该页无缩略图
磁性表座(小球形万向)
Small Universal Spherical Joint Magnetic Stand
产品符合JB/T10010标准。
According with JB/T10010 respectively.
| 产品编号 Cat. No | 规格kg Specifications | 座体尺寸 The Size |
| NH-HP-1 | 30 | 36×30×35 |
磁性表座(柔性万向)
Flexible Universal Magnetic Stand
产品符合JB/T10010标准。
According with JB/T10010 respectively.
| 产品编号 Cat. No | 规格kg Specifications | 座体尺寸 The Size |
| CV-6CA | 60 | 58×50×55 |
万能表座
Fine Tuning Universal Stand For Dial Indicator
SG
| 产品编号 Cat. No | 座体尺寸 The Size | H | L |
| WWZ-220 | 220×58×35 | >190 | >220 |
03-1 数显外径千分尺
Digital Outside Micrometer
03-2 外径千分尺
Outside Micrometer
03-3 杠杆千分尺
Lever Micrometer
03-4 小测头千分尺
Small Probe Micrometer
03-4 微米千分尺
Micrometer With μ M Reading
03-5 壁厚千分尺
Wall Thickness Micrometer
02-5 数显公法线千分尺(直进式)
Micrometer For Measruing Root Tangent Lengths Of Gear Teeth
03-6 公法线千分尺(直进式)
Digital Micrometer For Measruing Root Tangent Lengths Of Gear Teeth
03-6 内测千分尺
Inside Micrometer
03-7 尖头千分尺
Pointed-Contact Micrometer With Conical Tips
03-7 数显尖头千分尺
Digital Pointed-Contact Micrometer With Conical Tips
03-8 两点内径千分尺(单管式)
Internal Micrometers With Two-Point Contact
03-8 两点内径千分尺
Internal Micrometers With Two-Point Contact
03-13 数显深度千分尺
Digital Depth Micrometer
03-13 深度千分尺
Depth Micrometer
03-14 数显三爪内径千分尺
Digital Inside Micrometer With Three-Point Contact
03-15 三爪内径千分尺
Digital Inside Micrometer With Three-Point Contact
03-16 数显三爪内径千分尺(套装)
Inside Micrometer With Three-Point Contact
03-16 三爪内径千分尺(套装)
Inside Micrometer With Three-Point Contact
03-17 测微头
Head Micrometer
03-17 带螺纹测微头
Screw Micrometer Heard
03-18 千分尺座
Mixrometer Stand
03-18 V形磁座
V-shape Magnetic Base
上☆工
上☆工®
数显外径千分尺
Digital Outside Micrometer
产品符合GB/T20919标准。
外径千分尺广泛应用于外尺寸的精密测量。
数显外径千分尺是普通外径千分尺的升级换代
产品，具有普通外径千分尺无法实现的综合测量功能。
测量系统由电容式角位移传感器和电子数显部件组成。
液晶显示器可以直接读测量值，最小分辨力为0.001mm。
通信接口通过专用接口可与计算机打印机连接。
温度影响：相对湿度，≤80%不受影响。
工作温度 : 0 ^ { \circ } \mathsf { C } ~ 4 0 ^ { \circ } \mathsf { C } _ { \circ }
According with GB/T20919 respectively.
Digital Outside Micrometer are widely used for precision measurement.
The digital outside micrometer is an upgraded product of the ordinary outside micrometer, which has the comprehensive measurement function that the ordinary outside micrometer cannot achieve.
Measuring system combined by the capacitive angular displacement sensor and electronic digital display parts.
Measured values can be read directly from display, the minimum resolution of 0.001 mm.
The micrometer can be connected to the computer and printer by special interface.
Relative humidity 80% or less is not affected.
Working temperature: 0 \ ^ { \circ } \mathsf { C } 4 0 \ ^ { \circ } \mathsf { C } .
| 产品编号 Cat. No | 测量范围 Range(mm/in) | 允许误差 Error(mm/in) | 分辨力 Resolution(mm/in) | (mm) | (mm) | (mm) |
| TA025A | 0-25/0-1 | ±0.002 | 0.001/0.0001 | 155 | 34 | 25 |
| TA050A | 25-50/1-2 | ±0.002 | 0.001/0.0001 | 180 | 59 | 32 |
| TA075A | 50-75/2-3 | ±0.003 | 0.001/0.0001 | 200 | 84 | 45 |
| TA100A | 75-100/3-4 | ±0.003 | 0.001/0.0001 | 225 | 109 | 57 |
外径千分尺
Outside Micrometer
产品符合GB/T 1216标准。
测量面镶硬质合金。
带锁紧装置，棘轮装置可保证测力恒定。
尺架表面镀铬,或涂塑。
25mm以上配有校对量杆。
The product is according with GB/T 1216.
Carbide measuring face.
With lock nut, Ratchet stop.
Chrome-Plated frame or plastic coated surface.
Over 25mm with anvil.
| KQ300025102 | 0-25 | 0.01 | 0.004 | 0.5 | 31.4 | 3.2 | 8 | 22 |
| KQ300050102 | 25-50 | 0.01 | 0.004 | 0.5 | 56.4 | 3.2 | 8 | 27 |
| KQ300075102 | 50-75 | 0.01 | 0.005 | 0.5 | 81.4 | 3.2 | 10 | 45 |
| KQ300100102 | 75-100 | 0.01 | 0.005 | 0.5 | 106.4 | 3.2 | 12 | 57 |
| 涂塑面 Plastic Coated Surface | |||||||
| BA025B | 0-25 | 0.01 | 0.004 | 0.5 | 31 | 3 | 8 22 |
| BA050B | 25-50 | 0.01 | 0.004 | 0.5 | 56 | 3 8 | 27 |
| BA075B | 50-75 | 0.01 | 0.005 | 0.5 | 81 3 | 10 | 45 |
| BA100B | 75-100 | 0.01 | 0.005 | 0.5 | 106 | 3 12 | 57 |
| KQ300125102 | 100-125 | 0.01 | 0.006 | 0.5 | 132 | 3.5 17.2 | 74 |
| KQ300150102 | 125-150 | 0.01 | 0.006 | 0.5 | 157 | 3.5 17.2 | 86.8 |
| KQ300175102 | 150-175 | 0.01 | 0.007 | 0.5 | 182 | 3.5 21.2 | 105.3 |
| KQ300200102 | 175-200 | 0.01 | 0.007 | 0.5 | 207 | 3.5 21.4 | 117.5 |
| KQ300225102 | 200-225 | 0.01 | 0.008 | 0.5 | 232 | 3.5 22.8 | 131 |
| KQ300250102 | 225-250 | 0.01 | 0.008 | 0.5 | 257 | 3.5 22.8 | 144 |
| KQ300275102 | 250-275 | 0.01 | 0.008 | 0.5 | 282 | 3.5 22.8 | 154.5 |
| KQ300300102 | 275-300 | 0.01 | 0.009 | 0.5 | 307 | 3.5 22.8 | 166.7 |
上☆工
杠杆千分尺
Lever Micrometer
产品符合GB/T8061标准。
杠杆千分尺可用于直接测量和比较测量。
圆柱零件直径的快速测量，圆度测量和平行度的测量。
刻度盘调零装置，使用方便。
具有公差指示器，便于对成批工件尺寸合格与否快速检测。
According with GB/T8061 respectively.
It is mainly used for outside measurement and form tolerance measurement.
It can make direct measurement and comparative measurement.
It can make fast measurement of cylinder diameter, roundness, and parallelism.
With dial face to set zero, easy to use.
With tolerance markers, easy for quick check the batch parts are qualified or not.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) | 允许误差 Error(mm) | (mm) | (mm) | (mm) |
| BK025A | 0-25 | 0.001 | 0.003 | 160 | 33 | 16 |
| BK050A | 25-50 | 0.001 | 0.003 | 185 | 58 | 30 |
| BK075A | 50-75 | 0.001 | 0.004 | 210 | 83 | 43 |
| BK100A | 75-100 | 0.001 | 0.004 | 235 | 108 | 55 |
S
小测头千分尺
Small Probe Micrometer
产品符合JB/T10005标准。
According with JB/T10005 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 允许误差 Error(mm) | 分度值 Reading(mm) | (mm) | (mm) |
| WQX-25-013 | 0-25 | 0.003 | 0.01 | 56.4 | 02、3 |
| WQX-50-013 | 25-50 | 0.004 | 0.01 | 81.4 | 02、3 |
| WQX-75-013 | 50-75 | 0.005 | 0.01 | 106.4 | 02、3 |
微米千分尺
Micrometer With μm Reading
产品符合JB/T10032标准。
According with JB/T10032 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| WQW-25-013 | 0-25 | 0.001 |
| WQW-50-013 | 25-50 | 0.001 |
| WQW-75-013 | 50-75 | 0.001 |
| WQW-100-013 | 75-100 | 0.001 |
上☆工
壁厚千分尺
Wall Thickness Micrometer
产品符合GB/T6312标准。
主要用于测量管件壁厚和普通外尺寸。
According with GB/T6312 respectively. It is mainly used for measuring pipe wall thickness or common external dimension.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) | 允许误差 Error(mm) |
| BD025A | 0-25(球型) | 0.001 | 0.004 |
| BD050A | 25-50(球型) | 0.001 | 0.004 |
| BD025B | 0-25(刀口型) | 0.001 | 0.006 |
| BD050B | 25-50(刀口型) | 0.001 | 0.006 |
数显公法线千分尺(直进式)
Digital Micrometer For Measruing Root Tangent Lengths Of Gear Teeth(Non-Rotating Spindle)
产品符合GB/T1217标准。
盘头测量面适用于测量齿轮、纸厚等。
According with GB/1217respectively. With the pan head measuring surface, easy to measue gear, paper thickness, etc.
| TB025A | 0.004 | 0.001 | 8 | 32 | 43 | Φ20 | 0.7 | Φ8 |
| TB050A | 0.004 | 0.001 | 8 | 44.5 | 68 | Φ20 | 0.7 | Φ8 |
| TB075A | 0.005 | 0.001 | 8 | 57 | 93 | Φ20 | 0.7 | Φ8 |
| TB100A | 0.005 | 0.001 | 10 | 70 | 118.5 | Φ20 | 0.7 | Φ8 |
| TB125A | 0.006 | 0.001 | 10 | 82 | 144 | Φ30 | 0.9 | Φ11.5 |
| TB150A | 0.006 | 0.001 | 12 | 94.5 | 169.5 | Φ30 | 0.9 | Φ11.5 |
| TB175A | 0.007 | 0.001 | 12 | 107 | 194.8 | Φ30 | 0.9 | Φ11.5 |
| TB200A | 0.007 | 0.001 | 12 | 120 | 220 | Φ30 | 0.9 | Φ11.5 |
公法线千分尺(直进式)
Micrometer For Measruing Root Tangent Lengths Of Gear Teeth(Non-Rotating Spindle)
产品符合GB/T1217标准。
盘头测量面适用于测量齿轮、纸厚等。
According with GB/T1217 respectively. With the pan head measuring surface, easy to measue gear, paper thickness, etc.
| BB025A | 0-25 | 0.004 | 0.01 | 34 | 24 | 20 | 0.7 | 8 |
| BB050A | 25-50 | 0.004 | 0.01 | 59 | 32 | 20 | 0.7 | 8 |
| BB075A | 50-75 | 0.005 | 0.01 | 85 | 45 | 20 | 0.7 | 8 |
| BB100A | 75-100 | 0.005 | 0.01 | 110 | 57 | 20 | 0.7 | 8 |
| BB125A | 100-125 | 0.006 | 0.01 | 138 | 70 | 30 | 0.9 | 12 |
| BB150A | 125-150 | 0.006 | 0.01 | 163 | 82 | 30 | 0.9 | 12 |
| BB175A | 150-175 | 0.007 | 0.01 | 188 | 95 | 30 | 0.9 | 12 |
| BB200A | 175-200 | 0.007 | 0.01 | 214 | 107 | 30 | 0.9 | 12 |
内测千分尺
Inside Micrometer
产品符合JB/T10006标准。
内测千分尺主要用于测量内孔尺寸和普通内尺寸。
测量范围大，精度高。
具有测力装置。
具有千分螺丝锁紧装置。
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) | 环规 Ring Gauge |
| BF030A | 5-30 | 0.01 | 有 |
| BF050A | 25-50 | 0.01 | 有 |
| BF075A | 50-75 | 0.01 | - |
| BF100A | 75-100 | 0.01 |
测量面镶硬质合金。
分辨力Resolution(mm)
上☆工
数显尖头千分尺
Digital Pointed-Contact Micrometer With Conical Tips
产品符合GB/T6313标准。
According with GB/T6313 respectively.
测量面镶硬质合金。
Carbide measuring face.
IP65防护等级。
IP65 proteceion degree.
允许误差 Error(mm)
| TE025A | 0-25 | ±0.002 | 0.001 | 60 | 32 |
| TE050A | 25-50 | ±0.002 | 0.001 | 85 | 44 |
| TE075A | 50-75 | ±0.003 | 0.001 | 110 | 57 |
| TE100A | 75-100 | ±0.003 | 0.001 | 135 | 70 |
尖头千分尺
Pointed-Contact Micrometer With Conical Tips
According with GB/T6313 respectively.
Carbide measuring face.
| 产品编号 Cat. No | 测量范围 Range(mm) | 允许误差 Error(mm) | 分度值 Reading(mm) | (mm) | (mm) |
| BE025A | 0-25 | 0.004 | 0.01 | 57 | 32 |
| BE050A | 25-50 | 0.004 | 0.01 | 82 | 48 |
| BE075A | 50-75 | 0.005 | 0.01 | 107 | 61 |
| BE100A | 75-100 | 0.005 | 0.01 | 132 | 74 |
| BE125A | 100-125 | 0.006 | 0.01 | 158 | 82 |
| BE150A | 125-150 | 0.006 | 0.04 | 183 | 95 |
两点内径千分尺(单管式)
Internal Micrometers With Two-Point Contact
产品符合GB/T8177标准。
According with GB/T8177 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| BH75E | 50-75 | 0.01 |
| BH175E | 150-175 | 0.01 |
两点内径千分尺
Internal Micrometers With Two-Point Contact
产品符合GB/T8177标准。
带有两个用于测量内尺寸测砧，并以螺旋副作为中间实物量具的内尺寸测量器具
主要用于测量工件的内径、槽宽和两内表面之间的距离。
测量范围大，可根据测量范围选用不同的接杆组合。
接杆精度高，更换接杆时不需要重新对零位。
具有千分螺丝锁紧装置。
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) | 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| BH100A | 50-100 | 0.01 | BH1400B | 100-1400 | 0.01 |
| BH175A | 50-175 | 0.01 | BH1500B | 100-1500 | 0.01 |
| BH250A | 50-250 | 0.01 | BH1600B | 100-1600 | 0.01 |
| BH300A | 50-300 | 0.01 | BH1800B | 100-1800 | 0.01 |
| BH500A | 50-500 | 0.01 | BH2000B | 100-2000 | 0.01 |
| BH600A | 50-600 | 0.01 | BH1400C | 150-1400 | 0.01 |
| BH1000A | 50-1000 | 0.01 | BH2000C | 150-2000 | 0.01 |
| BH1500A | 50-1500 | 0.01 | BH2100C | 150-2100 | 0.01 |
| BH200B | 100-200 | 0.01 | BH500D | 300-500 | 0.01 |
| BH300B | 100-300 | 0.01 | BH800D | 300-800 | 0.01 |
| BH400B | 100-400 | 0.01 | BH1300D | 300-1300 | 0.01 |
| BH500B | 100-500 | 0.01 | BH1600D | 300-1600 | 0.01 |
| BH800B | 100-800 | 0.01 | BH2200D | 300-2000 | 0.01 |
| BH900B | 100-900 | 0.01 | BH1500D | 1000-1500 | 0.01 |
| BH1000B | 100-1000 | 0.01 | BH3000D | 1000-3000 | 0.01 |
| BH1200B | 100-1200 | 0.01 | BH4000D | 1000-4000 | 0.01 |
| BH1300B | 100-1300 | 0.01 | BH5000D | 1000-5000 | 0.01 |
上☆工
两点内径千分尺(50系列)
| 测量范围 (mm) | 分度值 (mm) | 测微头行程 (mm) | 接长管规格尺寸 (mm) |
| 50-100 | 0.01 | 13 | 13,25 |
| 50-175 | 0.01 | 13 | 13,25(2支),50 |
| 50-250 | 0.01 | 13 | 13,25,50,100 |
| 50-300 | 0.01 | 13 | 13,25,50(2支),100 |
| 50-500 | 0.01 | 13 | 13,25,50(2支),100,200 |
| 50-600 | 0.01 | 13 | 13,25,50,100,150,200 |
| 50-1000 | 0.01 | 13 | 13,25,50,100(2支),150,200,300 |
| 50-1500 | 0.01 | 13 | 13,25,50,100(2支),150,200(2支),300(2支) |
两点内径千分尺(100系列)
| 测量范围 (mm) | 分度值 (mm) | 测微头行程 (mm) | 接长管规格尺寸 (mm) |
| 100-200 | 0.01 | 25 | 25,50 |
| 100-300 | 0.01 | 25 | 25,50,100 |
| 100-400 | 0.01 | 25 | 25,50,100(2支) |
| 100-500 | 0.01 | 25 | 25,50,100,200 |
| 100-800 | 0.01 | 25 | 25,50,100(2支),200(2支) |
| 100-900 | 0.01 | 25 | 25,50,100,200,400 |
| 100-1000 | 0.01 | 25 | 25,50,100(2支),200,400 |
| 100-1200 | 0.01 | 25 | 25,50,100(2支),200(2支),400 |
| 100-1300 | 0.01 | 25 | 25,50,100,200,400(2支) |
| 100-1400 | 0.01 | 25 | 25,50,100(2支),200,400(2支) |
| 100-1500 | 0.01 | 25 | 25,50,100,200(2支),400(2支) |
| 100-1600 | 0.01 | 25 | 25,50,100(2支),200(2支),400(2支) |
| 100-1800 | 0.01 | 25 | 25,50,100(2支),200,400(3支) |
| 100-2000 | 0.01 | 25 | 25,50,100(2支),200(2支),400(3支) |
上☆工
两点内径千分尺(150系列)
| 测量范围 (mm) | 分度值 (mm) | 测微头行程 (mm) | 接长管规格尺寸 (mm) |
| 150-1400 | 0.01 | 25 | 25,50(2支),100,200,400(2支) |
| 150-2000 | 0.01 | 25 | 25,50(2支),100,200(2支),400(3支) |
| 150-2100 | 0.01 | 25 | 25,50(2支),100(2支),200(2支),400(3支) |
两点内径千分尺(300系列)
| 测量范围 (mm) | 分度值 (mm) | 测微头行程 (mm) | 接长管规格尺寸 (mm) |
| 300-500 | 0.01 | 25 | 25,50,100 |
| 300-800 | 0.01 | 25 | 25,50,100(2支),200 |
| 300-1300 | 0.01 | 25 | 25,50,100,200(2支),400 |
| 300-1600 | 0.01 | 25 | 25,50,100(2支),200,400(2支) |
| 300-2000 | 0.01 | 25 | 25,50,100(2支),200,400(3支) |
两点内径千分尺(1000系列)
| 测量范围 (mm) | 分度值 (mm) | 测微头行程 (mm) | 接长管规格尺寸 (mm) |
| 1000-1500 | 0.01 | 50 | 50,100(2支),200 |
| 1000-3000 | 0.01 | 50 | 50,100(2支),200,500,1000 |
| 1000-4000 | 0.01 | 50 | 50,100(2支),200,500,1000(2支) |
| 1000-5000 | 0.01 | 50 | 50,100(2支),200,500,1000(3支) |
上☆工。
数显深度千分尺
Digital Depth Micrometer
产品符合GB/T22092标准。
测量范围大。
高精度可换测杆。
测头精度：±0.003mm。
According with GB/T22092 respectively.
可换测杆精度:±(2+L/75)μm。
Wide measuring range.
Precision interchangeable anvils.
Micrometer head accuracy:±0.003mm.
Interchangeable anvil accuring:±(2+L/75)μm.
L=Maximum measuring length(mm).
L=最大测量长度(mm)。
IP54 protection degree.
IP54防护等级。
| 产品编号 Cat. No | 测量范围 Range(mm/in) | 允许误差 Error(mm) | 分辨力 Resolution(mm) | L (mm) |
| TC025A | 0-25/0-1 | 0.004 | 0.001/0.0001 | 63 |
| TC050A | 0-50/0-2 | 0.005 | 0.001/0.0001 | 100 |
| TC075A | 0-75/0-3 | 0.006 | 0.001/0.0001 | 100 |
| TC100A | 0-100/0-4 | 0.007 | 0.001/0.0001 | 100 |
| TC150A | 0-150/0-6 | 0.008 | 0.001/0.0001 | 100 |
| TC200A | 0-200/0-8 | 0.009 | 0.001/0.0001 | 100 |
| TC300A | 0-300/0-12 | 0.010 | 0.001/0.0001 | 100 |
深度千分尺
Depth Micrometer
产品符合GB/T1218标准。
测量范围大，可根据测量范围选用不同的测杆。
可换测杆精度高，更换测杆时不需重新对零位。
具有测力装置，使测量面与被测工件接触时，保持稳定的测量力。
具有千分螺丝锁紧装置。
| 产品编号 Cat. No | 测量范围 Range(mm) | 允许误差 Error(mm) | 分度值 Reading(mm) | L (mm) |
| BC025A | 0-25 | 0.004 | 0.01 | 63 |
| BC050A | 0-50 | 0.005 | 0.01 | 100 |
| BC075A | 0-75 | 0.006 | 0.01 | 100 |
| BC100A | 0-100 | 0.007 | 0.01 | 100 |
| BC150A | 0-150 | 0.008 | 0.01 | 100 |
| BC200A | 0-200 | 0.009 | 0.01 | 100 |
| BC300A | 0-300 | 0.010 | 0.01 | 100 |
数显三爪内径千分尺
Digital Inside Micrometer With Three-Point Contact
产品符合GB/T22093标准。
大屏幕液晶显示。
适用于盲孔和通孔的精密测量。
具有预调、调零、数据保持和公英制转换等功能。
配校对环规(100mm以下)。
IP65防护等级。
According with GB/T22093 respectively.
Big screen display.
For blind hole and through hole meastring.
Functions as preset, set zero, keep date,
metic-inch conversion, etc.
With set ring(under 100mm).
IP65 proteceion degree.
| 产品编号 Cat. No | 测量范围 Range(mm) | 允许误差 Error(mm) | 分辨力 Resolution(mm) | L (mm) | $\overset { \mathsf { A } } { ( \mathsf { m m } ) }$ | 接长杆 Extesion rod | 环规 Ring Gauge |
| TI008A | 6-8 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| TI010A | 8-10 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| TI012A | 10-12 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| TI016A | 12-16 | 0.004 | 0.001 | 80 | 0.5 | 150 | 有 |
| TI020A | 16-20 | 0.004 | 0.001 | 80 | 0.5 | 150 | 有 |
| TI025A | 20-25 | 0.004 | 0.001 | 90 | 0.5 | 150 | 有 |
| TI030A | 25-30 | 0.004 | 0.001 | 90 | 0.5 | 150 | 有 |
| TI040A | 30-40 | 0.004 | 0.001 | 97 | 0.5 | 150 | 有 |
| TI050A | 40-50 | 0.005 | 0.001 | 97 | 0.5 | 150 | 有 |
| TI063A | 50-63 | 0.005 | 0.001 | 114 | 0.5 | 150 | 有 |
| TI075A | 62-75 | 0.005 | 0.001 | 114 | 0.5 | 150 | 有 |
| TI088A | 75-88 | 0.005 | 0.001 | 114 | 0.5 | 150 | 有 |
| TI100A | 87-100 | 0.005 | 0.001 | 114 | 0.5 | 150 | 有 |
| TI125A | 100-125 | 0.005 | 0.001 | 150 | 0.5 | 150 | - |
| TI150A | 125-150 | 0.005 | 0.001 | 150 | 0.5 | 150 | |
| TI175A | 150-175 | 0.005 | 0.001 | 150 | 0.5 | 150 | |
| TI200A | 175-200 | 0.005 | 0.001 | 150 | 0.5 | 150 | |
| TI225A | 200-225 | 0.007 | 0.001 | 150 | 0.5 | 150 | |
| TI250A | 225-250 | 0.007 | 0.001 | 150 | 0.5 | 150 | |
| TI275A | 250-275 | 0.007 | 0.001 | 150 | 0.5 | 150 | |
| TI300A | 275-300 | 0.007 | 0.001 | 150 | 0.5 | 150 |
上☆工。
三爪内径千分尺
Inside Micrometer With Three-Point Contact
产品符合GB/T6314标准。
适用于盲孔和通孔的精密测量。
配校对环规(100mm以下)。 According with GB/T6314 respectively.
For blind hole and through hole meastring.
With set ring(under 100mm).
| 产品编号 Cat. No | 测量范围 Range(mm) | 允许误差 Error(mm) | 分度值 Reading(mm) | L (mm) | A (mm) | 接长杆 Extesion rod | 环规 Ring Gauge |
| BI008A | 6-8 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| BI010A | 8-10 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| BI012A | 10-12 | 0.004 | 0.001 | 54.5 | 1.5 | 100 | 有 |
| BI016A | 12-16 | 0.004 | 0.005 | 80 | 0.5 | 150 | 有 |
| BI020A | 16-20 | 0.004 | 0.005 | 80 | 0.5 | 150 | 有 |
| BI025A | 20-25 | 0.004 | 0.005 | 90 | 0.5 | 150 | 有 |
| BI030A | 25-30 | 0.004 | 0.005 | 90 | 0.5 | 150 | 有 |
| BI040A | 30-40 | 0.004 | 0.005 | 97 | 0.5 | 150 | 有 |
| BI050A | 40-50 | 0.005 | 0.005 | 97 | 0.5 | 150 | 有 |
| BI063A | 50-63 | 0.005 | 0.005 | 114 | 0.5 | 150 | 有 |
| BI075A | 62-75 | 0.005 | 0.005 | 114 | 0.5 | 150 | 有 |
| BI088A | 75-88 | 0.005 | 0.005 | 114 | 0.5 | 150 | 有 |
| BI100A | 87-100 | 0.005 | 0.005 | 114 | 0.5 | 150 | 有 |
| BI125A | 100-125 | 0.005 | 0.005 | 145 | 0.5 | 150 | - |
| BI150A | 125-150 | 0.005 | 0.005 | 145 | 0.5 | 150 | - |
| BI175A | 150-175 | 0.005 | 0.005 | 145 | 0.5 | 150 | 一 |
| BI200A | 175-200 | 0.005 | 0.005 | 145 | 0.5 | 150 | |
| BI225A | 200-225 | 0.007 | 0.005 | 145 | 0.5 | 150 | |
| BI250A | 225-250 | 0.007 | 0.005 | 145 | 0.5 | 150 | 一 |
| BI275A | 250-275 | 0.007 | 0.005 | 145 | 0.5 | 150 | |
| BI300A | 275-300 | 0.007 | 0.005 | 145 | 0.5 | 150 |
S.G.
数显三爪内径千分尺(套装)
Digital Inside Micrometer With Three-Point Contact
产品符合GB/T22093标准。
According with GB/T22093 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 件 Piece | 配环规数 Ring Gauge |
| TI012T | 6-12 | 3 | 有 |
| TI020T | 12-20 | 2 | 有 |
| TI050T | 20-50 | 4 | 有 |
| TI100T | 50-100 | 4 | 有 |
三爪内径千分尺(套装)
Inside Micrometer With Three-Point Contact
产品符合GB/T6314标准。
According with GB/T6314 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 件 Piece | 配环规数 Ring Gauge |
| BI012T | 6-12 | 3 | 有 |
| BI020T | 12-20 | 2 | 有 |
| BI050T | 20-50 | 4 | 有 |
| BI100T | 50-100 | 4 | 有 |
上☆工
平头测微头
Flat Head Micrometer
产品符合JB/T10033标准。
According with JB/T10033 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| SGQC-1 | 0-6.5 | 0.01 |
| SGQC-2 | 0-13 | 0.01 |
| SGQC-3 | 0-25 | 0.01 |
圆头测微头
Round Head Micrometer
产品符合JB/T10033标准。
According with JB/T10033 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| SGQC-4 | 0-6.5 | 0.01 |
| SGQC-5 | 0-13 | 0.01 |
| SGQC-6 | 0-25 | 0.01 |
平头带螺纹测微头
Flat Belt Screw Micrometer Head产品符合JB/T10033标准。
According with JB/T10033 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| SGQC-7 | 0-6.5 | 0.01 |
| SGQC-8 | 0-13 | 0.01 |
| SGQC-9 | 0-25 | 0.01 |
SGD
圆头带螺纹测微头
Round Belt Screw Micrometer Head
产品符合JB/T10033标准。
According with JB/T10033 respectively.
| 产品编号 Cat. No | 测量范围 Range(mm) | 分度值 Reading(mm) |
| SGQC-10 | 0-6.5 | 0.01 |
| SGQC-11 | 0-13 | 0.01 |
| SGQC-12 | 0-25 | 0.01 |
千分尺座
Micrometer Stand
| 产品编号 规格mm Cat. No Specifications |
| MS-1 |
 |
V形磁座
V-shape Magnetic Base
| 产品编号 Cat. No | 规格kg Specifications | 座体尺寸 The Size |
| MV-7K2 | 60 | 70×60×73 |
| MV-12K2 | 100 | 100×70×95 |
04-1螺纹中径比较仪 Thread Pitch Diameter Comparator
04-2 米制螺纹塞规 Metric Thread Plug Gauge
04-21 米制螺纹环规Metric Thread Ring Gauge
04-39 螺纹及螺纹量规小常识 Basic Knowledge of Threads and Thread Gauges
04-43 环塞规常见知识问答 FAQ on Ring and Plug Gauges
上☆工
上☆工。
螺纹中径比较仪
Thread pitch diameter comparator
采用比较测量法，更换测头即可轻松应对多种螺纹中径测量，专为大批量质检场景而生
极致人体工学，便携手持设计，重心布局合理，操作灵活自如
凝聚多年研发与改进心血，测量精度稳定，使用寿命长久
标配支持三槽丝锥测量，可通过更换托架，兼容五槽、七槽等丝锥
产品编号 Cat. No
测量范围 Range(mm/in)
允许误差Error(mm/in)
分辨力Resolution(mm/in)
84650-001
M3\~M16
附带GB1-03-42百分表适用于三槽丝锥测量
螺纹中径比较仪配套测头
| 测头编号 | 产品编号 | 螺距 (mm) | 牙型角 |
| 1# | 84650-001/53 | P 0.4~0.5 | 60° |
| 2# | 84650-001/54 | P 0.6~0.8 | 60° |
| 3# | 84650-001/55 | P1~1.5 | 60° |
| 4# | 84650-001/56 | P1.75~2.5 | 60° |
| 可选配 | |||
| 5# | 84650-001/57 | P3~4 | 60° |
| 6# | 84650-001/58 | P4.5~6 | 60° |
| 下测杆架可选购 测头编号 |
| 84650-001/50 五槽 |
| 84650-001/51 七槽 |
| 84650-001/52 十一槽 |
注:1.需要多槽丝锥测量需增购对应下测杆架
2.超过螺距范围需增购对应测头
3.可定制各种英制螺纹测头
4.可更换各类指示表
普通螺纹塞规
General Purpose Screw Thread Gauge
普通螺纹塞规A形(M2～M3)
普通螺纹塞规B形(>M3～M6)
普通螺纹塞规C形(>M3～M6)
执行标准 Standard：GB/T10920
材料 Material:GCr15
普通螺纹环规 A形(M1～M120)
普通螺纹塞规D形(>M50～M100)
普通螺纹环规 B形(M121～M180)
普通螺纹塞规E形(>M6～M100)
通端(T)规为完整牙型检验时应能完全旋合通过;止端(Z)规为截短牙型，检验时旋合量不得超过两个螺距。只有量规本身合格且通止规检验结果均符合上述规定，方可判定产品内、外螺纹为合格。
普通螺纹塞规简介:
普通螺纹量规规专用于检验符合GB/T192～196及GB/T197系列标准的普通内、外螺纹。
检验工作须在(20±1)℃的标准环境温度下进行，并确保测量力为零。
普通螺纹量规规检测采用测长仪配合三针法检定螺纹单一中径。
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
M2～M3
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 |
| M2 | × 0.4 | 6H | 2.0150 | 1.7505 | 1.5670 | 6.5 |
| M2 | x 0.25 | 5H | 2.0090 | 1.8435 | 1.7290 | 6.5 |
| M2.2 | x 0.45 | 6H | 2.2150 | 1.9185 | 1.7130 | 6.5 |
| M2.2 | x 0.25 | 5H | 2.2090 | 2.0435 | 1.9290 | 6.5 |
| M2.5 | x 0.45 | 6H | 2.5150 | 2.2185 | 2.0130 | 6.5 |
| M2.5 | x 0.35 | 6H | 2.5150 | 2.2835 | 2.1210 | 6.5 |
| M3 | x 0.5 | 6H | 3.0150 | 2.6855 | 2.4590 | 6.5 |
| M3 | x 0.35 | 6H | 3.0150 | 2.7835 | 2.6210 | 6.5 |
S.G
止端 Z
M2〜M3
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 1.9235 | 1.8390 | 1.5790 | 5.0 | 62.5 | M2 | 0.4 X | |
| 1.9585 | 1.9050 | 1.7750 | 5.0 | 62.5 | M2 X | 0.25 | |
| 2.1065 | 2.0120 | 1.7130 | 5.0 | 62.5 | M2.2 X | 0.45 | |
| 2.1585 | 2.1050 | 1.9750 | 5.0 | 62.5 | M2.2 X | 0.25 | |
| 2.4065 | 2.3120 | 2.0130 | 5.0 | 62.5 | M2.5 X | 0.45 | |
| 2.4415 | 2.3670 | 2.1500 | 5.0 | 62.5 | M2.5 X | 0.35 | |
| 2.8885 | 2.7840 | 2.4590 | 5.0 | 62.5 | M3 X | 0.5 | |
| 2.9465 | 2.8720 | 2.6550 | 5.0 | 62.5 | M3 X | 0.35 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M3\~M6
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 L1 |
| M3.5 | X 0.6 | 6H | 3.5150 | 3.1205 2.8500 | 6.0 |
| M3.5 x 0.35 | 6H | 3.5150 | 3.2835 | 3.1210 | 6.0 |
| M4 × 0.7 | 6H | 4.0150 | 3.5555 | 3.2420 | 6.0 |
| M4 x 0.5 | 6H | 4.0150 | 3.6855 | 3.4590 | 6.0 |
| M4.5 x 0.75 | 6H | 4.5150 | 4.0235 | 3.6880 | 6.0 |
| M4.5 x 0.5 | 6H | 4.5150 | 4.1855 | 3.9590 | 6.0 |
| M5 x 0.8 | 6H | 5.0150 | 4.4905 | 4.1340 | 8.0 |
| M5 x 0.5 | 6H | 5.0150 | 4.6855 | 4.4590 | 6.0 |
| M5.5 × 0.5 | 6H | 5.5150 | 5.1855 | 4.9590 | 6.0 |
| M6 x 1 | 6H | 6.0230 | 5.3675 | 4.9170 | 8.0 |
| M6 | x 0.75 | 6H | 6.0230 | 5.5305 5.1880 | 6.0 |
| M6 | x 0.5 | 6H | 6.0150 | 5.6855 | 5.4590 6.0 |
S.G.
止端 Z
>M3\~M6
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 | |
| 3.3555 | 3.2310 | 2.8500 | 4.5 | 70.5 | M3.5 | X | 0.6 | |
| 3.4465 | 3.3720 | 3.1550 | 4.5 | 70.5 | M3.5 | X | 0.35 | |
| 3.8165 | 3.6720 | 3.2420 | 4.5 | 70.5 | M4 | X | 0.7 | |
| 3.8885 | 3.7840 | 3.4590 | 4.5 | 70.5 | M4 | X | 0.5 | |
| 4.2945 | 4.1400 | 3.6880 | 4.5 | 70.5 | M4.5 | X | 0.75 | |
| 4.3885 | 4.2840 | 3.9590 | 4.5 | 70.5 | M4.5 | X | 0.5 | |
| 4.7785 | 4.6140 | 4.1340 | 6.0 | 74 | M5 | X | 0.8 | |
| 4.8885 | 4.7840 | 4.4590 | 4.5 | 70.5 | M5 | X | 0.5 | |
| 5.3885 | 5.2840 | 4.9590 | 4.5 | 70.5 | M5.5 | X | 0.5 | |
| 5.7165 | 5.5110 | 4.9170 | 6.0 | 74 | M6 | X | 1 | |
| 5.8115 | 5.6560 | 5.1880 | 4.5 | 70.5 | M6 | X | 0.75 | |
| 5.9005 | 5.7960 | 5.4590 | 4.5 | 70.5 | M6 | X | 0.5 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M6\~M50
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 |
| M7 | x 1 | 6H | 7.0230 | 6.3675 | 5.9170 | 8.0 |
| M7 | x 0.75 | 6H | 7.0230 | 6.5305 | 6.1880 | 7.0 |
| M8 | x 1.25 | 6H | 8.0230 | 7.2055 | 6.6470 | 12.0 |
| M8 | x 1 | 6H | 8.0230 | 7.3675 | 6.9170 | 8.0 |
| M8 | x 0.75 | 6H | 8.0230 | 7.5305 | 7.1880 | 7.0 |
| M9 | x 1.25 | 6H | 9.0230 | 8.2055 | 7.6470 | 12.0 |
| M9 | X 1 | 6H | 9.0230 | 8.3675 | 7.9170 | 8.0 |
| M9 | x 0.75 | 6H | 9.0230 | 8.5305 | 8.1880 | 7.0 |
| M10 | x 1.5 | 6H | 10.0230 | 9.0435 | 8.3760 | 12.0 |
| M10 | x 1.25 | 6H | 10.0230 | 9.2055 | 8.6470 | 12.0 |
| M10 | x 1 | 6H | 10.0230 | 9.3675 | 8.9170 | 8.0 |
| M10 | x 0.75 | 6H | 10.0230 | 9.5305 | 9.1880 | 7.0 |
| M11 | x 1.5 | 6H | 11.0230 | 10.0435 | 9.3760 | 12.0 |
| M11 | x 1 | 6H | 11.0230 | 10.3675 | 9.9170 | 8.0 |
| M11 | x 0.75 | 6H | 11.0230 | 10.5305 | 10.1880 | 8.0 |
| M12 | x 1.75 | 6H | 12.0230 | 10.8805 | 10.1060 | 16.0 |
| M12 | x 1.5 | 6H | 12.0230 | 11.0435 | 10.3760 | 12.0 |
| M12 | x 1.25 | 6H | 12.0236 | 11.2055 | 10.6470 | 12.0 |
| M12 | x 1 | 6H | 12.0230 | 11.3675 | 10.9170 | 8.0 |
| M12 | x 0.75 | 6H | 12.0230 | 11.5305 | 11.1880 | 8.0 |
| M14 x 2 | 6H | 14.0300 | 12.7240 | 11.8350 | 16.0 | |
| M14 | x 1.5 | 6H | 14.0230 | 13.0435 | 12.3760 | 12.0 |
| M14 | x 1.25 | 6H | 14.0230 | 13.2055 | 12.6470 | 12.0 |
| M14 x 1 | 6H | 14.0230 | 13.3675 | 12.9170 | 8.0 |
止端 Z
>M6\~M50
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 6.7165 | 6.5110 | 5.9170 | 6.0 | 84 | M7 | X 1 | |
| 6.8115 | 6.6560 | 6.1880 | 6.0 | 83 | M7 | 0.75 X | |
| 7.6145 | 7.3590 | 6.6470 | 8.0 | 90 | M8 X | 1.25 | |
| 7.7165 | 7.5110 | 6.9170 | 6.0 | 84 | M8 X | 1 | |
| 7.8115 | 7.6560 | 7.1880 | 6.0 | 83 | M8 X | 0.75 | |
| 8.6145 | 8.3590 | 7.6470 | 8.0 | 90 | M9 X | 1.25 | |
| 8.7165 | 8.5110 | 7.9170 | 6.0 | 84 | M9 X | 1 | |
| 8.8115 | 8.6560 | 8.1880 | 6.0 | 83 | M9 X | 0.75 | |
| 9.5225 | 9.2170 | 8.3760 | 8.0 | 90 | M10 X | 1.5 | |
| 9.6145 | 9.3590 | 8.6470 | 8.0 | 90 | M10 X | 1.25 | |
| 9.7165 | 9.5110 | 8.9170 | 6.0 | 84 | M10 X | 1 | |
| 9.8115 | 9.6560 | 9.1880 | 6.0 | 83 | M10 X | 0.75 | |
| 10.5225 | 10.2170 | 9.3760 | 8.0 | 97 | M11 X | 1.5 | |
| 10.7165 | 10.5110 | 9.9170 | 6.0 | 91 | M11 X | 1 | |
| 10.8115 | 10.6560 | 10.1880 | 6.0 | 91 | M11 X | 0.75 | |
| 11.4295 | 11.0740 | 10.1060 | 10.0 | 103 | M12 X | 1.75 | |
| 11.5325 | 11.2270 | 10.3760 | 8.0 | 97 | M12 X | 1.5 | |
| 11.6345 | 11.3790 | 10.6470 | 8.0 | 97 | M12 X | 1.25 | |
| 11.7265 | 11.5210 | 10.9170 | 6.0 | 91 | M12 X | 1 | |
| 11.8195 | 11.6640 | 11.1880 | 6.0 | 91 | M12 X | 0.75 | |
| 13.3340 | 12.9270 | 11.8350 | 10.0 | 103 | M14 X | 2 | |
| 13.5235 | 13.2270 | 12.3760 | 8.0 | 97 | M14 X | 1.5 | |
| 13.6345 | 13.3790 | 12.6470 | 8.0 | 97 | M14 X | 1.25 | |
| 13.7265 | 13.5210 | 12.9170 | 6.0 | 91 | M14 X | 1 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M6\~M50
| 规格 | 螺距P | 精度 | 大径 中径 | 小径 | L1 |
| M14 | x 0.75 | 6H | 14.0230 | 13.5305 13.1880 | 8.0 |
| M15 x 1.5 | 6H | 15.0230 14.0435 | 13.3760 | 14.0 | |
| M15 x 1 | 6H | 15.0230 14.3675 | 13.9170 | 10.0 | |
| M16 ｘ 2 | 6H | 16.0300 14.7240 | 13.8350 | 16.0 | |
| M16 × 1.5 | 6H | 16.0230 | 15.0435 14.7360 | 14.0 | |
| M16 x 1 | 6H | 16.0230 15.3675 | 14.9170 | 10.0 | |
| M17 × 1.5 | 6H | 17.0230 | 16.0435 15.3760 | 14.0 | |
| M17 ｘ 1 | 6H | 17.0230 | 16.3675 15.9170 | 10.0 | |
| M18 × 2.5 | 6H | 18.0300 | 16.3990 15.2940 | 20.0 | |
| M18 ｘ 2 | 6H | 18.0300 | 16.7240 15.8350 | 16.0 | |
| M18 x 1.5 | 6H | 18.0230 | 17.0435 16.3760 | 14.0 | |
| M18 ｘ 1 | 6H | 18.0230 | 17.3675 16.9170 | 10.0 | |
| M20 x 2.5 | 6H | 20.0300 | 18.3990 17.2940 | 20.0 | |
| M20 x 2 | 6H | 20.0300 | 18.7240 17.8350 | 16.0 | |
| M20 x 1.5 | 6H | 20.0230 | 19.0435 18.3760 | 14.0 | |
| M20 x 1 | 6H | 23.0230 | 19.3675 18.9170 | 12.0 | |
| M22 | x 2.5 | 6H | 22.0300 | 20.3990 19.2940 | 20.0 |
| M22 ｘ 2 | 6H | 22.0300 | 20.7240 19.8350 | 16.0 | |
| M22 x 1.5 | 6H | 22.0230 | 21.0435 20.3760 | 14.0 | |
| M22 x 1 | 6H | 22.0230 21.3675 | 20.9170 | 12.0 | |
| M24 X 3 | 6H | 24.0300 | 22.0740 20.7520 | 24.0 | |
| M24 ｘ 2 | 6H | 24.0300 | 22.7240 21.8350 | 16.0 | |
| M24 | x 1.5 | 6H | 24.0230 | 23.0435 22.3760 | 14.0 |
| M24 x 1 | 6H | 24.0230 | 23.3675 22.9170 | 12.0 |
S.
止端 Z
>M6\~M50
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 13.8195 | 13.6640 | 13.1880 | 6.0 | 91 | M14 | 0.75 X | |
| 14.5325 | 14.2270 | 13.3760 | 8.0 | 112 | M15 | 1.5 X | |
| 14.7265 | 14.5210 | 13.9170 | 6.0 | 106 | M15 | X 1 | |
| 15.3340 | 14.9270 | 13.8350 | 10.0 | 116 | M16 | X 2 | |
| 15.5325 | 15.2270 | 14.3760 | 8.0 | 112 | M16 | X 1.5 | |
| 15.7265 | 15.5210 | 14.9170 | 6.0 | 106 | M16 | X 1 | |
| 16.5325 | 16.2270 | 15.3760 | 8.0 | 112 | M17 | 1.5 X | |
| 16.7265 | 16.5210 | 15.9170 | 6.0 | 106 | M17 | X 1 | |
| 17.1210 | 16.6140 | 15.2940 | 14.0 | 124 | M18 | 2.5 X | |
| 17.3340 | 16.9270 | 15.8350 | 10.0 | 116 | M18 | X 2 | |
| 17.5325 | 17.2270 | 16.3760 | 8.0 | 112 | M18 | X 1.5 | |
| 17.7265 | 17.5120 | 16.9170 | 6.0 | 106 | M18 | X 1 | |
| 19.1210 | 18.6140 | 17.2940 | 16.0 | 140 | M20 | 2.5 X | |
| 19.3340 | 18.9270 | 17.8350 | 12.0 | 132 | M20 | 2 X | |
| 19.5325 | 19.2270 | 18.3760 | 8.0 | 126 | M20 | 1.5 X | |
| 19.7265 | 19.5210 | 18.9170 | 8.0 | 124 | M20 | X 1 | |
| 21.1210 | 20.6140 | 19.2940 | 16.0 | 140 | M22 | 2.5 X | |
| 21.3340 | 20.9270 | 19.8350 | 12.0 | 132 | M22 | X 2 | |
| 21.5325 | 21.2270 | 20.3760 | 8.0 | 126 | M22 | 1.5 X | |
| 21.7265 | 21.5210 | 20.9170 | 8.0 | 124 | M22 | X 1 | |
| 22.9370 | 22.3300 | 20.7520 | 16.0 | 144 | M24 | X 3 | |
| 23.3460 | 22.9390 | 21.8350 | 12.0 | 132 | M24 | X 2 | |
| 23.5425 | 23.2370 | 22.3760 | 8.0 | 126 | M24 | 1.5 X | |
| 23.7365 | 23.5310 | 22.9170 | 8.0 | 124 | M24 | X 1 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M6\~M50
| 规格 | 螺距P | 精度 | 大径 中径 | 小径 | L1 |
| M27 3 X | 6H | 27.0300 25.0740 | 23.7520 | 24.0 | |
| M27 ｘ 2 | 6H | 27.0300 | 25.7240 | 24.8350 | 16.0 |
| M27 1.5 X | 6H | 27.0230 | 26.0435 | 25.3760 | 14.0 |
| M27 x 1 | 6H | 27.0230 | 26.3657 | 25.9170 | 14.0 |
| M30 X 3.5 | 6H | 30.0300 | 27.7500 | 26.2110 | 28.0 |
| M30 X 3 | 6H | 30.0300 | 28.0740 | 26.7520 | 24.0 |
| M30 X 2 | 6H | 30.0300 | 28.7240 | 27.8350 | 16.0 |
| M30 1.5 X | 6H | 30.0230 | 29.0435 | 28.3760 | 14.0 |
| M30 X 1 | 6H | 30.0230 | 29.3675 | 28.9170 | 14.0 |
| M33 X 3.5 | 6H | 33.0300 | 30.7500 | 29.2110 | 32.0 |
| M33 X 3 | 6H | 33.0300 | 31.0740 | 29.7520 | 24.0 |
| M33 X 2 | 6H | 33.0300 | 31.7240 | 30.8350 | 16.0 |
| M33 x 1.5 | 6H | 33.0230 | 32.0435 | 31.3760 | 14.0 |
| M36 x 4 | 6H | 36.0300 | 33.4250 | 31.6700 | 32.0 |
| M36 X 3 | 6H | 36.0300 | 34.0740 | 32.7520 | 24.0 |
| M36 ｘ 2 | 6H | 36.0300 | 34.7240 | 33.8350 | 16.0 |
| M36 1.5 X | 6H | 36.0230 | 35.0435 | 34.3760 | 14.0 |
| M39 x 4 | 6H | 39.0300 | 36.4250 | 34.0670 | 32.0 |
| M39 X 3 | 6H | 39.0300 | 37.0740 | 35.7520 | 24.0 |
| M39 ｘ 2 | 6H | 39.0300 | 37.7240 | 36.8350 | 16.0 |
| M39 1.5 X | 6H | 39.0230 | 38.0435 | 37.3760 | 14.0 |
| M42 4.5 X | 6H | 42.0300 | 39.1000 | 37.1290 | 40.0 |
| M42 4 X | 6H | 42.0300 | 39.4250 | 37.6700 | 32.0 |
| M42 x 3 | 6H | 42.0300 | 40.0740 | 38.7520 | 25.0 |
止端 Z
>M6\~M50
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 25.9370 | 25.3300 | 23.7520 | 16.0 | 144 | M27 X | 3 | |
| 26.3460 | 25.9390 | 24.8350 | 12.0 | 132 | M27 X | 2 | |
| 26.5425 | 26.2370 | 25.3760 | 10.0 | 128 | M27 X | 1.5 | |
| 26.7365 | 26.5310 | 25.9170 | 10.0 | 128 | M27 X | 1 | |
| 28.7280 | 28.0210 | 26.2110 | 18.0 | 150 | M30 X | 3.5 | |
| 28.9370 | 28.3300 | 26.7520 | 16.0 | 144 | M30 X | 3 | |
| 29.3460 | 28.9390 | 27.8350 | 12.0 | 132 | M30 X | 2 | |
| 29.5425 | 29.2370 | 28.3760 | 10.0 | 128 | M30 X | 1.5 | |
| 29.7365 | 29.5310 | 28.9170 | 10.0 | 128 | M30 X | 1 | |
| 31.7280 | 31.0210 | 29.2110 | 20.0 | 174 | M33 X | 3.5 | |
| 31.9370 | 31.3300 | 29.7520 | 16.0 | 162 | M33 X | 3 | |
| 32.3460 | 31.9390 | 30.8350 | 12.0 | 150 | M33 X | 2 | |
| 32.5425 | 32.3270 | 31.3760 | 10.0 | 146 | M33 X | 1.5 | |
| 34.5230 | 33.7160 | 31.6700 | 20.0 | 174 | M36 X | 4 | |
| 34.9370 | 34.3300 | 32.7520 | 16.0 | 162 | M36 X | 3 | |
| 35.3460 | 34.9390 | 33.8350 | 12.0 | 150 | M36 x | 2 | |
| 35.5425 | 35.2370 | 34.3760 | 10.0 | 146 | M36 X | 1.5 | |
| 37.5230 | 36.7160 | 34.0670 | 20.0 | 174 | M39 x | 4 | |
| 37.9370 | 37.3300 | 35.7520 | 16.0 | 162 | M39 x | 3 | |
| 38.3460 | 37.9390 | 36.8350 | 12.0 | 150 | M39 X | 2 | |
| 38.5425 | 38.2370 | 37.3760 | 10.0 | 146 | M39 x | 1.5 | |
| 40.3130 | 39.4060 | 37.1290 | 25.0 | 191 | M42 X | 4.5 | |
| 40.5230 | 39.7160 | 37.6700 | 25.0 | 183 | M42 X | 4 | |
| 40.9370 | 40.3300 | 38.7520 | 16.0 | 167 | M42 x | 3 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M6\~M50
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 |
| M42 X | 2 | 6H | 42.0300 | 40.7240 | 39.8350 | 16.0 |
| M42 1.5 X | 6H | 42.0230 | 41.0435 | 40.3760 | 16.0 | |
| M45 X | 4.5 | 6H | 45.0300 | 42.1000 | 40.1290 | 40.0 |
| M45 X | 4 | 6H | 45.0300 | 42.4250 | 40.6700 | 32.0 |
| M45 X | 3 | 6H | 45.0300 | 43.0740 | 41.7520 | 25.0 |
| M45 X | 2 | 6H | 45.0300 | 43.7240 | 42.8350 | 16.0 |
| M45 1.5 X | 6H | 45.0230 | 44.0435 | 43.3760 | 16.0 | |
| M48 X 5 | 6H | 48.0420 | 44.7580 | 42.5870 | 40.0 | |
| M48 X 4 | 6H | 48.0300 | 45.4250 | 43.6700 | 32.0 | |
| M48 X 3 | 6H | 48.0300 | 46.0740 | 44.7520 | 25.0 | |
| M48 X 2 | 6H | 48.0300 | 46.7240 | 45.8350 | 16.0 | |
| M48 X | 1.5 | 6H | 48.0300 | 47.0490 | 46.3760 | 16.0 |
SG
止端Z
>M6\~M50
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 41.3460 | 40.9390 | 39.8350 | 12.0 | 154 | M42 X | 2 | |
| 41.5425 | 41.2370 | 40.3760 | 12.0 | 154 | M42 X | 1.5 | |
| 43.3130 | 42.4060 | 40.1290 | 25.0 | 191 | M45 X | 4.5 | |
| 43.5230 | 42.7160 | 40.6700 | 25.0 | 183 | M45 X | 4 | |
| 43.9370 | 43.3300 | 41.7520 | 16.0 | 167 | M45 X | 3 | |
| 44.3460 | 43.9390 | 42.8350 | 12.0 | 154 | M45 X | 2 | |
| 44.5425 | 44.2370 | 43.3760 | 12.0 | 154 | M45 X | 1.5 | |
| 46.1140 | 45.1050 | 42.5870 | 25.0 | 191 | M48 X | 5 | |
| 46.5380 | 45.7310 | 43.6700 | 25.0 | 183 | M48 X | 4 | |
| 46.9520 | 46.3450 | 44.7520 | 16.0 | 167 | M48 X | 3 | |
| 47.3580 | 46.9510 | 45.8350 | 12.0 | 154 | M48 X | 2 | |
| 47.5590 | 47.2520 | 46.3760 | 12.0 | 154 | M48 X | 1.5 |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M50\~M100
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 | L |
| M52 x | 5 | 6H | 52.0420 | 48.7850 | 46.5870 | 45.0 | 141 |
| M52 X | 4 | 6H | 52.0300 | 49.4250 | 47.6700 | 32.0 | 133 |
| M52 X | 3 | 6H | 52.0300 | 50.0740 | 48.7520 | 25.0 | 126 |
| M52 X | 2 | 6H | 52.0300 | 50.7240 | 49.8350 | 18.0 | 119 |
| M52 X | 1.5 | 6H | 52.0300 | 51.0490 | 50.3760 | 18.0 | 119 |
| M56 X | 5.5 | 6H | 56.0420 | 52.4610 | 50.0460 | 45.0 | 141 |
| M56 X | 4 | 6H | 56.0300 | 53.4250 | 51.6700 | 32.0 | 133 |
| M56 X | 3 | 6H | 56.0300 | 54.0740 | 52.7520 | 25.0 | 126 |
| M56 X | 2 | 6H | 56.0300 | 54.7240 | 53.8350 | 18.0 | 119 |
| M56 X | 1.5 | 6H | 56.0300 | 55.0490 | 54.3760 | 18.0 | 119 |
| M60 X | 5.5 | 6H | 60.0420 | 56.4610 | 54.0460 | 45.0 | 141 |
| M60 X | 4 | 6H | 60.0300 | 57.4250 | 55.6700 | 32.0 | 133 |
| M60 X | 3 | 6H | 60.0300 | 58.0740 | 56.7520 | 25.0 | 126 |
| M60 X | 2 | 6H | 60.0300 | 58.7240 | 57.8350 | 18.0 | 119 |
| M60 X | 1.5 | 6H | 60.0300 | 59.0490 | 58.3760 | 18.0 | 119 |
| M64 X | 6 | 6H | 64.0420 | 60.1360 | 57.5050 | 50.0 | 151 |
| M64 X | 4 | 6H | 64.0300 | 61.4250 | 59.6700 | 35.0 | 136 |
| M64 X | 3 | 6H | 64.0300 | 62.0740 | 60.7520 | 25.0 | 126 |
| M64 X | 2 | 6H | 64.0300 | 62.7240 | 61.8350 | 18.0 | 119 |
| M64 X | 1.5 | 6H | 64.0300 | 63.0490 | 62.3760 | 18.0 | 119 |
| M68 X | 6 | 6H | 68.0420 | 64.1360 | 61.5050 | 50.0 | 151 |
| M68 X | 4 | 6H | 68.0300 | 65.4250 | 63.6700 | 35.0 | 136 |
| M68 X | 3 | 6H | 68.0300 | 66.0740 | 64.7520 | 25.0 | 126 |
| M68 X | 2 | 6H | 68.0300 | 66.7240 | 65.8350 | 18.0 | 119 |
止端 Z
>M50～M100
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 50.1140 | 49.1050 | 46.5870 | 32.0 | 133 | M52 X | 5 | o |
| 50.5380 | 49.7310 | 47.6700 | 25.0 | 126 | M52 X | 4 | o |
| 50.9520 | 50.3450 | 48.7520 | 18.0 | 119 | M52 X | 3 | o |
| 51.3580 | 50.9510 | 49.8350 | 18.0 | 119 | M52 X | 2 | o |
| 51.5590 | 51.2520 | 50.3760 | 18.0 | 119 | M52 X | 1.5 | o |
| 53.9100 | 52.8010 | 50.0460 | 32.0 | 133 | M56 X | 5.5 | o |
| 54.5380 | 53.7310 | 51.6700 | 25.0 | 126 | M56 X | 4 | o |
| 54.9520 | 54.3450 | 52.7520 | 18.0 | 119 | M56 X | 3 | o |
| 55.3580 | 54.9510 | 53.8350 | 18.0 | 119 | M56 x | 2 | o |
| 55.5590 | 55.2520 | 54.3760 | 18.0 | 119 | M56 X | 1.5 | 0 |
| 57.9100 | 56.8010 | 54.0460 | 32.0 | 133 | M60 X | 5.5 | o |
| 58.5380 | 57.7310 | 55.6700 | 25.0 | 126 | M60 X | 4 | o |
| 58.9520 | 58.3450 | 56.7520 | 18.0 | 119 | M60 x | 3 | o |
| 59.3580 | 58.9510 | 57.8350 | 18.0 | 119 | M60 X | 2 | o |
| 59.5590 | 59.2520 | 58.3760 | 18.0 | 119 | M60 X | 1.5 | o |
| 61.7050 | 60.4960 | 57.5050 | 35.0 | 136 | M64 X | 6 | o |
| 62.5380 | 61.7310 | 59.6700 | 25.0 | 126 | M64 X | 4 | o |
| 62.9520 | 62.3450 | 60.7520 | 18.0 | 119 | M64 X | 3 | o |
| 63.3580 | 62.9510 | 61.8350 | 18.0 | 119 | M64 X | 2 | o |
| 63.5590 | 63.2520 | 62.3760 | 18.0 | 119 | M64 X | 1.5 | o |
| 65.7050 | 64.4960 | 61.5050 | 35.0 | 136 | M68 x | 6 | o |
| 66.5380 | 65.7310 | 63.6700 | 25.0 | 126 | M68 X | 4 | o |
| 66.9520 | 66.3450 | 64.7520 | 18.0 | 119 | M68 X | 3 | o |
| 67.3580 | 66.9510 | 65.8350 | 18.0 | 119 | M68 X | 2 | o |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M50\~M100
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 | L |
| M68 X | 1.5 | 6H | 68.0300 | 67.0490 | 66.3760 | 18.0 | 119 |
| M72 X | 6 | 6H | 72.0420 | 68.1360 | 65.5050 | 50.0 | 151 |
| M72 X | 4 | 6H | 72.0300 | 69.4250 | 67.6700 | 35.0 | 136 |
| M72 X | 3 | 6H | 72.0300 | 70.0740 | 68.7520 | 25.0 | 126 |
| M72 X | 2 | 6H | 72.0300 | 70.7240 | 69.8350 | 18.0 | 119 |
| M72 X | 1.5 | 6H | 72.0300 | 71.0490 | 70.3760 | 18.0 | 119 |
| M76 X | 6 | 6H | 76.0420 | 72.1360 | 69.5050 | 50.0 | 151 |
| M76 X | 4 | 6H | 76.0300 | 73.4250 | 71.6700 | 35.0 | 136 |
| M76 x | 3 | 6H | 76.0300 | 74.0740 | 72.7520 | 25.0 | 126 |
| M76 X | 2 | 6H | 76.0300 | 74.7240 | 73.8350 | 18.0 | 119 |
| M76 X | 1.5 | 6H | 76.0300 | 75.0490 | 74.3760 | 18.0 | 119 |
| M80 X | 6 | 6H | 80.0420 | 76.1360 | 73.5050 | 50.0 | 151 |
| M80 X | 4 | 6H | 80.0300 | 77.4250 | 75.6700 | 35.0 | 136 |
| M80 X | 3 | 6H | 80.0300 | 78.0740 | 76.7520 | 25.0 | 126 |
| M80 X | 2 | 6H | 80.0300 | 78.7240 | 77.8350 | 18.0 | 119 |
| M80 X | 1.5 | 6H | 80.0300 | 79.0490 | 78.3760 | 18.0 | 119 |
| M85 X | 6 | 6H | 85.0420 | 81.1360 | 78.5050 | 50.0 | 151 |
| M85 X | 4 | 6H | 85.0300 | 82.4250 | 80.6700 | 35.0 | 136 |
| M85 X | 3 | 6H | 85.0300 | 83.0740 | 81.7520 | 25.0 | 126 |
| M85 X | 2 | 6H | 85.0300 | 83.7240 | 82.8350 | 18.0 | 119 |
| M85 x | 1.5 | 6H | 85.0300 | 84.0490 | 83.3760 | 18.0 | 119 |
| M90 X | 6 | 6H | 90.0420 | 86.1360 | 83.5050 | 50.0 | 151 |
| M90 X | 4 | 6H | 90.0300 | 87.4250 | 85.6700 | 35.0 | 136 |
| M90 X | 3 | 6H | 90.0300 | 88.0740 | 86.7520 | 25.0 | 126 |
止端 Z
SG.
>M50\~M100
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 67.5590 | 67.2520 | 66.3760 | 18.0 | 119 | M68 X | 1.5 | o |
| 69.7050 | 68.4960 | 65.5050 | 35.0 | 136 | M72 X | 6 | o |
| 70.5380 | 69.7310 | 67.6700 | 25.0 | 126 | M72 X | 4 | o |
| 70.9520 | 70.3450 | 68.7520 | 18.0 | 119 | M72 X | 3 | o |
| 71.3580 | 70.9510 | 69.8350 | 18.0 | 119 | M72 X | 2 | o |
| 71.5590 | 71.2520 | 70.3760 | 18.0 | 119 | M72 X | 1.5 | o |
| 73.7050 | 72.4960 | 69.5050 | 35.0 | 136 | M76 X | 6 | o |
| 74.5380 | 73.7310 | 71.6700 | 25.0 | 126 | M76 X | 4 | o |
| 74.9520 | 74.3450 | 72.7520 | 18.0 | 119 | M76 x | 3 | o |
| 75.3580 | 74.9510 | 73.8350 | 18.0 | 119 | M76 X | 2 | o |
| 75.5590 | 75.2520 | 74.3760 | 18.0 | 119 | M76 X | 1.5 | o |
| 77.7050 | 76.4960 | 73.5050 | 35.0 | 136 | M80 X | 6 | o |
| 78.5380 | 77.7310 | 75.6700 | 25.0 | 126 | M80 X | 4 | o |
| 78.9520 | 78.3450 | 76.7520 | 18.0 | 119 | M80 X | 3 | o |
| 79.3580 | 78.9510 | 77.8350 | 18.0 | 119 | M80 X | 2 | o |
| 79.5590 | 79.2520 | 78.3760 | 18.0 | 119 | M80 X | 1.5 | o |
| 82.7050 | 81.4960 | 78.5050 | 35.0 | 136 | M85 X | 6 | o |
| 83.5380 | 82.7310 | 80.6700 | 25.0 | 126 | M85 X | 4 | o |
| 83.9520 | 83.3450 | 81.7520 | 18.0 | 119 | M85 x | 3 | o |
| 84.3580 | 83.9510 | 82.8350 | 18.0 | 119 | M85 X | 2 | 0 |
| 84.5590 | 84.2520 | 83.3760 | 18.0 | 119 | M85 x | 1.5 | o |
| 87.7050 | 86.4960 | 83.5050 | 35.0 | 136 | M90 X | 6 | o |
| 88.5380 | 87.7310 | 85.6700 | 25.0 | 126 | M90 X | 4 | o |
| 88.9520 | 88.3450 | 86.7520 | 18.0 | 119 | M90 X | 3 | o |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M50～M100
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 | L |
| M90 X | 2 | 6H | 90.0300 | 88.7240 | 87.8350 | 18.0 | 119 |
| M90 X | 1.5 | 6H | 90.0300 | 89.0490 | 88.3760 | 18.0 | 119 |
| M95 X | 6 | 6H | 95.0420 | 91.1360 | 88.5050 | 50.0 | 151 |
| M95 X | 4 | 6H | 95.0420 | 92.4350 | 90.6700 | 35.0 | 136 |
| M95 X | 3 | 6H | 95.0300 | 93.0740 | 91.7520 | 25.0 | 126 |
| M95 X | 2 | 6H | 95.0300 | 93.7240 | 92.8350 | 18.0 | 119 |
| M95 X | 1.5 | 6H | 95.0300 | 94.0490 | 93.3760 | 18.0 | 119 |
| M100 X | 6 | 6H | 100.0420 | 96.1360 | 93.5050 | 50.0 | 151 |
| M100 x | 4 | 6H | 100.0420 | 97.4350 | 95.6700 | 35.0 | 136 |
| M100 X | 3 | 6H | 100.0300 | 98.0740 | 96.7520 | 25.0 | 126 |
| M100 X | 2 | 6H | 100.0300 | 98.7240 | 97.8350 | 18.0 | 119 |
| M100 X | 1.5 | 6H | 100.0300 | 99.0490 | 98.3760 | 18.0 | 119 |
止端 Z
>M50～M100
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 89.3580 | 88.9510 | 87.8350 | 18.0 | 119 | M90 X | 2 | o |
| 89.5590 | 89.2520 | 88.3760 | 18.0 | 119 | M90 X | 1.5 | o |
| 92.7300 | 91.5210 | 88.5050 | 35.0 | 136 | M95 X | 6 | o |
| 93.5640 | 92.7550 | 90.6700 | 25.0 | 126 | M95 X | 4 | o |
| 93.9720 | 93.3650 | 91.7520 | 18.0 | 119 | M95 X | 3 | o |
| 94.3720 | 93.9650 | 92.8350 | 18.0 | 119 | M95 X | 2 | o |
| 94.5710 | 94.2640 | 93.3760 | 18.0 | 119 | M95 X | 1.5 | o |
| 97.7300 | 96.5210 | 93.5050 | 35.0 | 136 | M100 X | 6 | o |
| 98.5640 | 97.7550 | 95.6700 | 25.0 | 126 | M100 x | 4 | o |
| 98.9720 | 98.3650 | 96.7520 | 18.0 | 119 | M100 X | 3 | 0 |
| 99.3720 | 98.9650 | 97.8350 | 18.0 | 119 | M100 X | 2 | o |
| 99.5710 | 99.2640 | 98.3760 | 18.0 | 119 | M100 X | 1.5 | o |
通端 T
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
>M100\~M180
| 规格 | 螺距P 精度 | 大径 | 中径 | 小径 | L1 | L |
| M105 X | 6 | 6H | 105.0420 101.1360 | 98.5050 | 50.0 | 145 |
| M105 4 X | 6H | 105.0420 | 102.4350 | 100.6700 | 35.0 | 129 |
| M105 3 X | 6H | 105.0300 | 103.0740 | 101.7520 | 25.0 | 117 |
| M105 2 X | 6H | 105.0300 | 103.7240 | 102.8350 | 18.0 | 109 |
| M110 6 X | 6H | 110.0420 | 106.1360 | 103.5050 | 50.0 | 145 |
| M110 4 X | 6H | 110.0420 | 107.4350 | 105.6700 | 35.0 | 129 |
| M110 3 X | 6H | 110.0300 | 108.0740 | 106.7520 | 25.0 | 117 |
| M110 2 X | 6H | 110.0300 | 108.7240 | 107.8350 | 18.0 | 109 |
| M115 6 X | 6H | 115.0420 | 111.1360 | 108.5050 | 50.0 | 145 |
| M115 4 X | 6H | 115.0420 | 112.4350 | 110.6700 | 35.0 | 129 |
| M115 3 X | 6H | 115.0300 | 113.0740 | 111.7520 | 25.0 | 117 |
| M115 2 X | 6H | 115.0300 | 113.7240 | 112.8350 | 18.0 | 109 |
| M120 6 X | 6H | 120.0420 | 116.1360 | 113.5050 | 50.0 | 145 |
| M120 4 X | 6H | 120.0420 | 117.4350 | 115.6700 | 35.0 | 129 |
| M120 3 X | 6H | 120.0300 | 118.0740 | 116.7520 | 25.0 | 117 |
| M120 2 X | 6H | 120.0300 | 118.7240 | 117.8350 | 18.0 | 109 |
| M125 6 X | 6H | 125.0420 | 121.1360 | 118.5050 | 56.0 | 145 |
| M125 4 X | 6H | 125.0420 | 122.4350 | 120.6700 | 40.0 | 129 |
| M125 3 X | 6H | 125.0300 | 123.0740 | 121.7520 | 28.0 | 117 |
| M125 2 X | 6H | 125.0300 | 123.7240 | 122.8350 | 20.0 | 109 |
| M130 X | 6 6H | 130.0420 | 126.1360 | 123.5050 | 56.0 | 145 |
| M130 X | 4 6H | 130.0420 | 127.4350 | 125.6700 | 40.0 | 129 |
| M130 X | 3 6H | 130.0300 | 128.0740 | 126.7520 | 28.0 | 117 |
| M130 X | 2 6H | 130.0300 | 128.7240 | 127.8350 | 20.0 | 109 |
止端 Z
>M100\~M180
SG.
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 102.7300 | 101.5210 | 98.5050 | 35.0 | 124 | M105 X | 6 | o |
| 103.5640 | 102.7550 | 100.6700 | 25.0 | 117 | M105 X | 4 | o |
| 103.9720 | 103.3650 | 101.7520 | 18.0 | 109 | M105 X | 3 | o |
| 104.3720 | 103.9650 | 102.8350 | 18.0 | 109 | M105 X | 2 | o |
| 107.7300 | 106.5210 | 103.5050 | 35.0 | 124 | M110 X | 6 | o |
| 108.5640 | 107.7550 | 105.6700 | 25.0 | 117 | M110 X | 4 | o |
| 108.9720 | 108.3650 | 106.7520 | 18.0 | 109 | M110 X | 3 | o |
| 109.3720 | 108.9650 | 107.8350 | 18.0 | 109 | M110 X | 2 | o |
| 112.7300 | 111.5210 | 108.5050 | 35.0 | 124 | M115 X | 6 | o |
| 113.5640 | 112.7550 | 110.6700 | 25.0 | 117 | M115 X | 4 | o |
| 113.9720 | 113.3650 | 111.7520 | 18.0 | 109 | M115 X | 3 | o |
| 114.3720 | 113.9650 | 112.8350 | 18.0 | 109 | M115 X | 2 | o |
| 117.7300 | 116.5210 | 113.5050 | 35.0 | 124 | M120 X | 6 | o |
| 118.5640 | 117.7550 | 115.6700 | 25.0 | 117 | M120 X | 4 | 0 |
| 118.9720 | 118.3650 | 116.7520 | 18.0 | 109 | M120 X | 3 | o |
| 119.3720 | 118.9650 | 117.8350 | 18.0 | 109 | M120 X | 2 | 0 |
| 122.7300 | 121.5210 | 118.5050 | 35.0 | 124 | M125 X | 6 | o |
| 123.5640 | 122.7550 | 120.6700 | 28.0 | 117 | M125 X | 4 | o |
| 123.9720 | 123.3650 | 121.7520 | 20.0 | 109 | M125 X | 3 | o |
| 124.3720 | 123.9650 | 122.8350 | 20.0 | 109 | M125 X | 2 | o |
| 127.7300 | 126.5210 | 123.5050 | 35.0 | 124 | M130 X | 6 | o |
| 128.5640 | 127.7550 | 125.6700 | 28.0 | 117 | M130 X | 4 | o |
| 128.9720 | 128.3650 | 126.7520 | 20.0 | 109 | M130 X | 3 | o |
| 129.3720 | 128.9650 | 127.8350 | 20.0 | 109 | M130 X | 2 | o |
通端 T
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
>M100\~M180
| 规格 | 螺距P 精度 | 大径 | 中径 | 小径 | L1 | L |
| M135 X | 6 6H | 135.0420 | 131.1360 | 128.5050 | 56.0 | 145 |
| M135 4 X | 6H | 135.0420 | 132.4350 | 130.6700 | 40.0 | 129 |
| M135 3 X | 6H | 135.0300 | 133.0740 | 131.7520 | 28.0 | 117 |
| M135 2 X | 6H | 135.0300 | 133.7240 | 132.8350 | 20.0 | 109 |
| M140 6 X | 6H | 140.0420 | 136.1360 | 133.5050 | 56.0 | 145 |
| M140 4 X | 6H | 140.0420 | 137.4350 | 135.6700 | 40.0 | 129 |
| M140 3 X | 6H | 140.0300 | 138.0740 | 136.7520 | 28.0 | 117 |
| M140 2 X | 6H | 140.0300 | 138.7240 | 137.8350 | 20.0 | 109 |
| M145 6 X | 6H | 145.0420 | 141.1360 | 138.5050 | 63.0 | 145 |
| M145 4 X | 6H | 145.0420 | 142.4350 | 140.6700 | 40.0 | 129 |
| M145 3 X | 6H | 145.0300 | 143.0740 | 141.7520 | 28.0 | 117 |
| M145 2 X | 6H | 145.0300 | 143.7240 | 142.8350 | 20.0 | 109 |
| M150 6 X | 6H | 150.0420 | 146.1360 | 143.5050 | 63.0 | 145 |
| M150 4 X | 6H | 150.0420 | 147.4350 | 145.6700 | 40.0 | 129 |
| M150 3 X | 6H | 150.0300 | 148.0740 | 146.7520 | 28.0 | 117 |
| M150 2 X | 6H | 150.0300 | 148.7240 | 147.8350 | 20.0 | 109 |
| M155 6 X | 6H | 155.0420 | 151.1360 | 148.5050 | 63.0 | 152 |
| M155 4 X | 6H | 155.0420 | 452.4350 | 150.6700 | 40.0 | 129 |
| M155 3 X | 6H | 155.0300 | 153.0740 | 151.7520 | 28.0 | 117 |
| M160 6 X | 6H | 160.0420 | 156.1360 | 153.5050 | 63.0 | 152 |
| M160 4 X | 6H | 160.0420 | 157.4350 | 155.6700 | 40.0 | 129 |
| M160 X | 3 6H | 160.0300 | 158.0740 | 156.7520 | 28.0 | 117 |
| M170 X | 6 6H | 170.0420 | 166.1360 | 163.5050 | 63.0 | 152 |
| M170 4 X | 6H | 170.0420 | 167.4350 | 165.6700 | 40.0 | 129 |
止端 Z
>M100\~M180
S
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 132.7300 | 131.5210 | 128.5050 | 35.0 | 124 | M135 | X 6 | o |
| 133.5640 | 132.7550 | 130.6700 | 28.0 | 117 | M135 X | 4 | o |
| 133.9720 | 133.3650 | 131.7520 | 20.0 | 109 | M135 X | 3 | o |
| 134.3720 | 133.9650 | 132.8350 | 20.0 | 109 | M135 X | 2 | o |
| 137.7300 | 136.5210 | 133.5050 | 35.0 | 124 | M140 X | 6 | o |
| 138.5640 | 135.7550 | 135.6700 | 28.0 | 117 | M140 X | 4 | o |
| 138.9720 | 138.3650 | 136.7520 | 20.0 | 109 | M140 X | 3 | o |
| 139.3720 | 138.9650 | 137.8350 | 20.0 | 109 | M140 X | 2 | o |
| 142.7300 | 141.5210 | 138.5050 | 35.0 | 124 | M145 X | 6 | o |
| 143.5640 | 142.7550 | 140.6700 | 28.0 | 117 | M145 X | 4 | o |
| 143.9720 | 143.3650 | 141.7520 | 20.0 | 109 | M145 X | 3 | o |
| 144.3720 | 143.9650 | 142.8350 | 20.0 | 109 | M145 X | 2 | o |
| 147.7300 | 146.5210 | 143.5050 | 35.0 | 124 | M150 X | 6 | o |
| 148.5640 | 147.7550 | 145.6700 | 28.0 | 117 | M150 X | 4 | o |
| 148.9720 | 148.3650 | 146.7520 | 20.0 | 109 | M150 X | 3 | o |
| 149.3720 | 148.9650 | 147.8350 | 20.0 | 109 | M150 X | 2 | o |
| 152.7300 | 151.5210 | 148.5050 | 35.0 | 124 | M155 X | 6 | o |
| 153.5640 | 152.7550 | 150.6700 | 28.0 | 117 | M155 X | 4 | o |
| 153.9720 | 153.3650 | 151.7520 | 20.0 | 109 | M155 X | 3 | o |
| 157.7300 | 156.5210 | 153.5050 | 35.0 | 124 | M160 X | 6 | o |
| 158.5640 | 157.7550 | 155.6700 | 28.0 | 117 | M160 X | 4 | o |
| 158.9720 | 158.3650 | 156.7520 | 20.0 | 109 | M160 X | 3 | o |
| 167.7300 | 166.5210 | 163.5050 | 35.0 | 124 | M170 X | 6 | o |
| 168.5640 | 167.7550 | 165.6700 | 30.0 | 119 | M170 X | 4 | o |
普通螺纹塞规
General Purpose Screw
Thread Plug Gauge
材料：GCr15
单位：mm
通端 T
>M100\~M180
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 | L |
| M170 X | 3 | 6H | 170.0300 | 168.0740 | 166.7520 | 32.0 | 121 |
| M180 X | 6 | 6H | 180.0420 | 176.1360 | 173.5050 | 63.0 | 152 |
| M180 X | 4 | 6H | 180.0420 | 177.4350 | 175.6700 | 40.0 | 129 |
| M180 X | 3 | 6H | 180.0300 | 178.0740 | 176.7520 | 32.0 | 121 |
SG
止端 Z
>M100\~M180
“o”为常备
“●”为半备
| 大径 | 中径 | 小径 | L2 | L | 规格 | 螺距P | 库存 |
| 168.9720 | 168.3650 | 166.7520 | 114 | M170 | X 3 | o | |
| 177.7300 | 176.5210 | 173.5050 | 124 | M180 | X 6 | 0 | |
| 178.5640 | 177.7550 | 175.6700 | 119 | M180 | X 4 | o | |
| 178.9720 | 178.3650 | 176.7520 | 114 | M180 X | 3 | o |
通端 T
普通螺纹环规
General Purpose Screw
Thread Ring Gauge
材料：GCr15
单位：mm
>M6\~M100
| 规格 | 螺距P | 精度 | 大径 | 中径 | 小径 | L1 |
| M2 X | 0.4 | 6g | 1.988 | 1.718 | 1.543 | 4 |
| M2 X | 0.25 | 6g | 1.989 | 1.817 | 1.706 | 4 |
| M2.2 x | 0.45 | 6g | 2.187 | 1.885 | 1.688 | 4 |
| M2.2 X | 0.25 | 6g | 2.189 | 2.017 | 1.906 | 4 |
| M2.5 X | 0.45 | 6g | 2.478 | 2.185 | 1.988 | 4 |
| M2.5 X | 0.35 | 6g | 2.488 | 2.251 | 2.097 | 4 |
| M3 X | 0.5 | 6g | 2.987 | 2.652 | 2.434 | 5 |
| M3 X | 0.35 | 6g | 2.987 | 2.75 | 2.597 | 5 |
| M3.5 X | 0.6 | 6g | 3.488 | 3.08 | 2.8 | 5 |
| M3.5 X | 0.35 | 6g | 3.488 | 3.251 | 3.097 | 5 |
| M4 X | 0.7 | 6g | 3.987 | 3.514 | 3.213 | 6 |
| M4 X | 0.5 | 6g | 3.987 | 3.652 | 3.434 | 5 |
| M4.5 X | 0.75 | 6g | 4.487 | 3.982 | 3.659 | 6 |
| M4.5 | x 0.5 | 6g | 4.487 | 4.152 | 3.934 | 5 |
| M5 X | 0.8 | 6g | 4.985 | 4.447 | 4.103 | 6 |
| M5 X | 0.5 | 6g | 4.987 | 4.652 | 4.434 | 5 |
| M6 | 1 X | 6g | 5.983 | 5.315 | 4.884 | 8 |
| M6 | 0.75 X | 6g | 5.987 | 5.482 | 5.159 | 8 |
| M7 | 1 X | 6g | 6.983 | 6.315 | 5.884 | 8 |
| M7 | 0.75 X | 6g | 6.987 | 6.482 | 6.159 | 8 |
| M8 | 1.25 X | 6g | 7.981 | 7.151 | 6.612 | 10 |
| M8 | 1 X | 6g | 7.983 | 7.315 | 6.884 | 8 |
| M8 | 0.75 X | 6g | 7.987 | 7.482 | 7.159 | 8 |
| M9 | 1.25 X | 6g | 8.981 | 8.151 | 7.612 | 10 |
