Miniload Stacker Series

7

Product Introduction

Miniload Light Stacker (hereinafter referred to as Miniload) is a small automated storage equipment suitable for storage scenarios with high storage density and a large number of SKU items.It has the characteristics of light weight,fast speed,high efficiency,and low noise; It can effectively save storage space,improve storage density,and efficiently manage and schedule inventory to improve storage eficiency;Widely used in various industries such as e-commerce and express logistics warehouses，automated chemical plants， food and beverage,pharmaceuticals,etc; Personalized non-standard customization can also be carried out according to customer needs.

Product Characteristics

Product Selection

SC-ML- 01- St- 01- A 1 S = 180
① ② ③ ④ 5 ? 1 8

① Basic model: SC: Stacker crane
② Product type:ML:Miniload； VL:Stacker crane
③ Column form:01:Single column 02:Double column 03:Multi column
④ Track form:St:Straight track Ct:Curved track
⑤ Driving form:01:Wheel drive 02:Belt drive
⑥ Fork form:A:Clamp type fork B:Plate fork
⑦ Extension form:D:Double extension S:Single extension
⑧ Running speed:150m/min；180m/min；240m/min (Customized)
(Note: Currently, the stacker mainly uses multi column straight track)

Application Scenario

Miniload Stacker Series

7 Product Parameters

BK-DDJ01Light Stacker

1.The overall weight is less than 1.5 tons,suitable for various sites with low ground bearing capacity;
2.Simple structure,suitable for boxes of different sizes up to 3 0 0 \mathsf {kg } ; （20
3.Low overall power， low energy consumption，and good equipment stability;
4.Small overall size，low minimum pick-up surface, greatly increasing warehouse storage capacity;
5.Adoptinga rubber-covered roller design, the noise is aslowas65dborless.

Product Parameters

1.The overallweightisless than2 tons,suitable for various siteswith low ground bearing capacity;
2.Simple structure,suitable for boxes of different sizes up to 300kg; 3.High running speed and acceleration greatly improve the efficiency of inbound and outbound operations,with a composite efficiency of over 120pph;
4.Adopting a rubber-covered roller design, the noise is as low as 65db or less.

BK-CG01 Light High-speed Stacke

Miniload StackerSeries

Product Parameters

1.The overall weight is less than 2 tons,suitable for various sites with low ground bearing capacity; 2.Simple structure,suitable for boxes of different sizes up to 300kg; 3.High running speed and acceleration greatly improve the efficiency of inbound and outbound operations,with a composite efficiency of over 180pph; 4.The running dual drive structure ensures smoother operation and low failure rate; 5.Adopting a rubber-covered roller design, the noise is as low as 65db or less.

BK-HDS01 Light UItra High Speed Stacker

Product Parameters

1.The overall weight is less than 1 ton, suitable for various sites with low ground bearing capacity;
2.Simple structure, suitable for boxes of different sizes up to 3 0 0 \mathsf {kg } ; （204号
3.Low overall power, low energy consumption,and good equipment stability;
4.The turning radius is only 1 . 8 \mathsf { m } , greatly improving space utilization;
5.Small overallsize, low minimum pick-up surface, greatly increasing warehouse storage capacity;
6.Adopting a rubber-covered roller design,the noise is as low as 65db or less.

BK-TURS0 Light Curve Stacker

Miniload Stacker Series

Product Parameters

1.The overall weight is less than 1 ton, suitable for various sites with low ground bearing capacity;
2. Simple structure,suitable for boxes of different sizes up to 50kg;
3. High running speed and acceleration greatly improve the efficiency of inbound and outbound operations,with a composite efficiency of over 120pph;
4.The length of the tunnel is not limited,the structure is more optimized,the stability is high,and the failure rate is lower;
5.Adopting a rubber-covered roller design, the noise isas low as 65db or less.

BK-SSM01 Light Stacker

7

Product Parameters

1.The overall weight is less than 1.2 tons,suitable for various sites with low ground bearing capacity;
2.Simple structure,suitable for boxes of different sizes up to 300kg;
3.Low overall power,low energy consumption,and good equipment stability; 4.Small overall size, low minimum pick-up surface, greatly increasing warehouse storage capacity;
5.Adopting a rubber-covered roller design,the noise isas low as 65db or less.

BK-SSM02LightStacker

Miniload StackerSeries

Product Parameters

1.The overall weight is less than 1 ton,suitable for various siteswith low ground
bearing capacity;
2.Simple structure,suitable for boxes of different sizes up to 100kg;
3.The minimum pick-up surface can reach 4 0 0 \mathsf {mm }
4.Equipment heightwithin 3 . 5 \mathsf { m } ,without sky rails;
5.Adopting a rubber-covered roller design, the noise isas low as 65db or less.

BK-SSM02 Light StackerCrane

WMS interface instance

Software operation interface

Miniload related systems

End-to-end one-stop service

Plan and Refine Design and implementand design the plan manufacturing commissioning 8 欢 点 □
Demand research Refined design Softwaredesign anddevelopment Dataanalysis System interface Electric control design Project Mobilization System design Integrated solution anddevelopment Equipment installation
Device Configuration Public works Equipment design Equipment commissioning
System simulation Construction plan Equipment manufacturing Project preliminary inspection After-sale service Regular visits User training Pilot run System maintenance System pilot run Spare parts supply System acceptance

After sales service and content

Quick response

7 ^ { \star } 2 4 Remote support

10min Responding to customers

Service content

Remoteservice

7 ^ { \star } 2 4 -hour remote demand response,fault handling services, upgrade services,and technical training services

Spare part service

Builda spare parts warehouse,regional warehouse,and projectwarehouse to ensure timelyarrival of spare parts on site,purchase

8

}Maintenanceservice

Provide monthly, quarterly,and semi-annual maintenance services based oncustomer needs, providing

2

Trainingservice

Customer operation training,basic fault handling

昌

Fieldservice

Fault handling services,equipment maintenance services,training services,upgrade services

On site services

Provide 7 ^ { \star } 24 hour on-site service according to customer needs

7

muRata Electronics Project

The Wuxi muRata Electronic Intelligent Thin Film Library project has solved the points in the production process of customers' products,and also improved the transparency and accuracy of information management processes for customers. Miniload achieves centralized management, reduces the occupation of stacking in various workshops,standardizes production processes,and can clearly present inventory status，solving the problem of production excess stock and timely scheduling.

Miniload Case

7

Caterpillar Project

Miniload and goods-to-person for small items in the Xuzhou Caterpillar factory has solved the problem of automated picking and matching of multiple excavators according to various models and workstations in the original production line. It can achieve functions such as material adjustment according to production tasks, greatly reducing the number of personnel,employee workload,and error rate.This project is equipped with high-speed,dual workstation,single extension Miniload stacker and put-to-light,WMS warehouse management system, etc.

MultiLayerStacker

Tel:+861516715 8368
Email: eric.guo@baokai.cn
Website:www.baokai.cn
Address: 89 Baoying Avenue, Baoying Economic Development
Zone, Jiangsu Province, China