可换刀片铣削工具设计规则 - 电子书在线预览、各类电子书在线制作-云展网平台

SNE(M)U

Negative-type Eight Edged Face Milling Insert

Order No.	Dimensions (mm)					Coated Cemented Carbide							Cemented Cermet Carbide
Order No.	LE	IC S		BS D1	KRINS	RE	GA4225	GPM20 GA325 GAA4230	GPP425	GM135 GP15	G140 GK4125	GK15 GS4130	GH4115 G25	GPTM
	SNEU1206ANEN-GL	9.1 12.7	6.35	1.6	5.9	45°	0.8



	SNEU1206ANEN-GM	9.1 12.7	6.35	1.6	5.9	45° 45°	0.8
	SNMU1206ANEN-GM	9.1 12.7	6.35	1.6	5.9		0.8

	SNEU1206ANSN-GH	9.1 12.7	6.35	1.6	5.9	45°	0.8
	SNMU1206ANSN-GH	9.1 12.7	6.35	1.6	5.9	45°	0.8


	SNEU1206ANFN-NL	9.1	12.76.35		1.6 5.9	45°	0.8



	SNEU1206ANEN-GW	9	12.76.35	5.1	5.9	45°	0.8



	SNEU1206ENEN-GM	9.9 12.7		6.35	1.2	5.9	75°	0.8
	SNMU1206ENEN-GM	9.9 12.7		6.35	1.2	5.9	75°	0.8



	SNMU1206ZNEN-GL	10.7 12.7 6.35			1.1	5.9	88°	0.8		O				O

●Stock OAvailable Upon Order

Planar Milling

SNE(M)U

Negative-Type Eight Edged Face Milling Insert

Order No.

Dimensions (mm)

Coated Cemented Carbide

CementedCarbide

Cermet

KRINS

GA425

GA4230

GA325

GP20

GP425

GP15GMM

135

G140

GKk425

GK115

GS130

GH4115

GN925

GPTM

SNEU1206ZNEN-GM

10.712.76.351.15.9 88° 0.8

SNMU1206ZNEN-GM

10.7

12.7

6.35

1.1

5.9

88°

0.8

●

SNMU1206ZNEN-GH

10.712.76.35

1.1

5.988°

0.8

SNEU1206ZNEN-GW

10.1

12.76.35

5.988°

0.6

SNEU120612-GM

10.3

12.7

6.35

5.9

1.2

·····

SNMU120612-GM

10.3

12.7

6.35

一

5.9

1.2

●

SNMU120616-GM

9.5

12.7

6.35

5.9

1.6

SNMU120620-GM

8.7

12.7

6.35

5.9

2.0

OStock OAvailable Upon Order

Note:

★1. The SNE(M)U1206AN\*N insert is paired with the MFB145/245 series tools.

2. The SNE(M)U1206ENEN insert is paired with the MFB275 series tools.

3. The SNE(M)U1206ZNEN insert is paired with the MFB288 series tools.

★ 4. The SNEU120612-GM and SNMU120612/16/20-GM inserts are paired with the MFB145/245/275/288 series tools.

SNE(M)U Series Geometry

Light Cutting of GeneralMaterials	Medium Cutting ofGeneral Materials	Heavy Cutting of GeneralMaterials	Aluminum Cutting	Wiper

GL	GM	GH	NL	GW

Large rake angle andnarrow edge widthdesign, most suitable forlight-load machining with hlow cutting force and lowfeed rate.	Large rake angle design,High-strength cuttingenabling light and edge, excellentsmooth cutting, and performance inigh-stability machining interrupted cut andcan be achieved under roughing with scalemost working conditions. removal.		Large rake angle, sharpedge, light cutting,polished surface, goodchip removal.	Large-arc wiper,improving the highquality surface.

Planar Milling

MFB145 Mandrel-type (with Shim)

Sparse-tooth Type
Stock OAvailable Upon Order

Order No.	Diameter		Dimensions (mm)						MaximumCuttingDepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	MaximumCuttingDepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB145-050R03A22-SN12 50		3	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N √		√	Fig1	0.41	●
MFB145-063R04A22-SN12	63	4	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	√	√	Fig1	0.60	●
MFB145-080R05A27-SN12	80	5	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	√	√	Fig1	1.11	●
MFB145-080L05A27-SN12	80	5	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	√	√	Fig1	1.11	●
MFB145-100R06B32-SN12	100	6	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	√	X	Fig2	1.51	●
MFB145-125R07B40-SN12	125	7	1251	38.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	×	Fig2	2.99	●
MFB145-160R08C40-SN12	160	8	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	×	Fig3	4.39	●
MFB145-200R10C60-SN12	200	10	2002	13.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	×	Fig3	6.37	●
MFB145-250R12C60-SN12	250	12	250	263.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	×	Fig3	9.50	O
MFB145-315R15D60-SN12	315	15	3153	28.5	60	80	25.7	14	3	SNE(M)U1206AN*N	√	X	Fig4	18.08	O

Dense-tooth Type

Order No.	Diameter		Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB145-050R04A22-SN12 50		4	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N √		√	Fig1	0.41	●
MFB145-050L04A22-SN12	50	4	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	√	√	Fig1	0.41	●
MFB145-063R05A22-SN12 63		5	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	√	√	Fig1	0.58	●
MFB145-080R07A27-SN12	80	7	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	√	√	Fig1	1.13	●
MFB145-080L08A27-SN12	80	8	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	√	√	Fig1	1.09	●
MFB145-100R08B32-SN12	100	8	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	√	X	Fig2	1.55	●
MFB145-125R10B40-SN12 125		10	125	138.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	X	Fig2	3.02	●
MFB145-160R12C40-SN12 160		12	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	X	Fig3	4.41	●
MFB145-160L12C40-SN12 160		12	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	×	Fig3	4.31	●
MFB145-200R14C60-SN12	200	14	2002	13.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	6.30	●
MFB145-200L14C60-SN12 200		14	200	213.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	6.30	●
MFB145-250R16C60-SN12 250		16	2502	63.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	9.29	O
MFB145-315R20D60-SN12 315		20	315	328.5	60	80	25.7	14	3	SNE(M)U1206AN*N √		X	Fig4	18.18	O

Stock OAvailable Upon Order

Planar Milling

Mandrel-type (with Shim)

Ultra-dense-tooth Type

Order No.			Dimensions (mm)						MaximumCuttingDepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	Instock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	MaximumCuttingDepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	Instock
MFB145-050R05A22-SN12	50	5	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N √		√	Fig1	0.37	●
MFB145-063R06A22-SN12	63	6	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	√	√	Fig1	0.57	●
MFB145-080R08A27-SN12	80	8	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	√	√	Fig1	1.09	●
MFB145-100R10B32-SN12	100	10	100	113.5	32	50	14.4	8	3	SNE(M)U1206AN*N	√	X	Fig2	1.48	●
MFB145-125R12B40-SN12	125	12	1251	38.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	X	Fig2	2.93	●
MFB145-160R15C40-SN12	160	15	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	√	X	Fig3	4.31	●
MFB145-200R18C60-SN12	200	18	200	213.5	60	63	63 25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	6.25	●
MFB145-200L18C60-SN12	200	18	200	213.5	60	63	63 25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	6.25	●
MFB145-250R21C60-SN12	250	21	250 263.5		60	63	63 25.7	14	3	SNE(M)U1206AN*N	√	×	Fig3	9.39	O
MFB145-315R24D60-SN12	315	24	315	328.5	60	80	80 25.7	14	3	SNE(M)U1206AN*N	√	X	Fig4	18.19	O

Stock OAvailable Upon Order

MFB145

Planar Milling

Mandrel-tYpe (with Shim)- Uneven Teeth

Order No.			Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB145-050R03A22-SN12U 50		3	50	63.5	22	4010.4		6.3 3		SNE(M)U1206AN*N	√	√	Fig1	0.41	●
MFB145-063R04A22-SN12U	63	4	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	√	√	Fig1	0.60	●
MFB145-080R05A27-SN12U	80	5	80	93.5	27	50	12.47	.0	3	SNE(M)U1206AN*N	√	√	Fig1	1.12	●
MFB145-100R06B32-SN12U	100	6	1001	13.5	32	50	14.4	8.0	3	SNE(M)U1206AN*N	√	X	Fig2	1.51	●
MFB145-125R07B40-SN12U	125	7	1251	38.5	40	63	16.4	9.0 3		SNE(M)U1206AN*N	√	×	Fig2	2.99	●
MFB145-160R08C40-SN12U	160	8	1601	73.5	40	63	16.4	9.0	3	SNE(M)U1206AN*N	√	×	Fig3	4.39	●
MFB145-200R10C60-SN12U	200	10	200	213.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	×	Fig3	6.37	●
MFB145-250R12C60-SN12U	250	12	2502	63.5	60	63	25.7	14	3	SNE(M)U1206AN*N	√	X	Fig3	9.50	●
MFB145-315R15D60-SN12U 315
		15	315	328.5	60	63	25.7	14 3		SNE(M)U1206AN*N √		×
		15	315	328.5	60	63	25.7	14 3		SNE(M)U1206AN*N √		×	Fig4	18.48	●

●Stock OAvailable Upon Order

List of Tool Accessories

Parts Name		Shim	Screw forShim	ShimScrewWrench	Insert Screw	RecommendedTorque	Insert Screw Wrench
ShapeSuitable Insert							Insert Screw Wrench
SNE(M)U1206	OrderNo.	H0K30SSN12 S	SAM060075B	TH40LB	SI60M040158-07108B	4.0N·m	TT15PB TT15TB

MFB245

Mandrel-type (without Shim)

Sparse-tooth Type

Dense-tooth type

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter Teeth		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB245-050R03A22-SN12 50		3	50	63.5	22 401		0.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.43	●
MFB245-063R04A22-SN12	63	4	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.64	●
MFB245-080R05A27-SN12	80	5	80	93.5	27	50	50 12.4	7	3	SNE(M)U1206AN*N	X	√	Fig1	1.16	●
MFB245-080L05A27-SN12	80	5	80	93.5	27	50	50 12.4	7	3	SNE(M)U1206AN*N	X	√	Fig1	1.16	●
MFB245-100R06B32-SN12	100	6	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	×	×	Fig2	1.56	●
MFB245-100L06B32-SN12	100	6	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	X	X	Fig2	1.56	●
MFB245-125R07B40-SN12	125	7	125	138.5	40	63	63 16.4	9	3	SNE(M)U1206AN*N	X	×	Fig2	3.12	●
MFB245-160R08C40-SN12	160	8	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	X	X	Fig3	4.53	●
MFB245-200R10C60-SN12	200	10	200	213.5	60	63	63 25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	6.56	●
MFB245-250R12C60-SN12	250	12	2502	63.5	60	63	63 25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	9.68	O
MFB245-315R15D60-SN12	315	15	315	328.5	60 80		25.7	14	3	SNE(M)U1206AN*N	X ×		Fig4 18.65		O

Stock OAvailable Upon Order

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter Teeth		DC	DCX	DCON LF		KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB245-050R04A22-SN12 50		4	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.40	●
MFB245-050L04A22-SN12	50	4	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.40	●
MFB245-063R05A22-SN12	63	5	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.60	●
MFB245-063L05A22-SN12	63	5	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.60	●
MFB245-080R07A27-SN12	80	7	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	X	√	Fig1	1.10	●
MFB245-080L07A27-SN12	80	7	809	3.5	27	50	12.4	7	3	SNE(M)U1206AN*N	X	√	Fig1	1.10	●
MFB245-100R08B32-SN12	100	8	100	100 113.5	32	50	14.4	8	3	SNE(M)U1206AN*N	X	X	Fig2	1.50	●
MFB245-100L08B32-SN12	100	8	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	X	X	Fig2	1.50	●
MFB245-125R10B40-SN12	125	10	125	125 138.5	40	63	16.4	9	3	SNE(M)U1206AN*N	×	×	Fig2	2.99	●
MFB245-125L10B40-SN12	125	10	125	125138.5	40	63	16.4	9	3	SNE(M)U1206AN*N	X	X	Fig2	2.99	●
MFB245-160R12C40-SN12	160	12	160	160 173.5	40	63	16.4	9	3	SNE(M)U1206AN*N	X	X	Fig3	4.37	●
MFB245-160L12C40-SN12	160	12	160	160173.5	40	63	16.4	9	3	SNE(M)U1206AN*N	×	×	Fig3	4.37	●
MFB245-200R14C60-SN12	200	14	200	200 213.5	60	632	5.7	14	3	SNE(M)U1206AN*N	×	×	Fig3	6.36	●
MFB245-200L14C60-SN12	200	14	200	200213.5	60	63	25.7	14	3	SNE(M)U1206AN*N	×	X	Fig3	6.36	●
MFB245-250R16C60-SN12	250	16	250	250 263.5	60	632	5.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	9.39	O
MFB245-250L16C60-SN12	250	16	250	250263.5	60	63	25.7	14	3	SNE(M)U1206AN*N	×	X	Fig3	9.39	O
MFB245-315R20D60-SN12	315	20	315	315 328.5	60	80	80 25.7	14	3	SNE(M)U1206AN*N	×	X	Fig4	18.31	O
MFB245-315L20D60-SN12	315	20	315	315328.5	60	80	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig4	18.31	O

●Stock OAvailable Upon Order

Planar Milling

MFB245 Mandrel-type (Without Shim)

Ultra-dense-tooth Type
MFB245

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter Teeth		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB245-050R05A22-SN12	50	5	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.38	●
MFB245-063R06A22-SN12	63	6	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.59	●
MFB245-080R08A27-SN12	80	8	80	93.5	27	50	12.4	7	3	SNE(M)U1206AN*N	×	√	Fig1	1.08	●
MFB245-100R10B32-SN12	100	10	1001	13.5	32	50	14.4	8	3	SNE(M)U1206AN*N	X	X	Fig2	1.45	●
MFB245-125R12B40-SN12	125	12	125	138.5	40	63	16.4	9	3	SNE(M)U1206AN*N	×	X	Fig2	2.95	●
MFB245-160R15C40-SN12	160	15	1601	73.5	40	63	16.4	9	3	SNE(M)U1206AN*N	×	X	Fig3	4.29	●
MFB245-200R18C60-SN12	200	18	200	213.5	60	63	25.7	14	3	SNE(M)U1206AN*N	×	×	Fig3	6.32	●
MFB245-200R20C60-SN12	200	20	200	200213.5	60	63	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	6.30	●
MFB245-250R21C60-SN12	250	21	250	263.5	60	63	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	9.39	O
MFB245-315R24D60-SN12	315	24	3153	28.5	60	80	25.7	14	3	SNE(M)U1206AN*N	X	×	Fig4	18.28	O

Mandrel-type (Without Shim)-uneven Teeth

●StockAvailable Upon Order

Order No.				Dimensions (mm)					MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight In(KG)	Stock
Order No.	Diameter	leeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight In(KG)	Stock
MFB245-050R03A22-SN12U	50	3	50	63.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	×	√	Fig1	0.43	●
MFB245-063R04A22-SN12U	63	4	63	76.5	22	40	10.4	6.3	3	SNE(M)U1206AN*N	X	√	Fig1	0.64	●
MFB245-080R05A27-SN12U	80	5	80	93.5	27	50	12.4	7.0	3	SNE(M)U1206AN*N	X	√	Fig1	1.16	●
MFB245-100R06B32-SN12U	100	6	1001	13.5	32	50	14.4	8.0	3	SNE(M)U1206AN*N	X	×	Fig2	1.56	●
MFB245-125R07B40-SN12U	125	7	125	125 138.5	40	63	16.4	9.0	3	SNE(M)U1206AN*N	X	×	Fig2	3.12	●
MFB245-160R08C40-SN12U	160	8	1601	73.5	40	63	16.4	9.0	3	SNE(M)U1206AN*N	X	X	Fig3	4.53	●
MFB245-160R12C40-SN12U	160	12	160	173.5	40	63	16.4	9.0	3	SNE(M)U1206AN*N	×	X	Fig3	4.38
MFB245-200R10C60-SN12U	200	10	2002	13.5	60	63	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	6.56	●
MFB245-250R12C60-SN12U	250	12	250	263.5	60	63	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig3	9.68	●
MFB245-315R15D60-SN12U
	315	15	3153	28.5	60	80	25.7	14	3	SNE(M)U1206AN*N	X	X
	315	15	3153	28.5	60	80	25.7	14	3	SNE(M)U1206AN*N	X	X	Fig4	18.65	●

List of Tool Accessories

Parts NameShapeSuitable Insert		Insert Screw	RecommendedTorque	Insert Screw Wrench
Parts NameShapeSuitable Insert
SNE(M)U1206	Order No.	SI83M050140-07010IB	5.0N·m	TI20PB	TI20TB

Schematic Diagram of Wiper Installation

The SNEU1206ANEN-GW has a total of 4 wipers available. The R-side wiper can only be used on a right-handed insert cutter, and the L-side wiper can only be used on a left-handed insert cutter. When using, place the wiper R or L parallel to the workpiece surface.

Use the R-side wiper on the right-handed insert cutter.

Use the L-side wiper on the left-handed insert cutter.

Planar Milling

MFB275 Mandrel-type (Without Shim)

Order No.			Dimensions (mm)						Max.Cutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	leeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB275-050R04A22-SN12	50	4	50	55	22	40	10.4	6.3	5	SNE(M)U1206ENEN	×	√	Fig1	0.31	●
MFB275-063R05A22-SN12	63	5	63	68	22	40	10.4	6.3	5	SNE(M)U1206ENEN	X	√	Fig1	0.53	●
MFB275-063R06A22-SN12	63	6	63	68	22	40	10.4	6.3	5	SNE(M)U1206ENEN	×	√	Fig1	0.55	●
MFB275-080R07A27-SN12	80	7	80	85	27	50	12.4	7	5	SNE(M)U1206ENEN	X	√	Fig1	1.04	●
MFB275-100R08B32-SN12	100	8	100	105	32	50	14.4	8	5	SNE(M)U1206ENEN	X	X	Fig2	1.41	●
MFB275-125R10B40-SN12	125	10	125	130	40	63	16.4	9	5	SNE(M)U1206ENEN	X	X	Fig2	2.81	●
MFB275-160R12C40-SN12	160	12	160	165	40	63	16.4	9	5	SNE(M)U1206ENEN	×	×	Fig3	3.95	●
MFB275-200R14C60-SN12	200	14	200	205	60	63	25.7	14	5	SNE(M)U1206ENEN	X	X	Fig3	6.33	●
MFB275-250R16C60-SN12	250	16	250	255	60	63	25.7	14	5	SNE(M)U1206ENEN	×	×	Fig3	10.27	O
MFB275-315R20D60-SN12	315	20	315	320	60	80	25.7	14	5	SNE(M)U1206ENEN	×	×	Fig4	18.97	O

●StockAvailable Upon Order

List of Tool Accessories

Parts NameShapeSuitable Insert		Insert Screw	RecommendedTorque	Insert Screw Wrench
Parts NameShapeSuitable Insert
SNE(M)U1206	Order No.	SI83M050140-07010IB	5.0N·m	TI20PB	TI20TB

StockAvailable Upon Order

Order No.			Dimensions (mm)						MaximumCutting	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Dlaméter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	Shim	InternalCooling	Diagram	Weight(KG)	InStock
MFB288-050R04A22-SN12	50	4	50	51	22	40	10.4	6.3	7	SNE(M)U1206ZNEN	×	√	Fig1	0.30	●
MFB288-063R05A22-SN12	63	5	63	64	22	40	10.4	6.3	7	SNE(M)U1206ZNEN	×	√	Fig1	0.41	●
MFB288-063L05A22-SN12	63	5	63	64	22	40	10.4	6.3	7	SNE(M)U1206ZNEN	X	√	Fig1	0.50	●
MFB288-063R06A22-SN12	63	6	63	64	22	40	10.4	6.3	7	SNE(M)U1206ZNEN	X	√	Fig1	0.49	●
MFB288-080R05A27-SN12	80	5	80	81	27	50	12.4	7	7	SNE(M)U1206ZNEN	X	√	Fig1	0.99	●
MFB288-080R07A27-SN12	80	7	80	81	27	50	12.4	7	7	SNE(M)U1206ZNEN	×	√	Fig1	0.92	●
MFB288-080L07A27-SN12	80	7	80	81	27	50	12.4	7	7	SNE(M)U1206ZNEN	×	√	Fig1	0.92	●
MFB288-100R08B32-SN12	100	8	1001	01	32	50	14.4	8	7	SNE(M)U1206ZNEN	X	X	Fig2	1.29	●
MFB288-125R10B40-SN12	125	10	125	126	40	63	16.4	9	7	SNE(M)U1206ZNEN	×	×	Fig2	2.88	●
MFB288-160R12C40-SN12	160	12	1601	61	40	63	16.4	9	7	SNE(M)U1206ZNEN	X	X	Fig3	3.86	●
MFB288-200R14C60-SN12	200	14	200	201	60	63	25.7	14	7	SNE(M)U1206ZNEN	X	X	Fig3	6.00	●
MFB288-250R16C60-SN12	250	16	2502	51	60	63	25.7	14	7	SNE(M)U1206ZNEN	X	X	Fig3	9.64	O
MFB288-315R20D60-SN12	315	20	315	316	60	80	25.7	14	7	SNE(M)U1206ZNEN	×	×	Fig4	16.96	O

MFB288

Cylindrical Straight Shank Type (Without Shim)

Order No.

Diameter Teeth

Dimensions (mm)

Maximum Cutting

Matched Insert

Internal Shim

Weight

In Stock

DCX

DCON

Depth APMX

Cooling

Diagram

(KG)

MFB288-040R03P32-SN12

110

SNE(M)U1206ZNEN

√

Fig5

0.67

StockAvailable Upon Order

List of Tool Accessories

Parts Name		Insert Screw	RecommendedTorque	Insert Screw Wrench
ShapeSuitable Insert
SNE(M)U1206	Order No.	SI83M050140-07010IB	5.0N·m	TI20PB	TI20TB

Schematic Diagram of Wiper Installation

The SNEU1206ZNEN-GW has a total of 4 wipers available. The R-side wiper can only be used on a right-handed insert cutter, and the L-side wiper can only be used on a left-handed insert cutter. When using, place the wiper R or L parallel to the workpiece surface.

Use the L-side wiper on the left-handed insert cutter.

Recommended Cutting Data

Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting DepthAp(mm)	Cutting SpeedVc(m/min)	Feed/edge fz (mm)
							LightCutting (L)	MediumCutting (M)	HeavyCutting (H)
P	Soft Steel	≤HB180		SNE(M)U1206ANEN	1.5	250(210-290)	0.2(0.1-0.3)	0.25(0.15-0.35)	0.3(0.2-0.4)
			GPM7120GA4225GA4230	SNE(M)U1206ENEN	2.5
				SNE(M)U1206ZNEN	3.5
	CarbonSteel, AlloySteel	HB180-350	GPM7120GA4225GA4230GP2115	SNE(M)U1206ANEN	1.5		0.15(0.1-0.2)	0.25(0.15-0.35)	0.3(0.2-0.4)
				SNE(M)U1206ENEN	2.5	220(180-260)
				SNE(M)U1206ZNEN	3.5
	Pre-hardenedSteel	HRC35-45	GPM7120GA4230GA4225GP2115	SNE(M)U1206ANEN	1.5		0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.3)
				SNE(M)U1206ENEN	2.5	140(100-180)
				SNE(M)U1206ZNEN	3.5
M	StainlessSteel(Ferritic,martensitic)	≤HB270	GM2140GM4135GA4230	SNE(M)U1206ANEN	1.5	180(140-220)	0.15(0.1-0.2)	0.25(0.15-0.35)	0.3(0.2-0.4)
				SNE(M)U1206ENEN	2.5
				SNE(M)U1206ZNEN	3.5
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	SNE(M)U1206ANEN	1.5		0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.3)
				SNE(M)U1206ENEN	2.5	160(120-200)
				SNE(M)U1206ZNEN	3.5
K	Gray CastIron	≤HB280	GK2115GK4125	SNE(M)U1206ANEN	1.5		0.15(0.1-0.2)	0.2(0.1-0.3)	0.3(0.2-0.4)
				SNE(M)U1206ENEN	2.5	180(140-220)
				SNE(M)U1206ZNEN	3.5
	NodularCast Iron,CompactGraphiteIron	≤ HB350	GK4125GK2115	SNE(M)U1206ANEN	1.5		0.15(0.1-0.2)	0.2(0.1-0.3)	0.3(0.2-0.4)
				SNE(M)U1206ENEN	2.5	160(120-200)
				SNE(M)U1206ZNEN	3.5
N	AluminumProduct	HB60-210	GN9125	SNEU1206ANFN	1.5	≥300	0.15(0.1-0.2)	0.2(0.1-0.3)	一
S	Heat-resistantAlloys,TitaniumAlloys	HRC30-45	GS4130	SNE(M)U1206ANEN	1.5		0.15(0.1-0.2)	0.2(0.1-0.3)	一
				SNE(M)U1206ENEN	2.5	40(30-60)
				SNE(M)U1206ZNEN	3.5

Planar Milling

HNG(K)U

Negative-type Twelve Edged Face Milling Inserts

Order No.		Dimensions (mm)							Coated Cemented Carbide												CementedCarbide	Cermet
Order No.		LE	IC	S	BS	D1	KRINS	GARE	4225	G4230	GPMGA325	20	GP425	GP15	GM135	G140	GK125	GK15	GS130	GH4115	GN925	GPPTM
HNGU0604ANEN-GL		3.4 12 4.441.1 4.9 15° 1.0									●			●○		●	●	O
		HNGU0905ANEN-GL	4.6	15.88	5.52	1.35	5	15°	2.2				●		●	●	●	●	●	●


	HNGU060432-GL	3.4	12	4.44	--	4.9	--	3.2			●			OO		O	O	OO





	HNGU0604ANEN-GM	3.4 12		4.48	1.1	4.9	15°	1.0			●●			●	●●		●·
	HNKU0604ANEN-GM	3.4	12	4.48	1.1	4.9	15°	1.0			●
	HNGU0905ANEN-GM	4.6	15.88	5.56	1.35	5	15°	2.2			●●				·····
	HNKU0905ANEN-GM	4.6	15.88	5.56	1.35	5	15°	1.2			。				●
	HNGU1307ANEN-GM	7.3	22.25	7.48	1.65	7.95	15°	1.3			○●			O	O
		HNKU1307ANEN-GM	7.3	22.25	7.48	1.65	7.95	15°	1.3							O O
	HNGU130720-GM	10.52	2.25	7.48	--	7.95	--	2.0			○●			O O O
	HNKU130720-GM	10.52	2.25	7.48	--	7.95	--	2.0


	HNGU0604ANEN-GH	3.4 12		4.48	1.1	4.9	15°1.0				●
	HNKU0604ANEN-GH	3.4 12		4.48	1.1	4.9	15°	1.0			●				O
	HNGU0905ANEN-GH	4.615.88		5.56	1.35	5	15°	2.2			●
	HNKU0905ANEN-GH 4.615.88			5.56	1.35	5	15°	1.2			●
	HNGU1307ANEN-GH	7.322.257.48			1.65	7.95	15° 1.3				●
	HNKU1307ANEN-GH 7.322.25			7.48	1.65	7.95	15°	1.3

The HNGU\*\*\*\*ANFN-GW insert is only paired with the MFC145 series tools.
Stock OAvailable Upon Order

HNG(K)U

Negative-type Twelve Edged Face Milling Inserts

Order No.		Dimensions (mm)							Coated Cemented Carbide												CementedCarbide	Cermet
Order No.		LE	IC	S	BS	D1	KRINS	RE	GA4225	G4230GA	43325	GP20	GP4225	GP15	GM135	G140	GK125	GK15	GS4130	GH4115	G925	GPTM
	HNGU060432-GH	3.4 12 4.48			-- 4.9		--	3.2			●					OO
	HNKU060432-GH	3.4	12	4.48	--	4.9	--	3.2				●					O
	HNGU090543-GH	4.215.88 5.56			--	5	--	4.3								○○
	HNKU090543-GH	4.2	15.88	5.56	--	5	--	4.3				●					O
	HNGU130720-GH	10.5	22.25	7.48	--	7.95	--	2.0								OO
	HNKU130720-GH	10.52	2.25	7.48	--	7.95	--	2.0									O
	HNGU130735-GH	8.822.25	7.48			7.95	--	3.5			●					OO
	HNKU130735-GH	8.8	22.257.48		--	7.95	--	3.5			●					O

																							HNGU0905ANFN-GW	7.8 15.88 5.54	7.8	1.6

★The HNGU\*\*\*\*ANFN-GW insert is only paired with the MFC145 series tools.
Stock OAvailable Upon Order

HNG(K)U Series Geometry

Light Cutting of GeneralMaterials	Medium Cutting of GeneralMaterials	Heavy Cutting of GeneralMaterials	Wiper

GL	GM	GH	GW

Large rake angle design,most suitable for light-loadmachining with low cuttingforce and low feed rate.	Large rake angle design,enabling light and smoothcutting, and high-stabilitymachining can be achievedunder most workingconditions.	High-strength cutting edge,excellent performancein interrupted cut androughing.	Large-arc wiper, improvingthe high quality surface.

Planar milling

MFC115

Mandrel Type

●StockAvailable Upon Order
MFC115

Order No.	Diameter	Teeth	Dimensions (mm)						Max.Cutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthApMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MFC115-040R05A16-HN06	40	5	40	53	16	40	8.4	5.6	1.6	HNG(K)U0604	√	Fig1	0.30	●
MFC115-050R04A22-HN09	50	4	50	67.7	22	40	10.4	6.3	2.2	HNG(K)U0905	√	Fig1	0.40	●
MFC115-050R05A22-HN06	50	5	50	63	22	40	10.4	6.3	1.6	HNG(K)U0604	√	Fig1	0.40	●
MFC115-063R05A22-HN09	63	5	63	80.7	22	40	10.4	6.3	2.2	HNG(K)U0905	√	Fig1	0.65	●
MFC115-063R06A22-HN06	63	6	63	76	22	40	10.4	6.3	1.6	HNG(K)U0604	√	Fig1	0.63	●
MFC115-063R06A22-HN09	63	6	63	80.7	22	40	10.4	6.3	2.2	HNG(K)U0905	√	Fig1	0.63	●
MFC115-080R06A27-HN09	80	6	80	97.7	27	50	12.4	7	2.2	HNG(K)U0905	√	Fig1	1.33	●
MFC115-080R08A27-HN06	80	8	80	93	27	50	12.4	7	1.6	HNG(K)U0604	√	Fig1	1.34	●
MFC115-100R08B32-HN09	100	8	1001	17.7	32	50	14.4	8	2.2	HNG(K)U0905	×	Fig2	1.83	●
MFC115-125R09B40-HN09	125	9	1251	42.7	40	63	16.4	9	2.2	HNG(K)U0905	X	Fig2	3.39	●
MFC115-160R12C40-HN09	160	12	1601	77.7	40	63	16.4	9	2.2	HNG(K)U0905	X	Fig3	4.83	●

Cylindrical Straight Shank Type

StockAvailable Upon Order

Order No.

Diameter

Teeth

Dimensions (mm)

Max.Cutting

Matched Insert

InternalCooling

Diagram

Weight(KG)

InStock

DCX

DCON

DepthAPMX

MFC115-025R03P20-HN06 25 3

25 38.2 20 120 32 1.6 HNG(K)U0604 √ Fig4 0.32

●

MFC115-032R03P25-HN06

130

1.6

HNG(K)U0604

√

Fig4

0.54

●

Planar milling

MFC115

Replaceable Tool Bit

Order No.

Diameter

Teeth

Dimensions (mm)

MaximumCutting

MatchedInsert

InternalCooling

Diagram

Weight(KG)

InStock

DCX

DCON

DCSFMS

CRKS

DepthAPMX

MFC115-025R03M16-HN06 25 3 25 38.2 17 29 32

M16 1.6 HNG(K)U0604 √ Fig5 0.17

MFC115-032R03M16-HN06

M16

1.6 HNG(K)U0604 √

Fig5

0.26

●

●StockAvailable Upon Order

List Of Tool Accessories

Parts NameShapeSuitable Insert		Insert Screw	RecommendedTorque	Insert Screw Wrench
Parts NameShapeSuitable Insert
HNG(K)U0604	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB
HNG(K)U0905	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB

Planar milling

MFC145 Mandrel Type

Sparse-tooth Type

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	Instock
Order No.	Diameter Teeth		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	Instock
MFC145-040R04A16-HN06	40	4	40	48	16	40	8.4	5.6	3.2	HNG(K)U0604	√	Fig1	0.24	●
MFC145-050R04A22-HN06	50	4	50	58	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.30	●
MFC145-050R04A22-HN09	50	4	50	60.6	22	40	10.4	6.3	4.5	HNG(K)U0905	√	Fig1	0.28	●
MFC145-063R04A22-HN06	63	4	63	71	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.51	●
MFC145-063R05A22-HN09	63	5	63	73.6	22	40	10.4	6.3	4.5	HNG(K)U0905	√	Fig1	0.50	●
MFC145-080R04A27-HN13	80	4	80	95.4	27	50	12.4	7	8.0	HNG(K)U1307	√	Fig1	1.04	●
MFC145-080R05A27-HN06	80	5	80	88	27	50	12.4	7	3.2	HNG(K)U0604	√	Fig1	1.16	●
MFC145-080R05A27-HN09	80	5	80	90.6	27	50	12.4	7	4.5	HNG(K)U0905	√	Fig1	1.13	●
MFC145-100R05B32-HN13	100	5	100	115.4	32	50	14.4	8	8.0	HNG(K)U1307	×	Fig2	1.50	●
MFC145-100R06B32-HN06	100	6	100	108	32	50	14.4	8	3.2	HNG(K)U0604	X	Fig2	1.64	●
MFC145-100R06B32-HN09	100	6	100	110.6	32	50	14.4	8	4.5	HNG(K)U0905	X	Fig2	1.66	●
MFC145-125R06B40-HN13	125	6	125	140.4	40	63	16.4	9	8.0	HNG(K)U1307	X	Fig2	2.95	●
MFC145-125R08B40-HN06	125	8	125	133	40	63	16.4	9	3.2	HNG(K)U0604	×	Fig2	3.01	●
MFC145-125R08B40-HN09	125	8	125	135.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig2	3.10	●
MFC145-160R09C40-HN13	160	9	160	175.4	40	63	16.4	9	8.0	HNG(K)U1307	×	Fig3	4.16	●
MFC145-160R10C40-HN06	160	10	160	167.9	40	63	16.4	9	3.2	HNG(K)U0604	X	Fig3	4.72	●
MFC145-160R10C40-HN09	160	10	160	170.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig3	4.08	●
MFC145-200R12C60-HN13	200	12	200	215.4	60	63	25.7	14	8.0	HNG(K)U1307	X	Fig3	5.89	●
MFC145-200R16C60-HN09	200	16	200	210.6	60	63	25.7	14	4.5	HNG(K)U0905	X	Fig3	5.70	●
MFC145-250R12C60-HN13	250	12	250	265.4	60	63	25.7	14	8.0	HNG(K)U1307	×	Fig3	11.71	●
MFC145-250R20C60-HN09	250	20	250	260.6	60	63	25.7	14	4.5	HNG(K)U0905	×	Fig3	11.53	●
MFC145-250L20C60-HN09	250	20	250	260.6	60	63	25.7	14	4.5	HNG(K)U0905	X	Fig3	11.53	O
MFC145-315R14D60-HN13	315	14	315	330.4	60	80	25.7	14	8.0	HNG(K)U1307	X	Fig4	17.11	●
MFC145-315R24D60-HN09	315	24	315	325.6	60	80	25.7	14	4.5	HNG(K)U0905	×	Fig4	16.81	●
MFC145-315L24D60-HN09	315	24	315	325.6	60	80	25.7	14	4.5	HNG(K)U0905	X	Fig4	16.81	O

StockAvailable Upon Order

Planar milling

MFC145 Mandrel Type

Dense-tooth Type

Order No.	Diameter	Teeth	Dimensions (mm)						MaximumCutting DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	MaximumCutting DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MFC145-040R05A16-HN06	40	5	40	48	16	40	8.4	5.6	3.2	HNG(K)U0604	√	Fig1	0.23	●
MFC145-050R05A22-HN06	50	5	50	58	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.28	●
MFC145-050R05A22-HN09	50	5	50	60.6	22	40	10.4	6.3	4.5	HNG(K)U0905	√	Fig1	0.27	●
MFC145-050R06A22-HN06	50	6	50	58	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.30	●
MFC145-063R06A22-HN06	63	6	63	71	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.48	●
MFC145-063R06A22-HN09	63	6	63	73.6	22	40	10.4	6.3	4.5	HNG(K)U0905	√	Fig1	0.47	●
MFC145-063R07A22-HN09	63	7	63	73.6	22	40	10.4	6.3	4.5	HNG(K)U0905	√	Fig1	0.47	●
MFC145-063R08A22-HN06	63	8	63	71	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.49	●
MFC145-080R06A27-HN09	80	6	80	90.6	27	50	12.4	7	4.5	HNG(K)U0905	√	Fig1	1.10	●
MFC145-080R07A27-HN09	80	7	80	90.6	27	50	12.4	7	4.5	HNG(K)U0905	√	Fig1	1.06	●
MFC145-080R08A27-HN06	80	8	80	88	27	50	12.4	7	3.2	HNG(K)U0604	√	Fig1	1.12	●
MFC145-080R09A27-HN09	80	9	80	90.6	27	50	12.4	7	4.5	HNG(K)U0905	√	Fig1	1.05	●
MFC145-080R10A27-HN06	80	1	80	88	27	50	12.4	7	3.2	HNG(K)U0604	√	Fig1	1.11	●
MFC145-100R08B32-HN09	100	8	1001	10.6	32	50	14.4	8	4.5	HNG(K)U0905	×	Fig2	1.59	●
MFC145-100R09A32-HN06	100	9	100	108	32	50	14.4	8	3.2	HNG(K)U0604	√	Fig1	1.80	●
MFC145-100R09B32-HN06	100	9	100	108	32	50	14.4	8	3.2	HNG(K)U0604	X	Fig2	1.61	●
MFC145-100R10B32-HN09	100	10	1001	10.6	32	50	14.4	8	4.5	HNG(K)U0905	X	Fig2	1.58	●
MFC145-100R11B32-HN09	100	11	100	110.6	32	50	14.4	8	4.5	HNG(K)U0905	X	Fig2	1.56	●
MFC145-100R12A32-HN06	100	12	100	108	32	50	14.4	8	3.2	HNG(K)U0604	√	Fig1	1.80	●
MFC145-100R12B32-HN06	100	12	100	108	32	50	14.4	8	3.2	HNG(K)U0604	X	Fig2	1.61	●
MFC145-125R10B40-HN09	125	10	1251	35.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig2	3.06
MFC145-125R12B40-HN06	125	12	125	133	40	63	16.4	9	3.2	HNG(K)U0604	X	Fig2	3.01	●
MFC145-125R14B40-HN09	125	14	125	135.6	40	63	16.4	9	4.5	HNG(K)U0905	X	Fig2	3.01
MFC145-125R16B40-HN06	125	16	125	133	40	63	16.4	9	3.2	HNG(K)U0604	X	Fig2	3.05	●
MFC145-160R12C40-HN09	160	12	1601	70.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig3	4.20
MFC145-160R16C40-HN09	160	16	160	170.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig3	4.25	●
MFC145-200R10C60-HN13	200	10	200	215.4	60	63	25.7	14	8.0	HNG(K)U1307	X	Fig3	5.81
MFC145-250R14C60-HN13	250	14	250	265.4	60	63	25.7	14	8.0	HNG(K)U1307	×	Fig3	11.44	●
MFC145-315R18D60-HN13	315	18	315	330.4	60	80	25.7	14	8.0	HNG(K)U1307	×	Fig4	16.97	●

StockAvailable Upon Order

MFC145 Unequal Teeth

●StockAvailable Upon Order

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter Teeth		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MFC145-063R08A22-HN06U	63	8	63	71	22	40	10.4	6.3	3.2	HNG(K)U0604	√	Fig1	0.48	●
MFC145-080R07A27-HN09U	80	7	80	90.6	27	50	12.4	7	4.5	HNG(K)U0905	√	Fig1	1.12	●
MFC145-080R08A27-HN06U	80	8	80	88	27	50	12.4	7	3.2	HNG(K)U0604	√	Fig1	1.13	●
MFC145-100R08B32-HN09U	100	8	100	110.6	32	50	14.4	8	4.5	HNG(K)U0905	X	Fig2	1.59	●
MFC145-100R09B32-HN06U	100	9	100	108	32	50	14.4	8	3.2	HNG(K)U0604	X	Fig1	1.61	●
MFC145-125R10B40-HN06U	125	10	125	133	40	63	16.4	9	3.2	HNG(K)U0604	X	Fig2	2.98	●
MFC145-125R10B40-HN09U	125	10	125	135.6	40	63	16.4	9	4.5	HNG(K)U0905	×	Fig2	3.06	●
MFC145-160R10C40-HN09U	160	10	160	170.6	40	63	16.4	9	4.5	HNG(K)U0905	X	Fig3	4.08	●
MFC145-200R12C60-HN13U	200	12	200	215.4	60	63	25.7	14	8.0	HNG(K)U1307	×	Fig3	5.89	●
MFC145-200R16C60-HN09U	200	16	200	210.6	60	63	25.7	14	4.5	HNG(K)U0905	X	Fig3	5.70	●
MFC145-250R12C60-HN13U	250	12	250	265.4	60	63	25.7	14	8.0	HNG(K)U1307	X	Fig3	11.71	●
MFC145-250R20C60-HN09U	250	20	250	260.6	60	63	25.7	14	4.5	HNG(K)U0905	X	Fig3	11.53	●
MFC145-315R14D60-HN13U	315	14	315	330.4	60	80	25.7	14	HNG(K)U1307			×	Fig4	17.11

Planar Milling

MFC145

Cylindrical Straight Shank Type

Sparse-tooth Type

Order No.	Diameter Teeth		Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
Order No.	Diameter Teeth	Teeth	DC	DCX	DCON	LF	LU	DepthAPMX	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
MFC145-025R02P20-HN06	25	2	25	33	20	120	32	3.2	HNG(K)U0604	√	Fig5	0.30	●
MFC145-025R03P25-HN06L	25	3	25	33	20	200	32	3.2	HNG(K)U0604	√	Fig5	0.73	●
MFC145-032R03P25-HN06	32	3	32	40	25	130	40	3.2	HNG(K)U0604	√	Fig5	0.51	●
MFC145-040R03P25-HN09	40	3	40	50.7	25	107	50	4.5	HNG(K)U0905	√	Fig5	0.60	●
MFC145-025R03P20-HN06	25	3	25	33	20	120	32	3.2	HNG(K)U0604	√	Fig5	0.29	●
MFC145-032R04P25-HN06	32	4	32	40	25	130	40	3.2	HNG(K)U0604	√	Fig5	0.50	●
MFC145-040R04P25-HN09	40	4	40	50.7	25	107	50 4.5 HNG(K)U0905 √				Fig5 0.57		●

StockAvailable Upon Order
Side-clamping Type

Fig6

Order No.	Diameter Teeth		Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
Order No.	Diameter Teeth	Teeth	DC	DCX	DCON	LF	LU	DepthAPMX	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
MFC145-025R03W20-HN06	25	3	25	33	20	82	32	3.2	HNG(K)U0604	√	Fig6	0.21	●
MFC145-032R03W25-HN06	32	3	32	40	25	97	40	3.2	HNG(K)U0604	√	Fig6	0.41
MFC145-040R03W25-HN09	40	3	40	50.6	25	107	50	4.5	HNG(K)U0905	√	Fig6	0.59	●
MFC145-032R04W25-HN06	32	4	32	40	25	97	40	3.2	HNG(K)U0604	√	Fig6	0.39	●
MFC145-040R04W25-HN09	40	4	40	50.6	25	107	50 4.5		HNG(K)U0905	√	Fig6	0.57	●

StockAvailable Upon Order

Planar Milling

MFC145

Replaceable Tool Bit

●StockAvailable Upon Order

Order No.

Diameter

Teeth

Dimensions (mm)

MaximumCutting

Matched Insert

InternalCooling

Diagram

Weight(KG)

InStock

DCX

DCON

DCSFMS

CRKS

DepthAPMX

MFC145-025R03M16-HN06

M16

3.2

HNG(K)U0604 √

Fig7

0.15

●

MFC145-032R03M16-HN06

M16

3.2

HNG(K)U0604

√

Fig7

0.22

●

MFC145-032R04M16-HN06

40 17

M16

3.2 HNG(K)U0604

√

Fig7

0.19

●

List of Tool Accessories

Parts Name		Insert Screw	Recommended Torque	Insert Screw Wrench
ShapeSuitable Insert
HNG(K)U0604	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB
HNG(K)U0905	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB
HNG(K)U1307	Order No.	SR45M060160IK	8.0N·m		TI25TQ

Planar milling

MFC160 Mandrel Type

Sparse-tooth Type

●StockAvailable Upon Order

Order No.	Diameter	Teeth	Dimensions (mm)						MaximumCutting	IMatched Insert	nternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	IMatched Insert	nternalCooling	Diagram	Weight(KG)	InStock
MFC160-040R04A16-HN06	40	4	40	46.1	16	40	8.4	5.6	4.3	HNG(K)U0604	√	Fig1	0.23	●
MFC160-050R04A22-HN06	50	4	50	56.1	22	40	10.4	6.3	4.3	HNG(K)U0604	√	Fig1	0.29	●
MFC160-050R05A22-HN09	50	5	50	58	22	40	10.4	6.3	7.4	HNG(K)U0905	√	Fig1	0.26	●
MFC160-063R04A22-HN06	63	4	63	69.1	22	40	10.4	6.3	4.3	HNG(K)U0604	√	Fig1	0.50	●
MFC160-063R06A22-HN09	63	6	63	71	22	40	10.4	6.3	7.4	HNG(K)U0905	√	Fig1	0.46	●
MFC160-080R05A27-HN06	80	5	80	86.1	27	50	12.4	7	4.3	HNG(K)U0604	√	Fig1	1.07	●
MFC160-080R08A27-HN09	80	8	80	88	27	50	12.4	7	7.4	HNG(K)U0905	√	Fig1	1.05
MFC160-100R06B32-HN06	100	6	100	106.1	32	50	14.4	8	4.3	HNG(K)U0604	X	Fig2	1.59	●
MFC160-100R10B32-HN09	100	10	100	108	32	50	14.4	8	7.4	HNG(K)U0905	×	Fig2	1.54	●
MFC160-125R08B40-HN06	125	8	125	131.1	40	63	16.4	9	4.3	HNG(K)U0604	X	Fig2	3.02	●
MFC160-125R12B40-HN09	125	12	125	133	40	63	16.4	9	7.4	HNG(K)U0905	X	Fig2	3.02	●
MFC160-160R14C40-HN09	160	14	160	168	40	63	16.4	9	7.4	HNG(K)U0905	X	Fig3	4.40	●
MFC160-200R16C60-HN09	200	16	200	208	60	63	25.7	14	7.4	HNG(K)U0905	×	Fig3	6.00	●
MFC160-250R16C60-HN09	250	16	250	258	60	63	25.7	14	7.4	HNG(K)U0905	×	Fig3	12.38	●

Dense-tooth type

Order No.			Dimensions (mm)						MaximumCutting		InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diaméter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX		InternalCooling	Diagram	Weight(KG)	InStock
MFC160-040R05A16-HN06	40	5	40	46.1	16	40	8.4	5.6	4.3	HNG(K)U0604	√	Fig1	0.22	●
MFC160-050R05A22-HN06	50	5	50	56.1	22	40	10.4	6.3	4.3	HNG(K)U0604	√	Fig1	0.29	●
MFC160-063R06A22-HN06	63	6	63	69.1	22	40	10.4	6.3	4.3	HNG(K)U0604	√	Fig1	0.46	●
MFC160-080R08A27-HN06	80	8	80	86.1	27	50	12.4	7	4.3	HNG(K)U0604	√	Fig1	1.03	●
MFC160-100R09B32-HN06	100	9	100	106.1	32	50	14.4	8	4.3	HNG(K)U0604	×	Fig2	1.55	●
MFC160-125R12B40-HN06	125	12	125	131.1	40	63	16.4	9	4.3	HNG(K)U0604	X	Fig2	2.98	●

StockAvailable Upon Order

List of Tool Accessories

Parts Name		Insert Screw	RecommendedTorque	Insert Screw Wrench
ShapeSuitable Insert
HNG(K)U0604	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB
HNG(K)U0905	Order No.	SR30M040100K	3.5N·m	TT15PB	TT15TB

Schematic Diagram of Wiper Installation

The HNGU06/09\*-GW has a total of 6 wipers available. The R-side wiper can only be used on a right-handed insert cutter, and the L-side wiper can only be used on à left-handed insert cutter. When using, place the wiper R/W or L/W parallel to the workpiece surface.

Use the R-side wiper on the right-handed insert cutter.

Use the L-side wiper on the left-handed insert cutter.

Recommended Cutting Data

Machined Material		MaterialHardness	Grade	Specifications	Recommended CuttingDepth Ap (mm)				Feed/edge fz (mm)
				Specifications	Recommended CuttingDepth Ap (mm)			CuttingSpeed	LightCutting (L)	Medium Cutting (M)		Heavy Cutting (H)
					MFC115 M	FC145	MFC160	Vc(m/min)	MFC145	MFC115	MFC145/MFC160	MFC115	MFC145/MFC160
	Soft Steel	≤ HB180	GPM7120GA4325	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15))	0.8(0.5-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5) (	0.20.15-0.25)
				HNG(K)U09	0.8	1.6	3	250(210-290)	0.15(0.1-0.2)	1.2(0.8-1.5)	0.2(0.15-0.25)	1.5(1-2)	0.25(0.2-0.3)
				HNG(K)U13		3.2	一		一	一	0.2(0.15-0.25)	一	0.25(0.2-0.3)
	Carbon Steel,Alloy Steel	HB180-350		HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.8(0.5-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5)(	0.20.15-0.25)
			GPM7120GA4325GP2115	HNG(K)U09	0.8	1.6	3	220(180-260)	0.15(0.1-0.2)	1.2(0.8-1.5)	0.2(0.15-0.25)	1.5(1-2)	0.25(0.2-0.3)
			GPM7120GA4325GP2115	HNG(K)U13		3.2					0.2(0.15-0.25)		0.25(0.2-0.3)
	Pre-hardenedSteel	HRC35-45		HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.6(0.4-0.8)	0.12(0.06-0.18)	1(0.6-1.2)	0.15(0.1-0.2)
			GPM7120GA4325GP2115	HNG(K)U09	0.8	1.6	3	140(100-180)	0.1(0.05-0.15)	1(0.6-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5) (	0.20.15-0.25)
			GPM7120GA4325GP2115	HNG(K)U13		3.2	一		一	一	0.15(0.1-0.2)	一	0.2(0.15-0.25)
	StainlessSteel(Ferritic,Martensitic)	≤HB270	GM2140GM4135GPM7120	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.8(0.5-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5)(	0.20.15-0.25)
				HNG(K)U09	0.8	1.6	3	180(140-220)	0.15(0.1-0.2)	1.2(0.8-1.5)	0.2(0.15-0.25)	1.5(1-2)	0.25(0.2-0.3)
				HNG(K)U13		3.2					0.2(0.15-0.25)		0.25(0.2-0.3)
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.6(0.4-0.8)	0.12(0.06-0.18)	1(0.6-1.2)	0.15(0.1-0.2)
				HNG(K)U09	0.8	1.6	3	140(100-180)	0.1(0.05-0.15)	1(0.6-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5) (	0.20.15-0.25)
				HNG(K)U13	一	3.2	一		一	一	0.15(0.1-0.2)	一	0.2(0.15-0.25)
	Gray CastIron	≤HB280	GK2115GK4125	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.8(0.5-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5)(	0.20.15-0.25)
				HNG(K)U09	0.8	1.6	3	180(140-220)	0.15(0.1-0.2)	1.2(0.8-1.5)	0.2(0.15-0.25)	1.5(1-2)	0.25(0.2-0.3)
				HNG(K)U13		3.2	一		一		0.2(0.15-0.25)	一	0.25(0.2-0.3)
	Nodular CastIron,CompactGraphite iron	≤HB350	GK4125GK2115	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.8(0.5-1.2)	0.15(0.1-0.2)	1.2(0.8-1.5) (	0.20.15-0.25)
				HNG(K)U09	0.8	1.6	3	160(120-200)	0.15(0.1-0.2)	1.2(0.8-1.5)	0.2(0.15-0.25)	1.5(1-2)	0.25(0.2-0.3)
				HNG(K)U13	一	3.2	一		一	一	0.2(0.15-0.25)	一	0.25(0.2-0.3)
	Heat-resistingAlloy	HRC30-45	GS4130	HNG(K)U06	0.6	1	1.6		0.1(0.05-0.15)	0.4(0.3-0.7)	0.12(0.06-0.18)
				HNG(K)U09	0.8	1.6	3	40(30-60)	0.1(0.05-0.15)	0.5(0.3-0.8)	0.15(0.1-0.2)	一	一
				HNG(K)U13		3.2			一		0.15(0.1-0.2)	一	一

HNE(M)X

Negative-type Twelve Edged Face Milling Inserts

Order No.

Dimensions (mm)

Coated Cemented Carbide

CementedCarbide

Cermet

GAA4225

GA4230

GA335

GPM20

GP4225

GP15

GM135

G140

GK4125

GK15

GS4130

GH415

GN915

GPTM

HNEX090510-KF 8.2 16.2 5.56 1.0 O O

HNEX090520-KF

7.0

16.2

5.56

2.0

●

HNEX090520-KM

7.2

16.2

5.56

2.0

●●

HNMX090520-KM

7.2

16.2

5.56

2.0

●

HNEX090516-KR

7.8

16.2

5.56

1.6

HNEX090530-KR

6.2

16.2

5.56

3.0

●

HNMX090516-KR

7.8

16.2

5.56

1.6

★HNEX090502-WC

6.6

15.8755.56

0.2

Note: ★ 1, HNEX090502-WC insert only corresponds to the MFB160 series tools.
Stock OAvailable Upon Order

Wiper

HNE(M)X Series Geometry

Light Cutting of Cast Iron Materials

Medium Cutting of Cast Iron Materials

Heavy Cutting of Cast Iron Materials

Special geometry for light duty machining with a large rake angle, small land width, small slot width, and through-slot design.

Special geometry for medium duty machining with a fanshaped anti-chip surface design and a unique land width ratio.

Special geometry for heavy duty machining with a large slot width and a unique rake face design.

A special wiper insert is used in conjunction with an adjustable tool clamp to achieve high quality surface and stability.

Planar Milling

MFB160

Mandrel Type

●StockAvailable Upon Order

Order No.	Diameter Teeth		Dimensions (mm)						MaximumCutting	I	nternalCooling	ToolClamp	Diagram	Weight(KG)	InStock
Order No.	Diameter Teeth		DC	DCX	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	nternalCooling	ToolClamp	Diagram	Weight(KG)	InStock
MFB160-125R12B40-HN09 125 12/3			125	135	40	63	16.4	9	8	HNE(M)X0905 ×		√	Fig1	4.51	●
MFB160-125R15B40-HN09	125	15/3	125	135	40	63	16.4	9	8	HNE(M)X0905	×	√	Fig1	4.39	●
MFB160-160R20C40-HN09	160	20/4	160	170	40	63	16.4	9	8	HNE(M)X0905	X	√	Fig2	6.69	●
MFB160-200R25C60-HN09	200	25/5	200	210	60	63	25.7	14	8	HNE(M)X0905	X	√	Fig2	9.83	●
MFB160-250R30C60-HN09	250	30/6250		260	60	80	25.7	14	8	HNE(M)X0905	X	√	Fig2	17.43	O
MFB160-315R40D60-HN09	315	40/8	315	325	60	80	25.7	14	8	HNE(M)X0905	×	√	Fig3	24.37	O

List of tool accessories

Parts Name		AdjustmentWedge	ClampingWedge	Clampingdouble-ended Screw	Adjustmentdouble-ended Screw	Adjustable Tool Clamp	Wrench
ShapeSuitable Insert
HNE(M)X0905	Order No.	CWA02B	CWA01B	SDAM060200B	SDAM080245B	AMFB1601RAB	TH30LB	TH40LB

Planar Milling

Mandrel Type

Sparse-tooth Type
Stock OAvailable Upon Order

Order No.	Diameter		Dimensions (mm)						MaximumCutting		InternalCooling	Tool		Weight	InStock
Order No.	Diameter	Teeth	DC	DCX	DCON	LF	KWW	KDP	DepthAPMX		InternalCooling	Clamp	Diagram	(KG)	InStock
MFB260-063R05A22-HN09 63		5	63	72	22	40	10.4 6.3		8	HNE(M)X0905 ×		X	Fig1	0.62	●
MFB260-080R06A27-HN09	80	6	80	90	27	50	12.4	7	8	HNE(M)X0905	X	X	Fig1	1.31	●
MFB260-100R08B32-HN09	100	8	100	110	32	50	14.4	8	8	HNE(M)X0905	X	X	Fig2	1.92	●
MFB260-125R12B40-HN09	125	12	125	135	40	63	16.4	9	8	HNE(M)X0905	X	X	Fig2	3.60	●
MFB260-160R15C40-HN09	160	15	160	170	40	63	16.4	9	8	HNE(M)X0905	X	×	Fig3	5.31	●
MFB260-200R18C60-HN09	200	18	200	210	60	63	25.7	14	8	HNE(M)X0905	X	×	Fig3	7.53	●

Dense-tooth Type

Order No.	Diameter		Dimensions (mm)						MaximumCutting	Matched	Internal	Tool	Diagram	Weight(KG)	InStock
Order No.	Diameter		DC	DCX	DCX DCON	LF	KWW	KDP	DepthAPMX	Insert	Cooling	Clamp	Diagram	Weight(KG)	InStock
MFB260-080R08A27-HN09	80	8	80	90	27	50	12.4	7	8	HNE(M)X0905	×	×	Fig1	1.29	●
MFB260-080R10A27-HN09	80	10	80	90	27	50	12.4	7	8	HNE(M)X0905	×	X	Fig1	1.26	●
MFB260-100R10B32-HN09	100	10	1001	10	32	50	14.4	8	8	HNE(M)X0905	X	X	Fig2	1.90	●
MFB260-100R14B32-HN09	100	14	1001	10	32	50	14.4	8	8	HNE(M)X0905	X	X	Fig2	1.85	●
MFB260-125R15B40-HN09	125	15	125	135	40	63	16.4	9	8	HNE(M)X0905	×	X	Fig2	3.55	●
MFB260-125R18B40-HN09	125	18	125	135	40	63	16.4	9	8	HNE(M)X0905	×	×	Fig2	3.38	●
MFB260-160R20C40-HN09	160	20	160	170	40	63	16.4	9	8	HNE(M)X0905	×	×	Fig3	5.25	●
MFB260-200R25C60-HN09	200	25	200	210	60	63	25.7	14	8	HNE(M)X0905	×	×	Fig3	7.39	●
MFB260-250R30C60-HN09	250	30 250	260		60	80	25.7	14	8	HNE(M)X0905	×	×	Fig3	16.31	O
MFB260-315R40D60-HN09	315	40	315	325	60	80	25.7	14	8	HNE(M)X0905	X	X	Fig4	24.89	O
MFB260-315L40D60-HN09	315	40	315	325	60	80	25.7	14	8	HNE(M)X0905	X	X	Fig4	24.89	O

●Stock OAvailable Upon Order

List of Tool Accessories

Parts NameShapeSuitable Insert		Clamping Wedge	Clamping Double-ended Screw	Wrench
Parts NameShapeSuitable Insert
HNE(M)X0905	Order No.	CWA01B	SDAM060200B	TH30LB

Recommended Cutting Data

Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting depthAp(mm)	Cutting SpeedVc(m/min)	Feed/edge fz (mm)
Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting depthAp(mm)	Cutting SpeedVc(m/min)	Light Cutting(L)	MediumCutting (M)	Heavy Cutting(H)
	Gray Cast Iron	≤HB280	GK2115GK4125	HNE(M)X0905	4	280(180-400)	0.15(0.1-0.2)	0.2(0.1-0.3)	0.3(0.2-0.4)
	NodularCast Iron,CompactGraphite Iron	≤HB350	GK4125GK2115	HNE(M)X0905	4	230(160-350)	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.15-0.3)

Shoulder Milling

APM(G)T

Positive Double-edged Shoulder Milling Inserts

Order No.APMT1135PDER-PL		Dimensions (mm)						Coated Cemented Carbide												CementedCarbide	Cermet
		LE	W1	S	BS	D1	RE	GA425	GA30	GA325	GP20	GP425	GP15	GMM135	G140	GK125	GK15	GS130	GH4115	GN9125	GPTM
		9.76.163.5 1.92 2.8 0.8
		APMT1604PDER-PL	14.9	9.26	4.76	2	4.6	0.8	●	●	●								●


	APMT1135PDER-PM	9.7 6.16		3.51.92 2.8 0.8				●	●	●											●
	APMT113504R-PM	9.7	6.16	3.51.922.8			0.4		●	O
	APMT1604PDER-PM	14.9	9.26	4.76 2		4.60	.8	●	●	●		●			····						●
	APMT160416R-PM	14.9	9.26	4.76	2	4.6	1.6			O
	APMT113508-GM	9.7	6.16	3.51.92 2.8			0.8			O
	APMT160410-GM	14.9	9.26	4.76	2	4.6	1.0			O				●


	APMT1135PDER-PR	9.7	6.16	3.5 1.87		2.8
	APMT1135PDER-PR	9.7	6.16	3.5 1.87		2.8	0.8	●	●	●		●			●●
	APMT1604PDER-PR	14.9	9.26	4.762.2							●		●
	APMT1604PDER-PR	14.9	9.26	4.762.2		4.6	0.8	●	●		●		●


	APGT1135PDFR-AL	9.76.16		3.5 1.92 2.8			0.8
	APGT1604PDFR-AL	14.9	9.26	4.762.24.6			0.8
	APGT1604PDFR-AL	14.9	9.26	4.762.24.6			0.8

●Stock OAvailable Upon Order

APM(G)T Series Geometry

Mandrel Type

Shoulder Milling

Order No.	Diameter		Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MEA190-040R05A16-AP11	40	5	40	16	40	8.4	5.6	9	APM(G)T1135	X	Fig1	0.20	●
MEA190-050R04A22-AP16	50	4	50	22	40	10.4	6.3	14	APM(G)T1604	×	Fig1	0.33	●
MEA190-050R06A22-AP11	50	6	50	22	40	10.4	6.3	9	APM(G)T1135	×	Fig1	0.37	●
MEA190-063R05A22-AP16	63	5	63	22	50	10.4	6.3	14	APM(G)T1604	X	Fig1	0.61	●
MEA190-080R06A27-AP16	80	6	80	27	50	12.4	7	14	APM(G)T1604	×	Fig1	0.96	●
MEA190-100R07B32-AP16	100	7	100	32	63	14.4	8	14	APM(G)T1604	X	Fig2	2.13	●
MEA190-125R08B40-AP16	125	8	125	40	63	16.4	9	14	APM(G)T1604	X	Fig2	2.80	●
MEA190-160R10C40-AP16	160	10	160	40	63	16.4	9	14	APM(G)T1604	X	Fig3	3.94	●
MEA190-200R12C60-AP16	200	12	200	60	63	25.7	14	14	APM(G)T1604	×	Fig3	7.25	●
MEA190-250R14C60-AP16	250	14	250	60	63	25.7	14	14	APM(G)T1604	×	Fig3	10.66	O

●StockAvailable Upon Order

Shoulder Milling

MEA190

Cylindrical Straight Shank Type

Order No.	Diameter	Teeth	Dimensions (mm)				MaximumCutting	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
Order No.	Diameter	Teeth	DC	DCON	LF	LU	DepthAPMX	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
MEA190-016R02P16-AP11	16	2	16	16	120	40	9	APM(G)T1135	×	Fig4	0.17	●
MEA190-016R02P16-AP11L	16	2	16	16	170	50	9	APM(G)T1135	×	Fig4	0.24	●
MEA190-020R02P20-AP11	20	2	20	20	160	50	9	APM(G)T1135	X	Fig4	0.36	●
MEA190-020R03P20-AP11	20	3	20	20	160	50	9	APM(G)T1135	X	Fig4	0.36	●
MEA190-025R02P25-AP16	25	2	25	25	160	50	14	APM(G)T1604	X	Fig4	0.55	●
MEA190-025R03P25-AP11	25	3	25	25	160	50	9	APM(G)T1135	X	Fig4	0.57	●
MEA190-025R04P25-AP11	25	4	25	25	160	50	9	APM(G)T1135	X	Fig4	0.56	●
MEA190-032R03P32-AP16	32	3	32	32	160	50	14	APM(G)T1604	X	Fig4	0.90	●
MEA190-032R04P32-AP11
	32	4	32	32	160	80	9	APM(G)T1135	X	Fig4
	32	4	32	32	160	80	9	APM(G)T1135	X	Fig4	0.91

●Stock OAvailable Upon Order

List of Tool Accessories

Parts Name		Insert Screw	Recommended Torque	Insert Screw Wrench
ShapeSuitable Insert
APM(G)T1135	Order No.	SI60M025065-03509S	1.0N·m	TT07PQ	一
APM(G)T1604	Order No.	SI60M040089-05313S	3.5N·m	TT15PB	TT15TB

Recommended Cutting Data

Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting DepthAp(mm)	Cutting SpeedVc(m/min)	Feed/edge fz (mm)
Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting DepthAp(mm)	Cutting SpeedVc(m/min)	Light Cutting(L)	Medium Cutting(M)	Heavy Cutting(H)
	Soft steel	≤HB180	GA4325GA4225GA4230GP4225	APMT1135	2.7	250	0.1(0.05-0.15)	0.15(0.1-0.2)	0.20(0.1-0.25)
	Soft steel	≤HB180	GA4325GA4225GA4230GP4225	APMT1604	4.2	(210-290)	0.2(0.1-0.3)	0.25(0.15-0.35)	0.3(0.2-0.4)
	Carbon Steel,Alloy Steel	HB180-350	GA4325GP2115GA4225GA4230GP4225	APMT1135	2.7	220	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Carbon Steel,Alloy Steel	HB180-350	GA4325GP2115GA4225GA4230GP4225	APMT1604	4.2	(180-260)	0.2(0.1-0.3)	0.25(0.15-0.35)	0.3(0.2-0.4)
	Pre-hardenedSteel	HRC35-45	GA4325GP2115GA4230GP4225	APMT1135	2.7	140	0.08(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	Pre-hardenedSteel	HRC35-45	GA4325GP2115GA4230GP4225	APMT1604	4.2	(100-180)	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	StainlessSteel(Ferritic,Martensitic)	≤HB270	GM2140GM4135GA4230	APMT1135	2.7	180	0.12(0.1-0.2)	0.15(0.1-0.2)	0.2(0.1-0.3)
	StainlessSteel(Ferritic,Martensitic)	≤HB270	GM2140GM4135GA4230	APMT1604	4.2	(140-220)	0.15(0.1-0.2)	0.25(0.15-0.35)	0.3(0.2-0.4)
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	APMT1135	2.7	140	0.1(0.05-0.15)	0.12(0.1-0.2)	0.15(0.1-0.2)
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	APMT1604	4.2	(100-180)	0.12(0.1-0.2)	0.15(0.1-0.2)	0.2(0.1-0.3)
	Gray CastIron	≤HB280	GK2115GK4125	APMT1135	2.7	180	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Gray CastIron	≤HB280	GK2115GK4125	APMT1604	4.2	(140-220)	0.2(0.1-0.3)	0.25(0.1-0.4)	0.3(0.2-0.5)
	NodularCast Iron,CompactGraphite iron	≤HB350	GK4125GK2115	APMT1135	2.7	160	0.08(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	NodularCast Iron,CompactGraphite iron	≤HB350	GK4125GK2115	APMT1604	4.2	(120-200)	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	AluminumProducts	HB60-210	GN9125	APGT1135	2.7	≥300	0.08(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	AluminumProducts	HB60-210	GN9125	APGT1604	4.2		0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Heat-resistantAlloys,TitaniumAlloys	HRC30-45	GS4130	APMT1135	2.7	40(30-60)	0.08(0.05-0.15)	0.08(0.05-0.15)	0.1(0.05-0.15)
	Heat-resistantAlloys,TitaniumAlloys	HRC30-45	GS4130	APMT1604	4.2	40(30-60)	0.1(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)

APK(E)T

Positive Double-edged Shoulder Milling Inserts

Order No.APKT113504R-GL 10.5 7 3.5 2 3.2 0.4
																												GPTM

																			APKT113508R-GL	●	●	●	●	●	●	●	●
																			APKT160408R-GL

	APKT113504R-GM	10.5 7		3.5	2	3.2	0.4						●			··
	APKT113508R-GM	10.5	7	3.5	2	3.2	0.8	●	●		●	●	●	0	●	●	●
	APKT113516R-GM	10.5	7	3.5	2	3.2	1.6		●	O		O	O	O	O	O	O
	APKT113532R-GM	10.5	7	3.44	3.6	3.2	3.2
	APKT160404R-GM	15.2	9.4	5.2	2.57	4.2	0.4			O	O		O	O	O	O	O
	APKT160408R-GM	15.2	9.4	5.2	2.57	4.2	0.8	●	●		●	●			●	●
	APKT160412R-GM	15.2	9.4	5.2	2.57	4.2	1.2		●		●			0	●	O
	APKT160416R-GM	15.2	9.4	5.2	2.57	4.2	1.6
	APKT160432R-GM	15.2	9.4	5.22.57		4.2	3.2
	APKT113508R-GH	10.5	7	3.5	2	3.2	0.8			O					O	O
	APKT113516R-GH	10.5 7		3.5 2		3.2	1.6
	APKT160408R-GH	15.2	9.4	5.2	2.57	4.2	0.8			O					O	O
	APKT160416R-GH	15.29.4		5.22.57		4.2	1.6
	APET113504R-NL	10.5	7	3.8	1.92	3.2	0.4											●
	APET160408R-NL	15.2 9.44		4.92 2.64		4.2	0.8

Stock OAvailable Upon Order

APK(E)T Series Geometry

Light Cutting of GeneralMaterials	Medium Cutting of GeneralMaterials	Heavy Cutting of GeneralMaterials	Aluminum CuttingNL

GL	GM	GH

Light duty cutting with lowcutting resistance to achievebetter machining quality.	Under general workingconditions, to achieve high-stability machining.	The edge has better strength,making it suitable for roughing.	Thin sharp edge type, suitablefor aluminum alloy machining.

Shoulder Milling

Mandrel Type

Order No.	Diameter		Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter		DC	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MEB190-040R05A16-AP11	40	5	40	16	40	8.4	5.6	9	APK(E)T1135	√	Fig1	0.21	●
MEB190-050R04A22-AP16	50	4	50	22	40	10.4	6.3	14	APK(E)T1604	√	Fig1	0.30	●
MEB190-050R07A22-AP11	50	7	50	22	40	10.4	6.3	9	APK(E)T1135	√	Fig1	0.29	●
MEB190-063R05A22-AP16	63	5	63	22	40	10.4	6.3	14	APK(E)T1604	√	Fig1	0.41	●
MEB190-063R07A22-AP11	63	7	63	22	40	10.4	6.3	9	APK(E)T1135	X	Fig1	0.48	●
MEB190-080R07A27-AP16	80	7	80	27	50	12.4	7	14	APK(E)T1604	√	Fig1	1.00	●
MEB190-080R08A27-AP11	80	8	80	27	50	12.4	7	9	APK(E)T1135	√	Fig1	1.02	●
MEB190-100R08A32-AP16	100	8	100	32	50	14.4	8	14	APK(E)T1604	√	Fig1	1.70	●
MEB190-100R12B32-AP11	100	12	100	32	63	14.4	8	9	APK(E)T1135	√	Fig2	1.60	●
MEB190-125R06B40-AP16	125	6	125	40	63	16.4	9	14	APK(E)T1604	X	Fig2	2.79	●
MEB190-125R09B40-AP16	125	9	125	40	63	16.4	9	14	APK(E)T1604	X	Fig2	2.76	●
MEB190-125R11B40-AP11	125	11	125	40	63	16.4	9	9	APK(E)T1135	X	Fig2	2.47	●
MEB190-160R10C40-AP16	160	10	160	40	63	16.4	9	14	APK(E)T1604	X	Fig3	4.05	●
MEB190-200R12C60-AP16	200	12	200	60	63	25.7	13	14	APK(E)T1604	X	Fig3	5.97	●

Stock OAvailable Upon Order

Shoulder Milling

MEB190 Side-clamping Type

Order No.	Diameter	Teeth	Dimensions (mm)				MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCON	LF	LU	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MEB190-016R02W16-AP11	16	2	16	16	130	25	9	APKT1135	×	Fig4	0.18	●
MEB190-016R02W16-AP11L	16	2	16	16	200	50	9	APKT1135	X	Fig4	0.28	●
MEB190-020R02W20-AP11	20	2	20	20	130	25	9	APK(E)T1135	√	Fig4	0.27	●
MEB190-020R03W20-AP11	20	3	20	20	130	25	9	APK(E)T1135	√	Fig4	0.26	●
MEB190-020R03W20-AP11L	20	3	20	20	200	50	9	APK(E)T1135	√	Fig4	0.41	●
MEB190-025R02W25-AP16	25	2	25	25	130	45	14	APK(E)T1604	√	Fig4	0.41	●
MEB190-025R02W25-AP16L	25	2	25	25	200	83	14	APK(E)T1604	√	Fig4	0.65	●
MEB190-025R03W25-AP11	25	3	25	25	130	28	9	APK(E)T1135	√	Fig4	0.43	●
MEB190-025R03W25-AP11L	25	3	25	25	200	89	9	APK(E)T1135	√	Fig4	0.65	●
MEB190-025R04W25-AP11	25	4	25	25	130	28	9	APK(E)T1135	√	Fig4	0.43	●
MEB190-032R03W32-AP16	32	3	32	32	130	40	14	APK(E)T1604	√	Fig4	0.68	●
MEB190-032R03W32-AP16L	32	3	32	32	200	54	14	APK(E)T1604	√	Fig4	1.12	●
MEB190-032R04W32-AP11	32	4	32	32	130	30	9	APK(E)T1135	√	Fig4	0.72	●
MEB190-032R04W32-AP11L	32	4	32	32	200	80	9	APK(E)T1135	√	Fig4	1.13	●
MEB190-040R03W32-AP16	40	3	40	32	150 45 14			APK(E)T1604 √ Fig4 0.89				●

Stock OAvailable Upon Order
Replaceable Tool Bit

MEB190

Fig5

Order No.	Diameter	Teeth	Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG) In	Stock
Order No.	Diameter		DC	DCSFMS	DCON	LF	CRKS	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG) In	Stock
MEB190-016R02M08-AP11	16	2	16	14.5	8.5	26	M8	9	APK(E)T1135	X	Fig5	0.03	●
MEB190-020R03M10-AP11	20	3	20	17.8	10.5	31	M10	9	APK(E)T1135	√	Fig5	0.05	●
MEB190-025R02M12-AP16	25	2	25	23	12.5	35	M12	14	APK(E)T1604	√	Fig5	0.08	●
MEB190-025R03M12-AP11	25	3	25	23	12.5	35	M12	9	APK(E)T1135	√	Fig5	0.10	●
MEB190-025R04M12-AP11	25	4	25	23	12.5	35	M12	9	APK(E)T1135	√	Fig5	0.10	●
MEB190-032R03M16-AP16	32	3	32	28.5	17	43	M16	14	APK(E)T1604	√	Fig5	0.18	●
MEB190-032R04M16-AP11	32	4	32	28.5	17	43	M16	9	APK(E)T1135	√	Fig5	0.21	●
MEB190-032R05M16-AP11	32	5	32	28.5	17	43	M16	9	APK(E)T1135	√	Fig5	0.21	●
MEB190-035R05M16-AP11	35	5	35	28.5	17	43	M16	9	APK(E)T1135	√	Fig5	0.22	●

●Stock OAvailable Upon Order

Shoulder Milling

MHB190

Helical Milling Tool - Mandrel Type

Fig6

Order No.	Diameter	Teeth	Dimensions (mm)					Maximum Cutting	Matched Insert	Internal Cooling	Diagram	Weight (KG)	In Stock
Order No.	Diameter	Teeth	DC	DCON	LF	KWW	Depth KDP APMX	Maximum Cutting	Matched Insert	Internal Cooling	Diagram	Weight (KG)	In Stock
MHB190-050R03A22-AP16	50	3/9	50	22	70	10.4	6.3	43	APKT1604	√	Fig6	0.59
MHB190-050R04A22-AP11	50	4/16	50	22	70	10.4	6.3	39.9	APKT1135	X	Fig6	0.70
MHB190-063R04A27-AP16	63	4/16	63	27	85	12.4	6.3	57	APKT1604	√	Fig6	1.28
MHB190-063R05A27-AP11	63	5/20	63	27	70	12.4	6.3	39.9	APKT1135	√	Fig6	1.16
MHB190-080R05A32-AP16	80	5/20	80	32	85	14.4	7	57	APKT1604	√	Fig6	2.21

Stock OAvailable Upon Order

MHB190

Helical Milling Tool - Side Clamping Type

Fig7

Order No.

Diameter Teeth

Dimensions (mm)

Maximum Cutting Depth APMX

Matched Insert

Internal Cooling

Diagram

Weight (KG)

In Stock

DCON

MHB190-032R02W32-AP11

2/8

130

39.9

APKT1135

√

Fig7

0.68

MHB190-040R03W32-AP11

3/12

130

39.9

APKT1135

√

Fig7

0.84

Stock OAvailable Upon Order

List of Tool Accessories

Parts Name		Insert Screw	Recommended Torque	Insert Screw Wrench
ShapeSuitable Insert
APK(E)T1135	Order No.	SI60M030072-04210S	1.8N·m	TT09PQ	TT09TQ
APK(E)T1604	Order No.	SI60M035080-05314S	3.0N·m	TT15PB	TT15TB

Recommended Cutting Data

Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting DepthAp(mm)	CuttingSpeedVc(m/min)	Feed/edge fz (mm)
Machined Material		MaterialHardness	Grade	Specifications	RecommendedCutting DepthAp(mm)	CuttingSpeedVc(m/min)	LightCutting(L)	MediumCutting (M)	HeavyCutting(H)
	Soft Steel	≤HB180	GA4225GA4230	APKT1135	2.7	180	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Soft Steel	≤HB180	GA4225GA4230	APKT1604	4.2	(140-220)	0.2(0.1-0.3)	0.25(0.15-0.35)	0.3(0.2-0.4)
	CarbonSteel, AlloySteel	HB180-350	GA4225GA4230GP2115	APKT1135	2.7	150	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	CarbonSteel, AlloySteel	HB180-350	GA4225GA4230GP2115	APKT1604	4.2	(110-190)	0.2(0.1-0.3)	0.25(0.15-0.35)	0.3(0.2-0.4)
	Pre-hardenedSteel	HRC35-45	GA4230GA4225GP2115	APKT1135	2.7	130	0.08(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	Pre-hardenedSteel	HRC35-45	GA4230GA4225GP2115	APKT1604	4.2	(90-170)	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	StainlessSteel(Ferritic,Martensitic)	≤HB270	GM2140GM4135GA4230	APKT1135	2.7	160	0.12(0.1-0.2)	0.15(0.1-0.2)	0.2(0.1-0.3)
	StainlessSteel(Ferritic,Martensitic)	≤HB270	GM2140GM4135GA4230	APKT1604	4.2	(120-200)	0.15(0.1-0.2)	0.25(0.15-0.35)	0.3(0.2-0.4)
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	APKT1135	2.7	160	0.1(0.05-0.15)	0.12(0.1-0.2)	0.15(0.1-0.2)
	StainlessSteel(Austenitic,Duplex)	≤HB270	GM2140GM4135	APKT1604	4.2	(120-200)	0.12(0.1-0.2)	0.15(0.1-0.2)	0.2(0.1-0.3)
	Gray CastIron	≤HB280	GK2115GK4125	APKT1135	2.7	180	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Gray CastIron	≤HB280	GK2115GK4125	APKT1604	4.2	(150-220)	0.2(0.1-0.3)	0.25(0.1-0.4)	0.3(0.2-0.5)
	NodularCast Iron,CompactGraphiteIron	≤HB350	GK4125GK2115	APKT1135	2.7	120	0.1(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	NodularCast Iron,CompactGraphiteIron	≤HB350	GK4125GK2115	APKT1604	4.2	(100-180)	0.2(0.1-0.3)	0.15(0.1-0.2)	0.2(0.1-0.25)
	AluminumProducts	HB60-210	GN9125	APET1135	2.7	500	0.08(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)
	AluminumProducts	HB60-210	GN9125	APET1604	4.2	(200-900)	0.1(0.05-0.15)	0.15(0.1-0.2)	0.2(0.1-0.25)
	Heat-resistantAlloys,TitaniumAlloys	HRC30-45	GS4130	APKT1135	2.7	60	0.08(0.05-0.15)	0.08(0.05-0.15)	0.1(0.05-0.15)
	Heat-resistantAlloys,TitaniumAlloys	HRC30-45	GS4130	APKT1604	4.2	(50-100)	0.1(0.05-0.15)	0.1(0.05-0.15)	0.15(0.1-0.2)

Shoulder Milling

APEW

Positive Double-edged Shoulder Milling Inserts

Dimensions (mm)

Coated Cemented Carbide

CementedCarbide

Cermet

G4225

GA430

GA25

GP20

G425

GP15

GMM135

G140

Gk4125

GK15

GS4130

GH415

GN9125

GPTM

Stock OAvailable Upon Order

APEW Series Geometry

Cutting of hardness steel materials

High-precision ground surface, suitable for semi-finishing and finishing of various mould steel materials

Fig1

Shoulder Milling

MEJ190

Replaceable Tool Bit

Order No.	Diameter Teeth		Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
Order No.	Diameter Teeth		DC	DCSFMS	DCON	LF	CRKS	DepthAPMX	Matched Insert	InternalCooling	Diagram	WeightIn(KG)	Stock
MEJ190-017R02M08-AP10S	17	3	17	15.5	8.5	25	8	2.5	APEW1003	X	Fig1	0.03	●
MEJ190-021R02M10-AP10	21	2	21	18	10.5	30	10	2.5	APEW1003	X	Fig1	0.06
MEJ190-021R03M10-AP10	21	3	21	18	10.5	30	10	2.5	APEW1003	X	Fig1	0.06	●
MEJ190-025R03M12-AP10	25	3	25	23	12.5	35	12	2.5	APEW1003	X	Fig1	0.11	●
MEJ190-025R04M12-AP10	25	4	25	23	12.5	35	12	2.5	APEW1003	×	Fig1	0.11	●
MEJ190-026R03M12-AP10	26	3	26	23	12.5	35	12	2.5	APEW1003	X	Fig1	0.11	●

Stock OAvailable Upon Order

List of Tool Accessories

Parts Name		Insert Screw	Recommended Torque	Insert Screw Wrench
ShapeSuitable Insert
APEW1003(DC=17)	Order No.	SI60M025050-03509S	1.0N·m	TT07PQ
APEW1003(DC≥20)	Order No.	SI60M025065-03509S	1.0N·m	TT07PQ

Recommended Cutting Data

Machined Material		Material Hardness	Grade	Cutting Speed Vc(m/min)	Insert Specifications	Feed/edge fz (mm)
Quenched steel		HRC48-55	GH4115	80 (60-120)	10	Light Cutting (L) 0.15 (0.1-0.2)	Medium Cutting (M) 0.2	Heavy Cutting (H) 0.3

ADGT NEW

Positive Double-edged Shoulder Milling Inserts

Order No.	Dimensions (mm)						Coated Cemented Carbide
Order No.	LE	W1	S	BS	D1	RE	GA425	GA430	GA35	GP20	GP4225	GP15	GM135	G140	GM20	GK425	GK15	GS130	GSM130	GH4115
ADGT180650R-SM 16.811.26.4				ADGT10T302R-SM					9.9 6.9			3.9	1.7	3	0.2
				ADGT10T304R-SM	9.9	6.9	3.9	1.9	3	0.4									O			●
				ADGT10T308R-SM	9.9 6.9		3.9	2	3	0.8									O			●
				ADGT10T312R-SM	9.8	6.9	3.9	2.3	3	1.2												●
				ADGT10T316R-SM	9.8	6.9	3.9	2.6	3	1.6									O			●
				ADGT10T320R-SM	9.7	6.9	3.9	2.9	3	2												●
				ADGT10T330R-SM	9.6	6.9	3.9	3.9	3	3 O												●
				ADGT120402R-SM	12.3	8.2		1.7	3.95	0.2									O			●
				ADGT120404R-SM	12.3	8.2		1.9	3.95	0.4 O												●
				ADGT120408R-SM	12.3 8.2			2.3	3.95	0.8								O				●
				ADGT120412R-SM	12.3 8.2			2.3	3.95	1.2 O											●
				ADGT120416R-SM	12.3 8.2			2.7	3.95	1.6									O			●
				ADGT120420R-SM	12.3 8.2			2.9	3.95	2 O											●
				ADGT120430R-SM	12.1 8.2			3.9	3.95	3									O			●
				ADGT180602R-SM	17.2 11.2		6.4	1.74.97		0.2
				ADGT180604R-SM	17.2 11.2		6.4	1.9	4.97	0.4												●
				ADGT180608R-SM	17.2 11.2		6.4	2.34.970.8 O													●
				ADGT180612R-SM	17.2 11.2		6.4	2.74.97		1.2												●
				ADGT180616R-SM	17.1 11.2		6.4	3.24.971.6
				ADGT180620R-SM	17.1 11.2		6.4	3.64.97		2								O
				ADGT180630R-SM	16.9 11.2 6.4			5 4.97 3 O
				ADGT180640R-SM	16.9 11.2 6.4			5 4.97		4											●
				5.74.97 5 O

Stock OAvailable Upon Order

ADGT Series Geometry<br>Cutting with low cutting resistance to obtain better machining quality.

Shoulder Milling

Order No.	Diameter	Teeth	Dimensions (mm)					MaximumCutting	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
Order No.	Diameter	Teeth	DC	DCON	LF	KWW	KDP	DepthAPMX	Matched Insert	InternalCooling	Diagram	Weight(KG)	InStock
MET190-040R04A16-AD18	40	4	40	16	40	8.4	5.6	16	ADGT1806	X	Fig1	0.18	●
MET190-050R05A22-AD12	50	5	50	22	40	10.4	6.3	11	ADGT1204	√	Fig1	0.34	●
MET190-050R07A22-AD12	50	7	50	22	40	10.4	6.3	11	ADGT1204	√	Fig1	0.31	●
MET190-050R04A22-AD18	50	4	50	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.29	●
MET190-050R05A22-AD18	50	5	50	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.27	●
MET190-052R04A22-AD18	52	4	52	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.29	●
MET190-063R08A22-AD10	63	8	63	22	40	10.4	6.3	9	ADGT10T3	√	Fig1	0.53	●
MET190-063R06A22-AD12	63	6	63	22	40	10.4	6.3	11	ADGT1204	√	Fig1	0.51	●
MET190-063R08A22-AD12	63	8	63	22	40	10.4	6.3	11	ADGT1204	√	Fig1	0.48	●
MET190-063R05A22-AD18	63	5	63	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.49	●
MET190-063R06A22-AD18	63	6	63	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.46	●
MET190-066R05A22-AD18	66	5	66	22	40	10.4	6.3	16	ADGT1806	√	Fig1	0.54	●
MET190-080R07A27-AD12	80	7	80	27	50	12.4	7	11	ADGT1204	√	Fig1	1.11	●
MET190-080R10A27-AD12	80	10	80	27	50	12.4	7	11	ADGT1204	√	Fig1	1.07	●
MET190-080R06A27-AD18	80	6	80	27	50	12.4	7	16	ADGT1806	√	Fig1	1.09	●
MET190-080R08A27-AD18	80	8	80	27	50	12.4	7	16	ADGT1806	√	Fig1	1.04	●
MET190-100R08B32-AD12	100	8	100	32	50	14.4	8	11	ADGT1204	X	Fig2	1.47	●
MET190-100R12B32-AD12	100	12	100	32	50	14.4	8	11	ADGT1204	X	Fig2	1.43	●
MET190-100R07B32-AD18	100	7	100	32	50	14.4	8	16	ADGT1806	X	Fig2	1.46	●
MET190-100R09B32-AD18	100	9	100	32	50	14.4	8	16	ADGT1806	X	Fig2	1.41	●
MET190-125R08B40-AD18	125	8	125	40	63	16.4	9	16	ADGT1806	×	Fig2	2.96	●
MET190-125R11B40-AD18	125	11	125	40	63	16.4	9	16	ADGT1806	X	Fig2	2.88	●
MET190-160R09C40-AD18	160	9	160	40	63	16.4	9	16	ADGT1806	X	Fig3	4.41	●
MET190-160R12C40-AD18	160	12	160	40	63	16.4	9	16	ADGT1806	×	Fig3	4.31	●

StockAvailable Upon Order

Mandrel Type-unequal Teeth

Order No. D	iameter	Teeth	Dimensions (mm)					MaximumCutting	I	nternalCooling	x27;Diagram	Weight	In
Order No. D	iameter	Teeth	DC	DCON	LF	KWW	KDP	DepthAPMX		nternalCooling	x27;Diagram	(KG)	stock
MET190-125R08B40-AD18U	125	8	125	40	63	16.4	9	16	ADGT1806	X	Fig2	2.96	●
MET190-160R10C40-AD18U	160	10	160	40	63	16.4	9	16	ADGT1806	X	Fig3	4.37	●
MET190-200R10C60-AD18U	200	10	200	60	63	25.7	14	16	ADGT1806	X	Fig3	7.23	●
MET190-250R14C60-AD18U	250	14	250	60	63	25.7	14	16	ADGT1806	X	Fig3	10.65	O
MET190-315R18D60-AD18U	315	18	315	60	80	25.7	14	16	ADGT1806	X	Fig3	18.06	O

StockAvailable Upon Order

Shoulder Milling

MET190

Cylindrical Straight Shank Type

Order No.	Diameter	Teeth	Dimensions (mm)				MaximumCutting DepthAPMX	MatchedInsert	Internalcooling	Diagram	Weight(KG)	In Stock
Order No.	Diameter	Teeth	DC	DCON	LF	LU	MaximumCutting DepthAPMX	MatchedInsert	Internalcooling	Diagram	Weight(KG)	In Stock
MET190-016R02P16-AD10	16	2	16	16	100	30 9 ADGT10T3			√	Fig4	0.12	●
MET190-016R02P16-AD10L	16	2	16	16	170	50	9	ADGT10T3	√	Fig4	0.21	●
MET190-016R02P16N-AD10	16	2	16	16	100	-	9	ADGT10T3	√	Fig4	0.12	●
MET190-018R02P16-AD10	18	2	18	16	170	40	9	ADGT10T3	√	Fig4	0.22	●
MET190-020R02P20-AD10	20	2	20	20	100	30	9	ADGT10T3	√	Fig4	0.20	●
MET190-020R02P20-AD10L	20	2	20	20	150	40	9	ADGT10T3	√	Fig4	0.31	●
MET190-020R03P20-AD10S	20	3	20	20	80	25	9	ADGT10T3	√	Fig4	0.16	●
MET190-020R03P20-AD10	20	3	20	20	150	20	9	ADGT10T3	√	Fig4	0.31	●
MET190-020R03P20-AD10L	20	3	20	20	200	50	9	ADGT10T3	√	Fig4	0.41	●
MET190-020R02P20-AD12	20	2	20	20	100	40	11	ADGT1204	√	Fig4	0.19	●
MET190-020R02P20-AD12L	20	2	20	20	170	60	11	ADGT1204	√	Fig4	0.33	●
MET190-025R03P25-AD10	25	3	25	25	100	30	9	ADGT10T3	√	Fig4	0.31	●
MET190-025R03P25-AD10L	25	3	25	25	150	40	9 ADGT10T3		√	Fig4	0.48	●
MET190-025R04P25-AD10L	25	4	25	25	200	50	9	ADGT10T3	√	Fig4	0.64	●
MET190-025R02P25-AD12	25	2	25	25	100	40	11 ADGT1204		√	Fig4	0.30	●
MET190-025R02P25-AD12L	25	2	25	25	200	60	11	ADGT1204	√	Fig4	0.64	●
MET190-025R03P25-AD12	25	3	25	25	100	40	11 ADGT1204		√	Fig4	0.29	●
MET190-025R03P25-AD12L	25	3	25	25	200	60	11	ADGT1204	√	Fig4	0.62	●
MET190-032R04P32-AD10	32	4	32	32	100	30	9 ADGT10T3		√	Fig4	0.54	●
MET190-032R04P32-AD10L	32	4	32	32	150	40	9	ADGT10T3	√	Fig4	0.83	●
MET190-032R05P32-AD10L	32	5	32	32	200	50	9 ADGT10T3		√	Fig4	1.11	●
MET190-032R03P32-AD12	32	3	32	32	110	50	11	ADGT1204	√	Fig4	0.57	●
MET190-032R03P32-AD12L	32	3	32	32	210	80	11 ADGT1204		√	Fig4	1.14	●
MET190-032R04P32-AD12	32	4	32	32	110	50	11	ADGT1204	√	Fig4	0.56	●
MET190-032R04P32-AD12L	32	4	32	32	210	80	11 ADGT1204		√	Fig4	1.13	●
MET190-032R02P32-AD18	32	2	32	32	110	50	16	ADGT1806	√	Fig4	0.56	●

Stock OAvailable Upon Order

Shoulder Milling

MET190

Cylindrical Straight Shank Type

Continued

Order No.	Diameter	Teeth	Dimensions (mm)				MaximumCutting DepthAPMX	MatchedInsert	Internalcooling	Diagram	Weight(KG)	In Stock
Order No.	Diameter	Teeth	DC	DCON	LF	LU	MaximumCutting DepthAPMX	MatchedInsert	Internalcooling	Diagram	Weight(KG)	In Stock
MET190-032R02P32-AD18L 32		2	32 32		210	80	16	ADGT1806	√	Fig4	1.13	●
MET190-032R03P32-AD18	32	3	32	32	110	50	16	ADGT1806	√	Fig4	0.54	●
MET190-032R03P32-AD18L	32	3	32	32	210	80	16	ADGT1806	√	Fig4	1.10	●
MET190-035R03P32-AD12	35	3	35	32	160	-	11	ADGT1204	√	Fig4	0.91	●
MET190-035R03P32-AD12L	35	3	35	32	250	-	11	ADGT1204	√	Fig4	1.45	●
MET190-035R04P32-AD12	35	4	35	32	160	-	11	ADGT1204	√	Fig4	0.90	●
MET190-035R04P32-AD12L	35	4	35	32	250	-	11	ADGT1204	√	Fig4	1.43	●
MET190-040R03P32-AD18	40	3	40	32	160	-	16	ADGT1806	√	Fig4	0.96	●
MET190-040R03P32-AD18L	40	3	40	32	250	-	16 ADGT1806		√	Fig4	1.49	●
MET190-040R04P32-AD18	40	4	40	32	160	-	16	ADGT1806	√	Fig4	0.93	●
MET190-040R04P32-AD18L	40	4	40	32	250	-	16 ADGT1806		√	Fig4	1.46	●

StockAvailable Upon Order

Shoulder Milling

MET190

Replaceable Tool Bit

Order No.	Diameter	Teeth	Dimensions (mm)					MaximumCutting	IMatched Insert	nternalCooling	Diagram	Weight(KG)	Instock
Order No.	Diameter	Teeth	DC	DCSFMS	DCON	LF	CRKS	DepthAPMX		nternalCooling	Diagram	Weight(KG)	Instock
MET190-016R02M08-AD10	16	2	16	15	8.5	28	M08	9	ADGT10T3	X	Fig5	0.03	●
MET190-020R02M10-AD12	20	2	20	18	10.5	28	M10	11	ADGT1204	√	Fig5	0.04	●
MET190-025R03M12-AD12	25	3	25	23	12.5	35	M12	11	ADGT1204	√	Fig5	0.09	●
MET190-032R03M16-AD12	32	3	32	30	17	40	M16	11	ADGT1204	√	Fig5	0.19	●
MET190-032R04M16-AD12	32	4	32	30	17	40	M16	11	ADGT1204	√	Fig5	0.18	●
MET190-032R02M16-AD18	32	2	32	30	17	45	M16	16	ADGT1806	√	Fig5	0.21	●
MET190-032R03M16-AD18	32	3	32	30	17	45	M16	16	ADGT1806	√	Fig5	0.19	●
MET190-040R04M16-AD12	40	4	40	30	17	40	M16	11	ADGT1204	√	Fig5	0.25	●
MET190-040R04M20-AD12	40	4	40	37	21	45	M20	11	ADGT1204	√	Fig5	0.37	●
MET190-040R05M16-AD12	40	5	40	30	17	40	M16	11	ADGT1204	√	Fig5	0.24	●
MET190-040R05M20-AD12	40	5	40	37	21	45	M20	11	ADGT1204	√	Fig5	0.35	●
MET190-040R03M16-AD18	40	3	40	30	17	45	M16	16	ADGT1806	√	Fig5	0.26	●
MET190-040R03M20-AD18	40	3	40	37	21	45	M20	16	ADGT1806	√	Fig5	0.34
MET190-040R04M16-AD18	40	4	40	30	17	45	M16	16	ADGT1806	√	Fig5	0.23	●
MET190-040R04M20-AD18	40	4	40	37	21	45	M20	16	ADGT1806	√	Fig5	0.32	●

●StockAvailable Upon Order

SNE(M)U

SNE(M)U

Note:

SNE(M)U Series Geometry

Planar Milling

MFB245

Schematic Diagram of Wiper Installation

MFB288

List of Tool Accessories

Schematic Diagram of Wiper Installation

HNG(K)U

HNG(K)U

HNG(K)U Series Geometry

MFC115

List Of Tool Accessories

MFC145

Planar Milling

MFC145

List of Tool Accessories

Schematic Diagram of Wiper Installation

Recommended Cutting Data

HNE(M)X

MFB160

Recommended Cutting Data

APM(G)T

MEA190

List of Tool Accessories

Recommended Cutting Data

APK(E)T Series Geometry

Shoulder Milling

MHB190

MHB190

List of Tool Accessories

Recommended Cutting Data

APEW

List of Tool Accessories

Recommended Cutting Data

MET190

Shoulder Milling

MET190

快速跳转到指定页