g chis magnificent entry way is exclusively earlworks!
g chis magnificent entry way is exclusively earlworks!
Installation of Hybrid-Resin products are as easy as
working with wood products. Why is that? Because all of
our Hybrid Mouldings are made from Maple Hardwood and
Resin. We are the only manufacturer in the world using this
blend of materials. Hybrid-Resin products are consistent in
their density without the knots, warping, or cupping that
make cutting wood sometimes difficult. Nailing, cutting
and gluing any of our products can be performed with all
STANDARD WOODWORKING TOOLS & GLUES.
GLUI G -When using PEARLWORKS resin products always use glue or adhesive for a permanent bond.
Most woodworking glues and adhesives will work with resin products. In 2007 Pearlworks started developing its own
line of Adhesives, Glazes and Finish Products. We are proud to announce these new items are now available!
All of our new products have been developed exclusively for Resin and Resin\/hybrid Products.
AILI G - Use only 23 gauge pneumatic nail guns when nailing PEARLWORKS resin components. Using larger
nails on polyester resin will cause parts to crack or shatter. Larger nail guns can be used for superflex mouldings and
on the wood portions of hybrid mouldings.
SCREWS - Larger components will need to be attached with screws. When using screws pre-drilling is required to
prevent cracking or splitting. Pearlworks recommends using square drive trim head screws. This type of wood screw has
a very small head which lessens the risk of a stress fracture. Remember always use a good adhesive when installing
Pearlworks products.
FILLI G -Any nail or screw holes can be filled with standard wood putty or Bondo. The use of 23 gauge nails
virtually eliminates the need to fill nail holes. Any gaps, cracks or joints in resin product installations can be filled the
same way as wood products with putty, caulk or our favorite bondo.
Pearlworks: The Industry Leader in Architectural Ornamentation has created a new line of custom
finishing products. Visit our finishing site at www.easyfauxfinishing.com
14251 Franklin Ave. Tustin. CA 92780
Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS
Website:www.pearlworksinc.com E-mail: info@pearlworksinc.com
GE ERAL CO DITIO S OF SALE
BUSI ESS HOURS: 7:30 AM to 4:00 PM Monday through Friday. Showroom hours are 7:30 AM to
4:00 PM. We are closed on all major holidays.
PRICI G: F.O.B. Tustin, CA 92780
$5.00 minimum handling charge on orders under $100.00
5% handling charge on orders above $100.00
ORDERS OVER: Discount Schedule:
$1,500 5% Discount
$3,500 7% Discount
$5,000 10% Discount
$15,000 13% Discount
$25,000 15% Discount
ORDERI G:
• All invoices, shipping agreements, and credit card authorization forms will be faxed directly to the
customer for their approval. Once approved and returned to Pearlworks, the order will then be processed.
• Due to constant product research and development, all product pricing and part numbers may change
without notice. The customer must review all part numbers, descriptions, and prices before approval.
• When ordering moulding, please allow 20% additional footage for pattern repeat. Some radius-moulding
orders will require a template with your order.
• All cancellations of orders that are in production will be subject to a service fee of $25.00, or 5% of the
total order (whichever is greater).
• Freight and handling charges on orders refused by the consignee will be charged to the buyer.
TERMS:
• Prepaid. No C.O.D’s
• 50% deposit on all approved orders with the balance due before shipping.
• Custom and special orders must be prepaid in full.
• All labor charges on custom pieces must be prepaid in full.
• All labor charges for completed custom work are non-refundable.
• All checks may be subject to a 7-day clearing period before product will be shipped.
SHIPPI G:
• If your order is in stock, it typically ships within 2-4 business days after your final approval. Large
orders will take longer.
• Orders are shipped via FEDEX ground or common carrier, depending on size and weight. Please
specify if priority shipping is desired.
• Requests for shipping cost cannot be accommodated until order is actually packaged.
• “Same Day Shipping” requests for priority shipments will be assessed a 25% surcharge. The request
must be approved by the customer in writing by 11:00 AM Pacific Standard Time.
RETUR S:
• Returns will be accepted until 180 days after delivery date.
• All returns must be approved by Pearlworks. We will issue a RMA return merchandise authorization
number to you. This number must be clearly written on the returning box or it will be refused.
• All returns must be in saleable condition.
• All shipping cost on returned products are the responsibility of the customer.
• All returns are subject to a restocking fee as per our restock fee schedule.
10% after 1-30 days
20% after 31-60 days
30% after 61-90 days
50% after 91-180 days
WARRA TY:
• If after careful inspection of your Pearlworks components, you feel there is a defect that renders a
part unusable, please notify us in writing within 48 hours of receiving your delivery.
• Finishing or installing a component infers that you have accepted same and nullifies any warranty
claim.
• Pearlworks liability shall not exceed the replacement cost of the defective part only, including shipping
and handling.
• All wood mouldings must be maintained under stable humidity and temperature conditions for any
warranty to apply.
• All flexible mouldings will split or crack if bent beyond our specified minimum radius limits.
• All sizes of parts in catalog are approximate. Example: If you are building columns to go with either of
our bases or plinth blocks, it is mandatory that you buy samples of these parts before you make any of
the columns. All resin ornamentation will vary slightly in size due to the delicate nature of the curing
process of resin. Please make sure all parts work together before placing your order.
• Some of our more delicate designs can be fragile, because of this we cannot guarantee that they will
arrive without a break or crack. Many factors such as extremely cold weather, physical shock to a
package, etc. may cause a crack or a “clean break” in the thinner areas of many of our components.
Typically, resin breaks smoothly and can easily be joined together with no visible seam appearance in
the finished product. Cracked material can also be easily re-attached. Components that may experience
a crack or break in transit (see example on next page) include any part that is less than ½ inch thick at
the thinnest point.
CLEA BREAK RESI REPAIR
This break at the end of a cartouche can easily be joined together with no seam
showing because, typically, resin components break with a clean separation.
This shows the same cartouche successfully glued together with no break showing
in the end application.
Some of our more delicate designs can be fragile, because of this we cannot guarantee
that they will arrive without a break or crack. Many factors such as extremely cold
weather, physical shock to a package, etc. may cause a crack or a “clean break” in the
thinner areas of many of our components. Typically, resin breaks smoothly and can
easily be joined together with no visible seam appearance in the finished product.
Cracked material can also be easily re-attached. Components that may experience a
crack or break in transit.
SHIPPI G A D WILL CALL AGREEME T
Our goal at Pearlworks is to assure that you receive your order complete and undamaged. Over the years we
have experienced almost every conceivable shipping problem imaginable. We have listed a few guidelines to
follow that will help, should you need to make any claims for damage or lost packages.
All ornamentation is sold to our customers F.O.B.; this stands for “freight on board”. This term simply means,
we guarantee all parts from defects or damage originating from our factory.
Our main challenge is shipping our ornamentation safely to our customers.
Pearlworks has a very competent shipping department that carefully packages and prepares your shipment.
For this service our customers pay a “handling charge”.
Once Pearlworks has packaged, sealed and safely delivered your packages to the shipping company,
our obligation to this order is complete.
Pearlworks is not in any way circumventing responsibility, but merely stating we cannot be held responsible for
replacement of parts damaged during transit, for which we have no control. We will assist our customers if they
need any help when dealing with shipping companies to the best of our abilities.
Please follow the listed suggestions; they are based on years of experience in dealing with shipping companies.
Step 1) When the shipper delivers your packages you will have to sign a release in order for you to obtain your
delivery. Please, immediately inspect the outside of your packages very carefully, looking for any scrapes,
smashed corners or edges, holes, ripped sides or any visible damage you can find. If you find damage to your
boxes note this with the shipper immediately before the driver leaves.
This will buy you time if you or the shipping company don’t have the time to open and check for damaged
parts.
If at all possible, open all packages in front of shipper at the time of delivery. If damage is found make a
detailed list and note this with the shipper. Do not throw away any of the packaging materials or the boxes.
The shipping company will need to inspect this before a claim can be processed.
Step 2) Make your claim for damage immediately with the shipping company; do not wait. The longer you
wait, the longer it will take for the shipping company to reimburse you for your claim. (Pearlworks is not
responsible for replacement of any part damaged during transit).
Step 3) If you sign your release form with the condition “subject to inspection”, this means nothing to the
shipping company. You need to inspect for damage if possible at the time of delivery. If all of these steps are
followed, the shipper will approve your claim for damage. Once we have approval from the shipping
company on your claim, we will immediately ship all replacement parts. If your claim is denied because you
forgot or did not follow the listed guidelines, you have eliminated our ability to help you. All replacement parts
for damage denied by the shipper will have to be reordered and paid by the customer.
FEDEX has a limit on the weight and size of each package. Anything larger must be shipped by
common carrier.
All long mouldings are packaged in custom-built boxes that are 15’ long. All mouldings are surrounded by
expandable foam. The handling charge for all orders is 5%.
All other parts are packaged in standard size boxes. The Minimum handling charge for orders under $100.00 is
$5.00 plus shipping.
Once orders are completed, the customer has 2 weeks to ship or pick up orders. All orders over 2 weeks old will
be charged a $15.00 holding and storage fee per week. Shipping cost is determined per shipment,
by package weight and distance to ship. If you would prefer to use your own carrier, or require NEXT DAY,
2ND DAY, or would like to WILL CALL your order, please notify us as early as possible.
Canadian orders are subject to customs\/broker charges please check with your local UPS or customs broker.
Any and all duty and tax charges are based on weight and value of the shipped product and are the consignee’s
responsibility to pay before any product can be released.
There is a 25% surcharge for same day shipping, “not all orders can be processed in one day”.
It is your responsibility to follow the above instructions. Please follow them in detail. If any of the above
suggestions are not followed, our ability to help will be severely limited.
If you choose not to wait for the damage claim to clear before you order replacement parts, let us know,
replacement orders are given priority. All replacement orders will be treated as a “NEW ORDER”, all standard
procedures and approvals will apply.
If you have any questions about the above information, please call Pearlworks immediately for clarification.
DAMAGED OR MISSI G GOODS
1. Pearlworks takes extreme measures to insure that every item you order is actually included in the shipment
and carefully packaged so that damage does not occur. Our boxes are custom made and we encase most
items in expandable foam to insure total protection.
2. If you notice any damage to a box shipped from Pearlworks or if you suspect that there may be an issue with
your shipment, you must do the following:
• note any damage on the carrier’s freight bill.
• open the box in the presence of the delivery person & make your claim immediately.
• keep the box, packing material & damaged parts for the carrier’s future inspection.
3. Because we use so much packing material to protect our product, it is easy to overlook a part when unpacking.
You must carefully go through all the packing material. If it seems that something might be missing, please
notify us immediately. Do not throw away either the box or the packing material if you believe that
something is missing or damaged.
4. Although claims for damaged components are to be made by you with the carrier, we will be happy to assist you
with your claim. Orders for replacement parts will be considered a new order.
All Ornamentation is Flexible, Stainable & Paintable. BASES
Pearlworks, Inc. 14251 Franklin Ave. Tustin, CA 92780
Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS
www.pearlworksinc.com
BASES Shown with: BASE-103T
BASE-100A $29.95 BASE-102 $34.95 BASE-103T $149.95
4-3\/4” x 3-3\/4” x 4-3\/4” 5” x 6-3\/4” x 4-1\/2” 9-3\/4” x 4-1\/2” x 8”
BASE-100B $34.95
6-1\/4” x 5” x 6-3\/4” BASE-103 $799.95
7-1\/4” x 37-3\/4” x 7”
BASE-100A BASE-102A
BASE-104 $249.95
9-1\/4” x 13-1\/2” x 4-3\/4”
Top: 7” x 4” Thick
Top View
BASE-102A BASE-102A $49.95 BASE-105 $29.95
8” x 4-3\/4” x 5-1\/4” 360º part (round)
2 4-3\/4” dia. x 5-3\/4”
* All sizes are approx.- max W” x max H” x Thickness”
BASES Outside Corner
BASE-109-O $24.95
Inside Corner 7” Height x 2-1\/4” Thick
BASE-109-I $24.95 Bottom: 3-1\/4” Wide
7-1\/4” Height x 2-1\/2” Thick
Bottom: 3-1\/2” Wide
BASE-109-I and BASE-109-O are specifically
designed to use with MLD-320.
Top View
BASE-110B $19.95 BASE-110B
5” x 5-1\/4” x 1-1\/4” * All sizes are approx.- max W” x max H” x Thickness”
Designed to use with
MLD-320
4
BASES BASES
Top View BASE-113AA $39.95 Top View
Top View Height: 5-1\/2”
Top View Top: 2-3\/4” dia. BASE-114AA $39.95
Bottom: 3-1\/4” dia. Height: 4-1\/4”
Top: 2-3\/4” dia.
Designed for “TAPERED” Bottom: 3-1\/4” dia.
COLM-103AA-TC
Designed for “TAPERED”
BASE-113A $49.95 COLM-103AA-TC
Height: 7”
Top: 3” dia. BASE-114A $44.95
Bottom: 4” dia. Height: 4-3\/4”
Top: 3” dia.
Designed for “TAPERED” Bottom: 4” dia.
COLM-103A-TC-60
Designed for “TAPERED”
BASE-113B $59.95 COLM-103A-TC-60”
Height: 8”
Top: 3-5\/8” dia. BASE-114B $ 59.95
Bottom: 4-3\/4” dia. Height: 5-1\/2”
Top: 3-5\/8” dia
Designed for “TAPERED” Bottom: 5” dia
COLM-103B-TC-68”
Designed for “TAPERED”
BASE-115 $39.95 COLM-103B-TC-68”
Height: 5-1\/4”
Top: 3-3\/4” dia. BASE-114
Bottom: 4-3\/4” dia.
Designed for “TAPERED” COLM-
103B-TC-68”
BASE-126AA-TC $39.95
Height: 3-1\/8”
Top: 2-1\/2” dia.
Bottom: 3-1\/4” dia.
Designed for “TAPERED”
COLM-103AA-TC
BASE-126A-TC $44.95
Height: 3-3\/4”
Top: 3” dia.
Bottom: 4-1\/2” dia.
Designed for “TAPERED”
COLM-103A-TC-60
BASE-126B-TC $59.95
Height: 4-1\/2”
Top: 3-1\/2” dia.
Bottom: 5” dia.
Designed for “TAPERED”
COLM-103B-TC-68”
* All sizes are approx.- max W” x max H” x Thickness” 5
BASES
Top view BASE-117A $119.95
BASE-117RA (with rosette) $134.95
Height: 12-1\/2”
Top: 4-1\/4” W x 3” Depth
Bottom: 7” W x 4-1\/2” Depth
BASE-117A-XT $169.95
BASE-117RA-XT (with rosette)
$184.95
Height: 13-1\/4”
Top: 5” W x 3-1\/2” Depth
Bottom: 8-1\/4” W x 5” Depth
BASE-117RA Shown with BASE-117B $249.95 BASE-117A
optional rosette center and insert BASE-117RB (with rosette) $269.95
base molding. Height: 17”
Top: 6-1\/2” W x 4-3\/4” Depth
Bottom: 10-1\/4” W x 6-1\/2”Depth
Top view BASE-123B $119.95 BASE-123RB
BASE-123RB (with rosette) $129.95
Matches Base Moulding Top collar: 4-3\/4” W x 1-1\/4” D BASE-123B & BASE-123RB Were designed to
MLD-320 Bottom: 7-1\/2” W x 2-1\/2” D use with MLD-320 as a baseboard. In this appli-
Height: 13-1\/4” cation MLD-320 was cut & put on top of granite
BASE-123C $159.95 for a distinctive look & increased durability.
BASE-123RC (with rosette) $169.95
Top collar: 5-3\/4” W x 2” D
Bottom: 8” W x 3” D
Height: 14”
BASE-123D $199.95
BASE-123RD (with rosette) $209.95
Top collar: 7-1\/2” W x 3” D
Bottom: 10” W x 4” D
Height: 15-3\/4”
* All sizes are approx.- max W” x max H” x Thickness”
6
BASES
Top view BASE-117A $119.95
BASE-117RA (with rosette) $134.95
Height: 12-1\/2”
Top: 4-1\/4” W x 3” Depth
Bottom: 7” W x 4-1\/2” Depth
BASE-117A-XT $169.95
BASE-117RA-XT (with rosette)
$184.95
Height: 13-1\/4”
Top: 5” W x 3-1\/2” Depth
Bottom: 8-1\/4” W x 5” Depth
BASE-117RA Shown with BASE-117B $249.95 BASE-117A
optional rosette center and insert BASE-117RB (with rosette) $269.95
base molding. Height: 17”
Top: 6-1\/2” W x 4-3\/4” Depth
Bottom: 10-1\/4” W x 6-1\/2”Depth
Top view BASE-123B $119.95 BASE-123RB
BASE-123RB (with rosette) $129.95
Matches Base Moulding Top collar: 4-3\/4” W x 1-1\/4” D BASE-123B & BASE-123RB Were designed to
MLD-320 Bottom: 7-1\/2” W x 2-1\/2” D use with MLD-320 as a baseboard. In this appli-
Height: 13-1\/4” cation MLD-320 was cut & put on top of granite
BASE-123C $159.95 for a distinctive look & increased durability.
BASE-123RC (with rosette) $169.95
Top collar: 5-3\/4” W x 2” D
Bottom: 8” W x 3” D
Height: 14”
BASE-123D $199.95
BASE-123RD (with rosette) $209.95
Top collar: 7-1\/2” W x 3” D
Bottom: 10” W x 4” D
Height: 15-3\/4”
* All sizes are approx.- max W” x max H” x Thickness”
6
BASES BASES
Our exciting new line of bases are specifically designed for our 3, 4, & 5 inch door casings (MLD-
182, MLD-183, MLD-184, & MLD-185). These beautiful new bases are a perfect match for our
door & entry mouldings.
Left Right BASE-118A $139.95 BASE-118
Sold as pairs Width: 3-1\/2”
Height: 13”
Thickness: 2”
(use MLD-182 or MLD-183)
BASE-118B $179.95
Width: 4-1\/2”
Height: 15-3\/4”
Thickness: 2”
(use MLD-184)
BASE-118C $219.95
Width: 5-1\/4”
Height: 15-3\/4”
Thickness: 2-1\/2”
(use MLD-185)
BASE-119 Creates the perfect transition between our MLD-182, 183, MLD-184 or MLD-185 door trim and the
baseboard. The subtle gold highlights and distressing give a great “old world” look.
Top view BASE-119A $69.95 Top view
Width: 3-1\/2”
Height: 13-1\/4” BASE-122A $69.95
Thickness: 1-1\/2” 3-3\/4” x 15” x 2-1\/4”
(use MLD-182 or Top (curved) 3-1\/4” W x 1-1\/2” D
MLD-183) (use MLD-182 or MLD-183)
BASE-119B $89.95 BASE-122B $89.95
Width: 4-1\/2” 4-3\/4” x 17-1\/2” x 2-3\/4”
Height: 16” Top (curved) 4-1\/4” W x 1-3\/4” D
Thickness: 2” (use MLD-184)
(use MLD-184)
BASE-122C $109.95
BASE-119C $109.95 5-3\/4”x 19-1\/4” x 3”
Width: 5-1\/2” Top (curved) 5-1\/4” W x 2-1\/4” D
Height: 16” (use MLD-185)
Thickness: 2-1\/4”
(use MLD-185)
* All sizes are approx.- max W” x max H” x Thickness” 9
BASES
BASE-121
$349.95
9” Max Width
46-3\/4” Tall
4-1\/4” Max. Depth
BASE-120A $349.95 BASE-120B $499.95
7” Max Width
34” Tall 10” Max Width
7” Max. Depth
46-1\/4” Tall
10
10” Max. Depth Our 3\/4” dado is designed to be used with any
3\/4” trim mouldings.
* See mouldings section for a listing of all patterns
that are available.
* All sizes are approx.- max W” x max H” x Thickness”
BASE-130 BASES BASE-131 BASES
BASE-130 & 131 Were designed with a 3\/4” dado collar. This
open dado accepts any 3\/4” insert moulding for a
custom & unique look tailored to your taste.
* See mouldings section for a listing of all patterns
that are available.
3\/4” dado collar
BASE-130
Optional Insert 11
Moulding
BASE-130 & 131 $479.95
55” x 9-1\/4”x 8” Depth
* All sizes are approx.- max W” x max H” x Thickness”
Top view Top view BASES
Top view
BASE-150AA $44.95 BASE-150RAA $49.95 BASE-106AT $109.95
2-1\/2” x 10-3\/4” x 1-1\/4” 2-1\/2” x 10-3\/4” x 1-1\/4” 5” x 20” x 1-1\/2”
BASE-150A $59.95 BASE-150RA $67.95
3-3\/4” x 14” x 1-1\/2” 3-3\/4” x 14” x 1-1\/2” BASE-106BT $189.95
BASE-150B $79.95 BASE-150RB $88.95 5-3\/4” x 26” x 2-1\/2”
5” x 16” x 1-1\/2” 5” x 16” x 1-1\/2”
BASE-106CT $249.95
Top view Top view 7-1\/4” x 30-1\/2” x 3-1\/2”
Top view
BASE-151AA $44.95 BASE-200A $69.95 BASE-200RA $79.95 BASE-200A is designed for use
2-1\/2” x 9-1\/4” x 1-1\/4” 4-1\/2” x 12-3\/4” x 2” 4-1\/2” x 12-3\/4” x 2” on desk table & pullman heights
BASE-151A $59.95 BASE-200B $89.95 BASE-200RB $99.95 of 28-1\/2” - 32.”
3-3\/4” x 14-1\/2” x 1-1\/2” 5-1\/2” x 14-3\/4” x 2-1\/2” 5-1\/2” x 14-3\/4” x 2-1\/2”
BASE-151B $79.95 BASE-200B is designed for use
4-3\/4” x 17-7\/8” x 2” with 36” high applications see
our conceptual line drawing
12 books for design suggestions.
* All sizes are approx.- max W” x max H” x Thickness”
BASES BASES
All Ornamentation is Flexible, Stainable & Paintable.
13
BASES
All Ornamentation is Flexible, Stainable & Paintable.
14
BASES BASES
All Ornamentation is Flexible, Stainable & Paintable.
15
Bases Quick Reference Guide
Capitols that fit 2-1\/4” Width Columns
CAP-130AA CAP-131AA CAP-132AA CAP-200AA CAP-200AA SP-301A A
CB-330AA-C
shown with optional optional insert for
SP-300AA CAP-200AA
Corbels that fit 2-1\/4” Width Columns
DP-201AA
COLM-130AA
CB-310AA CB-311AA-C CB-330AA-C CB-331AA-C
Bases that fit 2-1\/4” Width Column COLM-130AA
Columns are available in 5’ and 10’ lengths
BASE-150RAA
COLM-130AA is shown BASE-106AA BASE-112AA BASE-150AA BASE-150RAA BASE-151AA
with DP-201AA as a drop.
16
Bases Quick Reference Guide BASES
Onlays & Drops for 2-1\/4” Width Columns
3-Piece Set
Transition
Collar
DP-200AA
DP-201AA COLM-130AA
Shown with optional
DP-200AA
COLM-130AA OL-421AAL-S (left) OL-422AA-S Transition collar SPTC-101A
Shown with optional OL-421AAR-S (right) (set of 3)
Transition collar SPTC-102A
OL-421AAL-S
See Specialties section in catalog for
COLM-130AA OL-421AAL-S \/ OL-421AAR-Sand OL-422AA-S a complete listing of corbel options
Sold in 5’ & 10’ Sold individually or set of 3.
for transition collars.
lengths
17
Bases Quick Reference Guide
Capitols that fit 3-1\/4” Width Columns
CAP-130A CAP-131A CAP-132A CAP-141AL CAP-141A CAP-142A CAP-143A L CAP-143A
(Low profile) (Low profile)
CAP-144A CAP-145A CAP-146A CAP-147A CAP-200A CAP-200A SP-301A
shown with optional optional insert
for CAP-200A
insert SP-300A
3-1\/4” Width Columns
COLM-130A is shown with DP-200A
Columns 1-9 available
in 4’ & 7’ lengths.
1. COLM-107A
2. COLM-108A
3. COLM-109A
12 34 4. COLM-110A Transition
5 67 5. COLM-111A Collar
6. COLM-112A
7. COLM-113A
8. COLM-114A
9. COLM-115A
* 10. COLM-130A
8 9 10 * Available in 5’ & 10’ lengths.
Corbels that fit 3-1\/4” Width Columns
Transition collar SPTC-101A
CB-310A CB-311AC CB-330AC CB-331AC Transition collar SPTC-102A
18 See Specialties section in catalog for
a complete listing of corbel options
for transition collars.
Bases Quick Reference Guide BASES
Bases that fit 3-1\/4” Width Columns
BASE-106A BASE-112A BASE-150A BASE-150RA BASE-151A BASE-200A BASE-200RA
Onlays & Drops for 3-1\/4” Width COLM-130A
COLM-130A
is shown with
DP-200A
DP-201A
OL-421AL-S (left) OL-422A-S
OL-421AR-S (right) (set of 3)
Available in L&R modular set
OL-421AL-S \/ OL-421AR-S and OL-422A-S
Sold individually or set of 3.
19
Bases Quick Reference Guide BASES
Bases that fit 4-1\/2” Width Columns
BASE-106B BASE-107B BASE-110B BASE-112B BASE-123B BASE-123RB BASE-150B BASE-150RB *BASE-106AT BASE-151B
*See Trevor section
for part dimensions
Drops & Onlays for 4-1\/2” Width COLM-130B
COLM-130B
is shown with
DP-200B
DP-201B
OL-421BL-S \/ OL-421BR-S and
OL-422B-S
Sold individually or set of 3.
OL-421BL-S (left) OL-422B-S
OL-421BR-S (right) (set of 3)
Available in L&R modular set
21
Column shown Bases Quick Reference Guide
with optional
Capitol and Base Capitols that fit 5-1\/2” Width Columns
CAP-142C
CAP-130C CAP-131C CAP-132C CAP-142C CAP-143C CAP-147C
Corbels with backing plates & built-in transition collars that fit 5-1\/2” Width Columns
* See Trevor section for part dimensions
COLM-112C
CB-310C * CB-311BT * CB-330BT * CB-331BT
Bases that fit 5-1\/2” Width Columns
BASE-106C BASE-107C BASE-112C * BASE-106BT BASE-123C BASE-123RC
* See Trevor section for part dimensions
5-1\/2” Width Columns
COLM--112C-115C-116C-130C available in 5’ & 10’ lengths. COLM-117C available in 5’ & 8’ lengths.
BASE-112C
22 COLM-112C COLM-115C COLM-116C COLM-117C COLM-130C is shown
with DP-200C
Bases Quick Reference Guide BASES
Drops & Onlays for 5-1\/2” Width COLM-130C
COLM-130C
is shown with
DP-200C
Transition
Collar
DP-201C
Bedroom Closet Design OL-421CL-S OL-422C-S
OL-421CR-S (set of 3)
Transition collar See Specialties section in catalog Available in L&R modular set
SPTC-101C for a complete listing of corbel
options for transition collars. OL-421CL-S \/ OL-421CR-S and OL-422C-S
Transition collar Sold individually or set of 3.
SPTC-102C
23
CAP-130D Bases Quick Reference Guide
Capitols that fit 7” Width Columns
CAP-130D CAP-131D CAP-132D CAP-142D CAP-143D CAP-147D
COLM-116D
Corbels that fit 7” Width Columns
* See Trevor Section
for part dimensions
CB-310D * CB-311CT * CB-330CT * CB-331CT
Bases that fit 7” Width Columns
BASE-106D BASE-107D BASE-112D *BASE-106CT BASE-123D BASE-123RD
*See Trevor section for part dimensions
7” Width Columns are available in 5’ & 10’ lengths
BASE-107D
24 COLM-112D COLM-115D COLM-116D COLM-117D COLM-130D is shown
with DP-200D
Bases Quick Reference Guide BASES
Drops & Onlays for 7” Wide COLM-130D
COLM-130D
is shown with
DP-200D
Transition
Collar
DP-201D
OL-422D-S
(set of 3)
OL-421DL-S
OL-421DR-S
in L&R modular set
Transition collar Transition collar
SPTC-101D SPTC-102D
OL-421DL-S \/ OL-421DR-S and OL-422D-S See Specialties section in catalog
Sold individually or set of 3. for a complete listing of corbel
options for transition collars.
25
BASES
All Ornamentation is Flexible, Stainable & Paintable.
26
All Ornamentation is Flexible, Stainable & Paintable. CAPITOLS
Pearlworks, Inc. 14251 Franklin Ave. Tustin, CA 92780
Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS
www.pearlworksinc.com
CAPITOLS Top projection
Profile
CAP-103 Series
Top width
CAP-EXT-100C CAP-103A $39.95 3\/4 round flat back Bottom width Bottom CAP-103A-TC $39.95
6” x 9” x 1-3\/4” Height: 4” projection Height: 4-1\/4”
Top width: 3-1\/2” Top width: 4-3\/4”
$49.95 Top projection: 3-1\/2” Top projection: 2-3\/4”
Bottom width: 3-1\/2” Bottom width: 2-3\/4”
Botom projection: 2-3\/4” Bottom projection: 1-3\/4”
CAP-103B $54.95 3\/4 round flat back Designed for “TAPERED” COLM-103A-TC-60”
Height: 5-1\/8”
Top width: 5-3\/4” CAP-103B-TC $54.95
Top projection: 3-3\/4” Height: 5-3\/8”
Bottom width: 4” Top width: 5-1\/2”
Bottom projection: 2-3\/4” Top projection: 3-3\/4”
Bottom width: 3-3\/4”
Bottom projection: 2-3\/4”
Designed for “TAPERED” COLM-103B-TC-68”
See back of this section for selection of matching Columns and Bases
CAP-130C shown with
CAP-EXT-100C
CAP-EXT-100C
Is designed to go under all
“C” sizes.
CAP-130 CAP-131 CAP-132
Capitol dimensions are exactly the same for CAP-130, CAP-131 & CAP-132
CAP-130AA - 131AA - 132AA CAP - 130B - 131B - 132B CAP - 130D - 131D - 132D
$39.95 $99.95 $239.95
Height: 4-3\/4” Height: 7-1\/2” Height: 11-1\/4”
Top: 3-3\/4” W x 1-1\/4” Depth Top: 9” W x 4-1\/4” Depth Top: 13-1\/4” W x 6” Depth
Bottom: 2-1\/2” W x 1” Depth Bottom: 5” W x 1-1\/2” Depth Bottom: 7-1\/2” W x 2-1\/2” Depth
CAP-130A - 131A - 132A CAP-130C - 131C - 132C
$79.95 $179.95
Height: 6-1\/4” Height: 9”
Top: 7” W x 3-1\/4” Depth Top: 10” W x 5” Depth
Bottom: 3-3\/4” W x 1-3\/4” Depth Bottom: 6” W x 1-3\/4” Depth
2 * All sizes are approx.- max W” x max H” x Thickness”
CAPITOLS
CAP-134A $169.95 CAP-134B $249.95
Height: 10-3\/4” Height: 13-3\/4”
Top Width: 6-1\/4” Top width: 8-1\/2” W
Projection: 3-3\/4” Projection: 7”
Bottom width: 3-1\/4” x 2-3\/4” Bottom width: 4-3\/4” x 4” CAPITOLS
Overall maximum width: 8” Overall maximum: 10-1\/2”
Designed to use with : Designed to use with:
BASE-116A-TC, COLM-106A-TC-54”& BASE-116B-TC, COLM-106B-TC-60”&
COLM-106A-TC-74” COLM-106B-TC-84”
CAP-140A $149.95 CAP-141A $69.95
Height: 8” 4-1\/4” x 7-3\/4” x 2-3\/4”
Top Width: 7-1\/4” Collar 3-1\/2” W x 1-1\/4” D
Projection: 4-3\/8”
Bottom width: 3-1\/8” CAP-141AL $69.95
CAP-140B $219.95 “Extra Low Profile”
Height: 11-1\/2”
Top Width: 10-1\/2” 4” x 7-3\/4” x 1-3\/4”
Projection: 4” Collar 3-1\/2” W x 1-1\/4 ” D
Bottom width: 4-3\/4”
CAP-142A $69.95 CAP-143A $69.95
5” x 7-3\/4” x 1-3\/4” 5” x 8” x 2-3\/4”
Collar 3-1\/2” W x 1-1\/4” D Collar 3-1\/2” W x 1-1\/4 ” D
CAP-142B $79.95 CAP-143B $79.95
6-3\/4” x 9-3\/4” x 2-1\/2” 6-1\/4” x 9-1\/4” x 3”
Collar 4-3\/4” W x 1-1\/4” D Collar 4-3\/4” W x 1-1\/4” D
CAP-142C $159.95
8” x 11-3\/4” x 3-1\/2” CAP-143C $159.95
Collar 5-3\/4” W x 1-3\/4” D 7-3\/4” x 11-1\/2” x 3-1\/4”
Collar 5-3\/4” W x 1-3\/4” D
CAP-142D $209.95
10-1\/4” x 15-1\/4” x 5” CAP-143D $209.95
Collar 7-1\/2” W x 2-3\/4” D 9-3\/4” x 15-1\/4” x 5”
Collar 7-1\/2” W x 2-3\/4” D
CAP-143AL $69.95 3
“Extra Low Profile”
4-3\/4” x 7-3\/4” x 1-3\/4”
Collar 3-1\/2” W x 1-1\/4 ” D
* All sizes are approx.- max W” x max H” x Thickness”
CAPITOLS
CAP-144A $69.95 CAP-145A $69.95 CAP-146A $69.95
6-1\/2” x 7-1\/4” x 2-1\/2” 5-1\/2” x 6” x 2-1\/2” 5-3\/4” x 7” x 2-1\/2”
Collar 3-1\/2” W x 1-1\/4” D Collar 3-1\/2” W x 1-1\/4” D Collar 3-1\/2” W x 1-1\/4” D
CAP-144B $79.95 CAP-145B $79.95 CAP-146B $79.95
8-1\/4” x 10” x 2-3\/4” 8-1\/4” x 9-3\/4” x 2-3\/4” 7-1\/2” x 8-1\/2” x 2-1\/2”
Collar 4-3\/4” W x 1-1\/4” D Collar 4-3\/4” W x 1-1\/4” D Collar 4-3\/4” W x 1-1\/4” D
CAP-147A $69.95
6-1\/2” x 7-1\/2” x 2-1\/2”
Collar 3-1\/2” W x 1-1\/4” D
CAP-147B $79.95
8-1\/2” x 9-1\/2” x 3”
Collar 4-3\/4” W x 1-1\/4” D
CAP-147C $159.95
10-1\/4” x 12” x 3-3\/4”
Collar 6” W x 1-3\/4” D
CAP-147D $209.95
13” x 14-1\/2” x 5”
Collar 7-1\/2” W x 2-3\/4” D
4 * All sizes are approx.- max W” x max H” x Thickness”
CAP-160A CAPITOLS
CAP-134A
CAP-160AA $36.95 CAP-161A $129.95 COLM-106A-TC-54”
Height: 4” Height: 10-1\/2”
Top Width: 3” Top Width: 7-3\/4” CAPITOLS
Projection: 2-1\/8” Projection: 4-1\/4”
Bottom width: 2-1\/8” x 1-1\/2” Bottom width: 3-1\/4” x 2-3\/4” BASE-125A-EXT-TC
Designed for “TAPERED” COLM-103AA-TC Designed for “TAPERED”
COLM-106A-TC-54” or COLM-106A-TC-74”
CAP-160A $44.95
Height: 5” CAP-161B $219.95
Top Width: 4-1\/4” Height: 13-1\/4”
Projection: 2-5\/8” Top Width: 9-3\/4”
Bottom width: 2-3\/8” x 1-5\/8” Projection: 5-3\/4”
Bottom width: 4-3\/4” x 4”
Designed for “TAPERED” COLM-103A-TC-60”
Designed for “TAPERED”
CAP-160B $59.95 COLM-106B-TC-60” or COLM-106B-TC-84”
Height: 6-1\/4”
Top Width: 5” BASE-116A-TC
Projection: 3-3\/8”
Bottom width: 2-3\/4” x 2-1\/4”
Designed for “TAPERED” COLM-103B-68”
COLM-103A-TC-60”
BASE-114A * See Columns Section for Matching BASES BASE-117AR-XT
* All sizes are approx.- max W” x max H” x Thickness” “ ew” Adjustable
5Tapered Columns
CAPITOLS
CAP-200AA $34.95
Top: 3” x 4” x 1-1\/2”
Bottom: 2-1\/2” x 1”
CAP-200A $59.95
Top: 4-3\/4” x 6-1\/4” x 2-1\/4”
Bottom: 3-1\/2” x 1-1\/2”
CAP-200B $69.95 Capitols shown with inserts.
Top: 6-1\/2” x 7-3\/4” x 2-1\/2”
Bottom: 4-3\/4” x 1-1\/2”
SP-300AA SP-301AA
$12.95 $12.95
* We have inserts for all CAP-200
series capitols.
6 * All sizes are approx.- max W” x max H” x Thickness”
CAPITOLS CAPITOLS
7
CAPITOLS
One of the many advantages of our
modular system is its ability to flip
or exchange Columns, Bases and
Capitols for different looks.
8