该页无缩略图
ATF EXCHANGER变速油箱更换机
新油罐容积Oil tank capacity(NEW)
旧油罐容积Oil tank capacity(NEW)
适用 Applicable
不适用N/A
参数 Parameters
| 型号 Model | GD-608 |
| 电压 Voltage | AC220V 50/60Hz 1Ph |
| 电机功率 Motor power | 140W |
| 压力表量程 Pressure gauge range | 0~16Bar |
| 工作压力 Operating pressure | ≤6Bar |
| 出油管长度 Length of oil outlet hose | 2.5m |
| 回油管长度 Length of oil return hose | 2.5m |
| 排油管长度 Length of oil drain hose | 2.0m |
| 过滤器滤芯精度 Filter element precision | 5μm |
| 等量更换误差 Equivalent replacement error | ≤±0.05L |
| 最大换油速度 Max. speed of oil exchange | 3.0L /Min |
| 机器尺寸 Dimension of machine | 465mm*465mm*1360mm |
| 包装尺寸 Package dimension | 495mm*495mm*1390mm |
彩色触摸屏 Color Touch Screen
一键快速换油 Quick Oil Change with One Button
预存大量车型数据 Large Amount of Pre-Stored Model Data
新颖专利内外双层液罐设计Patented Double Wall TankDesign
为新液加温，保护汽车变速箱及其管路。 Protect transmissions and lines by warming up new fluids.
精确的刻度标识
Precise Scale Markings
人工模式下也可准确完成换油作业。 Oil changes can also be done accurately in manual mode.
专利独创深海传送技术
Exclusive Deeptrans Technology
换油量测量更精准。
More accurate oil change measurement.
两种新油补充方式
Two Types of New Oil Replenishment
机器配备两种新油补充方式，既可人工倒油，也可采用程序控制自动抽油，灵活选择，轻松补油。
The machine is equipped with two new oil replenishment methods. Both manual oil pouring and programmed control automatic oil pumping are available, offering flexible choices and easy oil replenishment.
人工倒油Manual
智能等量交换 Intelligent Equal Volume Oil Exchange
通过主板精细控制和精密电子秤测量，实现高换 油率，同时节省新油使用量。
新旧油置换量精确到±100ml。
High oil change rates and savings on new oil usage through fine control and precision
electronic scale measurement.
The amount of new and used oil replacement is accurate to ±100ml.
专利新旧油可视化设计 Patented Visualization Design
耐高温。耐压。耐冲击 High temperature resistance Pressure resistance Impact resistance
USB接口 USB Interface
配置USB接口，可用U盘对内置车型数据升级。 Configured with USB port, available to upgrade the data of built-in models with USB disk.
供应多种规格接头 Offer a Wide Range of Connectors
标配多种规格的变速箱管路连接适配接头，适用于大部分车型，且设计有近百种专用的异型接头供客户选购。
Comes with various connectors which match with various gearbox pipes so as to accommodate most of car. Moreover, there is almost one hundred connectors in special-shaped for selecting.
触摸式屏幕 Touch screen
工作温度Operating temp.
油桶最大容积Oil tank capacity
GD-606
GD-606C
适用 Applicable
不适用N/A
| 型号 Model | GD-606 | GD-606C | ||
| 模式 Mode | 全自动 Fully-automatic | |||
| 电源 Power supply | AC220V,50/60Hz | |||
| 加热功率 Heater power | 2500W | |||
| 清洗液瓶容积 Cleaning fluid bottle capacity | 1 | 250ml | ||
| 等量交换精度 Exchange accuracy | ±100ml | |||
| 过滤精度 Filter fineness | 5μm | |||
| 进/出油管长度 Inlet/outlet hose length | 2.5m | |||
| 1.5m | ||||
| 排油管长度 Discharge hose length 油泵功率 Oil pump power | 140W | |||
| 毛净重 N.W. / G.W. | 65.4 /72.4kg | |||
| 包装尺寸Dimension | 510*540*1075mm/685*435*1180mm | |||
参数 Parameters
| 型号 Model | GD-605 | GD-605C |
| 模式 Mode | 全自动 Fully-automatic | |
| 电源 Power supply | AC220V,50/60Hz | |
| 加热功率 Heater power | 1 | |
| 清洗液瓶容积 Cleaning fluid bottle capacity | 1 | 250ml |
| 等量交换精度 Exchange accuracy | ±100ml | |
| 过滤精度 Filter fineness | 5μm | |
| 进/出油管长度 Inlet/outlet hose length | 2.5m | |
| 排油管长度 Discharge hose length | 1.5m | |
| 油泵功率 Oil pump power | 140W | |
| 毛净重 N.W. / G.W. | 65.4 /72.4kg | |
| 包装尺寸 Dimension | 510*540*1075mm/685*435*1180mm | |
油桶最大容积Oil tank capacity
GD-505
GD-505C
不适用N/A
| 型号 Model | GD-505 | GD-505C |
| 模式 Mode | 全自动 Fully-automatic | |
| 电源 Power supply | AC110/AC220V, 50/60HzDC12V(可选 optional) | |
| 加热功率 Heater power | 1 | |
| 清洗液瓶容积 Cleaning fluid bottle capacity | 1 | 250ml |
| 等量交换精度 Exchange accuracy | ±100ml | |
| 过滤精度 Filter fineness | 5μm | |
| 进/出油管长度 Inlet/outlet hose length | 2.5m | |
| 排油管长度 Discharge hose length | 1.5m | |
| 油泵功率 Oil pump power | 140W | |
| 毛净重 N.W. / G.W. | 61/68kg | |
| 包装尺寸 Dimension | 510*540*1075mm/685*435*1180mm | |
专利新旧油可视化设计 Patented Visualization Design
耐高温.耐压。耐冲击 High temperature resistance Pressure resistance Impact resistance
智能等量交换 Intelligent Equal Volume Oil Exchange
通过主板精细控制和精密电子秤测量，实现高换 油率，同时节省新油使用量。
新旧油置换量精确到±100ml。
High oil change rates and savings on new oil usage through fine control and precision
electronic scale measurement.
The amount of new and used oil replacement is accurate to ±100ml.
可旋转进出油管Rotatable Oil Inlet and OutletPipes
滚珠结构，防止因油管旋转磨损密封圈。 兼具易操作性，同时避免漏油风险。 Ball structure to prevent the seal from being worn by the rotation of the oil pipe. Easy handling while avoiding the risk of oil leakage.
智能识别进出油口技术 Automatic Flow Direction Detection
多层工具槽后门盖Door with Multi-layerTool Trays
上盖易维修设计Easy Maintenance Design
掀盖式设计，日常设备维护无需费力拆箱。 Lift-lid design, daily maintenance without the need for laborious unboxing.
油桶油位窗口
Window to Show Oil Level
in the Drum
具备循环清洗和循环换油功能 Including Circuit Flushing / Circuit Oil Changing Function
可调节高度悬挂杆Height-adjustableSuspension Bar
供应多种规格接头 Offer a Wide Range of Connectors
标配多种规格的变速箱管路连接适配接头，适用于大部分车型，且设计有近百种专用的异型接头供客户选购。
Comes with various connectors which match with various gearbox pipes so as to accommodate most of car. Moreover, there is almost one hundred connectors in special-shaped for selecting.
智能识别进出油口技术Automatic Flow DirectionDetection
工作温度Operating temp.
油桶最大容积Oil tank capacity
适用 Applicable
不适用N/A
参数 Parameters
| 型号 Model | GD-332 |
| 模式 Mode | 全自动Fully-automatic |
| 电源 Power supply | DC12V AC110/AC220V,50/60Hz(可选Optonal) |
| 等量交换精度 Exchange accuracy | ±100ml |
| 过滤精度 Filter fineness | 5μm |
| 进/出油管长度 Inlet/outlet hose length | 2.5m |
| 排油管长度Discharge hose length | 1.5m |
| 油泵功率 Oil pump power | 140W |
| 毛净重 N.W./ G.W. | 40 /43.9kg |
| 包装尺寸Dimension | 595*465*1115mm |
专利新旧油可视化设计 Patented Visualization Design
耐高温.耐压。耐冲击 High temperature resistance Pressure resistance Impact resistance
外置过滤器External Filter
方便维护更换。
模具化过滤器盖更美观。
Easy to Maintain and Replace.
Molded filter cover, neat & good-looking.
具备循环清洗和循环换油 功能 Including Circuit Flushing /Circuit Oil Changing Function
自动变速箱油位调整 Automatic Gear Box Oil Level Adjustment
单独向波箱内补充新油，或单独从 波箱里排出新油。 Replenish or discharge new oil to keep specific oil level in gear box.
供应多种规格接头 Offer a Wide Range of Connectors
标配多种规格的变速箱管路连接适配接头，适用于大部分车型，且设计有近百种专用的异型接头供客户选购。
Comes with various connectors which match with various gearbox pipes so as to accommodate most of car. Moreover, there is almost one hundred connectors in special-shaped for selecting.
适用 Applicable
不适用N/A
参数 Parameters
| 型号 Model | GA-322 | GD-322B |
| 模式 Mode | Manual | Manual |
| 电源 Power supply | Air compressor | AC220V/50Hz/1pH |
| 过滤精度 Filter fineness | 5μm | 5μm |
| 进/出油管长度 Inlet/outlet hose length | 2.5m | 2.5m |
| 油泵功率 Oil pump power | 1 | 250W |
| 毛净重 N.W./ G.W. | 35.5/38.5kg | 38/51kg |
| 包装尺寸 Dimension | 595*465*1115mm | 595*465*1115mm |
BRAKE BLEEDER制动液更换机
低液位自动关停 Automatic Shutdown at Low Liquid Level.
| 型号 Model | DS-500 |
| 新油瓶容积New oil bottle capacity | 5L |
| 废油瓶容积 Waste oil bottle capacity | 1LX2 |
| 电压 Voltage | AC220V |
| 功率 Power | 55W |
| 工作压力Operating pressure | 1-2.2 bar |
| 最大压力Maximum pressure | 2.8 bar |
一键快速换油
Quick Oil Change with One Button 换液压力可调
Adjustable fluid change pressure.
可同时置换双分泵油
Simultaneous Replacement of
Dual Brakes
接头内置过滤网 Connector with built-in filter 有效隔离异物，保证无杂质进入汽车管路 Effective isolation of foreign matter, to ensure that no impurities into the car pipeline.
可选配新型万用接头 Optional New Universal Adaptor 专利设计，内置强力密封圈，具有反 向自锁功能 Patented Design, Built-In Strong Sealing Ring, with Reverse Self-Locking Function
适配各类刹车液壶接口，可多方位调节 Compatible with all kinds of brake fluid jug interface, can be adjusted in multiple directions.
即使刹车油壶只剩1-2个丝扣，也能锁紧 It locks tight even if the reservoir top is worn.
可选配移动小车Optional Mobile Trolley Available无油停机功能，保护设备使用更安心Automatic Cut off ProtectionFunction is Available.
参数 Parameters
| 型号Model DS-520 | |
| 罐体容积 Tank capacity 18L(4.7 Gallon) | |
| 电压 Voltage AC110~220V/DC12V(Optional) | |
| 功率 Power 70W | |
| 工作压力Operating pressure 1-2.2 bar | |
| 最大压力Maximum pressure 2.5 bar | |
大通径残液排放口设计
Large Diameter Residual Liquid
Discharge Port Design
具收纳，防尘收集残油为一体的工具 盒设计 Adaptor Collection Box Design with Storage, Dustproof And Oil Residue Collection As One Design
接头内置过滤网 Connector with built-in filter 有效隔离异物，保证无杂质进入汽车管路 Effective isolation of foreign matter, to ensure that no impurities into the car pipeline.
专利设计，内置强力密封圈，具有反 向自锁功能 Patented Design, Built-In Strong Sealing Ring, with Reverse Self-Locking Function
即使刹车油壶只剩1-2个丝扣，也能锁紧 It locks tight even if the reservoir top is worn.
灵活把手设计Flexible Handle Design
符合使用惯性，更有效保护设备
Conforms to usage habits and protects devicesmore effectively.
ELECTRIC COOLANTEXCHANGER电动冷却液更换机
回收旧液
Recycle waste
coolant
加注新液Add new coolant
快速更换Rapid exchange
检漏 Leak check
循环清洗(选配) Coolant flushing (optional)
外置式清洗过滤套件(选配) External cleaning & filtering kit(optional)
参数 Parameters
| 型号 Model | GD-515 |
| 电压 Voltage | AC220V |
| 电机功率 Motor power | 120W |
| 气源压力Working pressure of exchanging | 5-8 bar |
| 检漏工作压力Working pressure of leak checking | <1.2 bar |
| 检漏气管长度 Leak check hose length | ≈2.5m |
| 进/出液管长度Recharge/return hose length | ≈2.5m |
| 旧液桶容积 Capacity of waste coolant tank | ≈25L |
| 泵最大流量 Max. pumping capacity | ≈7L/min |
| 机器尺寸 Machine dimensions | 540*480*1320 mm |
换液进度可视化 Visible Progress of Fluid Change
新旧冷却液可同时更换
New and used coolant can be changed at the same
time
进出液管标识清晰
Clearly Marked Inlet/Outlet
Coolant Hoses Makes The Machine
Very Easy to Use
69
抽真空和冷却液加注可同步进行 Vacuum Extraction & Pressure Filling of Coolant at The Same Time
抽真空 Vacuum
冷却液加注 Coolant refill
加压检漏功能Leak Check Function
提高检修效率 Improved overhaul efficiency
回收旧液
Recycle waste
coolant
加注新液Add new coolant
快速更换Rapid exchange
检漏 Leak check
循环清洗（选配) Coolant flushing (optional)
外置式清洗过滤套件(选配) External cleaning & filtering kit(optional)
参数 Parameters
| 型号 Model | GD-535 |
| 电压 Voltage | DC12V (AC200V optional选配) |
| 电机功率 Motor power | 120W |
| 换液工作压力Working pressure of exchanging | ≤1.5 bar |
| 检漏工作压力Working pressure of leak checking | <1.2 bar |
| 进/出液管长度 Recharge/return hose length | ≈2.5m |
| 排液管长度Fluid discharge hose length | ≈2m |
| 旧液桶容积 Capacity of waste coolant tank | ≈16L |
| 泵最大流量 Max. pumping capacity | ≈7L/min. |
| 机器尺寸Machine dimensions | 450*450*1350 mm |
使用简单Ease-of-use
通过智能操作面板可轻松选择各种模式功能 Enables to select different modes through the intelligent operation panel
双泵设计 Dual Pumps Separate The New Coolant from The Used
确保新液不被污染
Ensuring zero cross-contamination of the new
coolant
新颖专利内外双层液罐设计Distinctive Double WallTank Design
为新液加温，保护汽车发动机及其管路 Guarantees safe operations and cleverly warms the new coolant during exchange; Protects the engine and pipelines in the cooling system
加压检漏功能Leak Check Function
提高检修效率 Improved overhaul efficiency
WASTE OILDRAINER/EXTRACTOR废油抽接油机
适用 Applicable
参数 Parameters
| 型号 Model | HD-2380 | HD-2390 |
| 电源 Power supply | AC220V/50Hz/1PH | AC220V/50Hz/1PH |
| 功率 Power | ≤370W | ≤370W |
| 排油压力 Oil ejection pressure | 0.5 bar / 7 psi | 0.5 bar / 7 psi |
| 抽油温度 Operating temperature | 40~60℃ | 40~60℃ |
| 吸力速度 Suction speed(max.) | 0.4~0.5 Gallon/m | 0.4~0.5 Gallon/m |
| 净重/毛重 N/G weight | 32/35 kg | 36/42 kg |
| 包装尺寸 Package dimension | 500*455*1265mm | 500*455*1265/450*450*300mm |
延伸盘（塑料、选配） Extension(plastic, optional)
专利防飞溅加大延伸盘。
加大容量，防漏设计。
可拆御，缩减运输空间。
Patented anti-splash enlarged extension.
Enlarged capacity, leak-proof design.
Detachable, reduce transport space.
移动保护支架 Protective Bracket
保护量杯，提供卷纸辊悬挂的设计。Protect the chamber, design forpaper roll hanging.
移动工具盒 Mobile Tool Box
方便盛装工具及配件，随设备移动到工位进行作业。 Convenient for carrying tools & parts, and moving tc the work station with the equipment for work.
液位管保护罩
Liquid Level Display Tube Protection Cover 加强版带刻度保护罩，有效保护内部液位管不受意外挤 压损坏。
Strengthen protection cover with scale to prevent unexpected squeezing and damages on internal liquid level tube.
适用 Applicable
参数 Parameters
| 型号 Model | HC-2080 | HC-2081 |
| 抽真空工作压力 Air inlet pressure | 87-116 PSI | 1 |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | 1 |
| 排油压力Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度Operating temperature | 40~60℃ | 1 |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 1 |
| 净重/毛重 N/G weight | 15.4/17.6 kgs | 17/19.5 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 470*440*940 mm | 470*440*940 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 1 |
参数 Parameters
| 型号 Model | HC-2085 | HC-2090 |
| 抽真空工作压力Air inlet pressure | 87-116 PSI | 87-116 PSI |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | -1~0 bar |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度 Operating temperature | 40~60℃ | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 6.5Liter/m |
| 净重/毛重 N/G weight | 18.5/21 kgs | 19.6/22.5 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 470*440*940 mm | 470*440*940 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 270*270*575 mm |
托盘容积 Collection bowl capacity
量杯容积 Modular cylinder capacity (practicable/total)
罐体容积 Tank capacity
升降高低度 Lifting height
参数 Parameters
| 型号 Model HC-2097 |
| 抽真空工作压力Air inlet pressure 87-116 PSI |
| 进气口接口 Air inlet connection 1/4" |
| 真空度 Vacuum degree -1~0 bar |
| 排油压力 Air pressure for oil discharging 0.7~1 bar |
| 抽油温度 Operating temperature 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 6.5Liter/m及油温60℃情况下(最大)dia. ∅8 & Oil at 60°C(max.) |
| 净重/毛重 N/G weight 21.3/24.5 kgs |
| 包装尺寸(罐体)Dimension(Tank) 470*440*940mm |
| 包装尺寸(量杯)Dimension(Chamber) 270*270*575 mm |
参数 Parameters
| 型号Model | HC-2180 | HC-2181 |
| 抽真空工作压力Air inlet pressure | 87-116 PSI | 1 |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | 1 |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度Operating temperature | 40~60℃ | 1 |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 1 |
| 净重/毛重 N/G weight | 18.5/21.1 kgs | 21/24 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 490*400*1000 mm | 490*400*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 1 |
HC-2185
适用 Applicable
参数 Parameters
| 型号 Model | HC-2185 | HC-2190 |
| 抽真空工作压力 Air inlet pressure | 87-116 PSI | 87-116 PSI |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | -1~0 bar |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度 Operating temperature | 40~60℃ | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 6.5Liter/m |
| 净重/毛重 N/G weight | 22/25.5 kgs | 20/22.5 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 490*400*1000 mm | 490*400*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 270*270*575 mm |
托盘容积 Collection bowl capacity
量杯容积 Modular cylinder capacity (practicable/total)
罐体容积 Tank capacity
升降高低度 Lifting height 随机标配进口车专用抽油接头 (奔驰、宝马、大众) Comes standardly with imported cars special oil pumping connectors. (Mercedes-Benz , BMW, VW)
适用Applicable不适用N/A
参数 Parameters
| 型号 Model HC-2197 |
| 抽真空工作压力Air inlet pressure 87-116 PSI |
| 进气口接口 Air inlet connection 1/4" |
| 真空度 Vacuum degree -1~0 bar |
| 排油压力Air pressure for oil discharging 0.7~1 bar |
| 抽油温度 Operating temperature 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 6.5Liter/m及油温60℃情况下(最大)dia. ∅8 & Oil at 60°C(max.) |
| 净重/毛重 N/G weight 23/27.5 kgs |
| 包装尺寸(罐体)Dimension(Tank) 490*400*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) 270*270*575 mm |
参数 Parameters
| 型号 Model | HC-2280 | HC-2281 |
| 抽真空工作压力Air inlet pressure | 87-116 PSI | 1 |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | 1 |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度Operating temperature | 40~60℃ | 1 |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 1 |
| 净重/毛重 N/G weight | 18.5/21.5 kgs | 20.4/23.4 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 560*440*1000 mm | 560*440*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 1 |
参数 Parameters
| 型号 Model | HC-2285 | HC-2290 |
| 抽真空工作压力Air inlet pressure | 87-116 PSI | 87-116 PSI |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | -1~0 bar |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar | 0.7~1 bar |
| 抽油温度 Operating temperature | 40~60℃ | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 6.5Liter/m |
| 净重/毛重 N/G weight | 22.9/25.9 kgs | 22.2/25.8 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 560*440*1000 mm | 560*440*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 270*270*575 mm |
升降高低度 Lifting height 量杯容积 Modular cylinder capacity (practicable/total)
罐体容积 Tank capacity
随机标配进口车专用抽油接头 (奔驰、宝马、大众) Comes standardly with imported cars special oil pumping connectors. (Mercedes-Benz, BMW, VW)
适用 Applicable
| 型号 Model HC-2297 |
| 抽真空工作压力 Air inlet pressure 87-116 PSI |
| 进气口接口Air inlet connection 1/4" |
| 真空度 Vacuum degree -1~0 bar |
| 排油压力 Air pressure for oil discharging 0.7~1 bar |
| 抽油温度 Operating temperature 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe6.5Liter/m及油温60℃情况下(最大)dia. ∅8 & Oil at 60°C(max.) |
| 净重/毛重 N/G weight 26.1/29.7 kgs |
| 包装尺寸(罐体)Dimension(Tank) 560*440*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) 270*270*575 mm |
一体注塑成型螺纹量杯 One-Piece Injection Molded Threaded Chamber
120C耐高温，不易变形。
多级密封，抽油速度更快。
过高气压自动排气，安全可靠。
The patented chamber is made of 120°C high temperature resistant material, not easily deformable.
Excellent sealing performance, higher suction speed.
Automatic exhaust when the air pressure is too high, safe and reliable.
专利真空防爆一体装置 Patented Vacuum Explosion-proof Integrated Device
透明易观刻度量杯 Clear Chamber for Easy Observation of Oil Level
延伸盘（塑料、选配） Extension (plastic, optional)
专利防飞溅加大延伸盘。
加大容量，防漏设计。
可拆御，缩减运输空间。
Patented anti-splash enlarged extension.
Enlarged capacity, leak-proof design.
Detachable, reduce transport space.
残油收集杯 Residual Oil Collection
专利残油杯，专为收集使用后针管残油设计，防 止残油滴落地面，造成地面污染，省却清洗时间。 The patented cup is designed to collect residual oil from the suction tubes after use, preventing oil from dripping onto the ground and causing contamination, and saving cleaning time.
托盘容积 Collection bowl capacity
量杯容积 Modular cylinder capacity (practicable/total)
罐体容积 Tank capacity
升降高低度 Lifting height
参数 Parameters
| 型号 Model HC-2297S |
| 抽真空工作压力 Air inlet pressure 87-116 PSI |
| 进气口接口 Air inlet connection 1/4" |
| 真空度 Vacuum degree -1~0 bar |
| 排油压力 Air pressure for oil discharging 0.7~1 bar |
| 抽油温度 Operating temperature 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe6.5Liter/m及油温60℃情况下（最大）dia. ∅8 & Oil at 60°C(max.) |
| 净重/毛重 N/G weight 26.1/29.7 kgs |
| 包装尺寸(罐体)Dimension(Tank) 560*440*1000 mm |
| 包装尺寸(量杯)Dimension(Chamber) 270*270*575 mm |
一体注塑成型螺纹量杯 One-Piece Injection Molded Threaded Chamber
120C耐高温，不易变形。
多级密封，抽油速度更快。
过高气压自动排气，安全可靠。
The patented chamber is made of 120°C high temperature resistant material, not easily deformable.
Excellent sealing performance, higher suction speed.
Automatic exhaust when the air pressure is too high, safe and reliable.
专利真空防爆一体装置 Patented Vacuum Explosion-proof Integrated Device
透明易观刻度量杯 Clear Chamber for Easy Observation of Oil Level
残油收集杯 Residual Oil Collection
专利残油杯，专为收集使用后针管残油设计，防 止残油滴落地面，造成地面污染，省却清洗时间。 The patented cup is designed to collect residual oil from the suction tubes after use, preventing oil from dripping onto the ground and causing contamination, and saving cleaning time.
专利无损伤升降锁紧装置 Patented Non-damaging Lifting and Locking Device.
长期升降操作,可导致刮痕产生。
我们的产品改变传统锁紧方式，采用无损伤设计，避免泄油风险。
Long-term lifting operation can lead to scratching.
Our products change the traditional locking method and adopt non-damaging design to avoid the risk of oil leakage.
吸油针管 Oil-absorbing Syringe
进口吸油针管，配备多种规格，内置钢丝， 保护针管不轻易折断。
Imported oil suction probes with a variety of specifications.
Built-in steel wire, effectively protects the probes from breaking easily.
移动工具盒 Mobile Tool Box
方便盛装工具及配件，随设备移动到工位进 行作业。
Convenient for carrying tools & parts, and moving to the work station with the equipment for work.
液位管保护罩Liquid Level DisplayTube Protection Cover
加强版带刻度保护罩，有效保护内部液位管 不受意外挤压损坏。
Strengthen protection cover with scale to prevent unexpected squeezing and damages on internal liquid level tube.
PVC 定向脚轮PVC Directional Casters
配备大尺寸橡胶定向轮，和灵活万向轮。 Equipped with large size rubber directional casters, and flexible universal casters.
罐体容积 Tank capacity
适用 Applicable
不适用N/A
参数 Parameters
| 型号 Model | HC-3285A |
| 抽真空工作压力Air inlet pressure | 6~8 bar/87-116psi |
| 进气口接口 Air inlet connection | 1/4" |
| 真空度 Vacuum degree | -1~0 bar |
| 排油压力 Air pressure for oil discharging | 0.7~1 bar / 10~15psi |
| 抽油温度Operating temperature | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. 08 & Oil at 60°C(max.) | 6.5Liter/m |
| 净重/毛重 N/G weight | 46/50 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 560*510*1010 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 650*255*770/1320*75*110 mm |
参数 Parameters
| 型号 Model | HC-3285 | HC-3297 |
| 抽真空工作压力Air inlet pressure | 6~8 bar/87-116psi | 6~8 bar/87-116psi |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度 Vacuum degree | -1~0 bar | -1~0 bar |
| 排油压力Air pressure for oil discharging | 0.7~1 bar / 10~15psi | 0.7~1 bar / 10~15psi |
| 抽油温度 Operating temperature | 40~60℃ | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 6.5Liter/m | 6.5Liter/m |
| 净重/毛重 N/G weight | 26/29.5 kgs | 46/50 kgs |
| 包装尺寸(罐体)Dimension(Tank) | 550*450*1010 mm | 560*510*1010 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 650*255*770/1320*75*110 mm |
一体注塑成型螺纹量杯 One-Piece Injection Molded Threaded Chamber
120C耐高温，不易变形多级密封，抽油速度更快过高气压自动排气，安全可靠
The patented chamber is made of 120°C high temperature resistant material, not easily deformable.
Excellent sealing performance, higher suction speed.
Automatic exhaust when the air pressure is too high, safe and reliable.
专利真空防爆一体装置 Patented Vacuum Explosion-proof Integrated Device
透明易观刻度量杯 Clear Chamber for Easy Observation of Oil Level
移动保护支架 Protective Bracket
保护量杯，提供卷纸辊悬挂的设计。Protect the chamber, design forpaper roll hanging.
移动工具盒 Mobile Tool Box
方便盛装工具及配件，随设备移动到工位进行作业。 Convenient for carrying tools & parts, and moving to the work station with the equipment for work.
残油收集杯 Residual Oil Collection
专利残油杯，专为收集使用后针管残油设计，防 止残油滴落地面，造成地面污染，省却清洗时间。 The patented cup is designed to collect residual oil from the suction tubes after use, preventing oil from dripping onto the ground and causing contamination, and saving cleaning time.
易升把手&专利无损伤升降锁紧装置 Lift Handle Bar & Patented non-damaging Lifting and Locking Device.
长期升降操作,可导致刮痕产生。
我们的产品改变传统锁紧方式，采用无损伤设计， 避免泄油风险。
Long-term lifting operation can lead to scratching. Our products change the traditional locking
method and adopt non-damaging design to
avoid the risk of oil leakage.
廷伸盘（金属、选配） Extension Tray (Metal, optional)
P
采用组合式液压机成型，标准、可靠。
可选配超大加长油盘，防飞溅。
内部金属过滤器。
Adopt combined hydraulic press molding, standard and reliable.
Optional extra-large extended oil pan, splash-proof.
Internal metal filter included.
吸油针管 Oil-absorbing Syringe
进口吸油针管，配备多种规格，内置钢丝， 保护针管不轻易折断。
Imported oil suction probes with a variety of specifications.
Built-in steel wire, effectively protects the probes from breaking easily.
PVC 定向脚轮PVC Directional Casters
配备大尺寸橡胶定向轮，和灵活万向轮。 Equipped with large size rubber directional casters, and flexible universal casters.
托盘容积 Collection bowl capacity
罐体容积 Tank capacity
升降高低度 Lifting height
适用 Applicable
不适用N/A
参数 Parameters
| 型号Model | HC-4081 | HC-4085 |
| 抽真空工作压力Airinlet pressure | 1 | 6~8 bar/87-116psi |
| 进气口接口 Air inlet connection | 1/4" | 1/4" |
| 真空度Vacuum degree | 1 | -1~0 bar |
| 排油压力 Air pressure for oil discharging | ≤1bar/≤15psi | ≤1bar/≤15psi |
| 抽油温度Operating temperature | 40~60℃ | 40~60℃ |
| 抽油速度 @抽油针管直径∅8 Suction Speed@Probe 及油温60℃情况下（最大） dia. ∅8 & Oil at 60°C(max.) | 1 | 6.5Liter/m |
| 净重/毛重 N/G weight | 18.7/21.2 kgs | |
| 包装尺寸(罐体)Dimension(Tank) | 540*460*770 mm | 540*460*770 mm |
| 包装尺寸(量杯)Dimension(Chamber) | 1 | 1 |
专利无损伤升降锁紧装置 Patented Non-damaging Lifting and Locking Device.
长期升降操作,可导致刮痕产生。
我们的产品改变传统锁紧方式，采用无损伤设计，避免泄油风险。
Long-term lifting operation can lead to scratching.
Our products change the traditional locking method and adopt non-damaging design to avoid the risk of oil leakage.
吸油针管 Oil-absorbing Syringe
进口吸油针管，配备多种规格，内置钢丝， 保护针管不轻易折断。
Imported oil suction probes with a variety of specifications.
Built-in steel wire, effectively protects the probes from breaking easily.
移动工具盒 Mobile Tool Box
方便盛装工具及配件，随设备移动到工位进 行作业。
Convenient for carrying tools & parts, and moving to the work station with the equipment for work.
PVC 定向脚轮PVC Directional Casters
配备大尺寸橡胶定向轮，和灵活万向轮。 Equipped with large size rubber directional casters, and flexible universal casters.
NITROGEN TYREINFLATOR氮气机
YS-7701F/MO YS-7701F YS-7702F
| 型号 Model | YS-7701F/MO | YS-7701F | YS-7702F |
| 模式 Mode | 全自动 Fully automatic | ||
| 屏幕 Screen | LED | LED | LCD |
| 卷管器 Hose reel | 1 | ||
| 软管 Hose | 1 | ||
| 高精过滤器 High precision filter | 1 | ||
| 油水过滤装置 Waterl oil filter & separator | π | ||
| 电压 Voltage | AC220V ± 10%,50/60HZ | ||
| 功率 Power | 46W | ||
| 氮气纯度 Nitrogen purity | 95-99% | ||
| 空气进气压力 Air inlet pressure | 9-10bar / 130-145 psi | ||
| 空压机要求 Air compressor required | 5.5~7.5kw,10bar,1~1.5m³/min. | ||
| 氮气输出压力 N2 output pressure | 1-6bar/15-87psi | ||
| 输出流量 Output air flow rate | 50-70L/min.13.2-18.5 gallon/min. | ||
| 储气罐容积 N2 tank capacity | 70L/18.5 gallon | ||
WS90-2C WS90-FC WS90-2FC WS90-4FX
| 型号 Model WS90-2C WS90-FC WS90-2FC WS90-4FX模式 Mode 全自动 Fully automatic屏幕 Screen LED | |||
| 抽真空功能 Vacuum √ | √ | √ | / |
| 过充功能 OPS system √ | √ | √ | V |
| 循环充功能 N2P system / | / | / | √ |
| 卷管器Hose reel / | 1 | 2 | 4 |
| 软管 Hose 2 | / | / | / |
| 高精过滤器High precision filter 1 | |||
| 油水过滤装置 Waterl oil filter & separator 1 | |||
| 电压Voltage AC220V/1PH/50HZ | |||
| 功率 | Power 64W | ||
| 氮气纯度 Nitrogen purity 95-99% | |||
| 空气进气压力 Air inlet pressure 9~10bar/130~145psi | |||
| 空压机要求 Air compressor required 5.5-7.5kw,10bar,1-1.5m³/min. | |||
| 氮气输出压力 N2 output pressure 1-6bar/15-87psi | |||
| 氮气高纯度模式 N2 High purity mode 98% & 40~60L/min. | |||
| 氮气标准模式 N2 Standard mode 95% & 90~110L/min. | |||
| 氮气大流量模式 N2 Large flow mode 92% & 110~130L/min. | |||
| 储气罐容积 N2 tank capacity 90L | |||
WS90C-FC WS90D-FC WS90-FC/MO
WS90D-FC
WS90-FC/MO
工作温度Operating temperature
| 型号 Model WS90D-FC WS90C-FC WS90-FC/MO模式 Mode 全自动 Fully automatic屏幕 Screen LED | ||
| 抽真空功能 Vacuum √ | √ | √ |
| 过充功能 OPS system 1 | √ | √ |
| 循环充功能 N2P system 1 | 1 | 1 |
| 卷管器 Hose reel 1 | 1 | 1 |
| 软管 Hose 1 | ||
| 高精过滤器 High precision filter 1 | ||
| 油水过滤装置 Waterl oil filter & separator 1 | ||
| 电压 Voltage AC220V/1PH/50HZ | ||
| 功率 Power 64W | ||
| 氮气纯度 Nitrogen purity 92-99% | ||
| 空气进气压力 Air inlet pressure 15-16bar/218-230 psi | 9-10bar / 130-145 psi | |
| 空压机要求Air compressor required 15kw,16bar,1.5m³/min. | 5.5-7.5kw,10bar,1-1.5m³/min. | |
| 氮气输出压力 N2 output pressure 1-6bar/15-87psi | ||
| 氮气高纯度模式 N2 High purity mode 98% & 40~60L/min. | ||
| 氮气标准模式 N2 Standard mode 95% & 90~110L/min. | ||
| 氮气大流量模式 N2 Large flow mode 92% & 110~130L/min. | ||
| 储气罐容积 N2 tank capacity 90L | ||
包装防护支架 Protection Bracket
为氮气机屏幕提供全方位保护 Provides comprehensive protection to the machine head.
确保高分子筛持久耐用 Ensure long-lasting molecular sieves.
三种充氮气模式可选
Three Nitrogen Filling Modes
Are Available
氮气和空气填充可自由转换 Nitrogen And Air Filling Can Be Freely Converted.
过充功能(OPS) Equipped with Over Pressure System
适当的增压，让轮胎与轮辋更紧密结合 Properly pressurized for a closer fit of the tyre to the rim.
具备氮气/空气循环充(N2P)功能 Equipped with Nitrogen & Air Purging System(N2P)
令轮胎里的氮气纯度更高 To get as much oxygen, water, and other gases out of the tyre as possible.
可独立预设前后轮胎胎压
Tyre Pressure Can Be Preset for
Front And Rear Tyres
Respectively
带有4个卷管器的机型，可同时为4个轮胎充气 Model with 4 hose reel can inflate 4 tyres at the same time.
\*限以下型号Only for the following models: WS90-2CII/WS90-2CXII/WS90-2FCII/WS90-2FCXII/ WS90-2FXII/WS90-2XII/WS90-4FXII/WS90-4XII
双屏幕Dual Screen
可同时展示前后轮胎数据 Front and rear tyre pressure data can be displayed simultaneously.
翻盖设计 Easy Maintenance Design
顶盖可90°前翻，方便日常维护 The head cover can be flipped forward 90° for convenient daily maintenance.
