JBANG集团产品目录 - 电子画册在线预览、各类电子画册在线制作-云展网平台


GTQ2Z-250			GTQ2Z-400		GTQ2Z-630

250			400			630
AC 400/50Hz			AC400/50Hz			AC 400/50Hz

140,160,180,200,225,250			250,315,350,400		400,500,630
800			800		800
8			8		8
35			35		35
73.5			73.5		73.5
■			■		■
AC-33iB CB Ievel ATSE			AC-33iB		AC-33iB CB level ATSE
7000			CB Ievel ATSE		4000
1000		4000 1000			1000
60		60			60
GTM1-250M					GTM1-630M
Fixed/Front panel wiring		GTM1-400M Fixed/Front panel wiring			Fixed/Front panel wiring
A B		A	B		A B
218	218	320		320
					340	340
512	390	640		527	735	623
160	160	243		243	243	243
198	198	300		300	320	320
412	295	580		466	676	564
7	7	7	7	7		7

GTT6

SeriesAutomatic transfer switch equipment (PC grade)

Selection instructions

Notes:

① :700A and above products are Back-panel wiring;

② :700A and above only have split type;
③ :Onlysplit typewith communication function;Theopening size of the split type controller is:Length (165) x Width (90),unit: mm;
④ :Thedefault configurationlength for the data (connection)cableof the split type controler is2meters.

Product features

·ComplieswiththestandardGB/1404811Lowvoltageswitchgearandcontrolequipment-Part6-1:Mulifunctionalelectricatransfer switchgear";
·Usedforprimaryandsomesecondaryloads,tocompleteadualcircuitpowersupplysystemandensurethereliabityofpowersupplyfor important users;
·Widelyusedimreeietadcoatigicadaltortsfietio Important placessuchasmetallurgy,chemicalindustrytextiles,and petroleum thatdonotallow poweroutages;
·The current ranges from 20A to 1600A.

Model specifications

Model	Frame level	Ratedcurrent(A)
		20 32	40 50	63	80	100	125	160	200	225	250	315	350	400	500	630	2501600
GTT6-63	63A
GTT6-125	125A
GTT6-250	250A
GTT6-630	630A
GTT6-800	800A
GTT6-1250	1250A
GTT6-1600	1600A

Technicalparameters

Model GTT6-63 GTT6-125 GTT6-250
GB/T14048.11
IEC60947-6-1
Rated working voltage Ue(V) AC 400/50Hz AC 400/50Hz
Poles 3P/4P
Rated current le（A) 20,32,40,50,63 80,100,125 160,200,225,250
Rated insulation voltage Ui(V) 800 800
Rated impulse withstand Uimp(kv) 6(Main circuit),2.5(Control circuit) 6(Maincircuit),2.5(Controlcircuit)
voltage
Ratedtortcircut aking Icm(kA) 30 30
Ratedshort-time withstand Icw(kA/ms) 15/30 15/30
currentand energization time
Bothspfto ■ ■
Usagecategory AC33iA AC33iA
Electrical levelandTSE type PC level ATSE PC level ATSE 220VAC/DC 1.5 2 2.5
Operating current （A) 110VAC/DC 3 4 4 220VAC/DC 0.5 0.5 0.5
Tripping current （A) 110VAC/DC 1 1 1
Body switch transfer time (ms) 一 \le 7 5 （20号一 \le 7 5 \le 7 5 2
Powerdeviationand frequency (V) Underyoltage 170\~200 170\~200
variation opositely) （ ± 1 0 % （20 ± 1 0 %
Contact transfer time 10ms\~500ms 10ms\~500ms
Transfer action time 100ms\~900ms 100ms\~900ms
Return transfer time range (100ms\~900ms)+Delay Time (100ms\~900ms)+Delay Time
Power outage timerange (10ms\~500ms)+Delay Time (100ms\~500ms)+DelayTime Camupn to 0\~99 0\~99
Delay Time (s) Bommonuse 0\~99 0\~99 Mechanical life 15000 15000
Service life (Times) Electricallife 6000 6000
Number of operation cycles (times/hour) 120 120
Maincontact working position\* Three-stage type Three-stage type
Wiring method Front panel Front panel
Structuralcategory A:Integrated B:Integrated A B A B A B Width (W) 190 195 195 M
Overall dimensions (mm) Length (L)(3/4) 268/291225/247291/321247/277310/345 262/297 四国 Height (H) 112 112 112 112 112 112

				GTT6-800
	GTT6-630			GTT6-1250	GTT6-1600

AC 400/50Hz AC400/50Hz

	315,350,400,500,630			700.800 1000,1250 800
	800
	8(Main circuit),2.5(Control circuit)			8(Main circuit),2.5(Controlcircuit）)
	67.5			132
	32/60		60/60
	■		■
	AC-33iA			AC-33iA
	PC level ATSE		PC level ATSE
	3			4
	6		3 6	8 1	4 8
	0.7	1			1
	1.5		2	2	2
	≤80		≤130	≤140	≤140
	170~200		170~200
	±10%		±10%
	10ms~500ms		10ms~500ms
	100ms~900ms		100ms~900ms
	(100ms~900ms)+Delay Time		(100ms~900ms)+Delay Time
	(100ms~500ms)+Delay Time		(100ms~500ms)+Delay Time
	0~99		0~99
	0~99		0~99
	15000		10000
	5000		3000
120			60
	Three-stage type		Three-stage type
	Front panel		Back panel
		B	B	B	B
	A 290	290	390	390	390
	391/453	351/413	405/470	450/530	510/610

	132	132	210	250	255

GTH2

SeriesLoad isolationswitch

Selectioninstructions

Product features

·Has high dynamic and thermal stability;
·Ratedvoltage400V,suitable forAC50Hzor60Hz;
·Widely usedin industrialand mining enterprises,high-risebuildings,commercialand householdsettings;
·Complieswith GB/T14048.3and IEC60947-3standards.

Technical parameters

Model			GTH2-63		GTH2-100		GTH2-160		GTH2-250						GTH2-400/630			GTH2-1600
GB/T14048.3 IEC60947-3
Ruted heatig	(A)		63		100		160		250					400		630			1000 1600
	Rated current (A)			6~40 50 63			80 100		125 160					180200225 250			315400500		630		800 1000	12501600
Rated insulation voltage	Ui(v)		800			800		800		800						800					800
Medium strength	(kv)		5			5		5		5			8			10
Wted impvostage	Uimp(kv)		8			8		8		8				12					12	8001000
	Rated working le(A)		AC-20B			1								！	-							1250	1600
			AC-21B		-		1				-	1	−	-	315		400	500		630			-
			AC-23A6~40		50	63	80	100	125	160	180	200	225	250		1					一
Motor power Rated short-		P(kW)		18.5 2525		40	40	63	80		100 100	132	132	160		220 280		315	560560	560			560
circuit making capacity		Icm(kA)		11.9		17			17		17			30					1
Witstshortimnt		Icw(kA/1s) 7				10		10		10		18				20
Mechanical life (Times)			10000		10000		10000				10000				5500 14.5 37		34		4000				3000 60
Operating torque Overall Width (W)(3/4) dimensions (mm)			1.2 83.5/105		1.2 83.5/105		6.5 140/170		10 180/230		230/290

-None

GTHR2

Series Isolation switch fuse group

GT HR2 160 3P C J S → → √ ↓ → ↓ → Enterprise Product Conventional Poles Operationmethod Handleoperation Auxiliarycontact code code thermalcurrent position
Jubang Group Isolation 63:63A 2P Standard configuration: Standard configuration:Standard configuration: No
Co., Ltd switch fuse 80:80A 3P Front operation cabinet operation auxiliary contact (Unlabeled) group 100:100A 4P (Unlabeled) (Unlabeled) Typel:S-NO+NC 125:125A 3+N:N-pole is C:Side operation J:Outside cabinet Type Il:F-NO+NC 160:160A a neutral pole operations 250:250A that can be 400:400A turned on or off 630:630A

Selectioninstructions

Product features

·Rated voltage40oVsuitable forAC50Hz;
·Used for infrequent connectionand disconnection of circuits;
·ComplieswithGB/T14048.3and IEC60947-3standards.

Model specifications

Model	Conventional thermalcurrent(A)	Ratedcurrentoffuse link(A)									Fusiblelinksize
		63	80	100	125	160	180	200	225	250	315	350	400	500	630	00	0 1	3
GTHR2-63	63
GTHR2-160	160
GTHR2-250	250
GTHR2-400	400
GTHR2-630	630

Notes:Model RT16-00 (NT00) of fuse body

Technicalparameters

Model			GTHR2-160	GTHR2-250	GTHR2-400	GTHR2-630
GB/T14048.3 IEC60947-3
Fusible link size RT16			00或0	1		3
Fused link loss power	(W)	AC660V	9.6	18.3	26	40.3
Rated insulation voltage	Ui(V)		750	750	750	1000
Medium strength	(V)		6000	6000	6000	8000
tedionewitydtage	Uimp(kv)			8	8	12
Rated impulse current le(A)	400V	AC22 cosΦ = 0.65	160	250	400	630
	400V	AC23 cosΦ= 0.35	160	250	400	630
	660V	AC22 cosΦ = 0.65	160	250	400	500
	660V	AC23 cosΦ= 0.35	125	200	250	315
	230V	DC23L/R=15ms	160	250	315	400
	440V	DC23L/R=15ms	125	200	200	315
Motor power (kW)	400V		80	132	220	355
Motor power (kW)	400V		110	220	295	400
Rated limiting short-circuit current	660V (kA Rms)	400V	100	100	100	100
Rated limiting short-circuit current	660V (kA Rms)	660V	50	50	50	50
Rated connection capacity	(A)		1600	2500	4000	6300
Rated breaking capacity (A)	(A)		1280	2000	3200	5000
Mechanical life	(Number of operating cycles)		10000	10000	10000	5000
Electrical life	(Number of operating cycles)		1000	1000	1000
Operating torque	(Nm)	Side operation		8	10	1000 42
Operating torque	(Nm)	Positive operation	6 10	12	15
Weight	(kg)				4.8	42 16
Weight	(kg)	3P 4P	1.8 2.3	3.2 4.5	6.1	19

Notes: The weight column data is for reference only

GTCPS

Series Control and protection switchequipment

Selectioninstructions

GT	CPS	D	CPS	S	M	45A	06	M	F
→	→	→	→	→	→	→	→	→	→
Enterprise code	Product code	Combination type	Frame level	Breaking capacity	Releasetype	Ratedcurrentof therelease	Auxiliary contact	Control power supplyvoltage	Additional selection function
Jubang Group Co., Ltd	Control and protection switch equipmentN:Reversible	None: Start directly D:Dual speed	45:45A 125:125A J1:Star Triangle Type1	S: Normal type H: High breaking	M: Motor protection type L： Distribution	45: 1A,3A,6A, 12A,16A,25A, 32A,45A 125: 63A,80A,	06: 3NO2NC 09: 4NO3NC	M: 220V Q:380V	F: Fire protection type L:LeakAge type T: Communication

Product features

·Integrated design of control and protection,witha control power range of O.05\~55kW;
·Comprehensive control and protection of motor loads and distribution loads;
·Complieswith GB/T14048.9and IEC60947-6-2 standards;
·It can achieve various requirements such as isolation,fire protection, communication,etc.

Technicalparameters

Model		GTCPS-45 GTCPS-125
GB/T14048.9
IEC60947-6-2 Frame level current	Inm(A) 45
Operating frequency	f(Hz)	50						125 50
Rated working voltage Ue(V)	AC 400							AC 400
Main body rated	le(A)	1 3	6	12	16	25	32	45	63 80	100	125
Rated working current of therelease	Ir(A)	0.4~1	1.2~3 2.4~6	4.8~10	6.4~16	10~25	12.8~32	18~45	25.2~6332~80	40~100	50~125
Control power range	(kW)	0.12~0.3	0.12~1.1 0.55~2.2	0.55~4.0	2.5~6.5	4~11	4~15	7.5~22	18.5~3018.5~37	18.5~45	18.5~55
AC400 Rated insulation voltage	Ui(V)	690						690
Short circuit breaking capacity	Ics(kA) 15(S)、35(H)							15(S)、35(H)
Averagepower contro eiricutCuay)	Start-up	150						150
	Keep	12						12
Action time(ms)	Suction	9~25						9~25
	Release	7~20						7~20
Servicelife (10000 Times)	Mechanical life 500							500
	Electi-43) 100							100
Usagecategory		AC-43、AC-44						AC-43、AC-44

GTB6

SeriesMinicircuitbreaker

Selectioninstructions

Technicalparameters

GTB6LE 63 3P C 63A OF √ ↓ ↓ ↓ ↓ ↓
Productcode Frame level Poles Tripping curve Ratedcurrent Electricalaccessoriesand functions
LeakAge circuit 63 1P+N C:C-type 6A,10A,16A, Standard configuration:
breaker 2P D:D-type 20A,25A,32A, Noaccessories (Unlabeled) 3P 40A,50A,63A OF:Auxiliary contact 3P+N SD:Alarm contact 4P MX+OF:Shunt release +Auxiliary contact

Technicalparameters

GTB6LE-63seriesMiniearthleakagecircuitbreaker(RCBO)

GB/T16917.1 1P+N 2P 3P
IEC61009-1 Poles							3P+N		4P
Electrical performance
Functions			Short circuit protection,overload protection,leakAge protection (AC type),control
Rated frequency	f(Hz) 50
Rated working voltage	Ue(V)	AC 230(1P+N)、AC 400(3P、3P+N、4P)
Rated current	In(A)	6，10,16,20,25,32,40,50,63
Rated insulation voltage	Ui(V)	400
Rated impulse withstand voltage	Uimp(kv)	4
Rated short-circuit breaking capacity	Icn(kA)	6
Rated residual operating current	I△n(mA)	30
Instantaneoustrippingcharacteristics	C:5In~10In，D:10In~14ln
Electrical life	Actuale 4000 Standard
Service life (O~C) Mechanical life		specified 4000 value
		Actual 10000 average
		Standard specified value	10000
Connectionand installation Protection level			IP20

Wiring capability		（mm2） ≤25
Operatingambienttemperature (℃C）			-5~+40
Damp heat resistance		Category2
Altitude （m）			≤2000
Relative humidity			At+20℃,not exceeding95%；At+40℃,not exceeding 50%
Pollution level 2
Installationenvironment			Placeswithout significantvibrationand impact
Installationcategory Level I
Installation method DIN standard guide rail
			Width (W)	54 72 103 117 135
dimensions(m)				Length (L)	97(MAX) 97(MAX)		97(MAX)	97(MAX)
				77.5(MAX)	79(MAX)	79(MAX)	79(MAX)	97(MAX)
			Height (H)					79(MAX)

GTB6LE-80

SeriesMiniearthleakagecircuitbreaker

GTB6LE 80 M 2P C 63A OF → ↓ √ √ √ 4 ↓
Productcode Frame level Breaking capacity Poles Trippingcharacteristics Ratedcurrent Electrical accessoriesand functions
LeakAge circuit 80 Standard 1P+N C:C-type 6A,10A,16A, Standard configuration:
breaker configuration:3000A 2P D:D-type 20A,25A,32A, Noaccessories (Unlabeled) (not indicated) 40A,50A,63A OF:Auxiliary contact M:6000A SD:Alarm contact MX+OF:Shunt release +Auxiliary contact

Technicalparameters

GTB8LE-80seriesMiniearthleakagecircuitbreaker
GB/T16917.1 IEC61009-1
Poles		1P+N 2P
Electrical performance
Functions		Short circuit protection,overload protection,leakAge protection (AC type),control
Rated frequency		f(Hz) 50
Rated working voltage		Ue(V) AC 230(1P+N、2P)
Rated current		6,10,16,20,25,32,40,50,63
Rated insulation voltage		Ui(V) 500
Rated impulse withstand voltage		Uimp(kV) 4
Rated short-circuit breaking capacity		Icn(kA) 3、6
Rated residual operating current		1n(mA)	30、50、100
Instantaneous trippingcharacteristics		C:	5In~10In、D:10In~14ln
Service life(O~C)	Electrical life	Actualaverage 4000
	Stendfed value	4000
	Mechanical life	Actualaverage 10000
		Stenified value	10000
Connectionand installation Protection level		IP20

Wiring capability		(mm2)	≤25
Operatingambienttemperature		(C）	-5~+40
Damp heat resistance			Category2
Altitude		(m)	≤2000
Relative humidity		2	At+20℃,not exceeding 95%；At+40℃，not exceeding50%
Pollution level
Installationenvironment				Placeswithoutsignificantvibrationand impact
Installationcategory				Level III
Installation method				DIN standard guide rail
dimensions(mm)			Width (W)	36(MAX)
			Length (L)	81(MAX)
			Height (H)	77.5(MAX)

GTB7Z SeriesMini DCcircuitbreaker

Selectioninstructions

GT	B	7	Z	63	3P	C	63A	/ MX	DC250
→	↓	→	√	→	→	→	↓	↓	√
Enterprise code	Productcode	Design NO.	Function code	Framelevel	Poles	Ratedshort- circuitcapacity	Ratedcurrent	Electrical accessories	Ratedvoltage
Jubang Group Co., Ltd	Mini circuit breaker	7	DC circuit breaker	63	1P 2P 3P 4P	B:B-type C:C-type	1A,2A,3A,4A 6A,10A,16A 20A,25A,2A 40A,50A,63A	Standard configuration: No accessories (Unlabeled) OF:Auxiliary	1P:DC250V 2P:DC500V 3P:DC750V 4P:DC1000V

Technical parameters

GTB7Z-63seriesMiniDCcircuitbreaker
GB/T14048.2 IEC60947-2
Poles				1P 2P		3P	4P
Electrical performance				Short circuitprotection,overload protection,isolation,cotro
Functions
Rated working voltage		Ue(V)	DC250 1,2,3,4,6，10,16,20,25,32,40,50.63	DC500	DC750	DC1000
Rated current		In(A)	1000
Rated insulation voltage		Ui(V) Uimp(kv)	6
Rated impulse withstand voltage
Usagecategory				ClassA
Instantaneous release type				B=6ln(1±20%)，C=12In(1±20%)
Rated short-circuit breaking capacity Ics=Icu(kA)				10
Release type				Thermomagnetic type
Service life(O~C)	Electrical life		Actual average 4000 Standard specified
			4000
			Actualaverage 10000 Standard specified 10000
Mechanicallife Connectionand installation
Protection level				IP20
Wiringcapability （mm2）				≤25
Operatingambient temperature (C)
				-5~+40
Damp heat resistance				Category2
Altitude （m）				≤2000
Relative humidity				≤95%
Pollution level				2
Installation environment				Placeswithout significant vibrationand impact
Installationcategory				Level III
Installation method				DIN standard guide rail
Overall dimensions (mm)				Width (W) 18（MAX)	36(MAX)	54(MAX)	72(MAX)
			Length (L)	81(MAX)	81(MAX)	81(MAX)	81(MAX)
				Height (H) 77(MAX)	77(MAX)	77(MAX)	77(MAX)

DZ30

SeriesMinicircuitbreaker

DZ 30 32 H 2P C 32A D → → → → 一 → → →
Product code Design NO. Framelevel Breaking capacity Poles Tripping curve Ratedcurrent Incomingmethod
Mini circuit 30 32 Standard 2P C:C-type 6A,10A,16A Standard configuration:
breaker 32H configuration: D:D-type 20A,25A,32A Upper incoming line 3kA (not indicated) (Unlabeled) H:4.5kA D:Lower incoming line

Technicalparameters

DZ30seriesMinicircuitbreaker
GB/T10963.1 IEC60898-1
Poles
Electrical performance
Functions			Short circuit protection,overload protection,isolation,control
Rated frequency			50
Rated working voltage		Ue(V)	AC230
Rated current			6,10,16,20,25,32
Rated insulation voltage			400
Rated impulse withstand voltage			4 3
Current limiting level
Instantaneous tripping characteristics			C:5In~10In，D:10In~14ln
Rated short-termbreaking capacity			32:3、32H:4.5
Release type			Thermomagnetic type
Service life(O~C)	Electrical life	Actualaverage	4000
		Standard specified value	4000
	Actual average Mechanical life	10000 10000

Connectionand installation Protection level			IP20

Wiring capability		（mm2）	≤16
Operatingambient temperature
Damp heat resistance			-5~+40 Category2
Altitude
Relative humidity
Pollution level
Installation environment
Installationcategory
Installation method
dimensions(mm)		Width (W)		DIN standard guide rail 18(MAX)
			Length (L)	79(MAX)
			Height (H)	76(MAX)

Selectioninstructions

Technicalparameters

DZ3OLEseries Mini earth leakagecircuitbreaker
GB/T16917.1 IEC61009-1
Poles
Electrical performance
Functions				Short circuit protection,overload protection, leakAgeprotection (ACtype),isolation,control
Residual current type				AC
Rated frequency				50
Rated working voltage				AC230
Rated residual operating current				30
Rated current				6,10,16,20,25,2
Rated impulse withstand voltage
Instantaneous tripping characteristics				C:5In~10In
Rated short-circuit breaking capacity
Service life (O~C)	Electrical life	Icn(kA) Actualaverage	4000
		Standard specified value	4000
		Actualaverage	10000
Mechanical life				10000
Connectionand installation
Protection level				IP20
Wiring capability				≤16
Operating ambient temperature				-5~+40
Damp heat resistance				Category2
Altitude				≤2000
Relative humidity				At+20℃,not exceeding 95%；At+40℃,not exceeding 50%
Pollution level
Installation environment				Placeswithoutsignificant vibrationand impact
Installationcategory				Level I
Installation method				DIN standard guide rail
dimensionstmm)			Width (W)	36(MAX)
			Length (L)	79(MAX)
				Height (H)

GTH1S-125 Serieslsolationswitch

Selectioninstructions

Product features

·Hashighdynamicandthermalstabilitymainlyusedasthemainisolationswitchinterminalcombinationelectricalappliances;
·Suitable for distribution and control circuitswith AC 5 0 H z rated voltage 40oVand below,and canalso beused to control various types of motors,low-powerappliances,and lighting;
·Widelyused in industrialand miningenterprises,high-risebuildings,commercialand householdsettings;
·Complies with GB/T14048.3 and IEC60947-3 standards.

Technicalparameters

GTH1S-125seriesisolationswitch
GB/T14048.3 IEC60947-3
Poles				1P 2P		3P	4P
Electrical performance
Rated frequency f(Hz)				50
Ratedworking voltage				AC230 AC400
Rated current		Ue(V) In(A)	32,63,80,10025
Rated impulsewithstand voltage Uimp(kv)				4
Rated insulationvoltage				690
Rated short-time withstand current				1.5
Ratedshort-circuitmaking capacity		Icw(kA/1s) Icm(kA)	2.5
Service life (O~C)	Electrical life		Actualaverage 1500
	Standard specified value		1500
	Actual average Mechanical life Standard specified value		8500
Connectionand installation
Protection level
Usagecategory				IP20 AC-22A
（mm2)
Wiring capability				2.5~50
Operatingambient temperature (C）				-5~+40
Damp heat resistance				Category2
Altitude （m）				≤2000
Relative humidity				At+20℃,not exceeding 95%；At+ 40℃,not exceeding 50%.
Pollution level				2
Installationenvironment				Placeswithout significant vibrationand impact
Installationmethod				DIN standard guide rail
dimensions (m)			Width (W) Length (L)	18(MAX) 36(MAX) 54(MAX)				72(MAX)
				84(MAX)	84(MAX)	84(MAX)	84(MAX)
				Height (H)	71.5(MAX)	74(MAX)	74(MAX)	74(MAX)

GTB1

Series Self-recovery overvoltage and undervoltageprotector

Selectioninstructions

① TheintellgenttypecomplieswiththeJB/T12762-2015"Self-recoveryovervoltageandundervoltageprotector"standard; ② 1P+Nand 3 P + N haveextremelycommonNvalues.

Notes:

Product features

·Itcanautomaticallyprotectandsafelycutoffthecircuitduringcontinuoushigh-voltageimpulsevoltageorundervoltage;
·Itanautomaticallconnectthecircuitwithinthespecifiedtimetoensurethenormaloperationoftheterminalelectricalsystem;
·Itcanserveasaprotectionforsingle-phaseelectricalequipmentagainstovervoltageandundervoltagecausedbyneutralinefaults.

Technicalparameters

GTB1seriesSelf-recovery overvoltageand undervoltageprotector
JB/T12762			20A,25A,32A 40A,50A,63A		80A,100A,125A
Poles			1P+N 3P+N		1P+N	3P+N
Electrical performance
Rated frequency f(Hz)
Rated working voltage	Ue(v)	50 AC230	AC380		AC 230	AC380
Rated impulse withstand voltage	Uimp(kv)	4
Overvoltage protection value			AC275V±5V	AC460V±15V	AC275V±5V	AC460V±15V
Overvoltage recovery value			AC250V±5V	AC430V±10V	AC250V±5V	AC430V±10V
Undervoltage protection value			AC175V±5V	AC300V±15V	AC175V±5V	AC300V±15V
Undervoltagerecoveryvalue			AC190V±5V	AC335V±10V	AC190V±5V	AC335V±10V
Protection action delay time			1min±20s

Connectionand installation
Protection level			IP20
Wiring capability （mm2)			1~50
Operatingambient temperature (C)			-5~+40
Damp heat resistance （m）			Category2
Altitude Relative humidity			≤2000
Pollution level				At+20℃,not exceeding 95%；At+ 40℃,not exceeding 50%. 3
Installation environment					Places without significant vibrationand impact
Installation method				DIN standard guide rail
dimensions (mm)		H	Width (W)	36(MAX)	72(MAX)	54(MAX)	108(MAX)
			Length (L)	77(MAX)	77(MAX)	77(MAX)	77(MAX)
			Height (H)	66(MAX)	66(MAX)	66(MAX)	66(MAX)

GTAF Series Arc fault protector

Selectioninstructions

GT AF 63 2P C 63A T ↓ → → → → → ↓
Enterprise code Productcode Framelevel Poles Tripping curve Ratedcurrent Communication
Jubang Group Arc fault protector 63 2P C-type 6A,10A,16,A Standard configuration: No Co., Ltd 20A,25A,32A, communication function 40A,50A,63A (Unlabeled) T·Cnmmiiniratinn functinn

Product features

·Advancedarcidentificationtechnologycanpreventfirefromignitingavoiddisastersausedyectricalaccidentsandcurbthe occurrence of electrical fires;
·GB/T31143 General Requirements for Arc Fault Protection Devices (AFDD);
·IEC 62606 "Arc Fault Protection Devices (AFDD)".

Technicalparameters

GTAFseriesarc faultprotector	GTAF-63
GB/T31143 IEC62602
Poles
Electrical performance
Rated frequency	50
Ratedworking voltage	AC230
Rated current	6,10,16,20,25,32,40,50,63

Rated short-circuit breaking capacity	6
Trippingcharacteristics	C:5In~10In
Minimum series and parallel arc currents	String arc:5；Parallel arc：75
Interference level of electrostaticdischarge reactance	Air discharge >8；Contact discharge>6
Pulse group anti-interference degree	4
Surge resistance	4
Connectionandinstallation
Protection level	（mm2）	IP20 1~25
Wiringcapability	(C）	-5~+40
Operatingambient temperature Damp heat resistance		Category2
	（m）	≤2000
Altitude Pollution level		2
		Places without significant vibrationand impact
Installation environment		Level II
Installationcategory Installation method		DIN standard guide rail
dimensins(m)	Width (W)	72(MAX)
	Length (L)	99（MAX)
	Height (H)	74(MAX)

BSMJ

Series Self-healing shunt capacitor (Three-phase co complementation)

Selectioninstructions

B S MJ 0.45 15 3 → → ↓ ★ ↓ → Seriescode Immersiveagentcode Mediacode Ratedvoltage Ratedcapacity Phasenumber Shunt capacitor S-Microcrystalline wax Metallization 0.45kV line voltage 15:15kvar 3:Three-phase Polypropylene film 1:Single-phase

Productfeatures

·Selfhealinglwvotageparallapacitoresitableforlowvotagepowerystemsitfequencesof5zor6Hzyreinly usedtoimproveowerfactoduceeactiveowersimprovevagualityndtaptotranformerapacityetest energy-saving products strongly recommended by the country;
·Usinghigqualitymetalidpyproylfiasthmedim,thuniquestructuraldesinmakesthcapacitorsmallrinolud lighter in weight;
·Byadoptinganewtypeofgoldsprayingproessandauniquemetalzedfimedgethickeningtechnology,thecapacitor'sabilityto resistwavestleifesablinieatleedtefs reduced,the heat generation islow,the temperatureriseislow,andtheenergy-savingeffectisexcellent;
·Excellntself-ealingperformanceensuresthatlocalbreakdownofthemediumcanquicklyselfhealrestoreoraloperationd greatly improve reliability;
·Usingmicrocrystalinwaxasanimpregnatingagent,itdoesnotleakoilduringnormaltemperatureuseavidingenvironmental pollution,and has the advantages of both dry and impregnated capacitors.

Technicalparameters

Model		0.45- 3-3	0.45-4-3	0.45-5-3	0.45-6-3	0.45-7.5-3	0.45-8-3	0.45-10-3	0.45-12-3
GB/T12747 IEC60831
Rated voltage	UN(kV)	0.45	0.45	0.45	0.45	0.45	0.45	0.45	0.45
Rated capacity	QN(kvar)	3	4	5	6	7.5	8	10	12
Rated frequency	fN(Hz)	50.60
Rated capacitance value	CN(uF)	47.2	62.9 78.6		94.3	117.9	125.8	157.2	188.6
Rated current	IN(A)	3.8	5.1	6.4	7.7	9.6	10.3	12.8	15.4
Capacity tolerance
Loss angle tangent value		-5%~+10% -5%~+10%
Withstand voltage
Maximumallowableovervoltage		1.1×UN，not exceeding 8hours every 24/J/hour; 1.15×UN,not exceeding 30minutesevery24/J/hour; 1.2×UN，not exceeding 5minutesevery24/J/hour;
Maximumallowable current
Connection method		△connection method,Y-star delta connection method,☆ stardelta connection neutral point lead out connection method.. various connection methods such as three-segment,single-phase,etc
Self discharge performance
Outgoing terminal			M6

Environment				It should beensured to work under good ventilation conditions,and it is not allowed to work in a dosed and non ventilated environment
		Altitude not exceeding 2000 meters
		Width (W)

dimensions (mm) Installation			Length (L)	208 66
			Height (H) 150
			Width (W)	188
plate hole size (mm)			Height (H) 40

			7

	0.45-14-3	0.45-15-3	0.45-16-3	0.45-18-3	0.45-20-3	0.45-25-3	0.45-30-3	0.45-35-3	0.45-40-3	0.45-50-3

	0.45	0.45	0.45	0.45	0.45	0.45	0.45	0.45	0.45	0.45
14		15	16	18	20	25	30	35	40	50

	220.1	235.8	251.5	282.9	314.4	393.2	471.8	550.2	629.1	786.3
18		19.2	20.5	23.1	25.7	32.1	38.5	44.9	51.3	64.2



1.3×UN，not exceeding1minutes every 24/J/hour;
The maximum transitional overcurrent shall not exceed 1.43× IN

											M10
M8 The average temperature within a year shall not exceed 30℃




215						95 245 198	295			335

BSMJ

Series Self-healing shunt capacitor (Three-phase split complementation)

Selectioninstructions

B S MJ 0.25 5 3 YN → → ↓ → → → → Seriescode Immersiveagent Mediacode Rated voltage Ratedcapacity Phasenumber Connectionmethod Shunt capacitorS-Microcrystalline wax Metallization 0.25kV phase voltage 5:5kvar 3:Three-phase YN:Internal star connection Polypropylenefilm method forcapacitorwith neutral noint lead out

Product features

·Selfealinglow-voltageparlelcapacitorsaresitableforow-vltagepowersystemswitfrequencesof5zoHz.Teyreminly usedtoimprovepowerfactoreducereactivepowerlossimprovevotagequalityandtapintotransformercapacity
·Theuseofmdummateralsndtechnologicaadvancementsasesutedismallue,ligtereghttrongerresistacetoes and currents,more stable performance,and lower self loss;
·Adoptingthe-pasesplitpaseswitchingcapacitorethod,ompensatingreactivepowerinsplitpase,withighercomesation accuracyand better energy-saving effect;
·Three independent unitsare connected to discharge resistors for safer use.

Technicalparameters

			BSMJ0.25-3-3YN BSMJ0.25-5-3YN BSMJ0.25-8-3YN BSMJ0.25-10-3YNBSMJ0.25-12-3YN
Model GB/T12747
IEC60831 Rated voltage UN(kV)			0.25	0.25	0.25	0.25	0.25
Rated capacity			3 5		8	10	12
QN(kvar) Rated frequency fN(Hz)			50.60
Rated capacitance value CN(uF)			153	254	407	510	615
Rated current IN(A)			12	6.6	32	13.2	16
Capacitytolerance			-5%~+10%
Loss angle tangent value			-5%~+10%
Withstand voltage			t
Maximumallowable overvoltage			1.1×UN，not exceeding 8hours every 24/J/hour; 1.15×UN,otexceeding30mutesevery24/ur; 1.2xUN，not exceeding5minutesevery24/J/hour;
Maximumallowable current			Allow current not to exceed 1.3× Running under IN,transient overcurrent, considering theeffectsof overvoltage,positivecapacitancedeviation,and harmonics
Connectionmethod			Y-star delta neutral point lead out (standard N-terminal)
Self discharge performance			After the capacitor ispowered off, the remaining voltagedrops from2within3minutesxUN dropsbelow50V
Outgoing terminal			M6 Temperature category-25℃,minimum temperature-25℃
Environment			maximumtemperaturecategoryC(maximumnot exceeding50℃， average temperaturewithin24 hours not exceeding 40℃） It should beensured towork under good ventilationconditions,
			and it is not allowed to work in aclosed and non ventilated environment Altitude not exceeding 2000 meters

dimensions (mm)			Width (W) 208 Length (L) 66
				245
	Installation plate hole		Height (H)	155 160 215
Width (W) Height (H)			188
	7	40

			BSMJ0.25-15-3YN BSMJ0.25-16-3YN BSMJ025-18-3YN BSMJ0.25-20-3YNBSMJ0.25-25-3YNBSMJ0.25-30-3YN

	0.25	0.25	0.25	0.25	0.25	0.25
	15	16	18	20	25	30

	764 20	815 21.3	917 24	1019 27	1274 33.3	1529 40



1.3×UN，not exceeding1minutesevery24/J/hour;
Themaximum transitional overcurrent shallnot exceed 1.43×IN


M8
Theaverage temperature withina yearshall not exceed 30℃


216 95
285
335
198
60

GTZN
Series Intelligent power
capacitors

Selectioninstructions

GTZN S 450 10 （ 5 + 5 ↓ ↓ → ↓ √ → Capacitor type Compensation Ratedvoltage Totalcapaityofsmart Firstgrtaup Second group Intelligent low-voltage S-Cocomplementation 250 phase voltage 10:10kvar 5:5kvar 5:5kvar powercapacitors F-Split complementation 450 phase voltage

Productfeatures

·The perfectcombinationof measurementandcontroltechnologywithsynchronousswitches hasbeenachieved,controlingthe movementspeedoftheswitchingswitch,eliminatingbouncingandimprovinglifespan.Thecosingphaseanglehasbeentrackedand corectedndidiliinglifssmpdtielitoaisftind ithasmanyadvantagessuchas highreliability,low fault,low powerconsumption,and long servicelife;
·Closingiotsurrntchossinapaaurrnteurtuttinossicneely avoiding switching overvoltage,no overvoltage breakdown,noarc pulling and reignition;
·Theproducthascompletemeasurementandprotectionfunctions,withspecialprotectionssuchasinternaltemperatureofcapacitors harmonic content of the power grid,phase failure,and three-phase imbalance;
·Theproductcanbeusedwithmultiplebuildingblocksandmultipleunitscanbecombinedtoformareactivepowerautomaticcontrol system,witha higherdegreeof intelligence;
·Theindividualapacitodisplasteproductsperatigoditiosadelectricalitonditiosndteumaainaloge concise and intuitive.

Technicalparameters

				S450-5(2.5+2.5) S450-10（5+5)		S450-15(5+10）S450-20(10+10）S450-25(10+15)
Model GB/T15576
Rated voltage		0.45
Rated total capacity		QN(kvar)		10	15	20	25
Groupcapacity	(kvar)		2.5+2.5	5+5	5+10	10+10	10+15
Rated frequency	fx(Hz)		50,60
Compensationmethod
				Co complementation AC 220V/380V
				Working voltage Voltagedeviation	+20%
				Current waveform	Current harmonics not exceeding 10%
				Voltage waveform
				Working frequency	Sine wave,witha total distortion ratenot exceeding 5%
Power consumption	48.5~51.5Hz
Electrical safety			Theelectrical clearanceandcreepagedistance,insulationstrength,safetyprotection, short-circuit strength,and the use and control circuit protectionall comply
		Temperature	with therequirementsof thePeople'sRepublicofChina ElectricPower
Environment condition	Relative humidity	-40~+40°℃ 40°℃，20~90%
	Control accuracy	100%
Reliability parameters	Control allowable frequency	1 million times
	Voltage
Protection error	Current	≤0.5% ≤0.5%
	Temperature
	Voltage	±1℃ ≤0.5%
	Current
	Power factor	≤0.5% ≤±1.5%
Onlinecommuniction
					Temperature
A0.3meters	RS485 Installed betweencapacitorson the same layer
Select communication cables according to actual needs					Installed betweencapacitorsondifferent layers
					B0.8meters C3.0meters			Between capacitor and controller
Secondary current transformer	Co complementation	Current sampling is used for automatic compensation of total co compensation
	Split complementation	whenthere isnocontroller,optional asneeded Whnteetrasdtat
Overall dimensions (mm) 山		Length (L)	380
		Width (W)	80
		Height (H)	245
Installation plate hole size (mm) 中		Width (W)	360 50
		Height (H)

	S450-30(20+10）S450-35(15+20） S450-40(20+20） S450-50(25+25)F250-5F250-10 F250-15F250-20F250-25F250-30


	30	35	40	50	0.25 5	10	15	20	25	30
	20+10	15+20	20+20	25+25	-		-		-	-

Splitcomplementation





ThecorrespondingclauserequirementsintheindustrystandardDL/T842"Conditionsforuseoflow-votageparalelcapacitor
devices" GB/T22582 "Power factor compensation devices for low-voltage power capacitors"

















315 245 275

GTZNK

Series Anti-harmonic intelligent capacitor

Selectioninstructions

Notes:Productswitha harmonicrejectionrate of 7 % are mainly used in situationswith high harmonic content of 5thand above; Productswitha harmonic rejectionrateof 14 % are mainly used in situationswith high harmonic contentof 3rd and above.

Product features

·Theanti-harmonicinteligentcapacitorisanindependentandcompleteinteligentcompensationunitcomposedofaninteligent measurementdtrnittellosieltelltoteonitaef capacitor,anda dryseriesreactor;
·Theproductismainlyusedforreactivepowercompensationinsituationshereharmonicsareverysevere.Itcanoperatereliablywithout generatingresonanceasoamplficatioectonarmonicsandastefunctionofabsobingandelinatingharmonicstocertan extent.The product with a 7 % reactorinseriesisusedinelectricalenvironmentswhere themain harmonicsare5th,and theproduct with a 14 % reactor in series is used inelectrical environmentswhere the main harmonicsare 3rd;
·Theproducthascompletemeasurementandprotectionfunctions,withspecialprotectionssuchasinternaltemperatureofcapacitors, harmonic content of the power grid,phase failure,and three-phase imbalance;
·Theproductcanbeusedintheformofmultiplebuildingbockscombinedtoformareactivepowerautomaticcontrolsystemwitha higherdegree of intelligence.

Technicalparameters

	S480-5-7		S480-10-7	S480-15-7	S480-20-7	S480-25-7
Model GB/T15576
Rated voltage
Rated total capacity	UN(V) QN(kvar)	480	10	15	20
Harmonic rejection rate		Seriesconnectionof7% reactor
Rated frequency		50,60
Compensation method		Co complementation
	working voltage	AC 220V/380V
Power supply conditions Voltagedeviation
	+20%
	Power consumption
Environmentcondition		-40~+65℃
Altitude	Relative humidity	40℃，20~90%
Voltage		≤2000m
		≤0.5%
Protection error	Current	≤ 1.0%
Time	Temperature	±1℃
		±0.01s
	Voltage	≤0.5%，(80%~120%)×UN
Measurement error	Current	≤1.0%N(5%~20%） xl；≤0.5% (20%~120%) xl
	Powerfactor	≤±1% ±1℃
	Temperature
Reactive power control	Reactive power control error
parameters	Reactive capacity	Singleunit≤40kvar(Three-phase)
		≤ 20kvar(Phase separation)
Zero switching switch parameters	Zero switching offset	≤2.5
	Voltage withstand impulse RS485	AC2500V(DC4000V)
Onlinecommunication
Overall 4 dimensions （mm)	Length (L)	480
	Width (W)	165
Installation plate hole size (mm)	Height (H)	440
	Width (A)	170
	Height (B)	150

S480-30-7	S480-40-7	F280-5-7	F280-10-7	F280-15-7	F280-20-7	F280-30-7

		280
30	40	5	10	15	20	30


		Split complementation

JKW

Series Intelligent capacitor controller

Selectioninstructions

Product features

·Thisserietellntapaisfullciotrolbstalltisyt operation;
·ThisproductcanbeusedwiththeGTZNseresitellgentcapacitorsndGTZKseriesantiarmonicinteligentcapacitorsproducedby ourcompany and the 485 communication control of the composite switch;
·Itcanreplace7metersandswitchesontheexistinglow-vtagereactivepowercompensationcabinetaswellasallcapacitorstatus indicatorlights,making the layout of the compensation cabinet extremely simpleand saving alotof wiring;
·Automatic switching control can be carried out based on the control of physical quantities;
·Predictable cutting effect for cutting and control;
·Equippediteaerdfeoteieceleatiootedi protection.

Technicalparameters

Model		JKW-32S	JKW-32Y
Displaymethod		Digital tube	Liquid crystal
Nuntrolcircuts		32	32
Poweitrisuply	Working voltage	AC380V,50Hz
	Voltage deviation
	Power consumption
Environment condition	Temperature	-40~+55°℃
	Relative humidity	40°℃，20~90%
	Atmospheric pressure	79.5~106.0kpa
Measurement	Voltage	Level 0.5
	Current	Level 0.5
	Active power	Level 1.0
	Reactive power	Level 1.0
	Power factor	±0.1
Control accuracy	Power factor	±0.01
	Reactive power	±120%of the minimum capacitor capacity
Appearance dimensions	Width × Height × Depth (mm)	120×120×90
Opening size	Width × Height (mm)	113×113
Communicationmethods		RS485

CJX2 SeriesACcontactor

Selectioninstructions

Product features

·SuitableforACircuitswithafrequencyof50/6ztageupto660Vandhatingcurrentbelow00Aprovidinglongstance conectionadotioitlrntsatidtrfotosatinlgingwio transformercontrol distribution circuits,industrial distribution,green powerdistribution;
·For frequent movements and harsh usage conditions,it is recommended to use quick action coils;
·Thecontactpointisadeofspeciallyadesilelloywhichhasgoodelectricalwearresistanceandweldingesistanceandthe product hasa longer servicelife;
·Thearcextinguishingchambeadoptsfullflameretardanthigperformancemateralshichhavegoodarcextingushingdielectric properties and more stable product performance;
·Thecurrent specificationrangeiswide,withacoveragerange below95A,meetingvariousindustryapplications.

Technicalparameters

Model				CJX2-09	CJX2-12	CJX2-18	CJX2-25
GB/T14048.4 IEC60947-4-1
AC-3 Rated working current		le(A)		9	12	18	25
Conventional thermal current		Ith(A)		20	20	25	40
Rated working voltage Ue(V)				AC 400	AC 400	AC 400	AC400
Number of main contacts (NO)			3	3	3	3
Connectioncapability Icm(A)				10xle(AC-3)
Breaking capacity				8xle(AC-3)
Fuses used in the main circuit	lcn(A) Model		RT16-00(NT00)			RT16-00(NT00)RT16-00(NT00)
	Rated current In(A)		20		32	50
The main circuit terminal can		Maximum number of hard wires with a cross-sectional (mm2)	1		1		1
beequipped withcables (0≤55℃)		Maximum cross-sectional area of hard wire		2.5		4	10
		Screw diameter	M3.5				M4
Tightening torque Typesand logarithms		(N.m)	0.8				1.2
Auxiliary circuit				1NO,1NC
	Conventionalthermal	Ith(A)	10
Fuses used in auxiliary circuits(SCPD)		Model		RT28-32			RT28-32
		Rated current	In(A) 10			16
Auxiliary circuit terminals can		Maximumcross-sectional Maximumbross-sectional	(mm2)	1
		areaofcable （mm）	1.5
(0≤55℃)		Screwdiameter		M3.5
		Tightening torque		0.8
Protection level		Main circuit		IP20 prevents direct finger contact
Operation frequency		Coil terminals		IP20 prevents direct fingercontact 1200
Rated control circuit power		AC-3 Us
supply voltage		50Hz		AC230V,AC 400V,DefaultAC230V
Coiloperatingvoltage				0.85~1.1Us
(0≤55℃) Overall		Pull-in voltage (AC) Release voltage (AC)		0.2~0.75Us
		Width (W)		47				57
dimensions (mm)		Length (L)		76
		Height (H)		82			86 95
Intellateiomate		Width (A)			87 34.5		店 40
		Height (B)		国 48.5				0 42.5,48.5
				35mm guide rail or screw (M4) fixatio

GTT6

Selection instructions

Product features

Model specifications

Technicalparameters

GTH2

Product features

Technical parameters

GTHR2

Product features

Model specifications

Technicalparameters

Product features

Technicalparameters

GTB6

Technicalparameters

Technicalparameters

GTB6LE-80

Technicalparameters

Technical parameters

Technicalparameters

Technicalparameters

GTH1S-125 Serieslsolationswitch

Selectioninstructions

Product features

Technicalparameters

GTB1

Selectioninstructions

Product features

Technicalparameters

GTAF Series Arc fault protector

Selectioninstructions

Product features

Technicalparameters

Selectioninstructions

Productfeatures

Technicalparameters

Selectioninstructions

Product features

Technicalparameters

Selectioninstructions

Productfeatures

Technicalparameters

Product features

Technicalparameters

Selectioninstructions

Product features

Technicalparameters

Product features

Technicalparameters

快速跳转到指定页