该页无缩略图
Model: T9-201 stainless steel Two stage force small angle damping hinge (3D Quick release)
OVERLAYTABLE 盖位计算表
Full Overlay 全盖门
Half Overlay 半盖门
| DH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 19 | 20 | 21 | 22 | 23 |
| 2 | 17 | 18 | 19 | 20 | 21 |
| 4 | 15 | 16 | 17 | 18 | 19 |
| DH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 9 | 10 | 11 | 12 | 13 |
| 2 | 7 | 8 | 9 | 10 | 11 |
| 4 | 5 | 6 | 7 | 8 | 9 |
Inset 内嵌门
| AH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 1 | 0 | -1 | -2 | -3 |
| 2 | 3 | 2 | 1 | 0 | -1 |
| 4 | 5 | 4 | 3 | 2 | 1 |
可选配件 / Optional Accessories
表面处理/Finishes
01
不锈钢 201/304
Stainless
steel 201/304
02 镀镍 Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
两孔底座 Two hole base H=0/H=2
欧式二孔底座European styletwo hole baseH=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
ø8x12mm 塑料胶栓 Plastic rubber bolt ø10x12mm 塑料胶栓 Plastic rubber bolt
ø5x11mm 塑料双桥 Plastic double bridge
T9-201不锈钢二段力小角度阻尼铰链(固装)
· 阻尼铰链
TECHNICAL SPECIFICATION产品描述
• 适用于开启角度105°厚度16-22mm的门板
• 材质：201不锈钢
• 表面处理：高度精抛
• 拉出式小角度缓冲
• EN15570标准，开合寿命长，稳定性高
· 固装式
• 盖位调节：总行程7mm
·门缝调节：总行程8mm
• Damped hinges
• Suitable for door panels with an opening angle of 105° and a thickness of 16-22mm
• Material: 201 stainless steel
• Surface Treatment: High precision polishing
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Fixed
• Cover adjustment: total stroke 7mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒∅8mm expansive dowel | E08 | M8 胶粒∅8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 ∅ 10mm expansive dowel | E10 | M10 胶粒 ∅ 10mm dowel | D10 |
ø4x9mm 平咀螺丝
Model: T9-201 stainless steel Two stage force small angle damping hinge (fixed)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
| DH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 19 | 20 | 21 | 22 | 23 |
| 2 | 17 | 18 | 19 | 20 | 21 |
| 4 | 15 | 16 | 17 | 18 | 19 |
| DH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 9 | 10 | 11 | 12 | 13 |
| 2 | 7 | 8 | 9 | 10 | 11 |
| 4 | 5 | 6 | 7 | 8 | 9 |
Inset 内嵌门
| AH | 3个 | 4 | 5 | 6 | 7 |
| 0 | 1 | 0 | -1 | -2 | -3 |
| 2 | 3 | 2 | 1 | 0 | -1 |
| 4 | 5 | 4 | 3 | 2 | 1 |
HINGE ADJUSTMENT 铰链的调节
Depth Adjustment 深度调整
Overlay Adjustment 水平调整
调整后方螺丝以调节柜门间隙。
总调节量为：8mm
旋转调节丝以增加或减少门板覆盖量。
Rotate depth screw to adjust door gap.
Adjust range: 8mm
总调节量为：7mm
Rotate lateral screw to increase or decrease door overlay. Adjust range : 7mm
Height Adjustment 高度调整
通过安装在侧板上的底座进行调节。
Adjust the mounting plate on panel to adjust the door's height.
建议：调节参数为产品设计参数，柜体实际尺寸和钻孔及安装方式可能对参数产生影响。
Notice: The reference adjustment range is the product design range,
the actual size of the cabinet and the drilling method may have a certain impact on the parameters.
可选配件 / Optional Accessories
表面处理/Finishes
UI
不锈钢 201/304
Stainless
steel 201/304
02
镀镍
Nickeling
03
钛金
Titanium gold
04
黑镍
Black Nickel
可选底座螺丝/Base screw
ø4x16mm 木牙螺丝
Wood screw
38x12mm 塑料胶栓 Plastic rubber bolt
Flat headed screw
ø10x12mm 塑料胶栓 Plastic rubber bolt
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
铰杯装饰盖 Hinge cup
T9 125°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度125°厚度16-40mm的门板
•材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程±3mm
·门缝调节：总行程±2，-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 125° and a thickness of 16-40mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ± 2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
Model: T9 125° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
Half Overlay 半盖门
| DH | 14个 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| D | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Inset 内嵌门
| DH4 | -6 | -5 | -4 | -3 | -2 | -1 | 0 | 1 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
可选配件 / Optional Accessories
表面处理/Finishes
01
不锈钢 201/304
Stainless
steel 201/304
02 镀镍 Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
两孔底座 Two hole base H=0/H=2
移位底座 Shifting base H=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
ø8x12mm 塑料胶栓 Plastic rubber bolt
92°定位塑料件92°positioningplastic part
T9 125°二段力小角度阻尼铰链(快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
适用于开启角度125°厚度16-40mm的门板
• 材质：上海宝钢
•表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
快装式
•盖位调节：总行程±3mm
·门缝调节：总行程±2，-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 125° and a thickness of 16-40mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ±2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
Model: T9 125º Two stage force small angle damping hinge (Quick release)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
| DH | 14个 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Half Overlay 半盖门
| DH | 5个 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Inset 内嵌门
| D | -6 | -5 | -4 | -3 | -2 | -1 | 0 | 1 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
可选配件 / Optional Accessories
表面处理/Finishes
01
不锈钢 201/304
Stainless
steel 201/304
02 镀镍 Nickeling
04 黑镍 Black Nickel
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
两孔底座 Two hole base H=0/H=2
欧式二孔底座European styletwo hole baseH=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
ø8x12mm 塑料胶栓 Plastic rubber bolt
ø5x11mm 塑料双桥 Plastic double bridge
92°定位塑料件92°positioningplastic part
T9 125°二段力小角度阻尼铰链(固装)
TECHNICALSPECIFICATION产品描述
•阻尼铰链
•适用于开启角度125°厚度16-40mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
·拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
• 固装式
•盖位调节：总行程±3mm
•门缝调节：总行程±2，-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 125° and a thickness of 16-40mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
· Fixed
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ± 2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
Model: T9 125° Two stage force small angle damping hinge (fixed)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
| DH | 14个 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| DH | 5个 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Inset 内嵌门
| DHH4 | -6 | -5 | -4 | -3 | -2 | -1 | 0 | 1 |
| 0 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
HINGE ADJUSTMENT 铰链的调节
Depth Adjustment 深度调整
调整后方螺丝以调节柜门间隙。
总调节量为：±2，-3mm
Rotate depth screw to adjust door gap. Adjust range:±2, -3mm
Overlay Adjustment 水平调整
旋转调节丝以增加或减少门板覆盖量。
总调节量为：±3mm
Rotate lateral screw to increase or decrease door overlay. Adjust range: ± 3mm
Height Adjustment 高度调整
通过安装在侧板上的底座进行调节。总调节量为：±2mm
Adjust the mounting plate on panel to adjust the door's height.Adjust range : ±2mm
建议：调节参数为产品设计参数，柜体实际尺寸和钻孔及安装方式可能对参数产生影响。
Notice: The reference adjustment range is the product design range,
the actual size of the cabinet and the drilling method may have a certain impact on the parameters.
可选配件 / Optional Accessories
表面处理/Finishes
01
不锈钢 201/304Stainless
steel 201/304
02 镀镍 Nickeling
03
钛金
Titanium gold
04
黑镍
Black Nickel
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝
Wood screw
38x12mm 塑料胶栓 Plastic rubber bolt rubber bolt
ø4x9mm 平咀螺丝
Flat headed screw
ø10x12mm 塑料胶栓 Plastic rubber bolt
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
92°定位塑料件92°positioningplastic part
T9 155°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度155°厚度18-25mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
·拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程±3mm
•门缝调节：总行程+2,-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 155° and a thickness of 18-25mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ± 2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
ø4x16mm 木牙螺丝 Wood screw
Model: T9 155° Two stage force small angle damping hinge (Turbine 3D Quick release)
SPECIAL APPLICATION 特殊应用
Full cover hinge 全盖铰链
切角门一侧边拼接，门板重叠部分较大18/26 mm
标准底座， 垫高0mm尺寸,底座规格为H=37mm时
切角门-四面拼接，门板重叠部分较大18/18mm
切角门-四面拼接，门板重叠部分较大18/18mm
标准底座，垫高0mm
尺寸,底座规格为H=37mm时
名称开启角度OW
角度限制着92°
若为独立式柜体，可选择任意面板厚度FD的面板
两柜体相邻或柜体靠墙安装时，建议测试柜门能否正常开合。
较薄的材料一突出16+6mr
可选配件 / Optional Accessories
表面处理/Finishes
Stainless
不锈钢 201/304
steel 201/304
02
镀镍
Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
Two hole base H=0／H=2
两孔底座
可选底座螺丝/ Base screw
ø10x12mm 塑料胶栓 Plastic rubber bolt
ø5x11mm 塑料双桥 Plastic double bridge
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
T9 155°二段力小角度阻尼铰链(快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度155°厚度18-25mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
·快装式
•盖位调节：总行程±3mm
•门缝调节：总行程+2,-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 155° and a thickness of 18-25mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ± 2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
Model: T9 155° Two stage force small angle damping hinge (Quick release)
SPECIAL APPLICATION 特殊应用
Full cover hinge 全盖铰链
切角门一侧边拼接，门板重叠部分较大18/26 mm
切角门-四面拼接，门板重叠部分较大18/18mm
标准底座， 垫高0mm尺寸,底座规格为H=37mm时
切角门-四面拼接，门板重叠部分较大18/18mm
标准底座，垫高0mm
尺寸,底座规格为H=37mm时
名称开启角度OW
角度限制着92°
若为独立式柜体，可选择任意面板厚度FD的面板
两柜体相邻或柜体靠墙安装时，建议测试柜门能否正常开合。
较薄的材料一突出16+6mr
可选配件 / Optional Accessories
表面处理/Finishes
Stainless
不锈钢 201/304
steel 201/304
02
镀镍
Nickeling
04 黑镍 Black Nickel
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
移位底座 Shifting base H=0/H=2
Two hole base H=0／H=2
两孔底座
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
ø10x12mm 塑料胶栓 Plastic rubber bolt
ø5x11mm 塑料双桥 Plastic double bridge
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
T9 155°二段力小角度阻尼铰链(固装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度155°厚度18-25mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
·拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
·固装式
•盖位调节：总行程±3mm
•门缝调节：总行程+2,-3mm
•上下调节:总行程±2mm
• Damp hinge
• Suitable for door panels with an opening angle of 155° and a thickness of 18-25mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
· Fixed
• Cover adjustment: total stroke ± 3mm
• Door seam adjustment: total travel ± 2, -3mm
• Up and down adjustment: total stroke ± 2mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
铰臂装饰盖 Hinge arm
若为独立式柜体，可选择任意面板厚度FD的面板
Model: T9 155° Two stage force small angle damping hinge (fixed)
SPECIAL APPLICATION特殊应用
Full cover hinge 全盖铰链
切角门一侧边拼接，门板重叠部分较大18/26 mm
切角门-四面拼接，门板重叠部分较大18/18mm
标准底座，垫高0mm
尺寸,底座规格为H=37mm时
名称开启角度OW
角度限制着92°
标准底座， 垫高0mm尺寸,底座规格为H=37mm时
较薄的材料一突出16+6mr
HINGE ADJUSTMENT 铰链的调节
Depth Adjustment 深度调整
调整后方螺丝以调节柜门间隙。
总调节量为：±2，-3mm
Rotate depth screw to adjust door gap.
Adjust range:±2, -3mm
Overlay Adjustment 水平调整
旋转调节丝以增加或减少门板覆盖量。
Rotate lateral screw to increase or decrease door overlay. Adjust range: ± 3mm
Height Adjustment 高度调整
通过安装在侧板上的底座进行调节。总调节量为：±2mm
Adjust the mounting plate on panel to adjust the door's height.Adjust range : ± 2mm
建议：调节参数为产品设计参数，柜体实际尺寸和钻孔及安装方式可能对参数产生影响。
Notice: The reference adjustment range is the product design range,
the actual size of the cabinet and the drilling method may have a certain impact on the parameters.
可选配件 / Optional Accessories
表面处理/Finishes
不锈钢 201/304
Stainless
steel 201/304
02
镀镍
Nickeling
03
钛金
Titanium gold
可选底座螺丝/Base screw
ø4x16mm
木牙螺丝
04
黑镍
Black Nickel
Wood screw
38x12mm
塑料胶栓
rubber bolt
Flat headed screw
ø10x12mm
可选装饰盖/Decorative cover
铰杯装饰盖 Hinge cup
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 /8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度30°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程7mm
门缝调节：总行程3.5mm
上下调节: 总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 30° and a thickness of 16-22mm
• Material: Baosteel
· Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
Model: T9 30° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置/Hinge base 欧式移位脚 European style shifting feet |  | 移位底座 Shifting base |  | 四孔底座 Four hole base H=0/H=2 |  | ||||||
| H=0/H=2 两孔底座 | H=0/H=2 欧式二孔底座 European style | 双桥二孔底座 Double bridge | |||||||||
| Two hole base H=0/H=2 |  | two hole base H=0／H=2 |  | two hole base H=2 |  | ||||||
| 可选装饰盖/Decorative cover | |||||||||||
| 可选底座螺丝/Base screw | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | ø4x9mm 平咀螺丝 Flat headed screw |  | ø7.7x4.7x15 mm 双桥螺丝 Double bridge screw |  | x6.33x17.6 mm 欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt | ø10x12mm 塑料胶栓  Plastic rubber bolt |  |  | 铰杯装饰盖 Hinge cup |  | ||||||
T9 30°二段力小角度阻尼铰链(快装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度30°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
• 快装式
• 盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of 30° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
Model: T9 30º Two stage force small angle damping hinge (Quick release)
OVERLAYTABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base 欧式移位脚 European style |  | 移位底座 Shifting base |  | 四孔底座 Four hole base |  | ||||||
| shifting feet H=0/H=2 两孔底座 | H=0/H=2 欧式二孔底座 | H=0/H=2 双桥二孔底座 | |||||||||
| Two hole base H=0/H=2 |  | European style two hole base H=0/H=2 |  | Double bridge two hole base H=2 |  | ||||||
| 可选底座螺丝/ Base screw 可选装饰盖/Decorative cover ø8.8 | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | ø4x9mm 平咀螺丝 Flat headed screw | ø7.7x4.7x15  | mm 双桥螺丝 Double bridge screw |  | x6.33x17.6 mm 欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt | ø10x12mm 塑料胶栓  rubber bolt |  |  | 铰杯装饰盖 Hinge cup |  | ||||||
T9 -30°二段力小角度阻尼铰链(涡轮移位快装)
·阻尼铰链
TECHNICAL SPECIFICATION产品描述
• 适用于开启角度-30°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
• 移位快装式
•盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of -30° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
Model: T9 -30° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | ||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金  Titanium gold | 04 黑镍 Black Nickel | ||||||
| 可选底座配置/ Hinge base | ||||||||||
| 欧式移位脚 European style shifting feet H=0/H=2 |  | 移位底座 Shifting base H=0/H=2 |  | 四孔底座 Four hole base H=0/H=2 |  | |||||
 | 欧式二孔底座 European style two hole base |  | 双桥二孔底座 Double bridge two hole base | |||||||
| Two hole base H=0／H=2 | H=0/H=2 | H=2 |  | |||||||
| 可选装饰盖/Decorative cover | ||||||||||
| 可选底座螺丝/ Base screw ø4x9mm | ||||||||||
| ø4x16mm 木牙螺丝 Wood screw | 平咀螺丝  Flat headed screw | ø7.7x4.7×15 mm  双桥螺丝 Double bridge screw | ø8.8 x6.33x17.6 mm  欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||||
| ø8x12mm 塑料胶栓 Plastic rubber bolt |  | ø10x12mm 塑料胶栓 Plastic rubber bolt |  | ø5x11mm 塑料双桥 Plastic double bridge |  | 铰杯装饰盖 Hinge cup |  | |||
T9 -30°二段力小角度阻尼铰链（移位快装）
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度-30°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
· 快装式
• 盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of -30° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base 欧式移位脚 European style shifting feet |  | 移位底座 Shifting base |  | 四孔底座 Four hole base H=0/H=2 |  | ||||||
| H=0/H=2 两孔底座 Two hole base | H=0/H=2 欧式二孔底座 European style |  | 双桥二孔底座 Double bridge | ||||||||
| H=0/H=2 |  | two hole base H=0/H=2 | two hole base H=2 |  | |||||||
| 可选装饰盖/Decorative cover | |||||||||||
| 可选底座螺丝/ Base screw ø4x9mm | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | 平咀螺丝 Flat headed screw |  | mm 双桥螺丝 Double bridge screw |  | mm 欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt | ø10x12mm 塑料胶栓  Plastic rubber bolt | ø5x11mm  double bridge | 铰杯装饰盖  Hinge cup |  | |||||||
Model: T9 -30° Two stage force small angle damping hinge (Quick release)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
T9 -30°二段力小角度阻尼铰链(固装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度-30°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
• EN15570标准，开合寿命长，稳定性高
• 固装式
• 盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of -30° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Fixed
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
| 表面处理/Finishes | ||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||
| 可选底座螺丝/ Base screw | ||||||||
| ø4x16mm 木牙螺丝 | ø4x9mm 平咀螺丝 | 铰臂装饰盖 | 可选装饰盖/Decorative cover | |||||
| Wood screw 38x12mm |  | Flat headed screw ø10x12mm |  |  | ||||
| 塑料胶栓 Plastic rubber bolt |  | 塑料胶栓 Plastic rubber bolt |  |  | ||||
Model: T9 -30° Two stage force small angle damping hinge (fixed)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
HINGE ADJUSTMENT 铰链的调节
Depth Adjustment 深度调整  | Overlay Adjustment 水平调整  | Height Adjustment 高度调整 |  | |
| 调整后方螺丝以调节柜门间隙。 总调节量为：8mm Rotate depth screw to adjust door gap. Adjust range: 8mm | 旋转调节丝以增加或减少门板覆盖量。 总调节量为：8mm Rotate lateral screw to increase or decrease door overlay. Adjust range : 8mm | 通过安装在侧板上的 底座进行调节。 Adjust the mounting plate on panel to adjust the door's height. | ||
| 建议：调节参数为产品设计参数，柜体实际尺寸和钻孔及安装方式可能对参数产生影响。 Notice: The reference adjustment range is the product design range, | ||||
可选配件 / Optional Accessories
T9 45°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度45°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
•移位快装式
•盖位调节：总行程7mm
门缝调节：总行程3.5mm
•上下调节:总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 45° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
•Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
Model: T9 45° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAYTABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base 欧式移位脚 | |||||||||||
| European style shifting feet H=0/H=2 |  | 移位底座 Shifting base H=0/H=2 |  | 四孔底座 Four hole base H=0/H=2 |  | ||||||
| 欧式二孔底座 | 双桥二孔底座 Double bridge | ||||||||||
| 两孔底座 Two hole base H=0/H=2 |  two hole base H=0/H=2 | European style |  | two hole base H=2 |  | ||||||
| 可选装饰盖/Decorative cover | |||||||||||
| 可选底座螺丝/ Base screw ø4x9mm 平咀螺丝 | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  Flat headed screw |  ø10x12mm | mm 双桥螺丝  Double bridge screw | mm 欧式螺丝 European style screw | x6.33x17.6  | 铰臂装饰盖 Hinge arm |  | ||||
| ø8x12mm 塑料胶栓 Plastic rubber bolt |  rubber bolt | ø5x11mm 塑料双桥 Plastic double bridge |  | 铰杯装饰盖 Hinge cup | |||||||
T9 45°厚门二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
•适用于开启角度45°厚度18-25mm的门板
• Surface Treatment: Nickel plated
• EN15570 standard, long opening and closing life, high stability
• Up and down adjustment: total stroke 3.5mm
Model: T9 45° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
45角度柜体
| ATK | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 4 | 3 | 3 | 5 | 5 | 6 | 6 | 7 | 7 |
可选配件 / Optional Accessories
表面处理/Finishes
02
镀镍
Nickeling
可选底座配置/Hinge base
European style shifting feet H=0/H=2
两孔底座 Two hole base H=0/H=2
四孔底座Four hole baseH=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
T9 45°二段力小角度阻尼铰链(快装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度45°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
• EN15570 标准，开合寿命长，稳定性高
· 快装式
• 盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of 45° and a thickness of 14-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
Model: T9 45° Two stage force small angle damping hinge (Quick release)
OVERLAYTABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
表面处理/Finishes
02
镀镍
Nickeling
可选底座配置/Hinge base
European style shifting feet H=0/H=2
两孔底座 Two hole base H=0/H=2
四孔底座Four hole baseH=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
T9 -45°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度-45°厚度16-22mm的门板
• 材质：上海宝钢
•表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
• 移位快装式
• 盖位调节：总行程8mm
• Damp hinge
·门缝调节：总行程8mm
• Suitable for door panels with an opening angle of -45° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
Model: T9 -45° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAYTABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base 欧式移位脚 European style |  | 移位底座 Shifting base |  | 四孔底座 |  | ||||||
| shifting feet H=0/H=2 两孔底座 | H=0/H=2 欧式二孔底座 | Four hole base H=0/H=2 双桥二孔底座 | |||||||||
| Two hole base H=0/H=2 |  | European style two hole base H=0/H=2 |  | Double bridge two hole base H=2 |  | ||||||
| 可选底座螺丝/ Base screw ø4x9mm | ø7.7x4.7x15 mm | ø8.8 x6.33x17.6 mm | 可选装饰盖/Decorative cover | ||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | 平咀螺丝 Flat headed screw |  ø10x12mm | 双桥螺丝 Double bridge screw |  | 欧式螺丝 European style screw ø5x11mm |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt | 塑料胶栓  Plastic rubber bolt |  |  | 铰杯装饰盖 Hinge cup  | |||||||
T9 -45°二段力小角度阻尼铰链(移位快装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度-45°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
· 快装式
• 盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of -45° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base 欧式移位脚 European style |  | 移位底座 Shifting base | 四孔底座 |  | |||||||
| shifting feet H=0/H=2 两孔底座 Two hole base |  | H=0/H=2 | Four hole base H=0/H=2 | ||||||||
| 欧式二孔底座 European style two hole base H=0/H=2 |  | 双桥二孔底座 Double bridge two hole base H=2 |  | ||||||||
| 可选装饰盖/Decorative cover | |||||||||||
| 可选底座螺丝/ Base screw ø8.8 | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | ø4x9mm 平咀螺丝 Flat headed screw | ø7.7x4.7x15 mm 双桥螺丝 Double bridge screw | x6.33x17.6  欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||||
| ø8x12mm 塑料胶栓 Plastic rubber bolt |  | ø10x12mm 塑料胶栓 Plastic rubber bolt | ø5x11mm 塑料双桥 Plastic double bridge |  | 铰杯装饰盖 Hinge cup |  | |||||
Model: T9 -45° Two stage force small angle damping hinge (3D Quick release)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
T9 -45°二段力小角度阻尼铰链(固装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
• 适用于开启角度-45°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
· 固装式
• 盖位调节：总行程8mm
•门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of -45° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Fixed
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
| 表面处理/Finishes | ||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||
| 可选底座螺丝/ Base screw ø4x16mm | ø4x9mm 平咀螺丝 | 可选装饰盖/Decorative cover | ||||
| 木牙螺丝 Wood screw 38x12mm |  | Flat headed screw ø10x12mm |  | 铰臂装饰盖 Hinge arm |  | |
| 塑料胶栓 Plastic rubber bolt |  | 塑料胶栓 Plastic rubber bolt |  | 铰杯装饰盖 Hinge cup |  | |
Model: T9 -45° Two stage force small angle damping hinge (fixed)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
HINGE ADJUSTMENT 铰链的调节
Depth Adjustment 深度调整  | Overlay Adjustment 水平调整  | Height Adjustment 高度调整 | E  | |
| 调整后方螺丝以调节柜门间隙。 总调节量为：8mm Rotate depth screw to adjust door gap. Adjust range : 8mm | 旋转调节丝以增加或减少门板覆盖量。 总调节量为：8mm Rotate lateral screw to increase or decrease door overlay. Adjust range : 8mm | 通过安装在侧板上的 底座进行调节。 Adjust the mounting plate on panel to adjust the door's height. | ||
可选配件 / Optional Accessories
T9 90°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度90°厚度16-22mm的门板
•材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程7mm
·门缝调节：总行程3.5mm
•上下调节:总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 45° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
Model: T9 90° Two-stage force small-angle damping hinge (Turbine 3D Quick release)
OVERLAYTABLE盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
表面处理/Finishes
不锈钢 201/304
steel 201/304
02
镀镍
Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
Two hole base H=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
铰臂装饰盖 Hinge arm
T9 90°厚门二段力小角度阻尼铰链(涡轮移位快装)
TECHNICALSPECIFICATION产品描述
•阻尼铰链
•适用于开启角度90°厚度16-26mm的门板
•材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程7mm
•门缝调节：总行程3.5mm
•上下调节: 总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 45° and a thickness of 16-26mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
•Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
ø4x16mm 木牙螺丝 Wood screw
lodel: T9 90° Thick door second-stage low-force angle damping hinge (Turbine 3D Quick release)
OVERLAYTABLE 盖位计算表
Internal masking 内掩式
工厂设定的铰链尺寸和维隙计算（底座垫高=3mm）完全开启时的门突距
二厂设定中，适用于倒角半径(R=1mm)面板的最小缝隙A
A=8mm-K A 间隙 K 铰杯边距
| AK | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 3 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 1.4 | 2.3 | 3.3 |
| 4 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.8 | 1.7 | 2.7 |
| 5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.7 | 1.1 | 2.0 |
| 6 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.7 | 0.9 | 1.5 |
| 7 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.8 | 0.9 | 1.2 |
可选配件 / Optional Accessories
表面处理/Finishes
Stainless
不锈钢 201/304
steel 201/304
02
镀镍
Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
Two hole base H=0／H=2
两孔底座
可选底座螺丝/ Base screw
可选装饰盖/Decorative cover
ø5x11mm 塑料双桥 Plastic double bridge
T9 90°二段力小角度阻尼铰链(快装)
TECHNICAL SPECIFICATION产品描述
· 阻尼铰链
• 适用于开启角度90°厚度16-22mmmm的门板
• 材质：上海宝钢
• 表面处理：镀镍
• 拉出式小角度缓冲
• EN15570标准，开合寿命长，稳定性高
· 快装式
•盖位调节：总行程8mm
·门缝调节：总行程8mm
• Damp hinge
• Suitable for door panels with an opening angle of 90° and a thickness of 16-22mm
• Material: Baosteel
· Surface Treatment: Nickel plated
• Integrated silent buffer system
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 8mm
• Door seam adjustment: total travel 8mm
CUP INSTALIATION 铰杯安装
4x9mm 平咀螺丝
Model: T9 90° Two-stage force small-angle damping hinge (Quick release)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
表面处理/Finishes
不锈钢 201/304
steel 201/304
02
镀镍
Nickeling
可选底座配置/Hinge base
欧式移位脚
European style shifting feet H=0/H=2
Two hole base H=0／H=2
移位底座 Shifting base H=0/H=2
可选底座螺丝/ Base screw
ø4x16mm 木牙螺丝 Wood screw
可选装饰盖/Decorative cover
T9 135°二段力小角度阻尼铰链(涡轮移位快装)
TECHNICAL SPECIFICATION产品描述
• 阻尼铰链
•适用于开启角度135°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
·移位快装式
•盖位调节：总行程7mm
门缝调节：总行程3.5mm
•上下调节: 总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 135° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
• Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
Model: T9 135° Two stage force small angle damping hinge (Turbine 3D Quick release)
OVERLAY TABLE 盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置/Hinge base | |||||||||||
| 欧式移位脚 European style shifting feet |  | 移位底座 Shifting base |  | 四孔底座 Four hole base |  | ||||||
| H=0/H=2 两孔底座 Two hole base | H=0/H=2 欧式二孔底座 | H=0/H=2 双桥二孔底座 Double bridge | |||||||||
| H=0/H=2 |  | European style two hole base H=0/H=2 |  | two hole base H=2 |  | ||||||
| 可选底座螺丝/ Base screw | ø7.7x4.7×15 mm | ø8.8 x6.33x17.6 | 可选装饰盖/Decorative cover | ||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | ø4x9mm 平咀螺丝 Flat headed screw |  ø10x12mm | 双桥螺丝 Double bridge screw |  | mm 欧式螺丝 European style screw ø5x11mm |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt | 塑料胶栓  Plastic rubber bolt |  |  | 铰杯装饰盖 Hinge cup  | |||||||
T9 135°二段力小角度阻尼铰链(移位快装)
TECHNICAL SPECIFICATION产品描述
·阻尼铰链
•适用于开启角度135°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
·拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
·快装式
•盖位调节：总行程7mm
•门缝调节：总行程3.5mm
•上下调节:总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 135° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• Quick release
• Cover adjustment: total stroke 7mm
•Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
| 表面处理/Finishes | |||||||||||
| 01 不锈钢 201/304 Stainless steel 201/304 | 02 镀镍 Nickeling |  | 03 钛金 Titanium gold | 04 黑镍 Black Nickel |  | ||||||
| 可选底座配置 /Hinge base | |||||||||||
| 欧式移位脚 European style shifting feet |  | 移位底座 Shifting base |  | 四孔底座 Four hole base |  | ||||||
| H=0/H=2 两孔底座 Two hole base | H=0/H=2 欧式二孔底座 European style | H=0/H=2 双桥二孔底座 | |||||||||
| H=0／H=2 |  | two hole base H=0/H=2 |  | Double bridge two hole base H=2 |  | ||||||
| ø8.8 | 可选装饰盖/Decorative cover | ||||||||||
| 可选底座螺丝/ Base screw | |||||||||||
| ø4x16mm 木牙螺丝 Wood screw |  | ø4x9mm 平咀螺丝 Flat headed screw |  | ø7.7x4.7×15 mm 双桥螺丝 Double bridge screw |  | x6.33x17.6 mm 欧式螺丝 European style screw |  | 铰臂装饰盖 Hinge arm |  | ||
| ø8x12mm 塑料胶栓 Plastic rubber bolt |  | ø10x12mm 塑料胶栓 Plastic rubber bolt |  | ø5x11mm 塑料双桥 Plastic double bridge | 铰杯装饰盖 Hinge cup |  | |||||
Model: T9 135° Two stage force small angle damping hinge (Quick release)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
可选配件 / Optional Accessories
T9 135°二段力小角度阻尼铰链(固装)
TECHNICAL SPECIFICATION产品描述
•阻尼铰链
•适用于开启角度135°厚度16-22mm的门板
• 材质：上海宝钢
• 表面处理：镀镍
•拉出式小角度缓冲
·EN15570标准，开合寿命长，稳定性高
• 固装式
•盖位调节：总行程7mm
·门缝调节：总行程3.5mm
•上下调节:总行程3.5mm
• Damp hinge
• Suitable for door panels with an opening angle of 135° and a thickness of 16-22mm
• Material: Baosteel
• Surface Treatment: Nickel plated
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
· Fixed
• Cover adjustment: total stroke 7mm
•Door seam adjustment: total travel 3.5mm
• Up and down adjustment: total stroke 3.5mm
CUP INSTALIATION 铰杯安装
| 拧入式 Screw on | 快装兜 Expanding | 按入式Knock-in | |||
| 木螺丝 Wood screws | S | 快装胶粒 / 8mm expansive dowel | E08 | M8 胶粒 / 8mm dowel | D08 |
| 欧洲螺丝 Euro screws | L07 | 快装胶粒 / 10mm expansive dowel | E10 | M10 胶粒 / 10mm dowel | D10 |
Depth Adjustment  深度调整 | 1Overlay Adjustment 水平调整 | 一Height Adjustment 高度调整 |
| 调整后方螺丝以调节柜门间隙。总调节量为：3.5mmRotate depth screw to adjust door gap.Adjust range: 3.5mm | 旋转调节丝以增加或减少门板覆盖量。总调节量为：7mmRotate lateral screw to increase or decrease dooroverlay. Adjust range : 7mm | 通过安装在侧板上的底座进行调节。总调节量为：3.5mmAdjust the mounting plate on panel to adjustthe door's height.Adjust range : 3.5mm |
| 建议：调节参数为产品设计参数，柜体实际尺寸和钻孔及安装方式可能对参数产生影响。Notice: The reference adjustment range is the product design range,the actual size of the cabinet and the drilling method may have a certain impact on the parameters. | ||
Model: T9 135° Two stage force small angle damping hinge (fixed)
OVERLAY TABLE盖位计算表
Full Overlay 全盖门
HINGE ADJUSTMENT 铰链的调节
可选配件 / Optional Accessories
可选底座螺丝/ Base screw
Wood screw
38x12mm
塑料胶栓
Flat headed screw
ø10x12mm 塑料胶栓 Plastic rubber bolt
可选装饰盖/Decorative cover
铰杯装饰盖 Hinge cup
T9-二段力小角度阻尼铝框铰链(移位快装)
TECHNICALSPECIFICATION产品描述
•阻尼铰链
•适用于开启角度105°厚度16-22mm的门板
• 材质：钢，黑金刚
•拉出式小角度缓冲
•EN15570标准，开合寿命长，稳定性高
·移位快装式
·盖位调节：总行程7mm
·门缝调节：总行程6mm
•上下调节：总行程6mm
• Damped hinges
• Suitable for door panels with an opening angle of 105°
and a thickness of 16-22mm
•Material: Steel, black diamond
• Pull out small angle damping
• EN15570 standard, long opening and closing life, high stability
• 3D Quick release
• Cover adjustment: total stroke 7mm
• Door seam adjustment: total travel 6mm
• Up and down adjustment: total stroke 6mm
DRILLING FOR CUP 铰杯钻孔
CUP INSTALIATION 铰杯安装
