该页无缩略图
PROFESSIONALWELDING &CUTTINGSOLUTIONS
DrivenbyInnovation.BuiltforPerformance.
COMPANYOVERVIEW
FoundedinZongshanChinaDERisrofessioalafactureseialiinginrtereingdutinqipt Withadvancedmanfacturingfacilitiestronesearchandevelopmentapabilitiesandaomprehensiveualitymaagement system,WoDERhasestablished itselfasatrustedsupplierforcustomersworldwide.
Ourproductportfolio includes:
·MMA(Stick)Welders
·MIG/MAG Welders
·TIGWelders
·Plasma Cutting Systems
·Multi-Process Welding Systems
·Welding Accessories
WODER productsarewidely used in:
·MetalFabrication
·Construction
·Shipbuilding
·Automotive Manufacturing
·Pipeline Installation
·Maintenance&Repair
·IndustrialManufacturing
Drivenbyinnovationandcustomer-focusedserviceWODERcontinuouslydevelopsreliableandcostefectivesolutionsto meet the evolving needsof globalwelding professionals.
HOWTO CHOOSETHERIGHTWELDINGPROCESS
Selecting the right welding process depends on the material type,working environment, productivity requirements,and desired weld quality.
| Metal Type | MMA Stick | MIG | FCAW | AC-TIG | DC-TIG | Plasma |
| STEEL | ★ | ★ | ★ | ★ | ★ | |
| STAINLESSSTEEL | ★ | ★ | ★ | ★ | ★ | |
| NICKLE ALLOYS | ★ | ★ | ★ | ★ | ||
| ALUMINIUM | ★ | ★ | ★ | |||
| CAST IRON | ★ | ★ | ||||
| COPPERBRASS | ★ | ★ | ★ | |||
| TITANIUM | ★ | ★ | ||||
| MAGNESIUMALLOYS | ★ | ★ | ||||
| ALLELECTRICALLYCONDUCTIVE | ★ | |||||
| SKILL LEVEL | MODERATE | LOW | LOW | HIGH | HIGH | LOW |
| Welding Process | Cuttings | |||||
Finding the welding equipment that's right for you,Follow the steps below.
1.Pick the right process for the metals to be welded or Cutted.
MIG (GMAW) * SSSNiALCB
■Easiest process to learn
■ High welding speeds possible
■Provide better control on thinner metals
■Cleaner welds possible with no slag
■Same equipment can be used for fluxed-cored welding
Pulsed MIG (GMAW-P)
■Flexibilityand productivity-nearly all metals can be welded in all positions
■Larger dismeter elecrode wires for higher deposition rates
■Virtually no spatter
Welds thin to thick metals
Flux-cored (FCAW)
■Can work as well as stick on dirty rusty material ■Out-of-postion welding ■Deep penetration for welding thick sections ■Increased metal deposition rate
Stick(SMAW) sSSNiCI ■Well suited for windy,outdoor conditions ■More forgiving whenwelding ondirty or rusty metal
TIG (GTAW)
ACAL Mg DC S SS Ni CB Ti
■Provides highest quality and most precise welds
■ Highly aesthetic weld beads
■Allows adjustment of heat input while welding by use of remot control
Pulsed TIG (GTAW)
ACALMg DC S SS Ni CB Ti
■More control on thin metals ■Less heat distortion on thin metals
Plasma ARC (PAC) Cutting and Couging * SSSNALCBCMgEC
■Use with any electricaly conductive metals
■Small and precise cut
■Small heat-afected zone which helps prevent warp or paint damage.
DCINVERTERMMAWELDERSYSTEMS
Reliable Stick Welding Solutions for
ARC Series Function:MMA/CEL/TIG
Processes
MMA (Stick Welding) Cellulosic Electrode Welding Lift TIG Welding
KeyFeatures
Advanced inverter technology
Stable welding current output
Easy arc starting
Excellent arc stability
Automatic over-current protection
■Automatic over-voltage protection
Low power consumption
Compact and portable design
Reliable performance in demanding environments
SuitableMaterials
Carbon Steel
Stainless Steel
Typical Applications
酒 将 # Fabrication Workshops Structural Steel Pipeline Installation 鑫 金 X Shipbuilding Construction Projects Maintenance & Repair
MMA 8.8.8 %
T
CEL HOT START ARCFORCE
里
TIG ANTISTICK VRD
CompleteWithMask&Accessories
9
Welding Mask Brush & Hammer
Earth clamp and cable
Electrode holder and cable
| MODEL | ARC/MMA-120 |
| Rated input voltage/Frequency | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 5.1 |
| Rated Input Power(kVA) | 23.2 |
| Rated output current (A) | 120A/23.19V |
| Output curent range(A) | 20-120 |
| Duty cyclef(%) | 30 |
| No-load voltage(V) | 60 |
| Eficiency(%) | 80 |
| power factor | 0.93 |
| Protectcass | IP21S |
| Insulation class | F |
| Cooling Method Usable electrode(mm) | air cooling |
| Dimension(CM) | 1.0-2.5 |
| N.W. (KG) | 27.5*12*23.5 |
| 2.7 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
Built with advanced IGBT inverter technology, WODER professional MMA welding systems provide superior arc stability, improved welding performance,and enhanced energy efficiency. 1 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
Hot Start Function Arc Force Control Anti-Stick Protection Stable Arc Performance Excellent Penetration High Duty Cycle Industrial-Grade Reliability
Applications
3 将 上 Heavy Fabrication Steel Structures Equipment Manufacturing A % 自 Construction Sites Maintenance Services
CT 8.8.8 m ①
TIG
HOTSTART ANTISTICK%
ARCFORCE VRD机
| MODEL | ARC/MMA-140 | ARC/MMA-160 |
| Rated input voltage/Frequency | AC 220±15%50/60Hz | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 6.1 | 7.2 |
| Rated Input Power(kVA) | 27.7 | 32.7 |
| Rated output current (A) | 140A/25.6V | 160A/26.4V |
| Output curent range(A) | 20-140 | 20-160 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-3.2 | 1.0-3.2 |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| N.W. (KG) | 3.5 | 3.5 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
1 Builtwith advanced IGBT inverter technology,WODER professional MMA welding systems provide superior arc stability, improved welding performance, and enhanced energy efficiency. 1 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
■Hot Start Function Arc Force Control Anti-Stick Protection ? Stable Arc Performance Excellent Penetration ? High Duty Cycle ? Industrial-Grade Reliability
Applications
吊 将 8 Heavy Fabrication Steel Structures Equipment Manufacturing 自 % Construction Sites Maintenance Services
L 8.8.8 ①
TIG
HOTSTART ANTISTICK L %
ARCFORCE VRD Hz
| MODEL | ARC/MMA-180 | ARC/MMA-200 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 8.4 | 9.6 |
| Rated Input Power(kVA) | 38.2 | 43.6 |
| Rated output current (A) | 180A/27.2V | 200A/28.8V |
| Output curent range(A) | 20-180 | 20-200 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-4.0 | 1.0-4.0 |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| N.W. (KG) | 3.8 | 3.8 |
ARC Series Professional Mma Welding Solutions
| MODEL | ARC/MMA-295 | ARC/MMA-315 |
| Rated input voltage/Frequency | AC 220/380±15% 50/60Hz | AC 220/380±15% 50/60Hz |
| Ratedinputcapacity(KVA) | 6.2 | 7.2 |
| Rated Input Power(kVA) | 16.3 | 18.9 |
| Rated output current (A) | 140A/25.8V | 160A/26.4V |
| Output curent range(A) | 20-145/145 | 20-160/160 |
| Dutycyclef(%) | 60 | 60 |
| No-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protectcass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-3.2 | 1.0-3.5 |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| N.W. (KG) | 4.5 | 4.5 |
ARC Series Professional Mma Welding Solutions
Designed for Professional and Industrial Applications
1 Builtwith advanced IGBT inverter technology,WODER professional MMA welding systems provide superior arc stability, improved welding performance, and enhanced energy efficiency. 1 These machines are ideal for demanding applications requiring continuous operation and reliable performance.
Key Benefits
Hot Start Function Arc Force Control ? Anti-Stick Protection ? Stable Arc Performance ? Excellent Penetration ? High Duty Cycle ? Industrial-Grade Reliability
Applications
品 将 1 Heavy Fabrication Steel Structures Equipment Manufacturing B % 直 Construction Sites Maintenance Services
LT 8.8.8 ①
TIG
HOTSTART ANTISTICK L
ARCFORCE VRD 加 Hz
| MODEL | ARC/MMA-320 | ARC/MMA-420 |
| Rated input voltage/Frequency | AC 220/380±15% 50/60Hz | AC 220/380±15% 50/60Hz |
| Rated input capacity(KVA) | 9.6 | 11.4 |
| Rated Input Power(kVA) | 25.3 | 30.0 |
| Rated output current (A) | 180A/27.2200A/28.8V | 200A/28.8230A/29.2V |
| Output curent range(A) | 20-180/200 | 20-200/230 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 70 | 70 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-4.0 | 1.0-4.0 |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| N.W. (KG) | 5.1 | 5.1 |
ARC Series Industrial Mma Welders
Power, Reliability and Productivity
Engineered for intensive industrial environments, WODER industrial MMA welders are designed to deliver stable performance under continuous heavy-duty operation.
Key Features
Advanced Digital Control System Wide Input Voltage Range Intelligent Cooling System High Efficiency Power Conversion Automatic Protection Functions Rugged Metal Housing
A 将 金
Shipbuilding Structural Steel Oil & Gas
5 %
Pipeline Construction Heavy Equipment Industrial Maintenance
Manufacturing
MMA 8.8.8 Hz mm
TIG
HOTSTART ANTISTICK
ARCFORCE VRD
| MODEL | ARC/MMA-500 | ARC/MMA-600 |
| Rated input voltage/Frequency | AC380V±15% 50/60Hz | AC380V±15% 50/60Hz |
| Rated input capacity(KVA) | 15.6 | 18.8 |
| Rated Input Power(kVA) | 23.7 | 28.6 |
| Rated output current (A) | 300A/32V | 350A/34V |
| Output curent range(A) | 20-300 | 20-350 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 70 | 70 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Usable electrode(mm) | 1.0-5.0 | 1.0-6.0 |
| Dimension(CM) | 40*23.1*337 | 40*23.1*337 |
| N.W. (KG) | 15 | 16 |
MULTI-PROCESSMIG WELDINGSYSTEMS
Versatile Solutions for Modern Fabrication
MIGwelding isoneof themost productivewelding processesavailable today.
Itshighdepositionrate,easeofoperation,andexcellentweldingqualitymakeitidealformanufacturing fabrication,automotiverepair,andindustrialproduction.
WODERMlGweldingsystemscombineadvancedinvertertechnologywithintelligentcontrolfunctions tomaximizeefficiencyandweldingperformance.
· MIG Welding
·Flux-CoredWelding
·Pulsed MIGWelding
·MMA Welding
· LiftTIGWelding
Advantages
·HigherProductivity
·Easier Operation
·LowerTrainingRequirements
· Consistent Weld Quality
·ReducedRework
MIG Series Multi-Process Welding Systems
| MODEL | MIG-135 |
| FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 4.2 |
| Rated output current (A) | 19 |
| Duty cyclef(%) | 35 |
| No-load voltage(V) | 60 |
| Output curent range(A) | 20-120 |
| Rated output voltage(V) | 13-21 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flowrate(L/MIN) | 8--18 |
| Torch cooling method | self cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class Cooling Method | F |
| Applicable welding wire diameter(mm) | air cooling |
| Dimension(CM) | 0.6-1.00 32*16*27 |
| N.W. (KG) | |
| 3.5 |
MIGSeries
Multi-Process Welding Systems
| MODEL | MIG-140 | MIG-160 | MIG-180 | MIG-200 |
| FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG | FLUX/MIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 220±15%50/60Hz | AC 220±15%50/60Hz | AC 220±15%50/60Hz | AC 220±15%50/60Hz |
| Rated input capacity(KVA) | 5 | 5.7 | 6.6 | 7.7 |
| Rated output current (A) | 22.7 | 26 | 30 | 35 |
| Duty cyclef(%) | 35 | 60 | 60 | 60 |
| No-load voltage(V) | 60 | 60 | 60 | 60 |
| Output curent range(A) | 20-140 | 20-160 | 20-180 | 20-200 |
| Rated output voltage(V) | 13-26 | 13-26 | 13-26 | 13-26 |
| Eficiency(%) | 80 | 80 | 80 | 80 |
| Wire feed type | auto. | auto. | auto. | auto. |
| Gas flow rate(L/MIN) | 8--18 | 8--18 | 8--18 | 8--18 |
| Torch cooling method | air cooling | air cooling | air cooling | air cooling |
| power factor | 0.93 | 0.93 | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S | IP21S | IP21S |
| Insulation class | F | F | F | F |
| Cooling Method | air cooling | air cooling | air cooling | air cooling |
| Applicable welding wire diameter(mm) | 0.6-1.00 | 0.6-1.00 | 0.6-1.00 | 0.6-1.00 |
| Dimension(CM) | 34*17.5*24 | 41.5*17.5*24 | 41.5*17.5*24 | 41.5*17.5*24 |
| N.W. (KG) | 6.7 | 6.8 | 7.2 | 7.2 |
MIG Series Pulsed Mig Welding Systems
AdvancedWeldingPerformance forProfessional Users
| MODEL | MIG-300 | MIG-315 |
| FLUX/MIG/MMA/LIFT TIG | MIG/PMIG/MMA/LIFT TIG | FMIG/PMIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC 380±15%50/60Hz | AC 380±15%50/60Hz |
| Rated input capacity(KVA) | 13 | 13 |
| Rated output current (A) | 19.5 | 19.5 |
| Duty cyclef(%) | 60 | 60 |
| No-load voltage(V) | 52 | 52 |
| Output curent range(A) | 30-300 | 30-315 |
| Rated output voltage(V) | 13-32 | 13-32 |
| Eficiency(%) | 80 | 80 |
| Wire feed type | auto. | auto. |
| Gas flow rate(L/MIN) | 8--20 | 8--20 |
| Torch cooling method | air cooling | air cooling |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Applicable welding wire diameter(mm) | 0.8-1.20 | 0.8-1.20 |
| Dimension(CM) | 59.4*31.4*51.9 | 59.4*31.4*51.9 |
| N.W. (KG) | 21 | 25 |
MIGSeries
Pulsed Mig Welding Systems
Advanced Welding Performance for Professional Users
Pulsed MIG technology provides superior arc control and significantly reduces spatter while maintaining excellent penetration.
■Ideal for applications requiring higher weld appearance standards and improved productivity.
KeyFeatures
Pulsed MIG Process Synergic Programs Digital Parameter Adjustment Stable Arc Control Excellent Bead Appearance Reduced Heat Input
Applications
mm m/Min 888.888 UFTG 1 1 2T MIX AR 0.8 1.0 MM MM SPOT GAS NO CO2 MM 2 MM
O p a
Welding Mask Earth clamp and cable Electrode holder MIG Torch
Brush & Hammer and cable 會 公 THREE-PHASE MMA MIG/MAG BURN BACK GAS/NOGAS WIRESPEED HEAVY DUTY
| MODEL | MIG-350 |
| FLUX/MIG/MMA/LIFTTIG | MIG/PMIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC380V±15%50/60Hz |
| Rated input capacity(KVA) | 15 |
| Rated output current (A) | 23 |
| Duty cyclef(%) | 60 |
| No-load voltage(V) | 65 |
| Output curent range(A) | 30-350 |
| Rated output voltage(V) | 14-40 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flow rate(L/MIN) | 8--20 |
| Torch cooling method | air cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class Cooling Method | F |
| Applicable welding wire diameter(mm) | air cooling |
| Dimension(CM) | 0.8-1.20 58.7x31.2x55.05 |
| N.W. (KG) | 26 |
MIG Series Pulsed Mig Welding Systems
AdvancedWeldingPerformance forProfessional Users
Pulsed MlG technology provides superior arc control and significantly reduces spatter while maintaining excellent penetration.
ldeal for applications requiring higher weld appearance standards and improved productivity.
KeyFeatures
? Pulsed MIG Process Synergic Programs Digital Parameter Adjustment ? Stable Arc Control Excellent Bead Appearance ? Reduced Heat Input
Applications
品
Stainless Steel Aluminum Fabrication Automotive Components Fabrication □ 1 0
Precision Manufacturing High-End Fabrication Projects
MIG mm m/Min 888.888
LFTTG 1 1 1 MIX AR 0.8 0 MM MM
SPOT NAS CO2 MM M6
| MODEL | MIG-500 |
| FLUX/MIG/MMA/LIFT TIG | MMIG/PMIG/MMA/LIFT TIG |
| Rated input voltage/Frequency | AC380V±15%50/60Hz |
| Rated input capacity(KVA) | 25 |
| Rated output current (A) | 38.5 |
| Duty cyclef(%) | 60 |
| No-load voltage(V) | 75 |
| Output curent range(A) | 30-500 |
| Rated output voltage(V) | 14-50 |
| Eficiency(%) | 80 |
| Wire feed type | auto. |
| Gas flow rate(L/MIN) | 8--25 |
| Torch cooling method | air cooling |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class Cooling Method | F |
| Applicable welding wire diameter(mm) | air cooling |
| Dimension(CM) | 0.8-1.60 61.3x31.2x60.05 |
| N.W. (KG) | |
| 35 |
MIG 500P Function: FLUX/MIG/MMA/LIFTTIG/PMIG
Industrial Digital Pulsed MlG Welding System
Built for industrial fabrication environments, the MIG-5ooP delivers exceptional welding performance, productivity, and reliability
Key Advantages
Advanced Pulsed MIG Technology Intelligent Digital Control ■High Duty Cycle Performance Excellent Arc Stability 1 Reduced Welding Deformation Suitable for Continuous Operation
Recommended Industries
鑫茶
Shipbuilding Pressure Vessel Structural Steel Manufacturing Fabrication 三 面 □ 品
Heavy Equipment Railway Equipment Industrial Construction
Manufacturing Production
CompleteWithMask&Accessories
| MODEL | MIG-500P |
| FLUX/MIG/MMA/LIFT TIG | MIG/PMIG/MMA/LIFT TIG |
| Ratedinput voltage/Frequency | AC380V±15%50/60Hz 25 |
| Rated input capacity(KVA) | |
| Rated output current (A) | |
| Duty cyclef(%) | |
| No-load voltage(V) | 30-500 |
| Output curent range(A) | |
| Rated output voltage(V) | |
| Eficiency(%) | 14-50 auto. |
| Wire feed type | |
| Gas flow rate(L/MIN) | |
| Torch cooling method | 8--25 air cooling |
| power factor | |
| Protect cass | IP21S |
| Insulation class | F |
| Cooling Method | water-cooling |
| Wire feeder dimensions(CM) | L*23*32 |
| Power source dimensions(CM) | L*32.5*53.4 |
| Water cooler dimensions(CM) | L*32.5*25.3 |
| Applicable welding wire diameter(mm) | 0.8-1.60MM |
| Dimension(CM) | 65.00*32.5*115 |
| N.W. (KG) | 62 |
? 0 O Welding Mask Earth clamp and cable Electrode holder MIG Torch Brush & Hammer and cable
MIG mm m/Min
PLASMACUTTINGSYSTEMS
Fast.Precise.Efficient.
Plasma cutting isone of themost efficientmethods for cutting conductive metals. Byutilizing high-temperatureplasmaarctechnology,WoDERplasmacuttingsystemsdeliver fastcutting speeds,cleancutting edges,and exceptional operating efficiency. Designedforbothindustrialandprofessionalapplications,WoDERplasmacuttersprovide reliableperformance forfabricationworkshops,maintenanceoperations,constructionprojects andmanufacturing facilities
Advantages
·High Cutting Speed
·Smooth Cutting Edge
·ReducedMaterialDistortion
·Easy Operation
·LowMaintenance Requirements
·Excellent Cost Efficiency
Applications
·MetalFabrication
·Construction
·Automotive Repair
·Equipment Manufacturing
·Agricultural Machinery
·Industrial Maintenance
CUTSeries
| MODEL | CUT-60 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 9.2 |
| Rated output current (A) | 41.8 |
| CUTOutputcurentrange(A) | 20-60 |
| MMA Output curent range(A) | 20-120 |
| no-load voltage(V) | 270 |
| Duty cyclef(%) | 60 |
| The cutter uses air pressure(Mpa) | 0.5-0.6 |
| Eficiency(%) | 80 |
| Max cutting thickness (MM) | 15 |
| Quality cuting thickness(MM) | 1--12 |
| Arcstarting method | High-frequency non-contact |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class | F |
| Cooling Method | air cooling |
| Dimension(CM) | 34*17.5*24 |
| N.W. (KG) | 6.5 |
| MODEL | CUT-100 | CUT-120 |
| Rated input voltage/Frequency | AC 380±15% 50/60Hz | AC 380±15% 50/60Hz |
| Rated input capacity(KVA) | 15.5 | 21.5 |
| Rated output current (A) | 23.5 | 32.5 |
| CUTOutput curent range(A) | 30-100 | 30-120 |
| MMA Output curent range(A) | 20-160 | 20-160 |
| no-load voltage(v) | 300 | 300 |
| Duty cyclef(%) | 60 | 60 |
| The cutter Usesair pressure(Mpa) | 0.6-0.7 | 0.65-0.75 |
| Eficiency(%) | 80 | 80 |
| Max cutting thickness(MM) | 30 | 35 |
| Quality cuting thickness (MM) | 1--25 | 1--30 |
| Arc starting method | High-frequency non-contact | High-frequency non-contact |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 61.3*31.2*60.05 | 61.3*31.2*60.05 |
| N.W. (KG) | 35 | 36 |
LGKSeries Industrial Plasma Cutting Solutions
Built for Productivityand Reliability
WODER industrial plasma cutting systems are engineered to deliver maximum productivity in demanding industrial environments. Designed for continuous operation, these machines provide precise cutting performance while maintaining exceptional durability and efficiency.
Key Benefits
? Heavy-Duty Performance Industrial Duty Cycle Superior Cutting Quality ? Enhanced Cooling System ■Long Service Life ? Reduced Operating Costs
Recommended Industries
将 鑫 A
Structural Steel Shipbuilding Pipeline Construction
Fabrication ” 酒 1 。
Heavy Equipment Industrial Metal Processing
Manufacturing Construction Facilities 8.8.8 POSTGAS PREGAS INTERNAL 4T EXTERNAL
| MODEL | LGK-80 |
| Rated input voltage/Frequency | AC 380±15% 50/60Hz |
| Rated input capacity(KVA) | 11.5 |
| Rated output current (A) | 17.5 |
| CUTOutputcurentrange(A) | 30-80 |
| MMA Output curent range(A) | 20-180 |
| no-load voltage(V) | 285 |
| Duty cyclef(%) | 60 |
| The cutter usesair pressure(Mpa) | 0.55-0.65 |
| Eficiency(%) | 80 |
| Max cutting thickness (MM) | 25 |
| Quality cuting thickness (MM) | 1--20 |
| Arcstarting method | High-frequency non-contact |
| power factor | 0.93 |
| Protect cass | IP21S |
| Insulation class Cooling Method | F |
| Dimension(CM) | air cooling |
| N.W. (KG) | 58.7*31.2*55.05 |
| 35 |
LGKSeries
Industrial Plasma Cutting Solutions
Built for Productivityand Reliability
WODER industrial plasma cutting systems are engineered to deliver maximum productivity in demanding industrial environments. Designed for continuous operation, these machines provide precise cutting performance while maintaining exceptional durability and eficiency.
Key Benefits
? Heavy-Duty Performance Industrial Duty Cycle Superior Cutting Quality Enhanced Cooling System Long Service Life ? Reduced Operating Costs
Recommended Industries
将 超雨 Structural Steel Shipbuilding Pipeline Construction Fabrication 8 酒 E Heavy Equipment Industrial Metal Processing Manufacturing Construction Facilities
m/Min GASCHECK 8.8.8 PREGAS POSTGAS INTERNAL EXTERNAL
| MODEL | LGK-100 | LGK-120 |
| Rated input voltage/Frequency | AC 380±15% 50/60Hz | AC 380±15% 50/60Hz |
| Rated input capacity(KVA) | 15.5 | 21.5 |
| Rated output current (A) | 23.5 | 32.5 |
| CUT Output curent range(A) | 30-100 | 30-120 |
| MMA Output curent range(A) | 20-230 | 20-230 |
| no-load voltage(V) | 300 | 300 |
| Duty cyclef(%) | 60 | 60 |
| Thecutter usesair pressure(Mpa) | 0.6-0.7 | 0.65-0.75 |
| Eficiency(%) | 80 | 80 |
| Max cutting thickness (MM) | 30 | 35 |
| Quality cuting thickness (MM) | 1--25 | 1-30 |
| Arc starting method | High-frequency non-contact | High-frequency non-contact |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S F | IP21S |
| Insulation class | F | |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 61.3x31.2×60.05 | 61.3x31.2×60.05 |
| N.W. (KG) | 45 | 46 |
DCINVERTERTIGWELDINGSYSTEMS Precision Welding for High-Quality Applications
TIGwelding isthepreferred processwhensuperiorweldappearance,precision, andcontrolarerequired.
Also knownas GTAW(Gas TungstenArc Welding),TlGwelding employsanon-consumable tungsten electrodeandshieldinggastoproduceultra-clean,slag-freeweldbeadswithminimalheatdistortion.
Itiswidelyadoptedfor high-standardweldingscenariosthatdemandexquisitefinishingandstrict workmanshiprequirements.
WODER DC inverter TIG welding machines integrate mature inverter control technology, enabling ultra-fine currentadjustmentand stable arc ignition.
TIG Series
Function: DC/PULSE/COLD/MMA
Core Advantages
| MODEL | TIG-140 | TIG-160 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 6.1 | 7.2 |
| Rated Input Power | 27.7 | 32.7 |
| Rated output current (A) | TIG26.7/MMA:43.8 | TIG28/MMA:45.2 |
| Rated output voltage | TIG:16.4/MMA:25.6 | TIG:16.4/MMA:26.4 |
| Duty cyclef(%) | 60 | 60 |
| Output curent range(A) | 20-140 | 20-160 |
| no-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | f | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 32*16*27 | 32*16*27 |
| ungsten electrode specifications(mm) | 2.4 | 2.4 |
| N.W. (KG) | 3.5 | 3.5 |
TIG Series
| MODEL | TIG-180 | TIG-200 |
| Rated input voltage/Frequency | AC 220±15% 50/60Hz | AC 220±15% 50/60Hz |
| Rated input capacity(KVA) | 8.4 | 9.6 |
| Rated Input Power | 38.2 | 43.6 |
| Rated output current (A) | TIG29.5/MMA:46.5 | TIG:34/MMA:46.5 |
| Rated output voltage | TIG:17.2/MMA:27.2 | TIG:18.2/MMA.27.2 |
| Duty cyclef(%) | 60 | 60 |
| Output curent range(A) | 20-180 | 20-200 |
| no-load voltage(V) | 60 | 60 |
| Eficiency(%) | 80 | 80 |
| power factor | 0.93 | 0.93 |
| Protect cass | IP21S | IP21S |
| Insulation class | F | F |
| Cooling Method | air cooling | air cooling |
| Dimension(CM) | 34*17.5*24 | 34*17.5*24 |
| ungsten electrode specifications(mm) N.W. (KG) | 3.2 3.8 | 3.2 3.8 |
Laser WeldingMachine
Function:MIG/MMA/TIG
Technical Characteristics
：Aircooled laser welder isa compact,low-maintenance,and highly portable solution ideal fo light to medium-duty welding tasks. It trades the ultimate power and continuous performance of water-cooled systems for superior convenience and operational simplicity Making it a perfect tool for jobshops,field service,and high-mix,low-volume precision manufacturing.
Capableofweldingwiderangeofmaterials
Carbon Steel
Stainless Steel
Copper
Aluminum
Applications
Easy operation:learn to use within 10 minutes
High welding efficiency.improve by 2-10 times
High weld quality:no deformation,no welding scar and no grinding
Suit for flat welding.fillet welding,vertical welding,
overlap welding and seal welding
Wide range of application:carbon steel,stainless steel,aluminum,
galvanized sheet,etc
Energysaving,high efficiency
Fast adjustment of welding gun:power,scanning width and wire
feeding speed can be adjusted
| MODEL | WD-1200 | WD-1500 |
| Laser power | 1200W | 1500w |
| Laser type | Fiber laser | Fiber laser |
| Laser wavelength | 1080±5nm | 1080±5nm |
| Maximumweldingdepth | Stainlessstel/irons3mmaluminium≤3mm | Stainless stel/irons5mmaluminium≤5mm |
| Positioning mode | Red ight positioning.coper nozle | Red ight positioning.coper nozle |
| Cooling mode | Ai-cooling | Ai-cooling |
| Welding gap requirements | ≤1mm | ≤1mm |
| Total power | 35KW | 55KW |
| Electricity demand | 220V±10%50/60Hz | 220V±10%50/60Hz |
| Lengthofmovable optical fiber line | 8M | 8M |
| Welding mode | Welding speed | Welding quality | Auxiliary materials | Welding environment |
| Laser welding | Very fast | Well | Wire fling needsSelf melting is not required | No specal requrements |
| TIG | Common | Common | Need | Need tungsten |
| MIG | Moderate | Common | Need | Need wire |
WHYWODER?
Driven by Innovation.Built for Performance.
ProfessionalWelding EquipmentManufacturer
AdvancedManufacturingFacilities
StrongR&D Capability
StrictQualityControl
OEM&ODMExpertise
GlobalExportExperience
ReliableAfter-SalesSupport ? UP
WODER
ProfessionalWelding&Cutting Solutions GUANGDONG WODER WELDINGTECHNOLOGYCO.,LTD. Tel:+86-13326916051/13531812796
Address:Zhongshan,Guangdong,China
Email:gdwoder@163.com
Http://www.woder.com.cn
