS / NO GAS WIRE SPEED HEAVYY DUTY
| MODEL | MIG-350 |
| FLUX/MIG/MMA/LIFT TIG | MIG/PMIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC380V±15%50/60Hz |
| Rated input capacity(KVA) | 15 |
| Rated output current (A) | 23 |
| Duty cyclef(%) | 60 |
| No-load voltage(V) | 65 |
| Output curent range(A) | 30-350 |
| Rated output voltage(V) | 14-40 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flow rate(L/MIN) | 8--20 |
| Torch cooling method | air cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class | F |
| Cooling Method | air cooling |
| Applicable welding wire diameter(mm) Dimension(CM) | 0.8-1.20 |
| 58.7x31.2x55.05 | |
| N.W. (KG) | 26 |
MIGSeries Pulsed Mig Welding Systems
MIG 500P Function: FLUX/MIG/MMA/LIFTTIG/PMIG
Industrial Digital Pulsed MlG Welding System
Built for industrial fabrication environments, the MIG-5ooP delivers exceptional welding performance, productivity, and reliability.
Key Advantages
Advanced Pulsed MIG Technology Intelligent Digital Control High Duty Cycle Performance Excellent Arc Stability Reduced Welding Deformation Suitable for Continuous Operation
Recommended Industries
茶
Shipbuilding Pressure Vessel Structural Steel Manufacturing Fabrication ！ 面 1 品
Heavy Equipment Railway Equipment Industrial Construction
Manufacturing Production
CompleteWithMask&Accessories
| MODEL | MIG-500P |
| FLUX/MIG/MMA/LIFT TIG | MIG/PMIG/MMA/LIFT TIG |
| Ratedinputvoltage/Frequency | AC380V±15%50/60Hz |
| Rated input capacity(KVA) | 25 |
| Rated output current (A) | 38.5 |
| Duty cyclef(%) | 60 |
| No-load voltage(V) | 80 |
| Output curent range(A) | 30-500 |
| Rated output voltage(V) | 14-50 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flow rate(L/MIN) | 8--25 |
| Torch cooling method | air cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class | F |
| Cooling Method | water-cooling |
| Wire feeder dimensions(CM) | L*23*32 |
| Powersource dimensions(CM) | L*32.5*53.4 |
| Water cooler dimensions(CM) | L*32.5*25.3 |
| Applicable welding wire diameter(mm) | 0.8-1.60MM |
| Dimension(CM) | 65.00*32.5*115 |
| N.W. (KG) | 62 |
O m C Welding Mask Earth clamp and cable Electrode holder MIG Torch Brush & Hammer and cable
MIG mm m/Min PMIG 888.888
PLASMACUTTINGSYSTEMS
Fast.Precise.Efficient.
Plasma cutting isone of themost efficientmethods for cutting conductive metals. Byutilizing high-temperatureplasmaarctechnology,WoDERplasmacuttingsystemsdeliver fastcuttingspeeds,cleancutting edges,and exceptional operating efficiency. Designedforboth industrialandprofessionalapplications,WoDERplasmacuttersprovide reliableperformance for fabricationworkshops,maintenanceoperations,constructionprojects andmanufacturing facilities.
Advantages
·High Cutting Speed
·Smooth Cutting Edge
·ReducedMaterialDistortion
·Easy Operation
·LowMaintenance Requirements
·Excellent Cost Efficiency
Applications
·MetalFabrication
·Construction
·Automotive Repair
·Equipment Manufacturing
·Agricultural Machinery
·Industrial Maintenance
CUTSeries
CUTSeries
Industrial Plasma Cutting Solutions
Built for Productivityand Reliability
WODER industrial plasma cutting systems are engineered to deliver maximum productivity in demanding industrial environments. Designed for continuous operation, these machines provide precise cutting performance while maintaining exceptional durability and efficiency.
Key Benefits
Heavy-Duty Performance Industrial Duty Cycle Superior Cutting Quality Enhanced Cooling System ? Long Service Life ? Reduced Operating Costs
Recommended Industries
将 紅
Structural Steel Shipbuilding Pipeline Construction
Fabrication 8 酒
Heavy Equipment Industrial Metal Processing
Manufacturing Construction Facilities
GRID m/Min GASCHECK CONTINUOUS 8.8.8 PREGAS POST GAS INTERNAL 4T EXTERNAL
| MODEL | CUT-100 | CUT-120 |
| Rated input voltage/Frequency | AC 380±15%50/60Hz | AC 380±15%50/60Hz |
| Ratedinputcapacity(KVA) | 15.5 | 21.5 |
| Rated output current (A) | 23.5 | 32.5 |
| CUTOutput curent range(A) | 30-100 | 30-120 |
| MMA Output curent range(A) | 20-160 | 20-160 |
| no-load voltage(V) | 300 | 300 |
| Duty cyclef(%) | 60 | 60 |
| Thecutter Usesair pressure(Mpa) | 0.6-0.7 | 0.65-0.75 |
| Eficiency(%) | 80 | 80 |
| Max cutting thickness (MM) | 30 | 35 |
| Quality cuting thickness(MM) | 1--25 | 1--30 |
| Arc startingmethod | High-frequency non-contact | High-frequency non-contact |
| power factor | 0.93 | 0.93 |
| Protectcass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 61.3*31.2*60.05 | 61.3*31.2*60.05 |
| N.W. (KG) | 35 | 36 |
LGKSeries Industrial Plasma Cutting Solutions
Built for Productivityand Reliability ■WODER industrial plasma cuting systems are engineered to deliver maximum productivity in demanding industrial environments. ■Designed for continuous operation, these machines provide precise cutting performance while maintaining exceptional durability and efficiency.
Key Benefits
1 Heavy-Duty Performance Industrial Duty Cycle Superior Cutting Quality ? Enhanced Cooling System ■Long Service Life ? Reduced Operating Costs
Recommended Industries
将 超雨
Structural Steel Shipbuilding Pipeline Construction
Fabrication 8 酒
Heavy Equipment Industrial Metal Processing
Manufacturing Construction Facilities m/Min GAS CHECK GRID
CONTINUO 8.8.8 PRE GAS POST GAS INTERNAL 4 T EXTERNAL
| MODEL | LGK-80 |
| Rated input voltage/Frequency | AC 380±15% 50/60Hz |
| Rated input capacity(KVA) | 11.5 |
| Rated output current (A) | 17.5 |
| CUTOutput curent range(A) | 30-80 |
| MMA Output curent range(A) | 20-180 |
| no-load voltage(V) | 285 |
| Duty cyclef(%) | 60 |
| Thecutter usesair pressure(Mpa) | 0.55-0.65 |
| Eficiency(%) | 80 |
| Max cutting thickness(MM) | 25 |
| Quality cuting thickness(MM) | 1--20 |
| Arc startingmethod | High-frequencynon-contact |
| power factor | 0.93 |
| Protect cass | IP21S F |
| Insulation class | |
| Cooling Method | air cooling |
| Dimension(CM) | 58.7*31.2*55.05 |
| N.W.(KG) | 35 |
LGK Series
Industrial Plasma Cutting Solutions
Built for Productivityand Reliability
WODER industrial plasma cutting systems are engineered to deliver maximum productivity in demanding industrial environments. Designed for continuous operation, these machines provide precise cutting performance while maintaining exceptional durability and efficiency.
Key Benefits
? Heavy-Duty Performance Industrial Duty Cycle Superior Cutting Quality Enhanced Cooling System ? Long Service Life ? Reduced Operating Costs
Recommended Industries
将 红
Structural Steel Shipbuilding Pipeline Construction
Fabrication E 酒 1 。
Heavy Equipment Industrial Metal Processing
Manufacturing Construction Facilities
m/Min GAS CHECK 8.8.8 PREGAS POSTGAS INTERNAL 4 EXTERNAL
| MODEL | LGK-100 | LGK-120 |
| Rated input voltage/Frequency | AC 380±15%50/60Hz | AC 380±15% 50/60Hz |
| Rated input capacity(KVA) | 15.5 | 21.5 |
| Rated output current (A) | 23.5 | 32.5 |
| CUTOutput curent range(A) | 30-100 | 30-120 |
| MMA Output curent range(A) | 20-230 | 20-230 |
| no-load voltage(V) | 300 | 300 |
| Duty cyclef(%) | 60 | 60 |
| Thecuter usesair pressure(Mpa) | 0.6-0.7 | 0.65-0.75 |
| Eficiency(%) | 80 | 80 |
| Max cutting thickness (MM) | 30 | 35 |
| Quality cuting thickness (MM) | 1-25 | 1--30 |
| Arcstartingmethod | High-frequency non-contact | High-frequency non-contact |
| power factor | 0.93 IP21S | 0.93 |
| Protectcass | IP21S | |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 61.3x31.2x60.05 | 61.3x31.2x60.05 |
| N.W. (KG) | 45 | 46 |
DCINVERTERTIGWELDING SYSTEMS Precision Welding for High-Quality Applications
TIGwelding isthepreferred processwhensuperiorweldappearance,precision, andcontrolarerequired.
AlsoknownasGTAW(Gas TungstenArcWelding),TIGweldingemploysanon-consumable tungsten electrodeandshieldinggastoproduceultra-clean,slag-freeweldbeadswithminimalheatdistortion
Itiswidelyadoptedforhigh-standardweldingscenariosthatdemandexquisitefinishingandstrict workmanshiprequirements.
WODER DC inverter TIG welding machines integrate mature invertercontroltechnology,enabling ultra-fine currentadjustmentand stable arc ignition.
TIG Series
Function: DC/PULSE/COLD/MMA
Core Advantages
| MODEL | TIG-140 | TIG-160 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated inputcapacity(KVA) | 6.1 | 7.2 |
| Rated Input Power | 27.7 | 32.7 |
| Rated output current (A) | TIG26.7/MA:43.8 | TIG28/MMA:45.2 |
| Rated output voltage | TIG:16.4/MMA:25.6 | TIG:16.4/MMA:26.4 |
| Duty cyclef(%) | 60 | 60 |
| Output curent range(A) | 20-140 | 20-160 |
| no-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| powerfactor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| ungsten electrode specifications(mm) | 2.4 | 2.4 |
| N.W. (KG) | 3.5 | 3.5 |
TIG Series
| MODEL | TIG-180 | TIG-200 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated inputcapacity(KVA) | 8.4 | 9.6 |
| Rated Input Power | 38.2 | 43.6 |
| Rated output current (A) | TIG29.5/MMA:46.5 | TIG:34/MMA:46.5 |
| Rated output voltage | TIG:17.2/MMA:27.2 | TIG:18.2/MMA.27.2 |
| Duty cyclef(%) | 60 | 60 |
| Output curent range(A) | 20-180 | 20-200 |
| no-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| powerfactor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| ungsten electrode specifications(mm) | 3.2 | 3.2 |
| N.W. (KG) | 3.8 | 3.8 |
LaserWeldingMachine
Function:MIG/MMA/TIG
Technical Characteristics
Aircooled laser welder isa compact,low-maintenance,and highly portable solution ideal fo light to medium-duty welding tasks. It trades the ultimate power and continuous performance of water-cooled systems for superior convenience and operational simplicity Making ita perfect tool for jobshops,field service,and high-mix,low-volume precision manufacturing.
Capableofweldingwiderangeofmaterials
Carbon Steel
Stainless Steel
Copper
Aluminum
Applications
Easy operation:learn to use within 10 minutes
High welding efficiency.improve by2-10 times
High weld quality:no deformation,no welding scar and no grinding
Suitfor flat welding.fillet welding,vertical welding,
overlap welding and seal welding
Wide range of application:carbon steel,stainless steelaluminum,
galvanized sheet,etc
Energysaving,highefficiency
Fast adjustment of welding gun:power,scanning width and wire
feeding speed can be adjusted
| MODEL | WD-1200 | WD-1500 |
| Laser power | 1200W | 1500w |
| Laser type | Fiber laser | Fiber laser |
| Laser wavelength | 1080±5nm | 1080±5nm |
| Maximumweldingdepth | Stainlessstel/irons3mmaluminium≤3mm | Stainlessstel/irons5mmaluminiums5mm |
| Positioning mode | Red ight positioning.coper nozle | Red ight positioning.coper nozle |
| Coolingmode | Ai-cooling | Ai-cooling |
| Welding gap requirements | ≤1mm | ≤1mm |
| Total power | 35KW | 55KW |
| Electricity demand | 220V±10%50/60Hz | 220V±10%50/60Hz |
| Lengthof movableoptical fiber line | 8M | 8M |
| Welding mode | Weldingspeed | Welding quality | Auxiliarymaterials | Welding environment |
| Laser welding | Very fast | Well | Wire fling nedsSelf melting is not required | No specal requrements |
| TIG | Common | Common | Need | Need tungsten |
| MIG | Moderate | Common | Need | Need wire |
WHYWODER?
Driven by Innovation.Built for Performance.
ProfessionalWeldingEquipmentManufacturer
AdvancedManufacturingFacilities
Strong R&DCapability
StrictQualityControl
OEM&ODMExpertise
GlobalExportExperience
ReliableAfter-SalesSupport
W Ld
WODER
ProfessionalWelding&CuttingSolutions
GUANGDONGWODERWELDINGTECHNOLOGYCO.,LTD.
Address: Zhongshan,Guangdong,ChinaEmail:hushuigen@woder.com.cnHttp://www.woder.com.cn
C
Tel: 400-136-0616
