功能说明

1.单作用弹簧回缩。
2.螺母锁定使负载更安全。
3.特殊复合材料涂层使耐腐蚀能力更强，使操作摩擦力更小。

FUNCTION

1.Single-actingring.
2.Safely locknut forsafeoperation.
3.Special synthetic coating for increased corrosion resistance and decreased friction. CLL液压缸，在立交桥定位后， 机械锁定。
CLLcylinder,mechanically locked,after positioning the curved bridge.

在这一立交桥中，CLL油缸用来支撑混凝土梁，调平支座并将4000吨 的滑动轴承置于桥墩与支座中间。 Inthecloverleaf junctionconstruction,CLLcylindersare beingused tosupport the concrete beam,level the bridge bearingsandplace the 4000 tons sliding bearing between the piers and bridge bearings.

T！ V#

功能说明

1.双动式液压回油。
2.烤漆成型，增大了抗腐蚀的能力。
3.内置的安全阀，防止意外过压发生。
4.需配双回路泵浦使用。

FUNCTION

1.Double-acting,hydraulic return.
2.Baked enamel finish forincreasedcorrosionresistance.
3.Built-insafelyvalve preventsaccidental over-pressurixation.
4.Be equipper with double-loop pump to use.

在立交桥中用RR油缸替代调节滚轮，提供受控的顶升与下降
Replacingadjustment rollsundera fly-overwith RR cylinders,for controlled lifting anlowering.

在重型负载定位精确控制中，RR油缸是最佳的解决方案。RRcylinderis the best solutionto precise controlled heavy loads.

技术参数

爪式千斤顶BY-10爪部出力：2.5ton扬程：117mm本身高：228mm伸长总高： 3 4 5mm 主轴直径：29mm底座尺寸：130\*125mm爪高：16mm总重：8.5kg适用于重机械校正水平用，及一般干斤顶无法使用的狭小场所。

Technical parameters

Jack BY-10 claw contribute to the Department:2.5ton
Head:117mm Itself is high:228mm
Elongationoverall height:345mm Spindle Diameter:29mm
Base size:130\*125mm ClawHigh:16mm
Total weight:8.5kg correction applied to the level of heavy machinery use,and general jackcannotbeused insmallplaces.

47 JIMU TOOLS

功能说明

1.紧凑、轻便、快速，可在3mm以下碳钢板上开制圆孔、方孔等，可配合其它特殊开孔模使用，无间断定向驱动，使接近工作点更容易。
2.开孔范围广，可在开关箱、配电箱、仪表板、铁板穿孔、冲孔，作业便利，冲孔齐平、无毛边。
3.含6种尺寸冲孔模具、2个螺栓、1个垫圈、开孔机本体以及塑料提箱。
4.配上方模可开多种方孔，特殊规格的圆模方模可订制。

FUNCTION

1.Compact, light, fast. It could be used on carbon steel plate for digging round and square holes in 3mmorbelow.Itcould also beused withotherspecific dies of holedigger.Thesolidpositioningdrive leadtoapproachworkingpointeasily.
2.Wide hole digging range.It could be used onswitchboard,power transmission panel,meter plate,steel plate to dig hole or punch hole.Operate conveniently, punched holes smooth without burr.
3.lt covers six kinds of dies,two bolts,one washer,hole digger unit and plastic carrying case.
4.It couldbe used for digging square hole iffitted with square dies.Any specific size of roundand square diescould be ordered.

功能说明

1.紧凑、轻便、快速，可在3mm以下碳钢板上开制圆孔、方孔等，可配合其它特殊开孔模使用，无间断定向驱动，使接近工作点更容易。
2.开孔范围广，可在开关箱、配电箱、仪表板、铁板穿孔、冲孔，作业便利，冲孔齐平、无毛边。
3.含6种尺寸冲孔模具、2个螺栓、1个垫圈、开孔机本体以及塑料提箱。
4.配上方模可开多种方孔，特殊规格的圆模方模可订制。

FUNCTION

1.Compact,light,fast. It could be used on carbonsteel plate for digging round and square holes in3mmorbelow.Itcouldalsobeusedwithotherspecific dies of hole digger.The solid positioning drive lead toapproach working point easily.
2.Wide hole digging range.Itcould be used on switchboard,power transmission panel,meter plate,steel plate todig hole orpunch hole.Operateconveniently, punched holessmoothwithout burr.
3.lt coverssix kindsof dies,two bolts,onewasher,hole digger unitand plastic carrying case.
4.It could be used for digging square hole iffitted with square dies.Any specific size of round and square diescouldbe ordered.

功能说明

1.先以电缆3/8"(9.6mm)冲孔即可让R-1配上1/2”上下刀模，再套上棘轮式活动扳手开始操作。
2.铁板厚度3.2mm不锈钢2.0mm以下。
3.新产品省力型，所穿越的铁屑为两片。
4.不需油压泵浦与油压缸，可节省费用成本低。

FUNCTION

1.First drill 3 / 8 ^ { \circ } ( 9 . 6 \mathsf {mm } ) holeto fit 1 / 2 ^ { \dprime } up and down knife die on R-1.Then put on
ratchetmoveable spanner.Now begin to operate.
2.Steel plate thickness 3 . 2mm .Stainlesssteel 2 . 0 \mathsf {mm } orbelow.
3.Newproductand energysaving.Thescrapistwo pieces of steel.
4.Hydraulic pump and cylinder unnecessary for cost saving.

MAP-60

SYD-35不锈钢水盆开孔器SYD-35StainlessSteelBasinPuncher

?

功能说明

铁铝板厚：1.5-3mm
不锈钢板厚：1.5mm-2mm
吨位：12T
喉深：100mm
重量：12.5kg
模具配置：Φ26mm-35mm
注：出厂已配CP-180泵浦

FUNCTION

Ironaluminum plate thickness:1.5-3mm
Stainlesssteel plate thickness:1.5mm-2mm
Tonnage:12T
Throat depth:100mm
Weight:12.5kg
Mold configuration:Φ26mm-35mm
Note:The factory is equipped with CP-180 pump

圆模及方模Rounddieandsquaredie

功能说明

1.闸刀式剪刀的特点就是比剪刀式的剪刀不易卡住。
2.不需要设定时间。
3.所有刀片都容易更换。
4.180度旋转头部使得不同的剪切位置都容易。

FUNCTION

1.Guillotine type cutters feature less jamming than shear type cutters
2.No set-up time required
3.All bladesareeasilyreplaceable.
4.180degree rotatable headsalloweasycutting position.

功能说明

1.剪切头部可以快速剪切，分体操作。
2.所有装置都可以通过最大油压为700kgf/cm²(10000psi)的任
何液压泵来驱动。
3.所有的装置都配有PT3/8"的高压接头。
4.PT-NPT连接器需要配NPT3/8"牙的快速接头。

FUNCTION

1.Cutting heads provide fast cutting with remote operation.
2.All unitscan be operated byany hydraulic pumpwith the maximumoil pressure
of 700kgf/cm²(10000psi)
3.All units are equipped with PT 3/8" high pressure couplers.
4.PT-NPTadaptersareavailable on request for NPT3/8" treaded couplers.

53 JIMU TOOLS

海国 阿灸

功能说明

1.剪切头部可以快速剪切，分体操作。
2.所有装置都可以通过最大油压为700kgf/cm²(10000psi)的任
何液压泵来驱动。
3.所有的装置都配有PT3/8"的高压接头。
4.PT-NPT连接器需要配NPT3/8"牙的快速接头。

FUNCTION

1.Cutting heads provide fast cuttingwith remote operation.
2.All units can be operated byany hydraulic pumpwith the maximum oil pressure
of 700kgf/cm²(10000psi)
3.All unitsare equipped with PT 3/8"high pressure couplers.
4.PT-NPTadaptersareavailable on request for NPT3/8"treaded couplers.

55 JIMU TOOLS

锻造刀刃，寿命长，剪切容易高强度铝合金手柄注意不能用于剪切钢丝绳和铜硬拉线

Forged knife edge for long shelf life and easy cutting.
Highstrength alalloy handles.
Note: Cutting steel rope and hard drawn copper wiresare prohibited.

八

1

田三

® 二

Co ?

二

O人

59 JIMU TOOLS

银行份 广

1

5 1

二

二

D N

61JIMU TOOLS

二

L 二

9f

川

功能说明

1.当螺丝生锈时，这个螺丝破切器是最有效的工具。
2.独特的带角度的头部，允许直接接触工件。
3.单程，弹簧回油油缸。
4.用途包括：服务型卡车，管道行业，油箱清洗，汽化工厂，钢
铁工程及矿山。
5.选择适当的液压泵组成液压泵系列。

FUNCTION

1.When the nuts get rusts,this nut cuting machine is most time.
2.Unique angled head allows flush access.
3.Single-acting,spring return cylinder.
4.Applications include servicing trucks，piping industry，tank cleaning,
petrochemical,steel construction and mining.
5.Select suitable hydraulic pump form hydraulic pumps series.

功能说明

液压钢筋切断器是最新研制的高精度液压切断工具，改变了之前老款的工作效率，携带方便，外形美观，剪切效率高，受力面积小等特点，是建筑、工厂、矿山等单位的理想工具，深受广大用户的喜爱。

FUNCTION

Hydraulic steel cuting device is the latest development of high-precision hydraulic cuting tool,changing the old paragraph before thework eficiency, easy tocarryeautifulappearance,highearefficency,mallforcereatc., isthe construction,factories,minesand otherunits ldeal tool,loved by the majority of users.

山#

67 JIMU TOOLS

功能说明

1.适用一般水管、导线管、瓦斯管、厚钢管等，角度弯曲90°
2.1/2"-2"一次成形90°，2-1/2“-4”必须移动管子弯曲5次才能
达弯曲弧度。
3.采用坚固的球墨铸铁弯管模材质。
4.弯曲平滑、不会造成皱痕，操作方便。

FUNCTION

1.lt is designed for common water pipe,conductor pipe,gas pipe,thick steel pipe, etc.The bending angle could be 90 degree.
2.For 1 / 2 ^ { \dprime } -2"one operationto be 90degree.For2-1/2"-4",pipemustbemoved and bend for five time to the demanded radian.
3.lt is made of strong nodular cast iron bending pipe mould material.
4.Bended surface smooth without folding marking.It's easy to operate.

功能说明

1.适用一般水管、导线管、瓦斯管、厚钢管等，角度弯曲90°
2 . 1 1 2 " - 2 " 一次成形90°，2-1/2“-4”必须移动管子弯曲5次才能达弯曲弧度。
3.采用坚固的球墨铸铁弯管模材质。
4.弯曲平滑、不会造成皱痕，操作方便。
5.单孔式与复动式油压缸，复动式必需配双回路泵浦CTE-25AD。6.油管接头配PT3/8"牙。

FUNCTION

1.It is designed for common water pipe,conductor pipe,gas pipe,thick steel pipe, etc.Bending angle could be 90 degree.
2.For 1 1 2 ^ { \circ } - 2 ^ { \circ } one operation to be 90 degree.For2-1/2"-4",pipemust be moved and bend for five time to the demanded radian.
3.It is made of strong nodular cast iron bending pipe mould material.
4.Bended surfacesmoothwithout foldingmarking.Operateconveniently.
5.Single holeand dual active cylinder:Dual active style must work with double loop pump CTE-25AD.
6.Oil pipe coupling fited with PT3/8"thread.

71 JIMU TOOLS

CK整体式液压拉马

Integral-UnitHydraulic GearPullerCK

EP分体式液压拉马

Split-Unit Hydraulic Gear Puller EP

功能说明

1.利用新型油压拔轮工具，操作轻而易举。
2.一般传统式拔轮，使用起来较费力。
3.可以自由旋转，依拔轮距离活塞中心点，很快可碰到被拔的中心点。
4.30ton以上的油缸必须配大油量的油泵，如CP-700-2A。
5.油管接头配PT3/8"牙。

FUNCTION

1.The new type of oil pressure pull wheel tool adopted for easy operation.
2.Traditional ordinarypull wheel leading to great effort needed.
3.Freely rotate. Upon the center point from pull wheel to piston,the center point to be pulled is easily met.
4.The cylinder in 30ton orabove must be assembled with large oil tank pump.For example, CP-700-2A.
5.Oil pipe coupler fitted with PT 3/8"thread.

功能说明

1.适于维修，检修、测试和阀门更换应用。
2.整体分离楔概念：无摩擦，平行平常运动。
3.消除法兰损伤和分离楔损坏的危险。
4.独特的互锁楔子设计-第一级无弯曲无滑脱危险。
5.插入口要求尺寸仅为6mm。
6.台阶形张臂的设计使每格台阶可承受满负荷。
7.较少的运动部件，经久耐用，维护方便。

FUNCTION

1.Suitableformaintenance,overhaul,testing,andvalvereplacementYing Yong.
2.Asawholewedge of the concept of separation:no friction,parallel movement
usually.
3.Toeliminateseparationwedge flange damageand the risk of damage to.
4.Unique interlocking wedge design-first-class non-bending risk of non-slip.
5.Insert laskedmeasuring only 6mm.
6.Stepped Zhang arm design so that each cell can withstand full load step.
7.Less moving parts, durable,easy to maintain.

73 JIMU TOOLS

功能说明

轻型宜人的设计易使用。从70-216mm的可调尖端宽度，应用范围广。单作用，弹簧回位。

FUNCTION

Lightweight,easytocarryandsimple tooperate.
Thewedgebreadthadjustable from70 to216mm.
Single-acting,spring return.

共

#

二

功能说明

该产品广泛应用于工程机械、电力、石油、矿山、煤炭、冶金、造纸、建筑、港口、索道等行业，电缆地下通道展放或地面展放，延放电缆及导线，产品分为单轮和三轮，不易损坏电缆。

FUNCTION

The productiswidely used in engineering machinery,electric power,petroleum, mining，coal，metallurgy，papermaking,construction,port,cableandother industries,cable tunnels show exhibition place or on the ground put the extension cableandwirerelease,the product isdivided intosingle-roundand three,non-fragile cables.

I L2

75 JIMU TOOLS

功能说明

用于架空电力线路调整弧垂和收紧导线。采用高强度铝钛合金材料精锻成型、自重轻，体积小。适用于铝绞线和钢芯铝绞线。

FUNCTION

Adjustment for overhead power linessagand tightenwire. Using high-strength aluminumalloymaterials,precision forgingshape,lightweight,small size. Applicable to aluminum and ACSR stranding.

功能说明

1.用于电力工程，电信工程收紧导地线或牵引设备，打拉线用。2.采用高强度钢丝，强力不易被拉断，钩头为合金钢锻制。且钩头部分为椭圆形带保险装置，美观，强度高。3.手柄可360度旋转，控制卡钰可倒向旋转，使用方便。

FUNCTION

1.Usedinpowerengineering，telecommunicationsengineeringoratraction device to tighten the lead ground,playingwith the pull.
2.Using high-strengthsteel wire,not easilypulledoffastrong,forgedalloy steel hook for the system.And the majority of oval-shaped hook witha safety device aesthetics, high strength.
3.Handle can be rotated 360 degrees,the control card can be turned to rotate Civil easy to use.

77 JIMU TOOLS

功能说明

1.适用于铝塑管、PEX管、PB管等与铜管件、铜接头连接，卡压
不锈钢套、铜套、铝套。
2.液压系统稳定 \Rightarrow 压接质量稳定几乎免维修。
3.剪刀式开口=>压接作业有最小对墙面尺寸。
4.封压头部可以旋转 \Rightarrow 便利作业角度。
5.自动泄压装置=>确保压接出力。
6.轻巧容易携带。
7.双速进油设计，压接速度快。

FUNCTION

1.Foraluminum-plastic pipe,PEXpipes,PB pipesand other fitingswith brass, copper connector connection,compression stainless steel sets,coppersleeve, aluminum cover.
2.Stable hydraulicsystemto ensure stablecrimping quality.Maintenance is almost unnecessary.
3.Knife style opening.Crimpingwork could be go to narrowspace.
4.Crimping head couldbe rotated for convenient workingangle.
5.Automatic pressure releaseunite toensure efficient crimping force output.
6.Light weight for easy carrying.
7.Due speed oil input design to ensure fast crimping speed.

分离式液压卡压钳

功能说明

1.适用于屋内外工程，各种压接角度和狭窄的工作空间。
2.不锈钢管件专用工具液压式压接，六角形设计，不容易脱落。
3.出厂配压模按国家尺寸，如不同可另订做。
4.自动泄压装置 \Rightarrow 确保压接出力。
5.轻巧容易携带。
6.配合单动式脚踏泵、手动泵、电动泵使用。
7.油管接头配PT3/8"牙。

Crimping tool forstainless pipe FUNCTION

1.Foraluminum-plastic pipe,PEX pipes,PB pipes and other fitings with brass, copperconnectorconnection,compressionstainlesssteelsets,coppersleeve, aluminum cover.
2.Stable hydraulic system to ensure stable crimping quality.Maintenance is almostunnecessary.
3.Knife style opening. Crimping work could be go to narrowspace.
4.Crimping head could be rotated for convenient workingangle.
5.Automatic pressure release unite to ensure efficient crimping force output.
6.Light weight for easy carrying.
7.Due speed oil input design to ensure fast crimping speed.

功能说明

压接铜管、不锈钢管及铜管套管，它也用于压接水管、电气管及化工管道。

FUNCTION

CrimpthecoppripnssteledoppripedItissoedforimpigteaterpiectricendal

FT-65100不锈钢压管工具

FT-1550不锈钢压管工具

CW-1632拉管工具

CW-1632拉管工具全套系列

1 BX-30S

81JIMU TOOLS

大

BH-3008A

型号：HS-D1
压接能力Capacity:0.5-6.0mm2
长度Length:205mm
重量Weight:0.30kg
型号：HS-D2
压接能力Capacity:0.5-6.0mm²
长度Length:205mm
重量Weight:0.30kg
二 1 SOK E 一$ ce
83 JIMU TOOLS
A

功能说明

压接钳用于非焊接的，符合标准的电气连接，所有零部件都采用特殊钢制作，经特殊淬火和退火处理，口模头部磨光处理，寿命特长，依端子大小调整口径。

FUNCTION

Thecrimping toolsisused for non-weldingand standardelectrical connection. All the componentsaremadeof special steel,treatedbyspecial quenchingand annealing.The head of the month tool has beenpolished.The tools iswith the characteristicsof longlifeandthediameterofthecrimpingmonthcanbe adjusted according to the size of the terminal.

功能说明

1.裸端子专用（压后呈六角形）2.压接钳用于非焊接的，符合标准的电气连接，精密的口模材质为SCM-40超硬工具钢制造而成，寿命特长，孔径尺寸精确，压著效果佳。

FUNCTION

1.For non-insulated cable links. 2.The crimping tools is used for non-welding and standard electrical connection.The mouldof jawismadeofSCM-40 hardest tool steel.Itiswiththecharacteristicsof long life,accurate borediameterand good crimpingeffect.

85 JIMU TOOLS

S0 二 /

LE HIlaJIMUTOOLSE

用于非焊接的，符合标准的电气连接，适合管状裸端子及管状预绝缘端子。压接时只要将端子侧向进入压线钳，根据端子所要求的挤压力度达到时，强制制动装置才会使压接钳口自动松开，保证在反复压线时能保持较高质量的压线标准。由于设定了最佳的握柄位置，以及采用轻便紧凑的结构和符合人体工程学原理的手柄形状的设计，使操作时减轻了疲劳度。

It isapplicable for tubular bare terminals and pre-insulated terminal on non-welding connectioncompliedwithstandard electrical connection.Whencrimping,the terminal shouldbeputintocrimpingpliers laterally.Thedemandedpressingforcemustbe reachedbefore thebrakeunitautomaticallyrelease the jawof thepliers.Thushighquality crimping standard could be ensured during repeatedly crimping.Due to perfect gripping position fixed and logical and light structure and the handle shape designmeeting human being engineering principle,it reduces fatigue degree.

设计独特，轻巧省力；压紧时，握力可均匀地传至各个压线口（4个或6个），由于设计合理，符合力学原理，钳身仅为175mm，而重量只有360g。

O 二 CRIMPFOXUD6-

The design is unique due to lightweightand saving energy.When crimping tightly,the gripping forcewould evenly transfer toallthe section(6 or6 spots) of crimping terminal. Becauseof reasonabledesigncomplied with human being engineeringprinciple,the weight of the pliers isonly 360g and the lengthof the pliers body isonly175mm.

用于非焊接的，符合标准的电气连接，适合管状裸端子及管状预绝缘端子。压接时只要将端子侧向进入压线钳，根据端子所要求的挤压力度达到时，强制制动装置才会使压接钳口自动松开，保证在反复压线时能保持较高质量的压线标准。

It isapplicablefor tubular bare terminalsandpre-insulated terminal on non-welding connection complied with standard electrical connection.When crimping,the terminal shouldbeputintocrimpingpliers laterally.Thedemandedpressingforcemustbe reached before the brake unit automatically release the jawof the pliers.Thus high quality crimping standard could be ensured during repeatedly crimping.

川川/二

O 二 二 附棘轮装置，操作轻便，防锈效果好，压著寿命可达30000次以上。 Fitted with ratchet unit for easy operation and good rust resistant. Crimping shelf lifecould reachto 30oo0 timesorabove.

三/川川

1

47 八二

1

1二

换向阀门 Reversing Valve 液压工具专用液压油(15#,32#) Special hydraulicoil for hydraulic tools(15#,32#)

C-18M 免锁牙尖头超高压快速接头 Lock free tip head ultra high pressure quick coupler

H形夹模

液压泵浦检压表
常用压力：700kgf/cm
螺纹：3/8"PT
Hydraulic pump pressure tester
Common pressure:7ookgf/cm²
Thread:3/8"PT

C形夹模

O

超高压钢丝强化油管
常用压力：700kgf/cm
螺纹：3/8"PT
Ultra high pressure steel reinforced
oilpipe
Common pressure:7ookgf/cm²
Thread:3/8"PT
C-19M
锁牙钢珠头超高压快速接头
Locksteelball headultra high
pressure quick coupler
Thread:3/8"PT

12ton压力机检压表
12 Ton pressure tester

各种大小油封O型圈橡皮圈

C-18
快速接头
quickcoupler
锁牙钢珠头超高压快速接头
Lock steel ball head ultra high
pressure quick coupler
Thread:3/8"PT

ISO9001 CE

RJIMU吉牧工具奇之力

玉环吉牧机械工具有限公司YUHUAN JIMUMACHINERYTOOLSCO.,LTD.（玉环县台震电力工具厂）

地址：浙江省玉环县楚门镇筠岗工业区Add: Jungang Industrial Zone, Chumen Town,Yuhuan,Taizhou City， ZhejiangProvince, China电话（Tel） :+86-576-87443633 87443636 87426768传真（Fax）:+86-576-8742336687421616E-mail: qzl@qzltools.c0m E-mail:13967686718@139.comQQ：1159329118 Http://www.qzltools.com