公司简介

Company Profile

温美(广州智能机械有限公司，位于制造业发达的国内一线城市广州，长期经营缝纫机及鞋机设备的设计生产及销售，历时十载，发展至今已被众多客户熟知并深受青睐。主营产品包括“港隆”缝纫机系列、“温美”鞋机系列等上百种鞋类制作相关机械。长期参与行业展会，产品在国内热销，并出口到东南亚等地，深受国内国外客商喜爱。

WenMei(Guangzhou) IntelligentMachineryCo.,Ltd., locatedin Guangzhou,the firstline cityin the manufacturingindustry,has long been engaged in the design,productionand saleofsewingmachineand shoe machine.It has lasted ten years,and has been well known and favored by many customers.The main products include "Gong Long" sewing machine series,"Wen Mei" shoe machine series,and more than 1oo kinds of shoe making related machinery.Long termparticipation in industry exhibitions,products sold wellin the country,and exported to SoutheastAsiaand otherplaces,deeply loved by domesticand foreignmerchants.

LL INAUSTRIALSEWING工业用皮革缝纫机

新型沙拉组：增加手动就能将沙拉组弹开，即可拉线，不需使用脚弓组

Newpatentedthreadtension: Thenewthreadtensioniseasy toincreasemanualluy.Thereis noneedtousearch set.

新型轮钱组：旧款轮钱组滚珠设计容易裂开脱落，改新型轮钱组万向接头带动，轮钱棒较为坚固、耐用，灵敏性高

Newrollerset:theballofold rollerseteasilycrackedand dropped.Thenewrollerset adoptstheuniversaljointand becomsmoredurableand highlysensitive.

新型切线刀结构设计新颖、独特，安装简易，调整方便动作灵活，剪线头短便于保养维修

Thenewcutterhasnovel andunique designand is simpletomount,convenient toadjust,smartinmovement therebyenablingshorter loosethreadends.Itiseasy andconvenienttomaintain andrepair.

车头一体成型，电脑加工 规格准确内皮带不易磨损

Theheadstockofmachineintrgrated withcomputerprocessinghasexact specificationanddurable innerstrap.

方便的设置各种参数如转速、上停针位置方便的启动和取消自动剪线、自动抬压脚。

Setparameters
conveniently,likethespeedof rotationandtheupperstop position.
Easilyenableordisablethe functionofaddingback-andforthreinforcingstitches.
Easilyenableordisablesuch functionsasauto-trimmerand automaticpresserfootlifting.

增加手动倒缝让操作者更容易使用

Increasethemanual reversestitching,make theoperatormore convenienttouse.

桌面高低可调使用便捷Thetopand lowof thetableisadjustableandeasytouse

技术参数 TECHNICALSPECIFICATION

产品介绍 PRODUCTINTRODUCTION

GL-891/892

·低能耗相对离合器电机节电 60 % - 8 0 %

Lowest engergy cons sumption(comparing with the cluth motor,saving 6 0 % -80%energy)

·低噪音 Lownoisy

·低震动 Lowvibration

低温升电机工作时发热量极低，有效降低车间温度. Low temperate(Lower the temperature in the workshop)

·全时伺服 Servo motor

·自动倒缝，自动抬压脚脚控及自动 Auto backstritching

·脚控无级变速反应灵敏，变速平顺 Steplessspeed change

可设置最高转速不同转速适应特殊需求Adjustthehighestrevolutionspeed(According to the requirement)

·自动定位刹车即自动控制停针位置，提高功效1 0 % Auto positioning(improve the work efficiency)

自动精准剪线脚控自动剪线，提高功效 1 0 % 以上 Auto matic precise auto thread trimming (improveatleast 10 % word efficiency)

超宽电压工作AC200V-240V正常工作Wide working voltage(between 200-240v)

过转自动保护 Automatic prevention

单针/双针直驱全自动剪线倒缝罗拉车（自动抬压脚）

SINGLE/DOUBLENEEDLEDIRECTDRIVEFULLYAUTOMATICTHREADTRIMMING,BACKSTITCHSEWINGMACHINE(AUTOMATICPRESSERFOOT)

<

采用立柱式底板 USEVERTICALPOSTBED

采用立柱式底板，使缝纫机操作方便、灵活的缝制各种圆弧角，适用广泛。
9620系列采用双立柱、双旋梭、双线线迹一致。

Thevertical post bedmakessewing operationseasyand convenient enables flexiblesewingofvariousarcstitches,therebymaking the machinesuitableforusinginawiderangeofapplications. 9620 series uses double vertical postsand double rotaryshuttlesand enablesconsistentdouble-threadstitches.

直接驱动方式 DIRECTDRIVEMODE

采用机电一体化的伺服电机控制自动剪线装置和电气动控制抬压脚、自动倒回缝，实现了自动化操作，大大提高了工作效率。

Adoptanelectromechanically-integratedauto-trimmerunitcontrolled withACservemotorandcontroloperations,likepresserfoot lifterand automaticreversesewing,through itselectriccontrolsystem,thereby realizingautomatedoperationand hencesubstantially increasedwork efficiency.

操作简单的面板 EASYOPERATIONPANEL

方便的设置各种参数，如转速、上停针位置。
方便的启动和取消自动剪线、自动抬压脚。 Set parameters conveniently,like the speed of rotationand the upper stopposition.
Easilyenableordisable the functionofaddingback-and-forth
reinforcingstitches.
Easilyenableordisablesuch functionsasauto-trimmerandautomatic presser foot lifting.

产品介绍 PRODUCTINTRODUCTION

本机采用流线型设计，使其外观更新颖，球形及针状轴承，配合连杆式天平，摩擦小、免保养、特殊的安全离合，毛毛组二档强力制与；双滚单边推送式配针送、能使车缝减少梭头损坏，薄料不起皱，不变形，厚料车缝更能展示此车的爬坡力强，针距一致，缝迹更美观等优点。

Streamlineddesign inadoptioninthismachine,make itsexternalappearancemorenovel,ball lypeand needle form bearings,the match connects the pole type weighingscales,rubbigthesmalldoingnotneed maintain,specialthe3afetyleavestomatch,hairhair settwo strong dintsystemin filesesrollswith double the single side pushes the send to type goes together withTheneedlesendscanmakethecarsewtheinside toreduceadamage,thinanticipate to do notshrive l, notTransform,thickanticipate thecarsewandcan alsodisplay this carclimbs the dintof strong,the meedle isapart fromawith theresult that,sew the beautiful etc,Investigeadvantage.

GL-8810/8820

产品介绍 PRODUCTINTRODUCTION

本机采用流线型设计，使其外观更新颖，更便捷。球形及针状轴承，配合连杆式天平，摩擦小、免保养、特殊的安全离合，毛毛组二档强力制与；双滚单边推送式配针送，能使车缝减少梭头损坏，薄料不起皱，不变形，厚料车缝更能展示此车的爬坡力强，针距一致，缝迹更美观等优点。

Themachineadopts streamlinedesign,whichmakesits appearancemorenovelandconvenient.sphericalAnd needle bearings,combined with a connecting rod balance, have low friction,maintenance free,and special featuresSafe clutch,second gear strong control of the Maomao group;Double roll single side push type needle feedingCanreduce thedamage to theshuttle headduring sewing，preventwrinklinganddeformationof thinmaterials, and prevent heavymaterial from being damagedSewing can better demonstrate the vehicle's strong climbing ability, consistent stitch spacing,and more beautiful stitchingadvantage.

Simplydesign,so that the operatorisnot easy to fatigue;automatic lubricating system,save forever without changing the horn under normal use.
Separate transmission structure,when the sewing line,willautomatically cut off the power supply. The motorcan automatically position and enhance the foot,the operating speed can be adjusted arbitrarilyaccording to the operator;the maximum speed can reach 1oo0 rpm.
Suitable for sports shoes,casual shoes and all kinds of special sewing.

产品介绍 PRODUCTINTRODUCTION

F广心

适用于运动鞋、休闲鞋、复式鞋的侧缝锁式边线加工
采用电子调整马达，速度可灵活掌握，停针位置由电脑控制轻巧的摇臂结构设计，使操作者不易疲劳；浸油式的润滑系统，在正常使用下保存永远不必换牛角。
分离式的传动结构，当车缝卡线时，会自动切断电源，停止运转，保护机器不受损。
电脑定位马达能自动定位及提升押脚，运转速度可依操作者需要任意调整，最高速度可达每分钟1000转。
适用于运动鞋，休闲鞋及各种特殊车缝。Light rocker,easy to operate,oiled system,protecting the oxhorn.
Divided rotatingstructure,power turn-offautomatically and stop when gripping,
protecting the machine.
Fixing automatically,presser is controlledbycomputer;the revcanbe setac cordingto theoperator,the
maxrevcanbe10o0circle/minute.
Suitable forsneakers,casual shoes,andother special materials.
仅不参数：
缝制速度 SteplessSpeed 无极调速Stepless Speed regulating
电动 机 Motor 750W/单相220V三相380V50-60HZ
线迹长 度 Stitch length 3-13mm
缝制厚度 Sewing thickness 1.5-6mm
机 针 Sewing needle Cpx5
重 量 Weight 140kg
外型尺寸 Overall size 120x56x145cm(LxWxH)
梭心直径/厚度 Diameterthickness 26/11mm

座式内线机（童鞋款）

产品介绍 PRODUCTINTRODUCTION

轻巧的摇臂结构设计，使操作者不易疲劳；浸油式的润滑系统，在正常使用下保存永远不必换牛角。

分离式的传动结构，当车缝卡线时，会自动切断电源，停止运转，保护机器不受损。

电脑定位马达能自动定位及提升押脚，运转速度可依操作者需要任意调整，最高速度可达每分钟1000转。适用于运动鞋，休闲鞋及各种特殊车缝。

Lightrocker,easytooperate,oiledsystem, protecting the oxhorn.
Divided rotating structure,power turn-off automatically and stop when gripping,
protecting the machine.
Fixingautomatically,presser iscontrolled bycomputer;the rev canbe setaccording to the operator,themaxrevcanbe1000 circle/minute.
Suitable for sneakers,casual shoes,and otherspecialmaterials.

技术参数：

电动 机 Motor 550W/380V三相Three-phase 线迹长度 Stitch length 3-13mm 缝制厚度 Sewing thickness 1.5-6mm 机 针 Sewing needle Cpx5 重 量 Weight 150kg 外型尺寸 Overall size 107x56x125cm(LxWxH) 梭心直径/厚度 Diameter thickness 26/11mm

产品介绍

PRODUCTINTRODUCTION

轻巧的摇臂结构设计，使操作者不易疲劳；浸油式的润滑系统，在正常使用下保存永远不必换牛角。

分离式的传动结构，当车缝卡线时，会自动切断电源停止运转，保护机器不受损。

电脑定位马达能自动定位及提升押脚，运转速度可依操作者需要任意调整，最高速度可达每分钟1000转。适用于运动鞋，休闲鞋及各种特殊车缝。

Lightrocker,easytooperate,oiledsystem, protecting the oxhorn.
Divided rotating structure,power turn-off automatically and stop when gripping,
protecting the machine.
Fixingautomatically，presser iscontrolled bycomputer;the revcanbe setaccording tothe operator,themaxrevcanbe1000 circle/minute.
Suitable forsneakers,casual shoes,and otherspecialmaterials.

技术参数：

电动 机 Motor 550W/380V三相Three-phase 线迹长度 Stitch length 3-13mm 缝制厚度 Sewing thickness 1.5-6mm 机 针 Sewing needle Cpx5 重 量 Weight 150kg 外型尺寸 Overall size 107x56x125cm(LxWxH) 梭心直径/厚度 Diameter thickness 26/11mm

电子花样机ELECTRONICPATTERNMACHINE

<

产品介绍 PRODUCTINTRODUCTION

采用大书画液晶操作屏、书面简洁、操作简单。功 能更丰富。

高速化：最高缝纫速度为2500针/分使用方便：采用触屏式液晶操作屏。高性能化：具有简单程序编制功能。

High Speed Max.sewing Speed:2,500rpm.
Easy Operation Liquid Crystal Touch Operation Panel.
Versatility Equippde With The Simple Program ControllerFunction.

主要技术参数TECHNICALSPECIFICATION

使用高质量之材料及技术，制造出高品质，高精密度及耐用性操作上安全简易之保养与维修，且易更换零配件用于各种皮革制品之削边

Withhighqualitymaterials&increasethedurability&function.
It'seasytochange parts&maintenance.
Suitable forany kindsof leather,rubber for belts,bags,shoes,gloves,wallets.etc...

用于：皮包/皮带/手套/皮鞋及各种皮革制品表面之削薄

Itsuitable foredgescrapingand surfacescraping for,leathershoes,suitcase,bag,purse,rubber,glove,etc...

GL-A6-1精密削皮机系列PRECISE LEATHERSKIVINGMACHINESERIES<

产品介绍 PRODUCTINTRODUCTION

本机设有自动除梢装置和磨刀离合器，可配用多种押脚，易于更换配件，保养与维修，设有三段极速快慢随心所欲。

主要技术参数：平面削薄最大宽度： 5 0 \mathsf {mm } 最高转速：2800转/分钟通横截面最大弧度：45度

Inadditionto shoot the machinewith automatic clutchdeviceand sharpening,canbe equippedwithavariety ofpresserEasyreplacementof parts,maintenanceandrepair,thereare threesections speed Xpress For. Maintechnical paremeters: Maximumwidth of 5 0 \mathsf {mm } flat thinning Themaximumspeedof2800r/min Cross-section through the largest

单针综合送料平缝机

SINGNEEDLECYLINDERBEDSEWING MACHINEWITHUNISONFEED

V

产品介绍 PRODUCTINTRODUCTION

特别针对小型至大型管状物之旋转车缝设计，车缝顺 手无阻碍.综合送料，运转肃静，不拘材料表面之平滑 或粗糙不平整，在缝制时皆很稳定.当几层皮料加在 一起缝制时，内层也不会移动
缝制鞋子滚边，凹凸，转角等形状时比较稳定，减少断 针及断线
并可缝制较整齐美观的线路
选配大旋梭
圆筒直径46mm. Themachinesarewalking foot,needle feedand feeddog,with3transport position.
Nomatterthematerialssurface iseithersmooth orrough.It can sew steadily.
The inner layerwon'tmove,evenseveral
leathersaresewedtogether.
Bysteadilyhemmingshoesandstitching the concave,convexcorner,youcansparea lotof costsand time.
Theneedle clampwithanextrasettingplate let yousewanytingstably,several leatheraresewn togetherand ensures lessdiscrepancyin
stitching.
Largehookavailable.
Diameterofcylinder-bedis46mm.

小梭/大梭SMALLHOOK/BIG HOOK大梭BIG HOOK

筒式综合送料平缝机 CYLINDRICALBEDCOMPOUND FEEDLOCKSTITCHER v

产品介绍 PRODUCTINTRODUCTION

本机设计采用小筒形缝台，综合送料，同步式移动包边装置。机器外观设计新颖，操作调节方便，缝纫线迹美观均衡，工作效率出众。由于小直径筒形缝台，广泛应用于各类皮具、皮革服装生产、制鞋、座椅垫子加工。适用于皮服、包装、皮具的缝纫及制鞋、箱包、坐垫生产中的滚边工序。

This model is designed with small radius cylinderbed,compound feedmechanism andsynchronizedbinder.ltfeaturesa novelappearance,easysewing operations,niceandevenstitchesand highproductivity.Withthesmallradius tubularbed,itisavailableinbinding operationforleathergarment,case& bag,shoes,seat cushion,etc.

产品介绍 PRODUCTINTRODUCTION

可在薄、中、厚料上做直缝、曲缝、绣花、拼缝、套结、结缝、包边缝、拉链缝、包梗缝、花纹缝等。

针位可左、右、中调节，能形成绚丽多彩的装饰图案，内藏式绕线器，反向送料机构。

The machine is suitable forstaight
seaming,zingzag,embroidery,abutted,b ertacking,overedgeseaming
seaing,zippere inserting
seaming,Wrappedaroundseaming
patternseaming on thinand medium fabrics.Theneedlepositioncanbe
aedjusted between the rightand the left toformbeautifuldecorative
designs.The machineadoptsbuiltin threadwinder,backward feeding
mechanism.

GL-20U53

曲折缝纫机

Zigzagsewingmachine

产品介绍 PRODUCTINTRODUCTION

本机采用自行研发摆针结构，摆幅稳定全自动加油，增加本机使用寿命，降低零件损耗与维修费用.

全开放式车头顶盖，便于维修处理三/四点人字车可以增强缝制部位的缝合力适用于：鞋/手提袋/汽车坐垫/运动护具等包边缝合

New mechanism of pendulous needle assures stability of each stroke.
Thedesignoffullyautomatic lubricationenforces anadequate amount of oil that results insmooth and quietoperation.
The full-opening head'scover is good for easy machinerymaintenanceandrepairing.
Zigzaggingstitcheswith3or4pointsstreng thens stability ofstitching rows.
Suitable formaterialssuchas:tents,vehicle
seats,artificialleather,bags,shoes,port
equipments,etc.

自动加油横筒式曲折缝纫机(小梭)

AUTOOILERTRANSVERSETUBEZIGZAGSEWINGMACHINE(SMALLHOOK)

GL-1350/1530D

曲折缝纫机（高速 Zigzag sewing machine (high speed)

V

产品介绍 PRODUCTINTRODUCTION

本机采用自行研发最新摆针机构，摆幅稳定/机身重/车缝速度快，采用2800spm电机，50mm皮带轮，效益可达一般人字车1.5倍以上

全自动供油系统，可确保零件不易磨损，增加本机使用寿命，降低维修费用

下轴直接传动旋梭轴，无中继齿轮，减少齿轮间缝，勾线规格调适方便.

本机采用2倍大斧与梭芯，减少更换底线时间，减少工时浪费，提升缝制效率开启式车头顶盖，便于维修处理.

三/四点人字车可以增强缝制部位的缝合力 用途：潜水衣/韵律服/皮革箱包/鞋子等

Newmechanismofpendulousneedlewith fastsewingspeed,2800spmmotor,50mm pulley,1.5times higherefficiency. Fullyautomatic lubrication assures less friction on machine parts;which increases thelifeofthemachine,andlowersthefee for repairing.

Thelowershafttransfersthemovementto theaxleoftherotaryshuttle. Double thesizeofa largebobbinreduces the frequency of changing the bobbin thread;and which also risesup sewing efficiency.

The full-opening head's cover is good for easymachinerymaintenanceand repairing. Zigzaggingstitcheswith3or4points strengthensthestabilityofstitchingrows. Suitable for:divingsuits,aerobic clothing,artificialleatherbags,shoes,etc...

GL-1530X

曲折缝纫机（高速）

Zigzagsewingmachine (highspeed)

<

本机采用自行研发最新摆针机构，摆幅稳定/机身重/车缝速度快采用2800spm电机50mm皮带轮，效益可达一般人字车1.5倍以上.

全自动供油系统，可确保零件不易磨损，增加本机使用寿命，降低维修费用

下轴直接传动旋梭轴，无中继齿轮，减少齿轮间缝，勾线规格调适方便

本机采用2倍大斧与梭芯，减少更换底线时间，减少工时浪费，提升缝制效率开启式车头顶盖，便于维修处理

三/四点人字车可以增强缝制部位的缝合力 用途：潜水衣/韵律服/皮革箱包/鞋子等

Newmechanismofpendulousneedlewith fastsewingspeed,2800spmmotor,5mm pulley,1.5times higherefficiency. Fullyautomatic lubricationassures less friction on machine parts;which increases the life of the machine,and lowers the fee for repairing.

The lower shaft transfers the movement to theaxleoftherotaryshuttle. Double the size ofa large bobbin reduces the frequency of changing the bobbin thread;and which also rises up sewing efficiency.

The full-opening head'scoveris good for easymachinerymaintenanceandrepairing. Zigzaggingstitcheswith3or4points strengthens the stability ofstitchingrows. Suitable for:divingsuits,aerobic clothing,artificialleatherbags,shoes,etc...

GL-810A/820
单针/双针高头车
SINGLENEEDLE/DOUBLENEEDLE
POSTBEDSEWINGMACHINE
V

产品介绍

PRODUCTINTRODUCTION

自小配件与细微材料之缝制及曲线型之缝纫，本机是能使您优越缝制技术威力充分发挥之高头车.采用全回转水平式大斧与滑动式挑线杆，能使缝纫之线日益显平整结实与美观.

采用简易标数盘旋转式之缝目调节器，能使缝目之大 小更易于控制，回缝时仅需将回针一压即可

The pole projecting makes iteasilytoapply your superiortechnical forsewingsmall partsand specialshaped typematerial.
Specialrotary,horizontalhookandpositiontype.Take-up leaverapplied to thismachine.You cansewsmoothlyand easilywith fine finishing. The simplenumberdishand rotarystitch
regulatormake theneedlestitchunder
controlled easily,quick back-stitch bypush the back-stitch plate.

后踵压条机

SEAMOPENING&TAPEATTACHER

<

产品介绍 PRODUCTINTRODUCTION

用于各种鞋类后踵车缝之整型和补强布条之贴合压平， 操作简单.

ldeal forappearance finishingof the heelvamps sewnand forpressingthe heel vampreinforcement springs glued forgoodappearance.Easy to contral.

自动加油中底缝合机（拉帮机）HIGHCAPACITYSTRINGLASTING(HEAVYDUTY)

产品介绍

PRODUCTINTRODUCTION

本机采用自动加油装置，使本机寿命加长，没有渗油的烦恼.

手臂高，有较多的操作空间，使用方便本机采用手压式区分针距方便操作者操作机器特殊设计容易操作，增加产能

Automatic lubrecationforlongerservice life,nooil leakage problem due to special design. Better handingdue to extra large clearance under front cup arm.

Easyadjustment of stitch length by push button.
Dsigned foreasyoperation,this increasing output.

产品介绍 PRODUCTINTRODUCTION

适用于鞋面内里之修边
鞋底毛边之修剪，入橡胶/塑胶/PU鞋底等 各种射出鞋底修边，有冷却水装置
操作简单.
用途：马靴/运动鞋/女鞋/男鞋/凉鞋 Suitable for trimming edge of vamp lining products.
Fortrimroughedges footwearsbottom withwatercoolingsystem.
Easytocontrol.
Ldeal forboots,sportshoes,work
shoes,leisureshoesandetc...

GL-903/202

内里修边机

INNERTRIMMINGMACHINE

<

产品介绍 PRODUCTINTRODUCTION

采用综合送料，线迹精准美观不损坏物料表面；压脚提升高达 2 3 \mathsf {mm } 适用于缝制极厚物料采用进口大型摆梭，减少换底线次数，提高工作效率适用范围：适合缝制安全带/帐篷/椅垫/马鞍/极厚物料/箱包类等

Itadoptscomprehensive feeding,accurateand beautifulstitches,anddoesnotdamagematerial surface.

Presser foot lifting up to 2 3mm ,suitable for sewing extremelythickmaterial;

The imported large swing shuttle can reduce the numberofbottom linesandimprove thework efficiency.

Scopeofapplication:

Itissuitableforseatbelt/tent/cushion/saddle/ extremelythickmaterial/bagand soon.

综合送料特厚料缝纫机

SYNTHETICTHICKMATERIAL SEWINGMACHINE

产品介绍 PRODUCTINTRODUCTION

GL-9800

高集成智能机电一体化直驱自动剪线高速平缝机

1.集显示屏，控制器，直驱伺服电机于一体。
2.产品更加智能。
3.操作更加便捷。
4.性能更加优越。
1.Displayscreen,controlleranddirectdrive
servo motor,change parts inwhole part;
2.Machine is more intelligent;
3.Operation ismore easyand quick;
4.Function is more stronger.

HIGHLYINTEGRATEDMACHATRONICCOMPUTERZED DIRECTDRIVELOCKSTITCHMACHINEWITHAUTOTRIMMER

产品介绍 PRODUCTINTRODUCTION

最高转速：2000转/分
操作空间：260X120mm
上下送料，自动供油系统，大旋梭。
CXL表示粗线型
适用于缝制箱包，坐垫，沙发，帐篷等。MAXSEWINGSPEED2,000SPM.
CLEARANCEUNDERTHE
ARM:260X120mm
Fullyautomatic oil pump lubrication systemEQUIPMENT:
Automatic threadtrimmer&backtack;
CX:Thickthread
Suitable forsewing
canvas,leather,jeans,suchas
cushion,sofa,tents,etc.

GL-0313

高速直驱电脑中厚料上下送料平缝机DIRECTDRIVEMEDIUMTHICKUPPERANDLOWERFEEDLOCKSTITCHSEWINGMACHINE

GL-151
全自动数控折边机
CNCAUTOMATICCEMENTING&
FOLDINGMACHINE
<

追求卓越品质 PURSUITOFEXCELLENCE

成就港隆价值ACHIEVEMENTO GONVALUI