General

Founded in 2006,with 45 million USD turnover per year now,Farady Electric enjoys about 20 years experience in medium voltage section.FARADY Focus on Power transformer /Regulator/Switchgears manufacturing with KEMA/ASTA/ULcertification.

Workshop assembly line photos

General

FARADY developed its own brand pole mounted auto recloser with different functions in orderto full meet different clients'demand.

The vacuum switches are developed base on ACR type original switch.Its pursuit of high reliability,easy to maintain design concepts to create a generation of superior product, is the most reliable electric power system the best option.Different type of expanding switches is optional by client's requirement FARADY all series switches meet the following criteria:

Standard

ANSI/IEEEC37.60/IEC62271-100

ServiceCondition

a)Airtemperature:Maximumtemperature: + 7 0 ^ { \circ } \mathsf { C } ：Minimumtemperature: * 4 5 ^ { \circ } \mathsf { C } b)Humidity:Monthlyaverage humidity 9 5 % ；Dailyaveragehumidity 9 0 % c)Altitudeabovesealevel:Maximum installationaltitude: 2 5 0 0 { m } ormore higher. d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc. e) No frequentviolentshake.

33kV

ACRseriesRecloser

FAR11,FAR15,FAR27,FAR38,Its combined with vacuum interrupter,CT,6EVT,spring mechanismmagneticactuatormechanism,and with relayprotection function.

Farady strives to bring our customers the latest technology and competitive pricing and best service for distribution automatic.The FAR series automatic circuit reclosers can use on overhead distribution lines as well as distribution substation applications for all voltage classes 11kVup to 3 8 \mathsf { k V } at 5 0 / 6 0 \mathsf { H z } power system.and its rated current can reach 800A.

15kV

The FAR series automatic circuit reclosers integrates the functions of control, protection,measurement,communication,fault detection,on-line monitoring of closing or opening.

Offering

With optional classes for rated current range: For FAR15,with 800A,Breaking 12.5\~31.5kA.
For FAR27,with 800A,Breaking12.5\~31.5kA.
ForFAR38 with 800A,Breaking12.5\~31.5kA.
With optional relay protection curves for user choice: Instantaneousovercurrent protection.
Timing over-current protection.
Negative sequence over-current protection.
Directional over-current protection(\*).
Over-voltage protection.
Undervoltage protection.
With optional choice by locally or remotely.
With IEC/MODBUS/DNP3.0 communication protocol integrated to SCADA system.

Controller

Feature

Protection configuration is complete,and all protection functions can be switched on and off flexibly.

12 channels signal input.

4 channelscurrentmeasure.

8 channels voltage measure.

Large capacity flash memory can record at least 10o times of historical events,and no datawill losseventhe powerisoff

Circuits operating loop can be used both the direct or alternating current,selfadaptation open/close brake function,which can co-work with various of breakers,and the operation is simple and reliable.

The device has complete self-inspection function to in-service monitor the working conditions of various parts of the device,ensuring the reliability of the device.

Records

Trip logs SOElogs Alarm logs Operate count

Metering

Phase current IA,IB,IC RMS,residual current I0 Voltage Ua,Ub,Uc,Ur,Us,Ut, Uab,Ubc,Uca,UO(Customer optional) Active power,reactive powerand power factor Frequency

11kV

General

Pole-mounted load-break switch (Pole-LBS)applies up to 36 kV 400/630 A, 5 0 / 6 0 ~ { \mathsf { H z } } Pole-LBS associated with a Controller.This SF6 gas-insulated switch can corporate with the Distribution Automation System,and also isolate a faulted section of distribution line from the Control Center.

A simple pole mounting arrangement contribute to quick and low cost installation,and theswitchcan be operated manuallywith aelectronic controller Electronic controller is contained ina stainless steel cabinet for an all weather environmental conditions.Remote monitoring and control can also be Provided mounting wire or wireless Modem in a cabinet.lt shall be principal that this SF6 Gas Load Break Switch shall be used in the following service condition.

33kV

Standard

Every switch is factory filled,hermetically sealed and production tested according to IEC62271-103 prior to shipment.

Service Condition

a)Air temperature:Maximumtemperature: + 7 0 ^ { \circ } \mathsf C ;Minimum temperature: - 2 5 ^ { \circ } \mathsf { C } # b)Humidity:Monthlyaverage humidity 9 5 % ；Dailyaveragehumidity 90 % c)Altitude above sea level:Maximum installation altitude: 2 5 0 0 { m } or more higher. d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc. e)No frequent violent shake.

Features

·SF6 Gas Insulation

SF6 gas is a nontoxic.non flame able dielectric with excellent arc quenching property.

·Bushing Versatility

Inaddition to the standard porcelain bushing，a variety of options are available including silicon rubber/ porcelain bushing.

·Visible Open/Close

The color coded main contact position indicator(green-open,red closed）is easily visible from the ground.The indicator is connected directly to the main contact drive shaft assemblyassuringaccurate contact status.

·Quick Operation

Spring charged operator is being utilized compression spring to assure quick make and quick-break operation.(<1 Sec.)

·Remote Controllable

Electronic controller isavailable offering local operation RTU-interface for master station control.

·Robust Switch

The switch is manufactured from robust,corrosion resistant,proven materials to ensure long service life and also capable of a number of operations which is an ideal characteristic for pole-mounted equipment.

Descriptions

Note:Moreof thePole mounted gas insulated load break switch information can get from after communication with sale department

Outline Dimension

General

The Farady's new generation FCS capacitor switch is a special electrical field design on vacuum interrupter and switch body insulation for switching capacitive current integrated with single or three phase pole mounted capacitor bank to be reactive power compensation with long mechanical and electrical life design can provides an operational life of over 10,ooomaintenance-free operations.

Using the FCS will result in substantial savings from reduced maintenance and maximized bank uptime and will also improve Power Quality.

TheFCS all complywith relative standard ANSI/IEEE C37.66/IEC60071

Technicaldata

SalientFeatures-UnisafeCubicle

■The Unisafe cubicle is designed and type tested to meet requirements of IEC62271-
200&60694/1S:3427 ■Metal clad compartmentalised construction-all compartments are segregated from
each other ■with metal sheets ■IP4X degree of protection externally& IP5Xavailable as an option ■Internal arc tested ■Independentexhaust vents forall HTcompartments ■Internal earthing switch (optional) ■Small width panel \boldsymbol { * } 6 0 0 \mathsf {mm } up to 1250Abusbar rating ■The normal service performances are guaranteed under the following conditions -Min.Ambient Temp: - 5 ^ { \circ } C （204号 -Max.Ambient Temp: + 4 0 ^ { \circ } C （20 -Max.Relative Humidity: 9 5 % ■Insulation level of 9 5 \mathsf { k V } available on request ■Option of REF 5 4 2 + ,composite unit for protection,measurement,control,signaling,

interlock,automationand communication

Technicaldetails-Unisafecubicle

TF

General

VB4P-12

VB4/P medium-voltage indoor vacuum circuit breaker is applicable for three -phase AC power system of rated voltage up to 1 2 - 2 4 \kappa V and frequency50/6oHzwidely used in many fields such as power plant, transformer substation,petrol chemical industy，metallurgy. manuacturing industy.airport,residential area,etc,to control and protect the electric equipment,especially,Itis used for the occasion that nedsinfrequent operation atrated currentor multi-breaking short circuit current,may be mounted in the indoor arinsulatng switchgear like type K28 or AMS,ABB type S1series,etc.This circuit breaker is standards as GB1984-2003 AC high voltage circuit breaker,JB3855 3 . 6 \substack { - 4 0 . 5 \mathsf { k V } } indoor AC High voltage circuitbreaker,DL/T403 Specification of 12-40.5kV indoor High voltage vacuum circuitbreakerfororderaswellaslEC6o694.

This circuit breakeris made with mature APG technology.The application of VB4/P terminal buffer guarantees the indoor terminal is evermorereliable innayoperation environment VB4/P canfullymeet the requirementof GB,DL,IEC，DIN,VDEaswellas standardsofotheradvanced industrialcountries

Service Condition

a)Air temperature:Maximum temperature: + 4 0 ^ { \circ } \mathsf { C } ：Minimumtemperature: * 2 5 ^ { \circ } \mathsf { C } b)Humidity:Monthly average humidity 9 5 % ；Dailyaverage humidity 90 % ： c)Altitudeabovesealevel:Maximum installationaltitude: 2 5 0 0 { m } d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc. e)No frequent violent shake

VB4P-12

Main technical specifications

VB4/S

General

Responded to the international greenhouse gas(GHG） emission reduction and environment friendly target,Farady use uniform electric field technology self-healing dry air insulation technology，no SF6 of GHG and solid epoxy resin waste,Meet the social green low-carbon,environmental protection and energy-saving development trend.

Aironly series environmental protection gas insulated switchgear with compact size, performance stable and reliable,with self-healing ability.Eliminate the risk of insulation loss caused by leakage of SF6 inflatable pressure,and do not adopt the technical scheme of solid insulation with penetration insulation failure caused by local discharge and easy surface pollution flashoverand creepage.It isa new generation of compact environmental protection gas meets the requirements of vacuum technology,environmental gas insulation medium and minimum solid support.

Serviceenvironment

a)Airtemperature:Maximumtemperature: + 4 0 ^ { \circ } C ：Minimumtemperature: * 2 0 ^ { \circ } C b)Humidity:Monthlyaverage humidity 9 5 % ；Dailyaveragehumidity 90 % ： c)Altitude above sea level:Maximum installation altitude: 2 5 0 0 { m } d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc. e)No frequentviolent shake

Maintechnicalspecifications

General

FGRMU is a ring main unit for the secondary distribution network.FGRMU can be supplied in 10 diferent configurations suitable for most-switching applications in 12/24/36 kV distribution networks.Itis extendable and combined with the SafePlus concept,which is ABB's flexible，modular compact switchgear,they represent a complete solution for 12/24/36 kV secondary distribution networks.FGRMU and SafePlus have identical user interfaces.

FGRMU is a completely sealed system with a stainless steel tank containing allive parts and switching functions.A sealed steel tank with constant atmospheric conditions ensuresa high level of reliabilityaswellaspersonnel safetyanda virtuallymaintenancefree system.

The FGRMU concept offers a choice of either switch-fuse combination or circuitbreaker with relay for protection of the transformer,FGRMU can be supplied with an integrated remote control and monitoring unit.

This product is in conformity with the standards of IEC60420,GB/T11022,GB3804, Gb3906.

Service Condition

a)Air temperature:Maximum temperature: + 4 0 ^ { \circ } C Minimumtemperature 2 0 ^ { \circ } C b)Humidity:Monthlyaverage humidity 9 5 % ;Dailyaveragehumidity 90 % c)Altitudeabovesea level:Maximum installationaltitude: 2 5 0 0 \mathsf { m } ： d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc. e) No frequentviolentshake.

Standardcombinationand itsweight,dimension

Standard combinationand its weight,dimension

Note:we can provide with the RMU according to Special requirement order.

Standardinstruction

·D unit configuration
See standard configuration and features of'Cable connecting module without earth switch module'. ·C unit configuration
See standard configuration and features of'Load break switch module".
·F unit configuration
See standard configuration and features of'Load break switch and fuse combination module'. ·Vunit configuration
See standard configuration and features of'Vaccum switch module".

Standardcombinationsalso includesbelowingconfigurations

Vo Itage indicator ofincoming bushing capacitive character.
S F6 density/pressure monitor(gas meter)with each gas cell.
Ring for lifting.
Operating handle.

Maintechnicalspecifications

Note: For short circuit breaking and peak current is based on Fuse plus combination of F module.

General

This is a new generation of LV Pole Mounted Breaker developed by FARADY Electric in accordancewiththeFrenchmarket

This product uses air as the insulating medium,and adopts a knife contact and grid arc extinguishing structure.

Moreover,this product utilizes an integrated digital trip unit in conjunction with a load indicator to achieve the operating time compliant with the IEC6o947 standard and the cumulative overload tripping function.

Users can adjust the integrated digital trip unit as needed,with three power ratings available:50kVA,100kVA,and160kVA.

The external pointer of the load indicator serves dual purposes:displaying load status and allowing users to rotate it to set the required cumulative trip time.This pointer adjustment feature employs stepless adjustment,offering greater operational convenience.

Users can apply padlocksat the ground-level operating handle to prevent unauthorized personnel from operating the equipment,thereby ensuring power supply security.

Service Condition

Temperature: - 4 0 ^ { \circ } C ~ + 7 0 ^ { \circ } C
Humidity: 100 % （204号
Altitude: <= 2 0 0 0 \mathsf { m }
Wind speed: <= 4 0 \mathsf { m } / \mathsf { s } \bullet \mathsf { H } （204
Note:No fire,no explosion hazards,no chemical corrosion and recurrent severe
vibration

Technicalcharacteristics

Structure

1.Incoming wiring clamp
2.Incoming wiring hole
3.Arc chute grid
4.Operation mechanism
5.Digital trip unit
6.Load indicator
7.Load indicator trip indication
8.Position indicator
9.Operation handle
10.Load trip enable/disable handle

General

MCC LV withdrawable switchgear (hereinafter referred to as device) ismanufactured by standard module through consulting MNS series low voltage switch cabinet of Switzerland ABB Company，and synthetically improved.The device is applicable to the system with AC 5 0 H z ,rated working voltage 660vand below,used as control device for various power generation，transmission，distribution，power transfer and power consumption device.It is widely used in low voltage distribution system of various mining enterprise,tall building and hotel,municipal construction etc.Besides the general land use, after special disposal,it also can be used for marine petrol drilltaken platform and nuclear power station.The device accords with international standard IEC439-1 and national standard GB7251.1.

Service Condition

1.Ambient air temperature: - 5 - + 4 0 and the average temperature should not exceed +35in 24h. 2.Air condition:With clean air,Relative humidity should not exceed 5 0 % at + 4 0 . 1 Higher relative humidity isallowed at lower temperature. E \mathsf { x } . \mathsf { 9 0 % } at ^ { + 2 0 } .Butin view of the temperature change,it is possible that moderate dews willproduce casually. 3.Altitude above sea level shouldnot exceed2o00M. 4.The device is suitable to the transportation and store with following temperature:-25 ^ { + 5 5 } ,in short time (within 24h)it reaches + 7 0 .Under the limiting temperature,device should notsuffer damage that cant recover,and it can works normally under normal conditions. 5.If the above operating conditions not meet users demand.Consult with manufactory. 6.Technical agreement should be signed additionally if the device is used for marine petrol drill taken platform and nuclear power station.

Service Condition

General

GGDACLV fixed type switchgear isapplicable to the distributionsystem with AC 50Hz,rated working voltage 380v,rated current to 3150A below in power station,substation.plant enterprise etc., used forpowertransfer,distributionand controlforpower,lightinganddistributiondevices.The product hascharacteristics of high breaking capacity,fine dynamicand thermal stability,flexibleelectric project, convenient combination,beter serial practicability,novel structure and high protection grade etc.It accords with the standardslEC439 Low voltage complete switch device and control device and GB7251.1 Low voltage complete switch device etc.

Service Condition

1.Ambientair temperature: . 5 ~ + 4 0 and theaverage temperature should not exceed + 3 5 in 24h.
2.Installand use indoors.Altitude above sea level for operation site should not exceed 2000M.
3.Relative humidity should not exceed 5 0 % atmaxtemperature + 4 0 Higherrelativehumidityis allowedat lower temperature. E X . 9 0 % at + 2 0 .But in view of the temperature change,it is possible that moderate dews will produce casually.
4.Installation gradient not exceed 5.
5.lnstall in the places without fierce vibration and shock and the sites insuffcient to erode the electrical components.
6.Any specific requirement,consult with manufactory.

Maintechnical parameters

Interiorstructure

FaradyElectricCo.,Ltd