广东坚宝电缆有限公司Guangdong Jianbao Cable Co.,ltd
1. 特种电线电缆 Special Wire and Cable
1-1. 德标薄壁汽车电线DIN-standard thin-wall automotive wires
1-2. 日标薄壁汽车电线 JIS-standard thin-wall automotive wires
1-3. 美标薄壁汽车电线SAE-standard thin-wall automotive wires
1-4. 国标薄壁汽车电线GB (National Standard) Thin - Wall Automotive Wires
1-5. EV新能源汽车动力电线 Power Cables for EV New Energy Automobiles
1-6. 电动机车充电电缆 Charging Cables for Electric Motorcycles
1-7. 光伏电线 Photovoltaic Cables
1-8. 网络线Network Cables
1-9. 机器人拖链电缆Robot Drag Chain Cables
产 品 目 录Product Catalog
2. 新能源机车线束 New Energy Locomotive Harness
2-1. EV汽车动力高压线束 High - Voltage Wiring Harnesses for EV Power Systems
2-2. 电动车充电枪及充电座总成 EV Charging Guns and Charging Assemblies
2-3. 整车低压控制线束 Complete Vehicle and Low - Voltage Control Wiring Harnesses
2-4. 光伏线束 Photovoltaic Wiring Harnesses
2-5. 网络线线束 Network Cable Wiring Harnesses
2-6. 机器人拖链电缆线束Robot Drag Chain Cable Wiring Harnesses
2-7. 国标交直流充电桩GB (National Standard) AC/DC Charging Piles
u 依客户要求,定制各类特种电线电缆、线束。
1-1 德标薄壁汽车电线
DIN-standard thin-wall automotive wires
型 号:FLY FLYW FLYK FLRY-A FLRY-B 单芯超薄壁绝缘低压电线
Model : FLY FLYW FLYK FLRY-A FLRY-B Single-core Ultra-Thin Wall Insulated Low Voltage Wire
常 用 型 号:FLRY-A FLRY-B
Common Models:FLRY-A FLRY-B
FLRY-A :PVC 绝缘, 额定温度 -40℃~105℃
FLRY-A : PVC Insulation, Rated Temperature -40℃~105℃
FLRY-B :FLR4Y PA 绝缘, 额定温度 -40℃~105℃
FLRY-B : FLR4Y PA Insulation, Rated Temperature -40℃~105℃
FLR6Y ETFE 绝缘, 额定温度-40℃~200℃
FLR6Y ETFE Insulation, Rated Temperature -40℃~200℃
FLR9Y XLPE 绝缘, 额定温度 -40℃~125℃
FLR9Y XLPE Insulation , Rated Temperature-40℃~125℃
FLR13Y TPE 绝缘, 额定电压 -40℃~105℃
FLR13Y TPE Insulation , Rated Temperature-40℃~105℃
额 定 电 压:25 V
Rated Voltage:25V
引 用 标 准: ISO / 19642-1-1:2019, DIN /75521
Referenced Standards: ISO / 19642-1-1:2019 , DIN /75521
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-PVC绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, DIN/75521
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-PVC insulation.
-Rated temperature: -40 ℃~105℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019, DIN/75521
| 导体conductor | 绝缘Insulation | 最大导体电阻Max.CondResistance at20°C(Ω/km) | |||
| 面积Cross Section(mm) | 构造Construction(No/mm) | 线径Dia(mm) | 厚度Thickness(mm) | 外径OD(mm) | |
| 0.35 | 12/0.20 | 0.80 | 0.25 | 1.30 | 54.5 |
| 0.50 | 16/0.20 | 0.92 | 0.29 | 1.50 | 38.2 |
| 0.75 | 24/0.20 | 1.13 | 0.34 | 1.80 | 25.4 |
| 1.00 | 32/0.20 | 1.31 | 0.35 | 2.00 | 19.1 |
| 1.50 | 30/0.25 | 1.58 | 0.36 | 2.30 | 13.0 |
| 2.50 | 50/0.25 | 2.04 | 0.43 | 2.90 | 7.8 |
| 4.00 | 56/0.30 | 2.59 | 0.51 | 3.60 | 4.8 |
| 6.00 | 84/0.30 | 3.17 | 0.52 | 4.20 | 3.2 |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-PA绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, DIN/75521
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire
-PA insulation.
-Rated temperature: -40℃~ 105℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019, DIN/75521
| 导体conductor | 绝缘Insulation | 最大导体电阻Max.CondResistance at20°C(Ω/km) | |||
| 面积Cross Section(mm) | 构造Construction(No/mm) | 线径Dia(mm) | 厚度Thickness(mm) | 外径OD(mm) | |
| 0.35 | 12/0.21 | 0.90 | 0.20 | 1.40 | 52.00/54.5 |
| 0.50 | 16/0.21 | 1.00 | 0.22 | 1.60 | 37.10/38.20 |
| 0.75 | 24/0.21 | 1.20 | 0.24 | 1.90 | 24.70/25.40 |
| 1.00 | 32/0.21 | 1.35 | 0.24 | 2.10 | 18.50/19.10 |
| 1.50 | 30/0.26 | 1.70 | 0.24 | 2.40 | 12.70/13.00 |
| 2.50 | 50/0.26 | 2.20 | 0.28 | 3.00 | 7.60/7.80 |
| 4.00 | 56/0.31 | 2.75 | 0.32 | 3.70 | 4.70/4.80 |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-EIFE绝缘。
-额定温度:-40℃~200℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, DIN/75521
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-EIFE insulation.
-Rated temperature: -40℃~200℃
-Rated voltage: 25V
-Reference standard:ISO/19642-1:2019 , DIN/75521
| 导体conductor | 绝缘Insulation | 最大导体电阻Max.CondResistance at20°C(Ω/km) | |||
| 面积Cross Section(mm) | 构造Construction(No/mm) | 线径Dia(mm) | 厚度Thickness(mm) | 外径OD(mm) | |
| 0.35 | 12/0.21 | 0.90 | 0.20 | 1.20 | 54.4/55.5 |
| 0.50 | 16/0.21 | 1.00 | 0.22 | 1.40 | 37.1/38.2 |
| 0.75 | 24/0.21 | 1.20 | 0.24 | 1.70 | 24.7/24.4 |
| 1.00 | 32/0.21 | 1.35 | 0.24 | 1.90 | 18.5/19.1 |
| 1.50 | 30/0.26 | 1.70 | 0.24 | 2.20 | 12.7/13.0 |
| 2.50 | 50/0.26 | 2.20 | 0.28 | 2.70 | 7.6/7.82 |
| 4.00 | 56/0.31 | 2.75 | 0.32 | 3.40 | 4.71/4.85 |
| 6.00 | 81/0.31 | 3.30 | 0.32 | 4.00 | 3.14/3.14 |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-XLPE绝缘。
-额定温度:-40℃~125℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, DIN/75521
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-XLPE insulation.
-Rated temperature: -40℃~ 25℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019, DIN/75521
| 导体conductor | 绝缘Insulation | 最大导体电阻Max.CondResistance at20°C(Ω/km) | |||
| 面积Cross Section(mm) | 构造Construction(No/mm) | 线径Dia(mm) | 厚度Thickness(mm) | 外径OD(mm) | |
| 0.35 | 12/0.21 | 0.90 | 0.20 | 1.2/1.4 | 55.5 |
| 0.5 | 16/0.21 | 1.00 | 0.22 | 1.4/1.6 | 38.2 |
| 0.75 | 24/0.21 | 1.20 | 0.24 | 1.7/1.9 | 25.4 |
| 1.00 | 32/0.21 | 1.35 | 0.24 | 1.9/2.1 | 19.1 |
| 1.50 | 30/0.26 | 1.70 | 0.24 | 2.2/2.4 | 13.0 |
| 2.50 | 50/0.26 | 2.20 | 0.28 | 2.7/3.0 | 7.82 |
| 4.00 | 56/0.31 | 2.75 | 0.32 | 3.4/3.7 | 4.85 |
| 6.00 | 84/0.31 | 3.30 | 0.32 | 4.0/4.3 | 3.23 |
| 10.00 | 80/0.41 | 4.50 | 0.48 | 5.6/6.0 | 1.85 |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-TPE绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, DIN/75521
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-TPE insulation.
-Rated temperature: -40℃~ 105℃
-Rated voltage: 25V
-Reference standard: ,ISO/19642-1:2019 DIN/75521
| 导体conductor | 绝缘Insulation | 最大导体电阻Max.CondResistance at20°C(Ω/km) | |||
| 面积Cross Section(mm) | 构造Construction(No/mm) | 线径Dia(mm) | 厚度Thickness(mm) | 外径OD(mm) | |
| 0.35 | 12/0.21 | 0.9 | 0.20 | 1.2/1.4 | 52.0 |
| 0.50 | 16/0.21 | 1.0 | 0.22 | 1.4/1.6 | 37.1 |
| 0.75 | 24/0.21 | 1.2 | 0.24 | 1.7/1.9 | 24.7 |
| 1.00 | 32/0.21 | 1.35 | 0.24 | 1.9/2.1 | 18.5 |
| 1.50 | 30/0.26 | 1.7 | 0.24 | 2.2/2.4 | 12.7 |
| 2.00 | 30/0.31 | 2.0 | 0.28 | 2.5/2.8 | 9.42 |
| 2.50 | 50/0.26 | 2.2 | 0.28 | 3.7/3.0 | 7.60 |
| 4.00 | 56/0.31 | 2.75 | 0.32 | 3.4/3.7 | 4.71 |
| 6.00 | 84/0.31 | 3.3 | 0.32 | 4.0/4.3 | 3.14 |
1-2 日标汽车薄壁汽车电线
JIS-standard thin-wall automotive wires
型 号:AV AVS AVSS CAVS AVX AEX AEXS AEXSS 单芯超薄壁绝缘低压电线
Model : AV AVS AVSS CAVS AVX AEX AEXS AEXSS Single-core Ultra-Thin Wall Insulated Low Voltage Wire
常 用 型 号: AV AVS AVSS AVX AEXS AEXSS
Common Models:AV AVS AVSS AVX AEXS AEXSS
AV AVS AVSS :PVC 绝缘, 额定温度 -40℃~105℃
AV AVS AVSS :PVC Insulation, Rated Temperature -40℃~105℃
AVX : XLPVC 绝缘, 额定温度 -40℃~105℃
AVX : XLPVC Insulation, Rated Temperature -40℃~105℃
AEX AEXS AEXSS : XLPE 绝缘, 额定温度-40℃~125℃
AEX AEXS AEXSS : XLPE Insulation, Rated Temperature -40℃~125℃
额 定 电 压:25 V
Rated Voltage:25V
引 用 标 准:ISO / 6722 -1:2011, JASO / D611 -2009 D618-2008
Referenced Standards: ISO / 6722 -1:2011, JASO / D611 -2009 D618-2008
日标薄壁汽车电线 AVJIS-standard thin-wall automotive wires
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-PVC绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire.
-PVC insulation.
-Rated temperature: -40℃~105℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019,
JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | |
| 根数 | 线径/mm | |||||
| 导体类型(mm²) | Wirecore数量 | 线径 | 导体外径 | 绝缘厚度 | 电线0.D | 最大Cond.resistance |
| 2.0f | 37 | 0.26 | 1.80 | 0.60 | 3.20 | 9.50 |
| 3.0 | 58 | 0.26 | 2.30 | 0.70 | 3.90 | 6.06 |
| 61 | 0.26 | 2.40 | 0.70 | 3.90 | 5.76 | |
| 5.0f | 7/9 | 0.32 | 3.10 | 0.80 | 4.70 | 3.71 |
| 7/30 | 0.18 | 3.40 | 0.80 | 4.70 | 3.56 | |
| 8.0f | 7/22 | 0.26 | 4.20 | 0.90 | 5.70 | 3.32 |
| 9.0f | 7/16 | 0.32 | 4.20 | 1.00 | 6.40 | 2.09 |
| 10.0f | 19/6 | 0.32 | 4.20 | 1.00 | 6.60 | 2.05 |
| 10.0 | 62 | 0.45 | 4.10 | 0.90 | 6.60 | 1.87 |
| 63 | 0.450 | 4.50 | 1.00 | 6.60 | 1.84 | |
| 7/9 | 0.450 | 4.50 | 1.00 | 6.60 | 1.84 | |
| 15.0f | 19/9 | 0.32 | 5.30 | 1.10 | 7.50 | 1.37 |
日标薄壁汽车电线 AVSJIS-standard thin-wall automotive wires
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-PVC绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire.
-PVC insulation.
-Rated temperature: -40℃~105℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019,
JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | ||||
| 根数 | 线径/mm | ||||||||
| Wiretype (mm²) | Wirecoreqty | wirediameter | Conductorouterdiameter | Insulationthickness | Wire0.D | MaxCond.resistance | |||
| 0.3 | 7 | 0.26 | 0.80 | 1.85 | 50.20 | ||||
| 0.3f | 15 | 0.18 | 0.80 | 1.85 | 48.90 | ||||
| 0.5f | 20 | 0.18 | 1.00 | 2.05 | 36.70 | ||||
| 0.5 | 7 | 0.32 | 1.00 | 0.5 | 2.05 | 32.70 | |||
| 0.75f | 30 | 0.18 | 1.20 | 2.20 | 24.40 | ||||
| 0.85 | 16 | 0.26 | 1.20 | 2.30 | 22.00 | ||||
| 11 | 0.32 | 1.20 | 2.30 | 10.80 | |||||
| 1.25f | 50 | 0.18 | 1.50 | 2.55 | 14.70 | ||||
| 1.25 | 16 | 0.32 | 1.50 | 2.55 | 14.30 | ||||
| 2.0f | 37 | 0.26 | 1.90 | 3.00 | 9.50 | ||||
| 2.0 | 26 | 0.32 | 1.90 | 3.00 | 8.81 | ||||
| 3.0f | 58 | 0.26 | 2.30 | 0.6 | 3.70 | 6.06 | |||
| 61 | 0.26 | 2.30 | 3.70 | 5.76 | |||||
| 3.0 | 41 | 0.32 | 2.40 | 3.70 | 5.59 | ||||
日标薄壁汽车电线 AVSS JIS-standard thin-wall automotive wires
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-PVC绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire.
-PVC insulation.
-Rated temperature: -40℃~105℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019,
JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | |
| 根数 | 线径/mm | |||||
| 仪表(AWG) | Wirecore数量 | 线径 | 导体外径 | 绝缘厚度 | 电线0.D | 最大Cond. resistance |
| 0.22 | 7 | 0.20 | 0.60 | 0.30 | 1.3 | 84.80 |
| 0.30 | 7 | 0.26 | 0.80 | 1.45 | 50.20 | |
| 0.3f | 19 | 0.16 | 1.45 | 48.80 | ||
| 0.5f | 19 | 0.19 | 1.00 | 1.65 | 34.60 | |
| 0.50 | 7 | 0.32 | 1.65 | 32.70 | ||
| 0.75f | 7 | 0.23 | 1.20 | 1.8 | 23.60 | |
| 0.85 | 19 | 0.24 | 1.9 | 21.70 | ||
| 7 | 0.40 | 1.10 | 1.9 | 20.80 | ||
| 1.25 | 19 | 0.29 | 1.50 | 2.1 | 14.90 | |
| 1.25f | 37 | 0.21 | 2.1 | 14.60 | ||
| 2.0f | 37 | 0.26 | 1.80 | 0.40 | 2.75 | 9.50 |
| 2.0 | 19 | 0.37 | 1.90 | 2.75 | 9.00 | |
日标薄壁汽车电线 AVXJIS-standard thin-wall automotive wires
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-XLPVC绝缘。
-额定温度:-40℃~105℃
-额定电压:25V
-引用标准:ISO/19642-1:2019, JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire.
-XLPVC insulation.
-Rated temperature: -40℃~105℃
-Rated voltage: 25V
-Reference standard:ISO/19642-1:2019
JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | |
| 根数 | 线径/mm | |||||
| 线型(mm²) | Wirecore数量 | 线径 | 导体外径 | 绝缘厚度 | 电线0.D | 最大Cond.resistance |
| 0.5f | 20 | 0.180 | 1.00 | 0.5 | 2.00 | 36.7 |
| 0.5 | 7 | 0.320 | 1.00 | 2.00 | 32.7 | |
| 0.75f | 30 | 0.180 | 1.20 | 2.20 | 24.4 | |
| 0.85 | 11 | 0.320 | 1.20 | 2.30 | 20.8 | |
| 1.25f | 50 | 0.180 | 1.50 | _ | 2.70 | 14.7 |
| 1.25 | 16 | 0.320 | 1.50 | 0.6 | 2.70 | 14.3 |
| 2.0f | 37 | 0.260 | 1.80 | 3.10 | 9.5 | |
| 2.0 | 26 | 0.320 | 1.90 | 3.10 | 8.81 | |
| 3.0 | 41 | 0.320 | 2.40 | 0.7 | 3.80 | 5.59 |
| 5.0f | 98 | 0.260 | 3.00 | 0.8 | 4.70 | 3.59 |
| 5.0 | 65 | 0.320 | 3.00 | 4.70 | 3.52 | |
| 8.0 | 50 | 0.450 | 3.70 | 5.60 | 2.52 | |
| 8.0f | 154 | 0.260 | 4.00 | 5.60 | 2.33 | |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-XLPE绝缘。
-额定温度:-40℃~25℃
-额定电压:25V
-引用标准:ISO/19642-1:2019 JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire.
-XLPE insulation.
-Rated temperature: -40℃~125℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019 JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | ||
| 根数 | 线径/mm | ||||||
| 线型(mm²) | Wirecore数量 | 线径 | 导体外径 | 绝缘厚度 | 最小外径 | 最大外径 | 裸铜 |
| 最大Cond.resistance | |||||||
| 0.5f | 20 | 0.18 | 1.00 | 0.50 | 2.0 | 2.2 | 36.7 |
| 0.5 | 7 | 0.32 | 2.0 | 2.2 | 32.7 | ||
| 0.75f | 30 | 0.18 | 1.20 | 2.2 | 2.4 | 24.4 | |
| 0.85 | 11 | 0.32 | 2.2 | 2.4 | 20.8 | ||
| 1.25f | 50 | 0.18 | 1.50 | 0.60 | 2.7 | 2.9 | 14.7 |
| 1.25 | 16 | 0.32 | 2.7 | 2.9 | 14.3 | ||
| 2.0f | 37 | 0.26 | 1.80 | 3.2 | 3.4 | 9.5 | |
| 2.0 | 26 | 0.32 | 1.90 | 3.1 | 3.4 | 8.81 | |
| 3.0 | 41 | 0.32 | 2.40 | 0.70 | 3.8 | 4.1 | 5.59 |
| 5.0 | 65 | 0.32 | 3.00 | 0.80 | 4.6 | 4.9 | 3.52 |
| 8.0 | 50 | 0.45 | 3.70 | 0.80 | 5.3 | 5.6 | 2.32 |
日标薄壁汽车电线 AEXS JIS-standard thin-wall automotive wires
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-XLPE绝缘。
-额定温度:-40℃~125℃
-额定电压:25V
-引用标准:ISO/19642-1:2019
JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire.
-XLPE insulation.
-Rated temperature: -40℃~125℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019
JASO /D611 -2009 D618-2008
| 线规Gauge(mm2) | 导体条数/线径ConstructiNo./mm | 绞合导体标称直径Nom. Dia.of StrandedConductor | 电线直径.Wire Diam. | 最大电阻(直流,20°C) 0hm/KmMax. Resistance(dc at 20° C)0hm/Km | |||||
| 英寸Inch | 毫米mm | 英寸Inch | 毫米mm | 1000-英尺1000-(ft) | 千米Km | ||||
| Nom.Fin. | Max. | Nom.Fin. | Max. | ||||||
| 0.30 | 7/0.26 | .0315 | 0.80 | .0551 | .0591 | 1.40 | 1.50 | 15.30 | 50.20 |
| 0.50 | 7/0.32 | .0394 | 1.00 | .0630 | .0669 | 1.60 | 1.70 | 9.97 | 32.70 |
| 0.85 | 19/0.24 | .0472 | 1.20 | .0709 | .0748 | 1.80 | 1.90 | 6.61 | 21.70 |
| 7/0.40 | .0433 | 1.10 | .0709 | .0748 | 1.80 | 1.90 | 6.34 | 20.80 | |
| 1.25 | 19/0.29 | .0591 | 1.50 | .0827 | .0866 | 2.10 | 2.20 | 4.54 | 14.90 |
| 2.00 | 19/0.37 | .0748 | 1.90 | .1063 | .1102 | 2.70 | 2.80 | 2.74 | 9.00 |
| 3.00 | 41/0.32 | .0945 | 2.40 | .1417 | .1496 | 3.60 | 3.80 | 1.70 | 5.59 |
| 0.30f | 19/0.16 | .0315 | 0.80 | .0551 | .0591 | 1.40 | 1.50 | 14.87 | 48.80 |
| 0.50f | 19/0.19 | .0394 | 1.00 | .0630 | .0669 | 1.60 | 1.70 | 10.55 | 34.60 |
| 0.75f | 19/0.23 | 0.0472 | 1.20 | 0.0709 | 0.0748 | 1.80 | 1.90 | 7.19 | 23.60 |
| 1.25f | 37/0.21 | 0.0591 | 1.50 | 0.0827 | 0.0866 | 2.10 | 2.20 | 4.45 | 14.60 |
| 2.00f | 37/0.26 | 0.0709 | 1.80 | 0.1063 | 0.1102 | 2.70 | 2.80 | 2.90 | 9.50 |
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-XLPE绝缘。
-额定温度:-40℃~125℃
-额定电压:25V
-引用标准:ISO/19642-1:2019
JASO /D611 -2009 D618-2008
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire.
-XLPE insulation.
-Rated temperature: -40℃~125℃
-Rated voltage: 25V
-Reference standard: ISO/19642-1:2019 JASO /D611 -2009 D618-2008
| 导体线规(mm²) | 导体结构 | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) | 最大导体电阻(Ω/km) | |
| 根数 | 线径/mm | |||||
| 线型(mm²) | Wirecore数量 | 线径 | 导体外径 | 绝缘厚度 | 电线0.D | 裸铜 |
| 最大Cond.resistance | ||||||
| 0.22 | 7 | 0.2 | 0.6 | 0.3 | 1.2 | 84.4 |
| 0.30 | 19 | 0.16 | 0.8 | 0.3 | 1.4 | 48.8 |
| 0.50 | 19 | 0.19 | 1.0 | 0.3 | 1.6 | 34.6 |
| 0.75 | 19 | 0.23 | 1.2 | 0.3 | 1.8 | 23.6 |
| 1.25 | 37 | 0.21 | 1.5 | 0.3 | 2.1 | 14.6 |
| 2.00 | 27 | 0.26 | 1.8 | 0.4 | 2.6 | 9.5 |
| 2.50 | 50 | 0.26 | 2.1 | 0.4 | 2.9 | 7.6 |
1-3 美标薄壁汽车电线SAE-standard thin-wall automotive wires
型 号:TWP GPT SGT TXL GXL SXL 单芯超薄壁绝缘低压电线
Model : TWP GPT SGT TXL GXL SXL Single-core Ultra-Thin Wall Insulated Low Voltage Wire
Common Models:GPT SGT TXL GXL
TWP GPT SGT :PVC 绝缘, 额定温度 -40℃~80℃
TWP GPT SGT :PVC Insulation, Rated Temperature -40℃~80℃
TXL : XLPE 绝缘, 额定温度 -40℃~105℃
TXL : XLPE Insulation, Rated Temperature -40℃~105℃
GXL SXL : XLPE 绝缘, 额定温度-40℃~125℃
额 定 电 压:30V/AC 60V/DC
Rated Voltage:30V/AC 60V/DC
引 用 标 准:ISO / 6722 -1:2011 JAE / J1128 :2000
Referenced Standards: ISO / 6722 -1:2011 JAE / J1128 :2000
UL 758 标 准: UL3656 UL3271 UL3266 UL3321 UL4478
UL 758 Standard: UL3656 UL3271 UL3266 UL3321 UL4478
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-PVC绝缘。
-额定温度:-40℃~80℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/19642-1:2019 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper. -PVC insulation.
-Rated temperature: -40℃~80℃
-Rated voltage: 30V/AC 60V/DC
-Reference standard:ISO/19642-1:2019 JAE/J1128:2000
-PVC 绝缘
| 导体 | 绝缘 | 成缆 | ||||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 最小绝缘厚度 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM | MM |
| 22 | 1×0.35 | 7/0.25 | 0.76 | 0.28 | 0.40 | 1.70 |
| 20 | 1×0.50 | 7/0.32 | 0.97 | 0.28 | 0.40 | 1.90 |
| 18 | 1×0.80 | 16/0.25 | 1.17 | 0.28 | 0.40 | 2.20 |
| 18 | 1×0.80 | 19/0.23 | 1.17 | 0.28 | 0.40 | 2.20 |
| 16 | 1×1.00 | 19/0.28 | 1.45 | 0.28 | 0.40 | 2.40 |
| 14 | 1×2.00 | 19/0.36 | 1.80 | 0.28 | 0.40 | 2.70 |
| 12 | 1×3.00 | 19/0.45 | 2.29 | 0.32 | 0.46 | 3.30 |
| 10 | 1×5.00 | 19/0.57 | 2.87 | 0.35 | 0.50 | 4.00 |
| 8 | 1×8.00 | 49/0.46 | 4.06 | 0.39 | 0.55 | 4.90 |
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-PVC绝缘。
-额定温度:-40℃~80℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/19642-1:2019 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper. -PVC insulation.
-Rated temperature: -40℃~80℃
-Rated voltage:30V/AC 60V/DC
-Reference standard:ISO/19642-1:2019 JAE/J1128:2000
| 导体 | 绝缘 | 成缆 | ||||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 最小绝缘厚度 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM | MM |
| 22 | 1×0.35 | 7/0.25 | 0.76 | 0.58 | 2.10 | |
| 20 | 1×0.50 | 7/0.32 | 0.97 | 0.41 | 0.58 | 2.40 |
| 18 | 1×0.80 | 16/0.25 | 1.17 | 0.41 | 0.58 | 2.50 |
| 18 | 1×0.80 | 19/0.23 | 1.17 | 0.41 | 0.58 | 2.50 |
| 16 | 1×1.00 | 19/0.28 | 1.45 | 0.41 | 0.58 | 2.90 |
| 14 | 1×2.00 | 19/0.36 | 1.80 | 0.41 | 0.58 | 3.20 |
| 12 | 1×3.00 | 19/0.45 | 2.29 | 0.46 | 0.66 | 3.80 |
| 10 | 1×5.00 | 19/0.57 | 2.87 | 0.55 | 0.79 | 4.70 |
| 8 | 1×8.00 | 19/0.73 | 3.26 | 0.66 | 0.94 | 6.00 |
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-PVC绝缘。
-额定温度:-40℃~80℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/19642-1:2019 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper. -PVC insulation.
-Rated temperature: -40℃~80℃
-Rated voltage:30V/AC 60V/DC
-Reference standard: ISO/19642-1:2019 JAE/J1128:2000
| 导体 | 绝缘 | 成缆 | |||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM |
| 6 | 1×13.48 | 266/0.26 | 4.12 | 1.52 | 6.58 |
| 4 | 1×21.28 | 420/0.26 | 6.72 | 1.65 | 9.40 |
| 2 | 1×33.70 | 665/0.26 | 8.58 | 1.65 | 11.26 |
| 1 | 1×42.36 | 836/0.26 | 9.77 | 1.65 | 12.45 |
| 1/0 | 1×53.91 | 1064/0.26 | 11.10 | 1.65 | 13.78 |
| 2/0 | 1×67.04 | 1323/0.26 | 12.47 | 1.65 | 15.15 |
| 3/0 | 1×84.42 | 1666/0.26 | 14.10 | 1.98 | 17.30 |
| 4/0 | 1×106.76 | 2107/0.26 | 15.97 | 1.98 | 19.17 |
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-XLPE绝缘。
-额定温度:-40℃~105℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/19642-1:2019 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper.
-XLPE insulation.
-Rated temperature: { \displaystyle - 4 0 ^ { \circ } C { ~ } 1 0 5 ^ { \circ } C }
-Rated voltage:30V/AC 60V/DC
-Reference standard: ISO/19642-1:2019 JAE/J1128:2000
| 导体 | 绝缘 | 成缆 | ||||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 最小绝缘厚度 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM | MM |
| 22 | 1×0.35 | 7/0.25 | 0.76 | 0.28 | 0.40 | 1.70 |
| 20 | 1×0.50 | 7/0.32 | 0.97 | 0.28 | 0.40 | 1.90 |
| 20 | 1×0.50 | 19/0.19 | 0.95 | 0.28 | 0.40 | 1.90 |
| 18 | 1×0.80 | 16/0.25 | 1.17 | 0.28 | 0.40 | 2.20 |
| 18 | 1×0.80 | 19/0.23 | 1.17 | 0.28 | 0.40 | 2.20 |
| 16 | 1×1.00 | 19/0.28 | 1.45 | 0.28 | 0.40 | 2.40 |
| 14 | 1×2.00 | 19/0.36 | 1.80 | 0.28 | 0.40 | 2.70 |
| 12 | 1×3.00 | 19/0.45 | 2.29 | 0.32 | 0.46 | 3.30 |
| 10 | 1×5.00 | 19/0.57 | 2.87 | 0.35 | 0.50 | 4.00 |
| 10 | 1×5.00 | 100/0.26 | 3.00 | 0.35 | 0.45 | 3.90 |
| 8 | 1×8.00 | 49/0.46 | 4.06 | 0.39 | 0.55 | 4.90 |
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-XLPE绝缘。
-额定温度:-40℃~125℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/19642-1:2019 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper.
-XLPE insulation.
-Rated temperature: -40℃~125℃
-Rated voltage:30V/AC 60V/DC
-Reference standard:ISO/19642-1:2019 JAE/J1128:2000
| 导体 | 绝缘 | 成缆 | ||||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 最小绝缘厚度 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM | MM |
| 22 | 1×0.50 | 19/0.20 | 0.97 | 0.41 | 0.58 | 2.40 |
| 18 | 1×0.80 | 19/0.23 | 1.17 | 0.41 | 0.58 | 2.50 |
| 18 | 1×0.80 | 16/0.25 | 1.17 | 0.41 | 0.58 | 2.50 |
| 16 | 1×1.00 | 19/0.24 | 1.45 | 0.41 | 0.58 | 2.90 |
| 14 | 1×2.00 | 19/0.36 | 1.80 | 0.41 | 0.58 | 3.20 |
| 12 | 1×3.00 | 19/0.45 | 2.29 | 0.46 | 0.66 | 3.80 |
| 10 | 1×5.00 | 19/0.57 | 2.87 | 0.56 | 0.79 | 4.70 |
主要技术资料
-导体:单根或绞合40\~10AWG镀锡或裸铜丝。
-XLPE(交联聚乙烯)绝缘。
-额定温度:150℃
-额定电压:300V
-通过UL VW-1 —CUL FT1 垂直燃烧或符合无卤要求
-用于一般汽车电子,电器设备内部连接线
Techniacl Data
-Conductor: Single or stranded 40\~10AWG tinned or bare copper wire.
-XLPE (Cross-linked polyethylene) insulation.
-Rated temperature: 150℃
-Rated voltage: 300V
-Compliance with UL VW-1 and CUL FT1 vertical flame test or meets halogen-free requirements.
-Application: For internal wiring in general electronic and electrical equipment.
| UL型号 | 导体线规(AWG) | 导体结构Conductor | 导体外径(mm) | 绝缘厚度(mm) | 电缆外径(mm) |
| UL TYPE | Gauge (AWG) | Construction(no/mm) | Conductorouterdiameter(mm) | Insulationthickness(mm) | Wire 0.D(mm) |
| UL3656 | 28 | 7/0.127 | 0.38 | 0.80 | |
| 26 | 7/0.160 | 0.48 | 0.90 | ||
| 24 | 11/0.160 | 0.61 | 1.00 | ||
| 22 | 17/0.160 | 0.76 | 0.20 | 1.20 | |
| 20 | 26/0.160 | 0.94 | 1.40 | ||
| 18 | 41/0.160 | 1.17 | 1.70 | ||
| 16 | 26/0.254 | 1.49 | 2.00 |
主要技术资料
-导体:26AWG-12AWG。
-导体使用单支或绞合裸铜、镀锡铜-XLPE(交联聚乙烯)绝缘。
-额定温度:125℃
-额定电压:600V
-使用标准厚度,易剥,截断容易。
-可通过FT2燃烧测试。
-适用于一般汽车电子,电器设备内部连接线
Techniacl Data
-Conduct: 26AWG-12AWG.
-Tinned,annesled,standed or solid copper codnuctor.
-XLPE (Cross-linked polyethylene) insulation.
-Rated temperature: 125℃
-Rated voltage: 600V
-Uniform thickness of wire to ensure easy strippingand cutting.
-Passes FT2flame test.
-For general purpose internal wiring of appl iance.
| ULStyle&CSA Type | 导体Conductor | 绝缘Insulation | 标准长度StandPut-up | 最大电阻(Q/km)MaximunResistance at 20℃ | |||
| 线规AWG | 线数/线径NO./mm | 平均厚度(mm)Nom. Thick. | 外径(mm)Nom. Dia | 英制Ft/Coil | 公制M/Coil | ||
| UL3271Standed)绞线 | 26 | 7/0.16 | 0.80 | 2.10 | 2000 | 610 | 150.00 |
| 24 | 11/0.16 | 0.79 | 2.20 | 2000 | 610 | 94.20 | |
| 22 | 17/0.16 | 0.82 | 2.40 | 2000 | 610 | 59.40 | |
| 20 | 26/0.16 | 0.83 | 2.60 | 2000 | 610 | 36.70 | |
| 18 | 41/0.16 | 0.81 | 2.80 | 2000 | 610 | 23.20 | |
| 16 | 26/0.25 | 0.81 | 3.10 | 2000 | 610 | 15.00 | |
| 14 | 41/0.25 | 0.82 | 3.50 | 2000 | 610 | 9.30 | |
| 12 | 65/0.25 | 0.84 | 4.00 | 2000 | 610 | 5.70 | |
美标薄壁汽车电线 UL758标准:UL3266
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-XLPE(交联聚乙烯)绝缘。
-额定温度:125℃
-额定电压:300V
-可通过UL VW-1及CUL FT1或FT2燃烧测试
-用于汽车电子、电器设备内部配线
Techniacl Data
-Tinned,annesled,standed or solid copper codnuctor.
-XLPE (Cross-linked polyethylene) insulation.
-Rated temperature: 1 2 5 { { } ^ { \circ } C }
-Rated voltage: 300V
-Passes UL VW-1&CUL FT1 or FT2flame test.
-Executed standard:UL758,UL1581,CSA22.2
-For general purpose internal wiring of electronic and electrical equipment.
| ULStyle&CUL Type | 14导体Conductor | 绝缘Insulation | 标准长度StandPut-up | 最大电阻(Q/km)MaximunResistance at 20℃ | |||
| 线规AWG | 线数/线径NO./mm | 平均厚度(mm)Nom.Thick. | 外径(mm)Nom. Dia | 英制Ft/Coil | 公制M/Coil | ||
| UL3266Standed)绞线 | 30 | 7/0.10 | 0.40 | 1.10 | 2000 | 610 | 381.00 |
| 28 | 7/0.127 | 0.41 | 1.20 | 2000 | 610 | 239.00 | |
| 26 | 7/0.16 | 0.41 | 1.30 | 2000 | 610 | 150.00 | |
| 24 | 11/0.16 | 0.40 | 1.40 | 2000 | 610 | 94.20 | |
| 22 | 17/0.16 | 0.42 | 1.60 | 2000 | 610 | 59.40 | |
| 20 | 26/0.16 | 0.40 | 1.75 | 2000 | 610 | 36.70 | |
| 18 | 41/0.16 | 0.41 | 2.00 | 2000 | 610 | 23.20 | |
| 16 | 26/0.25 | 0.42 | 2.30 | 2000 | 610 | 15.00 | |
| 14 | 41/0.25 | 0.48 | 2.80 | 2000 | 610 | 9.30 | |
| 12 | 65/0.25 | 0.54 | 3.40 | 2000 | 610 | 5.70 | |
| 10 | 105/0.25 | 0.53 | 4.00 | 2000 | 610 | 3.60 | |
| UL3266(Solid)单股 | 28 | 1/0.32 | 0.39 | 1.10 | 2000 | 610 | 227.00 |
| 26 | 1/0.404 | 0.40 | 1.20 | 2000 | 610 | 143.00 | |
| 24 | 1/0.50 | 0.40 | 1.30 | 2000 | 610 | 89.30 | |
| 22 | 1/0.643 | 0.40 | 1.40 | 2000 | 610 | 56.40 | |
| 20 | 1/0.813 | 0.40 | 1.60 | 2000 | 610 | 35.20 | |
| 18 | 1/1.024 | 0.40 | 1.80 | 2000 | 610 | 22.20 | |
■美标汽车薄壁汽车电线 UL758标准:UL3321
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-XLPE(交联聚乙烯)绝缘。
-额定温度:125℃
-额定电压:300V
-可通过UL VW-1及CUL FT1或FT2燃烧测试。
-用于汽车电子、电器设备内部配线。
Techniacl Data
-Tinned,annesled,standed or solid copper codnuctor.
-XLPE (Cross-linked polyethylene) insulation.
-Rated temperature: 125℃
-Rated voltage: 300V
-Passes UL VW-1&CUL FT1 or FT2flame test. -Executed standard:UL758,UL1581,CSA22.2
-For general purpose internal wiring of electronic and electrical equipment.
| UL | 14导体Conductor | 绝缘Insulation | 标准长度Stand Put-up | 最大电阻(Q/km)MaximunResistance at 20℃ | |||
| Style&CULType | 线规AWG | 线数/线径NO./mm | 平均厚度(mm)Nom.Thick. | 外径(mm)Nom. Dia | 英制Ft/Coil | 公制M/Coil | |
| UL3321Standed)绞线 | 30 | 7/0.10 | 0.80 | 1.90 | 2000 | 610 | 381.00 |
| 28 | 7/0.127 | 0.80 | 2.00 | 2000 | 610 | 239.00 | |
| 26 | 7/0.16 | 0.80 | 2.10 | 2000 | 610 | 150.00 | |
| 24 | 11/0.16 | 0.79 | 2.20 | 2000 | 610 | 94.20 | |
| 22 | 17/0.16 | 0.82 | 2.40 | 2000 | 610 | 59.40 | |
| 20 | 26/0.16 | 0.78 | 2.50 | 2000 | 610 | 36.70 | |
| 18 | 41/0.16 | 0.81 | 2.80 | 2000 | 610 | 23.20 | |
| 16 | 26/0.25 | 0.81 | 3.10 | 1000 | 610 | 15.00 | |
| 14 | 41/0.25 | 0.82 | 3.50 | 1000 | 305 | 8.96 | |
| 12 | 65/0.25 | 0.84 | 4.00 | 1000 | 305 | 5.64 | |
| 10 | 105/0.25 | 0.82 | 4.60 | 1000 | 305 | 3.55 | |
| 6 | 266/0.25 | 1.50 | 7.70 | 1000 | 305 | 1.40 | |
| UL3321(Top-coated)先绞后镀 | 26 | 7/0.16 | 0.76 | 2.10 | 2000 | 610 | 150.00 |
| 24 | 7/0.20 | 0.76 | 2.20 | 2000 | 610 | 94.20 | |
| 22 | 7/0.25 | 0.76 | 2.40 | 2000 | 610 | 59.40 | |
| 20 | 7/0.32 | 0.76 | 2.50 | 2000 | 610 | 36.70 | |
| 18 | 7/0.39 | 0.76 | 2.80 | 2000 | 610 | 23.20 | |
| 16 | 7/0.50 | 0.76 | 3.10 | 1000 | 305 | 14.60 | |
■美标薄壁汽车电线 UL758标准:UL4478
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-额定温度:105℃
-额定电压:300V
-XLPE(交联聚乙烯)绝缘。
-可通过UL VW-1及CUL FT1或FT2燃烧测试。
-用于电子、电器、电脑设备内部连接。
Techniacl Data
-Tinned,annesled,standed or solid copper codnuctor.
-Rated temperature: 1 0 5 { { ^ \circ C } }
-Rated voltage: 300V
-XLPE (Cross-linked polyethylene) insulation.
-Passes UL VW-1&CUL FT1 or FT2flame test.
-Internal wiring of appliances.
| ULStyle | 导体Conductor | 绝缘Insulation | 芯线数量NONO. ofcore | 间距(mm)Pitch | 最大电阻(Q/km)MaximunResistanceat 20℃ | ||
| 线规AWG | 线数/线径NO./mm | 平均厚度(mm)Nom. Thick. | 线数/线径NO./mm | ||||
| UL4478(Standed)绞线 | 26 | 7/0.16 | 0.25 | 1.00 | 2P-12P | 1.27 | 150.00 |
| 28 | 7/0.127 | 0.25 | 0.9×2.54 | 2 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×3.81 | 3 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×5.08 | 4 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×6.35 | 5 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×7.62 | 6 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×8.89 | 7 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×10.16 | 8 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×11.43 | 9 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×12.70 | 10 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×13.97 | 11 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×15.24 | 12 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×16.51 | 13 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×17.78 | 14 | 1.27 | 239.00 | |
| 28 | 7/0.127 | 0.25 | 0.9×19.05 | 15 | 1.27 | 239.00 | |
主要技术资料
-导体使用单股或绞线裸铜或镀锡铜。
-XLPE绝缘。
-额定温度:-40℃~125℃
-额定电压:30V/AC 60V/DC
-引用标准:ISO/6722-1:2011 JAE/J1128:2000
Techniacl Data
-Conduct Solid or stranded bare copper or tinned copper. -XLPE insulation.
-Rated temperature: -40℃~125℃
-Rated voltage:30V/AC 60V/DC
-Reference standard:ISO/6722-1:2011 JAE/J1128:2000
| 导体 | 绝缘 | 成缆 | ||||
| 尺寸 | 标称导体截面积 | 股数/直径 | 最大直径 | 最小绝缘厚度 | 绝缘厚度 | 最大外径 |
| AWG | MM2 | NO./MM | MM | MM | MM | MM |
| 20 | 1×0.50 | 7/0.32 | 0.97 | 0.52 | 0.74 | 2.80 |
| 18 | 1×0.80 | 19/0.23 | 1.17 | 0.53 | 0.76 | 3.00 |
| 16 | 1×1.00 | 19/0.28 | 1.45 | 0.57 | 0.81 | 3.40 |
| 14 | 1×2.00 | 19/0.36 | 1.80 | 0.62 | 0.89 | 3.90 |
| 12 | 1×3.00 | 19/0.45 | 2.29 | 0.66 | 0.94 | 4.60 |
| 10 | 1×5.00 | 19/0.57 | 2.87 | 0.73 | 1.04 | 5.30 |
1-4 国标薄壁汽车电线 QVR
主要技术资料
-导体使用绞合裸铜或镀锡铜。
-PVC绝缘。
-PVC护套。
-额定温度:70℃,105℃
-适用于一般电子、电器电源连接线
Techniacl Data
-Standed or solid copper codnuctor.
-PVC insulation.
-PVC Jacket.
-Rated temperature: 70℃ or 105℃ -For general purpose use for power supply cord.
| 产品类别productstyle | 导体Conductor | 绝缘Insulation | 最大电阻(Q/km)MaximunResistanceat20℃ | ||
| 面积(mm²)CROSSSECTION | 线数/线径No./mm | 平均厚度(mm)Nom.Thick | 外径(mm)OverallDiameter | ||
| QVR(Standed)绞线 | 0.5 | 28/0.15 | 0.64 | 2.20 | 39.00 |
| 0.75 | 24/0.20 | 0.68 | 2.50 | 26.00 | |
| 1.0 | 32/0.20 | 0.65 | 2.60 | 19.50 | |
| 1.5 | 48/0.20 | 0.62 | 2.85 | 13.30 | |
| 2.5 | 80/0.20 | 0.72 | 3.50 | 7.95 | |
| 4.0 | 126/0.20 | 0.90 | 4.40 | 4.95 | |
| 6.0 | 189/0.20 | 0.91 | 5.00 | 3.30 | |
1-5 EV新能源汽车动力电线 Power Cables for EV New Energy Automobiles
型 号:QBJ-C/XLPE QPJ-DXLPO QZJ-C/XLPE QZJ-D/XLPO QZJ-E/SIR QBJP2-C/XLPE QBJP2-D/XLPO
QZJP2- C/XLPE QZJP2-D/XLPO 单芯非屏蔽和屏蔽电缆
Model : QBJ-C/XLPE QPJ-DXLPO QZJ-C/XLPE QZJ-D/XLPO QZJ-E/SIR QBJP2-C/XLPE QBJP2-D/XLPO QZJP2-
C/XLPE QZJP2-D/XLPO Single-Core Unshielded and Shielded Cables
常 用 型 号:QBJ-C QZJ-C QBJP2-C QZJP2-C
Common Models:QBJ-C QZJ-C QBJP2-C QZJP2-C
QBJ-C 薄壁 XLPE 绝缘 单芯非屏蔽 额定温度 -40℃~125℃ 耐压 600V/900V
<sup>绝缘耐压测试仪</sup>QBJ-C Thin-Walled XLPE Insulated Single-Core Unshielded Rated Temperature -40℃~125℃ Withstand Voltage 600V/900V
QZJ-C 厚壁 XLPE 绝缘 单芯非屏蔽 额定温度 -40℃~125℃ 耐压 1000V/1500V
QBJ-C Thick-Walled XLPE Insulated Single-Core Unshielded Rated Temperature -40℃~125℃ Withstand Voltage 1000V/1500V
QBJP2-C 薄壁 XLPE 绝缘 单芯屏蔽 额定温度 -40℃~125℃ 耐压 600V/900V
QBJP2-C Thin-Walled XLPE Insulated Single-Core Shielded Rated Temperature -40℃~125℃ Withstand Voltage 600V/900V
QZJP2-C 厚壁 XLPE 绝缘 单芯屏蔽 额定温度 -40℃~125℃ 耐压 1000V/1500V
QBJP2-C Thick-Walled XLPE Insulated Single-Core Shielded Rated Temperature -40℃~125℃ Withstand Voltage 1000V/1500V
引 用 标 准: QC/T 1037:2016 ISO/19642-1 2019-04
Referenced Standards: QC/T 1037:2016 ISO/19642-1 2019-04
600V/900V单芯非屏蔽高压电缆EV新能源汽车动力电线 QBJ-C 单芯非屏蔽 600V/900V
Power Cables for EV New Energy Automobiles
主要技术资料
-导体:多股裸铜或镀锡铜绞合
-薄壁 XLPE 绝缘 单芯非屏蔽
-额定温度:-40℃~125℃
-耐压:600V/900V
-引用标准:ISO/19642-1:2019 QC/T 1037:2016
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-Thin-walled XLPE insulated single-core unshielded
-Rated temperature: -40℃~125℃
-Withstand voltage: 600V/900V
-Reference standard: ISO/19642-1:2019
QC/T 1037:2016
| 规格 | 导体 | 绝缘 | |||||
| 导体截面积mm² | 单丝根数a | 单丝直径mm | 外径mm | 厚度mm | 外径mm | ||
| 标称 | 标称 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 |
| 1.5 | 30 | 0.26 | 1.80 | 0.30 | 0.24 | 2.20 | 2.40 |
| 2.5 | 50 | 2.20 | 0.35 | 0.28 | 2.70 | 3.00 | |
| 4 | 56 | 0.31 | 2.80 | 0.40 | 0.32 | 3.40 | 3.70 |
| 6 | 84 | 3.40 | 4.00 | 4.30 | |||
| 10 | 320 | 0.21 | 4.50 | 0.60 | 0.48 | 5.30 | 6.00 |
| 16 | 510 | 5.80 | 0.65 | 0.52 | 6.40 | 7.20 | |
| 25 | 790 | 7.20 | 7.90 | 8.70 | |||
| 35 | 1090 | 8.50 | 0.80 | 0.64 | 9.40 | 10.40 | |
| 50 | 1600 | 10.50 | 0.90 | 0.71 | 11.00 | 12.20 | |
| 70 | 2175 | 12.50 | 1.00 | 0.80 | 13.00 | 14.40 | |
EV新能源汽车动力电线 QZJ-C 单芯非屏蔽 1000V/1500V
Power Cables for EV New Energy Automobiles
主要技术资料
-导体:多股裸铜或镀锡铜绞合
-厚壁 XLPE 绝缘 单芯非屏蔽
-额定温度:-40℃~125℃
-耐压:1000V/1500V
-引用标准:ISO/19642-1:2019
QC/T 1037:2016
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire
-Thick-walled XLPE insulated single-core unshielded
-Rated temperature: -40℃~125℃
-Withstand voltage: 1000V/1500V
-Reference standard: ISO/19642-1:2019
QC/T 1037:2016
| 规格 | 导体 | 绝缘 | |||||
| 导体截面积mm² | 单丝根数a | 单丝直径mm | 外径mm | 厚度mm | 外径mm | ||
| 标称 | 标称 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 |
| 10 | 320 | 0.21 | 4.5 | 1.00 | 0.80 | 5.90 | 6.50 |
| 16 | 510 | 5.8 | 1.10 | 0.82 | 7.70 | 8.30 | |
| 25 | 790 | 7.2 | 1.30 | 1.04 | 9.40 | 10.40 | |
| 35 | 1090 | 8.5 | 9.60 | 11.60 | |||
| 50 | 1600 | 10.5 | 1.50 | 1.20 | 11.50 | 13.50 | |
| 70 | 2175 | 12.5 | 13.50 | 15.50 | |||
| 95 | 3000 | 14.8 | 16.00 | 18.00 | |||
| 120 | 3700 | 16.5 | 17.70 | 19.70 | |||
EV新能源汽车动力电线 QBJP2-C 单芯屏蔽 600V/900V
Power Cables for EV New Energy Automobiles
主要技术资料
-导体:多股裸铜或镀锡铜绞合
-薄壁 XLPE 绝缘 单芯屏蔽
-额定温度:-40℃~125℃
-耐压:600V/900V
-引用标准:ISO/19642-1:2019
QC/T 1037:2016
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-Thin-walled XLPE insulated single-core shielded
-Rated temperature: -40℃~125℃
-Withstand voltage: 600V/900V
-Reference standard: ISO/19642-1:2019
QC/T 1037:2016
| 规格 | 导体 | 绝缘 | 屏蔽 | 护套 | ||||||||
| 导体截面积mm² | 单丝根数a | 单丝直径mm | 外径mm | 厚度mm | 外径mm | 编制单丝半直径mm | 厚度mm | 外径mm | ||||
| 标称 | 标称 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 |
| 1.5 | 30 | 0.26 | 1.80 | 0.30 | 0.24 | 2.20 | 2.40 | 0.11 | 0.6 | 0.38 | 3.7 | 4.2 |
| 2.5 | 50 | 2.20 | 0.35 | 0.28 | 2.70 | 3.00 | 4.3 | 4.8 | ||||
| 4 | 56 | 0.31 | 2.80 | 0.40 | 0.32 | 3.40 | 3.70 | 5.1 | 5.7 | |||
| 6 | 84 | 3.40 | 4.00 | 4.30 | 0.16 | 0.8 | 0.54 | 6.1 | 6.7 | |||
| 10 | 320 | 0.21 | 4.50 | 0.60 | 0.48 | 5.30 | 6.00 | 1.0 | 0.70 | 7.8 | 8.8 | |
| 16 | 510 | 5.80 | 0.65 | 0.52 | 6.40 | 7.20 | 9.0 | 10.0 | ||||
| 25 | 790 | 7.20 | 7.90 | 8.70 | 0.21 | 1.25 | 0.80 | 11.4 | 12.4 | |||
| 35 | 1090 | 8.50 | 0.80 | 0.64 | 9.40 | 10.40 | 1.5 | 1.00 | 13.0 | 14.5 | ||
| 50 | 1600 | 10.50 | 0.90 | 0.71 | 11.00 | 12.20 | 14.8 | 16.3 | ||||
| 70 | 2175 | 12.50 | 1.00 | 0.80 | 13.00 | 14.40 | 1.7 | 1.16 | 16.8 | 18.5 | ||
EV新能源汽车动力电线 QZJP2-C 单芯屏蔽 1000V/1500V
Power Cables for EV New Energy Automobiles
主要技术资料
-导体:多股裸铜或镀锡铜绞合
-厚壁 厚壁 XLPE 绝缘 单芯屏蔽
-额定温度:-40℃~125℃
-耐压:1000V/1500V
-引用标准:ISO/19642-1:2019 QC/T 1037:2016
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire
-Thick-walled XLPE insulated single-core shielded
-Rated temperature: -40℃~125℃
-Withstand voltage: 1000V/1500V
-Reference standard: ISO/19642-1:2019
QC/T 1037:2016
| 规格 | 导体 | 绝缘 | 屏蔽 | 护套 | ||||||||
| 导体截面积mm² | 单丝根数a | 单丝牛直径mm | 外径mm | 厚度mm | 外径mm | 编制单丝直径mm | 厚度mm | 外径mm | ||||
| 标称 | 标称 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 | 最大 | 标称 | 最小 | 最小 | 最大 |
| 10 | 320 | 0.21 | 4.5 | 1.00 | 0.80 | 5.90 | 6.50 | 0.16 | 1.30 | 0.80 | 9.1 | 9.9 |
| 16 | 510 | 6.3 | 1.10 | 0.82 | 7.70 | 8.30 | 10.9 | 11.7 | ||||
| 25 | 790 | 7.8 | 1.30 | 1.04 | 9.40 | 10.40 | 1.50 | 1.00 | 13.2 | 14.5 | ||
| 35 | 1090 | 9.0 | 9.60 | 11.60 | 13.4 | 15.7 | ||||||
| 50 | 1600 | 10.5 | 1.50 | 1.20 | 11.50 | 13.50 | 0.21 | 1.70 | 1.16 | 15.7 | 18.0 | |
| 70 | 2175 | 12.5 | 13.50 | 15.50 | 17.7 | 20.0 | ||||||
| 95 | 3000 | 14.8 | 16.00 | 18.00 | 20.2 | 22.5 | ||||||
| 120 | 3700 | 16.5 | 17.70 | 19.70 | 21.9 | 24.2 | ||||||
1-6 电动机车充电电缆 Charging Cables for Electric Motorcycles
型 号:EV-RSS,EV-RS90S90,EV-RS90U,EVDC-RSS,EVDC-RS90S90,EVDC-RS90U交流和直流充电电缆 Model: EV-RSS,EV-RS90S90,EV-RS90U,EVDC-RSS,EVDC-RS90S90,EVDC-RS90UAC and DC charging cables
常 用 型 号: EV-RS90S90 EV-RS90U EVDC-RS90S90 EVDC-RS90U
Common models: EV-RS90S90, EV-RS90U, EVDC-RS90S90, EVDC-RS90U
EV-RS90S90: 交流枪电缆 TPE 绝缘 TPE护套 额定温度 -40℃→90℃ 耐压 450V/750V
EV-RS90S90: AC charging gun cable with TPE insulation and TPE sheath, rated temperature -40℃ to 90℃, voltage resistance 450V/750V
EV-RS90U: 交流枪电缆 TPU 绝缘 TPU 护套 额定温度 -40℃→90℃ 耐压 450V/750V
EV-RS90U: AC charging gun cable with TPU insulation and TPU sheath, rated temperature -40℃ to 90℃, voltage resistance 450V/750V
EVDC-RS90S90:直流枪电缆 TPE 绝缘 TPE护套 额定温度 -40℃→90℃ 耐压 DC 1000V
EVDC-RS90S90:DC charging gun cable with TPE insulation and TPE sheath, rated temperature -40℃ to 90℃, voltage resistance DC 1000V
EVDC-RS90U:直流枪电缆 TPU 绝缘 TPU 护套 额定温度 -40℃→90℃ 耐压 DC 1000V
EVDC-RS90U: DC charging gun cable with TPU insulation and TPU sheath, rated temperature -40℃ to 90℃, voltage resistance DC 1000V
引 用 标 准:GB/T 33594-2017
Reference standard: GB/T 33594-2017
电动机车充电电缆 EV-R S90S90 Charging Cables for Electric Motorcycles
-导体:多股裸铜或镀锡铜绞合。
-TPE绝缘。
-TPE护套。
-额定温度:-40℃~90℃
-耐压:450V/750V
-引用标准:ISO/19642-1:2019 GB/T 33594-2017
Techniacl Data
-Conduct:Multi-strand bare copper or tinned copper stranded wire -TPE insulation.
-TPE sheath.
-Rated temperature: -40℃~ 90℃
-Pressure resistance: 450V/750V
-Reference standard: ISO/19642-1:2019 GB/T 33594-2017
| 主绝缘芯数x标称截面积mm2 | 护套标称厚度mm | 电缆平均外径参考值mm | ||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | |||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | U护套 | 其他材料 | U护套 | 其他材料 | |||||||
| U护套 | 其他材料 | U护套 | 其他材料 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | |
| 3×1.0 | 1.0 | 1.7 | 1.1 | 1.8 | 9.6 | 12.4 | 10.9 | 14.0 | 10.9 | 14.0 | 12.0 | 15.7 |
| 3×1.5 | 1.1 | 1.8 | 1.1 | 1.9 | 10.3 | 13.2 | 11.6 | 14.9 | 11.4 | 14.6 | 12.9 | 16.6 |
| 3×2.5 | 1.1 | 1.9 | 1.2 | 2.0 | 11.0 | 14.2 | 12.6 | 16.1 | 12.4 | 15.8 | 13.9 | 17.8 |
| 3X4 | 1.2 | 2.0 | 1.3 | 2.2 | 12.9 | 16.4 | 14.4 | 18.4 | 14.4 | 18.4 | 16.1 | 20.5 |
| 3X6 | 1.3 | 2.2 | 1.4 | 2.3 | 14.1 | 18.0 | 15.8 | 20.2 | 15.6 | 19.9 | 17.4 | 22.1 |
| 3X10 | 1.4 | 2.3 | 1.5 | 2.5 | 15.8 | 20.2 | 17.6 | 22.3 | 17.4 | 22.1 | 19.3 | 24.5 |
| 3X16 | 1.6 | 2.6 | 1.6 | 2.7 | 18.1 | 23.0 | 20.1 | 25.4 | 19.5 | 24.7 | 21.6 | 27.4 |
| 3×25 | 1.7 | 2.9 | 1.9 | 3.1 | 21.7 | 27.5 | 24.0 | 30.4 | 23.4 | 29.6 | 25.7 | 32.5 |
| 3×35 | 2.0 | 3.3 | 2.1 | 3.5 | 25.2 | 31.9 | 27.7 | 35.0 | 27.1 | 34.2 | 29.7 | 37.6 |
| 3×50 | 2.2 | 3.7 | 2.3 | 3.9 | 29.6 | 37.3 | 32.4 | 40.9 | 31.4 | 39.6 | 34.5 | 43.4 |
| 3X70 | 2.5 | 4.2 | 2.6 | 4.4 | 33.9 | 42.7 | 37.1 | 46.8 | 35.7 | 45.0 | 39.2 | 49.3 |
| 4×1.0 | 1.1 | 1.8 | 1.1 | 1.9 | 10.5 | 13.6 | 11.9 | 15.2 | 11.7 | 15.0 | 13.2 | 16.9 |
| 4×1.5 | 1.1 | 1.9 | 1.2 | 2.0 | 11.0 | 14.2 | 12.6 | 16.1 | 12.4 | 15.8 | 13.9 | 17.8 |
| 4×2.5 | 1.2 | 2.0 | 1.3 | 2.1 | 12.2 | 15.6 | 13.7 | 17.5 | 13.7 | 17.5 | 15.3 | 19.4 |
| 4X4 | 1.3 | 2.2 | 1.4 | 2.3 | 14.3 | 18.2 | 16.0 | 20.4 | 15.8 | 20.2 | 17.6 | 22.3 |
| 4×6 | 1.4 | 2.3 | 1.5 | 2.5 | 15.7 | 20.0 | 17.5 | 22.2 | 17.3 | 22.0 | 19.2 | 24.4 |
| 4×10 | 1.5 | 2.5 | 1.6 | 2.7 | 17.7 | 22.6 | 19.7 | 25.0 | 19.3 | 24.5 | 21.4 | 27.1 |
| 4×16 | 1.7 | 2.8 | 1.8 | 3.0 | 20.4 | 25.9 | 22.5 | 28.6 | 22.0 | 27.8 | 24.3 | 30.7 |
| 4×25 | 1.9 | 3.2 | 2.0 | 3.4 | 24.7 | 31.2 | 27.2 | 34.3 | 26.5 | 33.5 | 29.2 | 36.8 |
| 4×35 | 2.2 | 3.6 | 2.3 | 3.8 | 28.1 | 35.5 | 30.8 | 38.9 | 29.9 | 37.8 | 32.8 | 41.4 |
| 4×50 | 2.5 | 4.1 | 2.6 | 4.3 | 33.1 | 41.8 | 36.2 | 45.6 | 34.9 | 44.0 | 38.2 | 48.1 |
| 4×70 | 2.8 | 4.6 | 2.8 | 4.7 | 37.9 | 47.8 | 41.4 | 52.1 | 39.5 | 49.8 | 43.2 | 54.4 |
电动机车充电电缆 EV-R S90U Charging Cables for Electric Motorcycles
-导体:多股裸铜或镀锡铜绞合。
-TPU绝缘。
-TPU护套。
-额定温度:-40℃~90℃
-耐压:450V/750V
-引用标准:ISO/19642-1:2019 GB/T 33594-2017
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire -TPU insulation.
-TPU sheath.
-Rated temperature: -40℃~ 90℃
-Pressure resistance: 450V/750V
-Reference standard: ISO/19642-1:2019 GB/T 33594-2017
| 主绝缘芯数x标称截面积mm2 | 护套标称厚度mm | 电缆平均外径参考值mm | ||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | |||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | U护套 | 其他材料 | U护套 | 其他材料 | |||||||
| U护套 | 其他材料 | U护套 | 其他材料 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | |
| 3×1.0 | 1.0 | 1.7 | 1.1 | 1.8 | 9.6 | 12.4 | 10.9 | 14.0 | 10.9 | 14.0 | 12.0 | 15.7 |
| 3X1.5 | 1.1 | 1.8 | 1.1 | 1.9 | 10.3 | 13.2 | 11.6 | 14.9 | 11.4 | 14.6 | 12.9 | 16.6 |
| 3X2.5 | 1.1 | 1.9 | 1.2 | 2.0 | 11.0 | 14.2 | 12.6 | 16.1 | 12.4 | 15.8 | 13.9 | 17.8 |
| 3×4 | 1.2 | 2.0 | 1.3 | 2.2 | 12.9 | 16.4 | 14.4 | 18.4 | 14.4 | 18.4 | 16.1 | 20.5 |
| 3×6 | 1.3 | 2.2 | 1.4 | 2.3 | 14.1 | 18.0 | 15.8 | 20.2 | 15.6 | 19.9 | 17.4 | 22.1 |
| 3X10 | 1.4 | 2.3 | 1.5 | 2.5 | 15.8 | 20.2 | 17.6 | 22.3 | 17.4 | 22.1 | 19.3 | 24.5 |
| 3X16 | 1.6 | 2.6 | 1.6 | 2.7 | 18.1 | 23.0 | 20.1 | 25.4 | 19.5 | 24.7 | 21.6 | 27.4 |
| 3×25 | 1.7 | 2.9 | 1.9 | 3.1 | 21.7 | 27.5 | 24.0 | 30.4 | 23.4 | 29.6 | 25.7 | 32.5 |
| 3×35 | 2.0 | 3.3 | 2.1 | 3.5 | 25.2 | 31.9 | 27.7 | 35.0 | 27.1 | 34.2 | 29.7 | 37.6 |
| 3×50 | 2.2 | 3.7 | 2.3 | 3.9 | 29.6 | 37.3 | 32.4 | 40.9 | 31.4 | 39.6 | 34.5 | 43.4 |
| 3X70 | 2.5 | 4.2 | 2.6 | 4.4 | 33.9 | 42.7 | 37.1 | 46.8 | 35.7 | 45.0 | 39.2 | 49.3 |
| 4×1.0 | 1.1 | 1.8 | 1.1 | 1.9 | 10.5 | 13.6 | 11.9 | 15.2 | 11.7 | 15.0 | 13.2 | 16.9 |
| 4×1.5 | 1.1 | 1.9 | 1.2 | 2.0 | 11.0 | 14.2 | 12.6 | 16.1 | 12.4 | 15.8 | 13.9 | 17.8 |
| 4×2.5 | 1.2 | 2.0 | 1.3 | 2.1 | 12.2 | 15.6 | 13.7 | 17.5 | 13.7 | 17.5 | 15.3 | 19.4 |
| 4×4 | 1.3 | 2.2 | 1.4 | 2.3 | 14.3 | 18.2 | 16.0 | 20.4 | 15.8 | 20.2 | 17.6 | 22.3 |
| 4×6 | 1.4 | 2.3 | 1.5 | 2.5 | 15.7 | 20.0 | 17.5 | 22.2 | 17.3 | 22.0 | 19.2 | 24.4 |
| 4×10 | 1.5 | 2.5 | 1.6 | 2.7 | 17.7 | 22.6 | 19.7 | 25.0 | 19.3 | 24.5 | 21.4 | 27.1 |
| 4×16 | 1.7 | 2.8 | 1.8 | 3.0 | 20.4 | 25.9 | 22.5 | 28.6 | 22.0 | 27.8 | 24.3 | 30.7 |
| 4×25 | 1.9 | 3.2 | 2.0 | 3.4 | 24.7 | 31.2 | 27.2 | 34.3 | 26.5 | 33.5 | 29.2 | 36.8 |
| 4×35 | 2.2 | 3.6 | 2.3 | 3.8 | 28.1 | 35.5 | 30.8 | 38.9 | 29.9 | 37.8 | 32.8 | 41.4 |
| 4×50 | 2.5 | 4.1 | 2.6 | 4.3 | 33.1 | 41.8 | 36.2 | 45.6 | 34.9 | 44.0 | 38.2 | 48.1 |
| 4×70 | 2.8 | 4.6 | 2.8 | 4.7 | 37.9 | 47.8 | 41.4 | 52.1 | 39.5 | 49.8 | 43.2 | 54.4 |
电动机车充电电缆 EVDC-R S90S90
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-TPE绝缘。
-TPE护套。
-额定温度:-40℃~90℃
-耐压:DC 1000V
-引用标准:ISO/19642-1:2019 GB/T 33594-2017
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire -TPE insulation.
-TPE sheath.
-Rated temperature: -40℃~90℃
-Pressure resistance: DC 1000V
-Reference standard:ISO/19642-1:2019 GB/T 33594-2017
| 主绝缘芯数X标称截面积mm2 | 护套标称厚度mm | 电缆平均外径参考值mm | ||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | |||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | U护套 | 其他材料 | U护套 | 其他材料 | |||||||
| U护套 | 其他材料 | U护套 | 其他材料 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | |
| 2×10 | 1.4 | 2.3 | 1.4 | 2.4 | 15.3 | 19.6 | 17.1 | 21.7 | 16.7 | 21.2 | 18.6 | 23.6 |
| 2×16 | 1.5 | 2.5 | 1.6 | 2.7 | 17.8 | 22.7 | 19.8 | 25.1 | 19.4 | 24.6 | 21.5 | 27.2 |
| 2×25 | 1.8 | 3.0 | 1.9 | 3.2 | 22.2 | 28.1 | 24.5 | 31.0 | 24.0 | 30.4 | 26.5 | 33.5 |
| 2×35 | 2.0 | 3.2 | 2.1 | 3.5 | 25.2 | 31.9 | 27.7 | 35.0 | 27.1 | 34.2 | 29.7 | 37.6 |
| 2×50 | 2.2 | 3.7 | 2.3 | 3.9 | 29.6 | 37.3 | 32.4 | 40.9 | 31.4 | 39.6 | 34.5 | 43.4 |
| 2×70 | 2.5 | 4.2 | 2.6 | 4.4 | 33.9 | 42.7 | 37.1 | 46.8 | 35.9 | 45.2 | 39.3 | 49.6 |
| 2×95 | 2.8 | 4.6 | 2.9 | 4.8 | 38.4 | 48.4 | 41.8 | 52.7 | 40.4 | 50.9 | 44.1 | 55.4 |
| 2×120 | 3.0 | 5.0 | 3.1 | 5.2 | 42.3 | 53.3 | 46.2 | 58.1 | 44.3 | 55.8 | 48.4 | 60.8 |
| 2×150 | 3.3 | 5.5 | 3.4 | 5.7 | 47.4 | 59.6 | 51.6 | 64.9 | 49.0 | 61.7 | 53.5 | 67.2 |
| 2×185 | 3.6 | 6.0 | 3.7 | 6.2 | 52.3 | 65.8 | 56.9 | 71.5 | 53.9 | 67.8 | 58.7 | 73.8 |
| 2×240 | 4.1 | 6.8 | 4.1 | 6.9 | 59.5 | 74.8 | 64.7 | 81.2 | 60.9 | 76.6 | 66.3 | 83.3 |
电动机车充电电缆 EVDC-R S90U
主要技术资料
-导体:多股裸铜或镀锡铜绞合。
-TPU绝缘。
-TPU护套。
-额定温度:-40℃~90℃
-耐压:DC 1000V
-引用标准:ISO/19642-1:2019 GB/T 33594-2017
Techniacl Data
-Conduct: Multi-strand bare copper or tinned copper stranded wire -TPU insulation.
-TPU sheath.
-Rated temperature: -40℃~90℃
-Pressure resistance: DC 1000V
-Reference standard:ISO/19642-1:2019 GB/T 33594-2017
| 主绝缘芯数X标称截面积mm2 | 护套标称厚度mm | 电缆平均外径参考值mm | ||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | |||||||||||
| 无总屏蔽电缆 | 总屏蔽电缆 | U护套 | 其他材料 | U护套 | 其他材料 | |||||||
| U护套 | 其他材料 | U护套 | 其他材料 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | 下限 | 上限 | |
| 2×10 | 1.4 | 2.3 | 1.4 | 2.4 | 15.3 | 19.6 | 17.1 | 21.7 | 16.7 | 21.2 | 18.6 | 23.6 |
| 2×16 | 1.5 | 2.5 | 1.6 | 2.7 | 17.8 | 22.7 | 19.8 | 25.1 | 19.4 | 24.6 | 21.5 | 27.2 |
| 2×25 | 1.8 | 3.0 | 1.9 | 3.2 | 22.2 | 28.1 | 24.5 | 31.0 | 24.0 | 30.4 | 26.5 | 33.5 |
| 2×35 | 2.0 | 3.2 | 2.1 | 3.5 | 25.2 | 31.9 | 27.7 | 35.0 | 27.1 | 34.2 | 29.7 | 37.6 |
| 2×50 | 2.2 | 3.7 | 2.3 | 3.9 | 29.6 | 37.3 | 32.4 | 40.9 | 31.4 | 39.6 | 34.5 | 43.4 |
| 2×70 | 2.5 | 4.2 | 2.6 | 4.4 | 33.9 | 42.7 | 37.1 | 46.8 | 35.9 | 45.2 | 39.3 | 49.6 |
| 2×95 | 2.8 | 4.6 | 2.9 | 4.8 | 38.4 | 48.4 | 41.8 | 52.7 | 40.4 | 50.9 | 44.1 | 55.4 |
| 2×120 | 3.0 | 5.0 | 3.1 | 5.2 | 42.3 | 53.3 | 46.2 | 58.1 | 44.3 | 55.8 | 48.4 | 60.8 |
| 2×150 | 3.3 | 5.5 | 3.4 | 5.7 | 47.4 | 59.6 | 51.6 | 64.9 | 49.0 | 61.7 | 53.5 | 67.2 |
| 2×185 | 3.6 | 6.0 | 3.7 | 6.2 | 52.3 | 65.8 | 56.9 | 71.5 | 53.9 | 67.8 | 58.7 | 73.8 |
| 2×240 | 4.1 | 6.8 | 4.1 | 6.9 | 59.5 | 74.8 | 64.7 | 81.2 | 60.9 | 76.6 | 66.3 | 83.3 |
1-7 光伏电线 Photovoltaic Cables
主要技术资料
-导体:符合DIN VDE 0295 and IEC 60228 Class 5的绞合镀锡铜导线。
-绝缘:电子束交联,低烟无卤阻燃复合物。
-护套:电子束交联,低烟无卤阻燃复合物, 黑色。
-室内温度:-40℃~90℃
-能耐电压: 6500 Vac for 5 min
-引用标准:2 PfG 1169/08.2007 (PV1-F)
Techniacl Data
-Conductor: Stranded tinned copper conductor compliant with DIN VDE 0295 and IEC 60228 Class 5.
-Insulation: Electron beam cross-linked, low smoke zero halogen (LSZH) flame retardant compound.
-Sheath: Electron beam cross-linked, low smoke zero halogen (LSZH) flame retardant compound, black.
-Ambient temperature: -40℃ to +90℃.
-Withstand voltage: 6500 Vac for 5 minutes.
-Reference standard: 2 PfG 1169/08.2007 (PV1-F).
| 芯数&标称截面积 | 股数/线缆直径 | 标称导体直径 | 标称绝缘厚度 | 标称护套厚度 | 标称外径 | 标称重量 |
| NO×MM² | MM | MM | MM | MM | KG/KM | |
| 1×1.5 | 30/0.25 | 1.58 | 1.14 | 0.82 | 5.4 | 52 |
| 1×2.5 | 50/0.25 | 2.04 | 1.14 | 0.82 | 5.8 | 67 |
| 1×4.0 | 56/0.30 | 2.59 | 1.14 | 0.82 | 6.4 | 87 |
| 1×6.0 | 84/0.30 | 3.17 | 1.14 | 0.82 | 7.0 | 113 |
| 1×10.0 | 78/0.30 | 4.07 | 1.52 | 0.82 | 8.6 | 178 |
| 1×16.0 | 128/0.30 | 5.22 | 1.52 | 0.82 | 9.8 | 254 |
| 1×25.0 | 199/0.30 | 6.51 | 1.52 | 0.82 | 11.1 | 363 |
| 1×35.0 | 279/0.30 | 7.71 | 1.52 | 0.82 | 12.3 | 473 |
常 用 型 号:UTP CAT5e FTP CAT5e UTP CAT6
Common Models: UTP CAT5e FTP CAT5e UTP CAT6
UTP CAT5e: 非屏蔽超五类网线 实芯聚乙烯绝缘 聚氯乙烯护套 工作温度 70℃
UTP CAT5e: Unshielded Cat5e twisted pair cable with solid polyethylene insulation and PVC sheath, operating temperature 70℃
FTP CAT5e: 屏蔽超五类网线 实芯聚乙烯绝缘 铝箔/铜丝编织屏蔽 聚氯乙烯护套工作温度 70℃
FTP CAT5e: Shielded Cat5e twisted pair cable with solid polyethylene insulation, aluminum foil/copper wire braided shield and PVC sheath, operating temperature 70℃
UTP CAT6: 非屏蔽六类网线 实芯聚乙烯绝缘 聚氯乙烯护套 工作温度 70℃
UTP CAT6: Unshielded Cat6 twisted pair cable with solid polyethylene insulation and PVC sheath,operating temperature 70℃
引 用 标 准: EIA/TIA 568B & ISO/IEC 11801
主要技术资料
-导体:单肢或多股裸铜或镀锡铜绞合
-聚乙烯绝缘
-聚氯乙烯护套
-工作温度:70℃
-参考标准:EIA/TIA 568B & ISO/IEC 11801
Techniacl Data
-Conductor: Single or multi-strand bare copper or tinned copper stranded wire.
-Insulation: Solid polyethylene.
-Sheath: Polyvinyl chloride (PVC).
-Operating temperature: 70℃.
-Reference standard: EIA/TIA 568B & ISO/IEC 11801.
| 导体材料 | 实芯裸铜 | 外护套可选材料 | 聚氯乙烯/低烟低卤/低烟无卤 |
| AWG | 24 | 护套颜色 | 按用户要求 |
| 导体直径(mm) | 0.5 | 弯曲半径 | 6倍电缆最大外径 |
| 绝缘材料 | 实芯聚乙烯 | 导体最大直流电阻20℃(Ω/KM) | <93.8 |
| 绝缘厚度(mm) | 0.217 | 工作温度(℃) | 70 |
| 绝缘直径(mm) | 0.95 | 传播率 | 68% |
| 护套材料 | 聚氯乙烯 | 特性阻抗(ohm) | 100±15 |
| 护套厚度(mm) | 1.1 | 防火标准 | 火焰传播测试通过 IEC 60332标准第一部分(LSOH)火焰传播测试通过 IEC 60332 标准第一三部分(LSFROH)卤素酸气指数达到 IEC60754 第一部分的标准烟密度测试达到 IEC61034 标准 |
| 最大外径(mm) | 5.20 |
主要技术资料
-导体:单肢或多股裸铜或镀锡铜绞合
-聚乙烯绝缘
-聚氯乙烯护套
-屏蔽材料:铝箔/铜丝编织
-排流线:镀锡铜
-工作温度:70℃
-参考标准:EIA/TIA 568B & ISO/IEC 11801
Techniacl Data
-Conductor: Single or multi-strand bare copper or tinned copper stranded wire.
-Insulation: Solid polyethylene.
-Sheath: Polyvinyl chloride (PVC).
-Shielding material: Aluminum foil / copper braid.
-Drain wire: tin-plated copper.
-Operating temperature: 70℃.
-Reference standard: EIA/TIA 568B & ISO/IEC 11801.
Unshielded Category 5e Twisted Pair Cable
| 导体材料 | 实芯裸铜 | 最大外径(mm) | 5.8 |
| AWG | 24 | 外护套可选材料 | 聚氯乙烯/低烟低卤/低烟无卤 |
| 导体直径(mm) | 0.53 | 护套颜色 | 按用户要求 |
| 绝缘材料 | 实芯聚乙烯 | 弯曲半径 | 6倍电缆最大外径 |
| 绝缘厚度(mm) | 0.2 | 导体最大直流电阻20℃(Ω/Km) | <93.8 |
| 绝缘直径(mm) | 1.00 | 工作温度(℃) | 70 |
| 排流线 | 镀锡铜 | 传播率 | 68% |
| 结构(mm) | 7/0.2 | 特性阻抗(ohm) | 100±15 |
| 屏蔽材料 | 铝箔/铜丝编织 | 防火标准 | 火焰传播测试通过 IEC 60332标准第一部分(LSOH)火焰传播测试通过 IEC 60332 标准第一三部分(LSFROH)卤素酸气指数达到 IEC60754 第一部分的标准烟密度测试达到 IEC61034 标准 |
| 护套材料 | 聚氯乙烯 | ||
| 护套厚度(mm) | 1.4 |
主要技术资料
-导体:单肢或多股裸铜或镀锡铜绞合
-聚乙烯绝缘
-聚氯乙烯护套
-工作温度:70℃
-参考标准:EIA/TIA 568B & ISO/IEC 11801
Techniacl Data
-Conductor: Single or multi-strand bare copper or tinned copper stranded wire.
-Insulation: Solid polyethylene.
-Sheath: Polyvinyl chloride (PVC).
-Operating temperature: 70℃.
-Reference standard: EIA/TIA 568B & ISO/IEC 11801.
| 导体材料 | 实芯裸铜 | 外护套可选材料 | 聚氯乙烯/低烟低卤/低烟无卤 |
| AWG | 23 | 护套颜色 | 按用户要求 |
| 导体直径(mm) | 0.574 | 弯曲半径 | 6倍电缆最大外径 |
| 绝缘材料 | 实芯聚乙烯 | 导体最大直流电阻20℃(Ω/KM) | <93.8 |
| 绝缘厚度(mm) | 0.2 | 工作温度(℃) | 70 |
| 绝缘直径(mm) | 0.95 | 传播率 | 74% |
| 护套材料 | 聚氯乙烯 | 特性阻抗(ohm) | 100±15 |
| 护套厚度(mm) | 1.1 | 防火标准 | 火焰传播测试通过 IEC 60332标准第一部分(LSOH)火焰传播测试通过 IEC 60332 标准第一三部分(LSFROH)卤素酸气指数达到 IEC60754 第一部分的标准烟密度测试达到 IEC61034 标准 |
| 最大外径(mm) | 6.1 |
型 号:CF211 CF140.UL CFBUS.PVC CFROBOT3 CF30 CF10 CF10.UL CF11 CF111.D CF112
Model:CF211 CF140.UL CFBUS.PVC CFROBOT3 CF30 CF10 CF10.UL CF11 CF111.D CF112
■机器人拖链电缆 高柔性控制电缆 CF140.UL
Robot Drag Chain Cables
主要技术资料
-用于中等应用要求
-外护套:PVC
-总屏蔽
-阻燃、无硅、不耐油
-CFRIP®
-chainflex®等级:4.4.1.1
Techniacl Data
-For medium application requirements
-Outer jacket: PVC
-Overall shielding
-Flame retardant、Silicone-free、Not oil
resistant
-CFRIP®
-chainflex® grade: 4.4.1.1
| 一般性能 | 芯数及截面积 | 最大外径 | 每千米重量[kg/km] | 铜含量[kg/km] | ||
| (12×0.25)C | 10.5 | 133 | 72 | |||
| 动态信息 | 拖链内移动最小弯曲半径(系数)[xd] | 拖链内移动最小弯曲半径[mm] | 非拖链内移动最小弯曲半径(系数)[x d] | 固定铺设最小弯曲半径(系数)[x d] | 拖链内移动使用温度范围 | 非拖链内移动使用温度范围 |
| 7.5 | 78.75 | 6 | 4 | +5°C至+70°C | -5°C至+70C (按照标准 EN60811-504) | |
| 固定铺设使用温度范围 | 架空最大速度[m/s] | 滑行最大速度[m/s] | 最大加速度[m/s²] | |||
| -15℃至+70℃(按照标准 DIN EN 50305) | 3 | 2 | 20 | |||
| 电气参数 | 导体 | 芯线绝缘 | 芯线结构 | 芯线组1 | 内护套 | 总屏蔽 |
| 精密绞合的高抗弯强度的精细裸铜多股线(符合 DIN EN 60228 标准) | 高机械性能的TPE混合物 | 芯线采用两次复绞,特别的抗扭力结构 | (12x0.25)C | PVC 混合物,适用于拖链 | 高抗弯强度的镀锡铜丝编织屏蔽层。线性覆盖率55%,光学覆盖率80% | |
| 外护套 | CFRIP® | |||||
| 低粘性的PVC混合物,适用于拖链(符合DIN EN50363-4-1)的要求 | 电缆剥开速度更快:剥线条在内护套下 | |||||
| 特性和认证 | 抗UV | 耐油性 | 阻燃 | 无硅 | PFAS-free | NFPA |
| 无 | 不耐油 | 根据IEC 60332-1-2 FT1, VW-1 | 不含腐蚀性的硅(符合PV 3.10.71992标准) | 根据REACH法规及其关于化学物质制造和加工的规则的内容使用不含PFAS的材料 | 符合 NFPA 79-2018 标准第12.9 章节 | |
| REACH | 无铅 | 无尘室 | CE | |||
| 符合(EC) No.1907/2006(REACH)标准 | 符合2011/65/EU(RoHS II)标准 | 符合 ISO Class 1标准。本系列外护套材料与CF130.15.07.UL一致,电缆材料经IPA 检测,符合DIN EN ISO14644-1 标准 | 符合2014/35/EU标准 |
■机器人拖链电缆 高柔性数据电缆 CF211.PUR
Robot Drag Chain Cables
主要技术资料
-用于高应用要求
-外护套:PUR
-总屏蔽
-耐油(符合DIN EN 50363-10-2标准)
-耐划痕、耐水解和微生物、阻燃、无卤素无硅、不含PVC、抗UV
-chainflex®等级:5.5.3.1
Techniacl Data
-For high application requirements
-Outer jacket: PUR
-Overall shielding
-Oil-resistant (compliant with DIN EN 50363-10-2 standard)
-Scratch-resistant, hydrolysis and microbial resistant,
flame retardant, halogen-free
Silicone-free, PVC-free, UV-resistant
-chainflex® grade: 5.5.3.1
| 一般性能 | 芯数及截面积 | 最大外径 | 每千米重量[kg/km] | 铜含量[kg/km] | ||
| (2x0.25)C | 5 | 32 | 18 | |||
| 动态信息 | 拖链内移动最小弯曲半径(系数)[xd] | 拖链内移动最小弯曲半径 [mm] | 非拖链内移动最小弯曲半径(系数)[x d] | 固定铺设最小弯曲半径(系数)[x d] | 拖链内移动使用温度范围 | 非拖链内移动使用温度范围 |
| 7.5 | 37.5 | 6 | 4 | -25°C至+80°C | -40℃至+80℃(按照标准EN 60811-504) | |
| 固定铺设使用温度范围 | 架空最大速度[m/s] | 滑行最大速度[m/s] | 最大加速度[m/s²] | |||
| -50℃至+80℃(按照标准 DIN EN 50305) | 5 | 3 | 50 | |||
| 电气参数 | 额定电压 | UL额定电压 [V] | 测试电压 | 20°C时最大导体电阻[Ω/km] | ||
| 300/300 V(根据DINVDE 0298-3) | 300 | 1500V(根据DINEN 50395) | 79 | |||
| 电缆结构 | 导体 | 芯线绝缘 | 芯线结构 | 芯线组1 | 总屏蔽 | 外护套 |
| 特殊耐弯折的精细裸铜多股线 | 高机械性能的TPE混合物 | 每两根芯线以短节距对绞,再将所有对线以短节距围绕高强度中芯线绞合在一起 | (2 x 0.25)c | 高抗弯强度的镀锡铜丝编织屏蔽层。线性覆盖率70%,光学覆盖率90% | 低粘性、无卤、高耐磨PUR混合物,适用于拖链(符合DIN EN 50363-10-2)的要求 | |
| 特性和认证 | 抗UV | 耐油性 | 阻燃 | 无硅 | 无卤素 | NFPA |
| 中 | 耐油(符合DIN EN50363-10-2标准),Class 3 | 根据IEC 60332-1-2 FT1, VW-1 | 不含腐蚀性的硅(符合PV3.10.7-1992标准) | 符合DIN EN 60754标准 | 符合 NFPA 79-2018 标准第12.9 章节 | |
| REACH | 无铅 | 无尘室 | CE | 海上平台 | ||
| 符合(EC) No.1907/2006 (REACH) 标准 | 符合2011/65/EU(RoHS II) 标准 | 符合ISO Class 1标准。本系列外护套材料CF77.UL.05.12.D一致,电缆材料经IPA测试,符合DINENIS014644-1标准 | 符合2014/35/EU标准 | 抗MUD 符合 NEK606 - 2009 标准 |
2-1 EV汽车动力高压线束
High - Voltage Wiring Harnesses for EV Power Systems
EV整车高压互连技术解决方案
l 连接器厂商:安费诺 泰科 中航光电
l 引用标准:QC/T 29106-2014
l 电线型号:QBJ-C QZJ-C QBJP2-C QZJP2-C
l Connector Manufacturers:Amphenol TE Jonhon
l Referenced Standards:QC/T 29106-2014
l Wire Model:QBJ-C QZJ-C QBJP2-C QZJP2-C




